Showing 1–50 of 146 results for author: Haigh, J

First joint oscillation analysis of Super-Kamiokande atmospheric and T2K accelerator neutrino data

Authors: Super-Kamiokande, T2K collaborations, :, S. Abe, K. Abe, N. Akhlaq, R. Akutsu, H. Alarakia-Charles, A. Ali, Y. I. Alj Hakim, S. Alonso Monsalve, S. Amanai, C. Andreopoulos, L. H. V. Anthony, M. Antonova, S. Aoki, K. A. Apte, T. Arai, T. Arihara, S. Arimoto, Y. Asada, R. Asaka, Y. Ashida, E. T. Atkin, N. Babu , et al. (524 additional authors not shown)

Abstract: The Super-Kamiokande and T2K collaborations present a joint measurement of neutrino oscillation parameters from their atmospheric and beam neutrino data. It uses a common interaction model for events overlap** in neutrino energy and correlated detector systematic uncertainties between the two datasets, which are found to be compatible. Using 3244.4 days of atmospheric data and a beam exposure of… ▽ More The Super-Kamiokande and T2K collaborations present a joint measurement of neutrino oscillation parameters from their atmospheric and beam neutrino data. It uses a common interaction model for events overlap** in neutrino energy and correlated detector systematic uncertainties between the two datasets, which are found to be compatible. Using 3244.4 days of atmospheric data and a beam exposure of $19.7(16.3) \times 10^{20}$ protons on target in (anti)neutrino mode, the analysis finds a 1.9$σ$ exclusion of CP-conservation (defined as $J_{CP}=0$) and a preference for the normal mass ordering. △ Less

Submitted 21 May, 2024; originally announced May 2024.

Comments: 10 pages, 3 figures

In-Situ Single Particle Reconstruction Reveals 3D Evolution of PtNi Nanocatalysts During Heating

Authors: Yi-Chi Wang, Thomas J A Slater, Gerard M. Leteba, Candace I Lang, Zhong Lin Wang, Sarah J Haigh

Abstract: Tailoring nanoparticles composition and morphology is of particular interest for improving their performance for catalysis. A challenge of this approach is that the nanoparticles optimized initial structure often changes during use. Visualizing the three dimensional (3D) structural transformation in situ is therefore critical, but often prohibitively difficult experimentally. Although electron tom… ▽ More Tailoring nanoparticles composition and morphology is of particular interest for improving their performance for catalysis. A challenge of this approach is that the nanoparticles optimized initial structure often changes during use. Visualizing the three dimensional (3D) structural transformation in situ is therefore critical, but often prohibitively difficult experimentally. Although electron tomography provides opportunities for 3D imaging, restrictions in the tilt range of in situ holders together with electron dose considerations limit the possibilities for in situ electron tomography studies. Here, we present an in situ 3D imaging methodology using single particle reconstruction (SPR) that allows 3D reconstruction of nanoparticles with controlled electron dose and without tilting the microscope stage. This in situ SPR methodology was employed to investigate the restructuring and elemental redistribution within a population of PtNi nanoparticles at elevated temperatures. We further examined the atomic structure of PtNi and found a heat induced transition from a disordered to an ordered phase. Changes in structure and elemental distribution were linked to a loss of catalytic activity in the oxygen reduction reaction. The in situ SPR methodology employed here could be extended to a wide range of in situ studies employing not only heating, but gaseous, aqueous or electrochemical environments to reveal in operando nanoparticle evolution in 3D. △ Less

Submitted 16 October, 2023; originally announced October 2023.

Measurements of the $ν_μ$ and $\barν_μ$-induced Coherent Charged Pion Production Cross Sections on $^{12}C$ by the T2K experiment

Authors: K. Abe, N. Akhlaq, R. Akutsu, A. Ali, S. Alonso Monsalve, C. Alt, C. Andreopoulos, M. Antonova, S. Aoki, T. Arihara, Y. Asada, Y. Ashida, E. T. Atkin, M. Barbi, G. J. Barker, G. Barr, D. Barrow, M. Batkiewicz-Kwasniak, V. Berardi, L. Berns, S. Bhadra, A. Blanchet, A. Blondel, S. Bolognesi, T. Bonus , et al. (359 additional authors not shown)

