-
Advanced surface treatments for medium-velocity superconducting RF cavities for high accelerating gradient continuous-wave operation
Authors:
K. McGee,
S. Kim,
K. Elliott,
A. Ganshyn,
W. Hartung,
P. Ostroumov,
A. Taylor,
T. Xu,
M. Martinello,
G. V. Eremeev,
A. Netepenko,
F. Furuta,
O. Melnychuk,
M. P. Kelly,
B. Guilfoyle,
T. Reid
Abstract:
Nitrogen-do** and furnace-baking are advanced high-Q0 recipes developed for 1.3 GHz TESLA-type cavities. These treatments will significantly benefit the high-Q0 linear accelerator community if they can be successfully adapted to different cavity styles and frequencies. Strong frequency- and geometry- dependence of these recipes makes the technology transfer amongst different cavity styles and fr…
▽ More
Nitrogen-do** and furnace-baking are advanced high-Q0 recipes developed for 1.3 GHz TESLA-type cavities. These treatments will significantly benefit the high-Q0 linear accelerator community if they can be successfully adapted to different cavity styles and frequencies. Strong frequency- and geometry- dependence of these recipes makes the technology transfer amongst different cavity styles and frequencies far from straightforward, and requires rigorous study. Upcoming high-Q0 continuous-wave linear accelerator projects, such as the proposed Michigan State University Facility for Rare Isotope Beam Energy Upgrade, and the underway Fermilab's Proton Improvement Plan-II, could benefit enormously from adapting these techniques to their beta_opt = 0.6 ~650 MHz 5-cell elliptical superconducting rf cavities, operating at an accelerating gradient of around ~17 MV/m. This is the first investigation of the adaptation of nitrogen do** and medium temperature furnace baking to prototype 644 MHz beta_opt = 0.65 cavities, with the aim of demonstrating the high-Q0 potential of these recipes in these novel cavities for future optimization as part of the FRIB400 project R&D. We find that nitrogen-do** delivers superior Q0, despite the sub-GHz operating frequency of these cavities, but is sensitive to the post-do** electropolishing removal step and experiences elevated residual resistance. Medium temperature furnace baking delivers reasonable performance with decreased residual resistance compared to the nitrogen doped cavity, but may require further recipe refinement. The gradient requirement for the FRIB400 upgrade project is comfortably achieved by both recipes.
△ Less
Submitted 20 July, 2023;
originally announced July 2023.
-
Beam Induced Electron Cloud Resonances in Dipole Magnetic Fields
Authors:
J. R. Calvey,
W. Hartung,
J. Makita,
M. Venturini
Abstract:
The buildup of low energy electrons in an accelerator, known as electron cloud, can be severely detrimental to machine performance. Under certain beam conditions, the beam can become resonant with the cloud dynamics, accelerating the buildup of electrons. This paper will examine two such effects: multipacting resonances, in which the cloud development time is resonant with the bunch spacing, and c…
▽ More
The buildup of low energy electrons in an accelerator, known as electron cloud, can be severely detrimental to machine performance. Under certain beam conditions, the beam can become resonant with the cloud dynamics, accelerating the buildup of electrons. This paper will examine two such effects: multipacting resonances, in which the cloud development time is resonant with the bunch spacing, and cyclotron resonances, in which the cyclotron period of electrons in a magnetic field is a multiple of bunch spacing. Both resonances have been studied directly in dipole fields using retarding field analyzers installed in the Cornell Electron Storage Ring (CESR). These measurements are supported by both analytical models and computer simulations.
△ Less
Submitted 23 July, 2016; v1 submitted 15 March, 2016;
originally announced March 2016.
-
In-Situ Measurements of the Secondary Electron Yield in an Accelerator Environment: Instrumentation and Methods
Authors:
W. H. Hartung,
D. M. Asner,
J. V. Conway,
C. A. Dennett,
S. Greenwald,
J. -S. Kim,
Y. Li,
T. P. Moore,
V. Omanovic,
M. A. Palmer,
C. R. Strohman
Abstract:
The performance of a particle accelerator can be limited by the build-up of an electron cloud (EC) in the vacuum chamber. Secondary electron emission from the chamber walls can contribute to EC growth. An apparatus for in-situ measurements of the secondary electron yield (SEY) in the Cornell Electron Storage Ring (CESR) was developed in connection with EC studies for the CESR Test Accelerator prog…
▽ More
The performance of a particle accelerator can be limited by the build-up of an electron cloud (EC) in the vacuum chamber. Secondary electron emission from the chamber walls can contribute to EC growth. An apparatus for in-situ measurements of the secondary electron yield (SEY) in the Cornell Electron Storage Ring (CESR) was developed in connection with EC studies for the CESR Test Accelerator program. The CESR in-situ system, in operation since 2010, allows for SEY measurements as a function of incident electron energy and angle on samples that are exposed to the accelerator environment, typically 5.3 GeV counter-rotating beams of electrons and positrons. The system was designed for periodic measurements to observe beam conditioning of the SEY with discrimination between exposure to direct photons from synchrotron radiation versus scattered photons and cloud electrons. The samples can be exchanged without venting the CESR vacuum chamber. Measurements have been done on metal surfaces and EC-mitigation coatings. The in-situ SEY apparatus and improvements to the measurement tools and techniques are described.
