Showing 1–47 of 47 results for author: Hardt, S

Disorder-to-order transition of long fibers contained in evaporating sessile drops

Authors: S. Sannyamath, R. Vetter, H. Bonart, M. Hartmann, R. Ganguly, S. Hardt

Abstract: A liquid drop containing a long fiber is a complex system whose configuration is determined by an interplay of elastic stresses in the fiber and capillary forces due to the liquid. We study the morphological evolution of fibers that are much longer than the drop diameter in evaporating sessile drops. After insertion, the fibers are either found in an ordered or disordered state, with increasing di… ▽ More A liquid drop containing a long fiber is a complex system whose configuration is determined by an interplay of elastic stresses in the fiber and capillary forces due to the liquid. We study the morphological evolution of fibers that are much longer than the drop diameter in evaporating sessile drops. After insertion, the fibers are either found in an ordered or disordered state, with increasing disorder for increasing fiber length. Upon evaporation, the order increases, in such a way that the final configuration deposited on the solid surface is either a circle, an ellipse, or 8-shaped. The morphology of the deposit depends on the fiber length and the elastocapillary length, both non-dimensionalized with the characteristic drop size, which we classify in a morphology regime map. The disorder-to-order transition allows depositing ordered fiber structures on solid surfaces even in cases of a strongly disordered state after fiber insertion. Combined with technologies such as inkjet printing, this process could open new avenues to decorate surfaces with filamental structures whose morphology can be controlled by varying the fiber length. △ Less

Submitted 6 March, 2024; originally announced March 2024.

Journal ref: Soft Matter 20, 3107-3117 (2024)

Liquid Surfaces with Chaotic Capillary Waves Exhibit an Effective Surface Tension

Authors: Steffen Bisswanger, Henning Bonart, Pyi Thein Khaing, Steffen Hardt

Abstract: The influence of chaotic capillary waves on the time-averaged shape of a liquid volume is studied experimentally and theoretically. In that context, a liquid film containing a stable hole is subjected to Faraday waves. The waves induce a shrinkage of the hole compared to the static film, which can be described using the Young-Laplace equation by incorporating an effective capillary length. In the… ▽ More The influence of chaotic capillary waves on the time-averaged shape of a liquid volume is studied experimentally and theoretically. In that context, a liquid film containing a stable hole is subjected to Faraday waves. The waves induce a shrinkage of the hole compared to the static film, which can be described using the Young-Laplace equation by incorporating an effective capillary length. In the regime of chaotic Faraday waves, the presented theory explains the hole shrinkage quantitatively, linking the effective capillary length to the wave energy. The effect of chaotic Faraday waves can be interpreted as a dynamic surface force that acts against surface tension. △ Less

Submitted 15 December, 2023; originally announced December 2023.

Giant thermoelectric response of confined electrolytes with thermally activated charge carrier generation

Authors: Rajkumar Sarma, Steffen Hardt

Abstract: The thermoelectric response of thermally activated electrolytes (TAE) in a slit channel is studied theoretically and by numerical simulations. The term TAE refers to electrolytes whose charge carrier concentration is a function of temperature, as recently suggested for ionic liquids and highly concentrated aqueous electrolyte solutions. Two competing mechanisms driving charge transport by temperat… ▽ More The thermoelectric response of thermally activated electrolytes (TAE) in a slit channel is studied theoretically and by numerical simulations. The term TAE refers to electrolytes whose charge carrier concentration is a function of temperature, as recently suggested for ionic liquids and highly concentrated aqueous electrolyte solutions. Two competing mechanisms driving charge transport by temperature gradients are identified. For suitable values of the activation energy that governs the generation of charge carriers, a giant thermoelectric response is found, which could help explaining recent experimental results for nanoporous media infiltrated with TAEs. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Gate Electrodes Enable Tunable Nanofluidic Particle Traps

Authors: Philippe M. Nicollier, Aaron D. Ratschow, Francesca Ruggeri, Ute Drechsler, Steffen Hardt, Federico Paratore, Armin W. Knoll

Abstract: The ability to control the location of nanoscale objects in liquids is essential for fundamental and applied research from nanofluidics to molecular biology. To overcome their random Brownian motion, the electrostatic fluidic trap creates local minima in potential energy by sha** electrostatic interactions with a tailored wall topography. However, this strategy is inherently static -- once fabri… ▽ More The ability to control the location of nanoscale objects in liquids is essential for fundamental and applied research from nanofluidics to molecular biology. To overcome their random Brownian motion, the electrostatic fluidic trap creates local minima in potential energy by sha** electrostatic interactions with a tailored wall topography. However, this strategy is inherently static -- once fabricated the potential wells cannot be modulated. Here, we propose and experimentally demonstrate that such a trap can be controlled through a buried gate electrode.We measure changes in the average escape times of nanoparticles from the traps to quantify the induced modulations of $0.7k_\rm{B}T$ in potential energy and 50 mV in surface potential. Finally, we summarize the mechanism in a parameter-free predictive model, including surface chemistry and electrostatic fringing, that reproduces the experimental results. Our findings open a route towards real-time controllable nanoparticle traps. △ Less

Submitted 22 September, 2023; originally announced September 2023.

How charges separate when surfaces are dewetted

Authors: Aaron D. Ratschow, Lisa S. Bauer, Pravash Bista, Stefan A. L. Weber, Hans-Jürgen Butt, Steffen Hardt

Abstract: Charge separation at moving three-phase contact lines is observed in nature as well as technological processes. Despite the growing number of experimental investigations in recent years, the physical mechanism behind the charging remains obscure. Here we identify the origin of charge separation as the dewetting of the bound surface charge within the electric double layer by the receding contact li… ▽ More Charge separation at moving three-phase contact lines is observed in nature as well as technological processes. Despite the growing number of experimental investigations in recent years, the physical mechanism behind the charging remains obscure. Here we identify the origin of charge separation as the dewetting of the bound surface charge within the electric double layer by the receding contact line. This charge depends strongly on the local electric double layer structure close to the contact line, which is affected by the gas-liquid interface and the internal flow of the liquid. We summarize the charge separation mechanism in an analytical model that captures parametric dependencies in agreement with our experiments and numerical simulations. Charge separation increases with increasing contact angle and decreases with increasing dewetting velocity. Our findings reveal the universal mechanism of charge separation at receding contact lines, relevant to many dynamic wetting scenarios, and provide a theoretical foundation for both fundamental questions, like contact angle hysteresis, and practical applications. △ Less

Submitted 3 May, 2023; originally announced May 2023.

Surface charge deposition by moving drops reduces contact angles

Authors: Xiaomei Li, Aaron D. Ratschow, Steffen Hardt, Hans-Jürgen Butt

Abstract: Slide electrification - the spontaneous charge separation by sliding water drops - can lead to an electrostatic potential of 1 kV and change drop motion substantially. To find out, how slide electrification influences the contact angles of moving drops, we analyzed the dynamic contact angles of aqueous drops sliding down tilted plates with insulated surfaces, grounded surfaces, and while grounding… ▽ More Slide electrification - the spontaneous charge separation by sliding water drops - can lead to an electrostatic potential of 1 kV and change drop motion substantially. To find out, how slide electrification influences the contact angles of moving drops, we analyzed the dynamic contact angles of aqueous drops sliding down tilted plates with insulated surfaces, grounded surfaces, and while grounding the drop. The observed decrease in dynamic contact angles at different salt concentrations is attributed to two effects: An electrocapillary reduction of contact angles caused by drop charging and a change in the free surface energy of the solid due to surface charging. △ Less

Submitted 26 April, 2023; originally announced April 2023.

Journal ref: Phys. Rev. Lett. 131, 228201 (2023)

Resonantly-driven nanopores can serve as nanopumps

Authors: Aaron D. Ratschow, Doyel Pandey, Benno Liebchen, Somnath Bhattacharyya, Steffen Hardt

Abstract: Inducing transport in electrolyte-filled nanopores with dc fields has led to influential applications ranging from nanosensors to DNA sequencing. Here we use the Poisson-Nernst-Planck and Navier-Stokes equations to show that unbiased ac fields can induce comparable directional flows in gated conical nanopores. This flow exclusively occurs at intermediate driving frequencies and hinges on the reson… ▽ More Inducing transport in electrolyte-filled nanopores with dc fields has led to influential applications ranging from nanosensors to DNA sequencing. Here we use the Poisson-Nernst-Planck and Navier-Stokes equations to show that unbiased ac fields can induce comparable directional flows in gated conical nanopores. This flow exclusively occurs at intermediate driving frequencies and hinges on the resonance of two competing timescales, representing space charge development at the ends and in the interior of the pore. We summarize the physics of resonant nanopum** in an analytical model that reproduces the results of numerical simulations. Our findings provide a generic route towards real-time controllable flow patterns, which might find applications in controlling the translocation of particles such as small molecules or nanocolloids. △ Less

Submitted 19 July, 2022; originally announced July 2022.