Abstract: We report an updated measurement of the $ν_μ$-induced, and the first measurement of the $\barν_μ$-induced coherent charged pion production cross section on $^{12}C$ nuclei in the T2K experiment. This is measured in a restricted region of the final-state phase space for which $p_{μ,π} > 0.2$ GeV, $\cos(θ_μ) > 0.8$ and $\cos(θ_π) > 0.6$, and at a mean (anti)neutrino energy of 0.85 GeV using the T2K… ▽ More We report an updated measurement of the $ν_μ$-induced, and the first measurement of the $\barν_μ$-induced coherent charged pion production cross section on $^{12}C$ nuclei in the T2K experiment. This is measured in a restricted region of the final-state phase space for which $p_{μ,π} > 0.2$ GeV, $\cos(θ_μ) > 0.8$ and $\cos(θ_π) > 0.6$, and at a mean (anti)neutrino energy of 0.85 GeV using the T2K near detector. The measured $ν_μ$ CC coherent pion production flux-averaged cross section on $^{12}C$ is $(2.98 \pm 0.37 (stat.) \pm 0.31 (syst.) \substack{ +0.49 \\ -0.00 } \mathrm{ (Q^2\,model)}) \times 10^{-40}~\mathrm{cm}^{2}$. The new measurement of the $\barν_μ$-induced cross section on $^{12}{C}$ is $(3.05 \pm 0.71 (stat.) \pm 0.39 (syst.) \substack{ +0.74 \\ -0.00 } \mathrm{(Q^2\,model)}) \times 10^{-40}~\mathrm{cm}^{2}$. The results are compatible with both the NEUT 5.4.0 Berger-Sehgal (2009) and GENIE 2.8.0 Rein-Sehgal (2007) model predictions. △ Less

Submitted 14 October, 2023; v1 submitted 31 August, 2023; originally announced August 2023.

Journal ref: Phys.Rev.D 108 (2023) 9, 092009

Ultra-clean assembly of van der Waals heterostructures

Authors: Wendong Wang, Nicholas Clark, Matthew Hamer, Amy Carl, Endre Tovari, Sam Sullivan-Allsop, Evan Tillotson, Yunze Gao, Hugo de Latour, Francisco Selles, James Howarth, Eli G. Castanon, Mingwei Zhou, Haoyu Bai, Xiao Li, Astrid Weston, Kenji Watanabe, Takashi Taniguchi, Cecilia Mattevi, Thomas H. Bointon, Paul V. Wiper, Andrew J. Strudwick, Leonid A. Ponomarenko, Andrey Kretinin, Sarah J. Haigh , et al. (2 additional authors not shown)

Abstract: Layer-by-layer assembly of van der Waals (vdW) heterostructures underpins new discoveries in solid state physics, material science and chemistry. Despite the successes, all current 2D material (2DM) transfer techniques rely on the use of polymers which limit the cleanliness, ultimate electronic performance, and potential for optoelectronic applications of the heterostructures. In this article, we… ▽ More Layer-by-layer assembly of van der Waals (vdW) heterostructures underpins new discoveries in solid state physics, material science and chemistry. Despite the successes, all current 2D material (2DM) transfer techniques rely on the use of polymers which limit the cleanliness, ultimate electronic performance, and potential for optoelectronic applications of the heterostructures. In this article, we present a novel polymer-free platform for rapid and facile heterostructure assembly which utilises re-usable flexible silicon nitride membranes. We demonstrate that this allows fast and reproducible production of 2D heterostructures using both exfoliated and CVD-grown materials with perfect interfaces free from interlayer contamination and correspondingly excellent electronic behaviour, limited only by the size and intrinsic quality of the crystals used. Furthermore, removing the need for polymeric carriers allows new possibilities for vdW heterostructure fabrication: assembly at high temperatures up to 600°C, and in different environments including ultra-high vacuum (UHV) and when the materials are fully submerged in liquids. We demonstrate UHV heterostructure assembly for the first time, and show the reliable creation of graphene moiré superlattices with more than an order of magnitude improvement in their structural homogeneity. We believe that broad adaptation of our novel inorganic 2D materials assembly strategy will allow realisation of the full potential of vdW heterostructures as a platform for new physics and advanced optoelectronic technologies. △ Less

Submitted 25 August, 2023; originally announced August 2023.

