-
Software and Firmware-logic Design for the PIP-II Machine Protection System Mode and Configuration Control at Fermilab
Authors:
L. Carmichael,
M. Austin,
J. Eisch,
E. Harms,
R. Neswold,
A. Prosser,
A. Warner,
J. Wu
Abstract:
The PIP-II Machine Protection System (MPS) requires a dedicated set of tools for configuration control and management of the machine modes and beam modes of the accelerator. The protection system reacts to signals from various elements of the machine according to rules established in a setup database in the form of a Look-Up-Table filtered by the program Mode Controller. This is achieved in accord…
▽ More
The PIP-II Machine Protection System (MPS) requires a dedicated set of tools for configuration control and management of the machine modes and beam modes of the accelerator. The protection system reacts to signals from various elements of the machine according to rules established in a setup database in the form of a Look-Up-Table filtered by the program Mode Controller. This is achieved in accordance with commands from the operator and governed by the firmware logic of the MPS. This paper describes the architecture, firmware logic, and implementation of the program mode controller.
△ Less
Submitted 31 January, 2024;
originally announced January 2024.
-
PIII Project Overview and Status
Authors:
R. Stanek,
C. Boffo,
S. Chandrasekaran,
S. Dixon,
E. Harms,
L. Kokoska,
I. Kourbanis,
J. Leibfritz,
O. Napoly,
D. Passarelli,
E. Pozdeyev,
A. Rowe
Abstract:
The Proton Improvement Plan II (PIP-II) project is an essential upgrade to Fermilab's particle accelerator complex to enable the world's most intense neutrino beam for LBNF/DUNE and a broad particle physics program for many decades to come. PIP-II will deliver 1.2 MW of proton beam power from the Main Injector, upgradeable to multi-MW capability. The central element of PIP-II is an 800 MeV superco…
▽ More
The Proton Improvement Plan II (PIP-II) project is an essential upgrade to Fermilab's particle accelerator complex to enable the world's most intense neutrino beam for LBNF/DUNE and a broad particle physics program for many decades to come. PIP-II will deliver 1.2 MW of proton beam power from the Main Injector, upgradeable to multi-MW capability. The central element of PIP-II is an 800 MeV superconducting radio frequency (SRF) linac, which comprises a room temperature front end followed by an SRF section. The SRF section consists of five different flavors of cavities/cryomodules, including Half Wave Resonators (HWR), Single Spoke and elliptical resonators operating at, or above, state-of-the-art parameters. The first two PIP-II cryomodules, Half Wave Resonator (HWR) and Single Spoke Resonator 1 (SSR1) were installed in the PIP-II Injector Test facility (PIP2IT) and have accelerated beam to above 17 MeV. PIP-II is the first U.S. accelerator project that will be constructed with significant contributions from international partners, including India, Italy, France, United Kingdom and Poland. The project was baselined in April 2022, and the construction phase is underway.
△ Less
Submitted 9 November, 2023;
originally announced November 2023.
-
Experience With Machine Protection Systems At PIP2IT
Authors:
PIP-II Collaboration,
:,
A. Warner,
M. Austin,
L. Carmichael,
J. -P. Carneiro,
B. Hanna,
E. Harms,
R. Neswold,
L. Prost,
R. Rivera,
A. Shemyakin,
M. Ibrahim,
J. Wu
Abstract:
The PIP-II Injector Test 1 PIP2IT facility accelerator was assembled in multiple stages in 2014 $-$ 2021 to test concepts and components of the future PIPII linac that is being constructed at Fermilab. In its final configuration, PIP2IT accelerated a 0.55 ms x 20 Hz x 2 mA H$-$ beam to 16 MeV. To protect elements of the beam line, a Machine Protection System MPS was implemented and commissioned. T…
▽ More
The PIP-II Injector Test 1 PIP2IT facility accelerator was assembled in multiple stages in 2014 $-$ 2021 to test concepts and components of the future PIPII linac that is being constructed at Fermilab. In its final configuration, PIP2IT accelerated a 0.55 ms x 20 Hz x 2 mA H$-$ beam to 16 MeV. To protect elements of the beam line, a Machine Protection System MPS was implemented and commissioned. The beam was interrupted faster than 10$μ$s when excessive beam loss was detected. The paper describes the MPS architecture, methods of the loss detection, procedure of the beam interruption, and operational experience at PIP2IT.
△ Less
Submitted 8 September, 2022; v1 submitted 2 September, 2022;
originally announced September 2022.
-
LCLS-II and HE Cryomodule Microphonics at CMTF in Fermilab*
Authors:
C. Contreras-Martinez,
E. Harms,
C. Cravatta,
J. Holzbauer,
S. Posen,
L. Doolittle,
B. Chase,
J. Einstein-Curtis,
J. Makara,
R. Wang
Abstract:
Microphonics causes the cavity to detune. This study discusses the microphonics of sixteen 1.3 GHz cryomodules, 14 for LCLS-II and 2 for LCLS-II HE tested at CMTF. The peak detuning, as well as the RMS detuning for each cryomodule, will be discussed. For each cryomodule, the data was taken with enough soaking time to prevent any thermalization effects which can show up in the detuning. Each data c…
▽ More
Microphonics causes the cavity to detune. This study discusses the microphonics of sixteen 1.3 GHz cryomodules, 14 for LCLS-II and 2 for LCLS-II HE tested at CMTF. The peak detuning, as well as the RMS detuning for each cryomodule, will be discussed. For each cryomodule, the data was taken with enough soaking time to prevent any thermalization effects which can show up in the detuning. Each data capture taken was 30 minutes or longer and sampled at 1 kHz.
△ Less
Submitted 12 August, 2022;
originally announced August 2022.
