-
Socially Intelligent Interfaces for Increased Energy Awareness in the Home
Authors:
Jussi Karlgren,
Lennart E. Fahlén,
Anders Wallberg,
Pär Hansson,
Olov Ståhl,
Jonas Söderberg,
Karl-Petter Åkesson
Abstract:
This paper describes how home appliances might be enhanced to improve user awareness of energy usage. Households wish to lead comfortable and manageable lives. Balancing this reasonable desire with the environmental and political goal of reducing electricity usage is a challenge that we claim is best met through the design of interfaces that allows users better control of their usage and unobtrusi…
▽ More
This paper describes how home appliances might be enhanced to improve user awareness of energy usage. Households wish to lead comfortable and manageable lives. Balancing this reasonable desire with the environmental and political goal of reducing electricity usage is a challenge that we claim is best met through the design of interfaces that allows users better control of their usage and unobtrusively informs them of the actions of their peers. A set of design principles along these lines is formulated in this paper. We have built a fully functional prototype home appliance with a socially aware interface to signal the aggregate usage of the users peer group according to these principles, and present the prototype in the paper.
△ Less
Submitted 29 June, 2021;
originally announced June 2021.
-
The ATLAS b-Jet Trigger
Authors:
Per Hansson
Abstract:
The online event selection is crucial to reject most of the events containing uninteresting background collisions while preserving as much as possible the interesting physical signals. The b-jet selection is part of the trigger strategy of the ATLAS experiment and a set of dedicated triggers was contributing to the event selection for the 2011 running. The b-jets acceptance is increased and the ba…
▽ More
The online event selection is crucial to reject most of the events containing uninteresting background collisions while preserving as much as possible the interesting physical signals. The b-jet selection is part of the trigger strategy of the ATLAS experiment and a set of dedicated triggers was contributing to the event selection for the 2011 running. The b-jets acceptance is increased and the background reduced by lowering jet transverse energy thresholds at the first trigger level and applying b-tagging techniques at the subsequent levels. Different physics channels, especially topologies containing more than one b-jet where higher rejection factors are achieved, benefit from using the b-jet trigger. An overview of the b-jet trigger menu and performance on data is presented.
△ Less
Submitted 17 November, 2011;
originally announced November 2011.
-
Simplified Models for LHC New Physics Searches
Authors:
Daniele Alves,
Nima Arkani-Hamed,
Sanjay Arora,
Yang Bai,
Matthew Baumgart,
Joshua Berger,
Matthew Buckley,
Bart Butler,
Spencer Chang,
Hsin-Chia Cheng,
Clifford Cheung,
R. Sekhar Chivukula,
Won Sang Cho,
Randy Cotta,
Mariarosaria D'Alfonso,
Sonia El Hedri,
Rouven Essig,
Jared A. Evans,
Liam Fitzpatrick,
Patrick Fox,
Roberto Franceschini,
Ayres Freitas,
James S. Gainer,
Yuri Gershtein,
Richard Gray
, et al. (70 additional authors not shown)
Abstract:
This document proposes a collection of simplified models relevant to the design of new-physics searches at the LHC and the characterization of their results. Both ATLAS and CMS have already presented some results in terms of simplified models, and we encourage them to continue and expand this effort, which supplements both signature-based results and benchmark model interpretations. A simplified m…
▽ More
This document proposes a collection of simplified models relevant to the design of new-physics searches at the LHC and the characterization of their results. Both ATLAS and CMS have already presented some results in terms of simplified models, and we encourage them to continue and expand this effort, which supplements both signature-based results and benchmark model interpretations. A simplified model is defined by an effective Lagrangian describing the interactions of a small number of new particles. Simplified models can equally well be described by a small number of masses and cross-sections. These parameters are directly related to collider physics observables, making simplified models a particularly effective framework for evaluating searches and a useful starting point for characterizing positive signals of new physics. This document serves as an official summary of the results from the "Topologies for Early LHC Searches" workshop, held at SLAC in September of 2010, the purpose of which was to develop a set of representative models that can be used to cover all relevant phase space in experimental searches. Particular emphasis is placed on searches relevant for the first ~50-500 pb-1 of data and those motivated by supersymmetric models. This note largely summarizes material posted at http://lhcnewphysics.org/, which includes simplified model definitions, Monte Carlo material, and supporting contacts within the theory community. We also comment on future developments that may be useful as more data is gathered and analyzed by the experiments.
△ Less
Submitted 13 May, 2011;
originally announced May 2011.