Comments: 23 pages, 4 figures

Journal ref: Nature Electronics, 2023

Highly ${ }^{28} \mathrm{Si}$ Enriched Silicon by Localised Focused Ion Beam Implantation

Authors: Ravi Acharya, Maddison Coke, Mason Adshead, Kexue Li, Barat Achinuq, Rongsheng Cai, A. Baset Gholizadeh, Janet Jacobs, Jessica L. Boland, Sarah J. Haigh, Katie L. Moore, David N. Jamieson, Richard J. Curry

Abstract: Solid-state spin qubits within silicon crystals at mK temperatures show great promise in the realisation of a fully scalable quantum computation platform. Qubit coherence times are limited in natural silicon owing to coupling to the isotope ${ }^{29} \mathrm{Si}$ which has a non-zero nuclear spin. This work presents a method for the depletion of ${ }^{29} \mathrm{Si}$ in localised volumes of natur… ▽ More Solid-state spin qubits within silicon crystals at mK temperatures show great promise in the realisation of a fully scalable quantum computation platform. Qubit coherence times are limited in natural silicon owing to coupling to the isotope ${ }^{29} \mathrm{Si}$ which has a non-zero nuclear spin. This work presents a method for the depletion of ${ }^{29} \mathrm{Si}$ in localised volumes of natural silicon wafers by irradiation using a 45 keV ${ }^{28} \mathrm{Si}$ focused ion beam with fluences above $1 \times 10^{19} \, \mathrm{ions} \, \mathrm{cm}^{-2}$. Nanoscale secondary ion mass spectrometry analysis of the irradiated volumes shows unprecedented quality enriched silicon that reaches a minimal residual ${ }^{29} \mathrm{Si}$ value of 2.3 $\pm$ 0.7 ppm and with residual C and O comparable to the background concentration in the unimplanted wafer. Transmission electron microscopy lattice images confirm the solid phase epitaxial re-crystallization of the as-implanted amorphous enriched volume extending over 200 nm in depth upon annealing. The ease of fabrication, requiring only commercially available natural silicon wafers and ion sources, opens the possibility for co-integration of qubits in localised highly enriched volumes with control circuitry in the surrounding natural silicon for large-scale devices. △ Less

Submitted 23 August, 2023; originally announced August 2023.

Comments: 8 pages, 4 figures, 2 tables

Updated T2K measurements of muon neutrino and antineutrino disappearance using 3.6 $\times$ 10$^{21}$ protons on target

Authors: K. Abe, N. Akhlaq, R. Akutsu, H. Alarakia-Charles, A. Ali, Y. I. Alj Hakim, S. Alonso Monsalve, C. Alt, C. Andreopoulos, M. Antonova, S. Aoki, T. Arihara, Y. Asada, Y. Ashida, E. T. Atkin, M. Barbi, G. J. Barker, G. Barr, D. Barrow, M. Batkiewicz-Kwasniak, F. Bench, V. Berardi, L. Berns, S. Bhadra, A. Blanchet , et al. (385 additional authors not shown)

Abstract: Muon neutrino and antineutrino disappearance probabilities are identical in the standard three-flavor neutrino oscillation framework, but CPT violation and non-standard interactions can violate this symmetry. In this work we report the measurements of $\sin^{2} θ_{23}$ and $Δm_{32}^2$ independently for neutrinos and antineutrinos. The aforementioned symmetry violation would manifest as an inconsis… ▽ More Muon neutrino and antineutrino disappearance probabilities are identical in the standard three-flavor neutrino oscillation framework, but CPT violation and non-standard interactions can violate this symmetry. In this work we report the measurements of $\sin^{2} θ_{23}$ and $Δm_{32}^2$ independently for neutrinos and antineutrinos. The aforementioned symmetry violation would manifest as an inconsistency in the neutrino and antineutrino oscillation parameters. The analysis discussed here uses a total of 1.97$\times$10$^{21}$ and 1.63$\times$10$^{21}$ protons on target taken with a neutrino and antineutrino beam respectively, and benefits from improved flux and cross-section models, new near detector samples and more than double the data reducing the overall uncertainty of the result. No significant deviation is observed, consistent with the standard neutrino oscillation picture. △ Less

Submitted 16 October, 2023; v1 submitted 16 May, 2023; originally announced May 2023.