-
LCLS-II-HE verification cryomodule high gradient performance and quench behavior
Authors:
S. Posen,
A. Cravatta,
M. Checchin,
S. Aderhold,
C. Adolphsen,
T. Arkan,
D. Bafia,
A. Benwell,
D. Bice,
B. Chase,
C. Contreras-Martinez,
L. Dootlittle,
J. Fuerst,
D. Gonnella,
A. Grassellino,
C. Grimm,
B. Hansen,
E. Harms,
B. Hartsell,
G. Hays,
J. Holzbauer,
S. Hoobler,
J. Kaluzny,
T. Khabiboulline,
M. Kucera
, et al. (21 additional authors not shown)
Abstract:
An 8-cavity, 1.3 GHz, LCLS-II-HE cryomodule was assembled and tested at Fermilab to verify performance before the start of production. Its cavities were processed with a novel nitrogen do** treatment to improve gradient performance. The cryomodule was tested with a modified protocol to process sporadic quenches, which were observed in LCLS-II production cryomodules and are attributed to multipac…
▽ More
An 8-cavity, 1.3 GHz, LCLS-II-HE cryomodule was assembled and tested at Fermilab to verify performance before the start of production. Its cavities were processed with a novel nitrogen do** treatment to improve gradient performance. The cryomodule was tested with a modified protocol to process sporadic quenches, which were observed in LCLS-II production cryomodules and are attributed to multipacting. Dedicated vertical test experiments support the attribution to multipacting. The verification cryomodule achieved an acceleration voltage of 200 MV in continuous wave mode, corresponding to an average accelerating gradient of 24.1 MV/m, significantly exceeding the specification of 173 MV. The average Q0 (3.0x10^10) also exceeded its specification (2.7x10^10). After processing, no field emission was observed up to the maximum gradient of each cavity. This paper reviews the cryomodule performance and discusses operational issues and mitigations implemented during the several month program.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Upgrade of the ILC cryomodule
Authors:
A. Basti,
F. Bedeschi,
A. Bryzgalin,
J. Budagov,
P. Fabbricatore,
E. Harms,
S. Illarionov,
S. Nagaitsev,
E. Pekar,
V. Rybakov,
B. Sabirov,
Ju. Samarokov,
W. Soyars,
Ju. Taran,
G. Trubnikov
Abstract:
Results of testing modified components for the cryomodule of the International Linear Collider (ILC) are summarized. To reduce the ILC project cost, it is proposed to replace titanium cryomodule components with stainless steel (SS) ones. New bimetallic transitions Ti_SS, Nb_SS have been produced by a unique method based on explosion welding. Successive upgrading of these components to the latest v…
▽ More
Results of testing modified components for the cryomodule of the International Linear Collider (ILC) are summarized. To reduce the ILC project cost, it is proposed to replace titanium cryomodule components with stainless steel (SS) ones. New bimetallic transitions Ti_SS, Nb_SS have been produced by a unique method based on explosion welding. Successive upgrading of these components to the latest version of the Nb/Ti/SS transition element has led to improvement of the ILC cryomodule. This new component resolves problems of residual stress, and its specific design prevents the possibility of a shift due to the difference in the linear expansion coefficients of the constituent metals. Leak tests with the He gas revealed no leaks at the background rate of 0.2x10-10atmxcc-1s. The test results are very encouraging. The up-to-date design of trimetallic Nb_Ti_SS element promises technologically simpler and less expensive manufacture. Investigations have shown that explosion welding allows unique trimetallic components to be made not only for cryogenic units of accelerators but also for laboratory equipment and for general engineering applications.
△ Less
Submitted 13 April, 2020;
originally announced April 2020.
-
Factorization and resummation: A new paradigm to improve gravitational wave amplitudes. III: the spinning test-body terms
Authors:
Alessandro Nagar,
Francesco Messina,
Chris Kavanagh,
Georgios Lukes-Gerakopoulos,
Niels Warburton,
Sebastiano Bernuzzi,
Enno Harms
Abstract:
We present new calculations of the energy flux of a spinning test-body on circular orbits around a Schwarzschild black hole at linear order in the particle spin. We compute the multipolar fluxes up to $\ell=m=6$ using two independent numerical solvers of theTeukolsky equation, one in the time domain and the other in the frequency domain. After linearization in the spin of the particle, we obtain a…
▽ More
We present new calculations of the energy flux of a spinning test-body on circular orbits around a Schwarzschild black hole at linear order in the particle spin. We compute the multipolar fluxes up to $\ell=m=6$ using two independent numerical solvers of theTeukolsky equation, one in the time domain and the other in the frequency domain. After linearization in the spin of the particle, we obtain an excellent agreement ($\sim 10^{-5}$) between the two numerical results.The calculation of the multipolar fluxes is also performed analytically (up to $\ell=7$) using the post-Newtonian (PN) expansion of the Teukolsky equation solution; each mode is obtained at 5.5PN order beyond the corresponding leading-order contribution. From the analytical fluxes we obtain the PN-expanded analytical waveform amplitudes. These quantities are then resummed using new procedures either based on the factorization of the orbital contribution (and resumming it independently from the spin-dependent factor) or on the factorization of the tail contribution solely for odd-parity multipoles. We compare these prescriptions and the resummation procedure proposed in Pan et al. [Phys. Rev. D 83 (2011) 064003] to the numerical data. We find that the new procedures significantly improve over the existing one that, notably, is inconsistent with the numerical data for $\ell+m=\text{odd}$ multipoles already at low orbital frequencies. Our study suggests that the approach to waveform resummation used in current effective-one-body-based waveform models should be modified to improve its robustness and accuracy all over the binary parameter space.
△ Less
Submitted 30 July, 2019; v1 submitted 29 July, 2019;
originally announced July 2019.
-
Achievement of Ultra-High Quality Factor in Prototype Cryomodule for LCLS-II
Authors:
G. Wu,
A. Grassellino,
E. Harms,
N. Solyak,
A. Romanenko,
C. Ginsburg,
R. Stanek
Abstract:
Quality factor is a primary cost driver for high energy, continuous wave (CW) SRF linacs like the LCLS-II X-ray free electron laser currently under construction. Taking this into account, several innovations were introduced in the LCLS-II cryomodule design to push substantially beyond the previous state-of-the-art quality factor achieved in operation. This includes the first ever implementation of…
▽ More
Quality factor is a primary cost driver for high energy, continuous wave (CW) SRF linacs like the LCLS-II X-ray free electron laser currently under construction. Taking this into account, several innovations were introduced in the LCLS-II cryomodule design to push substantially beyond the previous state-of-the-art quality factor achieved in operation. This includes the first ever implementation of the nitrogen do** cavity treatment, the capability to provide high mass flow cooldown to improve expulsion of magnetic flux based on recent R&D, high performance magnetic shielding, and other critical subcomponents. To evaluate the implementation of these new cryomodule features, two prototype cryomodules were produced. In this paper, we present results from the prototype cryomodule assembled at Fermilab, which achieved unprecedented cavity quality factors of 3.0e10 at a nominal cryomodule voltage. We overview cavity performance, procedures to achieve ambient magnetic field < 5 mG at the cavity wall, and the successful demonstration of high mass flow cooldown in a cryomodule. The cavity performance under various cool down conditions are presented as well to show the impact of flux expulsion on Q0.
△ Less
Submitted 8 January, 2019; v1 submitted 21 December, 2018;
originally announced December 2018.