MSC Class: 76Wxx

Journal ref: Physical Review Letters 129, 264501 (2022)

Controlling the electrostatic Faraday instability using superposed electric fields

Authors: Sebastian Dehe, Maximilian Hartmann, Aditya Bandopadhyay, Steffen Hardt

Abstract: When the interface between a dielectric and a conducting liquid is excited by an oscillatory electric field, electrostatic Faraday waves can be induced. Here, we study the response of the interface to an AC electric field, which is superposed by either a second AC field of different frequency, or by a DC field. An algorithm based on light refraction at the fluidic interface is used to obtain the s… ▽ More When the interface between a dielectric and a conducting liquid is excited by an oscillatory electric field, electrostatic Faraday waves can be induced. Here, we study the response of the interface to an AC electric field, which is superposed by either a second AC field of different frequency, or by a DC field. An algorithm based on light refraction at the fluidic interface is used to obtain the spatio-temporal response of the Faraday waves, and the critical voltage corresponding to onset of instability, the interfacial oscillation frequency and the dominant wavelengths are determined. The influence of the mixing ratio, which denotes the relative amplitudes of the different components of the driving signal, is analyzed, and the experimental results are compared with theoretical predictions. For AC/AC driving, gradual variations of the mixing ratio can induce a jump of the pattern wavelength, which is a result of the transition from harmonic to a subharmonic oscillation. For AC/DC driving, the interface oscillates either harmonically or subharmonically, and the response wavelength can be tuned continuously by adjusting the admixture of the DC component. For both driving modes, the experiments show good agreement with theory. △ Less

Submitted 7 April, 2022; originally announced April 2022.

Comments: 10 pages, 4 figures

Shear flow over a surface containing a groove covered by an incompressible surfactant phase

Authors: Tobias Baier, Steffen Hardt

Abstract: We study shear-driven liquid flow over a planar surface with an embedded gas-filled groove, with the gas-liquid interface protruding slightly above or below the planar surface. The flow direction is along the groove, taken to be much longer than wide, and the gas-liquid interface is assumed to be covered by an incompressible surface fluid, representing a surfactant phase. Using the incompressiblit… ▽ More We study shear-driven liquid flow over a planar surface with an embedded gas-filled groove, with the gas-liquid interface protruding slightly above or below the planar surface. The flow direction is along the groove, taken to be much longer than wide, and the gas-liquid interface is assumed to be covered by an incompressible surface fluid, representing a surfactant phase. Using the incompressiblity condition for the surface fluid, the equations of motion and corresponding boundary conditions for the liquid phase are obtained by minimizing the dissipation rate. Assuming a moderate deformation of the interface, a domain perturbation technique with the maximal deformation as the small parameter is employed. The Stokes equation in the liquid phase under corresponding boundary conditions is solved to second order in the deformation using the Keldysh-Sedov formalism. The obtained analytical results are compared with numerical calculations of the same problem, allowing an assessment of the limits of validity of the expansion. While on a planar gas-liquid interface no flow is induced, a recirculating flow is observed on an interface protruding slightly above or below the planar surface. The study sheds light onto the mobility of curved gas-liquid interfaces in the presence of surfactants acting as an incompressible surface fluid. △ Less

Submitted 2 September, 2022; v1 submitted 5 April, 2022; originally announced April 2022.

Comments: revised version; 16 pages, 4 figures

Journal ref: J. Fluid Mech., 949, A34 (2022)

The spatial structure of electrostatically forced Faraday waves

Authors: S. Dehe, M. Hartmann, A. Bandopadhyay, S. Hardt

Abstract: The instability of the interface between a dielectric and a conducting liquid, excited by a spatially homogeneous interface-normal time-periodic electric field, is studied based on experiments and theory. Special attention is paid to the spatial structure of the excited Faraday waves. The dominant modes of the instability are extracted using high-speed imaging in combination with an algorithm eval… ▽ More The instability of the interface between a dielectric and a conducting liquid, excited by a spatially homogeneous interface-normal time-periodic electric field, is studied based on experiments and theory. Special attention is paid to the spatial structure of the excited Faraday waves. The dominant modes of the instability are extracted using high-speed imaging in combination with an algorithm evaluating light refraction at the liquid-liquid interface. The influence of the liquid viscosities on the critical voltage corresponding to the onset of instability and on the dominant wavelength is studied. Overall, good agreement with theoretical predictions that are based on viscous fluids in an infinite domain is demonstrated. Depending on the relative influence of the domain boundary, the patterns exhibit either discrete modes corresponding to surface harmonics or boundary-independent patterns. The agreement between experiments and theory confirms that the electrostatically forced Faraday instability is sufficiently well understood, which may pave the way to control electrostatically driven instabilities. Last but not least, the analogies to classical Faraday instabilities may enable new approaches to study effects that have so far only been observed for mechanical forcing. △ Less

Submitted 29 October, 2021; originally announced November 2021.

Comments: 28 pages, 10 figures

Deformation modes of an oil-water interface under a local electric field: From Taylor cones to surface dimples

Authors: Sebastian Dehe, Steffen Hardt

Abstract: Fluidic interfaces disintegrate under sufficiently strong electric fields, leading to electrohydrodynamic (EHD) tip streaming. Taylor cones, which emit charged droplets from the tip of a conical cusp, are among the most prominent and well-studied examples of EHD instabilities. In liquid-liquid systems, more complex interface deformation modes than simple Taylor cones can be observed, with the inte… ▽ More Fluidic interfaces disintegrate under sufficiently strong electric fields, leading to electrohydrodynamic (EHD) tip streaming. Taylor cones, which emit charged droplets from the tip of a conical cusp, are among the most prominent and well-studied examples of EHD instabilities. In liquid-liquid systems, more complex interface deformation modes than simple Taylor cones can be observed, with the interface being pushed away from the electrode, and additional cone structures emerging from the rim of the dimple. In this article, we investigate the mechanisms behind these deformation modes experimentally and numerically, and demonstrate that the presence of droplets triggers the dimple at the interface. In order to characterize the underlying processes, we replace the pin electrode by a hollow metallic needle with a prescribed electrolyte volume flow. The submerged electrospray introduces droplets of an aqueous KCl solution with varying ion concentrations into silicone oils with varying viscosities. By measuring the corresponding electric current and by optical investigation of the interface deformation, we study the system response to variations of the ionic concentration, viscosity, applied voltage as well as flow rate. In addition to the experiments, we use a finite element solver and compute the charge transport due to the droplets in the oil phase. Further, we compute the electric potential distribution, flow field and interface deformation. After calibration of our model with particle tracking velocimetry data of the flow inside the oil phase, we reproduce the experimentally observed dimple at the liquid-liquid interface. In summary, this work highlights the importance of charged droplets for the complex dynamic modes observed when a liquid-liquid interface is exposed to a local electric field. △ Less

Submitted 4 January, 2022; v1 submitted 20 March, 2021; originally announced March 2021.

Comments: 21 pages, 10 figures; Revised version of the paper; Additional discussion of the interface deformation and the Maxwell stress; Published in Physical Review Fluids

Journal ref: Physical Review Fluids, 6(12), p.123702 (2021)

Electroosmotic flow in small-scale channels induced by surface-acoustic waves

Authors: Mathias Dietzel, Steffen Hardt

Abstract: Numerical simulations of the Navier-Stokes, Nernst-Planck, and the Poisson equations are employed to describe the transport processes in an aqueous electrolyte in a parallel-plate nanochannel, where surface-acoustic waves (SAWs) are standing or traveling along (piezo-active) channel walls. It is found that -- in addition to the conventional acoustic streaming flow -- a time-averaged electroosmotic… ▽ More Numerical simulations of the Navier-Stokes, Nernst-Planck, and the Poisson equations are employed to describe the transport processes in an aqueous electrolyte in a parallel-plate nanochannel, where surface-acoustic waves (SAWs) are standing or traveling along (piezo-active) channel walls. It is found that -- in addition to the conventional acoustic streaming flow -- a time-averaged electroosmotic flow is induced. Employing the stream function-vorticity formulation, it is shown that the Maxwell stress term causes an electroosmotic propulsion that is qualitatively identical to the one discussed in the context of alternating current (AC) electroosmosis (EOF). Differences arise mainly due to the high actuation frequencies of SAWs, which are in the MHz range rather than in the kHz regime typical for ACEOF. Moreover, the instantaneous spatial periodicity of the EOF in the travel direction of the SAW is intrinsically linked to the dispersion relation of the latter rather than a free geometric parameter. This leads to a specific frequency band where an EOF of sizable magnitude can be found. On the low frequency end, the ratio between the electric double layer (EDL) thickness and the SAW wavelength becomes extremely small so that the net force leading to a non-vanishing time-averaged flow becomes equally small. On the high frequency end, the RC time of the EDL is much larger than the inverse of the SAW frequency leading to a vanishing effective charge density of the EDL. For a parallel-plate channel, the EOF can be maximized by using two SAWs on both channel walls that have the same frequency but are phase-shifted by $180^\circ$. It appears that the SAW-EOF is the dominant pum** mechanism for such a scenario. The proposed actuation might be a viable alternative for driving liquid electrolytes through narrow ducts and channels, without the need for electric interconnects and electrodes. △ Less

Submitted 22 December, 2020; v1 submitted 20 June, 2020; originally announced June 2020.

