-
Enhancing plasticity in high-entropy refractory ceramics via tailoring valence electron concentration
Authors:
Davide G. Sangiovanni,
William Mellor,
Tyler Harrington,
Kevin Kaufmann,
Kenneth Vecchio
Abstract:
Bottom-up design of high-entropy ceramics is a promising approach for realizing materials with unique combination of high hardness and fracture-resistance at elevated temperature. This work offers a simple yet fundamental design criterion - valence electron concentration (VEC) > ~9.5 e-/f.u. to populate bonding metallic states at the Fermi level - for selecting elemental compositions that may form…
▽ More
Bottom-up design of high-entropy ceramics is a promising approach for realizing materials with unique combination of high hardness and fracture-resistance at elevated temperature. This work offers a simple yet fundamental design criterion - valence electron concentration (VEC) > ~9.5 e-/f.u. to populate bonding metallic states at the Fermi level - for selecting elemental compositions that may form rocksalt-structure (B1) high-entropy ceramics with enhanced plasticity (reduced brittleness). Single-phase B1 (HfTaTiWZr)C and (MoNbTaVW)C, chosen as representative systems due to their specific VEC values, are here synthesized and tested. Nanoindentation arrays at various loads and depths statistically show that (HfTaTiWZr)C (VEC=8.6 e-/f.u.) is hard but brittle, whilst (MoNbTaVW)C (VEC=9.4 e-/f.u.) is hard and considerably more resistant to fracture than (HfTaTiWZr)C. Ab initio molecular dynamics simulations and electronic-structure analysis reveal that the improved fracture-resistance of (MoNbTaVW)C subject to tensile and shear deformation may originate from the intrinsic material's ability to undergo local lattice transformations beyond tensile yield points, as well as from relatively facile activation of lattice slip. Additional simulations, carried out to follow the evolution in mechanical properties as a function of temperature, suggest that (MoNbTaVW)C may retain good resistance to fracture up to ~900-1200K, whereas (HfTaTiWZr)C is predicted to remain brittle at all investigated temperatures.
△ Less
Submitted 11 March, 2021; v1 submitted 4 February, 2021;
originally announced February 2021.
-
Temperature-dependent elastic properties of binary and multicomponent high-entropy refractory carbides
Authors:
D. G. Sangiovanni,
F. Tasnádi,
T. Harrington,
K. S. Vecchio,
I. A. Abrikosov
Abstract:
Available information concerning the elastic moduli of refractory carbides at temperatures (T) of relevance for practical applications is sparse and/or inconsistent. We carry out ab initio molecular dynamics (AIMD) simulations at T = 300, 600, 900, and 1200 K to determine the temperature-dependences of the elastic constants of rocksalt-structure (B1) TiC, ZrC, HfC, VC, and TaC compounds as well as…
▽ More
Available information concerning the elastic moduli of refractory carbides at temperatures (T) of relevance for practical applications is sparse and/or inconsistent. We carry out ab initio molecular dynamics (AIMD) simulations at T = 300, 600, 900, and 1200 K to determine the temperature-dependences of the elastic constants of rocksalt-structure (B1) TiC, ZrC, HfC, VC, and TaC compounds as well as multicomponent high-entropy carbides (Ti,Zr,Hf,Ta,W)C and (V,Nb,Ta,Mo,W)C. The second order elastic constants are calculated by least-square fitting of the analytical expressions of stress vs. strain relationships to simulation results obtained from three tensile and three shear deformation modes. Moreover, we employ sound velocity measurements to evaluate the bulk, shear, elastic moduli and Poisson's ratios of single-phase B1 (Ti,Zr,Hf,Ta,W)C and (V,Nb,Ta,Mo,W)C at ambient conditions. Our experimental results are in excellent agreement with the values obtained by AIMD simulations. In comparison with the predictions of previous ab initio calculations - where the extrapolation of finite-temperature elastic properties accounted for thermal expansion while neglecting intrinsic vibrational effects - AIMD simulations produce a softening of elastic moduli with T in closer agreement with experiments. Results of our simulations show that TaC is the system which exhibits the highest elastic resistances to both tensile and shear deformation up to 1200 K, and identify the high-entropy (V,Nb,Ta,Mo,W)C system as candidate for applications that require good ductility and toughness at room as well as elevated temperatures.