-
The Role of Magnetic Flux Expulsion to Reach Q0>3x10^10 in SRF Cryomodules
Authors:
S. Posen,
G. Wu,
E. Harms,
A. Grassellino,
O. S. Melnychuk,
D. A. Sergatskov,
N. Solyak,
A. Palczewski,
D. Gonnella,
T. Peterson
Abstract:
When a superconducting radiofrequency cavity is cooled through its critical temperature, ambient magnetic flux can become "frozen in" to the superconductor, resulting in degradation of the quality factor. This is especially problematic in applications where quality factor is a cost driver, such as in the CW linac for LCLS-II. Previously, it had been unknown how to prevent flux from being trapped d…
▽ More
When a superconducting radiofrequency cavity is cooled through its critical temperature, ambient magnetic flux can become "frozen in" to the superconductor, resulting in degradation of the quality factor. This is especially problematic in applications where quality factor is a cost driver, such as in the CW linac for LCLS-II. Previously, it had been unknown how to prevent flux from being trapped during cooldown in bulk niobium cavities, but recent R&D studies showed near-full flux expulsion can be achieved through high temperature heat treatment and cooling cavities through the superconducting transition with a spatial thermal gradient over the surface. In this paper, we describe the first accelerator implementation of these procedures, in cryomodules that are currently being produced for LCLS-II. We compare the performance of cavities under different conditions of heat treatment and thermal gradient during cooldown, showing a substantial improvement in performance when both are applied, enabling cryomodules to reach and, in many cases, exceed a Q0 of ~3x10^10.
△ Less
Submitted 10 December, 2018;
originally announced December 2018.
-
Commissioning and Operation of FAST Electron Linac at Fermilab
Authors:
A. Romanov,
C. Baffes,
D. R. Broemmelsiek,
K. Carlson,
D. J. Crawford,
N. Eddy,
D. Edstrom Jr.,
E. R. Harms,
J. Hurd,
M. Kucera,
J. Leibfritz,
I. Rakhno,
J. Reid,
J. Ruan,
J. Santucci,
V. Shiltsev,
G. Stancari,
R. Thurman-Keup,
A. Valishev,
A. Warner
Abstract:
We report results of the beam commissioning and first operation of the 1.3 GHz superconducting RF electron linear accelerator at Fermilab Accelerator Science and Technology (FAST) facility. Construction of the linac was completed and the machine was commissioned with beam in 2017. The maximum total beam energy of about 300 MeV was achieved with the record energy gain of 250 MeV in the ILC-type SRF…
▽ More
We report results of the beam commissioning and first operation of the 1.3 GHz superconducting RF electron linear accelerator at Fermilab Accelerator Science and Technology (FAST) facility. Construction of the linac was completed and the machine was commissioned with beam in 2017. The maximum total beam energy of about 300 MeV was achieved with the record energy gain of 250 MeV in the ILC-type SRF cryomodule. The photoinjector was tuned to produce trains of 200 pC bunches with a frequency of 3 MHz at a repetition rate of 1 Hz. This report describes the aspects of machine commissioning such as tuning of the SRF cryomodule and beam optics optimization. We also present highlights of an experimental program carried out parasitically during the two-month run, including studies of wake-fields, and advanced beam phase space manipulation.
△ Less
Submitted 9 November, 2018;
originally announced November 2018.
-
Record High-Gradient SRF Beam Acceleration at Fermilab
Authors:
Daniel Broemmelsiek,
Brian Chase,
Dean Edstrom,
Elvin Harms,
Jerry Leibfritz,
Sergei Nagaitsev,
Yuri Pischalnikov,
Alexander Romanov,
**hao Ruan,
Warren Schappert,
Vladimir Shiltsev,
Randy Thurman-Keup,
Alexander Valishev
Abstract:
Many modern and future particle accelerators employ high gradient superconducting RF (SRF) to generate beams of high energy, high intensity and high brightness for research in high energy and nuclear physics, basic energy sciences, etc. In this paper we report the record performance large-scale SRF system with average beam accelerating gradient matching the ILC specification of 31.5MV/m. Design of…
▽ More
Many modern and future particle accelerators employ high gradient superconducting RF (SRF) to generate beams of high energy, high intensity and high brightness for research in high energy and nuclear physics, basic energy sciences, etc. In this paper we report the record performance large-scale SRF system with average beam accelerating gradient matching the ILC specification of 31.5MV/m. Design of the eight cavity 1.3 GHz SRF cryomodule, its performance without the beam and results of the system commissioning with high intensity electron beam at FAST (Fermilab Accelerator Science and Technology) facility are presented. We also briefly discuss opportunities for further beam studies and tests at FAST including those on even higher gradient and more efficient SRF acceleration.
△ Less
Submitted 9 August, 2018;
originally announced August 2018.
-
Commissioning And First Results From The Fermilab Cryomodule Test Stand
Authors:
E. R. Harms,
M. Awida,
C. Baffes,
K. Carlson,
S. Chandrasekaran,
B. Chase,
E. Cullerton,
J. Edelen,
J. Einstein-Curtis,
C. Ginsburg,
A. Grassellino,
B. Hansen,
J. Holzbauer,
S. Kazakov,
T. Khabiboulline,
M. Kucera,
J. Leibfritz,
A. Lunin,
D. McDowell,
M. McGee,
D. Nicklaus,
D. Orris,
J. Ozelis,
J. Patrick,
T. Petersen
, et al. (12 additional authors not shown)
Abstract:
A new test stand dedicated to Superconducting Radiofrequency (SRF) cryomodule testing, CMTS1, has been commissioned and is now in operation at Fermilab. The first device to be cooled down and powered in this facility is the prototype 1.3 GHz cryomodule assembled at Fermilab for LCLS-II. We describe the demonstrated capabilities of CMTS1, report on steps taken during commissioning, provide an overv…
▽ More
A new test stand dedicated to Superconducting Radiofrequency (SRF) cryomodule testing, CMTS1, has been commissioned and is now in operation at Fermilab. The first device to be cooled down and powered in this facility is the prototype 1.3 GHz cryomodule assembled at Fermilab for LCLS-II. We describe the demonstrated capabilities of CMTS1, report on steps taken during commissioning, provide an overview of first test results, and survey future plans.
△ Less
Submitted 7 May, 2018;
originally announced May 2018.
