Showing 1–50 of 54 results for author: Hattori, Y

An experimental study of inflow stability in a falling soap film

Authors: Yuna Hattori

Abstract: Inflow control is essential for most fluid mechanics experiments. Although vertically falling soap film flows have been extensively used in the last four decades to study two-dimensional flows, its inflow stability has not yet been discussed in detail. In this article, aiming to improve the inflow stability of the system, we discuss how flow driving systems dominate the inflow states and the stati… ▽ More Inflow control is essential for most fluid mechanics experiments. Although vertically falling soap film flows have been extensively used in the last four decades to study two-dimensional flows, its inflow stability has not yet been discussed in detail. In this article, aiming to improve the inflow stability of the system, we discuss how flow driving systems dominate the inflow states and the statistics of soap film flow properties. We report experimental measurements of inflow rates using different flow driving methods, followed by soap film velocity measurements by Laser Doppler Velocimetry (LDV). The widely-used method of a constant-pressure-head reservoir exhibits a continuous drop of inflow rate. In addition, even when the flow is not disturbed, the soap film displays high magnitudes of velocity fluctuations. The mean square of velocity fluctuation was measured at 4.6% of the mean. We also test other methods without the reservoir, where the flow is directly controlled by a pump; two staggered syringe pumps are able to maintain inflow stability over days and reduce the velocity fluctuation to 0.5% of the mean. From these measurements, we conclude that the drop of inflow rate might be caused by micro/milli-scale air bubbles, which cannot be completely removed in the system. A method to control the inflow actively is necessary in a soap film setup, when a stable and long standing film flow is needed. △ Less

Submitted 27 May, 2024; originally announced May 2024.

Gauging Centrifugal Instabilities in Compressible Free-Shear Layers Via Nonlinear Boundary Region Equations

Authors: Omar Es-SAhli, Adrian Sescu, Yuji Hattori

Abstract: Curved free shear layers emerge in many engineering problems involving complex flow geometries, such as the flow over a backward facing step, flows with wall injection in a boundary layer, the flow inside side-dump combustors, or wakes generated by vertical axis wind turbines, among others. Previous studies involving centrifugal instabilities have mainly focused on wall-flows where Taylor instabil… ▽ More Curved free shear layers emerge in many engineering problems involving complex flow geometries, such as the flow over a backward facing step, flows with wall injection in a boundary layer, the flow inside side-dump combustors, or wakes generated by vertical axis wind turbines, among others. Previous studies involving centrifugal instabilities have mainly focused on wall-flows where Taylor instabilities between two rotating concentric cylinders or Görtler vortices in boundary layers, resulting from the imbalance between the centrifugal forces and the radial pressure gradients, are generated. Curved free shear layer flows, however, have not received sufficient attention, especially in the nonlinear regime. The present work investigates the development of centrifugal instabilities evolving in a curved free shear layer flow in the nonlinear compressible regime. The compressible Navier-Stokes equations are reduced to the nonlinear boundary region equations (BRE) in a high Reynolds number asymptotic framework wherein the streamwise wavelengths of the disturbances are assumed to be much larger than the spanwise and wall-normal counterparts. We study the effect of the freestream Mach number $\boldsymbol{M_\infty}$, the shear layer thickness $\boldsymbolδ$, the amplitude of the incoming disturbance $\boldsymbol{A}$, and the relative velocity difference across the shear layer $\boldsymbol{ΔV}$ on the development of these centrifugal instabilities. △ Less

Submitted 4 March, 2024; originally announced March 2024.

Comments: 17 pages

MSC Class: 76N06; 76M45

Bour's theorem for helicoidal surfaces with singularities

Authors: Yuki Hattori, Atsufumi Honda, Tatsuya Morimoto

Abstract: In this paper, generalizing the techniques of Bour's theorem, we prove that every generic cuspidal edge, more generally, generic $n$-type edge, which is invariant under a helicoidal motion in Euclidean $3$-space admits non-trivial isometric deformations. As a corollary, several geometric invariants, such as the limiting normal curvature, the cusp-directional torsion, the higher order cuspidal curv… ▽ More In this paper, generalizing the techniques of Bour's theorem, we prove that every generic cuspidal edge, more generally, generic $n$-type edge, which is invariant under a helicoidal motion in Euclidean $3$-space admits non-trivial isometric deformations. As a corollary, several geometric invariants, such as the limiting normal curvature, the cusp-directional torsion, the higher order cuspidal curvature and the bias, are proved to be extrinsic invariants. △ Less

Submitted 8 March, 2024; v1 submitted 25 October, 2023; originally announced October 2023.

Comments: 21 pages, 9 figures

MSC Class: Primary 53A05; Secondary 57R45; 53A04; 53B25

Fermi surface and light quasi particles in hourglass nodal chain metal \b{eta}-ReO2

Authors: Daigorou Hirai, Takahito Anbai, Takako Konoike, Shinya Uji, Yuya Hattori, Taichi Terashima, Hajime Ishikawa, Koichi Kindo, Naoyuki Katayama, Tamio Oguchi, Zenji Hiroi

Abstract: Quantum oscillations in magnetic torque and electrical resistivity were measured to investigate the electronic structure of \b{eta}-ReO2, a candidate hourglass nodal chain metal (Dirac loop chain metal). All the de Haas-van Alphen oscillation branches measured at 30 mK in magnetic fields of up to 17.5 T were consistent with first-principles calculations predicting four Fermi surfaces (FSs). The sm… ▽ More Quantum oscillations in magnetic torque and electrical resistivity were measured to investigate the electronic structure of \b{eta}-ReO2, a candidate hourglass nodal chain metal (Dirac loop chain metal). All the de Haas-van Alphen oscillation branches measured at 30 mK in magnetic fields of up to 17.5 T were consistent with first-principles calculations predicting four Fermi surfaces (FSs). The small-electron FS of the four FSs exhibited a very small cyclotron mass, 0.059 times that of the free electrons, which is likely to be related to the linear dispersion of the energy band. The consistency between the quantum oscillation results and band calculations indicates the presence of the hourglass nodal chain predicted for \b{eta}-ReO2 in the vicinity of the Fermi energy. △ Less

Submitted 14 September, 2023; originally announced September 2023.

Comments: 11 pages, 8 figures, 2 tables

Journal ref: J. Phys.: Condens. Matter 35, 405503 (2023)

Topological surface states hybridized with bulk states of Bi-doped PbSb2Te4 revealed in quasiparticle interference

Authors: Yuya Hattori, Keisuke Sagisaka, Shunsuke Yoshizawa, Yuki Tokumoto, Keiichi Edagawa

Abstract: Topological surface states of Bi-doped PbSb2Te4 [Pb(Bi0.20Sb0.80)2Te4] are investigated through analyses of quasiparticle interference (QPI) patterns observed by scanning tunneling microscopy. Interpretation of the experimental QPI patterns in the reciprocal space is achieved by numerical QPI simulations using two types of surface density of states produced by density functional theory calculation… ▽ More Topological surface states of Bi-doped PbSb2Te4 [Pb(Bi0.20Sb0.80)2Te4] are investigated through analyses of quasiparticle interference (QPI) patterns observed by scanning tunneling microscopy. Interpretation of the experimental QPI patterns in the reciprocal space is achieved by numerical QPI simulations using two types of surface density of states produced by density functional theory calculations or a kp surface state model. We found that the Dirac point (DP) of the surface state appears in the bulk band gap of this material and, with the energy being away from the DP, the isoenergy contour of the surface state is substantially deformed or separated into segments due to hybridization with bulk electronic states. These findings provide a more accurate picture of topological surface states, especially at energies away from the DP, providing valuable insight into the electronic properties of topological insulators. △ Less

Submitted 29 September, 2023; v1 submitted 24 May, 2023; originally announced May 2023.

Comments: 6+14 pages, 4+8 figures

Journal ref: Phys. Rev. B 108, L121408 (2023)

Experimental verification of band convergence in Sr and Na codoped PbTe

Authors: Yuya Hattori, Shunsuke Yoshizawa, Keisuke Sagisaka, Yuki Tokumoto, Keiichi Edagawa, Takako Konoike, Shinya Uji, Taichi Terashima

Abstract: Scanning tunneling microscopy and transport measurements have been performed to investigate the electronic structure and its temperature dependence in heavily Sr and Na codoped PbTe, which is recognized as one of the most promising thermoelectric materials. Our main findings are as follows: (i) Below T=4.5 K, all carriers are distributed in the first valence band at the L point (L band), which for… ▽ More Scanning tunneling microscopy and transport measurements have been performed to investigate the electronic structure and its temperature dependence in heavily Sr and Na codoped PbTe, which is recognized as one of the most promising thermoelectric materials. Our main findings are as follows: (i) Below T=4.5 K, all carriers are distributed in the first valence band at the L point (L band), which forms tube-shaped Fermi surfaces with concave curvature. With Sr and Na do**, the dispersion of the L band changes, and the band gap increases from 200 meV to 300 meV. (ii) At T=4.5 K, the Fermi energy is located ~100 meV below the edge of the L band for the Sr/Na codoped PbTe. The second valence band at the Sigma point (Sigma band) is lower than the L band by 150 meV, which is significantly smaller than that of pristine PbTe (200 meV). The decrease in the band offset, leading to band convergence, provides a desirable condition for thermoelectric materials.(iii) With increasing temperature, the carrier distribution to the Sigma band starts at T=100 K and we estimate that about 50 percent of the total carriers are redistributed in the Sigma band at T=300 K.Our work demonstrates that scanning tunneling microscopy and angular dependent magnetoresistance measurements are particularly powerful tools to determine the electronic structure and carrier distribution. We believe that they will provide a bird's eye view of the do** strategy towards realizing high-efficiency thermoelectric materials. △ Less

Submitted 28 September, 2023; v1 submitted 5 April, 2023; originally announced April 2023.

Comments: 36+12 pages, 4+9 figures, including Supplementary Materials

Journal ref: Phys. Rev. B 108, 125119 (2023)

A Lagrange multiplier-based optimal control technique for streak attenuation in high-speed boundary layers

Authors: Omar Es-Sahli, Adrian Sescu, M. Z. A. Koshuriyan, Yuji Hattori, Makoto Hirota

Abstract: High-amplitude free stream turbulence and surface roughness elements can excite a laminar boundary layer flow sufficiently to cause streamwise oriented vortices to develop. These vortices resemble elongated streaks having alternate spanwise variations of the streamwise velocity. Downstream, the vortices `wobble' through an inviscid secondary instability mechanism and, ultimately, transition to tur… ▽ More High-amplitude free stream turbulence and surface roughness elements can excite a laminar boundary layer flow sufficiently to cause streamwise oriented vortices to develop. These vortices resemble elongated streaks having alternate spanwise variations of the streamwise velocity. Downstream, the vortices `wobble' through an inviscid secondary instability mechanism and, ultimately, transition to turbulence. We formulate an optimal control algorithm to suppress the growth rate of the streamwise vortex system. Considering a high Reynolds number asymptotic framework, we reduce the full compressible Navier-Stokes equations to the nonlinear compressible boundary region equations (NCBRE). We then implement the method of Lagrange multipliers via an appropriate transformation of the original constrained optimization problem into an unconstrained form to obtain the disturbance equations in the form of the adjoint compressible boundary region equations (ACBRE) and corresponding optimality conditions. Numerical solutions of the ACBRE approach for high-supersonic and hypersonic flows reveal a significant reduction in the kinetic energy and wall shear stress for all considered configurations. We present contour plots to demonstrate the qualitative effect of increased control iterations. Our results indicate that the primary vortex instabilities gradually flatten in the spanwise direction thanks to the ACBRE algorithm. △ Less

Submitted 24 August, 2022; originally announced August 2022.

Comments: 29 pages. arXiv admin note: text overlap with arXiv:1802.07256

MSC Class: 76N06; 76N20; 76N25

Investigation of Görtler vortices in high-speed boundary layers via an efficient numerical solution to the non-linear boundary region equations

Authors: Omar Es-Sahli, Adrian Sescu, Mohammed Afsar, Yuji Hattori

Abstract: Streamwise vortices and the associated streaks evolve in boundary layers over flat or concave surfaces due to disturbances initiated upstream or triggered by the wall surface. Following the transient growth phase, the fully-developed vortex structures become susceptible to inviscid secondary instabilities resulting in early transition to turbulence via `bursting' processes. In high-speed boundary… ▽ More Streamwise vortices and the associated streaks evolve in boundary layers over flat or concave surfaces due to disturbances initiated upstream or triggered by the wall surface. Following the transient growth phase, the fully-developed vortex structures become susceptible to inviscid secondary instabilities resulting in early transition to turbulence via `bursting' processes. In high-speed boundary layers, more complications arise due to compressibility and thermal effects, which become more significant for higher Mach numbers. In this paper, we study Görtler vortices develo** in high-speed boundary layers using the boundary region equations (BRE) formalism, which we solve using an efficient numerical algorithm. Streaks are excited using a small transpiration velocity at the wall. Our BRE-based algorithm is found to be superior to direct numerical simulation (DNS) and ad-hoc nonlinear parabolized stability equation (PSE) models. BRE solutions are less computationally costly than a full DNS and have a more rigorous theoretical foundation than PSE-based models. For example, the full development of a Görtler vortex system in high-speed boundary layers can be predicted in a matter of minutes using a single processor via the BRE approach. This substantial reduction in calculation time is one of the major achievements of this work. We show, among other things, that it allows investigation into feedback control in reasonable total computational times. We investigate the development of the Görtler vortex system via the BRE solution with feedback control parametrically at various freestream Mach numbers $M_\infty$ and spanwise separations $λ$ of the inflow disturbances. △ Less

Submitted 2 June, 2022; originally announced June 2022.