△ Less
Submitted 5 November, 2020;
originally announced November 2020.
-
The LUX-ZEPLIN (LZ) radioactivity and cleanliness control programs
Authors:
D. S. Akerib,
C. W. Akerlof,
D. Yu. Akimov,
A. Alquahtani,
S. K. Alsum,
T. J. Anderson,
N. Angelides,
H. M. Araújo,
A. Arbuckle,
J. E. Armstrong,
M. Arthurs,
H. Auyeung,
S. Aviles,
X. Bai,
A. J. Bailey,
J. Balajthy,
S. Balashov,
J. Bang,
M. J. Barry,
D. Bauer,
P. Bauer,
A. Baxter,
J. Belle,
P. Beltrame,
J. Bensinger
, et al. (365 additional authors not shown)
Abstract:
LUX-ZEPLIN (LZ) is a second-generation direct dark matter experiment with spin-independent WIMP-nucleon scattering sensitivity above $1.4 \times 10^{-48}$ cm$^{2}$ for a WIMP mass of 40 GeV/c$^{2}$ and a 1000 d exposure. LZ achieves this sensitivity through a combination of a large 5.6 t fiducial volume, active inner and outer veto systems, and radio-pure construction using materials with inherent…
▽ More
LUX-ZEPLIN (LZ) is a second-generation direct dark matter experiment with spin-independent WIMP-nucleon scattering sensitivity above $1.4 \times 10^{-48}$ cm$^{2}$ for a WIMP mass of 40 GeV/c$^{2}$ and a 1000 d exposure. LZ achieves this sensitivity through a combination of a large 5.6 t fiducial volume, active inner and outer veto systems, and radio-pure construction using materials with inherently low radioactivity content. The LZ collaboration performed an extensive radioassay campaign over a period of six years to inform material selection for construction and provide an input to the experimental background model against which any possible signal excess may be evaluated. The campaign and its results are described in this paper. We present assays of dust and radon daughters depositing on the surface of components as well as cleanliness controls necessary to maintain background expectations through detector construction and assembly. Finally, examples from the campaign to highlight fixed contaminant radioassays for the LZ photomultiplier tubes, quality control and quality assurance procedures through fabrication, radon emanation measurements of major sub-systems, and bespoke detector systems to assay scintillator are presented.
△ Less
Submitted 28 February, 2022; v1 submitted 3 June, 2020;
originally announced June 2020.
-
Dual-Phase High-Entropy Ultra-High Temperature Ceramics
Authors:
Mingde Qin,
Joshua Gild,
Chongze Hu,
Haoren Wang,
Md Shafkat Bin Hoque,
Jeffrey L. Braun,
Tyler J. Harrington,
Patrick E. Hopkins,
Kenneth S. Vecchio,
Jian Luo
Abstract:
A series of dual-phase high-entropy ultrahigh temperature ceramics (DPHE-UHTCs) are fabricated starting from N binary borides and (5-N) binary carbides powders. >~99% relative densities have been achieved with virtually no native oxides. These DPHE-UHTCs consist of a hexagonal high-entropy boride (HEB) phase and a cubic high-entropy carbide (HEC) phase. A thermodynamic relation that governs the co…
▽ More
A series of dual-phase high-entropy ultrahigh temperature ceramics (DPHE-UHTCs) are fabricated starting from N binary borides and (5-N) binary carbides powders. >~99% relative densities have been achieved with virtually no native oxides. These DPHE-UHTCs consist of a hexagonal high-entropy boride (HEB) phase and a cubic high-entropy carbide (HEC) phase. A thermodynamic relation that governs the compositions of the HEB and HEC phases in equilibrium is discovered and a thermodynamic model is proposed. These DPHE-UHTCs exhibit tunable grain size, Vickers microhardness, Young' and shear moduli, and thermal conductivity. The DPHE-UHTCs have higher hardness than the weighted linear average of the two single-phase HEB and HEC, which are already harder than the rule-of-mixture averages of individual binary borides and carbides. This study extends the state of the art by introducing dual-phase high-entropy ceramics (DPHECs), which provide a new platform to tailor various properties via changing the phase fraction and microstructure.
△ Less
Submitted 21 May, 2020; v1 submitted 22 February, 2020;
originally announced February 2020.
