Showing 1–50 of 103 results for author: Haldar, S

Coherence of an Electronic Two-Level System under Continuous Charge Sensing by a Quantum Dot Detector

Authors: Subhomoy Haldar, Morten Munk, Harald Havir, Waqar Khan, Sebastian Lehmann, Claes Thelander, Kimberly A. Dick, Peter Samuelsson, Patrick P. Potts, Ville F. Maisi

Abstract: We investigate experimentally the quantum coherence of an electronic two-level system in a double quantum dot under continuous charge detection. The charge-state of the two-level system is monitored by a capacitively coupled single quantum dot detector that imposes a back-action effect to the system. The measured back-action is well described by an additional decoherence rate, approximately linear… ▽ More We investigate experimentally the quantum coherence of an electronic two-level system in a double quantum dot under continuous charge detection. The charge-state of the two-level system is monitored by a capacitively coupled single quantum dot detector that imposes a back-action effect to the system. The measured back-action is well described by an additional decoherence rate, approximately linearly proportional to the detector electron tunneling rate. We provide a model for the decoherence rate arising due to level detuning fluctuations induced by detector charge fluctuations. The theory predicts a factor of two lower decoherence rate than observed in the experiment, suggesting the need for a more elaborate theory accounting for additional sources of decoherence. △ Less

Submitted 17 June, 2024; originally announced June 2024.

Comments: 5 pages, 3 figures

BAKU: An Efficient Transformer for Multi-Task Policy Learning

Authors: Siddhant Haldar, Zhuoran Peng, Lerrel Pinto

Abstract: Training generalist agents capable of solving diverse tasks is challenging, often requiring large datasets of expert demonstrations. This is particularly problematic in robotics, where each data point requires physical execution of actions in the real world. Thus, there is a pressing need for architectures that can effectively leverage the available training data. In this work, we present BAKU, a… ▽ More Training generalist agents capable of solving diverse tasks is challenging, often requiring large datasets of expert demonstrations. This is particularly problematic in robotics, where each data point requires physical execution of actions in the real world. Thus, there is a pressing need for architectures that can effectively leverage the available training data. In this work, we present BAKU, a simple transformer architecture that enables efficient learning of multi-task robot policies. BAKU builds upon recent advancements in offline imitation learning and meticulously combines observation trunks, action chunking, multi-sensory observations, and action heads to substantially improve upon prior work. Our experiments on 129 simulated tasks across LIBERO, Meta-World suite, and the Deepmind Control suite exhibit an overall 18% absolute improvement over RT-1 and MT-ACT, with a 36% improvement on the harder LIBERO benchmark. On 30 real-world manipulation tasks, given an average of just 17 demonstrations per task, BAKU achieves a 91% success rate. Videos of the robot are best viewed at https://baku-robot.github.io/. △ Less

Submitted 11 June, 2024; originally announced June 2024.

High-efficiency microwave photodetection by cavity coupled double dots with single cavity-photon sensitivity

Authors: Subhomoy Haldar, Harald Havir, Waqar Khan, Drilon Zenelaj, Patrick P. Potts, Sebastian Lehmann, Kimberly A. Dick, Peter Samuelsson, Ville F. Maisi

Abstract: We present a superconducting cavity-coupled double quantum dot (DQD) photodiode that achieves a maximum photon-to-electron conversion efficiency of 25% in the microwave domain. With a higher-quality-factor cavity and improved device design to prevent photon leakages through unwanted pathways, our device measures microwave signals down to 100 aW power level and achieves sensitivity to probe microwa… ▽ More We present a superconducting cavity-coupled double quantum dot (DQD) photodiode that achieves a maximum photon-to-electron conversion efficiency of 25% in the microwave domain. With a higher-quality-factor cavity and improved device design to prevent photon leakages through unwanted pathways, our device measures microwave signals down to 100 aW power level and achieves sensitivity to probe microwave signals with one photon at a time in the cavity. We analyze the photodiode operation using Jaynes-Cummings input-output theory, identifying the key improvements of stronger cavity-DQD coupling needed to achieve near-unity photodetection efficiency. The results presented in this work represent a crucial advancement toward near unity microwave photodetection efficiency with single cavity-photon sensitivity for studies of photon statistics in the microwave range and applications related to quantum information processing. △ Less

Submitted 5 June, 2024; originally announced June 2024.

Comments: 8 pages, 4 figures

Factors Influencing Performance of Students in Software Automated Test Tools Course

Authors: Susmita Haldar, Mary Pierce, Luiz Fernando Capretz

Abstract: Formal software testing education is important for building efficient QA professionals. Various aspects of quality assurance approaches are usually covered in courses for training software testing students. Automated Test Tools is one of the core courses in the software testing post-graduate curriculum due to the high demand for automated testers in the workforce. It is important to understand whi… ▽ More Formal software testing education is important for building efficient QA professionals. Various aspects of quality assurance approaches are usually covered in courses for training software testing students. Automated Test Tools is one of the core courses in the software testing post-graduate curriculum due to the high demand for automated testers in the workforce. It is important to understand which factors are affecting student performance in the automated testing course to be able to assist the students early on based on their needs. Various metrics that are considered for predicting student performance in this testing course are student engagement, grades on individual deliverables, and prerequisite courses. This study identifies the impact of assessing students based on individual vs. group activities, theoretical vs. practical components, and the effect of having taken prerequisite courses in their final grade. To carry out this research, student data was collected from the automated test tools course of a community college-based postgraduate certificate program in software testing. The dataset contained student records from the years 2021 to 2022 and consisted of information from five different semesters. Various machine learning algorithms were applied to develop an effective model for predicting students performance in the automated software testing tools course, and finally, important features affecting the students performance were identified. The predictive performance model of the automated test tools course that was developed by applying the logistic regression technique, showed the best performance, with an accuracy score of 90%. △ Less

Submitted 31 May, 2024; originally announced May 2024.

Comments: 8 pages

Journal ref: 17th IEEE International Conference of Software Testing, Verification and Validation Workshops (ICSTW-2024)

Kicking Co and Rh atoms on a row-wise antiferromagnet

Authors: Felix Zahner, Soumyajyoti Haldar, Roland Wiesendanger, Stefan Heinze, Kirsten von Bergmann, André Kubetzka

Abstract: Diffusion on surfaces is a fundamental process in surface science, governing nanostructure and film growth, molecular self-assembly, and chemical reactions. Atom motion on non-magnetic surfaces has been studied extensively both theoretically and by real-space imaging techniques. For magnetic surfaces density functional theory (DFT) calculations have predicted strong effects of the magnetic state o… ▽ More Diffusion on surfaces is a fundamental process in surface science, governing nanostructure and film growth, molecular self-assembly, and chemical reactions. Atom motion on non-magnetic surfaces has been studied extensively both theoretically and by real-space imaging techniques. For magnetic surfaces density functional theory (DFT) calculations have predicted strong effects of the magnetic state onto adatom diffusion, but to date no corresponding experimental data exists. Here, we investigate Co and Rh atoms on a hexagonal magnetic layer, using scanning tunneling microscopy (STM) and DFT calculations. Experimentally, we "kick" atoms by local voltage pulses and thereby initiate strictly one-dimensional motion which is dictated by the row-wise antiferromagnetic (AFM) state. Our calculations show that the one-dimensional motion of Co and Rh atoms results from conserving the Co spin direction during movement and avoiding high induced Rh spin moments, respectively. These findings demonstrate that magnetism can be a means to control adatom mobility. △ Less

Submitted 30 May, 2024; originally announced May 2024.

Comments: 5 main figures, 3 extended figures

The Brain Tumor Segmentation in Pediatrics (BraTS-PEDs) Challenge: Focus on Pediatrics (CBTN-CONNECT-DIPGR-ASNR-MICCAI BraTS-PEDs)

Authors: Anahita Fathi Kazerooni, Nastaran Khalili, Deep Gandhi, Xinyang Liu, Zhifan Jiang, Syed Muhammed Anwar, Jake Albrecht, Maruf Adewole, Udunna Anazodo, Hannah Anderson, Sina Bagheri, Ujjwal Baid, Timothy Bergquist, Austin J. Borja, Evan Calabrese, Verena Chung, Gian-Marco Conte, Farouk Dako, James Eddy, Ivan Ezhov, Ariana Familiar, Keyvan Farahani, Anurag Gottipati, Debanjan Haldar, Shuvanjan Haldar , et al. (51 additional authors not shown)

Abstract: Pediatric tumors of the central nervous system are the most common cause of cancer-related death in children. The five-year survival rate for high-grade gliomas in children is less than 20%. Due to their rarity, the diagnosis of these entities is often delayed, their treatment is mainly based on historic treatment concepts, and clinical trials require multi-institutional collaborations. Here we pr… ▽ More Pediatric tumors of the central nervous system are the most common cause of cancer-related death in children. The five-year survival rate for high-grade gliomas in children is less than 20%. Due to their rarity, the diagnosis of these entities is often delayed, their treatment is mainly based on historic treatment concepts, and clinical trials require multi-institutional collaborations. Here we present the CBTN-CONNECT-DIPGR-ASNR-MICCAI BraTS-PEDs challenge, focused on pediatric brain tumors with data acquired across multiple international consortia dedicated to pediatric neuro-oncology and clinical trials. The CBTN-CONNECT-DIPGR-ASNR-MICCAI BraTS-PEDs challenge brings together clinicians and AI/imaging scientists to lead to faster development of automated segmentation techniques that could benefit clinical trials, and ultimately the care of children with brain tumors. △ Less

Submitted 29 April, 2024; v1 submitted 23 April, 2024; originally announced April 2024.

