-
Improving single-molecule conductance measurements with change point detection from the econometrics toolbox
Authors:
Joseph M. Hamill,
William Bro-Jørgensen,
Zoltán Balogh,
Haixing Li,
Susanne Leitherer,
David Solomon,
András Halbritter,
Gemma Solomon
Abstract:
Structural breaks occur in timeseries data across a broad range of fields, from economics to nanosciences. For measurements of single-molecule break junctions, structural breaks in conductance versus displacement data occur when the molecular junction ruptures. This moment is significant because the molecule is likely in its most extended geometry, and therefore resembles most closely the geometry…
▽ More
Structural breaks occur in timeseries data across a broad range of fields, from economics to nanosciences. For measurements of single-molecule break junctions, structural breaks in conductance versus displacement data occur when the molecular junction ruptures. This moment is significant because the molecule is likely in its most extended geometry, and therefore resembles most closely the geometry used in theoretical predictions. Conventional single-molecule break junction data analysis, on the other hand, typically uses the entire molecular plateau to estimate the single-molecule conductance, which skews the estimate when the plateau is sloped. Borrowing from econometrics, where the study of structural breaks is well established, we present change point detection (CPD) as a tool to search for junction rupture in single-molecule break junction data, and improve estimates in single-molecule conductance. We demonstrate that using CPD instead of the conventional 1D conductance histogram to determine the mean molecular conductance yields a standard deviation in the estimate of typically half that of the conventional approach, greatly improving accuracy. We apply CPD to three separate data sets, two on 4,4'-bipyridine and one on a silane, two at room temperature and one at 4 K, two in one lab, one in another, to show the wide applicability of even the simplest of CPD algorithms: the Chow test. This versatility and better accuracy will propagate into more accurate theoretical simulations. These improved metrics, in turn, will further improve any downstream analyses, including all emerging machine learning approaches.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
Quantum Interference and Contact Effects in Thermoelectric Performance of Anthracene-Based Molecules
Authors:
Joseph M. Hamill,
Ali Ismael,
Alaa Al-Jobory,
Troy L. R. Bennett,
Maryam Alshahrani,
Xintai Wang,
Maxwell Akers-Douglas,
Luke A. Wilkinson,
Benjamin J. Robinson,
Nicholas J. Long,
Colin Lambert,
Tim Albrecht
Abstract:
We report on the single-molecule electronic and thermoelectric properties of strategically chosen anthracene-based molecules with anchor groups capable of binding to noble metal substrates, such as gold and platinum. Specifically, we study the effect of different anchor groups, as well as quantum interference, on the electric conductance and the thermopower of gold/single-molecule/gold junctions a…
▽ More
We report on the single-molecule electronic and thermoelectric properties of strategically chosen anthracene-based molecules with anchor groups capable of binding to noble metal substrates, such as gold and platinum. Specifically, we study the effect of different anchor groups, as well as quantum interference, on the electric conductance and the thermopower of gold/single-molecule/gold junctions and generally find good agreement between theory and experiment. All molecular junctions display transport characteristics consistent with coherent transport and a Fermi alignment approximately in the middle of the HOMO/LUMO gap. Single-molecule results are in agreement with previously reported thin-film data, further supporting the notion that molecular design considerations may be translated from the single- to the many-molecule devices. For combinations of anchor groups where one binds significantly more strongly to the electrodes than the other, the stronger anchor group appears to dominate the thermoelectric behaviour of the molecular junction. For other combinations, the choice of electrode material can determine the sign and magnitude of the thermopower. This finding has important implications for the design of thermoelectric generator devices, where both n- and p-type conductor are required for thermoelectric current generation.
△ Less
Submitted 31 October, 2022;
originally announced October 2022.
-
A multivariate approach to single-molecule thermopower and electric conductance measurements
Authors:
Joseph M. Hamill,
Christopher Weaver,
Tim Albrecht
Abstract:
We report a method using scanning tunnelling microscope single molecular break junction to simultaneously measure and correlate the single-molecule thermopower and electrical conductance. In contrast to previously reported approaches, it does not require custom-built electronics and takes advantage of a trace-by-trace calibration of the thermal offset at the Au/Au contact, thus greatly facilitatin…
▽ More
We report a method using scanning tunnelling microscope single molecular break junction to simultaneously measure and correlate the single-molecule thermopower and electrical conductance. In contrast to previously reported approaches, it does not require custom-built electronics and takes advantage of a trace-by-trace calibration of the thermal offset at the Au/Au contact, thus greatly facilitating thermoelectric measurements at the single-molecule level. We report measurements of three molecules: 1,4-di(4-(ethynyl(phenylthioacetate)) benzene, 1,8-octanedithiol, and 4,4'-bipyridine, and determine single-molecule Seebeck coefficients of 12(3), 5(2), and -5(2) microV K-1, respectively. Furthermore, the method statistically correlates the Seebeck voltage offset, electrical conductance, and stretching displacement of the single-molecule junction, and allows for direct comparison with current-distance spectroscopy results obtained at constant bias.