-
Dissolving and Stabilizing Soft WB2 and MoB2 Phases into High-Entropy Borides via Boron-Metals Reactive Sintering to Attain Higher Hardness
Authors:
Mingde Qin,
Joshua Gild,
Haoren Wang,
Tyler Harrington,
Kenneth S. Vecchio,
Jian Luo
Abstract:
Five single-phase WB2- and MoB2-containing high-entropy borides (HEBs) have been made via reactive spark plasma sintering of elemental boron and metals. A large reactive driving force enables the full dissolution of 10-20 mol. % WB2 to form dense, single-phase HEBs, including (Ti0.2Zr0.2Hf0.2Mo0.2W0.2)B2, (Ti0.2Ta0.2Cr0.2Mo0.2W0.2)B2, (Zr0.2Hf0.2Nb0.2Ta0.2W0.2)B2, and (Zr0.225Hf0.225Ta0.225Mo0.225…
▽ More
Five single-phase WB2- and MoB2-containing high-entropy borides (HEBs) have been made via reactive spark plasma sintering of elemental boron and metals. A large reactive driving force enables the full dissolution of 10-20 mol. % WB2 to form dense, single-phase HEBs, including (Ti0.2Zr0.2Hf0.2Mo0.2W0.2)B2, (Ti0.2Ta0.2Cr0.2Mo0.2W0.2)B2, (Zr0.2Hf0.2Nb0.2Ta0.2W0.2)B2, and (Zr0.225Hf0.225Ta0.225Mo0.225W0.1)B2; the successful fabrication of such single-phase WB2-containing HEBs has not been reported before. In the processing science, this result serves perhaps the best example demonstrating that the phase formation in high-entropy ceramics can strongly depend on the kinetic route. A scientifically interesting finding is that HEBs containing softer WB2 and/or MoB2 components are significantly harder than (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)B2 (with harder binary boride components). This exemplifies that high-entropy ceramics can achieve unexpected properties.
△ Less
Submitted 14 May, 2020; v1 submitted 25 December, 2019;
originally announced December 2019.
-
The LUX-ZEPLIN (LZ) Experiment
Authors:
The LZ Collaboration,
D. S. Akerib,
C. W. Akerlof,
D. Yu. Akimov,
A. Alquahtani,
S. K. Alsum,
T. J. Anderson,
N. Angelides,
H. M. Araújo,
A. Arbuckle,
J. E. Armstrong,
M. Arthurs,
H. Auyeung,
X. Bai,
A. J. Bailey,
J. Balajthy,
S. Balashov,
J. Bang,
M. J. Barry,
J. Barthel,
D. Bauer,
P. Bauer,
A. Baxter,
J. Belle,
P. Beltrame
, et al. (357 additional authors not shown)
Abstract:
We describe the design and assembly of the LUX-ZEPLIN experiment, a direct detection search for cosmic WIMP dark matter particles. The centerpiece of the experiment is a large liquid xenon time projection chamber sensitive to low energy nuclear recoils. Rejection of backgrounds is enhanced by a Xe skin veto detector and by a liquid scintillator Outer Detector loaded with gadolinium for efficient n…
▽ More
We describe the design and assembly of the LUX-ZEPLIN experiment, a direct detection search for cosmic WIMP dark matter particles. The centerpiece of the experiment is a large liquid xenon time projection chamber sensitive to low energy nuclear recoils. Rejection of backgrounds is enhanced by a Xe skin veto detector and by a liquid scintillator Outer Detector loaded with gadolinium for efficient neutron capture and tagging. LZ is located in the Davis Cavern at the 4850' level of the Sanford Underground Research Facility in Lead, South Dakota, USA. We describe the major subsystems of the experiment and its key design features and requirements.
△ Less
Submitted 3 November, 2019; v1 submitted 20 October, 2019;
originally announced October 2019.
-
Design, Fabrication and Characterization of FeAl-based Metallic-Intermetallic Laminate (MIL) Composites
Authors:
Haoren Wang,
Tyler Harrington,
Chaoyi Zhu,
Kenneth S. Vecchio
Abstract:
FeAl-based MIL composites of various iron alloys were fabricated with an innovative 'multiple-thin-foil' configuration and 'two-stage reaction' strategy.