△ Less
Submitted 10 December, 2014;
originally announced December 2014.
-
Measurements of Electron Cloud Growth and Mitigation in Dipole, Quadrupole, and Wiggler Magnets
Authors:
J. R. Calvey,
W. Hartung,
Y. Li,
J. A. Livezey,
J. Makita,
M. A. Palmer,
D. Rubin
Abstract:
Retarding field analyzers (RFAs), which provide a localized measurement of the electron cloud, have been installed throughout the Cornell Electron Storage Ring (CESR), in different magnetic field environments. This paper describes the RFA designs developed for dipole, quadrupole, and wiggler field regions, and provides an overview of measurements made in each environment. The effectiveness of elec…
▽ More
Retarding field analyzers (RFAs), which provide a localized measurement of the electron cloud, have been installed throughout the Cornell Electron Storage Ring (CESR), in different magnetic field environments. This paper describes the RFA designs developed for dipole, quadrupole, and wiggler field regions, and provides an overview of measurements made in each environment. The effectiveness of electron cloud mitigations, including coatings, grooves, and clearing electrodes, are assessed with the RFA measurements.
△ Less
Submitted 22 August, 2014;
originally announced August 2014.
-
Report on Instrumentation and Methods for In-Situ Measurements of the Secondary Electron Yield in an Accelerator Environment
Authors:
W. H. Hartung,
D. M. Asner,
J. V. Conway,
C. A. Dennett,
S. Greenwald,
J. -S. Kim,
Y. Li,
T. P. Moore,
V. Omanovic,
M. A. Palmer,
C. R. Strohman
Abstract:
The achievable beam current and beam quality of a particle accelerator can be limited by the build-up of an electron cloud (EC) in the vacuum chamber. Secondary electron emission from the walls of the vacuum chamber can contribute to the growth of the electron cloud. An apparatus for in-situ measurements of the secondary electron yield (SEY) of samples in the vacuum chamber of the Cornell Electron…
▽ More
The achievable beam current and beam quality of a particle accelerator can be limited by the build-up of an electron cloud (EC) in the vacuum chamber. Secondary electron emission from the walls of the vacuum chamber can contribute to the growth of the electron cloud. An apparatus for in-situ measurements of the secondary electron yield (SEY) of samples in the vacuum chamber of the Cornell Electron Storage Ring (CESR) has been developed in connection with EC studies for the CESR Test Accelerator program (CesrTA). The CesrTA in-situ system, in operation since 2010, allows for SEY measurements as a function of incident electron energy and angle on samples that are exposed to the accelerator environment, typically 5.3 GeV counter-rotating beams of electrons and positrons. The system was designed for periodic measurements to observe beam conditioning of the SEY with discrimination between exposure to direct photons from synchrotron radiation versus scattered photons and cloud electrons. The SEY chambers can be isolated from the CESR beam pipe, allowing us to exchange samples without venting the CESR vacuum chamber. Measurements so far have been on metal surfaces and EC-mitigation coatings. The goal of the SEY measurement program is to improve predictive models for EC build-up and EC-induced beam effects. This report describes the CesrTA in-situ SEY apparatus, the measurement tool and techniques, and iterative improvements therein.
△ Less
Submitted 8 December, 2014; v1 submitted 2 July, 2014;
originally announced July 2014.