Comments: 22 pages

MSC Class: 76N06; 76D10; 76N20

Journal ref: TCFD, 36(2), 237-249 (2022)

Improving accuracy of turbulence models by neural network

Authors: Satoshi Miyazaki, Yuji Hattori

Abstract: Neural networks of simple structures are used to construct a turbulence model for large-eddy simulation (LES). Data obtained by direct numerical simulation (DNS) of homogeneous isotropic turbulence are used to train neural networks. It is shown that two methods are effective for improvement of accuracy of the model: weighting data for training and addition of the second-order derivatives of veloci… ▽ More Neural networks of simple structures are used to construct a turbulence model for large-eddy simulation (LES). Data obtained by direct numerical simulation (DNS) of homogeneous isotropic turbulence are used to train neural networks. It is shown that two methods are effective for improvement of accuracy of the model: weighting data for training and addition of the second-order derivatives of velocity to the input variables. As a result, high correlation between the exact subgrid scale stress and the prediction by the neural network is obtained for large filter width; the correlation coefficient is about 0:9 and 0:8 for filter widths 48:8ηand 97:4η, respectively, where ηis the Kolmogorov scale. The models established by neural networks are close to but not identical with the gradient models. LES with the neural network model is performed for the homogeneous isotropic turbulence and the initial-value problem of the Taylor-Green vortices. The results obtained with the neural network model are in reasonable agreement with those of the filtered DNS. However, symmetry in the latter problem is broken since the neural network model does not possess rigorous symmetry under orthogonal transformations. △ Less

Submitted 3 December, 2020; originally announced December 2020.

Comments: 23 pages, 21 figures

Development of the new multi-beam receiver and telescope control system for NASCO

Authors: Atsushi Nishimura, Akio Ohama, Kimihiro Kimura, Daichi Tsutsumi, Yudai Matsue, Rin Yamada, Mariko Sakamoto, Kenta Matsunaga, Yutaka Hasegawa, Taisei Minami, Takeru Matsumoto, Kazuki Shiotani, So Okuda, Kakeru Fujishiro, Keisuke Sakasai, Masahiro Suzuki, Shun Saeki, Kouki Satani, Kousuke Urushihara, Chiharu Kato, Takashi Kondo, Kazuki Okawa, Daiki Kurita, Tetsuta Inaba, Shohei Maruyama , et al. (37 additional authors not shown)

Abstract: We report the current status of the NASCO (NAnten2 Super CO survey as legacy) project which aims to provide all-sky CO data cube of southern hemisphere using the NANTEN2 4-m submillimeter telescope installed at the Atacama Desert through develo** a new multi-beam receiver and a new telescope control system. The receiver consists of 5 beams. The four beams, located at the four corners of a square… ▽ More We report the current status of the NASCO (NAnten2 Super CO survey as legacy) project which aims to provide all-sky CO data cube of southern hemisphere using the NANTEN2 4-m submillimeter telescope installed at the Atacama Desert through develo** a new multi-beam receiver and a new telescope control system. The receiver consists of 5 beams. The four beams, located at the four corners of a square with the beam separation of 720$''$, are installed with a 100 GHz band SIS receiver having 2-polarization sideband-separation filter. The other beam, located at the optical axis, is installed with a 200 GHz band SIS receiver having 2-polarization sideband-separation filter. The cooled component is modularized for each beam, and cooled mirrors are used. The IF bandwidths are 8 and 4 GHz for 100 and 200 GHz bands, respectively. Using XFFTS spectrometers with a bandwidth of 2 GHz, the lines of $^{12}$CO, $^{13}$CO, and C$^{18}$O of $J$=1$-$0 or $J$=2$-$1 can be observed simultaneously for each beam. The control system is reconstructed on the ROS architecture, which is an open source framework for robot control, to enable a flexible observation mode and to handle a large amount of data. The framework is commonly used and maintained in a robotic field, and thereby reliability, flexibility, expandability, and efficiency in development are improved as compared with the system previously used. The receiver and control system are installed on the NANTEN2 telescope in December 2019, and its commissioning and science verification are on-going. We are planning to start science operation in early 2021. △ Less

Submitted 1 December, 2020; v1 submitted 30 November, 2020; originally announced November 2020.

Comments: submitted to SPIE Astronomical Telescopes + Instrumentation (AS20), paper No. 11453-146

Furnace for Inelastic X-Ray Scattering from Liquids to 1600C

Authors: Alfred Q. R. Baron, Masanori Inui, Daisuke Ishikawa, Kazuhiro Matsuda, Yukio Kajihara, Yoichi Nakajima, Kazuhiko Taguchi, Yasunori Hattori

Abstract: The design and implementation of a furnace for inelastic x-ray scattering from liquids with sample temperatures up to ~1600C is described. Carbon composite heaters operating in vacuum provide robust heating elements: one pair of heaters has been used for >18 days of operational time above 1500C, including 8 cycles to room temperature. High quality data has been obtained to scattering angles as low… ▽ More The design and implementation of a furnace for inelastic x-ray scattering from liquids with sample temperatures up to ~1600C is described. Carbon composite heaters operating in vacuum provide robust heating elements: one pair of heaters has been used for >18 days of operational time above 1500C, including 8 cycles to room temperature. High quality data has been obtained to scattering angles as low as 7 mrad in two-theta (Q<1 nm-1 at 25.7 keV) from a sample at 1560C. △ Less

Submitted 30 April, 2020; originally announced April 2020.

Comments: 15 pages, 8 Figures, Proceeding of NCM 14

Thickness dependence of spin Peltier effect visualized by thermal imaging technique

Authors: Shunsuke Daimon, Ken-ichi Uchida, Naomi Ujiie, Yasuyuki Hattori, Rei Tsuboi, Eiji Saitoh

Abstract: Magnon propagation length in a ferrimagnetic insulator yttrium iron garnet (YIG) has been investigated by measuring and analyzing the YIG-thickness t_YIG dependence of the spin Peltier effect (SPE) in a Pt/YIG junction system. By means of the lock-in thermography technique, we measured the spatial distribution of the SPE-induced temperature modulation in the Pt/YIG system with the t_YIG gradation,… ▽ More Magnon propagation length in a ferrimagnetic insulator yttrium iron garnet (YIG) has been investigated by measuring and analyzing the YIG-thickness t_YIG dependence of the spin Peltier effect (SPE) in a Pt/YIG junction system. By means of the lock-in thermography technique, we measured the spatial distribution of the SPE-induced temperature modulation in the Pt/YIG system with the t_YIG gradation, allowing us to obtain the accurate t_YIG dependence of SPE with high t_YIG resolution. Based on the t_YIG dependence of SPE, we verified the applicability of several phenomenological models to estimate the magnon diffusion length in YIG. △ Less

Submitted 2 September, 2020; v1 submitted 4 June, 2019; originally announced June 2019.

Comments: 10 pages, 4 figures

Stepwise Acquisition of Dialogue Act Through Human-Robot Interaction

Authors: Akane Matsushima, Ryosuke Kanajiri, Yusuke Hattori, Chie Fukada, Natsuki Oka

Abstract: A dialogue act (DA) represents the meaning of an utterance at the illocutionary force level (Austin 1962) such as a question, a request, and a greeting. Since DAs take charge of the most fundamental part of communication, we believe that the elucidation of DA learning mechanism is important for cognitive science and artificial intelligence. The purpose of this study is to verify that scaffolding t… ▽ More A dialogue act (DA) represents the meaning of an utterance at the illocutionary force level (Austin 1962) such as a question, a request, and a greeting. Since DAs take charge of the most fundamental part of communication, we believe that the elucidation of DA learning mechanism is important for cognitive science and artificial intelligence. The purpose of this study is to verify that scaffolding takes place when a human teaches a robot, and to let a robot learn to estimate DAs and to make a response based on them step by step utilizing scaffolding provided by a human. To realize that, it is necessary for the robot to detect changes in utterance and rewards given by the partner and continue learning accordingly. Experimental results demonstrated that participants who continued interaction for a sufficiently long time often gave scaffolding for the robot. Although the number of experiments is still insufficient to obtain a definite conclusion, we observed that 1) the robot quickly learned to respond to DAs in most cases if the participants only spoke utterances that match the situation, 2) in the case of participants who builds scaffolding differently from what we assumed, learning did not proceed quickly, and 3) the robot could learn to estimate DAs almost exactly if the participants kept interaction for a sufficiently long time even if the scaffolding was unexpected. △ Less

Submitted 28 April, 2019; v1 submitted 23 October, 2018; originally announced October 2018.

Comments: Published as a conference paper at IJCNN 2019

Ultrafast Studies of Hot-Hole Dynamics in Au/p-GaN Heterostructures

Authors: Giulia Tagliabue, Joseph S. DuChene, Mohamed Abdellah, Adela Habib, Yocefu Hattori, Kaibo Zheng, Sophie E. Canton, David J. Gosztola, Wen-Hui Cheng, Ravishankar Sundararaman, Jacinto Sa, Harry A. Atwater

Abstract: Harvesting non-equilibrium hot carriers from photo-excited metal nanoparticles has enabled plasmon-driven photochemical transformations and tunable photodetection with resonant nanoantennas. Despite numerous studies on the ultrafast dynamics of hot electrons, to date, the temporal evolution of hot holes in metal-semiconductor heterostructures remains unknown. An improved understanding of the carri… ▽ More Harvesting non-equilibrium hot carriers from photo-excited metal nanoparticles has enabled plasmon-driven photochemical transformations and tunable photodetection with resonant nanoantennas. Despite numerous studies on the ultrafast dynamics of hot electrons, to date, the temporal evolution of hot holes in metal-semiconductor heterostructures remains unknown. An improved understanding of the carrier dynamics in hot-hole-driven systems is needed to help expand the scope of hot-carrier optoelectronics beyond hot-electron-based devices. Here, using ultrafast transient absorption spectroscopy, we show that plasmon-induced hot-hole injection from gold (Au) nanoparticles into the valence band of p-type gallium nitride (p-GaN) occurs within 200 fs, placing hot-hole transfer on a similar timescale as hot-electron transfer. We further observed that the removal of hot holes from below the Au Fermi level exerts a discernible influence on the thermalization of hot electrons above it, reducing the peak electronic temperature and decreasing the electron-phonon coupling time relative to Au samples without a pathway for hot-hole collection. First principles calculations corroborate these experimental observations, suggesting that hot-hole injection modifies the relaxation dynamics of hot electrons in Au nanoparticles through ultrafast modulation of the d-band electronic structure. Taken together, these ultrafast studies substantially advance our understanding of the temporal evolution of hot holes in metal-semiconductor heterostructures and suggest new strategies for manipulating and controlling the energy distributions of hot carriers on ultrafast timescales. △ Less

Submitted 9 October, 2018; originally announced October 2018.

Comments: 12 pages, 4 figures

CO observations toward the isolated mid-infrared bubble S44: External triggering of O-star formation by a cloud-cloud collision

Authors: Mikito Kohno, Kengo Tachihara, Shinji Fujita, Yusuke Hattori, Kazufumi Torii, Atsushi Nishimura, Misaki Hanaoka, Satoshi Yoshiike, Rei Enokiya, Keisuke Hasegawa, Akio Ohama, Hidetoshi Sano, Hiroaki Yamamoto, Yasuo Fukui

Abstract: We have performed a multi-wavelength study of the mid-infrared bubble S44 to investigate the origin of isolated high-mass star(s) and the star-formation process around the bubble formed by the HII region. In this paper, we report the results of new CO observations ($^{12}$CO, $^{13}$CO $J=$1-0, and $^{12}$CO $J=$3-2) toward the isolated bubble S44 using the NANTEN2, Mopra, and ASTE radio telescope… ▽ More We have performed a multi-wavelength study of the mid-infrared bubble S44 to investigate the origin of isolated high-mass star(s) and the star-formation process around the bubble formed by the HII region. In this paper, we report the results of new CO observations ($^{12}$CO, $^{13}$CO $J=$1-0, and $^{12}$CO $J=$3-2) toward the isolated bubble S44 using the NANTEN2, Mopra, and ASTE radio telescopes. We found two velocity components in the direction of the bubble, at $-84$ km s$^{-1}$ and $-79$ km s$^{-1}$. These two clouds are likely to be physically associated with the bubble,both because of the enhanced $^{12}$CO $J=$3-2/1-0 intensity ratio from a ring-like structure affected by ultraviolet radiation from embedded high-mass star(s) and from the morphological correspondence between the 8 $μ$m emission and the CO distribution. Assuming a single object, we estimate the spectral type of the embedded star inside the bubble to be O8.5-9 ($\sim 20 M_{\odot}$) from the radio-continuum free-free emission. We hypothesize that the two clouds collided with each other 3 Myr ago, triggering the formation of the isolated high-mass star in S44, as also occurred with RCW 120 and RCW 79. We argue that this scenario can explain the origin of the isolated O-star inside the bubble. △ Less

Submitted 16 October, 2018; v1 submitted 1 September, 2018; originally announced September 2018.

