-
Multi-Material Topology Optimization with Continuous Magnetization Direction for Permanent Magnet Synchronous Reluctance Motors
Authors:
Thomas Gauthey,
Peter Gangl,
Maya Hage Hassan
Abstract:
Permanent magnet-assisted synchronous reluctance motors (PMSynRM) have a significantly higher average torque than synchronous reluctance motors. Thus, determining an optimal design results in a multi-material topology optimization problem, where one seeks to distribute ferromagnetic material, air and permanent magnets within the rotor in an optimal manner. This study proposed a novel density-based…
▽ More
Permanent magnet-assisted synchronous reluctance motors (PMSynRM) have a significantly higher average torque than synchronous reluctance motors. Thus, determining an optimal design results in a multi-material topology optimization problem, where one seeks to distribute ferromagnetic material, air and permanent magnets within the rotor in an optimal manner. This study proposed a novel density-based distribution scheme, which allows for continuous magnetization direction instead of a finite set of angles. Thus, an interpolation scheme is established between properties pertaining to magnets and non-linear materials. This allows for new designs to emerge without introducing complex geometric parameterization or relying on the user's biases and intuitions. Toward reducing computation time, Nitsche-type mortaring is applied, allowing for free rotation of the rotor mesh relative to the stator mesh. The average torque is approximated using only four-point static positions. This study investigates several interpolation schemes and presents a new one inspired by the topological derivative. We propose to filter the final design for the magnetization angle using K-mean clustering accounting for technical feasibility constraints of magnets. Finally, the design of the electrical motor is proposed to maximize torque value.
△ Less
Submitted 10 July, 2021;
originally announced July 2021.
-
Beam Divergence Reduction of Vortex Waves with a Tailored Lens and a Tailored Reflector
Authors:
M. Haj Hassan,
B. Sievert,
J. T. Svejda,
A. Mostafa Ahmad,
J. Barowski,
A. Rennings,
I. Rolfes,
A. Sezgin,
D. Erni
Abstract:
In this paper, we present a tailored lens and a tailored reflector in order to reduce the large beam divergence inherent to Orbital Angular Momentum waves (OAM waves-Vortex waves) that are generated by an Uniform Circular Patch Antenna Array (UCA) at 10 GHz. The tailored lens and the tailored reflector are designed by the shape function (5) and (9) around the antenna s center axis, respectively. T…
▽ More
In this paper, we present a tailored lens and a tailored reflector in order to reduce the large beam divergence inherent to Orbital Angular Momentum waves (OAM waves-Vortex waves) that are generated by an Uniform Circular Patch Antenna Array (UCA) at 10 GHz. The tailored lens and the tailored reflector are designed by the shape function (5) and (9) around the antenna s center axis, respectively. The tailored lens is compared to UCA without and with conventional lens. The simulated and measured results show a significant improvement when using the tailored lens. Following, a tailored reflector is implemented and compared to UCA without and with conventional reflector. Firstly, the two reflectors are simulated with an impressed field source to neglect the influence of the UCA. The simulated results of the two reflectors show that the tailored reflector has a better performance than the conventional reflector when the height of the reflector $r_0$ is less than around 1.5 $λ$ and when the opening angle of the reflector theta is less than 38° (for UCA with $d$ of $λ/2$). In addition, the reflectors are simulated with real UCA with different shapes of PCB, which can disturb the reflected waves from the reflector. Two lenses and two reflectors are manufactured and measured in an anechoic chamber and compared to the simulation results. This paper shows that the vortex waves needs a special lens or a special reflector to reduce effictively the beam divergence especially when the radius of the UCA is very large.
△ Less
Submitted 1 July, 2020;
originally announced July 2020.
