-
Active oversight and quality control in standard Bayesian optimization for autonomous experiments
Authors:
Sumner B. Harris,
Rama Vasudevan,
Yongtao Liu
Abstract:
The fusion of experimental automation and machine learning has catalyzed a new era in materials research, prominently featuring Gaussian Process Bayesian Optimization (GPBO) driven autonomous experiments navigating complex experimental conditions for accelerated scientific discovery. In traditional GPBO-driven experiments, a predefined scalarizer function is often required to preprocess the experi…
▽ More
The fusion of experimental automation and machine learning has catalyzed a new era in materials research, prominently featuring Gaussian Process Bayesian Optimization (GPBO) driven autonomous experiments navigating complex experimental conditions for accelerated scientific discovery. In traditional GPBO-driven experiments, a predefined scalarizer function is often required to preprocess the experimental data, transforming non-scalar raw data into scalar descriptors for GP training. However, such predefined scalarizer functions have limitations, which likely fail to accommodate the diversity and complexity of real-world experimental data, potentially skewing experimental outcomes. Thus, oversight and quality control are necessitated over the process to avoid GPBO from being misled by low quality scalarizers. To address the limitation, we introduce a Dual-GP approach that enhances traditional GPBO by adding a secondary surrogate model to dynamically constrain the experimental space based on real-time assessments of the raw experimental data. This Dual-GP approach enhances the optimization efficiency of traditional GPBO by isolating more promising space for BO sampling and more valuable experimental data for primary GP training. We also incorporate a flexible, human-in-the-loop intervention method in the Dual-GP workflow to adjust for unanticipated results. We demonstrate the effectiveness of the Dual-GP model with synthetic model data and implement this approach in autonomous pulsed laser deposition experimental data. This Dual-GP approach has broad applicability in diverse GPBO-driven experimental settings, providing a more adaptable and precise framework for refining autonomous experimentation for more efficient optimization.
△ Less
Submitted 25 May, 2024;
originally announced May 2024.
-
Deep learning with plasma plume image sequences for anomaly detection and prediction of growth kinetics during pulsed laser deposition
Authors:
Sumner B. Harris,
Christopher M. Rouleau,
Kai Xiao,
Rama K. Vasudevan
Abstract:
Materials synthesis platforms that are designed for autonomous experimentation are capable of collecting multimodal diagnostic data that can be utilized for feedback to optimize material properties. Pulsed laser deposition (PLD) is emerging as a viable autonomous synthesis tool, and so the need arises to develop machine learning (ML) techniques that are capable of extracting information from in si…
▽ More
Materials synthesis platforms that are designed for autonomous experimentation are capable of collecting multimodal diagnostic data that can be utilized for feedback to optimize material properties. Pulsed laser deposition (PLD) is emerging as a viable autonomous synthesis tool, and so the need arises to develop machine learning (ML) techniques that are capable of extracting information from in situ diagnostics. Here, we demonstrate that intensified-CCD image sequences of the plasma plume generated during PLD can be used for anomaly detection and the prediction of thin film growth kinetics. We developed a multi-output (2$+$1)D convolutional neural network regression model that extracts deep features from plume dynamics that not only correlate with the measured chamber pressure and incident laser energy, but more importantly, predict parameters of an auto-catalytic film growth model derived from in situ laser reflectivity experiments. Our results are the first demonstration of how ML with in situ plume diagnostics data in PLD can be utilized to maintain deposition conditions in an optimal regime. Further, the predictive capabilities of plume dynamics on the kinetics of film growth or other film properties prior to deposition provides a means for rapid pre-screening of growth conditions for the non-expert, which promises to accelerate materials optimization with PLD.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Autonomous synthesis of thin film materials with pulsed laser deposition enabled by in situ spectroscopy and automation