Comments: 21 pages, 12 figures, and 3 tables, accepted for publication in PASJ

Determination of Carrier Polarity in Fowler-Nordheim Tunneling and Evidence of Fermi Level Pinning at the Hexagonal Boron Nitride / Metal Interface

Authors: Yoshiaki Hattori, Takashi Taniguchi, Kenji Watanabe, Kosuke Nagashio

Abstract: Hexagonal boron nitride (h-BN) is an important insulating substrate for two-dimensional (2D) heterostructure devices and possesses high dielectric strength comparable to SiO2. Here, we report two clear differences in their physical properties. The first one is the occurrence of Fermi level pinning at the metal/h-BN interface, unlike that at the metal/SiO2 interface. The second one is that the carr… ▽ More Hexagonal boron nitride (h-BN) is an important insulating substrate for two-dimensional (2D) heterostructure devices and possesses high dielectric strength comparable to SiO2. Here, we report two clear differences in their physical properties. The first one is the occurrence of Fermi level pinning at the metal/h-BN interface, unlike that at the metal/SiO2 interface. The second one is that the carrier of Fowler-Nordheim (F-N) tunneling through h-BN is a hole, which is opposite to an electron in the case of SiO2. These unique characteristics are verified by I-V measurements in the graphene/h-BN/metal heterostructure device with the aid of a numerical simulation, where the barrier height of graphene can be modulated by a back gate voltage owing to its low density of states. Furthermore, from a systematic investigation using a variety of metals, it is confirmed that the hole F-N tunneling current is a general characteristic because the Fermi levels of metals are pinned in the small energy range around ~3.5 eV from the top of the conduction band of h-BN, with a pinning factor of 0.30. The accurate energy band alignment at the h-BN/metal interface provides practical knowledge for 2D heterostructure devices. △ Less

Submitted 18 July, 2018; originally announced July 2018.

Journal ref: ACS appl. mater. interfaces, 2018, 10, 11732

Impact ionization and transport properties of hexagonal boron nitride in constant-voltage measurement

Authors: Y. Hattori, T. Taniguchi, K. Watanabe, K. Nagashio

Abstract: The electrical evaluation of the crystallinity of hexagonal boron nitride (h-BN) is still limited to the measurement of dielectric breakdown strength, in spite of its importance as the substrate for 2-dimensional van der Waals heterostructure devices. In this study, physical phenomena for degradation and failure in exfoliated single-crystal h-BN films were investigated using the constant-voltage s… ▽ More The electrical evaluation of the crystallinity of hexagonal boron nitride (h-BN) is still limited to the measurement of dielectric breakdown strength, in spite of its importance as the substrate for 2-dimensional van der Waals heterostructure devices. In this study, physical phenomena for degradation and failure in exfoliated single-crystal h-BN films were investigated using the constant-voltage stress test. At low electrical fields, the current gradually reduced and saturated with time, while the current increased at electrical fields higher than ~8 MV/cm and finally resulted in the catastrophic dielectric breakdown. These transient behaviors may be due to carrier trap** to the defect sites in h-BN because trapped carriers lower or enhance the electrical fields in h-BN depending on their polarities. The key finding is the current enhancement with time at the high electrical field, suggesting the accumulation of electrons generated by the impact ionization process. Therefore, a theoretical model including the electron generation rate by impact ionization process was developed. The experimental data support the expected degradation mechanism of h-BN. Moreover, the impact ionization coefficient was successfully extracted, which is comparable to that of SiO2, even though the fundamental band gap for h-BN is smaller than that for SiO2. Therefore, the dominant impact ionization in h-BN could be band-to-band excitation, not defect-assisted impact ionization. △ Less

Submitted 26 January, 2018; originally announced January 2018.

Journal ref: Phys. Rev. B, 2018, 97, 045425

Discovery of molecular and atomic clouds associated with the gamma-ray supernova remnant Kesteven 79

Authors: M. Kuriki, H. Sano, N. Kuno, M. Seta, Y. Yamane, T. Inaba, T. Nagaya, S. Yoshiike, K. Okawa, D. Tsutsumi, Y. Hattori, M. Kohno, S. Fujita, A. Nishimura, A. Ohama, M. Matsuo, Y. Tsuda, K. Torii, T. Minamidani, T. Umemoto, G. Rowell, A. Bamba, K. Tachihara, Y. Fukui

Abstract: We carried out $^{12}$CO($J$ = 1-0) observations of the Galactic gamma-ray supernova remnant (SNR) Kesteven 79 using the Nobeyama Radio Observatory 45 m radio telescope, which has an angular resolution of $\sim20$ arcsec. We identified molecular and atomic gas interacting with Kesteven 79 whose radial velocity is $\sim80$ km s$^{-1}$. The interacting molecular and atomic gases show good spatial co… ▽ More We carried out $^{12}$CO($J$ = 1-0) observations of the Galactic gamma-ray supernova remnant (SNR) Kesteven 79 using the Nobeyama Radio Observatory 45 m radio telescope, which has an angular resolution of $\sim20$ arcsec. We identified molecular and atomic gas interacting with Kesteven 79 whose radial velocity is $\sim80$ km s$^{-1}$. The interacting molecular and atomic gases show good spatial correspondence with the X-ray and radio shells, which have an expanding motion with an expanding velocity of $\sim4$ km s$^{-1}$. The molecular gas associated with the radio and X-ray peaks also exhibits a high-intensity ratio of CO 3-2/1-0 $>$ 0.8, suggesting a kinematic temperature of $\sim24$ K, owing to heating by the supernova shock. We determined the kinematic distance to the SNR to be $\sim5.5$ kpc and the radius of the SNR to be $\sim8$ pc. The average interstellar proton density inside of the SNR is $\sim360$ cm$^{-3}$, of which atomic protons comprise only $\sim10$ $\%$. Assuming a hadronic origin for the gamma-ray emission, the total cosmic-ray proton energy above 1 GeV is estimated to be $\sim5 \times 10^{48}$ erg. △ Less

Submitted 8 August, 2018; v1 submitted 22 November, 2017; originally announced November 2017.

Comments: 12 pages, 6 figures, 2 tables, accepted for publication in The Astrophysical Journal (ApJ)

Detailed CO ($J$ = 1--0, 2--1 and 3--2) observations toward an H{\sc ii} region RCW~32 in the Vela Molecular Ridge

Authors: Rei Enokiya, Hidetoshi Sano, Katsuhiro Hayashi, Kengo Tachihara, Kazufumi Torii, Hiroaki Yamamoto, Yusuke Hattori, Yutaka Hasegawa, Akio Ohama, Kimihiro Kimura, Hideo Ogawa, Yasuo Fukui

Abstract: We made CO ($J$ = 1--0, 2--1, and 3--2) observations toward an H{\sc ii} region RCW~32 in the Vela Molecular Ridge. The CO gas distribution associated with the H{\sc ii} region was revealed for the first time at a high resolution of 22 arcsec. The results revealed three distinct velocity components which show correspondence with the optical dark lanes and/or H$α$ distribution. Two of the component… ▽ More We made CO ($J$ = 1--0, 2--1, and 3--2) observations toward an H{\sc ii} region RCW~32 in the Vela Molecular Ridge. The CO gas distribution associated with the H{\sc ii} region was revealed for the first time at a high resolution of 22 arcsec. The results revealed three distinct velocity components which show correspondence with the optical dark lanes and/or H$α$ distribution. Two of the components show complementary spatial distribution which suggests collisional interaction between them at a relative velocity of $\sim$4 km~s$^{-1}$. Based on these results, we present a hypothesis that cloud-cloud collision determined the cloud distribution and triggered formation of the exciting star ionizing RCW~32. The collision time scale is estimated from the cloud size and the velocity separation to be $\sim$2 Myrs and the collision terminated $\sim$1 Myr ago, which is consistent with an age of the exciting star and the associated cluster. By combing the previous works on the H{\sc ii} regions in the Vela Molecular Ridge, we argue that the majority, at least four, of the H{\sc ii} regions in the Ridge were formed by triggering of cloud-cloud collision. △ Less

Submitted 23 January, 2018; v1 submitted 2 November, 2017; originally announced November 2017.

Comments: 22 pages, 8 figures

Large-scale CO J=1-0 observations of the giant molecular cloud associated with the infrared ring N35 with the Nobeyama 45-m telescope

Authors: Kazufumi Torii, Shinji Fujita, Mitsuhiro Matsuo, Atsushi Nishimura, Mikito Kohno, Mika Kuriki, Yuya Tsuda, Tetsuhiro Minamidani, Tomofumi Umemoto, Nario Kuno, Yusuke Hattori, Satoshi Yoshiike, Akio Ohama, Kengo Tachihara, Kazuhiro Shima, Asao Habe, Yasuo Fukui

Abstract: We report an observational study of the giant molecular cloud (GMC) associated with the Galactic infrared ring-like structure N35 and two nearby HII regions G024.392+00.072 (HII region A) and G024.510-00.060 (HII region B), using the new CO J=1-0 data obtained as a part of the FOREST Unbiased Galactic Plane Imaging survey with the Nobeyama 45-m telescope (FUGIN) project at a spatial resolution of… ▽ More We report an observational study of the giant molecular cloud (GMC) associated with the Galactic infrared ring-like structure N35 and two nearby HII regions G024.392+00.072 (HII region A) and G024.510-00.060 (HII region B), using the new CO J=1-0 data obtained as a part of the FOREST Unbiased Galactic Plane Imaging survey with the Nobeyama 45-m telescope (FUGIN) project at a spatial resolution of 21". Our CO data revealed that the GMC, with a total molecular mass of 2.1x10^6Mo, has two velocity components over ~10-15km/s. The majority of molecular gas in the GMC is included in the lower-velocity component (LVC) at ~110-114km/s, while the higher-velocity components (HVCs) at ~118-126km/s consist of three smaller molecular clouds which are located near the three HII regions. The LVC and HVCs show spatially complementary distributions along the line-of-sight, despite large velocity separations of ~5-15km/s, and are connected in velocity by the CO emission with intermediate intensities. By comparing the observations with simulations, we discuss a scenario where collisions of the three HVCs with LVC at velocities of ~10-15km/s can provide an interpretation of these two observational signatures. The intermediate velocity features between the LVC and HVCs can be understood as broad bridge features, which indicate the turbulent motion of the gas at the collision interfaces, while the spatially complementary distributions represent the cavities created in the LVC by the HVCs through the collisions. Our model indicates that the three HII regions were formed after the onset of the collisions, and it is therefore suggested that the high-mass star formation in the GMC was triggered by the collisions. △ Less

Submitted 30 May, 2018; v1 submitted 23 October, 2017; originally announced October 2017.

Comments: 30 pages, 15 figures, accepted for publication in PASJ

The formation of a Spitzer bubble RCW79 triggered by cloud-cloud collision

Authors: Akio Ohama, Mikito Kohno, Keisuke Hasegawa, Kazufumi Torii, Atsushi Nishimura, Yusuke Hattori, Takahiro Hayakawa, Tsuyoshi Inoue, Hidetoshi Sano, Hiroaki Yamamoto, Kengo Tachihara, Yasuo Fukui

Abstract: Understanding the mechanism of O star formation is one of the most important issues in current astrophysics. It is also an issue of keen interest how O stars affect their surroundings and trigger secondary star formation. An H\,\emissiontype{II} region RCW79 is one of the typical Spitzer bubbles alongside of RCW120. New observations of CO $J=$ 1--0 emission with Mopra and NANTEN2 revealed that mol… ▽ More Understanding the mechanism of O star formation is one of the most important issues in current astrophysics. It is also an issue of keen interest how O stars affect their surroundings and trigger secondary star formation. An H\,\emissiontype{II} region RCW79 is one of the typical Spitzer bubbles alongside of RCW120. New observations of CO $J=$ 1--0 emission with Mopra and NANTEN2 revealed that molecular clouds are associated with RCW79 in four velocity components over a velocity range of 20 km s$^{-1}$. We hypothesize that two of the clouds collided with each other and the collision triggered the formation of 12 O stars inside of the bubble and the formation of 54 low mass young stellar objects along the bubble wall. The collision is supported by observational signatures of bridges connecting different velocity components in the colliding clouds. The whole collision process happened in a timescale of $\sim$1 Myr. RCW79 has a larger size by a factor of 30 in the projected area than RCW120 with a single O star, and the large size favored formation of the 12 O stars due to the larger accumulated gas in the collisional shock compression. △ Less

Submitted 15 February, 2018; v1 submitted 7 September, 2017; originally announced September 2017.

