Showing 1–4 of 4 results for author: Haj-Yahya, J

IChannels: Exploiting Current Management Mechanisms to Create Covert Channels in Modern Processors

Authors: Jawad Haj-Yahya, Jeremie S. Kim, A. Giray Yaglikci, Ivan Puddu, Lois Orosa, Juan Gómez Luna, Mohammed Alser, Onur Mutlu

Abstract: To operate efficiently across a wide range of workloads with varying power requirements, a modern processor applies different current management mechanisms, which briefly throttle instruction execution while they adjust voltage and frequency to accommodate for power-hungry instructions (PHIs) in the instruction stream. Doing so 1) reduces the power consumption of non-PHI instructions in typical wo… ▽ More To operate efficiently across a wide range of workloads with varying power requirements, a modern processor applies different current management mechanisms, which briefly throttle instruction execution while they adjust voltage and frequency to accommodate for power-hungry instructions (PHIs) in the instruction stream. Doing so 1) reduces the power consumption of non-PHI instructions in typical workloads and 2) optimizes system voltage regulators' cost and area for the common use case while limiting current consumption when executing PHIs. However, these mechanisms may compromise a system's confidentiality guarantees. In particular, we observe that multilevel side-effects of throttling mechanisms, due to PHI-related current management mechanisms, can be detected by two different software contexts (i.e., sender and receiver) running on 1) the same hardware thread, 2) co-located Simultaneous Multi-Threading (SMT) threads, and 3) different physical cores. Based on these new observations on current management mechanisms, we develop a new set of covert channels, IChannels, and demonstrate them in real modern Intel processors (which span more than 70% of the entire client and server processor market). Our analysis shows that IChannels provides more than 24x the channel capacity of state-of-the-art power management covert channels. We propose practical and effective mitigations to each covert channel in IChannels by leveraging the insights we gain through a rigorous characterization of real systems. △ Less

Submitted 10 June, 2021; v1 submitted 9 June, 2021; originally announced June 2021.

Comments: To appear in ISCA 2021

BurstLink: Techniques for Energy-Efficient Conventional and Virtual Reality Video Display

Authors: Jawad Haj-Yahya, Jisung Park, Rahul Bera, Juan Gómez Luna, Efraim Rotem, Taha Shahroodi, Jeremie Kim, Onur Mutlu

Abstract: Conventional planar video streaming is the most popular application in mobile systems and the rapid growth of 360 video content and virtual reality (VR) devices are accelerating the adoption of VR video streaming. Unfortunately, video streaming consumes significant system energy due to the high power consumption of the system components (e.g., DRAM, display interfaces, and display panel) involved… ▽ More Conventional planar video streaming is the most popular application in mobile systems and the rapid growth of 360 video content and virtual reality (VR) devices are accelerating the adoption of VR video streaming. Unfortunately, video streaming consumes significant system energy due to the high power consumption of the system components (e.g., DRAM, display interfaces, and display panel) involved in this process. We propose BurstLink, a novel system-level technique that improves the energy efficiency of planar and VR video streaming. BurstLink is based on two key ideas. First, BurstLink directly transfers a decoded video frame from the host system to the display panel, bypassing the host DRAM. To this end, we extend the display panel with a double remote frame buffer (DRFB), instead of the DRAM's double frame buffer, so that the system can directly update the DRFB with a new frame while updating the panel's pixels with the current frame stored in the DRFB. Second, BurstLink transfers a complete decoded frame to the display panel in a single burst, using the maximum bandwidth of modern display interfaces. Unlike conventional systems where the frame transfer rate is limited by the pixel-update throughput of the display panel, BurstLink can always take full advantage of the high bandwidth of modern display interfaces by decoupling the frame transfer from the pixel update as enabled by the DRFB. This direct and burst frame transfer of BurstLink significantly reduces energy consumption in video display by reducing access to the host DRAM and increasing the system's residency at idle power states. We evaluate BurstLink using an analytical power model that we rigorously validate on a real modern mobile system. Our evaluation shows that BurstLink reduces system energy consumption for 4K planar and VR video streaming by 41% and 33%, respectively. △ Less

Submitted 1 November, 2021; v1 submitted 11 April, 2021; originally announced April 2021.