First measurement of muon neutrino charged-current interactions on hydrocarbon without pions in the final state using multiple detectors with correlated energy spectra at T2K

Authors: K. Abe, N. Akhlaq, R. Akutsu, H. Alarakia-Charles, A. Ali, Y. I. Alj Hakim, S. Alonso Monsalve, C. Alt, C. Andreopoulos, M. Antonova, S. Aoki, T. Arihara, Y. Asada, Y. Ashida, E. T. Atkin, M. Barbi, G. J. Barker, G. Barr, D. Barrow, M. Batkiewicz-Kwasniak, F. Bench, V. Berardi, L. Berns, S. Bhadra, A. Blanchet , et al. (380 additional authors not shown)

Abstract: This paper reports the first measurement of muon neutrino charged-current interactions without pions in the final state using multiple detectors with correlated energy spectra at T2K. The data was collected on hydrocarbon targets using the off-axis T2K near detector (ND280) and the on-axis T2K near detector (INGRID) with neutrino energy spectra peaked at 0.6 GeV and 1.1 GeV respectively. The corre… ▽ More This paper reports the first measurement of muon neutrino charged-current interactions without pions in the final state using multiple detectors with correlated energy spectra at T2K. The data was collected on hydrocarbon targets using the off-axis T2K near detector (ND280) and the on-axis T2K near detector (INGRID) with neutrino energy spectra peaked at 0.6 GeV and 1.1 GeV respectively. The correlated neutrino flux presents an opportunity to reduce the impact of the flux uncertainty and to study the energy dependence of neutrino interactions. The extracted double-differential cross sections are compared to several Monte Carlo neutrino-nucleus interaction event generators showing the agreement between both detectors individually and with the correlated result. △ Less

Submitted 18 October, 2023; v1 submitted 24 March, 2023; originally announced March 2023.

Comments: Updated discussion in Sec. V-A; Updated author list

Measurements of neutrino oscillation parameters from the T2K experiment using $3.6\times10^{21}$ protons on target

Authors: The T2K Collaboration, K. Abe, N. Akhlaq, R. Akutsu, A. Ali, S. Alonso Monsalve, C. Alt, C. Andreopoulos, M. Antonova, S. Aoki, T. Arihara, Y. Asada, Y. Ashida, E. T. Atkin, M. Barbi, G. J. Barker, G. Barr, D. Barrow, M. Batkiewicz-Kwasniak, F. Bench, V. Berardi, L. Berns, S. Bhadra, A. Blanchet, A. Blondel , et al. (376 additional authors not shown)

Abstract: The T2K experiment presents new measurements of neutrino oscillation parameters using $19.7(16.3)\times10^{20}$ protons on target (POT) in (anti-)neutrino mode at the far detector (FD). Compared to the previous analysis, an additional $4.7\times10^{20}$ POT neutrino data was collected at the FD. Significant improvements were made to the analysis methodology, with the near-detector analysis introdu… ▽ More The T2K experiment presents new measurements of neutrino oscillation parameters using $19.7(16.3)\times10^{20}$ protons on target (POT) in (anti-)neutrino mode at the far detector (FD). Compared to the previous analysis, an additional $4.7\times10^{20}$ POT neutrino data was collected at the FD. Significant improvements were made to the analysis methodology, with the near-detector analysis introducing new selections and using more than double the data. Additionally, this is the first T2K oscillation analysis to use NA61/SHINE data on a replica of the T2K target to tune the neutrino flux model, and the neutrino interaction model was improved to include new nuclear effects and calculations. Frequentist and Bayesian analyses are presented, including results on $\sin^2θ_{13}$ and the impact of priors on the $δ_\mathrm{CP}$ measurement. Both analyses prefer the normal mass ordering and upper octant of $\sin^2θ_{23}$ with a nearly maximally CP-violating phase. Assuming the normal ordering and using the constraint on $\sin^2θ_{13}$ from reactors, $\sin^2θ_{23}=0.561^{+0.021}_{-0.032}$ using Feldman--Cousins corrected intervals, and $Δm^2_{32}=2.494_{-0.058}^{+0.041}\times10^{-3}~\mathrm{eV^2}$ using constant $Δχ^{2}$ intervals. The CP-violating phase is constrained to $δ_\mathrm{CP}=-1.97_{-0.70}^{+0.97}$ using Feldman--Cousins corrected intervals, and $δ_\mathrm{CP}=0,π$ is excluded at more than 90% confidence level. A Jarlskog invariant of zero is excluded at more than $2σ$ credible level using a flat prior in $δ_\mathrm{CP}$, and just below $2σ$ using a flat prior in $\sinδ_\mathrm{CP}$. When the external constraint on $\sin^2θ_{13}$ is removed, $\sin^2θ_{13}=28.0^{+2.8}_{-6.5}\times10^{-3}$, in agreement with measurements from reactor experiments. These results are consistent with previous T2K analyses. △ Less

Submitted 10 September, 2023; v1 submitted 6 March, 2023; originally announced March 2023.