Authors:
Sumner B. Harris,
Arpan Biswas,
Seok Joon Yun,
Christopher M. Rouleau,
Alexander A. Puretzky,
Rama K. Vasudevan,
David B. Geohegan,
Kai Xiao
Abstract:
Synthesis of thin films has traditionally relied upon slow, sequential processes carried out with substantial human intervention, frequently utilizing a mix of experience and serendipity to optimize material structure and properties. With recent advances in autonomous systems which combine synthesis, characterization, and decision making with artificial intelligence (AI), large parameter spaces ca…
▽ More
Synthesis of thin films has traditionally relied upon slow, sequential processes carried out with substantial human intervention, frequently utilizing a mix of experience and serendipity to optimize material structure and properties. With recent advances in autonomous systems which combine synthesis, characterization, and decision making with artificial intelligence (AI), large parameter spaces can be explored autonomously at rates beyond what is possible by human experimentalists, greatly accelerating discovery, optimization, and understanding in materials synthesis which directly address the grand challenges in synthesis science. Here, we demonstrate autonomous synthesis of a contemporary 2D material by combining the highly versatile pulsed laser deposition (PLD) technique with automation and machine learning (ML). We incorporated in situ and real-time spectroscopy, a high-throughput methodology, and cloud connectivity to enable autonomous synthesis workflows with PLD. Ultrathin WSe2 films were grown using co-ablation of two targets and showed a 10x increase in throughput over traditional PLD workflows. Gaussian process regression and Bayesian optimization were used with in situ Raman spectroscopy to autonomously discover two distinct growth windows and the process-property relationship after sampling only 0.25% of a large 4D parameter space. Any material that can be grown with PLD could be autonomously synthesized with our platform and workflows, enabling accelerated discovery and optimization of a vast number of materials.
△ Less
Submitted 16 August, 2023;
originally announced August 2023.
-
Machine learning the relationship between Debye temperature and superconducting transition temperature
Authors:
Adam D. Smith,
Sumner B. Harris,
Renato P. Camata,
Da Yan,
Cheng-Chien Chen
Abstract:
Recently a relationship between the Debye temperature $Θ_D$ and the superconducting transition temperature $T_c$ of conventional superconductors has been proposed [npj Quantum Materials $\mathbf{3}$, 59 (2018)]. The relationship indicates that $T_c \le A Θ_D$ for phonon-mediated BCS superconductors, with $A$ being a pre-factor of order $\sim 0.1$. In order to verify this bound, we train machine le…
▽ More
Recently a relationship between the Debye temperature $Θ_D$ and the superconducting transition temperature $T_c$ of conventional superconductors has been proposed [npj Quantum Materials $\mathbf{3}$, 59 (2018)]. The relationship indicates that $T_c \le A Θ_D$ for phonon-mediated BCS superconductors, with $A$ being a pre-factor of order $\sim 0.1$. In order to verify this bound, we train machine learning (ML) models with 10,330 samples in the Materials Project database to predict $Θ_D$. By applying our ML models to 9,860 known superconductors in the NIMS SuperCon database, we find that the conventional superconductors in the database indeed follow the proposed bound. We also perform first-principles phonon calculations for H$_{3}$S and LaH$_{10}$ at 200 GPa. The calculation results indicate that these high-pressure hydrides essentially saturate the bound of $T_c$ versus $Θ_D$.
△ Less
Submitted 27 November, 2023; v1 submitted 22 May, 2023;
originally announced May 2023.