-
Test Beam Results of 3D Silicon Pixel Sensors for the ATLAS upgrade
Authors:
ATLAS 3D Collaboration,
P. Grenier,
G. Alimonti,
M. Barbero,
R. Bates,
E. Bolle,
M. Borri,
M. Boscardin,
C. Buttar,
M. Capua,
M. Cavalli-Sforza,
M. Cobal,
A. Cristofoli,
G-F. Dalla Betta,
G. Darbo,
C. Da Vià,
E. Devetak,
B. DeWilde,
B. Di Girolamo,
D. Dobos,
K. Einsweiler,
D. Esseni,
S. Fazio,
C. Fleta,
J. Freestone
, et al. (68 additional authors not shown)
Abstract:
Results on beam tests of 3D silicon pixel sensors aimed at the ATLAS Insertable-B-Layer and High Luminosity LHC (HL-LHC)) upgrades are presented. Measurements include charge collection, tracking efficiency and charge sharing between pixel cells, as a function of track incident angle, and were performed with and without a 1.6 T magnetic field oriented as the ATLAS Inner Detector solenoid field. Sen…
▽ More
Results on beam tests of 3D silicon pixel sensors aimed at the ATLAS Insertable-B-Layer and High Luminosity LHC (HL-LHC)) upgrades are presented. Measurements include charge collection, tracking efficiency and charge sharing between pixel cells, as a function of track incident angle, and were performed with and without a 1.6 T magnetic field oriented as the ATLAS Inner Detector solenoid field. Sensors were bump bonded to the front-end chip currently used in the ATLAS pixel detector. Full 3D sensors, with electrodes penetrating through the entire wafer thickness and active edge, and double-sided 3D sensors with partially overlap** bias and read-out electrodes were tested and showed comparable performance.
△ Less
Submitted 21 January, 2011;
originally announced January 2011.
-
Preliminary results of 3D-DDTC pixel detectors for the ATLAS upgrade
Authors:
A. La Rosa,
M. Boscardin,
G. -F. Dalla Betta,
G. Darbo,
C. Gemme,
H. Pernegger,
C. Piemonte,
M. Povoli,
S. Ronchin,
A. Zoboli,
N. Zorzi,
E. Bolle,
M. Borri,
C. Da Via,
S. Dong,
S. Fazio,
P. Grenier,
S. Grinstein,
H. Gjersdal,
P. Hansson,
F. Huegging,
P. Jackson,
M. Kocian,
F. Rivero,
O. Rohne
, et al. (7 additional authors not shown)
Abstract:
3D Silicon sensors fabricated at FBK-irst with the Double-side Double Type Column (DDTC) approach and columnar electrodes only partially etched through p-type substrates were tested in laboratory and in a 1.35 Tesla magnetic field with a 180GeV pion beam at CERN SPS. The substrate thickness of the sensors is about 200um, and different column depths are available, with overlaps between junction c…
▽ More
3D Silicon sensors fabricated at FBK-irst with the Double-side Double Type Column (DDTC) approach and columnar electrodes only partially etched through p-type substrates were tested in laboratory and in a 1.35 Tesla magnetic field with a 180GeV pion beam at CERN SPS. The substrate thickness of the sensors is about 200um, and different column depths are available, with overlaps between junction columns (etched from the front side) and ohmic columns (etched from the back side) in the range from 110um to 150um. The devices under test were bump bonded to the ATLAS Pixel readout chip (FEI3) at SELEX SI (Rome, Italy). We report leakage current and noise measurements, results of functional tests with Am241 gamma-ray sources, charge collection tests with Sr90 beta-source and an overview of preliminary results from the CERN beam test.
△ Less
Submitted 20 October, 2009;
originally announced October 2009.
-
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
Authors:
The ATLAS Collaboration,
G. Aad,
E. Abat,
B. Abbott,
J. Abdallah,
A. A. Abdelalim,
A. Abdesselam,
O. Abdinov,
B. Abi,
M. Abolins,
H. Abramowicz,
B. S. Acharya,
D. L. Adams,
T. N. Addy,
C. Adorisio,
P. Adragna,
T. Adye,
J. A. Aguilar-Saavedra,
M. Aharrouche,
S. P. Ahlen,
F. Ahles,
A. Ahmad,
H. Ahmed,
G. Aielli,
T. Akdogan
, et al. (2587 additional authors not shown)
Abstract:
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on…
▽ More
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.
△ Less
Submitted 14 August, 2009; v1 submitted 28 December, 2008;
originally announced January 2009.
-
First determination of the electric charge of the top quark
Authors:
Per Hansson
Abstract:
In this thesis, the first determination of the electric charge of the top quark is presented using 370pb-1 of data recorded by the D0 detector at the Fermilab Tevatron accelerator. ttbar events are selected with one isolated electron or muon and at least four jets out of which two are b-tagged by reconstruction of a secondary decay vertex (SVT). The method is based on the discrimination between…
▽ More
In this thesis, the first determination of the electric charge of the top quark is presented using 370pb-1 of data recorded by the D0 detector at the Fermilab Tevatron accelerator. ttbar events are selected with one isolated electron or muon and at least four jets out of which two are b-tagged by reconstruction of a secondary decay vertex (SVT). The method is based on the discrimination between b- and bbar-quark jets using a jet charge algorithm applied to SVT-tagged jets. A method to calibrate the jet charge algorithm with data is developed. A constrained kinematic fit is performed to associate the W bosons to the correct b-quark jets in the event and extract the top quark electric charge. The data is in good agreement with the Standard Model top quark electric charge of 2e/3. The scenario where the selected sample is solely composed of an exotic quark Q with charge 4e/3 is excluded at 92% confidence level. Using a Bayesian approach, an upper limit on the fraction of exotic quarks rho < 0.80 at 90% confidence level is obtained.
△ Less
Submitted 1 February, 2007;
originally announced February 2007.