Comments: 16 pages, 6 figures

Journal ref: Phys. Rev. Fluids 5, 123702 (2020)

Breakup Dynamics of Capillary Bridges on Hydrophobic Stripes

Authors: Maximilian Hartmann, Mathis Fricke, Lukas Weimar, Dirk Gründing, Tomislav Marić, Dieter Bothe, Steffen Hardt

Abstract: The breakup dynamics of a capillary bridge on a hydrophobic stripe between two hydrophilic stripes is studied experimentally and numerically using direct numerical simulations. The capillary bridge is formed from an evaporating water droplet wetting three neighboring stripes of a chemically patterned surface. By considering the breakup process in a phase space representation, the breakup dynamics… ▽ More The breakup dynamics of a capillary bridge on a hydrophobic stripe between two hydrophilic stripes is studied experimentally and numerically using direct numerical simulations. The capillary bridge is formed from an evaporating water droplet wetting three neighboring stripes of a chemically patterned surface. By considering the breakup process in a phase space representation, the breakup dynamics can be evaluated without the uncertainty in determining the precise breakup time. The simulations are based on the Volume-of-Fluid (VOF) method implemented in Free Surface 3D (FS3D). In order to construct physically realistic initial data for the VOF simulation, Surface Evolver is employed to calculate an initial configuration consistent with experiments. Numerical instabilities at the contact line are reduced by a novel discretization of the Navier-slip boundary condition on staggered grids. The breakup of the capillary bridge cannot be characterized by a unique scaling relationship. Instead, at different stages of the breakup process different scaling exponents apply, and the structure of the bridge undergoes a qualitative change. In the final stage of breakup, the capillary bridge forms a liquid thread that breaks up consistently with the Rayleigh-Plateau instability. △ Less

Submitted 20 April, 2021; v1 submitted 4 October, 2019; originally announced October 2019.

Comments: accepted manuscript, 28 pages, 19 figures

Journal ref: International Journal of Multiphase Flow 140 (2021) 103582

Wetting of an annular liquid in a capillary tube

Authors: Cun**g Lv, Steffen Hardt

Abstract: In this paper, we systematically investigate the wetting behavior of a liquid ring in a cylindrical capillary tube. We obtain analytical solutions of the axisymmetric Young-Laplace equation for arbitrary contact angles. We find that, for specific values of the contact angle and the volume of the liquid ring, two solutions of the Young-Laplace equation exist, but only the one with the lower value o… ▽ More In this paper, we systematically investigate the wetting behavior of a liquid ring in a cylindrical capillary tube. We obtain analytical solutions of the axisymmetric Young-Laplace equation for arbitrary contact angles. We find that, for specific values of the contact angle and the volume of the liquid ring, two solutions of the Young-Laplace equation exist, but only the one with the lower value of the total interfacial energy corresponds to a stable configuration. The transition to an unstable configuration is characterized by specific critical parameters such as the liquid volume, throat diameter etc. Beyond the stable regime, the liquid ring transforms into a plug. Based on numerical simulations, we also discuss the transition of an axisymmetric ring into non-axisymmetric configurations. Such a transition can be induced by the Rayleigh-Plateau instability of a slender liquid ring. The results are presented in terms of a map showing the different liquid morphologies as a function of the parameters governing the problem. △ Less

Submitted 26 September, 2019; originally announced September 2019.

Comments: 31 pages, 10 figures

The effective shear and dilatational viscosity of a particle-laden interface in the dilute limit

Authors: Michael Eigenbrod, Steffen Hardt

Abstract: The effective dilatational and shear viscosities of a particle-laden fluid interface are computed in the dilute limit under the assumption of an asymptotically vanishing viscosity ratio between both fluids. Spherical particles with a given contact angle of the fluid interface at the particle surface are considered. A planar fluid interface and a small Reynolds number are assumed. The theoretical a… ▽ More The effective dilatational and shear viscosities of a particle-laden fluid interface are computed in the dilute limit under the assumption of an asymptotically vanishing viscosity ratio between both fluids. Spherical particles with a given contact angle of the fluid interface at the particle surface are considered. A planar fluid interface and a small Reynolds number are assumed. The theoretical analysis is based on a domain perturbation expansion in the deviation of the contact angle from $90^\circ$ up to the second order. The resulting effective dilatational viscosity shows a stronger dependence on the contact angle than the effective shear viscosity, and its magnitude is larger for all contact angles. As an application of the theory, the stability of a liquid cylinder decorated with particles is considered. The limits of validity of the theory and possible applications in terms of numerical simulations of particle-laden interfaces are discussed. △ Less

Submitted 20 February, 2020; v1 submitted 9 September, 2019; originally announced September 2019.

Comments: 28 pages, 4 figures

Thermophoresis of Janus particles at large Knudsen numbers

Authors: Tobias Baier, Sudarshan Tiwari, Samir Shrestha, Axel Klar, Steffen Hardt

Abstract: The force and torque on a Janus sphere moving in a rarefied gas with a thermal gradient are calculated. The regime of large Knudsen number is considered, with the momenta of im**ing gas molecules either obtained from a Chapman-Enskog distribution or from a binary Maxwellian distribution between two opposing parallel plates at different temperature. The reflection properties at the surface of the… ▽ More The force and torque on a Janus sphere moving in a rarefied gas with a thermal gradient are calculated. The regime of large Knudsen number is considered, with the momenta of im**ing gas molecules either obtained from a Chapman-Enskog distribution or from a binary Maxwellian distribution between two opposing parallel plates at different temperature. The reflection properties at the surface of the Janus particle are characterized by accommodation coefficients having constant but dissimilar values on each hemisphere. It is shown that the Janus particle preferentially orients such that the hemisphere with a larger accommodation coefficient points towards the lower temperature. The thermophoretic velocity of the particle is computed, and the influence of the thermophoretic motion on the magnitude of the torque responsible for the particle orientation is studied. The analytical calculations are supported by Direct Simulation Monte Carlo results, extending the scope of the study towards smaller Knudsen numbers. The results shed light on the efficiency of oriented deposition of nanoparticles from the gas phase onto a cold surface. △ Less

Submitted 13 July, 2018; originally announced July 2018.

Journal ref: Phys. Rev. Fluids 3, 094202 (2018)

Forced dynamic dewetting of structured surfaces: Influence of surfactants

Authors: Franziska Henrich, Dorota Linke, Hans Martin Sauer, Edgar Dörsam, Steffen Hardt, Hans-Jürgen Butt, Günter K. Auernhammer

Abstract: We analyse the dewetting of printing plates for gravure printing with well-defined gravure cells. The printing plates were mounted on a rotating horizontal cylinder that is half immersed in an aqueous solution of the anionic surfactant sodium 1-decanesulfonate. The gravure plates and the presence of surfactants serve as one example of a real-world dewetting situation. When rotating the cylinder, a… ▽ More We analyse the dewetting of printing plates for gravure printing with well-defined gravure cells. The printing plates were mounted on a rotating horizontal cylinder that is half immersed in an aqueous solution of the anionic surfactant sodium 1-decanesulfonate. The gravure plates and the presence of surfactants serve as one example of a real-world dewetting situation. When rotating the cylinder, a liquid meniscus was partially drawn out of the liquid forming a dynamic contact angle at the contact line. The dynamic contact angle is decreased on a structured surface as compared to a smooth one. This is due to contact line pinning at the borders of the gravure cells. Additionally, surfactants tend to decrease the dynamic receding contact angle. We consider the interplay between these two effects. We compare the height differences of the meniscus on the structured and unstructured area as function of dewetting speeds. The height difference increases with increasing dewetting speed. With increasing size of the gravure cells this height difference and the induced changes in the dynamic contact angle increased. By adding surfactant, the height difference and the changes in the contact angle for the same surface decreased. We further note that although the liquid dewets the printing plates some liquid is always left in the gravure cell. At high enough surfactant concentrations or high enough dewetting speed, the dynamic contact angles in the structured surface approach those in flat surfaces. We conclude that surfactant reduces the influence of surface structure on dynamic dewetting. △ Less

Submitted 13 February, 2019; v1 submitted 28 March, 2018; originally announced March 2018.