FeAl-based MIL composites of various iron alloys were fabricated with an innovative 'multiple-thin-foil' configuration and 'two-stage reaction' strategy.
△ Less
Submitted 27 March, 2019;
originally announced March 2019.
-
Paradigm shift in electron-based crystallography via machine learning
Authors:
Kevin Kaufmann,
Chaoyi Zhu,
Alexander S. Rosengarten,
Daniel Maryanovsky,
Tyler J. Harrington,
Eduardo Marin,
Kenneth S. Vecchio
Abstract:
Accurately determining the crystallographic structure of a material, organic or inorganic, is a critical primary step in material development and analysis. The most common practices involve analysis of diffraction patterns produced in laboratory XRD, TEM, and synchrotron X-ray sources. However, these techniques are slow, require careful sample preparation, can be difficult to access, and are prone…
▽ More
Accurately determining the crystallographic structure of a material, organic or inorganic, is a critical primary step in material development and analysis. The most common practices involve analysis of diffraction patterns produced in laboratory XRD, TEM, and synchrotron X-ray sources. However, these techniques are slow, require careful sample preparation, can be difficult to access, and are prone to human error during analysis. This paper presents a newly developed methodology that represents a paradigm change in electron diffraction-based structure analysis techniques, with the potential to revolutionize multiple crystallography-related fields. A machine learning-based approach for rapid and autonomous identification of the crystal structure of metals and alloys, ceramics, and geological specimens, without any prior knowledge of the sample, is presented and demonstrated utilizing the electron backscatter diffraction (EBSD) technique. Electron backscatter diffraction patterns are collected from materials with well-known crystal structures, then a deep neural network model is constructed for classification to a specific Bravais lattice or point group. The applicability of this approach is evaluated on diffraction patterns from samples unknown to the computer without any human input or data filtering. This is in comparison to traditional Hough transform EBSD, which requires that you have already determined the phases present in your sample. The internal operations of the neural network are elucidated through visualizing the symmetry features learned by the convolutional neural network. It is determined that the model looks for the same features a crystallographer would use, even though it is not explicitly programmed to do so. This study opens the door to fully automated, high-throughput determination of crystal structures via several electron-based diffraction techniques.
△ Less
Submitted 10 February, 2019;
originally announced February 2019.
-
A High-Entropy Silicide: (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Si2
Authors:
Joshua Gild,
Jeffrey Braun,
Kevin Kaufmann,
Eduardo Marin,
Tyler Harrington,
Patrick Hopkins,
Kenneth Vecchio,
Jian Luo
Abstract:
A high-entropy metal disilicide, (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Si2, has been successfully synthesized. X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), and electron backscatter diffraction (EBSD) collectively show the formation of a single high-entropy silicide phase. This high-entropy (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Si2 possesses a hexagonal C40 crystal structure with ABC stacking seque…
▽ More
A high-entropy metal disilicide, (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Si2, has been successfully synthesized. X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), and electron backscatter diffraction (EBSD) collectively show the formation of a single high-entropy silicide phase. This high-entropy (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Si2 possesses a hexagonal C40 crystal structure with ABC stacking sequence and a point group of P6222. This discovery expands the known families of high-entropy materials from metals, oxides, borides, carbides, and nitrides to a silicide, for the first time to our knowledge, as well as demonstrating that a new, non-cubic, crystal structure (with lower symmetry) can be made into high-entropy. This (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Si2 exhibits high nanohardness of 16.7 +- 1.9 GPa and Vickers hardness of 11.6 +- 0.5 GPa. Moreover, it has a low thermal conductivity of 6.9 +- 1.1 W m-1 K-1, which is approximately one order of magnitude lower than that of the widely-used tetragonal MoSi2 and ~1/3 of those reported values for the hexagonal NbSi2 and TaSi2 with the same crystal structure.
△ Less
Submitted 16 March, 2019; v1 submitted 4 February, 2019;
originally announced February 2019.