-
Spinning test-body orbiting around a Kerr black hole: circular dynamics and gravitational-wave fluxes
Authors:
Georgios Lukes-Gerakopoulos,
Enno Harms,
Sebastiano Bernuzzi,
Alessandro Nagar
Abstract:
In a recent work, [Phys. Rev. D. 94, 104010 (2016)], hereafter Paper I, we have numerically studied different prescriptions for the dynamics of a spinning particle in circular motion around a Schwarzschild black hole. In the present work, we continue this line of investigation to the rotating Kerr black hole. We consider the Mathisson-Papapetrou formalism under three different spin-supplementary-c…
▽ More
In a recent work, [Phys. Rev. D. 94, 104010 (2016)], hereafter Paper I, we have numerically studied different prescriptions for the dynamics of a spinning particle in circular motion around a Schwarzschild black hole. In the present work, we continue this line of investigation to the rotating Kerr black hole. We consider the Mathisson-Papapetrou formalism under three different spin-supplementary-conditions (SSC), the Tulczyjew SSC, the Pirani SSC and the Ohashi-Kyrian-Semerak SSC, and analyze the different circular dynamics in terms of the ISCO shifts and the frequency parameter ${x \equiv (M Ω)^{2/3}}$, where $Ω$ is the orbital frequency and $M$ is the Kerr black hole mass. Then, we solve numerically the inhomogeneous $(2+1)D$ Teukolsky equation to contrast the asymptotic gravitational wave fluxes for the three cases. Our central observation made in Paper I for the Schwarzschild limit is found to hold true for the Kerr background: the three SSCs reduce to the same circular dynamics and the same radiation fluxes for small frequency parameters but differences arise as $x$ grows close to the ISCO. For a positive Kerr parameter $a=0.9$ the energy fluxes mutually agree with each other within a $0.2\%$ uncertainty up to $x<0.14$, while for $a=-0.9$ this level of agreement is preserved up to $x<0.1$. For large frequencies ($x \gtrsim 0.1$), however, the spin coupling of the Kerr black hole and the spinning body results in significant differences of the circular orbit parameters and the fluxes, especially for the $a=-0.9$ case. Instead, in the study of ISCO the negative Kerr parameter $a=-0.9$ results in less discrepancies in comparison with the positive Kerr parameter $a=0.9$.
△ Less
Submitted 24 July, 2017;
originally announced July 2017.
-
Cryomodule Test Stand Reduced-Magnetic Support Design At Fermilab
Authors:
M. W. McGee,
S. K. Chandrasekaran,
A. C. Crawford,
E. Harms,
J. Leibfritz,
G. Wu
Abstract:
In a partnership with SLAC National Accelerator Laboratory (SLAC) and Jefferson Lab, Fermilab will assemble and test 17 of the 35 total 1.3 GHz cryomodules for the Linac Coherent Light Source II (LCLS-II) Project. These devices will be tested at Fermilab's Cryomodule Test Facility (CMTF) within the Cryomodule Test Stand (CMTS-1) cave. The problem of magnetic pollution became one of major issues du…
▽ More
In a partnership with SLAC National Accelerator Laboratory (SLAC) and Jefferson Lab, Fermilab will assemble and test 17 of the 35 total 1.3 GHz cryomodules for the Linac Coherent Light Source II (LCLS-II) Project. These devices will be tested at Fermilab's Cryomodule Test Facility (CMTF) within the Cryomodule Test Stand (CMTS-1) cave. The problem of magnetic pollution became one of major issues during design stage of the LCLS-II cryomodule as the average quality factor of the accelerating cavities is specified to be $2.7 \times 10^{10}$. One of the possible ways to mitigate the effect of stray magnetic fields and to keep it below the goal of 5 mGauss involves the application of low permeable materials. Initial permeability and magnetic measurement studies regarding the use of 316L stainless steel material indicated that cold work (machining) and heat affected zones from welding would be acceptable.
△ Less
Submitted 25 April, 2017;
originally announced April 2017.
-
Analysis and Measurement of the Transfer Matrix of a 9-cell 1.3-GHz Superconducting Cavity
Authors:
A. Halavanau,
N. Eddy,
D. Edstrom,
E. Harms,
A. Lunin,
P. Piot,
A. Romanov,
J. Ruan,
N. Solyak,
V. Shiltsev
Abstract:
Superconducting linacs are capable of producing intense, stable, high-quality electron beams that have found widespread applications in science and industry. The 9-cell 1.3-GHz superconducting standing-wave accelerating RF cavity originally developed for $e^+/e^-$ linear-collider applications [B. Aunes, {\em et al.} Phys. Rev. ST Accel. Beams {\bf 3}, 092001 (2000)] has been broadly employed in va…
▽ More
Superconducting linacs are capable of producing intense, stable, high-quality electron beams that have found widespread applications in science and industry. The 9-cell 1.3-GHz superconducting standing-wave accelerating RF cavity originally developed for $e^+/e^-$ linear-collider applications [B. Aunes, {\em et al.} Phys. Rev. ST Accel. Beams {\bf 3}, 092001 (2000)] has been broadly employed in various superconducting-linac designs. In this paper we discuss the transfer matrix of such a cavity and present its measurement performed at the Fermilab Accelerator Science and Technology (FAST) facility. The experimental results are found to be in agreement with analytical calculations and numerical simulations.
△ Less
Submitted 22 April, 2017; v1 submitted 27 January, 2017;
originally announced January 2017.
-
The most powerful astrophysical events: Gravitational-wave peak luminosity of binary black holes as predicted by numerical relativity
Authors:
David Keitel,
Xisco Jiménez Forteza,
Sascha Husa,
Lionel London,
Alessandro Nagar,
Sebastiano Bernuzzi,
Enno Harms,
Mark Hannam,
Sebastian Khan,
Michael Pürrer,
Geraint Pratten,
Vivek Chaurasia
Abstract:
For a brief moment, a binary black hole (BBH) merger can be the most powerful astrophysical event in the visible universe. Here we present a model fit for this gravitational-wave peak luminosity of nonprecessing quasicircular BBH systems as a function of the masses and spins of the component black holes, based on numerical relativity (NR) simulations and the hierarchical fitting approach introduce…
▽ More
For a brief moment, a binary black hole (BBH) merger can be the most powerful astrophysical event in the visible universe. Here we present a model fit for this gravitational-wave peak luminosity of nonprecessing quasicircular BBH systems as a function of the masses and spins of the component black holes, based on numerical relativity (NR) simulations and the hierarchical fitting approach introduced by X. Jiménez-Forteza et al. [Phys. Rev. D 95, 064024 (2017), arXiv:1611.00332]. This fit improves over previous results in accuracy and parameter-space coverage and can be used to infer posterior distributions for the peak luminosity of future astrophysical signals like GW150914 and GW151226. The model is calibrated to the l<=6 modes of 378 nonprecessing NR simulations up to mass ratios of 18 and dimensionless spin magnitudes up to 0.995, and includes unequal-spin effects. We also constrain the fit to perturbative numerical results for large mass ratios. Studies of key contributions to the uncertainty in NR peak luminosities, such as (i) mode selection, (ii) finite resolution, (iii) finite extraction radius, and (iv) different methods for converting NR waveforms to luminosity, allow us to use NR simulations from four different codes as a homogeneous calibration set. This study of systematic fits to combined NR and large-mass-ratio data, including higher modes, also paves the way for improved inspiral-merger-ringdown waveform models.
