Showing 1–8 of 8 results for author: Hassan, Y S

Clock-line-mediated Sisyphus Cooling

Authors: Chun-Chia Chen, Jacob L. Siegel, Benjamin D. Hunt, Tanner Grogan, Youssef S. Hassan, Kyle Beloy, Kurt Gibble, Roger C. Brown, Andrew D. Ludlow

Abstract: We demonstrate sub-recoil Sisyphus cooling using the long-lived $^{3}\mathrm{P}_{0}$ clock state in alkaline-earth-like ytterbium. A 1388 nm optical standing wave nearly resonant with the $^{3}\textrm{P}_{0}$$\,\rightarrow$$\,^{3}\textrm{D}_{1}$ transition creates a spatially periodic light shift of the $^{3}\textrm{P}_{0}$ clock state. Following excitation on the ultranarrow clock transition, we… ▽ More We demonstrate sub-recoil Sisyphus cooling using the long-lived $^{3}\mathrm{P}_{0}$ clock state in alkaline-earth-like ytterbium. A 1388 nm optical standing wave nearly resonant with the $^{3}\textrm{P}_{0}$$\,\rightarrow$$\,^{3}\textrm{D}_{1}$ transition creates a spatially periodic light shift of the $^{3}\textrm{P}_{0}$ clock state. Following excitation on the ultranarrow clock transition, we observe Sisyphus cooling in this potential, as the light shift is correlated with excitation to $^{3}\textrm{D}_{1}$ and subsequent spontaneous decay to the $^{1}\textrm{S}_{0}$ ground state. We observe that cooling enhances the loading efficiency of atoms into a 759 nm magic-wavelength one-dimensional (1D) optical lattice, as compared to standard Doppler cooling on the $^{1}\textrm{S}_{0}$$\,\rightarrow\,$$^{3}\textrm{P}_{1}$ transition. Sisyphus cooling yields temperatures below 200 nK in the weakly confined, transverse dimensions of the 1D optical lattice. These lower temperatures improve optical lattice clocks by facilitating the use of shallow lattices with reduced light shifts, while retaining large atom numbers to reduce the quantum projection noise. This Sisyphus cooling can be pulsed or continuous and is applicable to a range of quantum metrology applications. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Comments: 8 pages, 6 figures

Ratchet Loading and Multi-Ensemble Operation in an Optical Lattice Clock

Authors: Youssef S. Hassan, Takumi Kobayashi, Tobias Bothwell, Jacob L. Seigel, Benjamin D. Hunt, Kyle Beloy, Kurt Gibble, Tanner Grogan, Andrew D. Ludlow

Abstract: We demonstrate programmable control over the spatial distribution of ultra-cold atoms confined in an optical lattice. The control is facilitated through a combination of spatial manipulation of the magneto-optical trap and atomic population shelving to a metastable state. We first employ the technique to load an extended (5 mm) atomic sample with uniform density in an optical lattice clock, reduci… ▽ More We demonstrate programmable control over the spatial distribution of ultra-cold atoms confined in an optical lattice. The control is facilitated through a combination of spatial manipulation of the magneto-optical trap and atomic population shelving to a metastable state. We first employ the technique to load an extended (5 mm) atomic sample with uniform density in an optical lattice clock, reducing atomic interactions and realizing remarkable frequency homogeneity across the atomic cloud. We also prepare multiple spatially separated atomic ensembles and realize multi-ensemble clock operation within the standard one-dimensional (1D) optical lattice clock architecture. Leveraging this technique, we prepare two oppositely spin-polarized ensembles that are independently addressable, offering a platform for implementing spectroscopic protocols for enhanced tracking of local oscillator phase. Finally, we demonstrate a relative fractional frequency instability at one second of $2.4(1) \times10^{-17}$ between two ensembles, useful for characterization of intra-lattice differential systematics. △ Less

Submitted 30 May, 2024; originally announced May 2024.

Comments: 10 pages, 6 figures

Sub-recoil clock-transition laser cooling enabling shallow optical lattice clocks

Authors: X. Zhang, K. Beloy, Y. S. Hassan, W. F. McGrew, C-C Chen, J. L. Siegel, T. Grogan, A. D. Ludlow

Abstract: Laser cooling is a key ingredient for quantum control of atomic systems in a variety of settings. In divalent atoms, two-stage Doppler cooling is typically used to bring atoms to the uK regime. Here, we implement a pulsed radial cooling scheme using the ultranarrow 1S0-3P0 clock transition in ytterbium to realize sub-recoil temperatures, down to tens of nK. Together with sideband cooling along the… ▽ More Laser cooling is a key ingredient for quantum control of atomic systems in a variety of settings. In divalent atoms, two-stage Doppler cooling is typically used to bring atoms to the uK regime. Here, we implement a pulsed radial cooling scheme using the ultranarrow 1S0-3P0 clock transition in ytterbium to realize sub-recoil temperatures, down to tens of nK. Together with sideband cooling along the one-dimensional lattice axis, we efficiently prepare atoms in shallow lattices at an energy of 6 lattice recoils. Under these conditions key limits on lattice clock accuracy and instability are reduced, opening the door to dramatic improvements. Furthermore, tunneling shifts in the shallow lattice do not compromise clock accuracy at the 10-19 level. △ Less

Submitted 17 June, 2022; originally announced June 2022.