-
High-entropy high-hardness metal carbides discovered by entropy descriptors
Authors:
Pranab Sarker,
Tyler Harrington,
Cormac Toher,
Corey Oses,
Mojtaba Samiee,
Jon-Paul Maria,
Donald W. Brenner,
Kenneth S. Vecchio,
Stefano Curtarolo
Abstract:
High-entropy materials have attracted considerable interest due to the combination of useful properties and promising applications. Predicting their formation remains the major hindrance to the discovery of new systems. Here we propose a descriptor - entropy forming ability - for addressing synthesizability from first principles. The formalism, based on the energy distribution spectrum of randomiz…
▽ More
High-entropy materials have attracted considerable interest due to the combination of useful properties and promising applications. Predicting their formation remains the major hindrance to the discovery of new systems. Here we propose a descriptor - entropy forming ability - for addressing synthesizability from first principles. The formalism, based on the energy distribution spectrum of randomized calculations, captures the accessibility of equally-sampled states near the ground state and quantifies configurational disorder capable of stabilizing high-entropy homogeneous phases. The methodology is applied to disordered refractory 5-metal carbides - promising candidates for high-hardness applications. The descriptor correctly predicts the ease with which compositions can be experimentally synthesized as rock-salt high-entropy homogeneous phases, validating the ansatz, and in some cases, going beyond intuition. Several of these materials exhibit hardness up to 50% higher than rule of mixtures estimations. The entropy descriptor method has the potential to accelerate the search for high-entropy systems by rationally combining first principles with experimental synthesis and characterization.
△ Less
Submitted 19 November, 2018;
originally announced November 2018.
-
Heptagons from the Steinmann Cluster Bootstrap
Authors:
Lance J. Dixon,
James Drummond,
Thomas Harrington,
Andrew J. McLeod,
Georgios Papathanasiou,
Marcus Spradlin
Abstract:
We reformulate the heptagon cluster bootstrap to take advantage of the Steinmann relations, which require certain double discontinuities of any amplitude to vanish. These constraints vastly reduce the number of functions needed to bootstrap seven-point amplitudes in planar $\mathcal{N} = 4$ supersymmetric Yang-Mills theory, making higher-loop contributions to these amplitudes more computationally…
▽ More
We reformulate the heptagon cluster bootstrap to take advantage of the Steinmann relations, which require certain double discontinuities of any amplitude to vanish. These constraints vastly reduce the number of functions needed to bootstrap seven-point amplitudes in planar $\mathcal{N} = 4$ supersymmetric Yang-Mills theory, making higher-loop contributions to these amplitudes more computationally accessible. In particular, dual superconformal symmetry and well-defined collinear limits suffice to determine uniquely the symbols of the three-loop NMHV and four-loop MHV seven-point amplitudes. We also show that at three loops, relaxing the dual superconformal ($\bar{Q}$) relations and imposing dihedral symmetry (and for NMHV the absence of spurious poles) leaves only a single ambiguity in the heptagon amplitudes. These results point to a strong tension between the collinear properties of the amplitudes and the Steinmann relations.
△ Less
Submitted 28 February, 2017; v1 submitted 28 December, 2016;
originally announced December 2016.
-
Cluster Functions and Scattering Amplitudes for Six and Seven Points
Authors:
Thomas Harrington,
Marcus Spradlin
Abstract:
Scattering amplitudes in planar super-Yang-Mills theory satisfy several basic physical and mathematical constraints, including physical constraints on their branch cut structure and various empirically discovered connections to the mathematics of cluster algebras. The power of the bootstrap program for amplitudes is inversely proportional to the size of the intersection between these physical and…
▽ More
Scattering amplitudes in planar super-Yang-Mills theory satisfy several basic physical and mathematical constraints, including physical constraints on their branch cut structure and various empirically discovered connections to the mathematics of cluster algebras. The power of the bootstrap program for amplitudes is inversely proportional to the size of the intersection between these physical and mathematical constraints: ideally we would like a list of constraints which determine scattering amplitudes uniquely. We explore this intersection quantitatively for two-loop six- and seven-point amplitudes by providing a complete taxonomy of the Gr(4,6) and Gr(4,7) cluster polylogarithm functions of arXiv:1401.6446 at weight 4.
△ Less
Submitted 4 July, 2017; v1 submitted 24 December, 2015;
originally announced December 2015.