△ Less
Submitted 18 July, 2017; v1 submitted 30 December, 2016;
originally announced December 2016.
-
IOTA (Integrable Optics Test Accelerator): Facility and Experimental Beam Physics Program
Authors:
Sergei Antipov,
Daniel Broemmelsiek,
David Bruhwiler,
Dean Edstrom,
Elvin Harms,
Valery Lebedev,
Jerry Leibfritz,
Sergei Nagaitsev,
Chong-Shik Park,
Henryk Piekarz,
Philippe Piot,
Eric Prebys,
Alexander Romanov,
**hao Ruan,
Tanaji Sen,
Giulio Stancari,
Charles Thangaraj,
Randy Thurman-Keup,
Alexander Valishev,
Vladimir Shiltsev
Abstract:
The Integrable Optics Test Accelerator (IOTA) is a storage ring for advanced beam physics research currently being built and commissioned at Fermilab. It will operate with protons and electrons using injectors with momenta of 70 and 150 MeV/c, respectively. The research program includes the study of nonlinear focusing integrable optical beam lattices based on special magnets and electron lenses, b…
▽ More
The Integrable Optics Test Accelerator (IOTA) is a storage ring for advanced beam physics research currently being built and commissioned at Fermilab. It will operate with protons and electrons using injectors with momenta of 70 and 150 MeV/c, respectively. The research program includes the study of nonlinear focusing integrable optical beam lattices based on special magnets and electron lenses, beam dynamics of space-charge effects and their compensation, optical stochastic cooling, and several other experiments. In this article, we present the design and main parameters of the facility, outline progress to date and provide the timeline of the construction, commissioning and research. The physical principles, design, and hardware implementation plans for the major IOTA experiments are also discussed.
△ Less
Submitted 19 December, 2016;
originally announced December 2016.
-
The evolution of hyperboloidal data with the dual foliation formalism: Mathematical analysis and wave equation tests
Authors:
David Hilditch,
Enno Harms,
Marcus Bugner,
Hannes Rueter,
Bernd Bruegmann
Abstract:
A long-standing problem in numerical relativity is the satisfactory treatment of future null-infinity. We propose an approach for the evolution of hyperboloidal initial data in which the outer boundary of the computational domain is placed at infinity. The main idea is to apply the `dual foliation' formalism in combination with hyperboloidal coordinates and the generalized harmonic gauge formulati…
▽ More
A long-standing problem in numerical relativity is the satisfactory treatment of future null-infinity. We propose an approach for the evolution of hyperboloidal initial data in which the outer boundary of the computational domain is placed at infinity. The main idea is to apply the `dual foliation' formalism in combination with hyperboloidal coordinates and the generalized harmonic gauge formulation. The strength of the present approach is that, following the ideas of Zenginoglu, a hyperboloidal layer can be naturally attached to a central region using standard coordinates of numerical relativity applications. Employing a generalization of the standard hyperboloidal slices, developed by Calabrese et. al., we find that all formally singular terms take a trivial limit as we head to null-infinity. A byproduct is a numerical approach for hyperboloidal evolution of nonlinear wave equations violating the null-condition. The height-function method, used often for fixed background spacetimes, is generalized in such a way that the slices can be dynamically `waggled' to maintain the desired outgoing coordinate lightspeed precisely. This is achieved by dynamically solving the eikonal equation. As a first numerical test of the new approach we solve the 3D flat space scalar wave equation. The simulations, performed with the pseudospectral bamps code, show that outgoing waves are cleanly absorbed at null-infinity and that errors converge away rapidly as resolution is increased.
△ Less
Submitted 28 September, 2016;
originally announced September 2016.
-
Spinning test-body orbiting around Schwarzschild black hole: circular dynamics and gravitational-wave fluxes
Authors:
Enno Harms,
Georgios Lukes-Gerakopoulos,
Sebastiano Bernuzzi,
Alessandro Nagar
Abstract:
We consider a spinning test-body in circular motion around a nonrotating black hole and analyze different prescriptions for the body's dynamics. We compare, for the first time, the Mathisson-Papapetrou formalism under the Tulczyjew spin-supplementary-condition (SSC), the Pirani SSC and the Ohashi-Kyrian-Semerak SSC, and the spinning particle limit of the effective-one-body Hamiltonian of [Phys.~Re…
▽ More
We consider a spinning test-body in circular motion around a nonrotating black hole and analyze different prescriptions for the body's dynamics. We compare, for the first time, the Mathisson-Papapetrou formalism under the Tulczyjew spin-supplementary-condition (SSC), the Pirani SSC and the Ohashi-Kyrian-Semerak SSC, and the spinning particle limit of the effective-one-body Hamiltonian of [Phys.~Rev.~D.90,~044018(2014)]. We analyze the four different dynamics in terms of the ISCO shifts and in terms of the coordinate invariant binding energies, separating higher-order spin contributions from spin-orbit contributions. The asymptotic gravitational wave fluxes produced by the spinning body are computed by solving the inhomogeneous $(2+1)D$ Teukolsky equation and contrasted for the different cases. For small orbital frequencies $Ω$, all the prescriptions reduce to the same dynamics and the same radiation fluxes. For large frequencies, ${x \equiv (M Ω)^{2/3} >0.1 }$, where $M$ is the black hole mass, and especially for positive spins (aligned with orbital angular momentum) a significant disagreement between the different dynamics is observed. The ISCO shifts can differ up to a factor two for large positive spins; for the Ohashi-Kyrian-Semerak and the Pirani SSC the ISCO diverges around dimensionless spins $\sim0.52$ and $\sim0.94$ respectively. In the spin-orbit part of the energetics the deviation from the Hamiltonian dynamics is largest for the Ohashi-Kyrian-Semerak SSC; it exceeds $10\%$ for $x>0.17$. The Tulczyjew and the Pirani SSCs behave compatible across almost the whole spin and frequency range. Our results will have direct application in including spin effects to effective-one-body waveform models for circularized binaries in the extreme-mass-ratio limit.
△ Less
Submitted 7 August, 2019; v1 submitted 1 September, 2016;
originally announced September 2016.
