-
Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators
Authors:
G. Ciovati,
J. Anderson,
S. Balachandran,
G. Cheng,
B. Coriton,
E. Daly,
P. Dhakal,
A. Gurevich,
F. Hannon,
K. Harding,
L. Holland,
F. Marhauser,
K. McLaughlin,
D. Packard,
T. Powers,
U. Pudasaini,
J. Rathke,
R. Rimmer,
T. Schultheiss,
H. Vennekate,
D. Vollmer
Abstract:
The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by therm…
▽ More
The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by thermal conduction at relevant accelerating gradients for use in accelerators. A possible use of conduction-cooled SRF linacs is for environmental applications, requiring electron beams with energy of $1 - 10$ MeV and 1 MW of power. We have designed a 915 MHz SRF linac for such an application and developed a prototype single-cell cavity to prove the proposed design by operating it with cryocoolers at the accelerating gradient required for 1 MeV energy gain. The cavity has a $\sim 3$ $μ$m thick Nb$_3$Sn film on the inner surface, deposited on a $\sim4$ mm thick bulk Nb substrate and a bulk $\sim7$ mm thick Cu outer shell with three Cu attachment tabs. The cavity was tested up to a peak surface magnetic field of 53 mT in liquid He at 4.3 K. A horizontal test cryostat was designed and built to test the cavity cooled with three Gifford-McMahon cryocoolers. The rf tests of the conduction-cooled cavity, performed at General Atomics, achieved a peak surface magnetic field of 50 mT and stable operation was possible with up to 18.5 W of rf heat load. The peak frequency shift due to microphonics was 23 Hz. These results represent the highest peak surface magnetic field achieved in a conduction-cooled SRF cavity to date and meet the requirements for a 1 MeV energy gain.
△ Less
Submitted 22 March, 2023; v1 submitted 14 February, 2023;
originally announced February 2023.
-
Photoinjector Generation of High-Charge Magnetized Beams for Electron-Cooling Applications
Authors:
A. Fetterman,
D. Mihalcea,
S. Benson,
D. Crawford,
D. Edstrom,
F. Hannon,
P. Piot,
J. Ruan,
S. Wang
Abstract:
Electron-cooling offers a relatively simple scheme to enable high-luminosity collisions in future electron-ion and hadron colliders. Contemplated TeV-energy hadron colliders require relativistic (sub 100 MeV) high-charge [${\cal O}(\mbox{nC})$] electron beams with a specific transverse eigenemittance partition. This paper discusses the generation of high-charge ($Q\le 3.2$~nC) 40 MeV electron bunc…
▽ More
Electron-cooling offers a relatively simple scheme to enable high-luminosity collisions in future electron-ion and hadron colliders. Contemplated TeV-energy hadron colliders require relativistic (sub 100 MeV) high-charge [${\cal O}(\mbox{nC})$] electron beams with a specific transverse eigenemittance partition. This paper discusses the generation of high-charge ($Q\le 3.2$~nC) 40 MeV electron bunches with eigenemittance partition consistent with requirements associated with electron-cooling option for future electron-ion colliders. The supporting experiment was performed at the FAST facility at FermiLab. The data are compared with numerical simulations and the results discussed in the context of beam requirement for future electron-ion colliders.
△ Less
Submitted 20 September, 2021;
originally announced September 2021.
-
Design of a cw, low energy, high power superconducting linac for environmental applications
Authors:
G. Ciovati,
J. Anderson,
B. Coriton,
J. Guo,
F. Hannon,
L. Holland,
M. LeSher,
F. Marhauser,
J. Rathke,
R. Rimmer,
T. Schultheiss,
V. Vylet
Abstract:
The treatment of flue gases from power plants and municipal or industrial wastewater using electron beam irradiation technology has been successfully demonstrated in small-scale pilot plants. The beam energy requirement is rather modest, on the order of a few MeV, however the adoption of the technology at an industrial scale requires the availability of high beam power, of the order of 1 MW, in a…
▽ More
The treatment of flue gases from power plants and municipal or industrial wastewater using electron beam irradiation technology has been successfully demonstrated in small-scale pilot plants. The beam energy requirement is rather modest, on the order of a few MeV, however the adoption of the technology at an industrial scale requires the availability of high beam power, of the order of 1 MW, in a cost effective way. In this article we present the design of a compact superconducting accelerator capable of delivering a cw electron beam with a current of 1 A and an energy of 1 MeV. The main components are an rf-gridded thermionic gun and a conduction cooled beta= 0.5 elliptical Nb3Sn cavity with dual coaxial power couplers. An engineering and cost analysis shows that the proposed design would result in a processing cost competitive with alternative treatment methods.