Journal ref: Eur. Phys. J. C 83, 782 (2023)

Telluride nanocrystals with adjustable amorphous shell thickness and core-shell structure modulation by aqueous cation-exchange

Authors: Xinyuan Li, Mengyao Su, Yi-Chi Wang, Meng Xu, Minman Tong, Sarah J. Haigh, Jiatao Zhang

Abstract: Engineering the structure of core-shell colloidal semiconductor nanoparticles (CSNPs) is attractive due to the potential to enhance photo-induced charge transfer (PICT) and induce favourable optical and electronic properties. Nonetheless, the sensitivity of telluride CSNPs to high temperatures makes it challenging to precisely modulate their surface crystallinity. Herein, we have developed an effi… ▽ More Engineering the structure of core-shell colloidal semiconductor nanoparticles (CSNPs) is attractive due to the potential to enhance photo-induced charge transfer (PICT) and induce favourable optical and electronic properties. Nonetheless, the sensitivity of telluride CSNPs to high temperatures makes it challenging to precisely modulate their surface crystallinity. Herein, we have developed an efficient strategy for synthesising telluride CSNPs with thin amorphous shells using aqueous cation exchange (ACE). By changing the synthesis temperature in the range 40 to 110C, the crystallinity of the CdTe nanoparticles was controllable from perfect crystals with no detectable amorphous shell (c-CdTe) to a core-shell structure with a crystalline CdTe NP core covered by an amorphous shell of tunable thickness up to 7-8nm (c@a-CdTe) . A second ACE step transformed the c@a-CdTe to crystalline CdTe@HgTe core-shell NPs. The c@a-CdTe nanoparticles synthesized at 60C and having a 4-5 nm thick amorphous shell, exhibited the highest surface-enhanced Raman scattering activity with a high enhancement factor around 8.82x10^5, attributed to the coupling between the amorphous shell and the crystalline core. △ Less

Submitted 9 December, 2022; originally announced December 2022.

Comments: 15 pages, 5 figures, plus supplementary information

Journal ref: Inorganic Chemistry 61 (2022) 3989

Scintillator ageing of the T2K near detectors from 2010 to 2021

Authors: The T2K Collaboration, K. Abe, N. Akhlaq, R. Akutsu, A. Ali, C. Alt, C. Andreopoulos, M. Antonova, S. Aoki, T. Arihara, Y. Asada, Y. Ashida, E. T. Atkin, S. Ban, M. Barbi, G. J. Barker, G. Barr, D. Barrow, M. Batkiewicz-Kwasniak, F. Bench, V. Berardi, L. Berns, S. Bhadra, A. Blanchet, A. Blondel , et al. (333 additional authors not shown)

Abstract: The T2K experiment widely uses plastic scintillator as a target for neutrino interactions and an active medium for the measurement of charged particles produced in neutrino interactions at its near detector complex. Over 10 years of operation the measured light yield recorded by the scintillator based subsystems has been observed to degrade by 0.9--2.2\% per year. Extrapolation of the degradation… ▽ More The T2K experiment widely uses plastic scintillator as a target for neutrino interactions and an active medium for the measurement of charged particles produced in neutrino interactions at its near detector complex. Over 10 years of operation the measured light yield recorded by the scintillator based subsystems has been observed to degrade by 0.9--2.2\% per year. Extrapolation of the degradation rate through to 2040 indicates the recorded light yield should remain above the lower threshold used by the current reconstruction algorithms for all subsystems. This will allow the near detectors to continue contributing to important physics measurements during the T2K-II and Hyper-Kamiokande eras. Additionally, work to disentangle the degradation of the plastic scintillator and wavelength shifting fibres shows that the reduction in light yield can be attributed to the ageing of the plastic scintillator. △ Less

Submitted 26 July, 2022; originally announced July 2022.