-
Investigation of thermal acoustic effects on SRF cavities within CM1 at Fermilab
Authors:
M. W. McGee,
E. Harms,
A. Klebaner,
J. Leibfritz,
A. Martinez,
Y. Pischalnikov,
W. Schappert
Abstract:
Radio Frequency (RF) power studies are in progress following the cryogenic commissioning of Cryomodule #1 (CM1) at Fermilab's Superconducting Radio Frequency (SRF) Accelerator Test Facility. These studies are complemented by the characterization of thermal acoustic effects on cavity microphonics manifested by apparent noisy boiling of helium involving vapor bubble and liquid vibration. The thermal…
▽ More
Radio Frequency (RF) power studies are in progress following the cryogenic commissioning of Cryomodule #1 (CM1) at Fermilab's Superconducting Radio Frequency (SRF) Accelerator Test Facility. These studies are complemented by the characterization of thermal acoustic effects on cavity microphonics manifested by apparent noisy boiling of helium involving vapor bubble and liquid vibration. The thermal acoustic measurements also consider pressure and temperature spikes which drive the phenomenon at low and high frequencies.
△ Less
Submitted 1 July, 2016;
originally announced July 2016.
-
Initial experimental results of a machine learning-based temperature control system for an RF gun
Authors:
A. L. Edelen,
S. G. Biedron,
S. V. Milton,
B. E. Chase,
D. J. Crawford,
N. Eddy,
D. Edstrom Jr.,
E. R. Harms,
J. Ruan,
J. K. Santucci,
P. Stabile
Abstract:
Colorado State University (CSU) and Fermi National Accelerator Laboratory (Fermilab) have been develo** a control system to regulate the resonant frequency of an RF electron gun. As part of this effort, we present initial test results for a benchmark temperature controller that combines a machine learning-based model and a predictive control algorithm. This is part of an on-going effort to devel…
▽ More
Colorado State University (CSU) and Fermi National Accelerator Laboratory (Fermilab) have been develo** a control system to regulate the resonant frequency of an RF electron gun. As part of this effort, we present initial test results for a benchmark temperature controller that combines a machine learning-based model and a predictive control algorithm. This is part of an on-going effort to develop adaptive, machine learning-based tools specifically to address control challenges found in particle accelerator systems.
△ Less
Submitted 5 November, 2015;
originally announced November 2015.
-
Asymptotic gravitational wave fluxes from a spinning particle in circular equatorial orbits around a rotating black hole
Authors:
Enno Harms,
Georgios Lukes-Gerakopoulos,
Sebastiano Bernuzzi,
Alessandro Nagar
Abstract:
We present a new computation of the asymptotic gravitational wave energy fluxes emitted by a {\it spinning} particle in circular equatorial orbits about a Kerr black hole. The particle dynamics is computed in the pole-dipole approximation, solving the Mathisson-Papapetrou equations with the Tulczyjew spin-supplementary-condition. The fluxes are computed, for the first time, by solving the 2+1 Teuk…
▽ More
We present a new computation of the asymptotic gravitational wave energy fluxes emitted by a {\it spinning} particle in circular equatorial orbits about a Kerr black hole. The particle dynamics is computed in the pole-dipole approximation, solving the Mathisson-Papapetrou equations with the Tulczyjew spin-supplementary-condition. The fluxes are computed, for the first time, by solving the 2+1 Teukolsky equation in the time-domain using hyperboloidal and horizon-penetrating coordinates. Denoting by $M$ the black hole mass and by $μ$ the particle mass, we cover dimensionless background spins $a/M=(0,\pm0.9)$ and dimensionless particle spins $-0.9\leq S/μ^2 \leq +0.9$. Our results span orbits of Boyer-Lindquist coordinate radii $4\leq r/M \leq 30$; notably, we investigate the strong-field regime, in some cases even beyond the last-stable-orbit. We confirm, numerically, the Tanaka {\it et al.} [Phys.\ Rev.\ D 54, 3762] 2.5th order accurate Post-Newtonian (PN) predictions for the gravitational wave fluxes of a spinning particle in circular equatorial orbit: we find an unambiguos trend of the PN-prediction towards the numerical results when $r$ is large. At $r/M=30$ the fractional agreement between the full numerical flux, approximated as the sum over the modes $m=1,2,3$, and the PN prediction is $\lesssim0.5\%$ in all cases tested. This is close to our fractional numerical accuracy ($\sim 0.2\%$). For smaller radii, the agreement between the 2.5PN prediction and the numerical result progressively deteriorates. Our numerical data will be essential to develop suitably resummed expressions of the 2.5PN analytical fluxes in order to improve their accuracy in the strong-field regime.
△ Less
Submitted 7 August, 2019; v1 submitted 19 October, 2015;
originally announced October 2015.
-
The antikick strikes back: recoil velocities for nearly-extremal binary black hole mergers in the test-mass limit
Authors:
Alessandro Nagar,
Enno Harms,
Sebastiano Bernuzzi,
Anıl Zenginoğlu
Abstract:
Gravitational waves emitted from a generic binary black-hole merger carry away linear momentum anisotropically, resulting in a gravitational recoil, or "kick", of the center of mass. For certain merger configurations the time evolution of the magnitude of the kick velocity has a local maximum followed by a sudden drop. Perturbative studies of this "antikick" in a limited range of black hole spins…
▽ More
Gravitational waves emitted from a generic binary black-hole merger carry away linear momentum anisotropically, resulting in a gravitational recoil, or "kick", of the center of mass. For certain merger configurations the time evolution of the magnitude of the kick velocity has a local maximum followed by a sudden drop. Perturbative studies of this "antikick" in a limited range of black hole spins have found that the antikick decreases for retrograde orbits as a function of negative spin. We analyze this problem using a recently developed code to evolve gravitational perturbations from a point-particle in Kerr spacetime driven by an effective-one-body resummed radiation reaction force at linear order in the mass ratio $ν\ll 1$. Extending previous studies to nearly-extremal negative spins, we find that the well-known decrease of the antikick is overturned and, instead of approaching zero, the antikick increases again to reach $Δv/(cν^{2})=3.37\times10^{-3}$ for dimensionless spin $\hat{a}=-0.9999$. The corresponding final kick velocity is $v_{end}/(cν^{2})=0.076$. This result is connected to the nonadiabatic character of the emission of linear momentum during the plunge. We interpret it analytically by means of the quality factor of the flux to capture quantitatively the main properties of the kick velocity. The use of such quality factor of the flux does not require trajectories nor horizon curvature distributions and should therefore be useful both in perturbation theory and numerical relativity.