-
Measurement and Modeling of Electron Cloud in a Field Free Environment Using Retarding Field Analyzers
Authors:
J. R. Calvey,
G. Dugan,
W. Hartung,
J. A. Livezey,
J. Makita,
M. A. Palmer
Abstract:
As part of the CESR-TA program at Cornell, diagnostic devices to measure and quantify the electron cloud effect have been installed throughout the CESR ring. One such device is the Retarding Field Analyzer (RFA), which provides information on the local electron cloud density and energy distribution. In a magnetic field free environment, RFA measurements can be directly compared with simulation to…
▽ More
As part of the CESR-TA program at Cornell, diagnostic devices to measure and quantify the electron cloud effect have been installed throughout the CESR ring. One such device is the Retarding Field Analyzer (RFA), which provides information on the local electron cloud density and energy distribution. In a magnetic field free environment, RFA measurements can be directly compared with simulation to study the growth and dynamics of the cloud on a quantitative level. In particular, the photoemission and secondary emission characteristics of the instrumented chambers can be determined simultaneously.
△ Less
Submitted 1 April, 2014; v1 submitted 27 February, 2014;
originally announced February 2014.
-
Comparison of Electron Cloud Mitigating Coatings Using Retarding Field Analyzers
Authors:
J. R. Calvey,
W. Hartung,
Y. Li,
J. A. Livezey,
J. Makita,
M. A. Palmer,
D. Rubin
Abstract:
In 2008, the Cornell Electron Storage Ring (CESR) was reconfigured to serve as a test accelerator (CESR-TA) for next generation lepton colliders, in particular for the ILC dam** ring. A significant part of this program has been the installation of diagnostic devices to measure and quantify the electron cloud effect, a potential limiting factor in these machines. One such device is the Retarding…
▽ More
In 2008, the Cornell Electron Storage Ring (CESR) was reconfigured to serve as a test accelerator (CESR-TA) for next generation lepton colliders, in particular for the ILC dam** ring. A significant part of this program has been the installation of diagnostic devices to measure and quantify the electron cloud effect, a potential limiting factor in these machines. One such device is the Retarding Field Analyzer (RFA), which provides information on the local electron cloud density and energy distribution. Several different styles of RFAs have been designed, tested, and deployed throughout the CESR ring. They have been used to study the growth of the cloud in different beam conditions, and to evaluate the efficacy of different mitigation techniques. This paper will provide an overview of RFA results obtained in a magnetic field free environment.
△ Less
Submitted 21 March, 2014; v1 submitted 8 February, 2014;
originally announced February 2014.
-
Measurement and Compensation of Horizontal Crabbing at the Cornell Electron Storage Ring Test Accelerator
Authors:
M. P. Ehrlichman,
A. Chatterjee,
W. Hartung,
B. Heltsley,
D. P. Peterson,
N. Rider,
D. Rubin,
D. Sagan,
J. P. Shanks,
S. T. Wang
Abstract:
In storage rings, horizontal dispersion in the rf cavities introduces horizontal-longitudinal (xz) coupling, contributing to beam tilt in the xz plane. This coupling can be characterized by a "crabbing" dispersion term ζa that appears in the normal mode decomposition of the 1-turn transfer matrix. ζa is proportional to the rf cavity voltage and the horizontal dispersion in the cavity. We report ex…
▽ More
In storage rings, horizontal dispersion in the rf cavities introduces horizontal-longitudinal (xz) coupling, contributing to beam tilt in the xz plane. This coupling can be characterized by a "crabbing" dispersion term ζa that appears in the normal mode decomposition of the 1-turn transfer matrix. ζa is proportional to the rf cavity voltage and the horizontal dispersion in the cavity. We report experiments at the Cornell Electron Storage Ring Test Accelerator (CesrTA) where xz coupling was explored using three lattices with distinct crabbing properties. We characterize the xz coupling for each case by measuring the horizontal projection of the beam with a beam size monitor. The three lattice configurations correspond to a) 16 mrad xz tilt at the beam size monitor source point, b) compensation of the ζa introduced by one of two pairs of RF cavities with the second, and c) zero dispersion in RF cavities, eliminating ζa entirely. Additionally, intrabeam scattering (IBS) is evident in our measurements of beam size vs. rf voltage.
△ Less
Submitted 13 March, 2014; v1 submitted 7 November, 2013;
originally announced November 2013.