Optical coherence between atomic species at the second scale: improved clock comparisons via differential spectroscopy

Authors: May E. Kim, William F. McGrew, Nicholas V. Nardelli, Ethan R. Clements, Youssef S. Hassan, Xiaogang Zhang, Jose L. Valencia, Holly Leopardi, David B. Hume, Tara M. Fortier, Andrw D. Ludlow, David R. Leibrandt

Abstract: Comparisons of high-accuracy optical atomic clocks \cite{Ludlow2015} are essential for precision tests of fundamental physics \cite{Safronova2018}, relativistic geodesy \cite{McGrew2018, Grotti2018, Delva2019}, and the anticipated redefinition of the SI second \cite{Riehle2018}. The scientific reach of these applications is restricted by the statistical precision of interspecies comparison measure… ▽ More Comparisons of high-accuracy optical atomic clocks \cite{Ludlow2015} are essential for precision tests of fundamental physics \cite{Safronova2018}, relativistic geodesy \cite{McGrew2018, Grotti2018, Delva2019}, and the anticipated redefinition of the SI second \cite{Riehle2018}. The scientific reach of these applications is restricted by the statistical precision of interspecies comparison measurements. The instability of individual clocks is limited by the finite coherence time of the optical local oscillator (OLO), which bounds the maximum atomic interrogation time. In this letter, we experimentally demonstrate differential spectroscopy \cite{Hume2016}, a comparison protocol that enables interrogating beyond the OLO coherence time. By phase-coherently linking a zero-dead-time (ZDT) \cite{Schioppo2017} Yb optical lattice clock with an Al$^+$ single-ion clock via an optical frequency comb and performing synchronised Ramsey spectroscopy, we show an improvement in comparison instability relative to our previous result \cite{network2020frequency} of nearly an order of magnitude. To our knowledge, this result represents the most stable interspecies clock comparison to date. △ Less

Submitted 24 November, 2021; v1 submitted 20 September, 2021; originally announced September 2021.

Optical Atomic Clock Comparison through Turbulent Air

Authors: Martha I. Bodine, Jean-Daniel Deschênes, Isaac H. Khader, William C. Swann, Holly Leopardi, Kyle Beloy, Tobias Bothwell, Samuel M. Brewer, Sarah L. Bromley, Jwo-Sy Chen, Scott A. Diddams, Robert J. Fasano, Tara M. Fortier, Youssef S. Hassan, David B. Hume, Dhruv Kedar, Colin J. Kennedy, Amanda Koepke, David R. Leibrandt, Andrew D. Ludlow, William F. McGrew, William R. Milner, Daniele Nicolodi, Eric Oelker, Thomas E. Parker , et al. (10 additional authors not shown)

Abstract: We use frequency comb-based optical two-way time-frequency transfer (O-TWTFT) to measure the optical frequency ratio of state-of-the-art ytterbium and strontium optical atomic clocks separated by a 1.5 km open-air link. Our free-space measurement is compared to a simultaneous measurement acquired via a noise-cancelled fiber link. Despite non-stationary, ps-level time-of-flight variations in the fr… ▽ More We use frequency comb-based optical two-way time-frequency transfer (O-TWTFT) to measure the optical frequency ratio of state-of-the-art ytterbium and strontium optical atomic clocks separated by a 1.5 km open-air link. Our free-space measurement is compared to a simultaneous measurement acquired via a noise-cancelled fiber link. Despite non-stationary, ps-level time-of-flight variations in the free-space link, ratio measurements obtained from the two links, averaged over 30.5 hours across six days, agree to $6\times10^{-19}$, showing that O-TWTFT can support free-space atomic clock comparisons below the $10^{-18}$ level. △ Less

Submitted 11 September, 2020; v1 submitted 1 June, 2020; originally announced June 2020.