△ Less
Submitted 18 July, 2014;
originally announced July 2014.
-
A new gravitational wave generation algorithm for particle perturbations of the Kerr spacetime
Authors:
Enno Harms,
Sebastiano Bernuzzi,
Alessandro Nagar,
Anil Zenginoglu
Abstract:
We present a new approach to solve the 2+1 Teukolsky equation for gravitational perturbations of a Kerr black hole. Our approach relies on a new horizon penetrating, hyperboloidal foliation of Kerr spacetime and spatial compactification. In particular, we present a framework for waveform generation from point-particle perturbations. Extensive tests of a time domain implementation in the code {\it…
▽ More
We present a new approach to solve the 2+1 Teukolsky equation for gravitational perturbations of a Kerr black hole. Our approach relies on a new horizon penetrating, hyperboloidal foliation of Kerr spacetime and spatial compactification. In particular, we present a framework for waveform generation from point-particle perturbations. Extensive tests of a time domain implementation in the code {\it Teukode} are presented. The code can efficiently deliver waveforms at future null infinity. As a first application of the method, we compute the gravitational waveforms from inspiraling and coalescing black-hole binaries in the large-mass-ratio limit. The smaller mass black hole is modeled as a point particle whose dynamics is driven by an effective-one-body-resummed analytical radiation reaction force. We compare the analytical angular momentum loss to the gravitational wave angular momentum flux. We find that higher-order post-Newtonian corrections are needed to improve the consistency for rapidly spinning binaries. Close to merger, the subdominant multipolar amplitudes (notably the $m=0$ ones) are enhanced for retrograde orbits with respect to prograde ones. We argue that this effect mirrors nonnegligible deviations from circularity of the dynamics during the late-plunge and merger phase. We compute the gravitational wave energy flux flowing into the black hole during the inspiral using a time-domain formalism proposed by Poisson. Finally, a self-consistent, iterative method to compute the gravitational wave fluxes at leading-order in the mass of the particle is presented. For a specific case study with $\hat{a}$=0.9, a simulation that uses the consistent flux differs from one that uses the analytical flux by $\sim35$ gravitational wave cycles over a total of about $250$ cycles. In this case the horizon absorption accounts for about $+5$ gravitational wave cycles.
△ Less
Submitted 25 November, 2014; v1 submitted 23 June, 2014;
originally announced June 2014.
-
Test Results of Tesla-Style Cryomodules at Fermilab
Authors:
E. Harms,
K. Carlson,
B. Chase,
D. Crawford,
E. Cullerton,
D. Edstrom,
A. Hocker,
M. Kucera,
J. Leibfritz,
O. Nezhevenko,
D. Nicklaus,
Y. Pischalnikov,
P. Prieto,
J. Reid,
W. Schappert,
P. Varghese
Abstract:
Commissioning and operation of the first Tesla-style Cryomodule (CM-1) at Fermilab was concluded in recent months. A second Tesla Type III+ module, RFCA002, will be replacing it. CM-1 is the first 8-cavity ILC style cryomodule to be built at Fermilab and also the first accelerating cryomodule of the Advanced Superconducting Test Accelerator (ASTA). We report on the operating results of both of the…
▽ More
Commissioning and operation of the first Tesla-style Cryomodule (CM-1) at Fermilab was concluded in recent months. A second Tesla Type III+ module, RFCA002, will be replacing it. CM-1 is the first 8-cavity ILC style cryomodule to be built at Fermilab and also the first accelerating cryomodule of the Advanced Superconducting Test Accelerator (ASTA). We report on the operating results of both of these cryomodules.
△ Less
Submitted 31 January, 2013;
originally announced January 2013.
-
Status and Plans for a Superconducting RF Accelerator Test Facility at Fermilab
Authors:
J. Leibfritz,
R. Andrews,
C. M. Baffes,
K. Carlson,
B. Chase,
M. D. Church,
E. R. Harms,
A. L. Klebaner,
M. Kucera,
A. Martinez,
S. Nagaitsev,
L. E. Nobrega,
P. Piot,
J. Reid,
M. Wendt,
S. J. Wesseln
Abstract:
The Advanced Superconducting Test Acccelerator (ASTA) is being constructed at Fermilab. The existing New Muon Lab (NML) building is being converted for this facility. The accelerator will consist of an electron gun, injector, beam acceleration section consisting of 3 TTF-type or ILC-type cryomodules, multiple downstream beamlines for testing diagnostics and conducting various beam tests, and a hig…
▽ More
The Advanced Superconducting Test Acccelerator (ASTA) is being constructed at Fermilab. The existing New Muon Lab (NML) building is being converted for this facility. The accelerator will consist of an electron gun, injector, beam acceleration section consisting of 3 TTF-type or ILC-type cryomodules, multiple downstream beamlines for testing diagnostics and conducting various beam tests, and a high power beam dump. When completed, it is envisioned that this facility will initially be capable of generating a 750-MeV electron beam with ILC beam intensity. An expansion of this facility was recently completed that will provide the capability to upgrade the accelerator to a total beam energy of 1.5-GeV. Two new buildings were also constructed adjacent to the ASTA facility to house a new cryogenic plant and multiple superconducting RF (SRF) cryomodule test stands. In addition to testing accelerator components, this facility will be used to test RF power systems, instrumentation, and control systems for future SRF accelerators such as the ILC and Project-X. This paper describes the current status and overall plans for this facility.
△ Less
Submitted 29 January, 2013;
originally announced January 2013.
-
Numerical solution of the 2+1 Teukolsky equation on a hyperboloidal and horizon penetrating foliation of Kerr and application to late-time decays
Authors:
Enno Harms,
Sebastiano Bernuzzi,
Bernd Bruegmann
Abstract:
In this work we present a formulation of the Teukolsky equation for generic spin perturbations on the hyperboloidal and horizon penetrating foliation of Kerr recently proposed by Racz and Toth. An additional, spin-dependent rescaling of the field variable can be used to achieve stable, long-term, and accurate time-domain evolutions of generic spin perturbations. As an application (and a severe num…
▽ More
In this work we present a formulation of the Teukolsky equation for generic spin perturbations on the hyperboloidal and horizon penetrating foliation of Kerr recently proposed by Racz and Toth. An additional, spin-dependent rescaling of the field variable can be used to achieve stable, long-term, and accurate time-domain evolutions of generic spin perturbations. As an application (and a severe numerical test), we investigate the late-time decays of electromagnetic and gravitational perturbations at the horizon and future null infinity by means of 2+1 evolutions. As initial data we consider four combinations of (non-)stationary and (non-)compact-support initial data with a pure spin-weighted spherical harmonic profile. We present an extensive study of late time decays of axisymmetric perturbations. We verify the power-law decay rates predicted analytically, together with a certain "splitting" behaviour of the power-law exponent. We also present results for non-axisymmetric perturbations. In particular, our approach allows to study the behaviour of the late time decays of gravitational fields for nearly extremal and extremal black holes. For rapid rotation we observe a very prolonged, weakly damped, quasi-normal-mode phase. For extremal rotation the field at future null infinity shows an oscillatory behaviour decaying as the inverse power of time, while at the horizon it is amplified by several orders of magnitude over long time scales. This behaviour can be understood in terms of the superradiance cavity argument.