Comments: arXiv admin note: substantial text overlap with arXiv:2305.17033

OPEN TEACH: A Versatile Teleoperation System for Robotic Manipulation

Authors: Aadhithya Iyer, Zhuoran Peng, Yinlong Dai, Irmak Guzey, Siddhant Haldar, Soumith Chintala, Lerrel Pinto

Abstract: Open-sourced, user-friendly tools form the bedrock of scientific advancement across disciplines. The widespread adoption of data-driven learning has led to remarkable progress in multi-fingered dexterity, bimanual manipulation, and applications ranging from logistics to home robotics. However, existing data collection platforms are often proprietary, costly, or tailored to specific robotic morphol… ▽ More Open-sourced, user-friendly tools form the bedrock of scientific advancement across disciplines. The widespread adoption of data-driven learning has led to remarkable progress in multi-fingered dexterity, bimanual manipulation, and applications ranging from logistics to home robotics. However, existing data collection platforms are often proprietary, costly, or tailored to specific robotic morphologies. We present OPEN TEACH, a new teleoperation system leveraging VR headsets to immerse users in mixed reality for intuitive robot control. Built on the affordable Meta Quest 3, which costs $500, OPEN TEACH enables real-time control of various robots, including multi-fingered hands and bimanual arms, through an easy-to-use app. Using natural hand gestures and movements, users can manipulate robots at up to 90Hz with smooth visual feedback and interface widgets offering closeup environment views. We demonstrate the versatility of OPEN TEACH across 38 tasks on different robots. A comprehensive user study indicates significant improvement in teleoperation capability over the AnyTeleop framework. Further experiments exhibit that the collected data is compatible with policy learning on 10 dexterous and contact-rich manipulation tasks. Currently supporting Franka, xArm, Jaco, and Allegro platforms, OPEN TEACH is fully open-sourced to promote broader adoption. Videos are available at https://open-teach.github.io/. △ Less

Submitted 12 March, 2024; originally announced March 2024.

Modelling response time contrasts in superconducting nanowire single photon detectors

Authors: Souvik Haldar, Arun Sehrawat, Krishna B. Balasubramanian

Abstract: Superconducting Nanowire Single Photon Detector (SNSPD) emerges as a potential candidate in the multiple fields requiring sensitive and fast photodetection. While nanowires of low temperature superconducting detectors are mature with commercial solutions, other material options with higher transition temperature and faster responses are currently being explored. Towards this goal, we develop a gen… ▽ More Superconducting Nanowire Single Photon Detector (SNSPD) emerges as a potential candidate in the multiple fields requiring sensitive and fast photodetection. While nanowires of low temperature superconducting detectors are mature with commercial solutions, other material options with higher transition temperature and faster responses are currently being explored. Towards this goal, we develop a generalized numerical model that incorporates the thermodynamic properties of the superconducting material and identifies the minimum resolvable photon count for a given bias and device parameters. A phase diagram of detection and latching phases with the minimum number of photons as a function of biasing current and biasing temperature for each material system is presented. We show using the developed model that while low temperature superconducting (LTS) nanowires are more sensitive to the incident photon at different wavelengths, the ultimate limit of a single photon can be achieved using high temperature superconducting (HTS) material such as YBa2Cu3O7-δ, albeit at stringent biasing conditions. On the contrary, ultrafast response time with three orders of magnitude smaller response times can be achieved in select HTS materials making it an appealing for several practical applications. △ Less

Submitted 12 March, 2024; originally announced March 2024.

High-Impedance Microwave Resonators with Two-Photon Nonlinear Effects

Authors: S. Andersson, H. Havir, A. Ranni, S. Haldar, V. F. Maisi

Abstract: In this article, we present an experimental study of a Josephson junction -based high-impedance resonator. By taking the resonator to the limit of consisting effectively only of one junction, results in strong non-linear effects already for the second photon while maintaining a high impedance of the resonance mode. Our experiment yields thus resonators with the strong interactions both between ind… ▽ More In this article, we present an experimental study of a Josephson junction -based high-impedance resonator. By taking the resonator to the limit of consisting effectively only of one junction, results in strong non-linear effects already for the second photon while maintaining a high impedance of the resonance mode. Our experiment yields thus resonators with the strong interactions both between individual resonator photons and from the resonator photons to other electric quantum systems. We also present an energy diagram technique which enables to measure, identify and analyse different multi-photon optics processes along their energy conservation lines. △ Less

Submitted 6 March, 2024; originally announced March 2024.

Trust Regions for Explanations via Black-Box Probabilistic Certification

Authors: Amit Dhurandhar, Swagatam Haldar, Dennis Wei, Karthikeyan Natesan Ramamurthy

Abstract: Given the black box nature of machine learning models, a plethora of explainability methods have been developed to decipher the factors behind individual decisions. In this paper, we introduce a novel problem of black box (probabilistic) explanation certification. We ask the question: Given a black box model with only query access, an explanation for an example and a quality metric (viz. fidelity,… ▽ More Given the black box nature of machine learning models, a plethora of explainability methods have been developed to decipher the factors behind individual decisions. In this paper, we introduce a novel problem of black box (probabilistic) explanation certification. We ask the question: Given a black box model with only query access, an explanation for an example and a quality metric (viz. fidelity, stability), can we find the largest hypercube (i.e., $\ell_{\infty}$ ball) centered at the example such that when the explanation is applied to all examples within the hypercube, (with high probability) a quality criterion is met (viz. fidelity greater than some value)? Being able to efficiently find such a \emph{trust region} has multiple benefits: i) insight into model behavior in a \emph{region}, with a \emph{guarantee}; ii) ascertained \emph{stability} of the explanation; iii) \emph{explanation reuse}, which can save time, energy and money by not having to find explanations for every example; and iv) a possible \emph{meta-metric} to compare explanation methods. Our contributions include formalizing this problem, proposing solutions, providing theoretical guarantees for these solutions that are computable, and experimentally showing their efficacy on synthetic and real data. △ Less

Submitted 5 June, 2024; v1 submitted 16 February, 2024; originally announced February 2024.

Comments: Accepted to ICML 2024

Prediction of stable nanoscale skyrmions in monolayer Fe$_5$GeTe$_2$

Authors: Dongzhe Li, Soumyajyoti Haldar, Leo Kollwitz, Hendrik Schrautzer, Moritz A. Goerzen, Stefan Heinze

Abstract: Using first-principles calculations and atomistic spin simulations, we predict stable isolated skyrmions with a diameter below 10 nm in a monolayer of the two-dimensional van der Waals ferromagnet Fe$_5$GeTe$_2$, a material of significant experimental interest. A very large Dzyaloshinskii-Moriya interaction (DMI) is observed due to the intrinsic broken inversion symmetry and strong spin-orbit coup… ▽ More Using first-principles calculations and atomistic spin simulations, we predict stable isolated skyrmions with a diameter below 10 nm in a monolayer of the two-dimensional van der Waals ferromagnet Fe$_5$GeTe$_2$, a material of significant experimental interest. A very large Dzyaloshinskii-Moriya interaction (DMI) is observed due to the intrinsic broken inversion symmetry and strong spin-orbit coupling for monolayer Fe$_5$GeTe$_2$. We show that the nearest-neighbor approximation, often used in literature, fails to describe the DMI. The strong DMI together with moderate in-plane magnetocrystalline anisotropy energy allows to stabilize nanoscale skyrmions in out-of-plane magnetic fields above $\approx 2$~T. The energy barriers of skyrmions in monolayer Fe$_5$GeTe$_2$ are comparable to those of state-of-the-art transition-metal ultra-thin films. We further predict that these nanoscale skyrmions can be stable for hours at temperatures up to 20 K. △ Less

Submitted 10 June, 2024; v1 submitted 31 January, 2024; originally announced January 2024.

Comments: 7 pages, 4 figures

Journal ref: Phys. Rev. B 109, L220404 (2024)

Reducing classical communication costs in multiplexed quantum repeaters using hardware-aware quasi-local policies

Authors: Stav Haldar, Pratik J. Barge, Xiang Cheng, Kai-Chi Chang, Brian T. Kirby, Sumeet Khatri, Chee Wei Wong, Hwang Lee

Abstract: Future quantum networks will have nodes equipped with multiple quantum memories, allowing for multiplexing and entanglement distillation strategies in order to increase fidelities and reduce waiting times for end-to-end entanglement distribution. In this work, we introduce \textit{quasi-local} policies for multiplexed quantum repeater chains. In fully-local policies, nodes make decisions based onl… ▽ More Future quantum networks will have nodes equipped with multiple quantum memories, allowing for multiplexing and entanglement distillation strategies in order to increase fidelities and reduce waiting times for end-to-end entanglement distribution. In this work, we introduce \textit{quasi-local} policies for multiplexed quantum repeater chains. In fully-local policies, nodes make decisions based only on knowledge of their own states. In our quasi-local policies, nodes have increased knowledge of the state of the repeater chain, but not necessarily full, global knowledge. Our policies exploit the observation that for most decisions the nodes have to make, they only need to have information about the connected region of the chain they belong to, and not the entire chain. In this way, we not only obtain improved performance over local policies, but we reduce the classical communication (CC) costs inherent to global-knowledge policies. Our policies also outperform the well-known and widely studied nested purification and doubling swap** policy in practically relevant parameter regimes. We also carefully examine the role of entanglement distillation. Via analytical and numerical results, we identify the parameter regimes in which distillation makes sense and is useful. In these regimes, we also address the question: "Should we distill before swap**, or vice versa?" Finally, to provide further practical guidance, we propose an experimental implementation of a multiplexing-based repeater chain, and experimentally demonstrate the key element, a high-dimensional biphoton frequency comb. We then evaluate the anticipated performance of our multiplexing-based policies in such a real-world network through simulation results for two concrete memory platforms, namely rare-earth ions and diamond vacancies. △ Less

Submitted 9 May, 2024; v1 submitted 23 January, 2024; originally announced January 2024.