Comments: 21 pages, 8 figures

Molecular and Atomic Clouds toward the Wolf-Rayet Nebula NGC 2359: Possible Evidence for Isolated High-Mass Star Formation Triggered by a Cloud-Cloud Collision

Authors: Hidetoshi Sano, Katsuhiro Hayashi, Rei Enokiya, Kazufumi Torii, Shun Saeki, Kazuki Okawa, Kisetsu Tsuge, Daichi Tsutsumi, Mikito Kohno, Yusuke Hattori, Shinji Fujita, Satoshi Yoshiike, Ryuji Okamoto, Atsushi Nishimura, Akio Ohama, Takahiro Hayakawa, Hiroaki Yamamoto, Kengo Tachihara, Cristina Elisabet Cappa, Yasuo Fukui

Abstract: NGC 2359 is an HII region located in the outer Galaxy that contains the isolated Wolf-Rayet (WR) star HD 56925. We present millimeter/submillimeter observations of $^{12}$CO($J$ = 1-0, 3-2) line emission toward the entire nebula. We identified that there are three molecular clouds at VLSR $\sim$37, $\sim$54, and $\sim$67 km s$^{-1}$, and three HI clouds: two of them are at VLSR $\sim$54 km s… ▽ More NGC 2359 is an HII region located in the outer Galaxy that contains the isolated Wolf-Rayet (WR) star HD 56925. We present millimeter/submillimeter observations of $^{12}$CO($J$ = 1-0, 3-2) line emission toward the entire nebula. We identified that there are three molecular clouds at VLSR $\sim$37, $\sim$54, and $\sim$67 km s$^{-1}$, and three HI clouds: two of them are at VLSR $\sim$54 km s$^{-1}$ and the other is at $\sim$63 km s$^{-1}$. These clouds except for the CO cloud at 67 km s$^{-1}$ are limb-brightened in the radio continuum, suggesting part of each cloud has been ionized. We newly found an expanding gas motion of CO/HI, whose center and expansion velocities are $\sim$51 and $\sim$4.5 km s$^{-1}$, respectively. This is consistent with large line widths of the CO and HI clouds at 54 km s$^{-1}$. The kinematic temperature of CO clouds at 37 and 54 km s$^{-1}$ are derived to be 17 and 61 K, respectively, whereas that of the CO cloud at 67 km s$^{-1}$ is only 6 K, indicating that the former two clouds have been heated by strong UV radiation. We concluded that the 37 and 54 km s$^{-1}$ CO clouds and three HI clouds are associated with NGC 2359, even if these clouds have different velocities. Although the velocity difference including the expanding motion are typical signatures of the stellar feedback from the exciting star, our analysis revealed that the observed large momentum for the 37 km s$^{-1}$ CO cloud cannot be explained only by the total wind momentum of the WR star and its progenitor. We therefore propose an alternative scenario that the isolated high-mass progenitor of HD 56925 was formed by a collision between the CO clouds at 37 and 54 km s$^{-1}$. If we apply the collision scenario, NGC 2359 corresponds to the final phase of the cloud-cloud collision. △ Less

Submitted 17 March, 2020; v1 submitted 27 August, 2017; originally announced August 2017.

Comments: 38 pages, 13 figures, 1 table, submitted to Publications of the Astronomical Society of Japan (PASJ)

FOREST Unbiased Galactic plane Imaging survey with the Nobeyama 45-m telescope (FUGIN) I: Project Overview and Initial Results

Authors: Tomofumi Umemoto, Tetsuhiro Minamidani, Nario Kuno, Shinji Fujita, Mitsuhiro Matsuo, Atsushi Nishimura, Kazufumi Torii, Tomoka Tosaki, Mikito Kohno, Mika Kuriki, Yuya Tsuda, Akihiko Hirota, Satoshi Ohashi, Mitsuyoshi Yamagishi, Toshihiro Handa, Hiroyuki Nakanishi, Toshihiro Omodaka, Nagito Koide, Naoko Matsumoto, Toshikazu Onishi, Kazuki Tokuda, Masumichi Seta, Yukinori Kobayashi, Kengo Tachihara, Hidetoshi Sano , et al. (19 additional authors not shown)

Abstract: The FOREST Unbiased Galactic plane Imaging survey with the Nobeyama 45-m telescope (FUGIN) project is one of the legacy projects using the new multi-beam FOREST receiver installed on the Nobeyama 45-m telescope. This project aims to investigate the distribution, kinematics, and physical properties of both diffuse and dense molecular gas in the Galaxy at once by observing 12CO, 13CO, and C18O J=1-0… ▽ More The FOREST Unbiased Galactic plane Imaging survey with the Nobeyama 45-m telescope (FUGIN) project is one of the legacy projects using the new multi-beam FOREST receiver installed on the Nobeyama 45-m telescope. This project aims to investigate the distribution, kinematics, and physical properties of both diffuse and dense molecular gas in the Galaxy at once by observing 12CO, 13CO, and C18O J=1-0 lines simultaneously. The map** regions are a part of the 1st quadrant (10d < l < 50d, |b| < 1d) and the 3rd quadrant (198d < l <236d, |b| < 1d) of the Galaxy, where spiral arms, bar structure, and the molecular gas ring are included. This survey achieves the highest angular resolution to date (~20") for the Galactic plane survey in the CO J=1-0 lines, which makes it possible to find dense clumps located farther away than the previous surveys. FUGIN will provide us with an invaluable dataset for investigating the physics of the galactic interstellar medium (ISM), particularly the evolution of interstellar gas covering galactic scale structures to the internal structures of giant molecular clouds, such as small filament/clump/core. We present an overview of the FUGIN project, observation plan, and initial results, which reveal wide-field and detailed structures of molecular clouds, such as entangled filaments that have not been obvious in previous surveys, and large-scale kinematics of molecular gas such as spiral arms. △ Less

Submitted 19 July, 2017; originally announced July 2017.

Comments: 19 pages, 14 figures, accepted for publication in PASJ

Molecular clouds toward three Spitzer bubbles S116, S117 and S118: Evidence for the cloud-cloud collision which formed the three \HII \ regions and a 10-pc scale molecular cavity

Authors: Yasuo Fukui, Akio Ohama, Mikito Kohno, Kazufumi Torii, Shiji Fujita, Yusuke Hattori, Atsushi Nishimura, Hiroaki Yamamoto, Kengo Tachihara

Abstract: We carried out a molecular line study toward the three Spitzer bubbles S116, S117 and S118 which show active formation of high-mass stars. We found molecular gas consisting of two components with velocity difference of {$\sim 5$ \kms}. One of them, the small cloud, has typical velocity of {$-63$ \kms} \ and the other, the large cloud, has that of $-58$ \kms. The large cloud has a nearly circular i… ▽ More We carried out a molecular line study toward the three Spitzer bubbles S116, S117 and S118 which show active formation of high-mass stars. We found molecular gas consisting of two components with velocity difference of {$\sim 5$ \kms}. One of them, the small cloud, has typical velocity of {$-63$ \kms} \ and the other, the large cloud, has that of $-58$ \kms. The large cloud has a nearly circular intensity depression whose size is similar to the small cloud. We present an interpretation that the cavity was created by a collision between the two clouds and the collision compressed the gas into a dense layer elongated along the western rim of the small cloud. In this scenario, the O stars including those in the three Spitzer bubbles were formed in the interface layer compressed by the collision. By assuming that the relative motion of the clouds has a tilt of \timeform{45D} to the line of sight, we estimate that the collision continued over the last 1 Myr at relative velocity of $\sim$10 \kms. In the S116--117--118 system the \HII \ regions are located outside of the cavity. This morphology is ascribed to the density-bound distribution of the large cloud which made the \HII \ regions more easily expand toward the outer part of the large cloud than inside of the cavity. The present case proves that a cloud-cloud collision creates a cavity without an action of O star feedback, and suggests that the collision-compressed layer is highly filamentary. △ Less

Submitted 15 February, 2018; v1 submitted 27 June, 2017; originally announced June 2017.

Comments: 23 pages, 10 figures

FOREST Unbiased Galactic plane Imaging survey with the Nobeyama 45-m telescope (FUGIN) : Molecular clouds toward W33 ; possible evidence for a cloud-cloud collision triggering O star formation

Authors: Mikito Kohno, Kazufumi Torii, Kengo Tachihara, Tomofumi Umemoto, Tetsuhiro Minamidani, Atsushi Nishimura, Shinji Fujita, Mitsuhiro Matsuo, Mitsuyoshi Yamagishi, Yuya Tsuda, Mika Kuriki, Nario Kuno, Akio Ohama, Yusuke Hattori, Hidetoshi Sano, Hiroaki Yamamoto, Yasuo Fukui

Abstract: We observed molecular clouds in the W33 high-mass star-forming region associated with compact and extended HII regions using the NANTEN2 telescope as well as the Nobeyama 45-m telescope in the $J=$1-0 transitions of $^{12}$CO, $^{13}$CO, and C$^{18}$O as a part of the FOREST Unbiased Galactic plane Imaging survey with the Nobeyama 45-m telescope (FUGIN) legacy survey. We detected three velocity co… ▽ More We observed molecular clouds in the W33 high-mass star-forming region associated with compact and extended HII regions using the NANTEN2 telescope as well as the Nobeyama 45-m telescope in the $J=$1-0 transitions of $^{12}$CO, $^{13}$CO, and C$^{18}$O as a part of the FOREST Unbiased Galactic plane Imaging survey with the Nobeyama 45-m telescope (FUGIN) legacy survey. We detected three velocity components at 35 km s$^{-1}$, 45 km s$^{-1}$, and 58 km s$^{-1}$. The 35 km s$^{-1}$ and 58 km s$^{-1}$ clouds are likely to be physically associated with W33 because of the enhanced $^{12}$CO $J=$ 3-2 to $J=$1-0 intensity ratio as $R_{\rm 3-2/1-0} > 1.0$ due to the ultraviolet irradiation by OB stars, and morphological correspondence between the distributions of molecular gas and the infrared and radio continuum emissions excited by high-mass stars. The two clouds show complementary distributions around W33. The velocity separation is too large to be gravitationally bound, and yet not explained by expanding motion by stellar feedback. Therefore, we discuss that a cloud-cloud collision scenario likely explains the high-mass star formation in W33. △ Less

Submitted 24 October, 2017; v1 submitted 24 June, 2017; originally announced June 2017.

Comments: 29 pages, 18 figures, 3 tables, accepted for publication in PASJ

CO observations of the molecular gas in the galactic HII region Sh2-48; Evidence for cloud-cloud collision as a trigger of high-mass star formation

Authors: Kazufumi Torii, Yusuke Hattori, Mitsuhiro Matsuo, Shinji Fujita, Atsushi Nishimura, Mikito Kohno, Mika Kuriki, Yuya Tsuda, Tetsuhiro Minamidani, Tomofumi Umemoto, Nario Kuno, Satoshi Yoshiike, Akio Ohama, Kengo Tachihara, Yasuo Fukui, Kazuhiro Shima, Asao Habe, Thomas J. Haworth

Abstract: Sh2-48 is a Galactic HII region located at 3.8 kpc with an O9.5-type star identified at its center. As a part of the FOREST Unbiased Galactic plane Imaging survey using the Nobeyama 45-m telescope (FUGIN) project, we obtained the CO J=1-0 dataset for a large area of Sh2-48 at a spatial resolution of 21"(~0.4 pc), which we used to find a molecular cloud with a total molecular mass of ~3.8x10^4 Mo a… ▽ More Sh2-48 is a Galactic HII region located at 3.8 kpc with an O9.5-type star identified at its center. As a part of the FOREST Unbiased Galactic plane Imaging survey using the Nobeyama 45-m telescope (FUGIN) project, we obtained the CO J=1-0 dataset for a large area of Sh2-48 at a spatial resolution of 21"(~0.4 pc), which we used to find a molecular cloud with a total molecular mass of ~3.8x10^4 Mo associated with Sh2-48. The molecular cloud has a systematic velocity shift within a velocity range ~42-47 km/s . On the lower velocity side the CO emission spatially corresponds with the bright 8 μm filament at the western rim of Sh2-48, while the CO emission at higher velocities is separated at the eastern and western sides of the 8μm filament. This velocity change forms V-shaped, east-west-oriented feature on the position-velocity diagram. We found that these lower and higher-velocity components are, unlike the infrared and radio continuum data, physically associated with Sh2-48. To interpret the observed V-shaped velocity distribution, we assessed a cloud-cloud collision scenario and found from a comparison between the observations and simulations that the velocity distribution is an expected outcome of a collision between a cylindrical cloud and a spherical cloud, with the cylindrical cloud corresponding to the lower-velocity component, and the two separated components in the higher-velocity part interpretable as the collision-broken remnants of the spherical cloud. Based on the consistency of the ~1.3Myr estimated formation timescale of the HII region with that of the collision, we concluded that the high-mass star formation in Sh2-48 was triggered by the collision. △ Less

Submitted 31 July, 2018; v1 submitted 22 June, 2017; originally announced June 2017.