△ Less
Submitted 8 January, 2013;
originally announced January 2013.
-
RF Test Results from Cryomodule 1 at the Fermilab SRF Beam Test Facility
Authors:
E. Harms,
K. Carlson,
B. Chase,
E. Cullerton,
A. Hocker,
C. Jensen,
P. Joireman,
A. Klebaner,
T. Kubicki,
M. Kucera,
A. Legan,
J. Leibfritz,
A. Martinez,
M. McGee,
S. Nagaitsev,
O. Nezhevenko,
D. Nicklaus,
H. Pfeffer,
Y. Pischalnikov,
P. Prieto,
J. Reid,
W. Schappert,
V. Tupikov,
P. Varghese,
J. Branlard
Abstract:
Powered operation of Cryomodule 1 (CM-1) at the Fermilab SRF Beam Test Facility began in late 2010. Since then a series of tests first on the eight individual cavities and then the full cryomodule have been performed. We report on the results of these tests and lessons learned which will have an impact on future module testing at Fermilab.
Powered operation of Cryomodule 1 (CM-1) at the Fermilab SRF Beam Test Facility began in late 2010. Since then a series of tests first on the eight individual cavities and then the full cryomodule have been performed. We report on the results of these tests and lessons learned which will have an impact on future module testing at Fermilab.
△ Less
Submitted 18 September, 2012;
originally announced September 2012.
-
Status and plans for a SRF accelerator test faciliy at Fermilab
Authors:
J. Leibfritz,
R. Andrews,
K. Carlson,
B. Chase,
M. Church,
E. Harms,
A. Klebaner,
M. Kucera,
S. Lackey,
A. Martinez,
S. Nagaitsev,
L. Nobrega,
P. Piot,
J. Reid,
M. Wendt,
S. Wesseln
Abstract:
A superconducting RF accelerator test facility is being constructed at Fermilab. The existing New Muon Lab (NML) building is being converted for this facility. The accelerator will consist of an electron gun, injector, beam acceleration section consisting of 3 TTF-type or ILC-type cryomodules, multiple downstream beam lines for testing diagnostics and conducting various beam tests, and a high powe…
▽ More
A superconducting RF accelerator test facility is being constructed at Fermilab. The existing New Muon Lab (NML) building is being converted for this facility. The accelerator will consist of an electron gun, injector, beam acceleration section consisting of 3 TTF-type or ILC-type cryomodules, multiple downstream beam lines for testing diagnostics and conducting various beam tests, and a high power beam dump. When completed, it is envisioned that this facility will initially be capable of generating an 810 MeV electron beam with ILC beam intensity. Expansion plans of the facility are underway that will provide the capability to upgrade the accelerator to a total beam energy of 1.5 GeV. In addition to testing accelerator components, this facility will be used to test RF power equipment, instrumentation, LLRF and controls systems for future SRF accelerators such as the ILC and Project-X. This paper describes the current status and overall plans for this facility.
△ Less
Submitted 17 August, 2012;
originally announced August 2012.
-
Superfluid helium testing of a stainless steel to titanium pi** transition joint
Authors:
W. Soyars,
A. Basti,
F. Bedeschi,
J. Budagov,
M. Foley,
E. Harms,
A. Klebaner,
S. Nagaitsev,
B. Sabirov
Abstract:
Stainless steel-to-titanium bimetallic transitions have been fabricated with an explosively bonded joint. This novel joining technique was conducted by the Russian Federal Nuclear Center, working under contract for the Joint Institute for Nuclear Research. These bimetallic transitions are being considered for use in future superconducting radio-frequency cavity cryomodule assemblies. This applicat…
▽ More
Stainless steel-to-titanium bimetallic transitions have been fabricated with an explosively bonded joint. This novel joining technique was conducted by the Russian Federal Nuclear Center, working under contract for the Joint Institute for Nuclear Research. These bimetallic transitions are being considered for use in future superconducting radio-frequency cavity cryomodule assemblies. This application requires cryogenic testing to demonstrate that this transition joint remains leak-tight when sealing superfluid helium. To simulate a titanium cavity vessel connection to a stainless steel service pipe, bimetallic transition joints were paired together to fabricate pi** assemblies. These pi** assemblies were then tested in superfluid helium conditions at Fermi National Accelerator Laboratory test facilities. The transition joint test program will be described. Fabrication experience and test results will be presented.
△ Less
Submitted 27 June, 2012;
originally announced June 2012.
-
Recent advances in Ti and Nb explosion welding with stainless steel for 2K operating (ILC Program)- To the proceedings of LCWS11
Authors:
B. Sabirov,
J. Budagov,
A. Sissakian,
G. Shirkov,
Yu. Taran,
G. Trubnikov,
N. Dhanarai,
M. Foley,
E. Harms,
D. Mitchell,
S. Nagaitsev,
W. Soyars,
V. Rybakov,
Yu. Samarokov,
V. Zhigalov,
A. Basti,
F. Bedeschi
Abstract:
The world first samples 0f Ti+SS and Nb+SS joints were manufactured by an explosion welding technology demonstrating a high mechanic properties and leak absence at 4.6 x 10^{-9} atm-cc/sec. Residual stresses in bimetallic joints resulting from explosion welding measured by neutron diffraction method are quite high (~1000 MPa). Thermal tempering of explosion welded Ti+SS and Nb+SS specimens leads t…
▽ More
The world first samples 0f Ti+SS and Nb+SS joints were manufactured by an explosion welding technology demonstrating a high mechanic properties and leak absence at 4.6 x 10^{-9} atm-cc/sec. Residual stresses in bimetallic joints resulting from explosion welding measured by neutron diffraction method are quite high (~1000 MPa). Thermal tempering of explosion welded Ti+SS and Nb+SS specimens leads to complete relaxation of internal stresses in Ti,Nb and Stainless steel and makes the transition elements quite serviceable.
△ Less
Submitted 17 January, 2012;
originally announced January 2012.
