-
Multi-purpose InSTRument for Astronomy at Low-resolution: MISTRAL@OHP
Authors:
J. Schmitt,
C. Adami,
M. Dennefeld,
F. Agneray,
S. Basa,
J. C. Brunel,
V. Buat,
D. Burgarella,
C. Carvalho,
G. Castagnoli,
N. Grosso,
F. Huppert,
C. Moreau,
F. Moreau,
L. Moreau,
E. Muslimov,
S. Pascal,
S. Perruchot,
D. Russeil,
J. L. Beuzit,
F. Dolon,
M. Ferrari,
B. Hamelin,
A. LevanSuu,
K. Aravind
, et al. (9 additional authors not shown)
Abstract:
MISTRAL is the new Faint Object Spectroscopic Camera mounted at the folded Cassegrain focus of the 1.93m telescope of Haute-Provence Observatory. We describe the design and components of the instrument and give some details about its operation. We emphasise in particular the various observing modes and the performances of the detector. A short description is also given about the working environmen…
▽ More
MISTRAL is the new Faint Object Spectroscopic Camera mounted at the folded Cassegrain focus of the 1.93m telescope of Haute-Provence Observatory. We describe the design and components of the instrument and give some details about its operation. We emphasise in particular the various observing modes and the performances of the detector. A short description is also given about the working environment. Various types of objects, including stars, nebulae, comets, novae, galaxies have been observed during various test phases to evaluate the performances of the instrument. The instrument covers the range of 4000 to 8000A with the blue setting, or from 6000 to 10000A with the red setting, at an average spectral resolution of 700. Its peak efficiency is about 22% at 6000A. In spectroscopy, a limiting magnitude of 19.5 can be achieved for a point source in one hour with a signal to noise of 3 in the continuum (and better if emission lines are present). In imaging mode, limiting magnitudes of 20-21 can be obtained in 10-20mn (with average seing conditions of 2.5 arcsec at OHP). The instrument is very users-friendly and can be put into operations in less than 15mn (rapid change-over from the other instrument in use) if required by the science (like for Gamma-Rays Bursts). Some first scientific results are described for various types of objects, and in particular for the follow-up of GRBs. While some further improvements are still under way, in particular to ease the switch from blue to red setting and add more grisms or filters, MISTRAL is ready for the follow-up of transients and other variable objects, in the soon-to-come era of e.g. the SVOM satellite and of the Rubin telescope.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
ANUBIS: A Provenance Graph-Based Framework for Advanced Persistent Threat Detection
Authors:
Md. Monowar Anjum,
Shahrear Iqbal,
Benoit Hamelin
Abstract:
We present ANUBIS, a highly effective machine learning-based APT detection system. Our design philosophy for ANUBIS involves two principal components. Firstly, we intend ANUBIS to be effectively utilized by cyber-response teams. Therefore, prediction explainability is one of the main focuses of ANUBIS design. Secondly, ANUBIS uses system provenance graphs to capture causality and thereby achieve h…
▽ More
We present ANUBIS, a highly effective machine learning-based APT detection system. Our design philosophy for ANUBIS involves two principal components. Firstly, we intend ANUBIS to be effectively utilized by cyber-response teams. Therefore, prediction explainability is one of the main focuses of ANUBIS design. Secondly, ANUBIS uses system provenance graphs to capture causality and thereby achieve high detection performance. At the core of the predictive capability of ANUBIS, there is a Bayesian Neural Network that can tell how confident it is in its predictions. We evaluate ANUBIS against a recent APT dataset (DARPA OpTC) and show that ANUBIS can detect malicious activity akin to APT campaigns with high accuracy. Moreover, ANUBIS learns about high-level patterns that allow it to explain its predictions to threat analysts. The high predictive performance with explainable attack story reconstruction makes ANUBIS an effective tool to use for enterprise cyber defense.
△ Less
Submitted 21 December, 2021;
originally announced December 2021.
-
Analyzing the Usefulness of the DARPA OpTC Dataset in Cyber Threat Detection Research
Authors:
Md. Monowar Anjum,
Shahrear Iqbal,
Benoit Hamelin
Abstract:
Maintaining security and privacy in real-world enterprise networks is becoming more and more challenging. Cyber actors are increasingly employing previously unreported and state-of-the-art techniques to break into corporate networks. To develop novel and effective methods to thwart these sophisticated cyberattacks, we need datasets that reflect real-world enterprise scenarios to a high degree of a…
▽ More
Maintaining security and privacy in real-world enterprise networks is becoming more and more challenging. Cyber actors are increasingly employing previously unreported and state-of-the-art techniques to break into corporate networks. To develop novel and effective methods to thwart these sophisticated cyberattacks, we need datasets that reflect real-world enterprise scenarios to a high degree of accuracy. However, precious few such datasets are publicly available. Researchers still predominantly use the decade-old KDD datasets, however, studies showed that these datasets do not adequately reflect modern attacks like Advanced Persistent Threats(APT). In this work, we analyze the usefulness of the recently introduced DARPA Operationally Transparent Cyber (OpTC) dataset in this regard. We describe the content of the dataset in detail and present a qualitative analysis. We show that the OpTC dataset is an excellent candidate for advanced cyber threat detection research while also highlighting its limitations. Additionally, we propose several research directions where this dataset can be useful.