Comments: New results with classical communication costs of distillation added. 16 pages, 12 figures in the main text. 6 appendices. New appendix discussing CC model. Comments/suggestions are most welcome

Training and Comparison of nnU-Net and DeepMedic Methods for Autosegmentation of Pediatric Brain Tumors

Authors: Arastoo Vossough, Nastaran Khalili, Ariana M. Familiar, Deep Gandhi, Karthik Viswanathan, Wenxin Tu, Debanjan Haldar, Sina Bagheri, Hannah Anderson, Shuvanjan Haldar, Phillip B. Storm, Adam Resnick, Jeffrey B. Ware, Ali Nabavizadeh, Anahita Fathi Kazerooni

Abstract: Brain tumors are the most common solid tumors and the leading cause of cancer-related death among children. Tumor segmentation is essential in surgical and treatment planning, and response assessment and monitoring. However, manual segmentation is time-consuming and has high inter-operator variability, underscoring the need for more efficient methods. We compared two deep learning-based 3D segment… ▽ More Brain tumors are the most common solid tumors and the leading cause of cancer-related death among children. Tumor segmentation is essential in surgical and treatment planning, and response assessment and monitoring. However, manual segmentation is time-consuming and has high inter-operator variability, underscoring the need for more efficient methods. We compared two deep learning-based 3D segmentation models, DeepMedic and nnU-Net, after training with pediatric-specific multi-institutional brain tumor data using based on multi-parametric MRI scans.Multi-parametric preoperative MRI scans of 339 pediatric patients (n=293 internal and n=46 external cohorts) with a variety of tumor subtypes, were preprocessed and manually segmented into four tumor subregions, i.e., enhancing tumor (ET), non-enhancing tumor (NET), cystic components (CC), and peritumoral edema (ED). After training, performance of the two models on internal and external test sets was evaluated using Dice scores, sensitivity, and Hausdorff distance with reference to ground truth manual segmentations. Dice score for nnU-Net internal test sets was (mean +/- SD (median)) 0.9+/-0.07 (0.94) for WT, 0.77+/-0.29 for ET, 0.66+/-0.32 for NET, 0.71+/-0.33 for CC, and 0.71+/-0.40 for ED, respectively. For DeepMedic the Dice scores were 0.82+/-0.16 for WT, 0.66+/-0.32 for ET, 0.48+/-0.27, for NET, 0.48+/-0.36 for CC, and 0.19+/-0.33 for ED, respectively. Dice scores were significantly higher for nnU-Net (p<=0.01). External validation of the trained nnU-Net model on the multi-institutional BraTS-PEDs 2023 dataset revealed high generalization capability in segmentation of whole tumor and tumor core with Dice scores of 0.87+/-0.13 (0.91) and 0.83+/-0.18 (0.89), respectively. Pediatric-specific data trained nnU-Net model is superior to DeepMedic for whole tumor and subregion segmentation of pediatric brain tumors. △ Less

Submitted 30 January, 2024; v1 submitted 16 January, 2024; originally announced January 2024.

Continuous microwave photon counting by semiconductor-superconductor hybrids

Authors: Subhomoy Haldar, David Barker, Harald Havir, Antti Ranni, Sebastian Lehmann, Kimberly A. Dick, Ville F. Maisi

Abstract: The growing interest in quantum information has enabled the manipulation and readout of microwave photon states with high fidelities. The presently available microwave photon counters, based on superconducting circuits, are limited to non-continuous pulsed mode operation, requiring additional steps for qubit state preparation before an actual measurement. Here, we present a continuous microwave ph… ▽ More The growing interest in quantum information has enabled the manipulation and readout of microwave photon states with high fidelities. The presently available microwave photon counters, based on superconducting circuits, are limited to non-continuous pulsed mode operation, requiring additional steps for qubit state preparation before an actual measurement. Here, we present a continuous microwave photon counter based on superconducting cavity-coupled semiconductor quantum dots. The device utilizes photon-assisted tunneling in a double quantum dot with tunneling events being probed by a third dot. Our device detects both single and multiple-photon absorption events independently, thanks to the energy tunability of a two-level double-dot absorber. We show that the photon-assisted tunnel rates serve as the measure of the cavity photon state in line with the P(E) theory - a theoretical framework delineating the mediation of the cavity photon field via a two-level environment. We further describe the single photon detection using the Jaynes-Cummings input-output theory and show that it agrees with the P(E) theory predictions. △ Less

Submitted 12 January, 2024; originally announced January 2024.

Comments: 8 pages, 3 figures

A quantum-assisted master clock in the sky: global synchronization from satellites at sub-nanosecond precision

Authors: Sage Ducoing, Ivan Agullo, James E. Troupe, Stav Haldar

Abstract: This article develops a protocol to synchronize clocks on board a network of satellites equipped with quantum resources. We show that, in such a constellation, satellites reinforce each other's sync capabilities, forming a common clock that is more stable and precise than its constituents. We envision the resulting network as a master clock able to distribute time across the globe, providing the b… ▽ More This article develops a protocol to synchronize clocks on board a network of satellites equipped with quantum resources. We show that, in such a constellation, satellites reinforce each other's sync capabilities, forming a common clock that is more stable and precise than its constituents. We envision the resulting network as a master clock able to distribute time across the globe, providing the basis for a future quantum global navigation satellite system or a space-based quantum network. As an example of its capabilities, we show that a constellation of 50 satellites equipped with modest quantum resources, and distributed amongst 5 orbits at an altitude of 500 km, allows the synchronization of clocks spread across the globe at sub-nanosecond precision. △ Less

Submitted 18 November, 2023; originally announced November 2023.

Comments: 16 pages, 11 figures and 3 tables. Comments are welcome

Density Functional Theory Study of Light Metal (Li/Na/Ca) Functionalized Borophosphene for Reversible Hydrogen Storage

Authors: Sandip Haldar

Abstract: Borophosphene is investigated for hydrogen storage by density functional theory calculations through Li, Na and Ca decoration. Decoration enhances the binding energy from -0.047 eV/H2 to -0.20 -- -0.42 eV/H2. PDOS and Bader charge analysis elucidate the role of adatom decoration in charge transfer and better binding. Up to 10, 12 and 20 H2 molecules can be adsorbed over a single Li, Na and Ca adat… ▽ More Borophosphene is investigated for hydrogen storage by density functional theory calculations through Li, Na and Ca decoration. Decoration enhances the binding energy from -0.047 eV/H2 to -0.20 -- -0.42 eV/H2. PDOS and Bader charge analysis elucidate the role of adatom decoration in charge transfer and better binding. Up to 10, 12 and 20 H2 molecules can be adsorbed over a single Li, Na and Ca adatom, respectively, in a supercell of 32 atoms. Desorption temperature is calculated from the binding energies. A complete discharge of the stored molecules from decorated borophosphene can be realized in temperature range of 125 to 531 K. Further, decoration at multiple sites of the substrate is performed to evaluate the theoretical gravimetric density. With Li, Na, and Ca overloading, gravimetric densities of 6.22%, 5.34%, and 6.08% are obtained. NEB results show that inter-site energy barriers of the adatoms are larger than their thermal energy by an order. △ Less

Submitted 24 October, 2023; originally announced October 2023.

Comments: 18 pages, 10 figures

Open X-Embodiment: Robotic Learning Datasets and RT-X Models

Authors: Open X-Embodiment Collaboration, Abby O'Neill, Abdul Rehman, Abhinav Gupta, Abhiram Maddukuri, Abhishek Gupta, Abhishek Padalkar, Abraham Lee, Acorn Pooley, Agrim Gupta, Ajay Mandlekar, A**kya Jain, Albert Tung, Alex Bewley, Alex Herzog, Alex Irpan, Alexander Khazatsky, Anant Rai, Anchit Gupta, Andrew Wang, Andrey Kolobov, Anikait Singh, Animesh Garg, Aniruddha Kembhavi, Annie Xie , et al. (267 additional authors not shown)

Abstract: Large, high-capacity models trained on diverse datasets have shown remarkable successes on efficiently tackling downstream applications. In domains from NLP to Computer Vision, this has led to a consolidation of pretrained models, with general pretrained backbones serving as a starting point for many applications. Can such a consolidation happen in robotics? Conventionally, robotic learning method… ▽ More Large, high-capacity models trained on diverse datasets have shown remarkable successes on efficiently tackling downstream applications. In domains from NLP to Computer Vision, this has led to a consolidation of pretrained models, with general pretrained backbones serving as a starting point for many applications. Can such a consolidation happen in robotics? Conventionally, robotic learning methods train a separate model for every application, every robot, and even every environment. Can we instead train generalist X-robot policy that can be adapted efficiently to new robots, tasks, and environments? In this paper, we provide datasets in standardized data formats and models to make it possible to explore this possibility in the context of robotic manipulation, alongside experimental results that provide an example of effective X-robot policies. We assemble a dataset from 22 different robots collected through a collaboration between 21 institutions, demonstrating 527 skills (160266 tasks). We show that a high-capacity model trained on this data, which we call RT-X, exhibits positive transfer and improves the capabilities of multiple robots by leveraging experience from other platforms. More details can be found on the project website https://robotics-transformer-x.github.io. △ Less

Submitted 1 June, 2024; v1 submitted 13 October, 2023; originally announced October 2023.

Comments: Project website: https://robotics-transformer-x.github.io

PolyTask: Learning Unified Policies through Behavior Distillation

Authors: Siddhant Haldar, Lerrel Pinto

Abstract: Unified models capable of solving a wide variety of tasks have gained traction in vision and NLP due to their ability to share regularities and structures across tasks, which improves individual task performance and reduces computational footprint. However, the impact of such models remains limited in embodied learning problems, which present unique challenges due to interactivity, sample ineffici… ▽ More Unified models capable of solving a wide variety of tasks have gained traction in vision and NLP due to their ability to share regularities and structures across tasks, which improves individual task performance and reduces computational footprint. However, the impact of such models remains limited in embodied learning problems, which present unique challenges due to interactivity, sample inefficiency, and sequential task presentation. In this work, we present PolyTask, a novel method for learning a single unified model that can solve various embodied tasks through a 'learn then distill' mechanism. In the 'learn' step, PolyTask leverages a few demonstrations for each task to train task-specific policies. Then, in the 'distill' step, task-specific policies are distilled into a single policy using a new distillation method called Behavior Distillation. Given a unified policy, individual task behavior can be extracted through conditioning variables. PolyTask is designed to be conceptually simple while being able to leverage well-established algorithms in RL to enable interactivity, a handful of expert demonstrations to allow for sample efficiency, and preventing interactive access to tasks during distillation to enable lifelong learning. Experiments across three simulated environment suites and a real-robot suite show that PolyTask outperforms prior state-of-the-art approaches in multi-task and lifelong learning settings by significant margins. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Proposal for all-electrical skyrmion detection in van der Waals tunnel junctions

Authors: Dongzhe Li, Soumyajyoti Haldar, Stefan Heinze

Abstract: A major challenge for magnetic skyrmions in atomically thin van der Waals (vdW) materials is reliable skyrmion detection. Here, based on rigorous first-principles calculations, we show that all-electrical skyrmion detection is feasible in 2D vdW magnets via scanning tunneling microscopy (STM) and in planar tunnel junctions. We use the nonequilibrium Green's function method for quantum transport in… ▽ More A major challenge for magnetic skyrmions in atomically thin van der Waals (vdW) materials is reliable skyrmion detection. Here, based on rigorous first-principles calculations, we show that all-electrical skyrmion detection is feasible in 2D vdW magnets via scanning tunneling microscopy (STM) and in planar tunnel junctions. We use the nonequilibrium Green's function method for quantum transport in planar junctions, including self-energy due to electrodes and working conditions, going beyond the standard Tersoff-Hamann approximation. We obtain a very large tunneling anisotropic magnetoresistance (TAMR) around the Fermi energy for a vdW tunnel junction based on graphite/Fe$_3$GeTe$_2$/germanene/graphite. For atomic-scale skyrmions the noncollinear magnetoresistance (NCMR) reaches giant values. We trace the origin of the NCMR to spin-mixing between spin-up and -down states of $p_z$ and $d_{z^2}$ character at the surface atoms. Both TAMR and NCMR are drastically enhanced in tunnel junctions with respect to STM geometry due to orbital symmetry matching at the interface. △ Less

Submitted 14 February, 2024; v1 submitted 7 September, 2023; originally announced September 2023.