-
Cooperative Beamforming for Cognitive Radio-Based Broadcasting Systems with Asynchronous Interferences
Authors:
Mai H. Hassan,
Md. J. Hossain
Abstract:
In order to address the asynchronous interference issue for a generalized scenario with multiple primary and multiple secondary receivers, in this paper, we propose an innovative cooperative beamforming technique. In particular, the cooperative beamforming design is formulated as an optimization problem that maximizes the weighted sum achievable transmission rate of secondary destinations while it…
▽ More
In order to address the asynchronous interference issue for a generalized scenario with multiple primary and multiple secondary receivers, in this paper, we propose an innovative cooperative beamforming technique. In particular, the cooperative beamforming design is formulated as an optimization problem that maximizes the weighted sum achievable transmission rate of secondary destinations while it maintains the asynchronous interferences at the primary receivers below their target thresholds. In light of the intractability of the problem, we propose a two-phase suboptimal cooperative beamforming technique. First, it finds the beamforming directions corresponding to different secondary destinations. Second, it allocates the power among different beamforming directions. Due to the multiple interference constraints corresponding to multiple primary receivers, the power allocation scheme in the second phase is still complex. Therefore, we also propose a low complex power allocation algorithm. The proposed beamforming technique is extended for the cases, when cooperating CR nodes (CCRNs) have statistical or erroneous channel knowledge of the primary receivers. We also investigate the performance of joint CCRN selection and beamforming technique. The presented numerical results show that the proposed beamforming technique can significantly reduce the asynchronous interference signals at the primary receivers and increase the sum transmission rate of secondary destinations compared to the well known zero-forcing beamforming (ZFBF) technique.
△ Less
Submitted 8 May, 2014;
originally announced May 2014.
-
Hurwitz's matrices, Cayley transformation and the Cartan-Weyl basis for the orthogonal groups
Authors:
Mehdi Hage Hassan
Abstract:
We find the transformations from the basis of the hydrogen atom of n-dimensions to the basis of the harmonic oscillator of N=2(n-1) dimensions using the Cayley transformation and the Hurwitz matrices. We prove that the eigenfunctions of the Laplacian ∆n are also eigenfunctions of the Laplacien ∆N for n=1, 3, 5 and 9. A new parameterization of the transformation R8->R5 is derived. Thi…
▽ More
We find the transformations from the basis of the hydrogen atom of n-dimensions to the basis of the harmonic oscillator of N=2(n-1) dimensions using the Cayley transformation and the Hurwitz matrices. We prove that the eigenfunctions of the Laplacian ∆n are also eigenfunctions of the Laplacien ∆N for n=1, 3, 5 and 9. A new parameterization of the transformation R8->R5 is derived. This research leads us first to a new class of spherical functions of the classical groups we call it the bispherical harmonic functions. Secondly: the development of Hurwitz's matrix in terms of adjoint representation of the Cartan-Weyl basis for the orthogonal groups SO(n) leads to what we call the generating matrices of the Cartan-Weyl basis and then we establish it for n=2,4,8,... .
△ Less
Submitted 10 October, 2006;
originally announced October 2006.
-
Inertia tensor and cross product In n-dimensions space
Authors:
Mehdi Hage Hassan
Abstract:
We demonstrated using an elementary method that the inertia tensor of a material point and the cross product of two vectors were only possible in a three or seven dimensional space. The representation matrix of the cross product in the seven dimensional space and its properties were given. The relationship between the inertia tensor and the octonions algebra was emphasized for the first time in…
▽ More
We demonstrated using an elementary method that the inertia tensor of a material point and the cross product of two vectors were only possible in a three or seven dimensional space. The representation matrix of the cross product in the seven dimensional space and its properties were given. The relationship between the inertia tensor and the octonions algebra was emphasized for the first time in this work.
△ Less
Submitted 21 April, 2006;
originally announced April 2006.
-
On Hurwitz Transformations
Authors:
M. Hage Hassan,
M. Kibler
Abstract:
A bibliography on the Hurwitz transformations is given. We deal here, with some details, with two particular Hurwitz transformations, viz, the $\grq \to \grt$ Kustaanheimo-Stiefel transformation and its $\grh \to \grc$ compact extension. These transformations are derived in the context of Fock-Bargmann-Schwinger calculus with special emphasis on angular momentum theory.
A bibliography on the Hurwitz transformations is given. We deal here, with some details, with two particular Hurwitz transformations, viz, the $\grq \to \grt$ Kustaanheimo-Stiefel transformation and its $\grh \to \grc$ compact extension. These transformations are derived in the context of Fock-Bargmann-Schwinger calculus with special emphasis on angular momentum theory.
△ Less
Submitted 10 September, 1994;
originally announced September 1994.