Journal ref: Phys. Rev. Fluids 4 (2019), 124202

Stability of a horizontal viscous fluid layer in a vertical time periodic electric field

Authors: Aditya Bandopadhyay, Steffen Hardt

Abstract: The stability of a horizontal interface between two viscous fluids, one of which is conducting and the other is dielectric, acted upon by a vertical time-periodic electric field is considered. The two fluids are bounded by electrodes separated by a finite distance. By means of Floquet theory, the marginal stability curves are obtained, thereby elucidating the dependency of the critical voltage and… ▽ More The stability of a horizontal interface between two viscous fluids, one of which is conducting and the other is dielectric, acted upon by a vertical time-periodic electric field is considered. The two fluids are bounded by electrodes separated by a finite distance. By means of Floquet theory, the marginal stability curves are obtained, thereby elucidating the dependency of the critical voltage and wavenumber upon the fluid viscosities. The limit of vanishing viscosities is shown to be in excellent agreement with the marginal stability curves predicted by means of a Mathieu equation. The methodology to obtain the marginal stability curves developed here is applicable to any arbitrary but time periodic-signal, as demonstrated for the case of a signal with two different frequencies. As a special case, the marginal stability curves for an applied ac voltage biased by a dc voltage are depicted. It is shown that the mode coupling caused by the normal stress at the interface due to the electric field leads to appearance of harmonic modes and subharmonic modes. This is in contrast to the application of a voltage with a single frequency which always leads to a harmonic mode. Whether a harmonic or subharmonic mode is the most unstable one depends on details of the excitation signal. It is also shown that the electrode spacing has a distinct effect on the stability bahavior of the system. △ Less

Submitted 29 May, 2017; originally announced May 2017.

Knudsen pump inspired by Crookes radiometer with a specular wall

Authors: Tobias Baier, Steffen Hardt, Vahid Shahabi, Ehsan Roohi

Abstract: A rarefied gas is considered in a channel consisting of two infinite parallel plates between which an evenly spaced array of smaller plates is arranged normal to the channel direction. Each of these smaller plates is assumed to possess one ideally specularly reflective and one ideally diffusively reflective side. When the temperature of the small plates differs from the temperature of the sidewall… ▽ More A rarefied gas is considered in a channel consisting of two infinite parallel plates between which an evenly spaced array of smaller plates is arranged normal to the channel direction. Each of these smaller plates is assumed to possess one ideally specularly reflective and one ideally diffusively reflective side. When the temperature of the small plates differs from the temperature of the sidewalls of the channel, these boundary conditions result in a temperature profile around the edges of each small plate which breaks the reflection symmetry along the channel direction. This in turn results in a force on each plate and a net gas flow along the channel. The situation is analysed numerically using the direct simulation Monte Carlo (DSMC) method and compared with analytical results where available. The influence of the ideally specularly reflective wall is assessed by comparing with simulations using a finite accommodation coefficient at the corresponding wall. The configuration bears some similarity with a Crookes radiometer, where a non-symmetric temperature profile at the radiometer vanes is generated by different temperatures on each side of the vane, resulting in a motion of the rotor. The described principle may find applications in pum** gas on small scales driven by temperature gradients. △ Less

Submitted 15 March, 2017; originally announced March 2017.

Journal ref: Phys. Rev. Fluids 2, 033401 (2017)

Conjugated liquid layers driven by the short-wavelength Bénard-Marangoni instability: experiment and numerical simulation

Authors: Iman Nejati, Mathias Dietzel, Steffen Hardt

Abstract: The coupled dynamics of two conjugated liquid layers of disparate thicknesses, which coat a solid substrate and are subjected to a transverse temperature gradient, is investigated. The upper liquid layer evolves under the short-wavelength (SW) Bénard-Marangoni (BM) instability, whereas the lower, much thinner film undergoes a shear-driven long-wavelength deformation. Although the lubricating film… ▽ More The coupled dynamics of two conjugated liquid layers of disparate thicknesses, which coat a solid substrate and are subjected to a transverse temperature gradient, is investigated. The upper liquid layer evolves under the short-wavelength (SW) Bénard-Marangoni (BM) instability, whereas the lower, much thinner film undergoes a shear-driven long-wavelength deformation. Although the lubricating film should reduce the viscous stresses acting on the up to one hundred times thicker upper layer by only 10%, it is found that the critical Marangoni number of marginal stability may be as low as if a stress-free boundary condition were applied at the bottom of the upper layer, i.e. much lower than the classical value of 79.6 known for a single film. Furthermore, it is experimentally verified that the deformation of the liquid-liquid interface, albeit small, has a non-negligible effect on the temperature distribution along the liquid-gas interface of the upper layer. This stabilizes the hexagonal pattern symmetry towards external disturbances and indicates a two-way coupling of the different layers. The experiments also demonstrate how convection patterns formed in a liquid film can be used to pattern a second conjugated film. The experimental findings are verified by a numerical model of the coupled layers. △ Less

Submitted 3 May, 2016; originally announced May 2016.

Comments: 25 pages, 12 figures

Journal ref: J. Fluid Mech. 783 (2015) 46-71

Interfacial instability of liquid films coating the walls of a parallel-plate channel and sheared by a gas flow

Authors: Miklós Vécsei, Mathias Dietzel, Steffen Hardt

Abstract: The stability of liquid films coating the walls of a parallel-plate channel and sheared by a pressure-driven gas flow along the channel centre is studied. The films are susceptible to a long-wavelength instability, whose dynamic behaviour is found - for sufficiently low Reynolds numbers and thick gas layers - to be described by two coupled non-linear partial differential equations. To the best of… ▽ More The stability of liquid films coating the walls of a parallel-plate channel and sheared by a pressure-driven gas flow along the channel centre is studied. The films are susceptible to a long-wavelength instability, whose dynamic behaviour is found - for sufficiently low Reynolds numbers and thick gas layers - to be described by two coupled non-linear partial differential equations. To the best of our knowledge, such coupled fully non-linear equations for the film thicknesses have not been derived previously. A linear stability analysis conducted under the condition that the material properties and the initial undisturbed liquid film thicknesses are equal can be utilized to determine whether the interfaces are predominantly destabilized by the variations of the shear stress or by the pressure gradient acting upon them. The analysis of the weakly non-linear equations performed for this case shows that instabilities corresponding to a vanishing Reynolds number are absent from the system. Moreover, for this configuration, the patterns emerging along the two interfaces are found to be identical in the long-time limit, implying that the films are fully synchronized. A different setup, where the liquid films have identical material properties but their undisturbed thicknesses differ, is studied numerically. The results show that even for this configuration the interfacial waves remain phase-synchronized and closely correlated for a broad range of parameters. These findings are particularly relevant for multiphase flow in narrow ducts, for example in the respiratory system or in microfluidic channels. △ Less

Submitted 20 April, 2016; originally announced April 2016.

Comments: 26 pages, 6 figures

Thermoelectricity in confined liquid electrolytes

Authors: Mathias Dietzel, Steffen Hardt

Abstract: The electric field in an extended phase of a liquid electrolyte exposed to a temperature gradient is attributed to different thermophoretic mobilities of the ion species. As shown herein, such Soret-type ion thermodiffusion is not required to induce thermoelectricity even in the simplest electrolyte if it is confined between charged walls. The space charge of the electric double layer leads to sel… ▽ More The electric field in an extended phase of a liquid electrolyte exposed to a temperature gradient is attributed to different thermophoretic mobilities of the ion species. As shown herein, such Soret-type ion thermodiffusion is not required to induce thermoelectricity even in the simplest electrolyte if it is confined between charged walls. The space charge of the electric double layer leads to selective ion diffusion driven by a temperature-dependent electrophoretic ion mobility, which -- for narrow channels -- may cause thermo-voltages larger in magnitude than for the classical Soret equilibrium. △ Less

Submitted 23 June, 2020; v1 submitted 30 November, 2015; originally announced November 2015.