Comments: 26 pages, 18 figures, Accepted for publications in the PASJ

FOREST Unbiased Galactic plane Imaging survey with the Nobeyama 45-m telescope (FUGIN) 2: Possible evidence for formation of NGC~6618 cluster in M17 by cloud-cloud collision

Authors: Atsushi Nishimura, Tetsuhiro Minamidani, Tomofumi Umemoto, Shinji Fujita, Mitsuhiro Matsuo, Yusuke Hattori, Mikito Kohno, Mitsuyoshi Yamagishi, Yuya Tsuda, Mika Kuriki, Nario Kuno, Kazufumi Torii, Daichi Tsutumi, Kazuki Okawa, Hidetoshi Sano, Kengo Tachihara, Akio Ohama, Yasuo Fukui

Abstract: We present $^{12}$CO $J=$1--0, $^{13}$CO $J=$1--0 and C$^{18}$O $J=$1--0 images of the M17 giant molecular clouds obtained as part of FUGIN (FOREST Ultra-wide Galactic Plane Survey InNobeyama) project. The observations cover the entire area of M17 SW and M17 N clouds at the highest angular resolution ($\sim$19$"$) to date which corresponds to $\sim$ 0.15 pc at the distance of 2.0 kpc. We find that… ▽ More We present $^{12}$CO $J=$1--0, $^{13}$CO $J=$1--0 and C$^{18}$O $J=$1--0 images of the M17 giant molecular clouds obtained as part of FUGIN (FOREST Ultra-wide Galactic Plane Survey InNobeyama) project. The observations cover the entire area of M17 SW and M17 N clouds at the highest angular resolution ($\sim$19$"$) to date which corresponds to $\sim$ 0.15 pc at the distance of 2.0 kpc. We find that the region consists of four different velocity components: very low velocity (VLV) clump, low velocity component (LVC), main velocity component (MVC), and high velocity component (HVC). The LVC and the HVC have cavities. UV photons radiated from NGC 6618 cluster penetrate into the N cloud up to $\sim$ 5 pc through the cavities and interact with molecular gas. This interaction is correlated with the distribution of YSOs in the N cloud. The LVC and the HVC are distributed complementary after that the HVC is displaced by 0.8 pc toward the east-southeast direction, suggesting that collision of the LVC and the HVC create the cavities in both clouds. The collision velocity and timescale are estimated to be 9.9 km s$^{-1}$ and $1.1 \times 10^{5}$ yr, respectively. The high collision velocity can provide the mass accretion rate up to 10$^{-3}$ $M_{\solar}$ yr$^{-1}$, and the high column density ($4 \times 10^{23}$ cm$^{-2}$) might result in massive cluster formation. The scenario of cloud-cloud collision likely well explains the stellar population and its formation history of NGC 6618 cluster proposed by Hoffmeister et al. (2008). △ Less

Submitted 21 June, 2017; originally announced June 2017.

Comments: 24 pages, 13 figures, submitted to PASJ

A new view of the giant molecular cloud M16 (Eagle Nebula) in 12CO J=1-0 and 2-1 transitions with NANTEN2

Authors: Atsushi Nishimura, Jean Costes, Tetsuta Inaba, Kengo Tachihara, Yusuke Hattori, Mikito Kohno, Akio Ohama, Kazufumi Torii, Hidetoshi Sano, Hiroaki Yamamoto, Yutaka Hasegawa, Kimihiro Kimura, Hideo Ogawa, Yasuo Fukui

Abstract: M16, the Eagle Nebula, is an outstanding HII region where extensive high-mass star formation is taking place in the Sagittarius Arm, and hosts the remarkable "pillars" observed with HST. We made new CO observations of the region in the 12CO J=1--0 and J=2--1 transitions with NANTEN2. These observations revealed for the first time that a giant molecular cloud of $\sim 1.3 \times 10^5$ \Msun \ is as… ▽ More M16, the Eagle Nebula, is an outstanding HII region where extensive high-mass star formation is taking place in the Sagittarius Arm, and hosts the remarkable "pillars" observed with HST. We made new CO observations of the region in the 12CO J=1--0 and J=2--1 transitions with NANTEN2. These observations revealed for the first time that a giant molecular cloud of $\sim 1.3 \times 10^5$ \Msun \ is associated with M16, which is elongated vertically to the Galactic plane over 35 pc at a distance of 1.8 kpc. We found a cavity of the molecular gas of $\sim 10$ pc diameter toward the heart of M16 at \lbeq (16.95\degree, 0.85\degree), where more than 10 O-type stars and $\sim 400$ stars are associated, in addition to a close-by molecular cavity toward a Spitzer bubble N19 at \lbeq (17.06\degree, 1.0\degree). We found three velocity components which show spatially complementary distribution in the entire M16 giant molecular cloud (GMC) including NGC6611 and N19, suggesting collisional interaction between them. Based on the above results we frame a hypothesis that collision between the red-shifted and blue-shifted components at a relative of $\sim 10$ \kms \ triggered formation of the O-type stars in the M16 GMC in the last 1-2 Myr. The collision is two fold in the sense that one of the collisional interactions is major toward the M16 cluster and the other toward N19 with a RCW120 type, the former triggered most of the O star formation with almost full ionization of the parent gas, and the latter an O star formation in N19. △ Less

Submitted 19 June, 2017; originally announced June 2017.

Comments: 20 pages, 10 figures, submitted to PASJ

High-mass star formation possibly triggered by cloud-cloud collision in the HII region RCW 34

Authors: Katsuhiro Hayashi, Hidetoshi Sano, Rei Enokiya, Kazufumi Torii, Yusuke Hattori, Mikito Kohno, Shinji Fujita, Atsushi Nishimura, Akio Ohama, Hiroaki Yamamoto, Kengo Tachihara, Yutaka Hasegawa, Kimihiro Kimura, Hideo Ogawa, Yasuo Fukui

Abstract: We report a possibility that the high-mass star located in the HII region RCW 34 was formed by a triggering induced by a collision of molecular clouds. Molecular gas distributions of the $^{12}$CO and $^{13}$CO $J=$2-1, and $^{12}$CO $J=$3-2 lines toward RCW 34 were measured by using the NANTEN2 and ASTE telescopes. We found two clouds with the velocity ranges of 0-10 km s$^{-1}$ and 10-14 km s… ▽ More We report a possibility that the high-mass star located in the HII region RCW 34 was formed by a triggering induced by a collision of molecular clouds. Molecular gas distributions of the $^{12}$CO and $^{13}$CO $J=$2-1, and $^{12}$CO $J=$3-2 lines toward RCW 34 were measured by using the NANTEN2 and ASTE telescopes. We found two clouds with the velocity ranges of 0-10 km s$^{-1}$ and 10-14 km s$^{-1}$. Whereas the former cloud as massive as ~2.7 x 10$^{4}$ Msun has a morphology similar to the ring-like structure observed in the infrared wavelengths, the latter cloud with the mass of ~10$^{3}$ Msun, which has not been recognized by previous observations, distributes just likely to cover the bubble enclosed by the other cloud. The high-mass star with the spectral types of O8.5V is located near the boundary of the two clouds. The line intensity ratio of $^{12}$CO $J=$3-2 / $J=$2-1 yields high values (~1.5) in the neighborhood of the high-mass star, suggesting that these clouds are associated with the massive star. We also confirmed that the obtained position-velocity diagram shows a similar distribution with that derived by a numerical simulation of the supersonic collision of two clouds. Using the relative velocity between the two clouds (~5 km s$^{-1}$), the collisional time scale is estimated to be $\sim$0.2 Myr with the assumption of the distance of 2.5 kpc. These results suggest that the high-mass star in RCW 34 was formed rapidly within a time scale of ~0.2 Myr via a triggering of cloud-cloud collision. △ Less

Submitted 10 November, 2017; v1 submitted 19 June, 2017; originally announced June 2017.

Comments: 18 pages, 10 figures, 2 tables, accepted for Publications of the Astronomical Society of Japan (PASJ)

Molecular clouds in the NGC 6334 and NGC 6357 region; Evidence for a 100 pc-scale cloud-cloud collision triggering the Galactic mini-starbursts

Authors: Yasuo Fukui, Mikito Kohno, Keiko Yokoyama, Kazufumi Torii, Yusuke Hattori, Hidetoshi Sano, Atsushi Nishimura, Akio Ohama, Hiroaki Yamamoto, Kengo Tachihara

Abstract: We carried out new CO ($J=$1-0, 2-1 and 3-2) observations with NANTEN2 and ASTE in the region of the twin Galactic mini-starbursts NGC 6334 and NGC 6357. We detected two velocity molecular components of 12 km s$^{-1}$ velocity separation, which is continuous over 3 degrees along the plane. In NGC 6334 the two components show similar two-peaked intensity distributions toward the young HII regions a… ▽ More We carried out new CO ($J=$1-0, 2-1 and 3-2) observations with NANTEN2 and ASTE in the region of the twin Galactic mini-starbursts NGC 6334 and NGC 6357. We detected two velocity molecular components of 12 km s$^{-1}$ velocity separation, which is continuous over 3 degrees along the plane. In NGC 6334 the two components show similar two-peaked intensity distributions toward the young HII regions and are linked by a bridge feature. In NGC 6357 we found spatially complementary distribution between the two velocity components as well as a bridge feature in velocity. Based on these results we hypothesize that the two clouds in the two regions collided with each other in the past few Myr and triggered formation of the starbursts over $\sim$ 100 pc. We suggest that the formation of the starbursts happened toward the collisional region of $\sim$ 10-pc extents with initial high molecular column densities. For NGC 6334 we present a scenario which includes spatial variation of the colliding epoch due to non-uniform cloud separation. The scenario possibly explains the apparent age difference among the young O stars in NGC 6334 raging from $10^4$ yrs to $10^6$ yrs; the latest collision happened within $10^5$ yrs toward the youngest stars in NGC 6334 I(N) and I which exhibit molecular outflows without HII regions. For NGC 6357 the O stars were formed a few Myrs ago, and the cloud dispersal by the O stars is significant. We conclude that cloud-cloud collision offers a possible explanation of the min-starburst over a 100-pc scale. △ Less

Submitted 25 January, 2018; v1 submitted 18 June, 2017; originally announced June 2017.

Comments: 24 pages, 14 figures, 2 tables, accepted for publication in PASJ

RCW 36 in the Vela Molecular Ridge: Evidence for a high-mass star cluster formation triggered by Cloud-Cloud Collision

Authors: Hidetoshi Sano, Rei Enokiya, Katsuhiro Hayashi, Mitsuyoshi Yamagishi, Shun Saeki, Kazuki Okawa, Kisetsu Tsuge, Daichi Tsutsumi, Mikito Kohno, Yusuke Hattori, Satoshi Yoshiike, Shinji Fujita, Atsushi Nishimura, Akio Ohama, Kengo Tachihara, Kazufumi Torii, Yutaka Hasegawa, Kimihiro Kimura, Hideo Ogawa, Graeme F. Wong, Catherine Braiding, Gavin Rowell, Michael G. Burton, Yasuo Fukui

Abstract: A collision between two molecular clouds is one possible candidate for high-mass star formation. The HII region RCW 36, located in the Vela molecular ridge, contains a young star cluster with two O-type stars. We present new CO observations of RCW 36 with NANTEN2, Mopra, and ASTE using $^{12}$CO($J$ = 1-0, 2-1, 3-2) and $^{13}$CO($J$ = 2-1) line emissions. We have discovered two molecular clouds l… ▽ More A collision between two molecular clouds is one possible candidate for high-mass star formation. The HII region RCW 36, located in the Vela molecular ridge, contains a young star cluster with two O-type stars. We present new CO observations of RCW 36 with NANTEN2, Mopra, and ASTE using $^{12}$CO($J$ = 1-0, 2-1, 3-2) and $^{13}$CO($J$ = 2-1) line emissions. We have discovered two molecular clouds lying at the velocities $V_\mathrm{LSR} \sim$5.5 and 9 km s$^{-1}$. Both clouds are likely to be physically associated with the star cluster, as verified by the good spatial correspondence among the two clouds, infrared filaments, and the star cluster. We also found a high intensity ratio of $\sim$0.6-1.2 for CO $J$ = 3-2 / 1-0 toward both clouds, indicating that the gas temperature has been increased due to heating by the O-type stars. We propose that the O-type stars in RCW 36 were formed by a collision between the two clouds, with a relative velocity separation of 5 km s$^{-1}$. The complementary spatial distributions and the velocity separation of the two clouds are in good agreement with observational signatures expected for O-type star formation triggered by a cloud-cloud collision. We also found a displacement between the complementary spatial distributions of the two clouds, which we estimate to be 0.3 pc assuming the collision angle to be 45$^{\circ}$ relative to the line-of-sight. We estimate the collision timescale to be $\sim$10$^5$ yr. It is probable that the cluster age by Ellerbroek et al. (2013b) is dominated by the low-mass members which were not formed under the triggering by cloud-cloud collision, and that the O-type stars in the center of the cluster are explained by the collisional triggering independently from the low-mass star formation. △ Less

Submitted 2 February, 2018; v1 submitted 18 June, 2017; originally announced June 2017.