-
Effect of Size Dispersity On the Melting Transition
Authors:
M. Reza Sadr-Lahijany,
Purusattam Ray,
Stephen T. Harrington,
H. Eugene Stanley
Abstract:
We present a molecular dynamics simulation study of the liquid-solid transition in a two dimensional system consisting of particles of two different sizes interacting via a truncated Lennard-Jones potential. We work with equal number of particles of each kind and the dispersity $Δ$ in the sizes of the particles is varied by changing the ratio of the particle sizes only. For the monodisperse case…
▽ More
We present a molecular dynamics simulation study of the liquid-solid transition in a two dimensional system consisting of particles of two different sizes interacting via a truncated Lennard-Jones potential. We work with equal number of particles of each kind and the dispersity $Δ$ in the sizes of the particles is varied by changing the ratio of the particle sizes only. For the monodisperse case ($Δ= 0$) and for small values of $Δ$, we find a first order liquid-solid transition on increasing the volume fraction $ρ$ of the particles . As we increase $Δ$, the first-order transition coexistence region weakens gradually and completely disappears at high dispersities around $Δ= 0.10$ . At these values of dispersity the high density phase lacks long range translational order but possesses orientational order with a large but finite correlation length. The consequences of this effect of dispersity on the glass transition and on the melting transition in general are discussed.
△ Less
Submitted 5 March, 1997;
originally announced March 1997.
-
Interface Roughening in a Hydrodynamic Lattice-Gas Model with Surfactant
Authors:
Francis W. Starr,
Stephen T. Harrington,
Bruce M. Boghosian,
H. Eugene Stanley
Abstract:
Using a hydrodynamic lattice-gas model, we study interface growth in a binary fluid with various concentrations of surfactant. We find that the interface is smoothed by small concentrations of surfactant, while microemulsion droplets form for large surfactant concentrations. To assist in determining the stability limits of the interface, we calculate the change in the roughness and growth expone…
▽ More
Using a hydrodynamic lattice-gas model, we study interface growth in a binary fluid with various concentrations of surfactant. We find that the interface is smoothed by small concentrations of surfactant, while microemulsion droplets form for large surfactant concentrations. To assist in determining the stability limits of the interface, we calculate the change in the roughness and growth exponents $α$ and $β$ as a function of surfactant concentration along the interface.
△ Less
Submitted 20 September, 1996; v1 submitted 25 June, 1996;
originally announced June 1996.
-
Stochastic Model for Surface Erosion Via Ion-Sputtering: Dynamical Evolution from Ripple Morphology to Rough Morphology
Authors:
Rodolfo Cuerno,
Hernan A. Makse,
Silvina Tomassone,
Stephen T. Harrington,
H. E. Stanley
Abstract:
Surfaces eroded by ion-sputtering are sometimes observed to develop morphologies which are either ripple (periodic), or rough (non-periodic). We introduce a discrete stochastic model that allows us to interpret these experimental observations within a unified framework. We find that a periodic ripple morphology characterizes the initial stages of the evolution, whereas the surface displays self-…
▽ More
Surfaces eroded by ion-sputtering are sometimes observed to develop morphologies which are either ripple (periodic), or rough (non-periodic). We introduce a discrete stochastic model that allows us to interpret these experimental observations within a unified framework. We find that a periodic ripple morphology characterizes the initial stages of the evolution, whereas the surface displays self-affine scaling in the later time regime. Further, we argue that the stochastic continuum equation describing the surface height is a noisy version of the Kuramoto-Sivashinsky equation.
△ Less
Submitted 7 November, 1995;
originally announced November 1995.
-
Scaling in Late Stage Spinodal Decomposition with Quenched Disorder
Authors:
M. F. Gyure,
S. T. Harrington,
R. Strilka,
H. E. Stanley
Abstract:
We study the late stages of spinodal decomposition in a Ginzburg-Landau mean field model with quenched disorder. Random spatial dependence in the coupling constants is introduced to model the quenched disorder. The effect of the disorder on the scaling of the structure factor and on the domain growth is investigated in both the zero temperature limit and at finite temperature. In particular, we fi…
▽ More
We study the late stages of spinodal decomposition in a Ginzburg-Landau mean field model with quenched disorder. Random spatial dependence in the coupling constants is introduced to model the quenched disorder. The effect of the disorder on the scaling of the structure factor and on the domain growth is investigated in both the zero temperature limit and at finite temperature. In particular, we find that at zero temperature the domain size, $R(t)$, scales with the amplitude, $A$, of the quenched disorder as $R(t) = A^{-β} f(t/A^{-γ})$ with $β\simeq 1.0$ and $γ\simeq 3.0$ in two dimensions. We show that $β/γ= α$, where $α$ is the Lifshitz-Slyosov exponent. At finite temperature, this simple scaling is not observed and we suggest that the scaling also depends on temperature and $A$. We discuss these results in the context of Monte Carlo and cell dynamical models for phase separation in systems with quenched disorder, and propose that in a Monte Carlo simulation the concentration of impurities, $c$, is related to $A$ by $A \sim c^{1/d}$.