Comments: 29 pages, 18 figures. Prepared for submission to JINST

Symmetry effects on the static and dynamic properties of coupled magnetic oscillators

Authors: J P. Patchett, M. Drouhin, J. W. Liao, Z. Soban, D. Petit, J. Haigh, P. Roy, J. Wunderlich, R. P. Cowburn, C. Ciccarelli

Abstract: The effect of symmetry on the resonance spectra of antiferromagnetically coupled oscillators has attracted new interest with the discovery of symmetry-breaking induced anti-crossings. Here, we experimentally characterise the resonance spectrum of a synthetic antiferromagnet Pt/CoFeB/Ru/CoFeB/Pt, where we are able to independently tune the effective magnetisation of the two coupled magnets. To mode… ▽ More The effect of symmetry on the resonance spectra of antiferromagnetically coupled oscillators has attracted new interest with the discovery of symmetry-breaking induced anti-crossings. Here, we experimentally characterise the resonance spectrum of a synthetic antiferromagnet Pt/CoFeB/Ru/CoFeB/Pt, where we are able to independently tune the effective magnetisation of the two coupled magnets. To model our results we apply the mathematical methods of group theory to the solutions of the Landau Lifshitz Gilbert equation. This general approach, usually applied to quantum mechanical systems, allows us to identify the main features of the resonance spectrum in terms of symmetry breaking and to make a direct comparison with crystal antiferromagnets. △ Less

Submitted 17 March, 2022; originally announced April 2022.

Tracking single atoms in a liquid environment

Authors: Nicholas Clark, Daniel J. Kelly, Mingwei Zhou, Yi-Chao Zou, Chang Woo Myung, David G. Hopkinson, Christoph Schran, Angelos Michaelides, Roman Gorbachev, Sarah J. Haigh

Abstract: The chemical behaviour of single metal atoms largely depends on the local coordination environment, including interactions with the substrate and with the surrounding gas or liquid. However, the key instrumentation for studying such systems at the atomic scale generally requires high vacuum conditions, limiting the degree to which the aforementioned environmental parameters can be investigated. He… ▽ More The chemical behaviour of single metal atoms largely depends on the local coordination environment, including interactions with the substrate and with the surrounding gas or liquid. However, the key instrumentation for studying such systems at the atomic scale generally requires high vacuum conditions, limiting the degree to which the aforementioned environmental parameters can be investigated. Here we develop a new platform for transmission electron microscopy investigation of single metal atoms in liquids and study the dynamic behaviour of individual platinum atoms on the surface of a single layer MoS2 crystal in water. To achieve the record single atom resolution, we introduce a double liquid cell based on a 2D material heterostructure, which allows us to submerge an atomically thin membrane with liquid on both sides while maintaining the total specimen thickness of only ~ 70 nm. By comparison with an identical specimen imaged under high vacuum conditions, we reveal drastic differences in the single atom resting sites and atomic hop** behaviour, demonstrating that in situ imaging conditions are essential to gain complete understanding of the chemical activity of individual atoms. These findings pave the way for in situ liquid imaging of chemical processes with single atom precision. △ Less

Submitted 10 May, 2022; v1 submitted 9 March, 2022; originally announced March 2022.

Comments: Fixed Captions for figures 1 and 2 (did not appear in previous submission)

Constraints on the structure and seasonal variations of Triton's atmosphere from the 5 October 2017 stellar occultation and previous observations

Authors: J. Marques Oliveira, B. Sicardy, A. R. Gomes-Júnior, J. L. Ortiz, D. F. Strobel, T. Bertrand, F. Forget, E. Lellouch, J. Desmars, D. Bérard, A. Doressoundiram, J. Lecacheux, R. Leiva, E. Meza, F. Roques, D. Souami, T. Widemann, P. Santos-Sanz, N. Morales, R. Duffard, E. Fernández-Valenzuela, A. J. Castro-Tirado, F. Braga-Ribas, B. E. Morgado, M. Assafin , et al. (212 additional authors not shown)