Comments: The paper will be presented at MICRO 2021

FlexWatts: A Power- and Workload-Aware Hybrid Power Delivery Network for Energy-Efficient Microprocessors

Authors: Jawad Haj-Yahya, Mohammed Alser, Jeremie S. Kim, Lois Orosa, Efraim Rotem, Avi Mendelson, Anupam Chattopadhyay, Onur Mutlu

Abstract: Modern client processors typically use one of three commonly-used power delivery network (PDN): 1) motherboard voltage regulators (MBVR), 2) integrated voltage regulators (IVR), and 3) low dropout voltage regulators (LDO). We observe that the energy-efficiency of each of these PDNs varies with the processor power (e.g., thermal design power (TDP) and dynamic power-state) and workload characteristi… ▽ More Modern client processors typically use one of three commonly-used power delivery network (PDN): 1) motherboard voltage regulators (MBVR), 2) integrated voltage regulators (IVR), and 3) low dropout voltage regulators (LDO). We observe that the energy-efficiency of each of these PDNs varies with the processor power (e.g., thermal design power (TDP) and dynamic power-state) and workload characteristics. This leads to energy inefficiency and performance loss, as modern client processors operate across a wide spectrum of power consumption and execute a wide variety of workloads. We propose FlexWatts, a hybrid adaptive PDN for modern client processors whose goal is to provide high energy-efficiency across the processor's wide range of power consumption and workloads by dynamically allocating PDNs to processor domains. FlexWatts is based on three key ideas. First, it combines IVRs and LDOs in a novel way to share multiple on-chip and off-chip resources. This hybrid PDN is allocated for processor domains with a wide power consumption range and it dynamically switches between two modes: IVR-Mode and LDO-Mode, depending on the power consumption. Second, for all other processor domains, FlexWatts statically allocates off-chip VRs. Third, FlexWatts introduces a prediction algorithm that switches the hybrid PDN to the mode that is the most beneficial. To evaluate the tradeoffs of PDNs, we develop and open-source PDNspot, the first validated architectural PDN model that enables quantitative analysis of PDN metrics. Using PDNspot, we evaluate FlexWatts on a wide variety of SPEC CPU2006, 3DMark06, and battery life workloads against IVR, the state-of-the-art PDN in modern client processors. For a 4W TDP processor, FlexWatts improves the average performance of the SPEC CPU2006 and 3DMark06 workloads by 22% and 25%, respectively. FlexWatts has comparable cost and area overhead to IVR. △ Less

Submitted 18 September, 2020; originally announced September 2020.

Comments: To appear in the MICRO 2020 conference proceedings

SysScale: Exploiting Multi-domain Dynamic Voltage and Frequency Scaling for Energy Efficient Mobile Processors

Authors: Jawad Haj-Yahya, Mohammed Alser, Jeremie Kim, A. Giray Yaglıkçı, Nandita Vijaykumar, Efraim Rotem, Onur Mutlu

Abstract: There are three domains in a modern thermally-constrained mobile system-on-chip (SoC): compute, IO, and memory. We observe that a modern SoC typically allocates a fixed power budget, corresponding to worst-case performance demands, to the IO and memory domains even if they are underutilized. The resulting unfair allocation of the power budget across domains can cause two major issues: 1) the IO an… ▽ More There are three domains in a modern thermally-constrained mobile system-on-chip (SoC): compute, IO, and memory. We observe that a modern SoC typically allocates a fixed power budget, corresponding to worst-case performance demands, to the IO and memory domains even if they are underutilized. The resulting unfair allocation of the power budget across domains can cause two major issues: 1) the IO and memory domains can operate at a higher frequency and voltage than necessary, increasing power consumption and 2) the unused power budget of the IO and memory domains cannot be used to increase the throughput of the compute domain, hampering performance. To avoid these issues, it is crucial to dynamically orchestrate the distribution of the SoC power budget across the three domains based on their actual performance demands. We propose SysScale, a new multi-domain power management technique to improve the energy efficiency of mobile SoCs. SysScale is based on three key ideas. First, SysScale introduces an accurate algorithm to predict the performance (e.g., bandwidth and latency) demands of the three SoC domains. Second, SysScale uses a new DVFS (dynamic voltage and frequency scaling) mechanism to distribute the SoC power to each domain according to the predicted performance demands. Third, in addition to using a global DVFS mechanism, SysScale uses domain-specialized techniques to optimize the energy efficiency of each domain at different operating points. We implement SysScale on an Intel Skylake microprocessor for mobile devices and evaluate it using a wide variety of SPEC CPU2006, graphics (3DMark), and battery life workloads (e.g., video playback). On a 2-core Skylake, SysScale improves the performance of SPEC CPU2006 and 3DMark workloads by up to 16% and 8.9% (9.2% and 7.9% on average), respectively. △ Less

Submitted 18 May, 2020; v1 submitted 15 May, 2020; originally announced May 2020.

Comments: To appear at ISCA 2020