△ Less
Submitted 13 March, 1995;
originally announced March 1995.
-
Avalanches and the Directed Percolation Depinning Model: Experiments, Simulations and Theory
Authors:
L. A. N. Amaral,
A. -L. Barabasi,
S. V. Buldyrev,
S. T. Harrington,
S. Havlin,
R. Sadr-Lahijany,
H. E. Stanley
Abstract:
We study the recently-introduced directed percolation depinning (DPD) model for interface roughening with quenched disorder for which the interface becomes pinned by a directed percolation (DP) cluster for $d = 1$, or a directed surface (DS) for $d > 1$. The map** to DP enables us to predict some of the critical exponents of the growth process. For the case of $(1+1)$ dimensions, the theory pr…
▽ More
We study the recently-introduced directed percolation depinning (DPD) model for interface roughening with quenched disorder for which the interface becomes pinned by a directed percolation (DP) cluster for $d = 1$, or a directed surface (DS) for $d > 1$. The map** to DP enables us to predict some of the critical exponents of the growth process. For the case of $(1+1)$ dimensions, the theory predicts that the roughness exponent $α$ is given by $α= ν_{\perp} / ν_{\parallel}$, where $ν_{\perp}$ and $ν_{\parallel}$ are the exponents governing the divergence of perpendicular and parallel correlation lengths of the DP incipient infinite cluster. The theory also predicts that the dynamical exponent $z$ equals the exponent $d_{\rm min}$ characterizing the scaling of the shortest path on a isotropic percolation cluster. The exponent $α$ decreases monotonically with $d$ but does not seem to approach zero for any dimension calculated ($d \le 6$), suggesting that the DPD model has no upper critical dimension for the static exponents. On the other hand, $z$ appears to approach $2$ as $d \rightarrow 6$, as expected by the result $z = d_{\rm min}$, suggesting that $d_c = 6$ for the dynamics. We also perform a set of imbibition experiments, in both $(1+1)$ and $(2+1)$ dimensions, that can be used to test the DPD model. We find good agreement between experimental, theoretical and numerical approaches. Further, we study the properties of avalanches in the context of the DPD model. We relate the scaling properties of the avalanches in the DPD model to the scaling properties for the self-organized depinning (SOD) model, a variant of the DPD model. We calculate the exponent characterizing the avalanches distribution $τ_{\rm aval}$ for $d = 1$ to $d = 6$, and compare our results with recent theoretical
△ Less
Submitted 9 December, 1994;
originally announced December 1994.
-
Dynamics of Surface Roughening with Quenched Disorder
Authors:
S. Havlin,
L. A. N. Amaral,
S. V. Buldyrev,
S. T. Harrington,
H. E. Stanley
Abstract:
We study the dynamical exponent $z$ for the directed percolation depinning (DPD) class of models for surface roughening in the presence of quenched disorder. We argue that $z$ for $(d+1)$ dimensions is equal to the exponent $d_{\rm min}$ characterizing the shortest path between two sites in an isotropic percolation cluster in $d$ dimensions. To test the argument, we perform simulations and calcu…
▽ More
We study the dynamical exponent $z$ for the directed percolation depinning (DPD) class of models for surface roughening in the presence of quenched disorder. We argue that $z$ for $(d+1)$ dimensions is equal to the exponent $d_{\rm min}$ characterizing the shortest path between two sites in an isotropic percolation cluster in $d$ dimensions. To test the argument, we perform simulations and calculate $z$ for DPD, and $d_{\rm min}$ for percolation, from $d = 1$ to $d = 6$.
△ Less
Submitted 9 November, 1994;
originally announced November 1994.