-
Measurement of Electron Trap** in the CESR Storage Ring
Authors:
M. G. Billing,
J. Conway,
E. E. Cowan,
J. A. Crittenden,
W. Hartung,
J. Lanzoni,
Y. Li,
C. S. Shill,
J. P. Sikora,
K. G. Sonnad
Abstract:
The buildup of low-energy electrons has been shown to affect the performance of a wide variety of particle accelerators. Of particular concern is the persistence of the cloud between beam bunch passages, which can impose limitations on the stability of operation at high beam current. We have obtained measurements of long-lived electron clouds trapped in the field of a quadrupole magnet in a positr…
▽ More
The buildup of low-energy electrons has been shown to affect the performance of a wide variety of particle accelerators. Of particular concern is the persistence of the cloud between beam bunch passages, which can impose limitations on the stability of operation at high beam current. We have obtained measurements of long-lived electron clouds trapped in the field of a quadrupole magnet in a positron storage ring, with lifetimes much longer than the revolution period. Based on modeling, we estimate that about 7% of the electrons in the cloud generated by a 20-bunch train of 5.3 GeV positrons with 16-ns spacing and $1.3x10^{11}$ population survive longer than 2.3 $μ$s in a quadrupole field of gradient 7.4 T/m. We have observed a non-monotonic dependence of the trap** effect on the bunch spacing. The effect of a witness bunch on the measured signal provides direct evidence for the existence of trapped electrons. The witness bunch is also observed to clear the cloud, demonstrating its effectiveness as a mitigation technique.
△ Less
Submitted 6 March, 2015; v1 submitted 10 September, 2013;
originally announced September 2013.
-
Intrabeam Scattering Studies at CesrTA
Authors:
M. P. Ehrlichman,
W. Hartung,
B. Heltsley,
D. P. Peterson,
N. Rider,
D. Rubin,
D. Sagan,
J. Shanks,
S. T. Wang,
R. Campbell,
R. Holtzapple
Abstract:
Intrabeam scattering (IBS) limits the emittance and single-bunch current that can be achieved in electron or positron storage ring colliders, dam** rings, and light sources. Much theoretical work on IBS exists, and while the theories have been validated in hadron and ion machines, the presence of strong dam** makes IBS in lepton machines a different phenomenon. We present the results of measur…
▽ More
Intrabeam scattering (IBS) limits the emittance and single-bunch current that can be achieved in electron or positron storage ring colliders, dam** rings, and light sources. Much theoretical work on IBS exists, and while the theories have been validated in hadron and ion machines, the presence of strong dam** makes IBS in lepton machines a different phenomenon. We present the results of measurements at CesrTA of IBS dominated beams, and compare the data with theory. The beams we study have parameters typical of those specified for the next generation of wiggler dominated storage rings: low emittance, small bunch length, and few GeV energy. Our measurements are in good agreement with IBS theory, provided a tail-cut procedure is applied.
△ Less
Submitted 14 October, 2013; v1 submitted 31 July, 2013;
originally announced August 2013.
-
Secondary Electron Yield Measurements of Fermilab's Main Injector Vacuum Vessel
Authors:
D. J. Scott,
D. Capista,
K. L. Duel,
R. M. Zwaska,
S. Greenwald,
W. Hartung,
Y. Li,
T. P. Moore,
M. A. Palmer,
R. Kirby,
M. Pivi,
L. Wang
Abstract:
We discuss the progress made on a new installation in Fermilab's Main Injector that will help investigate the electron cloud phenomenon by making direct measurements of the secondary electron yield (SEY) of samples irradiated in the accelerator. In the Project X upgrade the Main Injector will have its beam intensity increased by a factor of three compared to current operations. This may result in…
▽ More
We discuss the progress made on a new installation in Fermilab's Main Injector that will help investigate the electron cloud phenomenon by making direct measurements of the secondary electron yield (SEY) of samples irradiated in the accelerator. In the Project X upgrade the Main Injector will have its beam intensity increased by a factor of three compared to current operations. This may result in the beam being subject to instabilities from the electron cloud. Measured SEY values can be used to further constrain simulations and aid our extrapolation to Project X intensities. The SEY test-stand, developed in conjunction with Cornell and SLAC, is capable of measuring the SEY from samples using an incident electron beam when the samples are biased at different voltages. We present the design and manufacture of the test-stand and the results of initial laboratory tests on samples prior to installation.
△ Less
Submitted 29 January, 2013;
originally announced January 2013.