-
Experimentally constrained multidimensional simulation of laser-generated plasmas and its application to UV nanosecond ablation of Se and Te
Authors:
Sumner B. Harris,
Jacob. H. Paiste,
Joseph Edoki,
Robert. R. Arslanbekov,
Renato P. Camata
Abstract:
We carry out simulations of laser plasmas generated during UV nanosecond pulsed laser ablation of the chalcogens selenium (Se) and tellurium (Te), and compare the results to experiments. We take advantage of a 2D-axisymmetric, adaptive Cartesian Mesh (ACM) framework that enables plume simulations out to centimeter distances over tens of microseconds. Our model and computational technique enable co…
▽ More
We carry out simulations of laser plasmas generated during UV nanosecond pulsed laser ablation of the chalcogens selenium (Se) and tellurium (Te), and compare the results to experiments. We take advantage of a 2D-axisymmetric, adaptive Cartesian Mesh (ACM) framework that enables plume simulations out to centimeter distances over tens of microseconds. Our model and computational technique enable comparison to laser-plasma applications where the long-term behavior of the plume is of primary interest, such as pulsed laser synthesis and modification of materials. An effective plasma absorption term is introduced in the model, allowing the simulation to be constrained by experimental time-of-flight kinetic energy distributions. We show that the effective simulation qualitatively captures the key characteristics of the observed laser plasma, including the effect of laser spot size. Predictions of full-scale experimentally-constrained Se and Te plasmas for 4.0 J/cm$^2$ laser fluence and 1.8 mm$^2$ circular laser spot area show distinct behavior compared to more commonly studied copper (Cu) plumes. The chalcogen plumes have spatial gradients of plasma density that are steeper than those for Cu by up to three orders of magnitude. Their spatial ion distributions have central bulges, in contrast to the edge-only ionization of Cu. For the irradiation conditions explored, the range of plasma temperatures for Se and Te is predicted to be higher than for Cu by more than 0.50 eV.
△ Less
Submitted 11 May, 2021; v1 submitted 16 March, 2021;
originally announced March 2021.
-
Geometrical and energy scaling in the pulsed laser deposition plasma during epitaxial growth of FeSe thin films
Authors:
Sumner B. Harris,
Kamron L. Kopekcy,
Chandler W. Cotton,
Renato P. Camata
Abstract:
Pulsed laser deposition (PLD) is a versatile technique for growing epitaxial heterostructures of a wide variety of novel materials combinations. Achieving low-defect layers with atomically sharp interfaces by PLD requires careful management of crystal growth conditions. Control over the flux of depositing particles, their kinetic energy, and the substrate temperature, is generally sufficient to ob…
▽ More
Pulsed laser deposition (PLD) is a versatile technique for growing epitaxial heterostructures of a wide variety of novel materials combinations. Achieving low-defect layers with atomically sharp interfaces by PLD requires careful management of crystal growth conditions. Control over the flux of depositing particles, their kinetic energy, and the substrate temperature, is generally sufficient to obtain high-quality single crystal epitaxy in vacuum. In this article, we show that measurements of plasma parameters such as the electron temperature, the electron density, and the Mach number of the plasma fluid expansion may provide additional insights into the tuning of the crystal growth and processing environment of PLD. We report Langmuir probe measurements during growth of FeSe thin films on (100)-oriented SrTiO$_3$. We discuss two distinct plasma regimes that are accessible by KrF laser ablation of FeSe when pulse energies in the 20-630 mJ range are used. The two regimes can be characterized by the relative number of photons to absorbing centers in the laser-plasma interaction volume. Thin films grown under the conditions created by these two distinct plasma regimes are analyzed by x-ray diffraction and x-ray reflectivity and their epitaxial configurations correlated to the PLD conditions associated with these plasmas.
△ Less
Submitted 11 May, 2021; v1 submitted 22 February, 2020;
originally announced February 2020.