△ Less
Submitted 22 September, 2021;
originally announced September 2021.
-
Scale-up of room-temperature constructive quantum interference from single molecules to self-assembled molecular-electronic films
Authors:
Xintai Wang,
Troy L. R. Bennett,
Ali Ismael,
Luke A. Wilkinson,
Joseph Hamill,
Andrew J. P. White,
Iain M. Grace,
Tim Albrecht,
Benjamin J. Robinson,
Nicholas J. Long,
Lesley F. Cohen,
Colin J. Lambert
Abstract:
The realization of self-assembled molecular-electronic films, whose room-temperature transport properties are controlled by quantum interference (QI), is an essential step in the scale-up QI effects from single molecules to parallel arrays of molecules. Recently, the effect of destructive QI (DQI) on the electrical conductance of self-assembled monolayers (SAMs) has been investigated. Here, throug…
▽ More
The realization of self-assembled molecular-electronic films, whose room-temperature transport properties are controlled by quantum interference (QI), is an essential step in the scale-up QI effects from single molecules to parallel arrays of molecules. Recently, the effect of destructive QI (DQI) on the electrical conductance of self-assembled monolayers (SAMs) has been investigated. Here, through a combined experimental and theoretical investigation, we demonstrate chemical control of different forms of constructive QI (CQI) in cross-plane transport through SAMs and assess its influence on cross-plane thermoelectricity in SAMs. It is known that the electrical conductance of single molecules can be controlled in a deterministic manner, by chemically varying their connectivity to external electrodes. Here, by employing synthetic methodologies to vary the connectivity of terminal anchor groups around aromatic anthracene cores, and by forming SAMs of the resulting molecules, we clearly demonstrate that this signature of CQI can be translated into SAM-on-gold molecular films. We show that the conductance of vertical molecular junctions formed from anthracene-based molecules with two different connectivities differ by a factor of approximately 16, in agreement with theoretical predictions for their conductance ratio based on constructive QI effects within the core. We also demonstrate that for molecules with thiol anchor groups, the Seebeck coefficient of such films is connectivity dependent and with an appropriate choice of connectivity can be boosted by ~50%. This demonstration of QI and its influence on thermoelectricity in SAMs represents a critical step towards functional ultra-thin-film devices for future thermoelectric and molecular-scale electronics applications.
△ Less
Submitted 11 November, 2019;
originally announced November 2019.
-
Vector-based categorization analysis with improved principal component generated reference
Authors:
Joseph M. Hamill,
Matthias Arenz
Abstract:
With automated measurements, large data sets can be assembled with relative ease. Often these data sets have a large degree of variance. Nonetheless, we hope to find groups within the data set with shared distinguishing characteristics. Recently Albrecht, et al demonstrated a multi-parameter vector-based classification analysis which provided a powerful means to find clusters within a data set of…
▽ More
With automated measurements, large data sets can be assembled with relative ease. Often these data sets have a large degree of variance. Nonetheless, we hope to find groups within the data set with shared distinguishing characteristics. Recently Albrecht, et al demonstrated a multi-parameter vector-based classification analysis which provided a powerful means to find clusters within a data set of conductance versus displacement traces measured from single molecular break junctions (Lemmer, et al, Nature Communications, 2016, 7, 12922). An idealized blank tunneling trace was used as a reference to calculate three vector variables. The authors suggested a more appropriate reference can be chosen to better form clusters in the data. Here we propose using a principal component of the correlation matrix calculated from the data set to construct a fast and strategic reference trace. Principal components form an orthogonal basis set in units of the independent variables comprising the correlation matrix. The first principal component, the one corresponding to the largest eigenvalue of the correlation matrix, points in the direction of largest variance in the data. We used both a blank tunneling reference trace and a reference trace constructed from the first principal component of the correlation matrix to analyze a set of 4,4'-bipyridine single molecular break junctions. The blank tunneling reference trace produced a single elongated cluster in the vector analysis plot whereas the reference trace constructed from the principal component distinguished two arms in the cluster. We hypothesize that these two arms are due to groups of traces with either long or short molecular plateaus. Statistically based sorting algorithms, like vector-based categorization techniques, provide an objective framework to formulate such hypothesis and aid in designing new and pointed studies to verify them.
