-
Phase-stabilized UV light at 267 nm through twofold second harmonic generation
Authors:
Benjamin Kraus,
Fabian Dawel,
Stephan Hannig,
Johannes Kramer,
Constantin Nauk,
Piet O. Schmidt
Abstract:
Providing phase stable laser light is important to extend the interrogation time of optical clocks towards many seconds and thus achieve small statistical uncertainties. We report a laser system providing more than 50 uW phase-stabilized UV light at 267.4 nm for an aluminium ion optical clock. The light is generated by frequency-quadrupling a fibre laser at 1069.6 nm in two cascaded non-linear cry…
▽ More
Providing phase stable laser light is important to extend the interrogation time of optical clocks towards many seconds and thus achieve small statistical uncertainties. We report a laser system providing more than 50 uW phase-stabilized UV light at 267.4 nm for an aluminium ion optical clock. The light is generated by frequency-quadrupling a fibre laser at 1069.6 nm in two cascaded non-linear crystals, both in single-pass configuration. In the first stage, a 10 mm long PPLN waveguide crystal converts 1 W fundamental light to more than 0.2 W at 534.8 nm. In the following 50 mm long DKDP crystal, more than 50 uW of light at 267.4 nm are generated. An upper limit for the passive short-term phase stability has been measured by a beat-node measurement with an existing phase-stabilized quadrupling system employing the same source laser. The resulting fractional frequency instability of less than 5 x 10^-17 after 1 s supports lifetime-limited probing of the 27Al^+ clock transition, given a sufficiently stable laser source. A further improved stability of the fourth harmonic light is expected through interferometric path length stabilisation of the pump light by back-reflecting it through the entire setup and correcting for frequency deviations. The in-loop error signal indicates an electronically limited instability of 1 x 10^-18 at 1 s.
△ Less
Submitted 5 September, 2022;
originally announced September 2022.
-
A stable 2 W continuous-wave 261.5 nm laser for cooling and trap** aluminum monochloride
Authors:
J. C. Shaw,
S. Hannig,
D. J. McCarron
Abstract:
We present a high-power tunable deep-ultraviolet (DUV) laser that uses two consecutive cavity enhanced doubling stages with LBO and CLBO crystals to produce the fourth harmonic of an amplified homebuilt external cavity diode laser. The system generates up to 2.75 W of 261.5 nm laser light with a ~2 W stable steady-state output power and performs second harmonic generation in a largely unexplored h…
▽ More
We present a high-power tunable deep-ultraviolet (DUV) laser that uses two consecutive cavity enhanced doubling stages with LBO and CLBO crystals to produce the fourth harmonic of an amplified homebuilt external cavity diode laser. The system generates up to 2.75 W of 261.5 nm laser light with a ~2 W stable steady-state output power and performs second harmonic generation in a largely unexplored high intensity regime in CLBO for continuous wave DUV light. We use this laser to perform fluorescence spectroscopy on the $X^1Σ\leftarrow A^1Π$ transition in a cold, slow beam of AlCl molecules and probe the $A^{1} Π|v'=0,~J'=1>$ state hyperfine structure for future laser cooling and trap** experiments. This work demonstrates that the production of tunable, watt-level DUV lasers is becoming routine for a variety of wavelength-specific applications in atomic, molecular and optical physics.
△ Less
Submitted 2 September, 2021;
originally announced September 2021.
-
Towards a Transportable Aluminium Ion Quantum Logic Optical Clock
Authors:
S. Hannig,
L. Pelzer,
N. Scharnhorst,
J. Kramer,
M. Stepanova,
Z. T. Xu,
N. Spethmann,
I. D. Leroux,
T. E. Mehlstäubler,
P. O. Schmidt
Abstract:
With the advent of optical clocks featuring fractional frequency uncertainties on the order of $10^{-17}$ and below, new applications such as chronometric levelling with few-cm height resolution emerge. We are develo** a transportable optical clock based on a single trapped aluminium ion, which is interrogated via quantum logic spectroscopy. We employ singly-charged calcium as the logic ion for…
▽ More
With the advent of optical clocks featuring fractional frequency uncertainties on the order of $10^{-17}$ and below, new applications such as chronometric levelling with few-cm height resolution emerge. We are develo** a transportable optical clock based on a single trapped aluminium ion, which is interrogated via quantum logic spectroscopy. We employ singly-charged calcium as the logic ion for sympathetic cooling, state preparation and readout. Here we present a simple and compact physics and laser package for manipulation of $^{40}\mathrm{Ca}^+$. Important features are a segmented multi-layer trap with separate loading and probing zones, a compact titanium vacuum chamber, a near-diffraction-limited imaging system with high numerical aperture based on a single biaspheric lens, and an all-in-fiber $^{40}\mathrm{Ca}^+$ repump laser system. We present preliminary estimates of the trap-induced frequency shifts on $^{27}\mathrm{Al}^+$, derived from measurements with a single calcium ion. The micromotion-induced second-order Doppler shift for $^{27}\mathrm{Al}^+$ has been determined to be \sods and the black-body radiation shift is $δν_\mathrm{BBR}/ν=(-4.0\pm0.4)\times10^{-18}$. Moreover, heating rates of 30 (7) quanta per second at trap frequencies of $ω_\mathrm{rad,Ca+} \approx2π\times2.5\,\mathrm{MHz}$ ($ω_\mathrm{ax,Ca+} \approx2π\times1.5\,\mathrm{MHz}$) in radial (axial) direction have been measured, enabling interrogation times of a few hundreds of milliseconds.