Comments: 6 pages, 3 figures

Journal ref: Phys. Rev. Lett. 116, 225901 (2016)

Drag and diffusion coefficients of a spherical particle attached to a fluid interface

Authors: Aaron Dörr, Steffen Hardt

Abstract: Explicit analytical expressions for the drag and diffusion coefficients of a spherical particle attached to the interface between two immiscible fluids are constructed for the case of a small viscosity ratio between the fluid phases. The model is designed to explicitly account for the dependence on the contact angle between the two fluids and the solid surface. The Lorentz reciprocal theorem is ap… ▽ More Explicit analytical expressions for the drag and diffusion coefficients of a spherical particle attached to the interface between two immiscible fluids are constructed for the case of a small viscosity ratio between the fluid phases. The model is designed to explicitly account for the dependence on the contact angle between the two fluids and the solid surface. The Lorentz reciprocal theorem is applied in the context of a geometric perturbation approach, which is based on the deviation of the contact angle from a 90°-value. By testing the model against experimental and numerical data from the literature, good agreement is found within the entire range of contact angles below 90°. As an advantage of the method reported, the drag and diffusion coefficients can be calculated up to second order in the perturbation parameter, while it is sufficient to know the velocity and pressure fields only up to first order. Extensions to other particle shapes with known velocity and pressure fields are straightforward. △ Less

Submitted 19 February, 2015; originally announced February 2015.

Comments: 11 pages, 2 figures, 1 appendix; submitted to Journal of Fluid Mechanics

Line tension and reduction of apparent contact angle associated with electric double layers

Authors: Aaron Dörr, Steffen Hardt

Abstract: The line tension of an electrolyte wetting a non-polar substrate is computed analytically and numerically. The results show that, depending on the value of the apparent contact angle, positive or negative line tension values may be obtained. Furthermore, a significant difference between Young's contact angle and the apparent contact angle measured several Debye lengths remote from the three-phase… ▽ More The line tension of an electrolyte wetting a non-polar substrate is computed analytically and numerically. The results show that, depending on the value of the apparent contact angle, positive or negative line tension values may be obtained. Furthermore, a significant difference between Young's contact angle and the apparent contact angle measured several Debye lengths remote from the three-phase contact line occurs. When applying the results to water wetting highly charged surfaces, line tension values of the same order of magnitude as found in recent experiments can be achieved. Therefore, the theory presented may contribute to the understanding of line tension measurements and points to the importance of the electrostatic line tension. Being strongly dependent on the interfacial charge density, electrostatic line tension is found to be tunable via the pH value of the involved electrolyte. As a practical consequence, the stability of nanoparticles adsorbed at fluid-fluid interfaces is predicted to be dependent on the pH value. The theory is suited for future incorporation of effects due to surfactants where even larger line tension values can be expected. △ Less

Submitted 5 November, 2014; originally announced November 2014.

Comments: 8 pages, 3 figures

Journal ref: Phys. Fluids 26, 082105 (2014)

Driven particles at fluid interfaces acting as capillary dipoles

Authors: Aaron Dörr, Steffen Hardt

Abstract: The dynamics of spherical particles driven along an interface between two immiscible fluids is investigated asymptotically. Under the assumptions of a pinned three-phase contact line and very different viscosities of the two fluids, a particle assumes a tilted orientation. As it moves, it causes a deformation of the fluid interface which is also computed. The case of two interacting driven particl… ▽ More The dynamics of spherical particles driven along an interface between two immiscible fluids is investigated asymptotically. Under the assumptions of a pinned three-phase contact line and very different viscosities of the two fluids, a particle assumes a tilted orientation. As it moves, it causes a deformation of the fluid interface which is also computed. The case of two interacting driven particles is studied via the Linear Superposition Approximation. It is shown that the capillary interaction force resulting from the particle motion is dipolar in terms of the azimuthal angle and decays with the fifth power of the inter-particle separation, similar to a capillary quadrupole originating from undulations of the three-phase contact line. The dipolar interaction is demonstrated to exceed the quadrupolar interaction at moderate particle velocities. △ Less

Submitted 31 March, 2015; v1 submitted 5 November, 2014; originally announced November 2014.

Comments: 21 pages, 9 figures, 1 table

Journal ref: J. Fluid Mech. 770 (2015), pp. 5-26

Droplet Formation via Solvent Shifting in a Microfluidic Device

Authors: Ramin Hajian, Steffen Hardt

Abstract: Solvent shifting is a process in which a non-solvent is added to a solvent/solute mixture and extracts the solvent. The solvent and the non-solvent are miscible. Because of solution supersaturation a portion of the solute transforms to droplets. In this paper, based on this process, we present an investigation on droplet formation and their radial motion in a microfluidic device in which a jet is… ▽ More Solvent shifting is a process in which a non-solvent is added to a solvent/solute mixture and extracts the solvent. The solvent and the non-solvent are miscible. Because of solution supersaturation a portion of the solute transforms to droplets. In this paper, based on this process, we present an investigation on droplet formation and their radial motion in a microfluidic device in which a jet is injected in a co-flowing liquid stream. Thanks to the laminar flow, the microfluidic setup enables studying diffusion mass transfer in radial direction and obtaining well-defined concentration distributions. Such profiles together with Ternary Phase Diagram (TPD) give detailed information about the conditions for droplet formation condition as well as their radial migration in the channel. The ternary system is composed of ethanol (solvent), de-ionized water (non-solvent) and divinyle benzene (solute). We employ analytical/numerical solutions of the diffusion equation to obtain concentration profiles of the components. We show that in the system under study droplets are formed in a region of the phase diagram between the binodal and the spinodal, i.e. via a thermally activated process. The droplets are driven to the channel centerline by the solutal Marangoni effect but are not able to significantly penetrate into the single-phase region, where they get rapidly dissolved. Therefore, the radial motion of the binodal surface carries the droplets to the centerline where they get collected. △ Less

Submitted 29 September, 2014; originally announced September 2014.

Comments: 30 pages, 8 figures, 1 table

Coupled self-organization: Thermal interaction between two liquid films undergoing long-wavelength instabilities

Authors: Miklós Vécsei, Mathias Dietzel, Steffen Hardt

Abstract: The effects of thermal coupling between two thin liquid layers, separated by a gas layer, are discussed. The liquid layers undergo long-wavelength instabilities driven by gravitational and thermocapillary stresses. To study the dynamics, both a linear stability analysis and a full numerical solution of the thin-film equations are performed. The results demonstrate that the stability properties of… ▽ More The effects of thermal coupling between two thin liquid layers, separated by a gas layer, are discussed. The liquid layers undergo long-wavelength instabilities driven by gravitational and thermocapillary stresses. To study the dynamics, both a linear stability analysis and a full numerical solution of the thin-film equations are performed. The results demonstrate that the stability properties of the combined system differ substantially from the case where both layers evolve independently from each other. Most prominently, oscillatory instabilities, not present in single-liquid layer configurations, may occur. △ Less

Submitted 11 July, 2014; originally announced July 2014.

Comments: 12 pages, 9 figures

Numerical simulation of moving rigid body in rarefied gases

Authors: Samir Shrestha, Sudarshan Tiwari, Axel Klar, Steffen Hardt

Abstract: In this paper we present a numerical scheme to simulate a moving rigid body with arbitrary shape suspended in a rarefied gas. The rarefied gas is simulated by solving the Boltzmann equation using a DSMC particle method. The motion of the rigid body is governed by the Newton-Euler equations, where the force and the torque on the rigid body is computed from the momentum transfer of the gas molecules… ▽ More In this paper we present a numerical scheme to simulate a moving rigid body with arbitrary shape suspended in a rarefied gas. The rarefied gas is simulated by solving the Boltzmann equation using a DSMC particle method. The motion of the rigid body is governed by the Newton-Euler equations, where the force and the torque on the rigid body is computed from the momentum transfer of the gas molecules colliding with the body. On the other hand, the motion of the rigid body influences the gas flow in its surroundings. We validate the numerical results by testing the Einstein relation for Brownian motion of the suspended particle. The translational as well as the rotational degrees of freedom are taken into account. It is shown that the numerically computed translational and rotational diffusion coefficients converge to the theoretical values. △ Less

Submitted 19 June, 2014; originally announced June 2014.

Comments: 16 pages, 8 figures

MSC Class: 65C05; 65C30; 74F10

Numerical simulation of wetting phenomena by a meshfree particle method

Authors: Sudarshan Tiwari, Axel Klar, Steffen Hardt

Abstract: Simulations of wetting phenomena by a meshfree particle method are presented. The incompressible Navier-Stokes equations are used to model the two-phase flow. The continuous surface force model is used to incorporate the surface tension force. Chorin's projection method is applied to discretize the Navier-Stokes equations. The different fluid phases are identified by assigning different colors and… ▽ More Simulations of wetting phenomena by a meshfree particle method are presented. The incompressible Navier-Stokes equations are used to model the two-phase flow. The continuous surface force model is used to incorporate the surface tension force. Chorin's projection method is applied to discretize the Navier-Stokes equations. The different fluid phases are identified by assigning different colors and different material properties (density, viscosity) to the particles that remain unchanged throughout a simulation. Two-phase flow is captured by a one-fluid model via using weighted averages of the density and viscosity in a region around the fluid-fluid interface. The differential operators at each particle are computed from the surrounding cloud of particles with the help of the least-squares method. The numerical results are compared with specific analytical solutions, but also with previously considered test cases involving wetting of a container and sessile drops. A good overall agreement is found. △ Less

Submitted 18 June, 2014; originally announced June 2014.

