-
Pyxis: A ground-based demonstrator for formation-flying optical interferometry
Authors:
Jonah T. Hansen,
Samuel Wade,
Michael J. Ireland,
Tony D. Travouillon,
Tiphaine Lagadec,
Nicholas Herrald,
Joice Mathew,
Stephanie Monty,
Adam D. Rains
Abstract:
In the past few years, there has been a resurgence in studies towards space-based optical/infrared interferometry, particularly with the vision to use the technique to discover and characterise temperate Earth-like exoplanets around solar analogues. One of the key technological leaps needed to make such a mission feasible is demonstrating that formation flying precision at the level needed for int…
▽ More
In the past few years, there has been a resurgence in studies towards space-based optical/infrared interferometry, particularly with the vision to use the technique to discover and characterise temperate Earth-like exoplanets around solar analogues. One of the key technological leaps needed to make such a mission feasible is demonstrating that formation flying precision at the level needed for interferometry is possible. Here, we present $\textit{Pyxis}$, a ground-based demonstrator for a future small satellite mission with the aim to demonstrate the precision metrology needed for space-based interferometry. We describe the science potential of such a ground-based instrument, and detail the various subsystems: three six-axis robots, a multi-stage metrology system, an integrated optics beam combiner and the control systems required for the necessary precision and stability. We end by looking towards the next stage of $\textit{Pyxis}$: a collection of small satellites in Earth orbit.
△ Less
Submitted 25 September, 2023; v1 submitted 14 July, 2023;
originally announced July 2023.
-
Large Interferometer For Exoplanets (LIFE): VII. Practical implementation of a five-telescope kernel-nulling beam combiner with a discussion on instrumental uncertainties and redundancy benefits
Authors:
Jonah T. Hansen,
Michael J. Ireland,
Romain Laugier,
the LIFE collaboration
Abstract:
(Abridged)
Context: In the previous paper in this series, we identified that a pentagonal arrangement of five telescopes, using a kernel-nulling beam combiner, shows notable advantages for some important performance metrics for a space-based mid-infrared nulling interferometer over several other considered configurations for the detection of Earth-like exoplanets around solar-type stars.
Aims:…
▽ More
(Abridged)
Context: In the previous paper in this series, we identified that a pentagonal arrangement of five telescopes, using a kernel-nulling beam combiner, shows notable advantages for some important performance metrics for a space-based mid-infrared nulling interferometer over several other considered configurations for the detection of Earth-like exoplanets around solar-type stars.
Aims: We aim to produce a physical implementation of a kernel-nulling beam combiner for such a configuration, as well as a discussion of systematic and stochastic errors associated with the instrument.
Methods: We developed a mathematical framework around a nulling beam combiner, and then used it along with a space interferometry simulator to identify the effects of systematic uncertainties.
Results: We find that errors in the beam combiner optics, systematic phase errors and the RMS fringe tracking errors result in instrument limited performance at $\sim$4-7 $μ$m, and zodiacal limited at $\gtrsim$10 $μ$m. Assuming a beam splitter reflectance error of $|ΔR| = 5\%$ and phase shift error of $Δφ= 3$ degrees, we find that the fringe tracking RMS should be kept to less than 3 nm in order to be photon limited, and the systematic piston error be less than 0.5 nm to be appropriately sensitive to planets with a contrast of 1$\times 10^{-7}$ over a 4-19 $μ$m bandpass. We also identify that the beam combiner design, with the inclusion of a well positioned shutter, provides an ability to produce robust kernel observables even if one or two collecting telescopes were to fail. The resulting four telescope combiner, when put into an X-array formation, results in a transmission map with a relative signal-to-noise ratio equivalent to 80% of the fully functioning X-array combiner.
△ Less
Submitted 9 January, 2023; v1 submitted 26 April, 2022;
originally announced April 2022.
-
Large Interferometer For Exoplanets (LIFE): IV. Ideal kernel-nulling array architectures for a space-based mid-infrared nulling interferometer
Authors:
Jonah T. Hansen,
Michael J. Ireland,
the LIFE Collaboration
Abstract:
Aims: Optical interferometry from space for the purpose of detecting and characterising exoplanets is seeing a revival, specifically from missions such as the proposed Large Interferometer For Exoplanets (LIFE). A default assumption since the design studies of Darwin and TPF-I has been that the Emma X-array configuration is the optimal architecture for this goal. Here, we examine whether new advan…
▽ More
Aims: Optical interferometry from space for the purpose of detecting and characterising exoplanets is seeing a revival, specifically from missions such as the proposed Large Interferometer For Exoplanets (LIFE). A default assumption since the design studies of Darwin and TPF-I has been that the Emma X-array configuration is the optimal architecture for this goal. Here, we examine whether new advances in the field of nulling interferometry, such as the concept of kernel nulling, challenge this assumption.