Journal ref: Phys. Rev. Research 2, 033395 (2020)

Frequency Ratio Measurements with 18-digit Accuracy Using a Network of Optical Clocks

Authors: Boulder Atomic Clock Optical Network, Collaboration, :, Kyle Beloy, Martha I. Bodine, Tobias Bothwell, Samuel M. Brewer, Sarah L. Bromley, Jwo-Sy Chen, Jean-Daniel Deschênes, Scott A. Diddams, Robert J. Fasano, Tara M. Fortier, Youssef S. Hassan, David B. Hume, Dhruv Kedar, Colin J. Kennedy, Isaac Khader, Amanda Koepke, David R. Leibrandt, Holly Leopardi, Andrew D. Ludlow, William F. McGrew, William R. Milner, Nathan R. Newbury , et al. (13 additional authors not shown)

Abstract: Atomic clocks occupy a unique position in measurement science, exhibiting higher accuracy than any other measurement standard and underpinning six out of seven base units in the SI system. By exploiting higher resonance frequencies, optical atomic clocks now achieve greater stability and lower frequency uncertainty than existing primary standards. Here, we report frequency ratios of the $^{27}$Al… ▽ More Atomic clocks occupy a unique position in measurement science, exhibiting higher accuracy than any other measurement standard and underpinning six out of seven base units in the SI system. By exploiting higher resonance frequencies, optical atomic clocks now achieve greater stability and lower frequency uncertainty than existing primary standards. Here, we report frequency ratios of the $^{27}$Al$^+$, $^{171}$Yb and $^{87}$Sr optical clocks in Boulder, Colorado, measured across an optical network spanned by both fiber and free-space links. These ratios have been evaluated with measurement uncertainties between $6\times10^{-18}$ and $8\times10^{-18}$, making them the most accurate reported measurements of frequency ratios to date. This represents a critical step towards redefinition of the SI second and future applications such as relativistic geodesy and tests of fundamental physics. △ Less

Submitted 29 May, 2020; originally announced May 2020.

Comments: 51 pages, 12 figures, 6 tables

Modeling motional energy spectra and lattice light shifts in optical lattice clocks

Authors: K. Beloy, W. F. McGrew, X. Zhang, D. Nicolodi, R. J. Fasano, Y. S. Hassan, R. C. Brown, A. D. Ludlow

Abstract: We develop a model to describe the motional (i.e., external degree of freedom) energy spectra of atoms trapped in a one-dimensional optical lattice, taking into account both axial and radial confinement relative to the lattice axis. Our model respects the coupling between axial and radial degrees of freedom, as well as other anharmonicities inherent in the confining potential. We further demonstra… ▽ More We develop a model to describe the motional (i.e., external degree of freedom) energy spectra of atoms trapped in a one-dimensional optical lattice, taking into account both axial and radial confinement relative to the lattice axis. Our model respects the coupling between axial and radial degrees of freedom, as well as other anharmonicities inherent in the confining potential. We further demonstrate how our model can be used to characterize lattice light shifts in optical lattice clocks, including shifts due to higher multipolar (magnetic dipole and electric quadrupole) and higher order (hyperpolarizability) coupling to the lattice field. We compare results for our model with results from other lattice light shift models in the literature under similar conditions. △ Less

Submitted 13 April, 2020; originally announced April 2020.

Comments: 19 pages; accepted to PRA

Journal ref: Phys. Rev. A 101, 053416 (2020)

Coherent Optical Clock Down-Conversion for Microwave Frequencies with 10-18 Instability

Authors: Takuma Nakamura, Josue Davila-Rodriguez, Holly Leopardi, Jeff A. Sherman, Tara M. Fortier, Xiaojun Xie, Joe C. Campbell, William F. McGrew, Xiaogang Zhang, Youssef S. Hassan, Daniele Nicolodi, Kyle Beloy, Andrew D. Ludlow, Scott A. Diddams, Franklyn Quinlan

Abstract: Optical atomic clocks are poised to redefine the SI second, thanks to stability and accuracy more than one hundred times better than the current microwave atomic clock standard. However, the best optical clocks have not seen their performance transferred to the electronic domain, where radar, navigation, communications, and fundamental research rely on less stable microwave sources. By comparing t… ▽ More Optical atomic clocks are poised to redefine the SI second, thanks to stability and accuracy more than one hundred times better than the current microwave atomic clock standard. However, the best optical clocks have not seen their performance transferred to the electronic domain, where radar, navigation, communications, and fundamental research rely on less stable microwave sources. By comparing two independent optical-to-electronic signal generators, we demonstrate a 10 GHz microwave signal with phase that exactly tracks that of the optical clock phase from which it is derived, yielding an absolute fractional frequency instability of 1*10-18 in the electronic domain. Such faithful reproduction of the optical clock phase expands the opportunities for optical clocks both technologically and scientifically for time-dissemination, navigation, and long-baseline interferometric imaging. △ Less

Submitted 9 March, 2020; v1 submitted 5 March, 2020; originally announced March 2020.

Comments: 19 page, 10 figures (including Supplementary Text)