Comments: 34 pages, 41 figures

Brownian dynamics of rigid particles in an incompressible fluctuating fluid by a meshfree method

Authors: Anamika Pandey, Steffen Hardt, Axel Klar, Sudarshan Tiwari

Abstract: A meshfree Lagrangian method for the fluctuating hydrodynamic equations (FHEs) with fluid-structure interactions is presented. Brownian motion of the particle is investigated by direct numerical simulation of the fluctuating hydrodynamic equations. In this framework a bidirectional coupling has been introduced between the fluctuating fluid and the solid object. The force governing the motion of th… ▽ More A meshfree Lagrangian method for the fluctuating hydrodynamic equations (FHEs) with fluid-structure interactions is presented. Brownian motion of the particle is investigated by direct numerical simulation of the fluctuating hydrodynamic equations. In this framework a bidirectional coupling has been introduced between the fluctuating fluid and the solid object. The force governing the motion of the solid object is solely due to the surrounding fluid particles. Since a meshfree formulation is used, the method can be extended to many real applications involving complex fluid flows. A three-dimensional implementation is presented. In particular, we observe the short and long-time behaviour of the velocity autocorrelation function (VACF) of Brownian particles and compare it with the analytical expression. Moreover, the Stokes-Einstein relation is reproduced to ensure the correct long-time behaviour of Brownian dynamics. △ Less

Submitted 14 December, 2015; v1 submitted 26 February, 2014; originally announced February 2014.

Comments: 24 pages, 2 figures

MSC Class: 60-XX; 65Cxx; 70-XX; (Primary) 70Exx; 76Rxx(Secondary)

Energy harvesting through gas dynamics in the free molecular flow regime between structured surfaces at different temperatures

Authors: Tobias Baier, Julia Dölger, Steffen Hardt

Abstract: For a gas confined between surfaces held at different temperatures the velocity distribution shows a significant deviation from the Maxwell distribution when the mean free path of the molecules is comparable to or larger than the channel dimensions. If one of the surfaces is suitably structured, this non-equilibrium distribution can be exploited for momentum transfer in tangential direction betwee… ▽ More For a gas confined between surfaces held at different temperatures the velocity distribution shows a significant deviation from the Maxwell distribution when the mean free path of the molecules is comparable to or larger than the channel dimensions. If one of the surfaces is suitably structured, this non-equilibrium distribution can be exploited for momentum transfer in tangential direction between the two surfaces. This opens up the possibility to extract work from the system which operates as a heat engine. Since both surfaces are held at constant temperatures, the mode of momentum transfer is different from thermal creep flow that has gained more attention so far. This situation is studied in the limit of free-molecular flow for the case that an unstructured surface is allowed to move tangentially with respect to a structured surface. Parameter studies are conducted, and configurations with maximum thermodynamic efficiency are identified. Overall, it is shown that significant efficiencies can be obtained by tangential momentum transfer between structured surfaces. △ Less

Submitted 6 May, 2014; v1 submitted 13 January, 2014; originally announced January 2014.

Journal ref: Phys. Rev. E 89, 053003 (2014)

Influence of the enclosed fluid on the flow over a microstructured surface in the Cassie state

Authors: Clarissa Schönecker, Tobias Baier, Steffen Hardt

Abstract: Analytical expressions for the flow field as well as for the effective slip length of a shear flow over a surface with periodic rectangular grooves are derived. The primary fluid is in the Cassie state with the grooves being filled with a secondary immiscible fluid. The coupling of both fluids is reflected in a locally varying slip distribution along the fluid-fluid interface, which models the eff… ▽ More Analytical expressions for the flow field as well as for the effective slip length of a shear flow over a surface with periodic rectangular grooves are derived. The primary fluid is in the Cassie state with the grooves being filled with a secondary immiscible fluid. The coupling of both fluids is reflected in a locally varying slip distribution along the fluid-fluid interface, which models the effect of the secondary fluid on the outer flow. The obtained closed-form analytical expressions for the flow field and effective slip length of the primary fluid explicitly contain the influence of the viscosities of the two fluids as well as the magnitude of the local slip, which is a function of the surface geometry. They agree well with results from numerical computations of the full geometry. The analytical expressions allow investigating the influence of the viscous stresses inside the secondary fluid for arbitrary geometries of the rectangular grooves. For classic superhydrophobic surfaces, the deviations in the effective slip length compared to the case of inviscid gas flow are are pointed out. Another important finding with respect to an accurate modeling of flow over microstructured surfaces is that the local slip length of a grooved surface is anisotropic. △ Less

Submitted 27 November, 2013; originally announced November 2013.

Comments: submitted to the Journal of Fluid Mechanics

Flexible Interpretations: A Computational Model for Dynamic Uncertainty Assessment

Authors: Shohara L. Hardt

Abstract: The investigations reported in this paper center on the process of dynamic uncertainty assessment during interpretation tasks in real domain. In particular, we are interested here in the nature of the control structure of computer programs that can support multiple interpretation and smooth transitions between them, in real time. Each step of the processing involves the interpretation of one input… ▽ More The investigations reported in this paper center on the process of dynamic uncertainty assessment during interpretation tasks in real domain. In particular, we are interested here in the nature of the control structure of computer programs that can support multiple interpretation and smooth transitions between them, in real time. Each step of the processing involves the interpretation of one input item and the appropriate re-establishment of the system's confidence of the correctness of its interpretation(s). △ Less

Submitted 27 March, 2013; originally announced April 2013.

Comments: Appears in Proceedings of the Second Conference on Uncertainty in Artificial Intelligence (UAI1986)

Report number: UAI-P-1986-PG-109-114

Flow and streaming potential of an electrolyte in a channel with an axial temperature gradient

Authors: Mathias Dietzel, Steffen Hardt

Abstract: The effect of an axial temperature gradient on the flow profile and the induced streaming potential of a pressure-driven symmetric electrolyte in a slit channel is investigated. Based on the non-isothermal Nernst-Planck equations as well as the Poisson equation in the lubrication approximation, expressions for the ion distribution in the electric double layer (EDL) are derived. It is found that th… ▽ More The effect of an axial temperature gradient on the flow profile and the induced streaming potential of a pressure-driven symmetric electrolyte in a slit channel is investigated. Based on the non-isothermal Nernst-Planck equations as well as the Poisson equation in the lubrication approximation, expressions for the ion distribution in the electric double layer (EDL) are derived. It is found that thermophoretic ion motion and a temperature-dependent electrophoretic ion mobility increase the local EDL thickness with temperature, whereas a temperature-dependent permittivity shrinks the EDL. Within the Debye-Hückel approximation, the Navier-Stokes equation with the corresponding electric body force terms is solved. Analytical expressions for the flow profile and the induced (streaming) field under non-isothermal conditions are derived. It is shown that for such a situation the induced electric field is the linear superposition of at least seven individual contributions. For very wide channels, only the thermoelectric field typically present in bulk electrolytes when subjected to a temperature gradient (Soret equilibrium) as well as the conventional pressure-induced streaming field are of importance. Under extreme confinement, selective thermo-electro-migration driven by the interplay between the temperature-dependent electrophoretic ion mobility and the interaction of the ions with the surface wall charge causes a thermoelectric field of non-advective origin. For wider channels and besides the well-known thermoosmosis due to the temperature dependence of the dielectric permittivity, it is demonstrated that a temperature gradient renders the ion cloud in the EDL out of mechanical equilibrium. This leads to a thermoosmotic flow, and the ion advection affiliated with it may induce a thermoelectric field of similar order of magnitude as the one caused by more conventional thermal effects. △ Less

Submitted 24 June, 2020; v1 submitted 21 March, 2013; originally announced March 2013.

Comments: 48 pages, 7 figures

Propulsion Mechanisms for Leidenfrost Solids on Ratchets

Authors: Tobias Baier, Guillaume Dupeux, Stefan Herbert, Steffen Hardt, David Quere

Abstract: We propose a model for the propulsion of Leidenfrost solids on ratchets based on viscous drag due to the flow of evaporating vapor. The model assumes pressure-driven flow described by the Navier-Stokes equations and is mainly studied in lubrication approximation. A scaling expression is derived for the dependence of the propulsive force on geometric parameters of the ratchet surface and properties… ▽ More We propose a model for the propulsion of Leidenfrost solids on ratchets based on viscous drag due to the flow of evaporating vapor. The model assumes pressure-driven flow described by the Navier-Stokes equations and is mainly studied in lubrication approximation. A scaling expression is derived for the dependence of the propulsive force on geometric parameters of the ratchet surface and properties of the sublimating solid. We show that the model results as well as the scaling law compare favorably with experiments and are able to reproduce the experimentally observed scaling with the size of the solid. △ Less

Submitted 18 February, 2013; v1 submitted 28 August, 2012; originally announced August 2012.