Comments: 13 pages, 9 figures, and 2 tables, accepted for publication in PASJ

High-mass star formation in Orion possibly triggered by cloud-cloud collision III, NGC2068 and NGC2071

Authors: Shinji Fujita, Daichi Tsutsumi, Akio Ohama, Asao Habe, Nirmit Sakre, Kazuki Okawa, Mikito Kohno, Yusuke Hattori, Atsushi Nishimura, Kazufumi Torii, Hidetoshi Sano, Kengo Tachihara, Kimihiro Kimura, Hideo Ogawa, Yasuo Fukui

Abstract: Using the NANTEN2 Observatory, we carried out a molecular line study of high-mass star forming regions with reflection nebulae, NGC 2068 and NGC 2071, in Orion in the 13CO(J=2-1) transition. The 13CO distribution shows that there are two velocity components at 9.0 and 10.5 km/s . The blue-shifted component is in the northeast associated with NGC 2071, whereas the red-shifted component is in the so… ▽ More Using the NANTEN2 Observatory, we carried out a molecular line study of high-mass star forming regions with reflection nebulae, NGC 2068 and NGC 2071, in Orion in the 13CO(J=2-1) transition. The 13CO distribution shows that there are two velocity components at 9.0 and 10.5 km/s . The blue-shifted component is in the northeast associated with NGC 2071, whereas the red-shifted component is in the southwest associated with NGC 2068. The total intensity distribution of the two clouds shows a gap of ~1 pc, suggesting that they are detached at present. A detailed spatial comparison indicates that the two show complementary distributions. The blue-shifted component lies toward an intensity depression to the northwest of the red-shifted component, where we find that a displacement of 0.8 pc makes the two clouds fit well with each other. Furthermore, a new simulation of non-frontal collisions shows that observations from 60 degrees off the collisional axis agreed well with the velocity structure in this region. On the basis of these results, we hypothesize that the two components collided with each other at a projected relative velocity 3.0 km/s estimated to be 0.3 Myr for an assumed axis of the relative motion 60 degrees off the line of sight. We assume that the two most massive early B-type stars in the cloud, illuminating stars of the two reflection nebulae, were formed by collisional triggering at the interfaces between the two clouds. Given the other young high-mass star forming regions, namely, M42, M43, and NGC 2024 (Fukui et al. 2018b; Ohama et al. 2017a), it seems possible that collisional triggering has been independently working to form O-type and early B-type stars in Orion in the last Myr over a projected distance of ~80 pc. △ Less

Submitted 4 December, 2019; v1 submitted 18 June, 2017; originally announced June 2017.

Comments: 20 peges, 7 figures

Molecular gas in the compact H{\sc ii} region RCW 166; possible evidence for an early phase of cloud-cloud collision prior to the bubble formation

Authors: Akio Ohama, Mikito Kono, Shinji Fujita, Daichi Tsutsumi, Yusuke Hattori, Kazufumi Torii, Atsushi Nishimura, Hidetoshi Sano, Hiroaki Yamamoto, Kengo Tachihara, Yasuo Fukui

Abstract: Young HII regions are an important site to study O star formation based on distributions of ionized and molecular gas. We revealed that two molecular clouds at $\sim 48$ km s$^{-1}$ and $\sim 53$ km s$^{-1}$ are associated with the HII regions G018.149-00.283 in RCW 166 by using the JCMT CO High-Resolution Survey (COHRS) of the $^{12}$CO ($J$=3--2) emission. G018.149-00.283 comprises a bright ring… ▽ More Young HII regions are an important site to study O star formation based on distributions of ionized and molecular gas. We revealed that two molecular clouds at $\sim 48$ km s$^{-1}$ and $\sim 53$ km s$^{-1}$ are associated with the HII regions G018.149-00.283 in RCW 166 by using the JCMT CO High-Resolution Survey (COHRS) of the $^{12}$CO ($J$=3--2) emission. G018.149-00.283 comprises a bright ring at 8 $μ$m and an extended HII region inside the ring. The $\sim 48$ km s$^{-1}$ cloud delineates the ring, and the $\sim 53$ km s$^{-1}$ cloud is located within the ring, indicating a complementary distribution between the two molecular components. We propose a hypothesis that high-mass stars within G018.149-00.283 were formed by triggering in cloud-cloud collision at a projected velocity separation of $\sim 5$ km s$^{-1}$. We argue that G018.149-00.283 is in an early evolutionary stage, $\sim 0.1$ Myr after the collision according to the scheme by [hab92] which will be followed by a bubble formation stage like RCW 120. We also suggested that nearby HII regions N21 and N22 are candidates for bubbles possibly formed by cloud-cloud collision. [ino13] showed that the interface gas becomes highly turbulent and realizes a high-mass accretion rate of $10^{-3}$ -- $10^{-4}$ $M_{\odot}$ $/$yr by magnetohydrodynamical numerical simulations, which offers an explanation of the O-star formation. A fairly high frequency of cloud-cloud collision in RCW 166 is probably due to the high cloud density in this part of the Scutum arm. △ Less

Submitted 15 February, 2018; v1 submitted 18 June, 2017; originally announced June 2017.

Comments: 21 pages, 9 figures

A new look at the molecular gas in M42 and M43; possible evidence for cloud-cloud collision which triggered formation of the OB stars in the Orion Nebula Cluster

Authors: Yasuo Fukui, Kazufumi Torii, Yusuke Hattori, Atsushi Nishimura, Akio Ohama, Yoshito Shimajiri, Kazuhiro Shima, Asao Habe, Hidetoshi Sano, Mikito Kohno, Hiroaki Yamamoto, Kengo Tachihara, Toshikazu Onishi

Abstract: The Orion Nebula Cluster toward the HII region M42 is the most outstanding young cluster at the smallest distance 410pc among the rich high-mass stellar clusters. By newly analyzing the archival molecular data of the 12CO(J=1-0) emission at 21" resolution, we identified at least three pairs of complementary distributions between two velocity components at 8km/s and 13km/s. We present a hypothesis… ▽ More The Orion Nebula Cluster toward the HII region M42 is the most outstanding young cluster at the smallest distance 410pc among the rich high-mass stellar clusters. By newly analyzing the archival molecular data of the 12CO(J=1-0) emission at 21" resolution, we identified at least three pairs of complementary distributions between two velocity components at 8km/s and 13km/s. We present a hypothesis that the two clouds collided with each other and triggered formation of the high-mass stars, mainly toward two regions including the nearly ten O stars, theta1 Ori and theta2 Ori, in M42 and the B star, NU Ori, in M43. The timescale of the collision is estimated to be ~0.1Myr by a ratio of the cloud size and velocity corrected for projection, which is consistent with the age of the youngest cluster members less than 0.1Myr. The majority of the low-mass cluster members were formed prior to the collision in the last one Myr. We discuss implications of the present hypothesis and the scenario of high-mass star formation by comparing with the other eight cases of triggered O star formation via cloud-cloud collision. △ Less

Submitted 15 May, 2018; v1 submitted 17 January, 2017; originally announced January 2017.

Comments: 32 pages, 19 figures. Accepted for publication in the Astrophysical Journal

Triggered O star formation in M20 via cloud-cloud collision: Comparisons between high-resolution CO observations and simulations

Authors: Kazufumi Torii, Yusuke Hattori, Keisuke Hasegawa, AKio Ohama, Thomas J. Haworth, Kazuhiro Shima, Aasao Habe, Kengo Tachihara, Norikazu Mizuno, Toshikazu Onishi, Akira Mizuno, Yasuo Fukui

Abstract: High-mass star formation is one of the top-priority issues in astrophysics. Recent observational studies are revealing that cloud-cloud collisions may play a role in high-mass star formation in several places in the Milky Way and the Large Magellanic Cloud. The Trifid Nebula M20 is a well known galactic HII region ionized by a single O7.5 star. In 2011, based on the CO observations with NANTEN2 we… ▽ More High-mass star formation is one of the top-priority issues in astrophysics. Recent observational studies are revealing that cloud-cloud collisions may play a role in high-mass star formation in several places in the Milky Way and the Large Magellanic Cloud. The Trifid Nebula M20 is a well known galactic HII region ionized by a single O7.5 star. In 2011, based on the CO observations with NANTEN2 we reported that the O star was formed by the collision between two molecular clouds ~0.3,Myr ago. Those observations identified two molecular clouds towards M20, traveling at a relative velocity of 7.5 km/s. This velocity separation implies that the clouds cannot be gravitationally bound to M20, but since the clouds show signs of heating by the stars there they must be spatially coincident with it. A collision is therefore highly possible. In this paper we present the new CO J=1-0 and J=3-2 observations of the colliding clouds in M20 performed with the Mopra and ASTE telescopes. The high resolution observations revealed the two molecular clouds have peculiar spatial and velocity structures, i.e., the spatially complementary distribution between the two clouds and the bridge feature which connects the two clouds in velocity space. Based on a new comparison with numerical models, we find that this complementary distribution is an expected outcome of cloud-cloud collisions, and that the bridge feature can be interpreted as the turbulent gas excited at the interface of the collision. Our results reinforce the cloud-cloud collision scenario in M20. △ Less

Submitted 30 December, 2016; originally announced December 2016.

Comments: accepted for publication in ApJ

Comparison of device structures for the dielectric breakdown measurement of hexagonal boron nitride

Authors: Yoshiaki Hattori, Takashi Taniguchi, Kenji Watanabe, Kosuke Nagashio

Abstract: Improving the film quality in the synthesis of large-area hexagonal boron nitride films (h-BN) for two-dimensional material devices remains a great challenge. The measurement of electrical breakdown dielectric strength (EBD) is one of the most important methods to elucidate the insulating quality of h-BN. In this work, the EBD of high quality exfoliated single-crystal h-BN was investigated using t… ▽ More Improving the film quality in the synthesis of large-area hexagonal boron nitride films (h-BN) for two-dimensional material devices remains a great challenge. The measurement of electrical breakdown dielectric strength (EBD) is one of the most important methods to elucidate the insulating quality of h-BN. In this work, the EBD of high quality exfoliated single-crystal h-BN was investigated using three different electrode structures under different environmental conditions to determine the ideal electrode structure and environment for EBD measurement. A systematic investigation revealed that EBD is not sensitive to contact force or electrode area but strongly depends on the relative humidity during measurement. Once the measurement environment is properly managed, it was found that the EBD values are consistent within experimental error regardless of the electrode structure, which enables the evaluation of the crystallinity of synthesized h-BN at the microscopic and macroscopic level by utilizing the three different electrode structures properly for different purposes. △ Less

Submitted 22 December, 2016; originally announced December 2016.