-
Laser-generated plasmas in length scales relevant for thin film growth and processing: simulation and experiment
Authors:
Sumner B. Harris,
Jacob H. Paiste,
Tharon J. Holdsworth,
Robert R. Arslanbekov,
Renato P. Camata
Abstract:
In pulsed laser deposition, thin film growth is mediated by a laser-generated plasma, whose properties are critical for controlling the film microstructure. The advent of 2D materials has renewed the interest in how this ablation plasma can be used to manipulate the growth and processing of atomically thin systems. For such purpose, a quantitative understanding of the density, charge state, and ki…
▽ More
In pulsed laser deposition, thin film growth is mediated by a laser-generated plasma, whose properties are critical for controlling the film microstructure. The advent of 2D materials has renewed the interest in how this ablation plasma can be used to manipulate the growth and processing of atomically thin systems. For such purpose, a quantitative understanding of the density, charge state, and kinetic energy of plasma constituents is needed at the location where they contribute to materials processes. Here we study laser-induced plasmas over expansion distances of several centimeters from the ablation target, which is the relevant length scale for materials growth and modification. The study is enabled by a fast implementation of a laser ablation/plasma expansion model using an adaptive Cartesian mesh solver. Simulation outcomes for KrF excimer laser ablation of Cu are compared with Langmuir probe and optical emission spectroscopy measurements. Simulation predictions for the plasma-shielding threshold, the ionization state of species in the plasma, and the kinetic energy of ions, are in good correspondence with experimental data. For laser fluences of 1-4 J/cm$^2$, the plume is dominated by Cu$^0$, with small concentrations of Cu$^{+}$ and electrons at the expansion front. Higher laser fluences (e.g., 7 J/cm$^2$) lead to a Cu$^{+}$-rich plasma, with a fully ionized leading edge where Cu$^{2+}$ is the dominant species. In both regimes, simulations indicate the presence of a low-density, high-temperature plasma expansion front with a high degree of ionization that may play a significant role in do**, annealing, and kinetically-driven phase transformations in 2D materials.
△ Less
Submitted 20 September, 2019;
originally announced September 2019.
-
Double epitaxy of tetragonal and hexagonal phases in the FeSe system
Authors:
S. B. Harris,
R. P. Camata
Abstract:
Epitaxial films which contains more than one crystallographic orientation are of interest due to the possibility of altered magnetic, electrical, and optical properties. Thin films of FeSe have been grown on single-crystal MgO substrates under conditions that produces the simultaneous, epitaxial growth of tetragonal and hexagonal phases. We show that this double epitaxy is characterized by phase d…
▽ More
Epitaxial films which contains more than one crystallographic orientation are of interest due to the possibility of altered magnetic, electrical, and optical properties. Thin films of FeSe have been grown on single-crystal MgO substrates under conditions that produces the simultaneous, epitaxial growth of tetragonal and hexagonal phases. We show that this double epitaxy is characterized by phase domains with a well-defined epitaxial relationship to each other and that the relative phase fraction can be controlled. For growth temperatures of 350-450 degrees C, the (001)-oriented tetragonal phase ($β$-FeSe) grows with its unit cell aligned with the cubic substrate, while a (101)-oriented hexagonal phase (Fe$_7$Se$_8$) shows domains with two different in-plane orientations separated by 45 degrees. Additionally, the $β$-FeSe phase can be chosen to be (001)- or (101)-oriented with respect to the substrate, with the (101) orientation containing three rotated domains.
△ Less
Submitted 11 February, 2019; v1 submitted 9 February, 2019;
originally announced February 2019.
-
X-ray diffraction analysis to support phase identification in FeSe and Fe$_7$Se$_8$ epitaxial thin films
Authors:
Sumner B. Harris,
Renato P. Camata
Abstract:
X-ray diffraction (XRD) data and analysis for epitaxial iron selenide thin films grown by pulsed laser deposition (PLD) are presented. The films contain $β$-FeSe and Fe$_7$Se$_8$ phases in a double epitaxy configuration with the $β$-FeSe phase (001) oriented on the (001) MgO growth substrate. Fe$_7$Se$_8$ simultaneously takes on two different epitaxial orientations in certain growth conditions, ex…
▽ More
X-ray diffraction (XRD) data and analysis for epitaxial iron selenide thin films grown by pulsed laser deposition (PLD) are presented. The films contain $β$-FeSe and Fe$_7$Se$_8$ phases in a double epitaxy configuration with the $β$-FeSe phase (001) oriented on the (001) MgO growth substrate. Fe$_7$Se$_8$ simultaneously takes on two different epitaxial orientations in certain growth conditions, exhibiting both (101)- and (001)- orientations. Each of these orientations are verified with the presented XRD data. Additionally, XRD data used to determine the PLD target composition as well as mosaic structure of the $β$-FeSe phase are shown.
△ Less
Submitted 28 January, 2019;
originally announced January 2019.