Journal ref: Phys. Rev. E 87, 021001(R) (2013)

Thermally-driven flows between a Leidenfrost solid and a ratchet surface

Authors: Steffen Hardt, Sudarshan Tiwari, Tobias Baier

Abstract: The significance of thermally-driven flows for the propulsion of Leidenfrost solids on a ratchet surface is studied based on a numerical solution of the Boltzmann equation. In contrast to a previous analysis, it is found that no significant thermal creep flow is established. Instead, the flow pattern is dominated by thermal edge and thermal-stress slip flow, the latter being directed opposite to t… ▽ More The significance of thermally-driven flows for the propulsion of Leidenfrost solids on a ratchet surface is studied based on a numerical solution of the Boltzmann equation. In contrast to a previous analysis, it is found that no significant thermal creep flow is established. Instead, the flow pattern is dominated by thermal edge and thermal-stress slip flow, the latter being directed opposite to thermal creep flow. However, in total thermally-induced flows only make a minor contribution to the propulsion of Leidenfrost solids on ratchet surfaces which is dominated by the pressure-driven flow due to the sublimating solid. △ Less

Submitted 28 August, 2012; originally announced August 2012.

Electric double layer structure close to the three-phase contact line in an electrolyte wetting a solid substrate

Authors: Aaron Dörr, Steffen Hardt

Abstract: The electric double layer structure in an electrolyte close to a solid substrate near the three-phase contact line is approximated by considering the linearized Poisson-Boltzmann equation in a wedge geometry. The mathematical approach complements the semi-analytical solutions reported in the literature by providing easily available characteristic information on the double layer structure. In parti… ▽ More The electric double layer structure in an electrolyte close to a solid substrate near the three-phase contact line is approximated by considering the linearized Poisson-Boltzmann equation in a wedge geometry. The mathematical approach complements the semi-analytical solutions reported in the literature by providing easily available characteristic information on the double layer structure. In particular, the model contains a length scale that quantifies the distance from the fluid-fluid interface over which this boundary influences the electric double layer. The analysis is based on an approximation for the equipotential lines. Excellent agreement between the model predictions and numerical results is achieved for a significant range of contact angles. The length scale quantifying the influence of the fluid-fluid interface is proportional to the Debye length and depends on the wall contact angle. It is shown that for contact angles approaching 90° there is a finite range of boundary influence. △ Less

Submitted 31 August, 2012; v1 submitted 27 June, 2012; originally announced June 2012.

Comments: 6 pages, 9 figures; http://link.aps.org/doi/10.1103/PhysRevE.86.022601

Journal ref: Phys. Rev. E 86, 022601 (2012)

Longitudinal and transversal flow over a cavity containing a second immiscible fluid

Authors: Clarissa Schönecker, Steffen Hardt

Abstract: An analytical solution for the flow field of a shear flow over a rectangular cavity containing a second immiscible fluid is derived. While flow of a single-phase fluid over a cavity is a standard case investigated in fluid dynamics, flow over a cavity which is filled with a second immiscible fluid, has received little attention. The flow filed inside the cavity is considered to define a boundary c… ▽ More An analytical solution for the flow field of a shear flow over a rectangular cavity containing a second immiscible fluid is derived. While flow of a single-phase fluid over a cavity is a standard case investigated in fluid dynamics, flow over a cavity which is filled with a second immiscible fluid, has received little attention. The flow filed inside the cavity is considered to define a boundary condition for the outer flow which takes the form of a Navier slip condition with locally varying slip length. The slip-length function is determined from the related problem of lid-driven cavity flow. Based on the Stokes equations and complex analysis it is then possible to derive a closed analytical expression for the flow field over the cavity for both the transversal and the longitudinal case. The result is a comparatively simple function, which displays the dependence of the flow field on the cavity geometry and the medium filling the cavity. The analytically computed flow field agrees well with results obtained from a numerical solution of the Navier-Stokes equations. The studies presented in this article are of considerable practical relevance, for example for the flow over superhydrophobic surfaces. △ Less

Submitted 26 June, 2012; originally announced June 2012.

Comments: http://journals.cambridge.org

Journal ref: JFM 717, 376 - 394, 2013

Sample dispersion in isotachophoresis with Poiseuille counterflow

Authors: Somnath Bhattacharyya, Partha P. Gopmandal, Tobias Baier, Steffen Hardt

Abstract: A particular mode of isotachophoresis (ITP) employs a pressure-driven flow opposite to the sample electromigration direction in order to anchor a sample zone at a specific position along a channel or capillary. We investigate this situation using a two-dimensional finite-volume model based on the Nernst-Planck equation. The imposed Poiseuille flow profile leads to a significant dispersion of the s… ▽ More A particular mode of isotachophoresis (ITP) employs a pressure-driven flow opposite to the sample electromigration direction in order to anchor a sample zone at a specific position along a channel or capillary. We investigate this situation using a two-dimensional finite-volume model based on the Nernst-Planck equation. The imposed Poiseuille flow profile leads to a significant dispersion of the sample zone. This effect is detrimental for the resolution in analytical applications of ITP. We investigate the impact of convective dispersion, characterized by the area-averaged width of a sample zone, for various values of the sample Péclet-number, as well as the relative mobilities of the sample and the adjacent electrolytes. A one-dimensional model for the area-averaged concentrations based on a Taylor-Aris-type effective axial diffusivity is shown to yield good agreement with the finite-volume calculations. This justifies the use of such simple models and opens the door for the rapid simulation of ITP protocols with Poiseuille counterflow. △ Less

Submitted 15 January, 2013; v1 submitted 8 June, 2012; originally announced June 2012.

Journal ref: Phys. Fluids 25, 022001 (2013)

Simulation of a moving liquid droplet inside a rarefied gas region

Authors: Sudarshan Tiwari, Axel Klar, Steffen Hardt

Abstract: We study the dynamics of a liquid droplet inside a gas over a large range of the Knudsen numbers. The moving liquid droplet is modeled by the incompressible Navier-Stokes equations, the surrounding rarefied gas by the Boltzmann equation. The interface boundary conditions between the gas and liquid phases are derived. The incompressible Navier-Stokes equations are solved by a meshfree Lagrangian pa… ▽ More We study the dynamics of a liquid droplet inside a gas over a large range of the Knudsen numbers. The moving liquid droplet is modeled by the incompressible Navier-Stokes equations, the surrounding rarefied gas by the Boltzmann equation. The interface boundary conditions between the gas and liquid phases are derived. The incompressible Navier-Stokes equations are solved by a meshfree Lagrangian particle method called Finite Pointset Method (FPM), and the Boltzmann equation by a DSMC type of particle method. To validiate the coupled solutions of the Boltzmann and the incompressible Navier-Stokes equations we have further solved the compressible and the incompressible Navier-Stokes equations in the gas and liquid phases, respectively. In the latter case both the compressible and the incompressible Navier-Stokes equations are also solved by the FPM. In the continuum regime the coupled solutions obtained from the Boltzmann and the incompressible Navier-Stokes equations match with the solutions obtained from the compressible and the incompressible Navier-Stokes equations. In this paper, we presented solutions in one-dimensional physical space. △ Less

Submitted 14 February, 2012; originally announced February 2012.

Non-equilibrium electric double layers at the interface between two electrolytes

Authors: Steffen Hardt, Tobias Baier

Abstract: The charge distribution at the interface between two electrolytes is studied for the case of non-vanishing ion fluxes. The analysis is an extension of the established Verwey-Niessen theory to non-equilibrium situations. Applying matched asymptotic expansions for the region of the electric double layer and the bulk electrolytes, analytical expressions for the ion concentrations and the electrostati… ▽ More The charge distribution at the interface between two electrolytes is studied for the case of non-vanishing ion fluxes. The analysis is an extension of the established Verwey-Niessen theory to non-equilibrium situations. Applying matched asymptotic expansions for the region of the electric double layer and the bulk electrolytes, analytical expressions for the ion concentrations and the electrostatic potential are derived. It is found that the electric double layer is surprisingly stable. Even in cases where the applied electric field is so strong that it completely cancels the field of the charge clouds at the interface, two opposing space charge regions are formed. This phenomenon is qualitatively explained using a simple model incorporating ion partitioning and diffusive ion transport. Another notable phenomenon is that the interface acquires a net charge in the presence of an applied electric field, being of relevance for the hydrodynamic stability of interfacial flows. △ Less

Submitted 2 May, 2011; originally announced May 2011.