△ Less
Submitted 11 June, 2018; v1 submitted 22 February, 2018;
originally announced February 2018.
-
DarkLight: A Search for Dark Forces at the Jefferson Laboratory Free-Electron Laser Facility
Authors:
J. Balewski,
J. Bernauer,
W. Bertozzi,
J. Bessuille,
B. Buck,
R. Cowan,
K. Dow,
C. Epstein,
P. Fisher,
S. Gilad,
E. Ihloff,
Y. Kahn,
A. Kelleher,
J. Kelsey,
R. Milner,
C. Moran,
L. Ou,
R. Russell,
B. Schmookler,
J. Thaler,
C. Tschalär,
C. Vidal,
A. Winnebeck,
S. Benson,
C. Gould
, et al. (42 additional authors not shown)
Abstract:
We give a short overview of the DarkLight detector concept which is designed to search for a heavy photon A' with a mass in the range 10 MeV/c^2 < m(A') < 90 MeV/c^2 and which decays to lepton pairs. We describe the intended operating environment, the Jefferson Laboratory free electon laser, and a way to extend DarkLight's reach using A' --> invisible decays.
We give a short overview of the DarkLight detector concept which is designed to search for a heavy photon A' with a mass in the range 10 MeV/c^2 < m(A') < 90 MeV/c^2 and which decays to lepton pairs. We describe the intended operating environment, the Jefferson Laboratory free electon laser, and a way to extend DarkLight's reach using A' --> invisible decays.
△ Less
Submitted 19 July, 2013; v1 submitted 16 July, 2013;
originally announced July 2013.
-
Electron Sources for Future Lightsources, Summary and Conclusions for the Activities during FLS 2012
Authors:
Thorsten Kamps,
Carlos Hernandez-Garcia,
Chase Boulware,
John Corlett,
Katherine Harkay,
Fay Hannon,
Mikhail Krasilnikov,
Boris Militsyn,
Torsten Quast,
Fernando Sannibale,
Jochen Teichert
Abstract:
This paper summarizes the discussions, presentations, and activity of the Future Light Sources Workshop 2012 (FLS 2012) working group dedicated to Electron Sources. The focus of the working group was to discuss concepts and technologies that might enable much higher peak and average brightness from electron beam sources. Furthermore the working group was asked to consider methods to greatly improv…
▽ More
This paper summarizes the discussions, presentations, and activity of the Future Light Sources Workshop 2012 (FLS 2012) working group dedicated to Electron Sources. The focus of the working group was to discuss concepts and technologies that might enable much higher peak and average brightness from electron beam sources. Furthermore the working group was asked to consider methods to greatly improve the robustness of operation and lower the costs of providing electrons.
△ Less
Submitted 26 July, 2013; v1 submitted 5 July, 2013;
originally announced July 2013.
-
Benchmarking of 3D space charge codes using direct phase space measurements from photoemission high voltage DC gun
Authors:
Ivan V. Bazarov,
Bruce M. Dunham,
Colwyn Gulliford,
Yulin Li,
Xianghong Liu,
Charles K. Sinclair,
Ken Soong,
Fay Hannon
Abstract:
We present a comparison between space charge calculations and direct measurements of the transverse phase space for space charge dominated electron bunches after a high voltage photoemission DC gun followed by an emittance compensation solenoid magnet. The measurements were performed using a double-slit setup for a set of parameters such as charge per bunch and the solenoid current. The data is…
▽ More
We present a comparison between space charge calculations and direct measurements of the transverse phase space for space charge dominated electron bunches after a high voltage photoemission DC gun followed by an emittance compensation solenoid magnet. The measurements were performed using a double-slit setup for a set of parameters such as charge per bunch and the solenoid current. The data is compared with detailed simulations using 3D space charge codes GPT and Parmela3D with initial particle distributions created from the measured transverse and temporal laser profiles. Beam brightness as a function of beam fraction is calculated for the measured phase space maps and found to approach the theoretical maximum set by the thermal energy and accelerating field at the photocathode.
△ Less
Submitted 16 June, 2008;
originally announced June 2008.