△ Less
Submitted 8 May, 2021; v1 submitted 4 March, 2021;
originally announced March 2021.
-
Laue Lens Development for Hard X-rays (>60 keV)
Authors:
D. Pellicciotta,
F. Frontera,
G. Loffredo,
A. Pisa,
K. Andersen,
P. Courtois,
B. Hamelin,
V. Carassiti,
M. Melchiorri,
S. Squerzanti
Abstract:
Results of reflectivity measurements of mosaic crystal samples of Cu (111) are reported. These tests were performed in the context of a feasibility study of a hard X-ray focusing telescope for space astronomy with energy passband from 60 to 600 keV. The technique envisaged is that of using mosaic crystals in transmission configuration that diffract X-rays for Bragg diffraction (Laue lens). The L…
▽ More
Results of reflectivity measurements of mosaic crystal samples of Cu (111) are reported. These tests were performed in the context of a feasibility study of a hard X-ray focusing telescope for space astronomy with energy passband from 60 to 600 keV. The technique envisaged is that of using mosaic crystals in transmission configuration that diffract X-rays for Bragg diffraction (Laue lens). The Laue lens assumed has a spherical shape with focal length $f$. It is made of flat mosaic crystal tiles suitably positioned in the lens. The samples were grown and worked for this project at the Institute Laue-Langevin (ILL) in Grenoble (France), while the reflectivity tests were performed at the X-ray facility of the Physics Department of the University of Ferrara.
△ Less
Submitted 16 November, 2005;
originally announced November 2005.
-
Exploring the Hard X-/soft gamma-ray Continuum Spectra with Laue Lenses
Authors:
F. Frontera,
A. Pisa,
P. De Chiara,
G. Loffredo,
D. Pellicciotta,
V. Carassiti,
F. Evangelisti,
K. Andersen,
P. Courtois,
B. Hamelin,
L. Amati,
N. Auricchio,
L. Bassani,
E. Caroli,
G. Landini,
M. Orlandini,
J. B. Stephen,
A. Comastri,
J. Knodlseder,
P. von Ballmoos
Abstract:
The history of X-ray astronomy has shown that any advancement in our knowledge of the X-ray sky is strictly related to an increase in instrument sensitivity. At energies above 60 keV, there are interesting prospects for greatly improving the limiting sensitivity of the current generation of direct viewing telescopes (with or without coded masks), offered by the use of Laue lenses. We will discus…
▽ More
The history of X-ray astronomy has shown that any advancement in our knowledge of the X-ray sky is strictly related to an increase in instrument sensitivity. At energies above 60 keV, there are interesting prospects for greatly improving the limiting sensitivity of the current generation of direct viewing telescopes (with or without coded masks), offered by the use of Laue lenses. We will discuss below the development status of a Hard X-Ray focusing Telescope (HAXTEL) based on Laue lenses with a broad bandpass (from 60 to 600 keV) for the study of the X-ray continuum of celestial sources. We show two examplesof multi-lens configurations with expected sensitivity orders of magnitude better ($\sim 1 \times 10^{-8}$ photons cm$^{-2}$ s$^{-1}$ keV$^{-1}$ at 200 keV) than that achieved so far. With this unprecedented sensitivity, very exciting astrophysical prospects are opened.
△ Less
Submitted 7 July, 2005;
originally announced July 2005.
-
Feasibility study of a Laue lens for hard X-rays for space astronomy
Authors:
A. Pisa,
F. Frontera,
P. De Chiara,
G. Loffredo,
D. Pellicciotta,
G. Landini,
T. Franceschini,
S. Silvestri,
K. Andersen,
P. Courtois,
B. Hamelin
Abstract:
We report on the feasibility study of a Laue lens for hard X-rays (>60 keV)based on mosaic crystals, for astrophysical applications. In particular we discuss the scientific motivations, its functioning principle, the procedure followed to select the suitable crystal materials, the criteria adopted to establish crystal dimensions and their distribution on the lens in order to obtain the best lens f…
▽ More
We report on the feasibility study of a Laue lens for hard X-rays (>60 keV)based on mosaic crystals, for astrophysical applications. In particular we discuss the scientific motivations, its functioning principle, the procedure followed to select the suitable crystal materials, the criteria adopted to establish crystal dimensions and their distribution on the lens in order to obtain the best lens focusing capabilities, and the criteria for optimizing the lens effective area in a given passband. We also discuss the effects of misalignments of the crystal tiles due to unavoidable mechanical errors in assembling the lens. A software was developed to face all these topics and to evaluate the expected lens performance.
△ Less
Submitted 5 January, 2011; v1 submitted 19 November, 2004;
originally announced November 2004.