Momentum and Mass Fluxes in a Gas Confined between Periodically Structured Surfaces at Different Temperatures

Authors: A. A. Donkov, Sudarshan Tiwari, Tengfei Liang, Steffen Hardt, Axel Klar, Wen**g Ye

Abstract: It is well known that in a gas-filled duct or channel along which a temperature gradient is applied, a thermal creep flow is created. Here we show that a mass and momentum flux can also be induced in a gas confined between two parallel structured surfaces at different temperatures, i.e. \textit{orthogonal} to the temperature gradient. We use both analytical and numerical methods to compute the res… ▽ More It is well known that in a gas-filled duct or channel along which a temperature gradient is applied, a thermal creep flow is created. Here we show that a mass and momentum flux can also be induced in a gas confined between two parallel structured surfaces at different temperatures, i.e. \textit{orthogonal} to the temperature gradient. We use both analytical and numerical methods to compute the resulting fluxes. The momentum flux assumes its maximum value in the free-molecular flow regime, the (normalized) mass flux in the transition flow regime. The discovered phenomena could find applications in novel methods for energy-conversion and thermal pum** of gases. △ Less

Submitted 19 July, 2011; v1 submitted 1 March, 2011; originally announced March 2011.

Comments: 6 pages, 5 figures, updated fig.5, updated text for the numerical method

Journal ref: Phys. Rev. E 84, 016304 (2011); "Copyright (2011) by the American Physical Society."

Thermocapillary Flow on Superhydrophobic Surfaces

Authors: Tobias Baier, Clarissa Steffes, Steffen Hardt

Abstract: A liquid in Cassie-Baxter state above a structured superhydrophobic surface is ideally suited for surface driven transport due to its large free surface fraction in close contact to a solid. We investigate thermal Marangoni flow over a superhydrophobic array of fins oriented parallel or perpendicular to an applied temperature gradient. In the Stokes limit we derive an analytical expression for the… ▽ More A liquid in Cassie-Baxter state above a structured superhydrophobic surface is ideally suited for surface driven transport due to its large free surface fraction in close contact to a solid. We investigate thermal Marangoni flow over a superhydrophobic array of fins oriented parallel or perpendicular to an applied temperature gradient. In the Stokes limit we derive an analytical expression for the bulk flow velocity above the surface and compare it with numerical solutions of the Navier-Stokes equation. Even for moderate temperature gradients comparatively large flow velocities are induced, suggesting to utilize this principle for microfluidic pum**. △ Less

Submitted 22 March, 2010; originally announced March 2010.

Comments: 4 pages, 4 figures

Journal ref: Phys. Rev. E 82, 037301 (2010)

Momentum Transfer to Nanoobjects between Parallel Heated Plates

Authors: Steffen Hardt, Sudarshan Tiwari, Axel Klar

Abstract: A small-scale, trapezoidal rigid body in the gas-filled gap between two parallel plates at different temperatures is considered. An analytical expression for the force onto the body in the direction parallel to the plates valid for an infinite Knudsen number is derived. Simultaneously, Monte-Carlo simulations are performed allowing to extend the analysis to Knudsen numbers of the order of one. T… ▽ More A small-scale, trapezoidal rigid body in the gas-filled gap between two parallel plates at different temperatures is considered. An analytical expression for the force onto the body in the direction parallel to the plates valid for an infinite Knudsen number is derived. Simultaneously, Monte-Carlo simulations are performed allowing to extend the analysis to Knudsen numbers of the order of one. The numerical and the analytical results show excellent agreement, indicating that a temperature gradient orthogonal to the plates can induce a significant force in parallel direction. This force is only slightly reduced when a Knudsen number of one is considered. In the future, the discovered effect may be exploited for the conversion of thermal into mechanical energy in nanomachines. △ Less

Submitted 11 May, 2007; originally announced May 2007.

Comments: 11 pages, figures included

RPA-Approach to the Excitations of the Nucleon, Part II: Phenomenology

Authors: S. Hardt, J. Geiss, H. Lenske, U. Mosel

Abstract: The tensor-RPA approach developed previously in part I is applied to the Nambu-Jona-Lasinio (NJL) model. As a first step we investigate the structure of Dirac-Hartree-Fock solutions for a rotationally and isospin invariant ground-state density. Whereas vacuum properties can be reproduced, no solitonic configuration for a system with unit baryon number is found. We then solve the tensor-RPA equat… ▽ More The tensor-RPA approach developed previously in part I is applied to the Nambu-Jona-Lasinio (NJL) model. As a first step we investigate the structure of Dirac-Hartree-Fock solutions for a rotationally and isospin invariant ground-state density. Whereas vacuum properties can be reproduced, no solitonic configuration for a system with unit baryon number is found. We then solve the tensor-RPA equation employing simple models of the nucleon ground state. In general the ph interaction effects a decrease of the excited states to lower energies. Due to an enhanced level density at low energies the obtained spectra cannot be matched with the experimental data when a standard MIT-bag configuration is used. However, when the size of the nucleon quark core is reduced to approximately 0.3 fm a fair description of the baryon spectrum in the positive-parity channel is achieved. For this purpose the residual interaction turns out to be crucial and leads to a significant improvement compared with the mean-field spectra. △ Less

Submitted 2 July, 1997; v1 submitted 21 October, 1996; originally announced October 1996.

Comments: 33 pages, Latex, 9 Postscpript figures, section on the excited states has been completely rewritten after error was detected, results are now much more encouraging

Report number: UGI-96-23

Journal ref: Nucl.Phys. A627 (1997) 427-459

RPA-Approach to the Excitations of the Nucleon, Part I: Theory

Authors: S. Hardt, J. Geiss, H. Lenske, U. Mosel

Abstract: In this paper we develop a theoretical framework which allows us to study excitations of the nucleon. Assuming an effective two-body interaction as a model for low-energy QCD, we derive a relativistic TDHF equation for a many-body system of quarks. To render the Dirac-sea contribution tothe mean field finite, we introduce a symmetry conserving regularization scheme. In the small amplitude limit… ▽ More In this paper we develop a theoretical framework which allows us to study excitations of the nucleon. Assuming an effective two-body interaction as a model for low-energy QCD, we derive a relativistic TDHF equation for a many-body system of quarks. To render the Dirac-sea contribution tothe mean field finite, we introduce a symmetry conserving regularization scheme. In the small amplitude limit we derive an RPA equation. The structure of the $ph$ interaction and modifications due to the regularization scheme are discussed. We give a prescription to obtain a nucleon state with good angular momentum (J) and isospin (T) quantum numbers on mean-field level. To study excitations, we develop a tensor-RPA approach, which is an extension of the conventional RPA techniques to systems with a nonscalar ground state. This allows us to construct excited states with good (J/T) quantum numbers. We discuss a method to reduce the overcomplete $ph$-space and compute the tensor-RPA interaction matrix elements. Finally we extend our scheme to include ({3/2}^+, {3/2})-states. △ Less

Submitted 21 November, 1996; v1 submitted 14 May, 1996; originally announced May 1996.

Comments: Minor changes

Journal ref: Nucl.Phys. A627 (1997) 391-426

RPA Description of the Electric Polarizability of the Nucleon

Authors: J. Geiss, S. Hardt, H. Lenske, U. Mosel

Abstract: Excited states of the nucleon are described as RPA configurations on a mean--field ground state taken from the MIT bag model. A residual interaction of a structure as in the Nambu--Jona--Lasinio model is used. The particle-hole states are coupled to good total angular momentum and isospin. Valence excitations of particle-hole type and quark--antiquark ($q\overline{q}$) states from the Dirac--sea… ▽ More Excited states of the nucleon are described as RPA configurations on a mean--field ground state taken from the MIT bag model. A residual interaction of a structure as in the Nambu--Jona--Lasinio model is used. The particle-hole states are coupled to good total angular momentum and isospin. Valence excitations of particle-hole type and quark--antiquark ($q\overline{q}$) states from the Dirac--sea are included. The dependence of the baryon spectrum and multipole response functions on the coupling constant $G$ is studied. At critical values of $G$ the 3q--ground state becomes degenerate with strongly collective $q\overline{q}$ modes. The model is used to calculate the electric polarizability of the neutron $α_N$. Without residual interaction $α_N=7\cdot 10^{-4}fm^3$ is found. With residual interaction the value increases to $α_N=(7-11)\cdot 10^{-4}fm^3$. The measured value of $α_N$ is reproduced within experimental error bars. △ Less

Submitted 28 November, 1995; originally announced November 1995.

Comments: LaTeX, 19 pages, 2 figures

Journal ref: Z.Phys. A356 (1996) 99-106