Comments: 5 figures

Journal ref: Nano Letters (2014)

Coherent Spin-Phonon Coupling in the Layered Ferrimagnet Mn3Si2Te6

Authors: L. M. Martinez, Y. Liu, C. Petrovic, S. Haldar, T. Griepe, U. Atxitia, M. Campbell, M. Pettes, R. P. Prasankumar, E. J. G. Santos, S. R. Singamaneni, P. Padmanabhan

Abstract: We utilize ultrafast photoexcitation to drive coherent lattice oscillations in the layered ferrimagnetic crystal Mn3Si2Te6, which significantly stiffen below the magnetic ordering temperature. We suggest that this is due to an exchange-mediated contraction of the lattice, stemming from strong magneto-structural coupling in this material. Additionally, simulations of the transient incoherent dynami… ▽ More We utilize ultrafast photoexcitation to drive coherent lattice oscillations in the layered ferrimagnetic crystal Mn3Si2Te6, which significantly stiffen below the magnetic ordering temperature. We suggest that this is due to an exchange-mediated contraction of the lattice, stemming from strong magneto-structural coupling in this material. Additionally, simulations of the transient incoherent dynamics reveal the importance of spin relaxation channels mediated by optical and acoustic phonon scattering. Our findings highlight the importance of spin-lattice coupling in van der Waals magnets and a promising route for their dynamic optical control through their intertwined electronic, lattice, and spin degrees of freedom. △ Less

Submitted 28 August, 2023; originally announced August 2023.

Dephasing in a crystal-phase defined double quantum dot charge qubit strongly coupled to a high-impedance resonator

Authors: Antti Ranni, Subhomoy Haldar, Harald Havir, Sebastian Lehmann, Pasquale Scarlino, Andreas Baumgartner, Christian Schönenberger, Claes Thelander, Kimberly A. Dick, Patrick P. Potts, Ville F. Maisi

Abstract: Dephasing of a charge qubit is usually credited to charge noise in the environment. Here we show that charge noise may not be the limiting factor for the qubit coherence. To this end, we study coherence properties of a crystal-phase defined semiconductor nanowire double quantum dot (DQD) charge qubit strongly coupled to a high-impedance resonator using radio-frequency (RF) reflectometry. Response… ▽ More Dephasing of a charge qubit is usually credited to charge noise in the environment. Here we show that charge noise may not be the limiting factor for the qubit coherence. To this end, we study coherence properties of a crystal-phase defined semiconductor nanowire double quantum dot (DQD) charge qubit strongly coupled to a high-impedance resonator using radio-frequency (RF) reflectometry. Response of this hybrid system is measured both at a charge noise sensitive operation point (with finite DQD detuning) and at an insensitive point (so-called sweet spot with zero detuning). A theoretical model based on Jaynes-Cummings Hamiltonian matches the experimental results well and yields only a 10 % difference in dephasing rates between the two cases, despite that the sensitivity to detuning charge noise differs by a factor of 5. Therefore the charge noise is not the limiting factor for the coherence in this type of semiconducting nanowire qubits. △ Less

Submitted 28 August, 2023; originally announced August 2023.

Comments: 7 pages, 3 figures

Coupling of the triple-Q state to the atomic lattice by anisotropic symmetric exchange

Authors: Felix Nickel, André Kubetzka, Soumyajyoti Haldar, Roland Wiesendanger, Stefan Heinze, Kirsten von Bergmann

Abstract: We identify the triple-Q (3Q) state as magnetic ground state in Pd/Mn and Rh/Mn bilayers on Re(0001) using spin-polarized scanning tunneling microscopy and density functional theory. An atomistic model reveals that in general the 3Q state with tetrahedral magnetic order and zero net spin moment is coupled to a hexagonal atomic lattice in a highly symmetric orientation via the anisotropic symmetric… ▽ More We identify the triple-Q (3Q) state as magnetic ground state in Pd/Mn and Rh/Mn bilayers on Re(0001) using spin-polarized scanning tunneling microscopy and density functional theory. An atomistic model reveals that in general the 3Q state with tetrahedral magnetic order and zero net spin moment is coupled to a hexagonal atomic lattice in a highly symmetric orientation via the anisotropic symmetric exchange interaction, whereas other spin-orbit coupling terms cancel due to symmetry. Our experiments are in agreement with the predicted orientation of the 3Q state. A distortion from the ideal tetrahedral angles leads to other orientations of the 3Q state which, however, results in a reduced topological orbital magnetization compared to the ideal 3Q state. △ Less

Submitted 19 July, 2023; originally announced July 2023.

Comments: 15 pages, 4 figures

Journal ref: Phys. Rev. B 108, L180411 (2023)

Microwave power harvesting using resonator-coupled double quantum dot photodiode

Authors: Subhomoy Haldar, Drilon Zenelaj, Patrick P. Potts, Harald Havir, Sebastian Lehmann, Kimberly A. Dick, Peter Samuelsson, Ville F. Maisi

Abstract: We demonstrate a microwave power-to-electrical energy conversion in a resonator-coupled double quantum dot. The system, operated as a photodiode, converts individual microwave photons to electrons tunneling through the double dot, resulting in an electrical current flowing against the applied voltage bias at input powers down to 1 femto-watt. The device attains a maximum power harvesting efficienc… ▽ More We demonstrate a microwave power-to-electrical energy conversion in a resonator-coupled double quantum dot. The system, operated as a photodiode, converts individual microwave photons to electrons tunneling through the double dot, resulting in an electrical current flowing against the applied voltage bias at input powers down to 1 femto-watt. The device attains a maximum power harvesting efficiency of 2%, with the photon-to-electron conversion efficiency reaching 12% in the single photon absorption regime. We find that the power conversion depends on thermal effects showing that thermodynamics plays a crucial role in the single photon energy conversion. △ Less

Submitted 8 February, 2024; v1 submitted 27 June, 2023; originally announced June 2023.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. B 109, L081403 (2024)

High Impedance Josephson Junction Resonators in the Transmission Line Geometry

Authors: Antti Ranni, Harald Havir, Subhomoy Haldar, Ville F. Maisi

Abstract: In this article we present an experimental study of microwave resonators made out of Josephson junctions. The junctions are embedded in a transmission line geometry so that they increase the inductance per length for the line. By comparing two devices with different input/output coupling strengths, we show that the coupling capacitors, however, add a significant amount to the total capacitance of… ▽ More In this article we present an experimental study of microwave resonators made out of Josephson junctions. The junctions are embedded in a transmission line geometry so that they increase the inductance per length for the line. By comparing two devices with different input/output coupling strengths, we show that the coupling capacitors, however, add a significant amount to the total capacitance of the resonator. This makes the resonators with high coupling capacitance to act rather as lumped element resonators with inductance from the junctions and capacitance from the end sections. Based on a circuit analysis, we show that the input and output couplings of the resonator are limited to a maximum value of $ω_r Z_0 /4 Z_r$ where $ω_r$ is the resonance frequency and $Z_0$ and $Z_r$ are the characteristic impedances of the input/output lines and the resonator respectively. △ Less

Submitted 19 September, 2023; v1 submitted 22 June, 2023; originally announced June 2023.

Comments: Accepted version of the manuscript after peer-review

Journal ref: Appl. Phys. Lett. 123, 114002 (2023)

Explainable Software Defect Prediction from Cross Company Project Metrics Using Machine Learning

Authors: Susmita Haldar, Luiz Fernando Capretz

Abstract: Predicting the number of defects in a project is critical for project test managers to allocate budget, resources, and schedule for testing, support and maintenance efforts. Software Defect Prediction models predict the number of defects in given projects after training the model with historical defect related information. The majority of defect prediction studies focused on predicting defect-pron… ▽ More Predicting the number of defects in a project is critical for project test managers to allocate budget, resources, and schedule for testing, support and maintenance efforts. Software Defect Prediction models predict the number of defects in given projects after training the model with historical defect related information. The majority of defect prediction studies focused on predicting defect-prone modules from methods, and class-level static information, whereas this study predicts defects from project-level information based on a cross-company project dataset. This study utilizes software sizing metrics, effort metrics, and defect density information, and focuses on develo** defect prediction models that apply various machine learning algorithms. One notable issue in existing defect prediction studies is the lack of transparency in the developed models. Consequently, the explain-ability of the developed model has been demonstrated using the state-of-the-art post-hoc model-agnostic method called Shapley Additive exPlanations (SHAP). Finally, important features for predicting defects from cross-company project information were identified. △ Less

Submitted 14 June, 2023; originally announced June 2023.