Methods: We develop a tool designed to derive the photon-limited signal to noise ratio of a large sample of simulated planets for different architecture configurations and beam combination schemes. We simulate four basic configurations: the double Bracewell/X-array, and kernel nullers with three, four and five telescopes respectively.
Results: We find that a configuration of five telescopes in a pentagonal shape, using a five aperture kernel nulling scheme, outperforms the X-array design in both search (finding more planets) and characterisation (obtaining better signal, faster) when total collecting area is conserved. This is especially the case when trying to detect Earth twins (temperate, rocky planets in the habitable zone), showing a 23% yield increase over the X-array. On average, we find that a five telescope design receives 1.2 times the signal over the X-array design.
Conclusions: With the results of this simulation, we conclude that the Emma X-array configuration may not be the best architecture choice for the upcoming LIFE mission, and that a five telescope design utilising kernel nulling concepts will likely provide better scientific return for the same collecting area, provided that technical solutions for the required achromatic phase shifts can be implemented.
△ Less
Submitted 15 June, 2022; v1 submitted 13 January, 2022;
originally announced January 2022.
-
Interferometric Beam Combination with a Triangular Tricoupler Photonic Chip
Authors:
Jonah T. Hansen,
Michael J. Ireland,
Andrew Ross-Adams,
Simon Gross,
Tiphaine Lagadec,
Tony Travouillon,
Joice Mathew
Abstract:
Beam combiners are important components of an optical/infrared astrophysical interferometer, with many variants as to how to optimally combine two or more beams of light to fringe-track and obtain the complex fringe visibility. One such method is the use of an integrated optics chip that can instantaneously provide the measurement of the visibility without temporal or spatial modulation of the opt…
▽ More
Beam combiners are important components of an optical/infrared astrophysical interferometer, with many variants as to how to optimally combine two or more beams of light to fringe-track and obtain the complex fringe visibility. One such method is the use of an integrated optics chip that can instantaneously provide the measurement of the visibility without temporal or spatial modulation of the optical path. Current asymmetric planar designs are complex, resulting in a throughput penalty, and so here we present developments into a three dimensional triangular tricoupler that can provide the required interferometric information with a simple design and only three outputs. Such a beam combiner is planned to be integrated into the upcoming $\textit{Pyxis}$ interferometer, where it can serve as a high-throughput beam combiner with a low size footprint. Results into the characterisation of such a coupler are presented, highlighting a throughput of 85$\pm$7% and a flux splitting ratio between 33:33:33 and 52:31:17 over a 20% bandpass. We also show the response of the chip to changes in optical path, obtaining an instantaneous complex visibility and group delay estimate at each input delay.
△ Less
Submitted 20 March, 2022; v1 submitted 9 December, 2021;
originally announced December 2021.
-
Confirming known planetary trends using a photometrically selected Kepler sample
Authors:
Jonah T. Hansen,
Luca Casagrande,
Michael J. Ireland,
Jane Lin
Abstract:
Statistical studies of exoplanets and the properties of their host stars have been critical to informing models of planet formation. Numerous trends have arisen in particular from the rich Kepler dataset, including that exoplanets are more likely to be found around stars with a high metallicity and the presence of a "gap" in the distribution of planetary radii at 1.9$R_\oplus$. Here we present a n…
▽ More
Statistical studies of exoplanets and the properties of their host stars have been critical to informing models of planet formation. Numerous trends have arisen in particular from the rich Kepler dataset, including that exoplanets are more likely to be found around stars with a high metallicity and the presence of a "gap" in the distribution of planetary radii at 1.9$R_\oplus$. Here we present a new analysis on the Kepler field, using the APOGEE spectroscopic survey to build a metallicity calibration based on Gaia, 2MASS and Stromgren photometry. This calibration, along with masses and radii derived from a Bayesian isochrone fitting algorithm, is used to test a number of these trends with unbiased, photometrically derived parameters, albeit with a smaller sample size in comparison to recent studies. We recover that planets are more frequently found around higher metallicity stars; over the entire sample, planetary frequencies are $0.88\pm0.12$ percent for [Fe/H]<0 and $1.37\pm0.16$ percent for [Fe/H]$\geq$0 but at two sigma we find that the size of exoplanets influences the strength of this trend. We also recover the planet radius gap, along with a slight positive correlation with stellar mass. We conclude that this method shows promise to derive robust statistics of exoplanets. We also remark that spectrophotometry from Gaia DR3 will have an effective resolution similar to narrow band filters and allow to overcome the small sample size inherent in this study.
△ Less
Submitted 9 December, 2020; v1 submitted 17 September, 2020;
originally announced September 2020.