Journal ref: APL, 2016, 109, 253111

Anisotropic Dielectric Breakdown Strength of Single Crystal Hexagonal Boron Nitride

Authors: Yoshiaki Hattori, Takashi Taniguchi, Kenji Watanabe, Kosuke Nagashio

Abstract: Dielectric breakdown has historically been of great interest from the perspectives of fundamental physics and electrical reliability. However, to date, the anisotropy in the dielectric breakdown has not been discussed. Here, we report an anisotropic dielectric breakdown strength (EBD) for h-BN, which is used as an ideal substrate for two-dimensional (2D) material devices. Under a well-controlled r… ▽ More Dielectric breakdown has historically been of great interest from the perspectives of fundamental physics and electrical reliability. However, to date, the anisotropy in the dielectric breakdown has not been discussed. Here, we report an anisotropic dielectric breakdown strength (EBD) for h-BN, which is used as an ideal substrate for two-dimensional (2D) material devices. Under a well-controlled relative humidity, EBD values in the directions both normal and parallel to the c axis (EBD+c & EBD//c) were measured to be 3 and 12 MV/cm, respectively. When the crystal structure is changed from sp3 of cubic-BN (c-BN) to sp2 of h-BN, EBD+c for h-BN becomes smaller than that for c-BN, while EBD//c for h-BN drastically increases. Therefore, h-BN can possess a relatively high EBD concentrated only in the direction parallel to the c axis by conceding a weak bonding direction in the highly anisotropic crystal structure. This explains why the EBD//c for h-BN is higher than that for diamond. Moreover, the presented EBD value obtained from the high quality bulk h-BN crystal can be regarded as the standard for qualifying the crystallinity of h-BN layers grown via chemical vapor deposition for future electronic applications. △ Less

Submitted 31 October, 2016; originally announced October 2016.

Journal ref: ACS appl. mater. interfaces, 2016, 8, 27877

Searching for turbulence models by artificial neural network

Authors: Masataka Gamahara, Yuji Hattori

Abstract: Artificial neural network (ANN) is tested as a tool for finding a new subgrid model of the subgrid-scale (SGS) stress in large-eddy simulation. ANN is used to establish a functional relation between the grid-scale (GS) flow field and the SGS stress without any assumption of the form of function. Data required for training and test of ANN are provided by direct numerical simulation (DNS) of a turbu… ▽ More Artificial neural network (ANN) is tested as a tool for finding a new subgrid model of the subgrid-scale (SGS) stress in large-eddy simulation. ANN is used to establish a functional relation between the grid-scale (GS) flow field and the SGS stress without any assumption of the form of function. Data required for training and test of ANN are provided by direct numerical simulation (DNS) of a turbulent channel flow. It is shown that ANN can establish a model similar to the gradient model. The correlation coefficients between the real SGS stress and the output of ANN are comparable to or larger than similarity models, but smaller than a two-parameter dynamic mixed model. △ Less

Submitted 23 June, 2016; originally announced July 2016.

Journal ref: Phys. Rev. Fluids 2, 054604 (2017)

Kinematic Structure of Molecular Gas around High-mass Star YSO, Papillon Nebula, in N159 East in the Large Magellanic Cloud

Authors: Kazuya Saigo, Toshikazu Onishi, Omnarayani Nayak, Margaret Meixner, Kazuki Tokuda, Ryohei Harada, Yuuki Morioka, Marta Sewilo, Remy Indebetouw, Kazufumi Torii, Akiko Kawamura, Akio Ohama, Yusuke Hattori, Hiroaki Yamamoto, Kengo Tachihara, Tetsuhiro Minamidani, Tsuyoshi Inoue, Suzanne Madden, Maud Galametz, Vianney Lebouteiller, C. -H. Rosie Chen, Norikazu Mizuno, Yasuo Fukui

Abstract: We present the ALMA Band 3 and Band 6 results of 12CO(2-1), 13$CO(2-1), H30alpha recombination line, free-free emission around 98 GHz, and the dust thermal emission around 230 GHz toward the N159 East Giant Molecular Cloud (N159E) in the Large Magellanic Cloud (LMC). LMC is the nearest active high-mass star forming face-on galaxy at a distance of 50 kpc and is the best target for studing high-mass… ▽ More We present the ALMA Band 3 and Band 6 results of 12CO(2-1), 13$CO(2-1), H30alpha recombination line, free-free emission around 98 GHz, and the dust thermal emission around 230 GHz toward the N159 East Giant Molecular Cloud (N159E) in the Large Magellanic Cloud (LMC). LMC is the nearest active high-mass star forming face-on galaxy at a distance of 50 kpc and is the best target for studing high-mass star formation. ALMA observations show that N159E is the complex of filamentary clouds with the width and length of ~1 pc and 5 pc - 10 pc, respectively. The total molecular mass is 0.92 x 10^5 Msun from the 13CO(2-1) intensity. N159E harbors the well-known Papillon Nebula, a compact high-excitation HII region. We found that a YSO associated with the Papillon Nebula has the mass of 35 Msun and is located at the intersection of three filamentary clouds. It indicates that the formation of the high-mass YSO was induced by the collision of filamentary clouds. Fukui et al. 2015 reported a similar kinematic structure toward a YSO in the N159 West region which is another YSO that has the mass larger than 35 Msun in these two regions. This suggests that the collision of filamentary clouds is a primary mechanism of high-mass star formation. We found a small molecular hole around the YSO in Papillon Nebula with sub-pc scale. It is filled by free-free and H30alpha emission. Temperature of the molecular gas around the hole reaches ~ 80 K. It indicates that this YSO has just started the distruction of parental molecular cloud. △ Less

Submitted 20 April, 2016; originally announced April 2016.

Comments: 28 pages, 7 figures. Submitted to ApJ

A massive molecular outflow in the dense dust core AGAL G337.916-00.477

Authors: Kazufumi Torii, Yusuke Hattori, Keisuke Hasegawa, Akio Ohama, Hiroaki Yamamoto, Kengo Tachihara, Kazuki Tokuda, Toshikazu Onishi, Yasuki Hattori, Daisuke Ishihara, Hidehiro Kaneda, Yasuo Fukui

Abstract: Massive molecular outflows erupting from high-mass young stellar objects provide important clues to understanding the mechanism of high-mass star formation. Based on new CO J=3-2 and J=1-0 observations using the Atacama Submillimeter Telescope Experiment (ASTE) and Mopra telescope facilities, we discovered a massive bipolar outflow associated with the dense dust core AGALG337.916-00.477 (AGAL337.9… ▽ More Massive molecular outflows erupting from high-mass young stellar objects provide important clues to understanding the mechanism of high-mass star formation. Based on new CO J=3-2 and J=1-0 observations using the Atacama Submillimeter Telescope Experiment (ASTE) and Mopra telescope facilities, we discovered a massive bipolar outflow associated with the dense dust core AGALG337.916-00.477 (AGAL337.9-S), located 3.48 kpc from the Sun. The outflow lobes have extensions of less than 1 pc -and thus were not fully resolved in the angular resolutions of ASTE and Mopra- and masses of 35-40 M_sun. The maximum velocities of the outflow lobes are as high as 35-40 km/s. Our analysis of the infrared and sub-mm data indicates that AGAL337.9-S is in an early evolutionary stage of the high-mass star formation, having the total far-infrared luminosity of ~5x10^4 L_sun. We also found that another dust core AGALG337.922-00.456 (AGAL337.9-N) located 2' north of AGAL337.9-S is a high-mass young stellar object in an earlier evolutional stage than AGAL337.9-S, although it is less bright in the mid-infrared than AGAL337.9-S. △ Less

Submitted 27 April, 2017; v1 submitted 19 April, 2016; originally announced April 2016.

Comments: 15 pages, 7 figures, 3 tables, accepted for publication in ApJ

Mid- and far-infrared properties of Spitzer Galactic bubbles revealed by the AKARI all-sky surveys

Authors: Yasuki Hattori, Hidehiro Kaneda, Daisuke Ishihara, Yasuo Fukui, Kazufumi Torii, Misaki Hanaoka, Takuma Kokusho, Akino Kondo, Kazuyuki Shichi, Sota Ukai, Mitsuyoshi Yamagishi, Yuta Yamaguchi

Abstract: We have carried out a statistical study on the mid- and far-infrared (IR) properties of Galactic IR bubbles observed by Spitzer. Using the Spitzer 8 $μ{\rm m}$ images, we estimated the radii and covering fractions of their shells, and categorized them into closed, broken and unclassified bubbles with our data analysis method. Then, using the AKARI all-sky images at wavelengths of 9, 18, 65, 90, 14… ▽ More We have carried out a statistical study on the mid- and far-infrared (IR) properties of Galactic IR bubbles observed by Spitzer. Using the Spitzer 8 $μ{\rm m}$ images, we estimated the radii and covering fractions of their shells, and categorized them into closed, broken and unclassified bubbles with our data analysis method. Then, using the AKARI all-sky images at wavelengths of 9, 18, 65, 90, 140 and 160 $μ{\rm m}$, we obtained the spatial distributions and the luminosities of polycyclic aromatic hydrocarbon (PAH), warm and cold dust components by decomposing 6-band spectral energy distributions with model fitting. As a result, 180 sample bubbles show a wide range of the total IR luminosities corresponding to the bolometric luminosities of a single B-type star to many O-type stars. For all the bubbles, we investigated relationships between the radius, luminosities and luminosity ratios, and found that there are overall similarities in the IR properties among the bubbles regardless of their morphological types. In particular, they follow a power-law relation with an index of $\sim$3 between the total IR luminosity and radius, as expected from the conventional picture of the Str$\rm{\ddot{o}}$mgren sphere. The exceptions are large broken bubbles; they indicate higher total IR luminosities, lower fractional luminosities of the PAH emission, and dust heating sources located nearer to the shells. We discuss the implications of those differences for a massive star-formation scenario. △ Less

Submitted 7 March, 2016; originally announced March 2016.

Comments: 59 pages, 15 figures (figs. 1, 3, 9, 10, 13 and 14 uploaded with low-resolution), accepted for publication in PASJ

Fully dry PMMA transfer of graphene on h-BN using a heating/cooling system

Authors: T. Uwanno, Y. Hattori, T. Taniguchi, K. Watanabe, K. Nagashio

Abstract: The key to achieve high-quality van der Waals heterostructure devices made of stacking various two-dimensional (2D) layered materials lies in the clean interface without bubbles and wrinkles. Although polymethylmethacrylate (PMMA) is generally used as a sacrificial transfer film due to its strong adhesion property, it is always dissolved in the solvent after the transfer, resulting in the unavoida… ▽ More The key to achieve high-quality van der Waals heterostructure devices made of stacking various two-dimensional (2D) layered materials lies in the clean interface without bubbles and wrinkles. Although polymethylmethacrylate (PMMA) is generally used as a sacrificial transfer film due to its strong adhesion property, it is always dissolved in the solvent after the transfer, resulting in the unavoidable PMMA residue on the top surface. This makes it difficult to locate clean interface areas. In this work, we present a fully dry PMMA transfer of graphene onto h-BN using a heating/cooling system which allows identification of clean interface area for high quality graphene/h-BN heterostructure fabrication. The mechanism lies in the utilization of the large difference in thermal expansion coefficients between polymers (PMMA/PDMS) and inorganic materials (graphene/h-BN substrate) to mechanically peel off PMMA from graphene by the thermal shrinkage of polymers, leaving no PMMA residue on the graphene surface. This method can be applied to all types of 2D layered materials. △ Less

Submitted 23 November, 2015; originally announced November 2015.

Comments: 2D materials, 2015, in press

Journal ref: 2D materials, 2015, 2, 041002

Layer-by-Layer Dielectric Breakdown of Hexagonal Boron Nitride

Authors: Y. Hattori, K. Watanabe, T. Taniguchi, K. Nagashio

Abstract: Hexagonal boron nitride (BN) is widely used as a substrate and gate insulator for two-dimensional (2D) electronic devices. The studies on insulating properties and electrical reliability of BN itself, however, are quite limited. Here, we report a systematic investigation of the dielectric breakdown characteristics of BN using conductive atomic force microscopy. The electric field strength was foun… ▽ More Hexagonal boron nitride (BN) is widely used as a substrate and gate insulator for two-dimensional (2D) electronic devices. The studies on insulating properties and electrical reliability of BN itself, however, are quite limited. Here, we report a systematic investigation of the dielectric breakdown characteristics of BN using conductive atomic force microscopy. The electric field strength was found to be ~12 MV/cm, which is comparable to that of conventional SiO2 oxides because of the covalent bonding nature of BN. After the hard dielectric breakdown, the BN fractured like a flower into equilateral triangle fragments. However, when the applied voltage was terminated precisely in the middle of the dielectric breakdown, the formation of a hole that did not penetrate to the bottom metal electrode was clearly observed. Subsequent I-V measurements of the hole indicated that the BN layer remaining in the hole was still electrically inactive. Based on these observations, layer-by-layer breakdown was confirmed for BN with regard to both physical fracture and electrical breakdown. Moreover, statistical analysis of the breakdown voltages using a Weibull plot suggested the anisotropic formation of defects. These results are unique to layered materials and unlike the behavior observed for conventional 3D amorphous oxides. △ Less

Submitted 7 October, 2015; originally announced October 2015.