Comments: 8 pages

Journal ref: 7th International Conference on Intelligent Computing and Control Systems (ICICCS-2023), Madurai, India, pp. 150-157, IEEE Press, May 2023

Synchronizing clocks via satellites using entangled photons: Effect of relative velocity on precision

Authors: Stav Haldar, Ivan Agullo, James E. Troupe

Abstract: A satellite-based scheme to perform clock synchronization between ground stations spread across the globe using quantum resources was proposed in [Phys. Rev. A 107, 022615 (2023)], based on the quantum clock synchronization (QCS) protocol developed in [Proc. SPIE 10547 (2018)]. Such a scheme could achieve synchronization up to the picosecond level over distances of thousands of kilometers. Nonethe… ▽ More A satellite-based scheme to perform clock synchronization between ground stations spread across the globe using quantum resources was proposed in [Phys. Rev. A 107, 022615 (2023)], based on the quantum clock synchronization (QCS) protocol developed in [Proc. SPIE 10547 (2018)]. Such a scheme could achieve synchronization up to the picosecond level over distances of thousands of kilometers. Nonetheless, the implementation of this QCS protocol is yet to be demonstrated experimentally in situations where the satellite velocities cannot be neglected, as is the case in many realistic scenarios. In this work, we develop analytical and numerical tools to study the effect of the relative velocity between the satellite and ground stations on the success of the QCS protocol. We conclude that the protocol can still run successfully if the data acquisition window is chosen appropriately. As a demonstration, we simulate the synchronization outcomes for cities across the continental United States using a single satellite in a LEO orbit, low-cost entanglement sources, portable atomic clocks, and avalanche detectors. We conclude that, after including the effect of relative motion, sub-nanosecond to picosecond level precision can still be achieved over distance scales of $\approx 4000$ kms. Such high precision synchronization is currently not achievable over long distances ($\gtrsim 100 km$) with standard classical techniques including the GPS. The simulation tools developed in this work are in principle applicable to other means of synchronizing clocks using entangled photons, which are expected to form the basis of future quantum networks like the Quantum Internet, distributed quantum sensing and Quantum GPS. △ Less

Submitted 13 June, 2023; originally announced June 2023.

Comments: 22 pages, 17 figures, 3 appendices. Comments are welcome

Interpretable Differencing of Machine Learning Models

Authors: Swagatam Haldar, Diptikalyan Saha, Dennis Wei, Rahul Nair, Elizabeth M. Daly

Abstract: Understanding the differences between machine learning (ML) models is of interest in scenarios ranging from choosing amongst a set of competing models, to updating a deployed model with new training data. In these cases, we wish to go beyond differences in overall metrics such as accuracy to identify where in the feature space do the differences occur. We formalize this problem of model differenci… ▽ More Understanding the differences between machine learning (ML) models is of interest in scenarios ranging from choosing amongst a set of competing models, to updating a deployed model with new training data. In these cases, we wish to go beyond differences in overall metrics such as accuracy to identify where in the feature space do the differences occur. We formalize this problem of model differencing as one of predicting a dissimilarity function of two ML models' outputs, subject to the representation of the differences being human-interpretable. Our solution is to learn a Joint Surrogate Tree (JST), which is composed of two conjoined decision tree surrogates for the two models. A JST provides an intuitive representation of differences and places the changes in the context of the models' decision logic. Context is important as it helps users to map differences to an underlying mental model of an AI system. We also propose a refinement procedure to increase the precision of a JST. We demonstrate, through an empirical evaluation, that such contextual differencing is concise and can be achieved with no loss in fidelity over naive approaches. △ Less

Submitted 13 June, 2023; v1 submitted 10 June, 2023; originally announced June 2023.

Comments: UAI 2023

The Brain Tumor Segmentation (BraTS) Challenge 2023: Focus on Pediatrics (CBTN-CONNECT-DIPGR-ASNR-MICCAI BraTS-PEDs)

Authors: Anahita Fathi Kazerooni, Nastaran Khalili, Xinyang Liu, Debanjan Haldar, Zhifan Jiang, Syed Muhammed Anwar, Jake Albrecht, Maruf Adewole, Udunna Anazodo, Hannah Anderson, Sina Bagheri, Ujjwal Baid, Timothy Bergquist, Austin J. Borja, Evan Calabrese, Verena Chung, Gian-Marco Conte, Farouk Dako, James Eddy, Ivan Ezhov, Ariana Familiar, Keyvan Farahani, Shuvanjan Haldar, Juan Eugenio Iglesias, Anastasia Janas , et al. (48 additional authors not shown)

Abstract: Pediatric tumors of the central nervous system are the most common cause of cancer-related death in children. The five-year survival rate for high-grade gliomas in children is less than 20\%. Due to their rarity, the diagnosis of these entities is often delayed, their treatment is mainly based on historic treatment concepts, and clinical trials require multi-institutional collaborations. The MICCA… ▽ More Pediatric tumors of the central nervous system are the most common cause of cancer-related death in children. The five-year survival rate for high-grade gliomas in children is less than 20\%. Due to their rarity, the diagnosis of these entities is often delayed, their treatment is mainly based on historic treatment concepts, and clinical trials require multi-institutional collaborations. The MICCAI Brain Tumor Segmentation (BraTS) Challenge is a landmark community benchmark event with a successful history of 12 years of resource creation for the segmentation and analysis of adult glioma. Here we present the CBTN-CONNECT-DIPGR-ASNR-MICCAI BraTS-PEDs 2023 challenge, which represents the first BraTS challenge focused on pediatric brain tumors with data acquired across multiple international consortia dedicated to pediatric neuro-oncology and clinical trials. The BraTS-PEDs 2023 challenge focuses on benchmarking the development of volumentric segmentation algorithms for pediatric brain glioma through standardized quantitative performance evaluation metrics utilized across the BraTS 2023 cluster of challenges. Models gaining knowledge from the BraTS-PEDs multi-parametric structural MRI (mpMRI) training data will be evaluated on separate validation and unseen test mpMRI dataof high-grade pediatric glioma. The CBTN-CONNECT-DIPGR-ASNR-MICCAI BraTS-PEDs 2023 challenge brings together clinicians and AI/imaging scientists to lead to faster development of automated segmentation techniques that could benefit clinical trials, and ultimately the care of children with brain tumors. △ Less

Submitted 23 May, 2024; v1 submitted 26 May, 2023; originally announced May 2023.

Many-body effects in the out-of-equilibrium dynamics of a composite bosonic Josephson junction

Authors: Sudip Kumar Haldar, Anal Bhowmik, Ofir E. Alon

Abstract: The out-of-equilibrium many-body quantum dynamics of an interacting Bose gas trapped in a one-dimensional composite double-well potential is studied by solving the many-body Schrödinger equation numerically accurately by employing the multiconfigurational time-dependent Hartree for bosons (MCTDHB) method. The composite double-well is formed by merging two deformed harmonic wells having a hump at t… ▽ More The out-of-equilibrium many-body quantum dynamics of an interacting Bose gas trapped in a one-dimensional composite double-well potential is studied by solving the many-body Schrödinger equation numerically accurately by employing the multiconfigurational time-dependent Hartree for bosons (MCTDHB) method. The composite double-well is formed by merging two deformed harmonic wells having a hump at their centre. We characterised the dynamics by the time evolution of survival probability, fragmentation, and many-particle position and momentum variances. Our study demonstrates the prominent role played by the higher orbitals in the dynamics and thereby highlighted the necessity of a many-body technique like MCTDHB which can take into account all the relevant orbitals for the accurate description of complex many-body dynamics. Further, we showed that the universality of fragmentation with respect to the number of particles corresponding to a particular interaction strength is also exhibited by the higher-order orbitals. Therefore, it is a robust phenomenon not limited to systems that can be described by two orbitals only. △ Less

Submitted 26 March, 2023; originally announced March 2023.

Quantum Dot Source-Drain Transport Response at Microwave Frequencies

Authors: Harald Havir, Subhomoy Haldar, Waqar Khan, Sebastian Lehmann, Kimberly A. Dick, Claes Thelander, Peter Samuelsson, Ville F. Maisi

Abstract: Quantum dots are frequently used as charge sensitive devices in low temperature experiments to probe electric charge in mesoscopic conductors where the current running through the quantum dot is modulated by the nearby charge environment. Recent experiments have been operating these detectors using reflectometry measurements up to GHz frequencies rather than probing the low frequency current throu… ▽ More Quantum dots are frequently used as charge sensitive devices in low temperature experiments to probe electric charge in mesoscopic conductors where the current running through the quantum dot is modulated by the nearby charge environment. Recent experiments have been operating these detectors using reflectometry measurements up to GHz frequencies rather than probing the low frequency current through the dot. In this work, we use an on-chip coplanar waveguide resonator to measure the source-drain transport response of two quantum dots at a frequency of 6 GHz, further increasing the bandwidth limit for charge detection. Similar to the low frequency domain, the response is here predominantly dissipative. For large tunnel coupling, the response is still governed by the low frequency conductance, in line with Landauer-Büttiker theory. For smaller couplings, our devices showcase two regimes where the high frequency response deviates from the low frequency limit and Landauer-Büttiker theory: When the photon energy exceeds the quantum dot resonance linewidth, degeneracy dependent plateaus emerge. These are reproduced by sequential tunneling calculations. In the other case with large asymmetry in the tunnel couplings, the high frequency response is two orders of magnitude larger than the low frequency conductance G, favoring the high frequency readout. △ Less

Submitted 23 March, 2023; originally announced March 2023.

Comments: 12 pages 5 figures

Teach a Robot to FISH: Versatile Imitation from One Minute of Demonstrations

Authors: Siddhant Haldar, Jyothish Pari, Anant Rai, Lerrel Pinto

Abstract: While imitation learning provides us with an efficient toolkit to train robots, learning skills that are robust to environment variations remains a significant challenge. Current approaches address this challenge by relying either on large amounts of demonstrations that span environment variations or on handcrafted reward functions that require state estimates. Both directions are not scalable to… ▽ More While imitation learning provides us with an efficient toolkit to train robots, learning skills that are robust to environment variations remains a significant challenge. Current approaches address this challenge by relying either on large amounts of demonstrations that span environment variations or on handcrafted reward functions that require state estimates. Both directions are not scalable to fast imitation. In this work, we present Fast Imitation of Skills from Humans (FISH), a new imitation learning approach that can learn robust visual skills with less than a minute of human demonstrations. Given a weak base-policy trained by offline imitation of demonstrations, FISH computes rewards that correspond to the "match" between the robot's behavior and the demonstrations. These rewards are then used to adaptively update a residual policy that adds on to the base-policy. Across all tasks, FISH requires at most twenty minutes of interactive learning to imitate demonstrations on object configurations that were not seen in the demonstrations. Importantly, FISH is constructed to be versatile, which allows it to be used across robot morphologies (e.g. xArm, Allegro, Stretch) and camera configurations (e.g. third-person, eye-in-hand). Our experimental evaluations on 9 different tasks show that FISH achieves an average success rate of 93%, which is around 3.8x higher than prior state-of-the-art methods. △ Less

Submitted 2 March, 2023; originally announced March 2023.