△ Less
Submitted 14 May, 2019; v1 submitted 8 January, 2019;
originally announced January 2019.
-
A highly stable monolithic enhancement cavity for SHG generation in the UV
Authors:
S. Hannig,
J. Mielke,
J. A. Fenske,
M. Misera,
N. Beev,
C. Ospelkaus,
P. O. Schmidt
Abstract:
We present a highly stable bow-tie power enhancement cavity for critical second-harmonic generation into the UV using a Brewster-cut $β$-BaB$_2$O$_4$ (BBO) nonlinear crystal. The cavity geometry is suitable for all UV wavelengths reachable with BBO and can be modified to accommodate anti-reflection coated crystals, extending its applicability to the entire wavelength range accessible with non-line…
▽ More
We present a highly stable bow-tie power enhancement cavity for critical second-harmonic generation into the UV using a Brewster-cut $β$-BaB$_2$O$_4$ (BBO) nonlinear crystal. The cavity geometry is suitable for all UV wavelengths reachable with BBO and can be modified to accommodate anti-reflection coated crystals, extending its applicability to the entire wavelength range accessible with non-linear frequency conversion. The cavity is length-stabilized using a fast general purpose digital PI controller based on the open source STEMlab 125-14 (formerly Red Pitaya) system acting on a mirror mounted on a fast piezo actuator. We observe $130\,\mathrm{h}$ uninterrupted operation without decay in output power at $313\,\mathrm{nm}$. The robustness of the system has been confirmed by exposing it to accelerations of up to $1\,\mathrm{g}$ with less than $10\%$ in-lock output power variations. Furthermore, the cavity can withstand 30~minutes of acceleration exposure at a level of $3\,\mathrm{g}_\mathrm{rms}$ without substantial change in SHG output power, demonstrating that the design is suitable for transportable setups.
△ Less
Submitted 21 September, 2017;
originally announced September 2017.
-
On-Line Estimation of Local Oscillator Noise and Optimisation of Servo Parameters in Atomic Clocks
Authors:
Ian D. Leroux,
Nils Scharnhorst,
Stephan Hannig,
Johannes Kramer,
Lennart Pelzer,
Mariia Stepanova,
Piet O. Schmidt
Abstract:
For atomic frequency standards in which fluctuations of the local oscillator (LO) frequency are the dominant noise source, we examine the role of the servo algorithm that predicts and corrects these frequency fluctuations. We derive the optimal linear prediction algorithm, showing how to measure the relevant spectral properties of the noise and optimise servo parameters while the standard is runni…
▽ More
For atomic frequency standards in which fluctuations of the local oscillator (LO) frequency are the dominant noise source, we examine the role of the servo algorithm that predicts and corrects these frequency fluctuations. We derive the optimal linear prediction algorithm, showing how to measure the relevant spectral properties of the noise and optimise servo parameters while the standard is running, using only the atomic error signal. We find that, for realistic LO noise spectra, a conventional integrating servo with a properly chosen gain performs nearly as well as the optimal linear predictor. Using simple analytical models and numerical simulations, we establish optimum probe times as a function of clock atom number and of the dominant noise type in the local oscillator. We calculate the resulting LO-dependent scaling of achievable clock stability with atom number for product states as well as for maximally-correlated states.
△ Less
Submitted 11 April, 2017; v1 submitted 23 January, 2017;
originally announced January 2017.
-
High-bandwidth transfer of phase stability through a fiber frequency comb
Authors:
Nils Scharnhorst,
Jannes B. Wübbena,
Stephan Hannig,
Kornelius Jakobsen,
Johannes Kramer,
Ian D. Leroux,
Piet O. Schmidt
Abstract:
We demonstrate phase locking of a 729 nm diode laser to a 1542 nm master laser via an erbium-doped-fiber frequency comb, using a transfer-oscillator feedforward scheme which suppresses the effect of comb noise in an unprecedented 1.8 MHz bandwidth. We illustrate its performance by carrying out coherent manipulations of a trapped calcium ion with 99 % fidelity even at few-microsecond timescales. We…
▽ More
We demonstrate phase locking of a 729 nm diode laser to a 1542 nm master laser via an erbium-doped-fiber frequency comb, using a transfer-oscillator feedforward scheme which suppresses the effect of comb noise in an unprecedented 1.8 MHz bandwidth. We illustrate its performance by carrying out coherent manipulations of a trapped calcium ion with 99 % fidelity even at few-microsecond timescales. We thus demonstrate that transfer-oscillator locking can provide sufficient phase stability for high-fidelity quantum logic manipulation even without pre-stabilization of the slave diode laser.
△ Less
Submitted 30 June, 2015; v1 submitted 8 May, 2015;
originally announced May 2015.