Journal ref: ACS nano, 2015, 9, 916

The two molecular clouds in RCW 38; evidence for formation of the youngest super star cluster in the Milky Way triggered by cloud-cloud collision

Authors: Y. Fukui, K. Torii, A. Ohama, K. Hasegawa, Y. Hattori, H. Sano, S. Ohashi, K. Fujii, S. Kuwahara, N. Mizuno, J. R. Dawson, H. Yamamoto, K. Tachihara, T. Okuda, T. Onishi, A. Mizuno

Abstract: We present distributions of two molecular clouds having velocities of 2 km s$^{-1}$ and 14 km s$^{-1}$ toward RCW 38, the youngest super star cluster in the Milky Way, in the $^{12}$CO ($J=$1--0 and 3--2) and $^{13}$CO ($J=$1--0) transitions. The two clouds are likely physically associated with the cluster as verified by the high intensity ratio of the $J$=3--2 emission to the $J$=1--0 emission, t… ▽ More We present distributions of two molecular clouds having velocities of 2 km s$^{-1}$ and 14 km s$^{-1}$ toward RCW 38, the youngest super star cluster in the Milky Way, in the $^{12}$CO ($J=$1--0 and 3--2) and $^{13}$CO ($J=$1--0) transitions. The two clouds are likely physically associated with the cluster as verified by the high intensity ratio of the $J$=3--2 emission to the $J$=1--0 emission, the bridging feature connecting the two clouds in velocity and their morphological correspondence with the infrared dust emission. The total mass of the clouds and the cluster is too small to gravitationally bind the velocity difference. We frame a hypothesis that the two clouds are colliding with each other by chance to trigger formation of the $\sim$20 candidate O stars which are localized within $\sim$0.3 pc of the cluster center in the 2 km s$^{-1}$ cloud. We suggest that the collision is currently continuing toward part of the 2 km s$^{-1}$ cloud where the bridging feature is localized. This is the third super star cluster alongside of Westerlund2 and NGC3603 where cloud-cloud collision triggered the cluster formation. RCW38 is the most remarkable and youngest cluster, holding a possible sign of on-going O star formation, and is the most promising site where we may be able to witness the moment of O-star formation. △ Less

Submitted 7 April, 2016; v1 submitted 21 April, 2015; originally announced April 2015.

Journal ref: The Astrophysical Journal, Volume 820, Issue 1, article id. 26, 17 pp. (2016)

Explosive magnetic reconnection caused by an X-shaped current-vortex layer in a collisionless plasma

Authors: Makoto Hirota, Yuji Hattori, Philip J. Morrison

Abstract: A mechanism for explosive magnetic reconnection is investigated by analyzing the nonlinear evolution of a collisionless tearing mode in a two-fluid model that includes the effects of electron inertia and temperature. These effects cooperatively enable a fast reconnection by forming an X-shaped current-vortex layer centered at the reconnection point. A high-resolution simulation of this model for a… ▽ More A mechanism for explosive magnetic reconnection is investigated by analyzing the nonlinear evolution of a collisionless tearing mode in a two-fluid model that includes the effects of electron inertia and temperature. These effects cooperatively enable a fast reconnection by forming an X-shaped current-vortex layer centered at the reconnection point. A high-resolution simulation of this model for an unprecedentedly small electron skin depth $d_e$ and ion-sound gyroradius $ρ_s$, satisfying $d_e=ρ_s$, shows an explosive tendency for nonlinear growth of the tearing mode, where it is newly found that the explosive widening of the X-shaped layer occurs locally around the reconnection point with the length of the X shape being shorter than the domain length and the wavelength of the linear tearing mode. The reason for the onset of this locally enhanced reconnection is explained theoretically by develo** a novel nonlinear and nonequilibrium inner solution that models the local X-shaped layer, and then matching it to an outer solution that is approximated by a linear tearing eigenmode with a shorter wavelength than the domain length. This theoretical model proves that the local reconnection can release the magnetic energy more efficiently than the global one and the estimated scaling of the explosive growth rate agrees well with the simulation results. △ Less

Submitted 23 March, 2015; originally announced March 2015.

Comments: 26 pages, 11 figures

Journal ref: Physics of Plasmas 22, 052114 (2015)

High-mass star formation triggered by collision between CO filaments in N159 West in the Large Magellanic Cloud

Authors: Yasuo Fukui, Ryohei Harada, Kazuki Tokuda, Yuuki Morioka, Toshikazu Onishi, Kazufumi Torii, Akio Ohama, Yusuke Hattori, Omnarayani Nayak, Margaret Meixner, Marta Sewilo, Remy Indebetouw, Akiko Kawamura, Kazuya Saigo, Hiroaki Yamamoto, Kengo Tachihara, Tetsuhiro Minamidani, Tsuyoshi Inoue, Suzanna Madden, Maud Galametz, Vianney Lebouteiller, Norikazu Mizuno, Rosie Chen

Abstract: We have carried out 13CO(J=2-1) observations of the active star-forming region N159 West in the LMC with ALMA. We have found that the CO distribution at a sub-pc scale is highly elongated with a small width. These elongated clouds called "filaments" show straight or curved distributions with a typical width of 0.5-1.0pc and a length of 5-10pc. All the known infrared YSOs are located toward the fil… ▽ More We have carried out 13CO(J=2-1) observations of the active star-forming region N159 West in the LMC with ALMA. We have found that the CO distribution at a sub-pc scale is highly elongated with a small width. These elongated clouds called "filaments" show straight or curved distributions with a typical width of 0.5-1.0pc and a length of 5-10pc. All the known infrared YSOs are located toward the filaments. We have found broad CO wings of two molecular outflows toward young high-mass stars in N159W-N and N159W-S, whose dynamical timescale is ~10^4 yrs. This is the first discovery of protostellar outflow in external galaxies. For N159W-S which is located toward an intersection of two filaments we set up a hypothesis that the two filaments collided with each other ~10^5 yrs ago and triggered formation of the high-mass star having ~37 Mo. The colliding clouds show significant enhancement in linewidth in the intersection, suggesting excitation of turbulence in the shocked interface layer between them as is consistent with the magneto-hydro-dynamical numerical simulations (Inoue & Fukui 2013). This turbulence increases the mass accretion rate to ~6x10^-4 Mo yr^-1, which is required to overcome the stellar feedback to form the high-mass star. △ Less

Submitted 27 May, 2015; v1 submitted 11 March, 2015; originally announced March 2015.

Comments: 20 pages, 3 figures, accepted for publication in ApJL

Cloud-cloud collision as a trigger of the high-mass star formation; a molecular line study in RCW120

Authors: K. Torii, K. Hasegawa, Y. Hattori, H. Sano, A. Ohama, H. Yamamoto, K. Tachihara, S. Soga, S. Shimizu, T. Okuda, N. Mizuno, T. Onishi, A. Mizuno, Y. Fukui

Abstract: RCW120 is a Galactic HII region having a beautiful ring shape bright in infrared. Our new CO J=1-0 and J=3-2 observations performed with the NANTEN2, Mopra, and ASTE telescopes have revealed that two molecular clouds with a velocity separation of 20km/s are both physically associated with RCW120. The cloud at -8km/s apparently traces the infrared ring, while the other cloud at -28km/s is distribut… ▽ More RCW120 is a Galactic HII region having a beautiful ring shape bright in infrared. Our new CO J=1-0 and J=3-2 observations performed with the NANTEN2, Mopra, and ASTE telescopes have revealed that two molecular clouds with a velocity separation of 20km/s are both physically associated with RCW120. The cloud at -8km/s apparently traces the infrared ring, while the other cloud at -28km/s is distributed just outside the opening of the infrared ring, interacting with the HII region as supported by high kinetic temperature of the molecular gas and by the complementary distribution with the ionized gas. A spherically expanding shell driven by the HII region is usually discussed as the origin of the observed ring structure in RCW120. Our observations, however, indicate no evidence of the expanding motion in the velocity space, being inconsistent with the expanding shell model. We here postulate an alternative that, by applying the model introduced by Habe & Ohta (1992), the exciting O star in RCW120 was formed by a collision between the present two clouds at a colliding velocity ~30km/s. In the model, the observed infrared ring can be interpreted as the cavity created in the larger cloud by the collision, whose inner surface is illuminated by the strong UV radiation after the birth of the O star. We discuss that the present cloud-cloud collision scenario explains the observed signatures of RCW120, i.e., its ring morphology, coexistence of the two clouds and their large velocity separation, and absence of the expanding motion. △ Less

Submitted 31 March, 2015; v1 submitted 28 February, 2015; originally announced March 2015.

Comments: 58 pages, 19 figures, accepted for publication in ApJ

Variational Necessary and Sufficient Stability Conditions for Inviscid Shear Flow

Authors: Makoto Hirota, Philip J. Morrison, Yuji Hattori

Abstract: A necessary and sufficient condition for linear stability of inviscid parallel shear flow is formulated by develo** a novel variational principle, where the velocity profile is assumed to be monotonic and analytic. It is shown that unstable eigenvalues of Rayleigh's equation (which is a non-selfadjoint eigenvalue problem) can be associated with positive eigenvalues of a certain selfadjoint opera… ▽ More A necessary and sufficient condition for linear stability of inviscid parallel shear flow is formulated by develo** a novel variational principle, where the velocity profile is assumed to be monotonic and analytic. It is shown that unstable eigenvalues of Rayleigh's equation (which is a non-selfadjoint eigenvalue problem) can be associated with positive eigenvalues of a certain selfadjoint operator. The stability is therefore determined by maximizing a quadratic form, which is theoretically and numerically more tractable than directly solving Rayleigh's equation. This variational stability criterion is based on the understandings of Krein signature for continuous spectrum and is applicable to other stability problems of infinite-dimensional Hamiltonian systems. △ Less

Submitted 4 February, 2014; originally announced February 2014.

Comments: 18pages, 4 figures, submitted to Proc. R. Soc. Lond. A

Variational Approach to Necessary and Sufficient Stability Conditions for Inviscid Shear Flow

Authors: Makoto Hirota, Philip J. Morrison, Yuji Hattori

Abstract: A necessary and sufficient condition for linear stability of inviscid parallel shear flow is formulated by a novel variational method, where the velocity profile is assumed to be monotonic and analytic. Unstable eigenvalues of the Rayleigh equation are shown to be associated with positive eigenvalues of a certain selfadjoint operator. The stability is therefore simply determined by maximizing a qu… ▽ More A necessary and sufficient condition for linear stability of inviscid parallel shear flow is formulated by a novel variational method, where the velocity profile is assumed to be monotonic and analytic. Unstable eigenvalues of the Rayleigh equation are shown to be associated with positive eigenvalues of a certain selfadjoint operator. The stability is therefore simply determined by maximizing a quadratic form, which is theoretically and numerically more tractable than directly solving the Rayleigh equation. This variational approach is based on the Hamiltonian nature of the inviscid fluid and will be applicable to other hydrodynamic stability problems. △ Less

Submitted 2 September, 2013; originally announced September 2013.

Comments: 2 pages, 2 figures, Tenth International Conference on Flow Dynamics (November 25-27, 2013)

Large-scale map** of the massive star-forming region RCW38 in the [CII] and PAH emission

Authors: H. Kaneda, T. Nakagawa, S. K. Ghosh, D. K. Ojha, D. Ishihara, T. Kondo, J. P. Ninan, M. Tanabe, Y. Fukui, Y. Hattori, T. Onaka, K. Torii, M. Yamagishi

Abstract: We investigate the large-scale structure of the interstellar medium (ISM) around the massive star cluster RCW38 in the [CII] 158 um line and polycyclic aromatic hydrocarbon (PAH) emission. We carried out [CII] line map** of an area of ~30'x15' for RCW~38 by a Fabry-Perot spectrometer on a 100 cm balloon-borne telescope with an angular resolution of ~1'.5. We compared the [CII] intensity map with… ▽ More We investigate the large-scale structure of the interstellar medium (ISM) around the massive star cluster RCW38 in the [CII] 158 um line and polycyclic aromatic hydrocarbon (PAH) emission. We carried out [CII] line map** of an area of ~30'x15' for RCW~38 by a Fabry-Perot spectrometer on a 100 cm balloon-borne telescope with an angular resolution of ~1'.5. We compared the [CII] intensity map with the PAH and dust emission maps obtained by the AKARI satellite. The [CII] emission shows a highly nonuniform distribution around the cluster, exhibiting the structure widely extended to the north and the east from the center. The [CII] intensity rapidly drops toward the southwest direction, where a CO cloud appears to dominate. We decompose the 3-160 um spectral energy distributions of the surrounding ISM structure into PAH as well as warm and cool dust components with the help of 2.5-5 um spectra. We find that the [CII] emission spatially corresponds to the PAH emission better than to the dust emission, confirming the relative importance of PAHs for photo-electric heating of gas in photo-dissociation regions. A naive interpretation based on our observational results indicates that molecular clouds associated with RCW38 are located both on the side of and behind the cluster. △ Less

Submitted 30 June, 2013; originally announced July 2013.

Comments: 10 pages, 7 figures, accepted for publication in A&A