△ Less
Submitted 3 November, 2017;
originally announced November 2017.
-
Fast data sorting with modified principal component analysis to distinguish unique single molecular break junction trajectories
Authors:
J. M. Hamill,
X. T. Zhao,
G. Mészáros,
M. R. Bryce,
M. Arenz
Abstract:
A simple and fast analysis method to sort large data sets into groups with shared distinguishing characteristics is described, and applied to single molecular break junction conductance versus electrode displacement data. The method, based on principal component analysis, successfully sorted data sets based on the projection of the data onto the first or second principal component of the correlati…
▽ More
A simple and fast analysis method to sort large data sets into groups with shared distinguishing characteristics is described, and applied to single molecular break junction conductance versus electrode displacement data. The method, based on principal component analysis, successfully sorted data sets based on the projection of the data onto the first or second principal component of the correlation matrix without the need to assert any specific hypothesis about the expected features within the data. This was an improvement on the current correlation matrix analysis approach because it sorted data automatically, making it more objective and less time consuming, and our method is applicable to a wide range of multivariate data sets. Here the method was demonstrated on two systems. First, it was demonstrated on mixtures of two molecules with identical anchor groups, similar lengths, but either a $π$ (high conductance) or $σ$ (low conductance) bridge. The mixed data was automatically sorted into two groups containing one molecule or the other. Second, it was demonstrated on break junction data measured with the $π$ bridged molecule alone. Again the method distinguished between two groups. These groups were tentatively assigned to different geometries of the molecule in the junction.
△ Less
Submitted 20 October, 2017; v1 submitted 17 May, 2017;
originally announced May 2017.
-
A Three State NDI Switch: Integration of Pendant Redox Unit for Conductance Tuning
Authors:
Y. Li,
M. Baghernejad,
Q. Al-Galiby,
D. Manrique,
G. Zhang,
J. Hamill,
Y. Fu,
P. Broekmann,
W. Hong,
T. Wandlowski,
D. Zhang,
C. J. Lambert
Abstract:
We studied charge transport phenomena through a core substituted naphthalenediimide (NDI) single-molecule junctions using the electrochemical STM-based break junction technique in combination with DFT calculations. The conductance switch among three well-defined states is acquired by electrochemically controlling the redox state of the pendent diimide unit of the molecule in ionic liquid, and the…
▽ More
We studied charge transport phenomena through a core substituted naphthalenediimide (NDI) single-molecule junctions using the electrochemical STM-based break junction technique in combination with DFT calculations. The conductance switch among three well-defined states is acquired by electrochemically controlling the redox state of the pendent diimide unit of the molecule in ionic liquid, and the conductance difference is more than one order of magnitude between di-anion states and neutral state. The potential dependent charge transport characteristics of the NDI molecules are confirmed by DFT calculations accounting for electrochemical double-layer effects on the conductance of the NDI junctions. This work suggests that the integration of redox unit in the pendent position with strong coupling to molecular backbone can significantly tune the charge transport of the single-molecule device by controlling different redox states.
△ Less
Submitted 8 November, 2016;
originally announced November 2016.
-
Controlling End User Computing Applications - a case study
Authors:
Jamie Chambers,
John Hamill
Abstract:
We report the results of a project to control the use of end user computing tools for business critical applications in a banking environment. Several workstreams were employed in order to bring about a cultural change within the bank towards the use of spreadsheets and other end-user tools, covering policy development, awareness and skills training, inventory monitoring, user licensing, key ris…
▽ More
We report the results of a project to control the use of end user computing tools for business critical applications in a banking environment. Several workstreams were employed in order to bring about a cultural change within the bank towards the use of spreadsheets and other end-user tools, covering policy development, awareness and skills training, inventory monitoring, user licensing, key risk metrics and mitigation approaches. The outcomes of these activities are discussed, and conclusions are drawn as to the need for appropriate organisational models to guide the use of these tools.
△ Less
Submitted 21 September, 2008;
originally announced September 2008.