-
Niobium Quarter-Wave Resonator Development for The Rare Isotope Accelerator
Authors:
W. Hartung,
J. Bierwagen,
S. Bricker,
J. Colthorp,
C. Compton,
T. Grimm,
S. Hitchcock,
F. Marti,
L. Saxton,
R. C. York,
A. Facco,
V. Zviagintsev
Abstract:
Two superconducting quarter-wave resonator (QWR) prototypes have been fabricated and tested. They operate at 80.5 MHz and 161 MHz and are optimised for beta = 0.085 and beta = 0.16, respectively. The prototypes are simplified versions without integrated helium vessels. In the first RF tests, the beta = 0.085 QWR reached a peak surface electric field (Ep) in excess of 30 MV/m, with an intrinsic q…
▽ More
Two superconducting quarter-wave resonator (QWR) prototypes have been fabricated and tested. They operate at 80.5 MHz and 161 MHz and are optimised for beta = 0.085 and beta = 0.16, respectively. The prototypes are simplified versions without integrated helium vessels. In the first RF tests, the beta = 0.085 QWR reached a peak surface electric field (Ep) in excess of 30 MV/m, with an intrinsic quality factor (Q0) in excess of 1E9 at the design field of Ep = 20 MV/m. The beta = 0.16 QWR reached Ep = 20 MV/m with Q0 = 2.5E9. It is suspected that the performance of the latter cavity can be improved via better cooling of the Nb tuning plate and a better RF contact between the plate and the outer conductor.
△ Less
Submitted 4 December, 2004;
originally announced December 2004.
-
Status Report on Multi-Cell Superconducting Cavity Development for Medium-Velocity Beams
Authors:
W. Hartung,
C. C. Compton,
T. L. Grimm,
R. C. York,
G. Ciovati,
P. Kneisel
Abstract:
Three prototype 6-cell superconducting cavities for acceleration in the velocity range of 0.40 to 0.53 times the speed of light have been fabricated. The quality factor (Q) of the first prototype cavity was above 1E10 for accelerating gradients up to 11 MV/m. The highest gradient reached was about 16 MV/m; the Q was about 3E9 at the maximum gradient.
Three prototype 6-cell superconducting cavities for acceleration in the velocity range of 0.40 to 0.53 times the speed of light have been fabricated. The quality factor (Q) of the first prototype cavity was above 1E10 for accelerating gradients up to 11 MV/m. The highest gradient reached was about 16 MV/m; the Q was about 3E9 at the maximum gradient.
△ Less
Submitted 19 November, 2003;
originally announced November 2003.
-
Electro-Optic Sampling of Transient Fields from the passage of High-Charge Electron Bunches
Authors:
M. J. Fitch,
A. C. Melissinos,
P. L. Colestock,
J. -P. Carneiro,
H. T. Edwards,
W. H. Hartung
Abstract:
When a relativistic electron bunch traverses a structure, strong electric fields are induced in its wake. We present measurements of the electric field as a function of time as measured at a fixed location in the beam line. For a 12 nC bunch of duration 4.2 ps FWHM, the peak field is measured >0.5 MV/m. Time resolution of ~5 ps is achieved using electro-optic sampling with a lithium tantalate (L…
▽ More
When a relativistic electron bunch traverses a structure, strong electric fields are induced in its wake. We present measurements of the electric field as a function of time as measured at a fixed location in the beam line. For a 12 nC bunch of duration 4.2 ps FWHM, the peak field is measured >0.5 MV/m. Time resolution of ~5 ps is achieved using electro-optic sampling with a lithium tantalate (LiTaO_3) crystal and a short-pulse infrared laser synchronized to the beam. We present measurements under several different experimental conditions and discuss the influence of mode excitation in the structure.
△ Less
Submitted 20 August, 2000;
originally announced August 2000.
-
Compression of High-Charge Electron Bunches
Authors:
M. J. Fitch,
A. C. Melissinos,
N. Barov,
J. -P. Carneiro,
H. T. Edwards,
W. H. Hartung
Abstract:
The A0 Photoinjector at Fermilab can produce high charge (10-14 nC) electron bunches of low emittance (20 pi mm-mrad for 12 nC). We have undertaken a study of the optimal compression conditions. Off-crest acceleration in the 9-cell capture cavity induces an energy-time correlation, which is rotated by the compressor chicane (4 dipoles). The bunch length is measured using streak camera images of…
▽ More
The A0 Photoinjector at Fermilab can produce high charge (10-14 nC) electron bunches of low emittance (20 pi mm-mrad for 12 nC). We have undertaken a study of the optimal compression conditions. Off-crest acceleration in the 9-cell capture cavity induces an energy-time correlation, which is rotated by the compressor chicane (4 dipoles). The bunch length is measured using streak camera images of optical transition radiation. We present measurements under various conditions, including the effect of the laser pulse length (2 ps sigma Gaussian vs. 10 ps FWHM flat top). The best compression to date is for a 13.2 nC bunch with sigma = 0.63 mm (1.89 ps), which corresponds to a peak current of 2.8 kA.
△ Less
Submitted 20 August, 2000;
originally announced August 2000.