Comments: Code and robot videos are available at https://fast-imitation.github.io/

Optimizing the phase sensitivity of a Michelson interferometer with a two mode squeezed coherent input

Authors: Stav Haldar, Pratik J. Barge, Xiao-Qi Xiao, Hwang Lee

Abstract: A Michelson-type interferometer with two-mode squeezed coherent state input is considered. Such an interferometer has a better phase sensitivity over the shot-noise limit by a factor of $e^{2r}$, where $r$ is the squeezing parameter [Phys. Rev. A 102,022614 (2020)]. We show that when photon loss and noise in the two arms is asymmetric an optimal choice of the squeezing angle can allow improvement… ▽ More A Michelson-type interferometer with two-mode squeezed coherent state input is considered. Such an interferometer has a better phase sensitivity over the shot-noise limit by a factor of $e^{2r}$, where $r$ is the squeezing parameter [Phys. Rev. A 102,022614 (2020)]. We show that when photon loss and noise in the two arms is asymmetric an optimal choice of the squeezing angle can allow improvement in phase sensitivity without any increase in input or pump power. In particular, when loss occurs only in one arm of the interferometer, we can have improvement in phase sensitivity for photon loss up to 80\%. Hence, a significant improvement can be made in several applications such as LiDAR, gyroscopes and measuring refractive indices of highly absorptive/reflective materials. △ Less

Submitted 2 March, 2023; originally announced March 2023.

Comments: 8 pages, 4 figures. Comments are welcome

Fast and reliable entanglement distribution with quantum repeaters: principles for improving protocols using reinforcement learning

Authors: Stav Haldar, Pratik J. Barge, Sumeet Khatri, Hwang Lee

Abstract: Future quantum technologies such as quantum communication, quantum sensing, and distributed quantum computation, will rely on networks of shared entanglement between spatially separated nodes. In this work, we provide improved protocols/policies for entanglement distribution along a linear chain of nodes, both homogeneous and inhomogeneous, that take practical limitations such as photon losses, no… ▽ More Future quantum technologies such as quantum communication, quantum sensing, and distributed quantum computation, will rely on networks of shared entanglement between spatially separated nodes. In this work, we provide improved protocols/policies for entanglement distribution along a linear chain of nodes, both homogeneous and inhomogeneous, that take practical limitations such as photon losses, non-ideal measurements, and quantum memories with short coherence times into account. For a wide range of parameters, our policies improve upon previously known policies, such as the "swap-as-soon-as-possible" policy, with respect to both the waiting time and the fidelity of the end-to-end entanglement. This improvement is greatest for the most practically relevant cases, namely, for short coherence times, high link losses, and highly asymmetric links. To obtain our results, we model entanglement distribution using a Markov decision process, and then we use the Q-learning reinforcement learning (RL) algorithm to discover new policies. These new policies are characterized by dynamic, state-dependent memory cutoffs and collaboration between the nodes. In particular, we quantify this collaboration between the nodes. Our quantifiers tell us how much "global" knowledge of the network every node has. Finally, our understanding of the performance of large quantum networks is currently limited by the computational inefficiency of simulating them using RL or other optimization methods. Thus, in this work, we present a method for nesting policies in order to obtain policies for large repeater chains. By nesting our RL-based policies for small repeater chains, we obtain policies for large repeater chains that improve upon the swap-as-soon-as-possible policy, and thus we pave the way for a scalable method for obtaining policies for long-distance entanglement distribution. △ Less

Submitted 31 March, 2024; v1 submitted 1 March, 2023; originally announced March 2023.

Comments: Version 4, Published version. Comments are welcome

Journal ref: Phys. Rev. Applied 21, 024041 (2024)

Spontaneous square vs. hexagonal nanoscale skyrmion lattices in Fe/Ir(111)

Authors: Mara Gutzeit, Tim Drevelow, Moritz A. Goerzen, Soumyajyoti Haldar, Stefan Heinze

Abstract: We study the emergence of spontaneous skyrmion lattices in an Fe monolayer in fcc and hcp stacking on the Ir(111) surface using density functional theory (DFT). For fcc-Fe/Ir(111) we find the well-known square nanoskyrmion lattice. However, for hcp-Fe/Ir(111) the hexagonal skyrmion lattice previously proposed based on experiments is energetically unfavorable with respect to a hexagonal multi-Q sta… ▽ More We study the emergence of spontaneous skyrmion lattices in an Fe monolayer in fcc and hcp stacking on the Ir(111) surface using density functional theory (DFT). For fcc-Fe/Ir(111) we find the well-known square nanoskyrmion lattice. However, for hcp-Fe/Ir(111) the hexagonal skyrmion lattice previously proposed based on experiments is energetically unfavorable with respect to a hexagonal multi-Q state with nearly collinear magnetic moments. By map** our DFT calculations to an atomistic spin model we demonstrate that the interplay of pair-wise exchange, higher-order exchange, and Dzyaloshinskii-Moriya interaction is decisive for the symmetry and collinearity of the obtained spin lattice. △ Less

Submitted 6 July, 2023; v1 submitted 31 January, 2023; originally announced January 2023.

A numerical study of measurement-induced phase transitions in the Sachdev-Ye-Kitaev model

Authors: Stav Haldar, Anthony J. Brady

Abstract: Continuous monitoring of an otherwise closed quantum system has been found to lead to a measurement-induced phase transition (MIPT) characterized by abrupt changes in the entanglement or purity of the many-body quantum state. For an entanglement MIPT, entangling dynamics compete with measurement dynamics, pushing the system either to a phase with extensive entanglement or to a phase with low-level… ▽ More Continuous monitoring of an otherwise closed quantum system has been found to lead to a measurement-induced phase transition (MIPT) characterized by abrupt changes in the entanglement or purity of the many-body quantum state. For an entanglement MIPT, entangling dynamics compete with measurement dynamics, pushing the system either to a phase with extensive entanglement or to a phase with low-level entanglement. For purification MIPTs, projective measurements effectively cool and localize the system, inducing a transition from a mixed state to an uncorrelated pure state. In this work, we numerically simulate monitored dynamics in the all-to-all Sachdev-Ye-Kitaev (SYK) model for finite N. We witness both entanglement and purification MIPTs in the steady-state. It is often said that there is an equivalence between entanglement and purification MIPTs, however we provide numerical evidence to the contrary, implying that entanglement and purification MIPTs are indeed two distinct phenomena. The reason for such a distinction is quite simple: entanglement can revive after a completely projective measurement -- if measurements do not occur too often in time -- but impurity cannot. △ Less

Submitted 12 January, 2023; originally announced January 2023.

Comments: 11 pages; 10 figures. Comments welcome/encouraged

Predicting Topological Quantum Phase Transition via Multipartite Entanglement from Dynamics

Authors: Leela Ganesh Chandra Lakkaraju, Sudip Kumar Haldar, Aditi Sen De

Abstract: An exactly solvable Kitaev model in a two-dimensional square lattice exhibits a topological quantum phase transition which is different from the symmetry-breaking transition at zero temperature. When the ground state of a non-linearly perturbed Kitaev model with different strengths of perturbation taken as the initial state is quenched to a pure Kitaev model, we demonstrate that various features o… ▽ More An exactly solvable Kitaev model in a two-dimensional square lattice exhibits a topological quantum phase transition which is different from the symmetry-breaking transition at zero temperature. When the ground state of a non-linearly perturbed Kitaev model with different strengths of perturbation taken as the initial state is quenched to a pure Kitaev model, we demonstrate that various features of the dynamical state, such as Loschmidt echo, time-averaged multipartite entanglement, can determine whether the initial state belongs to the topological phase or not. Moreover, the derivatives of the quantifiers can faithfully identify the topological quantum phase transition, present in equilibrium. When the individual qubits of the lattice interact with the local thermal bath repeatedly, we observe that block entanglement can nevertheless distinguish the phases from which the system starts evolution. △ Less

Submitted 26 December, 2022; originally announced December 2022.

Comments: 10 pages, 5 figures

Tuning the magnetic interactions in van der Waals Fe$_3$GeTe$_2$ heterostructures: A comparative study of \textit{ab initio} methods

Authors: Dongzhe Li, Soumyajyoti Haldar, Tim Drevelow, Stefan Heinze

Abstract: We investigate the impact of mechanical strain, stacking order, and external electric fields on the magnetic interactions of a two-dimensional (2D) van der Waals (vdW) heterostructure in which a 2D ferromagnetic metallic Fe$_3$GeTe$_2$ monolayer is deposited on germanene. Three distinct computational approaches based on \textit{ab initio} methods are used, and a careful comparison is given: (i) Th… ▽ More We investigate the impact of mechanical strain, stacking order, and external electric fields on the magnetic interactions of a two-dimensional (2D) van der Waals (vdW) heterostructure in which a 2D ferromagnetic metallic Fe$_3$GeTe$_2$ monolayer is deposited on germanene. Three distinct computational approaches based on \textit{ab initio} methods are used, and a careful comparison is given: (i) The Green's function method, (ii) the generalized Bloch theorem, and (iii) the supercell approach. First, the shell-resolved exchange constants are calculated for the three Fe atoms within the unit cell of the freestanding Fe$_3$GeTe$_2$ monolayer. We find that the results between methods (i) and (ii) are in good qualitative agreement and also with previously reported values. An electric field of ${\cal E}= \pm 0.5$~V/Å applied perpendicular to the Fe$_3$GeTe$_2$/germanene heterostructure leads to significant changes of the exchange constants. We show that the Dzyaloshinskii-Moriya interaction (DMI) in Fe$_3$GeTe$_2$/germanene is mainly dominated by the nearest neighbors, resulting in a good quantitative agreement between methods (i) and (ii). Furthermore, we demonstrate that the DMI is highly tunable by strain, stacking, and electric field, leading to a large DMI comparable to that of ferromagnetic/heavy metal (FM/HM) interfaces. The geometrical change and hybridization effect explain the origin of the high tunability of the DMI at the interface. The electric-field driven DMI obtained by method (iii) is in qualitative agreement with the more accurate \textit{ab initio} method used in approach (ii). However, the field-effect on the DMI is overestimated by method (iii) by about 50\%. The magnetocrystalline anisotropy energy can also be drastically changed by the application of compressive or tensile strain in the Fe$_3$GeTe$_2$/germanene heterostructure. △ Less

Submitted 13 February, 2023; v1 submitted 27 October, 2022; originally announced October 2022.