-
Generation of nitrogen-vacancy ensembles in diamond for quantum sensors: Optimization and scalability of CVD processes
Authors:
Andrew M. Edmonds,
Connor A. Hart,
Matthew J. Turner,
Pierre-Olivier Colard,
Jennifer M. Schloss,
Kevin Olsson,
Raisa Trubko,
Matthew L. Markham,
Adam Rathmill,
Ben Horne-Smith,
Wilbur Lew,
Arul Manickam,
Scott Bruce,
Peter G. Kaup,
Jon C. Russo,
Michael J. DiMario,
Joseph T. South,
Jay T. Hansen,
Daniel J. Twitchen,
Ronald L. Walsworth
Abstract:
Ensembles of nitrogen-vacancy (NV) centers in diamond are a leading platform for practical quantum sensors. Reproducible and scalable fabrication of NV-ensembles with desired properties is crucial. This work addresses these challenges by develo** a chemical vapor deposition (CVD) synthesis process to produce diamond material at scale with improved NV-ensemble properties for a target NV density.…
▽ More
Ensembles of nitrogen-vacancy (NV) centers in diamond are a leading platform for practical quantum sensors. Reproducible and scalable fabrication of NV-ensembles with desired properties is crucial. This work addresses these challenges by develo** a chemical vapor deposition (CVD) synthesis process to produce diamond material at scale with improved NV-ensemble properties for a target NV density. The material reported in this work enables immediate sensitivity improvements for current devices. In addition, techniques established in this work for material and sensor characterization at different stages of the CVD synthesis process provide metrics for future efforts targeting other NV densities or sample geometries.
△ Less
Submitted 3 April, 2020;
originally announced April 2020.
-
A Linear Formation Flying Astronomical Interferometer in Low Earth Orbit
Authors:
Jonah T. Hansen,
Michael J. Ireland
Abstract:
Space interferometry is the inevitable endpoint of high angular resolution astrophysics, and a key technology that can be leveraged to analyse exoplanet formation and atmospheres with exceptional detail. However, the anticipated cost of large missions such as Darwin and TPF-I, and inadequate technology readiness levels have resulted in limited developments since the late 2000s. Here, we present a…
▽ More
Space interferometry is the inevitable endpoint of high angular resolution astrophysics, and a key technology that can be leveraged to analyse exoplanet formation and atmospheres with exceptional detail. However, the anticipated cost of large missions such as Darwin and TPF-I, and inadequate technology readiness levels have resulted in limited developments since the late 2000s. Here, we present a feasibility study into a small scale formation flying interferometric array in Low Earth Orbit, that will aim to prove the technical concepts involved with space interferometry while still making unique astrophysical measurements. We will detail the proposed system architecture and metrology system, as well as present orbital simulations that show that the array should be stable enough to perform interferometry with < 50m/s/year delta-v and one thruster per spacecraft. We also conduct observability simulations to identify which parts of the sky are visible for a given orbital configuration. We conclude with optimism that this design is achievable, but a more detailed control simulation factoring in a demonstrated metrology system is the next step to demonstrate full mission feasibility.
△ Less
Submitted 21 April, 2020; v1 submitted 4 December, 2019;
originally announced December 2019.
-
Chronostar: a novel Bayesian method for kinematic age determination. I. Derivation and application to the β Pictoris Moving Group
Authors:
Timothy D. Crundall,
Michael J. Ireland,
Mark R. Krumholz,
Christoph Federrath,
Maruša Žerjal,
Jonah T. Hansen
Abstract:
Gaia DR2 provides an unprecedented sample of stars with full 6D phase-space measurements, creating the need for a self-consistent means of discovering and characterising the phase-space overdensities known as moving groups or associations. Here we present Chronostar, a new Bayesian analysis tool that meets this need. Chronostar uses the Expectation-Maximisation algorithm to remove the circular dep…
▽ More
Gaia DR2 provides an unprecedented sample of stars with full 6D phase-space measurements, creating the need for a self-consistent means of discovering and characterising the phase-space overdensities known as moving groups or associations. Here we present Chronostar, a new Bayesian analysis tool that meets this need. Chronostar uses the Expectation-Maximisation algorithm to remove the circular dependency between association membership lists and fits to their phase-space distributions, making it possible to discover unknown associations within a kinematic data set. It uses forward-modelling of orbits through the Galactic potential to overcome the problem of tracing backward stars whose kinematics have significant observational errors, thereby providing reliable ages. In tests using synthetic data sets with realistic measurement errors and complex initial distributions, Chronostar successfully recovers membership assignments and kinematic ages up to ~ 100 Myr. In tests on real stellar kinematic data in the phase-space vicinity of the $β$ Pictoris Moving Group, Chronostar successfully rediscovers the association without any human intervention, identifies 15 new likely members, corroborates 43 candidate members, and returns a kinematic age of 17.8+-1.2 Myr. In the process we also rediscover the Tucana-Horologium Moving Group, for which we obtain a kinematic age of 36.3+1.3-1.4 Myr.
△ Less
Submitted 23 August, 2019; v1 submitted 20 February, 2019;
originally announced February 2019.