Comments: 15 pages, 12 figures

Journal ref: Phys. Rev. B 107, 104428 (2023)

Quantum Clock Synchronization for Future NASA Deep Space Quantum Links and Fundamental Science

Authors: James Troupe, Stav Haldar, Ivan Agullo, Paul Kwiat

Abstract: The ability to measure, hold and distribute time with high precision and accuracy is a foundational capability for scientific exploration. Beyond fundamental science, time synchronization is an indispensable feature of public and private communication, navigation and ranging, and distributed sensing, amongst others technological applications. We propose the implementation of a quantum network of s… ▽ More The ability to measure, hold and distribute time with high precision and accuracy is a foundational capability for scientific exploration. Beyond fundamental science, time synchronization is an indispensable feature of public and private communication, navigation and ranging, and distributed sensing, amongst others technological applications. We propose the implementation of a quantum network of satellite- and ground-based clocks with the ability to implement Quantum Clock Synchronization to picosecond accuracy. Implementation of the proposed QCS network offers a double advantage: (1) a more accurate, robust, and secure time synchronization network for classical applications than currently possible, and (2) a resource to fulfill the much more stringent synchronization requirements of future quantum communication networks. △ Less

Submitted 29 September, 2022; originally announced September 2022.

Comments: Topical white paper submitted for the Decadal Survey on Biological and Physical Sciences Research in Space 2023-2032. Comments are welcome

Global Time Distribution via Satellite-Based Sources of Entangled Photons

Authors: Stav Haldar, Ivan Agullo, Anthony J. Brady, Antía Lamas-Linares, W. Cyrus Proctor, James E. Troupe

Abstract: We propose a satellite-based scheme to perform clock synchronization between ground stations spread across the globe using quantum resources. We refer to this as a quantum clock synchronization (QCS) network. Through detailed numerical simulations, we assess the feasibility and capabilities of a near-term implementation of this scheme. We consider a small constellation of nanosatellites equipped o… ▽ More We propose a satellite-based scheme to perform clock synchronization between ground stations spread across the globe using quantum resources. We refer to this as a quantum clock synchronization (QCS) network. Through detailed numerical simulations, we assess the feasibility and capabilities of a near-term implementation of this scheme. We consider a small constellation of nanosatellites equipped only with modest resources. These include quantum devices such as spontaneous parametric down conversion (SPDC) sources, avalanche photo-detectors (APDs), and moderately stable on-board clocks such as chip scale atomic clocks (CSACs). In our simulations, the various performance parameters describing the hardware have been chosen such that they are either already commercially available, or require only moderate advances. We conclude that with such a scheme establishing a global network of ground based clocks synchronized to sub-nanosecond level (up to a few picoseconds) of precision, would be feasible. Such QCS satellite constellations would form the infrastructure for a future quantum network, able to serve as a globally accessible entanglement resource. At the same time, our clock synchronization protocol, provides the sub-nanosecond level synchronization required for many quantum networking protocols, and thus, can be seen as adding an extra layer of utility to quantum technologies in the space domain designed for other purposes. △ Less

Submitted 29 September, 2022; originally announced September 2022.

Comments: 20 pages, 12 figures and 6 tables. Comments are welcome

Using HCI in Cross-Disciplinary Teams: A Case Study of Academic Collaboration in HCI-Health Teams in the US Using a Team Science Perspective

Authors: Elena Agapie, Shefali Haldar, Sharmaine Galvez Poblete

Abstract: Human-centered computing research has been increasingly applied to address important challenges in the health domain. Conducting research in cross-disciplinary teams can come with a lot of challenges in integrating knowledge across fields. Yet, we do not know what challenges HCI researchers encounter in building collaborations with health researchers, and how these researchers negotiate challenges… ▽ More Human-centered computing research has been increasingly applied to address important challenges in the health domain. Conducting research in cross-disciplinary teams can come with a lot of challenges in integrating knowledge across fields. Yet, we do not know what challenges HCI researchers encounter in building collaborations with health researchers, and how these researchers negotiate challenges while balancing their professional goals. We interviewed 17 early- and mid-career HCI faculty working in the United States who conducted research in collaboration with health researchers. Drawing from a Team Science framework, we share participants' lived experiences and identify major challenges that HCI researchers encounter when finding, collaborating with, and negotiating with health collaborators when building technologies. We propose ways to better support research collaboration aimed at designing technologies using human-centered computing approaches. This includes strategies to support HCI researchers at individual, institutional, research community, and funding agencies levels through tools to translate disciplinary approaches. We suggest institutional policies to support HCI researchers through training, networking, and promotion. △ Less

Submitted 1 September, 2022; originally announced September 2022.

Comments: To appear in Proceedings of the ACM: Human-Computer Interaction, Volume 6, Issue CSCW 2022

Strain-Driven Zero-Field Near-10 nm Skyrmions in Two-Dimensional van der Waals Heterostructures

Authors: Dongzhe Li, Soumyajyoti Haldar, Stefan Heinze

Abstract: Magnetic skyrmions $-$ localized chiral spin structures $-$ show great promise for spintronic applications. The recent discovery of two-dimensional (2D) magnetic materials opened new opportunities for exploring such topological spin structures in atomically thin van der Waals (vdW) materials. Despite recent progress in stabilizing metastable skyrmions in 2D magnets, their diameters are still beyon… ▽ More Magnetic skyrmions $-$ localized chiral spin structures $-$ show great promise for spintronic applications. The recent discovery of two-dimensional (2D) magnetic materials opened new opportunities for exploring such topological spin structures in atomically thin van der Waals (vdW) materials. Despite recent progress in stabilizing metastable skyrmions in 2D magnets, their diameters are still beyond 100~nm and their lifetime, which is essential for applications, has not been explored yet. Here, using first-principles calculations and atomistic spin simulations, we predict that compressive mechanical strain leads to stabilizing zero-field skyrmions with diameters close to 10 nm in a Fe$_3$GeTe$_2$/germanene vdW heterostructure. The origin of these unique skyrmions is attributed to the high tunability of Dzyaloshinskii-Moriya interaction and magnetocrystalline anisotropy energy by strain, an effect which is shown to be general for Fe$_3$GeTe$_2$ heterostructures with buckled substrates. Based on our first-principles parameters for the magnetic interactions, we calculate the energy barriers protecting skyrmions against annihilation and their lifetimes using transition-state theory. We show that nanoscale skyrmions in strained Fe$_3$GeTe$_2$/germanene can be stable for hours at temperatures up to 20 K. △ Less

Submitted 19 August, 2022; originally announced August 2022.

Journal ref: Nano Lett. 22, 7706-7713 (2022)

Energetics of microwaves probed by double quantum dot absorption

Authors: Subhomoy Haldar, Harald Havir, Waqar Khan, Sebastian Lehmann, Claes Thelander, Kimberly A. Dick, Ville F. Maisi

Abstract: We explore the energetics of microwaves interacting with a double quantum dot photodiode and show wave-particle aspects in photon-assisted tunneling. The experiments show that the single photon energy sets the relevant absorption energy in a weak-drive limit, which contrasts the strong drive limit where the wave amplitude determines the relevant-energy scale and opens up microwave induced bias tri… ▽ More We explore the energetics of microwaves interacting with a double quantum dot photodiode and show wave-particle aspects in photon-assisted tunneling. The experiments show that the single photon energy sets the relevant absorption energy in a weak-drive limit, which contrasts the strong drive limit where the wave amplitude determines the relevant-energy scale and opens up microwave induced bias triangles. The threshold condition between these two regimes is set by the fine-structure constant of the system. The energetics are determined here with the detuning conditions of the double dot system and stop**-potential measurements that constitute a microwave version of the photoelectric effect. △ Less

Submitted 22 December, 2022; v1 submitted 2 August, 2022; originally announced August 2022.

Comments: 5 pages 4 figures

Watch and Match: Supercharging Imitation with Regularized Optimal Transport

Authors: Siddhant Haldar, Vaibhav Mathur, Denis Yarats, Lerrel Pinto

Abstract: Imitation learning holds tremendous promise in learning policies efficiently for complex decision making problems. Current state-of-the-art algorithms often use inverse reinforcement learning (IRL), where given a set of expert demonstrations, an agent alternatively infers a reward function and the associated optimal policy. However, such IRL approaches often require substantial online interactions… ▽ More Imitation learning holds tremendous promise in learning policies efficiently for complex decision making problems. Current state-of-the-art algorithms often use inverse reinforcement learning (IRL), where given a set of expert demonstrations, an agent alternatively infers a reward function and the associated optimal policy. However, such IRL approaches often require substantial online interactions for complex control problems. In this work, we present Regularized Optimal Transport (ROT), a new imitation learning algorithm that builds on recent advances in optimal transport based trajectory-matching. Our key technical insight is that adaptively combining trajectory-matching rewards with behavior cloning can significantly accelerate imitation even with only a few demonstrations. Our experiments on 20 visual control tasks across the DeepMind Control Suite, the OpenAI Robotics Suite, and the Meta-World Benchmark demonstrate an average of 7.8X faster imitation to reach 90% of expert performance compared to prior state-of-the-art methods. On real-world robotic manipulation, with just one demonstration and an hour of online training, ROT achieves an average success rate of 90.1% across 14 tasks. △ Less

Submitted 20 February, 2023; v1 submitted 30 June, 2022; originally announced June 2022.

Comments: Code and robot videos are available on https://rot-robot.github.io/

Study of the Berezinskii-Kosterlitz-Thouless transition: An unsupervised machine learning approach

Authors: Sumit Haldar, Sk Saniur Rahaman, Manoranjan Kumar

Abstract: The Berezinskii-Kosterlitz-Thouless (BKT) transition in magnetic system is an intriguing phenomena and an accurate estimation of the BKT transition temperature has been a long-standing problem. In this work we explore the anisotropic classical Heisenberg XY and XXZ models with ferromagnetic exchange on a square lattice and antiferromagnetic exchange on a triangular lattice using an unsupervised ma… ▽ More The Berezinskii-Kosterlitz-Thouless (BKT) transition in magnetic system is an intriguing phenomena and an accurate estimation of the BKT transition temperature has been a long-standing problem. In this work we explore the anisotropic classical Heisenberg XY and XXZ models with ferromagnetic exchange on a square lattice and antiferromagnetic exchange on a triangular lattice using an unsupervised machine learning approach called principal component analysis (PCA). In earlier studies of the BKT transition, spin configurations and vorticities calculated from Monte Carlo method are used to determine the transition temperature $T_{BKT}$, but those methods fail to give any conclusive results by analyzing the principal components in the PCA approach. In this work vorticities are used as initial input to the PCA and curve of the first principal component with temperature is fitted with a function to determine an accurate value of $T_{BKT}$. This procedure works well for anisotropic classical Heisenberg with ferromagnetic exchange on square lattice as well as for frustrated antiferromagnetic exchange on a triangular lattice. The classical anisotropic Heisenberg antiferromagnetic model on the triangular lattice has two close transitions; the BKT at $T_{BKT}$ and Ising like phase transition for chirality at $T_c$ and it is difficult to separate these transition points. It is also noted that using the PCA method and manipulation of their first principal component, not only separation of transition points are possible but also transition temperature can be determined accurately. △ Less

Submitted 30 May, 2022; originally announced May 2022.

Comments: 8 pages, 8 figures

Nano-scale collinear multi-Q states driven by higher-order interactions

Authors: Mara Gutzeit, André Kubetzka, Soumyajyoti Haldar, Henning Pralow, Roland Wiesendanger, Stefan Heinze, Kirsten von Bergmann

Abstract: Complex magnetic order arises due to the competition of different interactions between the magnetic moments. Recently, there has been an increased interest in such states not only to unravel the fundamental physics involved, but also with regards to applications exploiting their unique interplay with moving electrons. Whereas it is the Dzyaloshinskii-Moriya interaction (DMI) that has attracted muc… ▽ More Complex magnetic order arises due to the competition of different interactions between the magnetic moments. Recently, there has been an increased interest in such states not only to unravel the fundamental physics involved, but also with regards to applications exploiting their unique interplay with moving electrons. Whereas it is the Dzyaloshinskii-Moriya interaction (DMI) that has attracted much attention because of its nature to induce non-collinear magnetic order including magnetic-field stabilized skyrmions, it is the frustration of exchange interactions that can drive magnetic order down to the nano-scale. On top of that, interactions between multiple spins can stabilize two-dimensional magnetic textures as zero-field ground states, known as multi-Q states. Here, we introduce a two-dimensional itinerant magnet with various competing atomic-scale magnetic phases. Using spin-polarized scanning tunneling microscopy we observe several zero-field uniaxial or hexagonal nano-scale magnetic states. First-principles calculations together with an atomistic spin model reveal that these states are stabilized by the interplay of frustrated exchange and higher-order interactions while the DMI is weak. Unexpectedly, it is found that not only non-collinear magnetic states arise, but that higher-order interactions can also lead to collinear nano-scale multi-Q states. △ Less

Submitted 4 April, 2022; originally announced April 2022.

Comments: 32 pages including methods and additional information, 6 figures and 5 additional figures

Machine learning approach to study quantum phases of a frustrated one dimensional spin-1/2 system

Authors: Sk Saniur Rahaman, Sumit Haldar, Manoranjan Kumar

Abstract: Frustration driven quantum fluctuation leads to many exotic phases in the ground state and study of these quantum phase transitions is one of the most challenging areas of research in condensed matter physics. Here, a frustrated Heisenberg $J_1-J_2$ model of spin-1/2 chain with nearest exchange interaction $J_1$ and next nearest exchange interaction $J_2$ is studied using the principal component a… ▽ More Frustration driven quantum fluctuation leads to many exotic phases in the ground state and study of these quantum phase transitions is one of the most challenging areas of research in condensed matter physics. Here, a frustrated Heisenberg $J_1-J_2$ model of spin-1/2 chain with nearest exchange interaction $J_1$ and next nearest exchange interaction $J_2$ is studied using the principal component analysis (PCA) which is an unsupervised machine learning technique. In this method most probable spin configurations (MPSC) of ground-state (GS) and first excited state (FES) for different $J_2/J_1$ are used as the input in PCA to construct the co-variance matrix. The `quantified principal component' of the largest eigenvalue of co-variance matrix $p_1(J_2/J_1)$ is calculated and it is shown that the nature and variation of $p_1(J_2/J_1)$ can accurately predict the phase transitions and degeneracies in the GS. The $p_1(J_2/J_1)$ calculated from the MPSC of GS can only exhibit the signature of degeneracies in the GS, whereas, $p_1(J_2/J_1)$ calculated from MPSC of FES captures the gapless spin liquid (GSL)-dimer phase transition as well as all the degeneracies of the model system. We show that jump in $p_1(J_2/J_1)$ of FES at $J_2/J_1 \approx 0.241$, indicates the GSL-dimer phase transition, whereas its kinks give the signature of the GS degeneracies. The scatter plot of first two principal components of FES shows distinct band formation for different phases. △ Less

Submitted 1 February, 2022; originally announced February 2022.

Comments: 7 pages, 4 figures

Automated Testing of AI Models

Authors: Swagatam Haldar, Deepak Vijaykeerthy, Diptikalyan Saha

Abstract: The last decade has seen tremendous progress in AI technology and applications. With such widespread adoption, ensuring the reliability of the AI models is crucial. In past, we took the first step of creating a testing framework called AITEST for metamorphic properties such as fairness, robustness properties for tabular, time-series, and text classification models. In this paper, we extend the cap… ▽ More The last decade has seen tremendous progress in AI technology and applications. With such widespread adoption, ensuring the reliability of the AI models is crucial. In past, we took the first step of creating a testing framework called AITEST for metamorphic properties such as fairness, robustness properties for tabular, time-series, and text classification models. In this paper, we extend the capability of the AITEST tool to include the testing techniques for Image and Speech-to-text models along with interpretability testing for tabular models. These novel extensions make AITEST a comprehensive framework for testing AI models. △ Less

Submitted 7 October, 2021; originally announced October 2021.

Comments: 5 pages, 3 Figures, 4 Tables

A Similarity Transformed Second-order Approximate Coupled Cluster Method for the Excited States: Theory, Implementation, and Benchmark

Authors: Soumi Haldar, Achintya Kumar Dutta

Abstract: We present a novel and cost-effective approach of using a second similarity transformation of the Hamiltonian to include the missing higher-order terms in the second-order approximate coupled cluster singles and doubles (CC2) model. The performance of the newly developed ST-CC2 model has been investigated for the calculation of excitation energies of valence, Rydberg, and charge-transfer excited s… ▽ More We present a novel and cost-effective approach of using a second similarity transformation of the Hamiltonian to include the missing higher-order terms in the second-order approximate coupled cluster singles and doubles (CC2) model. The performance of the newly developed ST-CC2 model has been investigated for the calculation of excitation energies of valence, Rydberg, and charge-transfer excited states. The method shows significant improvement in the excitation energies of Rydberg and charge-transfer excited states as compared to the conventional CC2 method while retaining the good performance of the latter for the valence excited state. The method retains the charge-transfer separability of the CT excited states, which is a significant advantage over the traditional CC2 method. An MBPT2 variant of the new method is also proposed. △ Less

Submitted 27 July, 2021; v1 submitted 25 June, 2021; originally announced June 2021.

Topological-chiral magnetic interactions in ultrathin films at surfaces

Authors: Soumyajyoti Haldar, Sebastian Meyer, André Kubetzka, Stefan Heinze

Abstract: We demonstrate that topological-chiral magnetic interactions can play a key role for magnetic ground states in ultrathin films at surfaces. Based on density functional theory we show that significant chiral-chiral interactions occur in hexagonal Mn monolayers due to large topological orbital moments which interact with the emergent magnetic field. Due to the competition with higher-order exchange… ▽ More We demonstrate that topological-chiral magnetic interactions can play a key role for magnetic ground states in ultrathin films at surfaces. Based on density functional theory we show that significant chiral-chiral interactions occur in hexagonal Mn monolayers due to large topological orbital moments which interact with the emergent magnetic field. Due to the competition with higher-order exchange interactions superposition states of spin spirals such as the 2Q state or a distorted 3Q state arise. Simulations of spin-polarized scanning tunneling microscopy images suggest that the distorted 3Q state could be the magnetic ground state of a Mn monolayer on Re(0001). △ Less

Submitted 16 June, 2021; originally announced June 2021.

Trends of higher-order exchange interactions in transition-metal trilayers

Authors: Mara Gutzeit, Soumyajyoti Haldar, Sebastian Meyer, Stefan Heinze

Abstract: We present a systematic study of higher-order exchange interactions beyond the pair-wise Heisenberg exchange in transition-metal trilayers based on density functional theory calculations. We show that these terms can play an important role in magnetic trilayers composed of a single hexagonal Fe or Co atomic layer sandwiched between $4d$ and $5d$ transition-metal layers. We study the dependence of… ▽ More We present a systematic study of higher-order exchange interactions beyond the pair-wise Heisenberg exchange in transition-metal trilayers based on density functional theory calculations. We show that these terms can play an important role in magnetic trilayers composed of a single hexagonal Fe or Co atomic layer sandwiched between $4d$ and $5d$ transition-metal layers. We study the dependence of the biquadratic and the three-site and four-site four spin interaction on the band filling of the $4d$ and $5d$ layers as well as the stacking sequence, i.e. fcc vs. hcp stacking. Our calculations reveal relatively small higher-order interactions for Co based trilayers. For Fe based trilayers with a Rh or Ir layer the higher-order terms can be on the same order of magnitude as pair-wise Heisenberg exchange. The trends obtained for freestanding trilayers are used to understand the higher-order interactions in ultrathin film systems on surfaces that are experimentally accessible. It is shown that hcp Rh/Fe/Ir(111) and hcp-Rh/Fe/Rh(111) exhibit the largest values for the biquadratic and the three-site four spin interaction of all systems under study. We further demonstrate that the three-site four spin interaction is responsible for the experimentally observed change of the magnetic ground state of Rh/Fe/Ir(111) from a spin spiral (single-Q) for fcc-Rh to a 2Q state for hcp-Rh. We find similar trends for Rh/Fe/Rh(111), i.e. replacing the Ir surface by the isoelectronic Rh surface. For Rh/Co/Ir(111), we obtain a negative value for the four-site four spin interaction which will lead to a reduced stability of magnetic skyrmions which are metastable in this film at zero magnetic field. In contrast, for Pd/Fe/Ir(111), the four-site four spin interaction is positive which leads to an enhanced stability of skyrmions. △ Less

Submitted 21 April, 2021; originally announced April 2021.

Journal ref: Phys. Rev. B 104, 024420 (2021)