Abstract: A stellar occultation by Neptune's main satellite, Triton, was observed on 5 October 2017 from Europe, North Africa, and the USA. We derived 90 light curves from this event, 42 of which yielded a central flash detection. We aimed at constraining Triton's atmospheric structure and the seasonal variations of its atmospheric pressure since the Voyager 2 epoch (1989). We also derived the shape of th… ▽ More A stellar occultation by Neptune's main satellite, Triton, was observed on 5 October 2017 from Europe, North Africa, and the USA. We derived 90 light curves from this event, 42 of which yielded a central flash detection. We aimed at constraining Triton's atmospheric structure and the seasonal variations of its atmospheric pressure since the Voyager 2 epoch (1989). We also derived the shape of the lower atmosphere from central flash analysis. We used Abel inversions and direct ray-tracing code to provide the density, pressure, and temperature profiles in the altitude range $\sim$8 km to $\sim$190 km, corresponding to pressure levels from 9 μbar down to a few nanobars. Results. (i) A pressure of 1.18$\pm$0.03 μbar is found at a reference radius of 1400 km (47 km altitude). (ii) A new analysis of the Voyager 2 radio science occultation shows that this is consistent with an extrapolation of pressure down to the surface pressure obtained in 1989. (iii) A survey of occultations obtained between 1989 and 2017 suggests that an enhancement in surface pressure as reported during the 1990s might be real, but debatable, due to very few high S/N light curves and data accessible for reanalysis. The volatile transport model analysed supports a moderate increase in surface pressure, with a maximum value around 2005-2015 no higher than 23 μbar. The pressures observed in 1995-1997 and 2017 appear mutually inconsistent with the volatile transport model presented here. (iv) The central flash structure does not show evidence of an atmospheric distortion. We find an upper limit of 0.0011 for the apparent oblateness of the atmosphere near the 8 km altitude. △ Less

Submitted 25 January, 2022; originally announced January 2022.

Comments: 52 pages, 26 figures in the main paper, 2 figures in appendix B, 9 figures in appendix C, 1 long table over 5 pages

Journal ref: A&A 659, A136 (2022)

Surfactant-Free Synthesis of Spiky Hollow Ag-Au Nanostars with Chemically Exposed Surfaces for Enhanced Catalysis and Single-Particle SERS

Authors: Ziwei Ye, Chunchun Li, Maurizio Celentano, Matthew Lindley, Tamsin O'Reilly, Adam J. Greer, Yiming Huang, Christopher Hardacre, Sarah J. Haigh, Yikai Xu, Steven E. J. Bell

Abstract: Spiky/hollow metal nanoparticles have applications across a broad range of fields. However, current bottom-up methods to produce spiky/hollow metal nanoparticles rely heavily on the use of strongly adsorbing surfactant molecules, which is undesirable since these passivate the product particle surfaces. Here we report a high-yield surfactant-free synthesis of spiky hollow Au-Ag nanostars (SHAANs).… ▽ More Spiky/hollow metal nanoparticles have applications across a broad range of fields. However, current bottom-up methods to produce spiky/hollow metal nanoparticles rely heavily on the use of strongly adsorbing surfactant molecules, which is undesirable since these passivate the product particle surfaces. Here we report a high-yield surfactant-free synthesis of spiky hollow Au-Ag nanostars (SHAANs). Each SHAAN is composed of more than 50 spikes attached to a hollow ca. 150 nm diameter cubic core, which makes SHAANs highly plasmonically and catalytically active. Moreover, the surfaces of SHAANs are chemically exposed which gives them significantly enhanced functionality compared to their surfactant-capped counterparts, as demonstrated in surface-enhanced Raman spectroscopy (SERS) and catalysis. The chemical accessibility of the pristine SHAANs also allows the use of hydroxyethyl cellulose as a weakly-bound stabilizing agent. This produces colloidal SHAANs which remain stable for more than 1 month while retaining the functionalities of the pristine particles and allow even single-particle SERS to be realized. △ Less

Submitted 2 December, 2021; originally announced December 2021.

Comments: 10 pages, 6 figures, supplementary information

Doped graphene/carbon black hybrid catalyst giving enhanced oxygen reduction reaction activity with high resistance to corrosion in proton exchange membrane fuel cells

Authors: Zhaoqi Ji, Jianuo Chen, María Pérez-Page, Zunmin Guo, Ziyu Zhao, Rongsheng Cai, Maxwell T. P. Rigby, Sarah J. Haigh, Stuart M. Homes

Abstract: Nitrogen do** of the carbon is an important method to improve the performance and durability of catalysts for proton exchange membrane fuel cells by platinum-nitrogen and carbon-nitrogen bonds. This study shows that p-phenyl groups and graphitic N acting bridges linking platinum and the graphene/carbon black (the ratio graphene/carbon black=2/3) hybrid support materials achieved the average size… ▽ More Nitrogen do** of the carbon is an important method to improve the performance and durability of catalysts for proton exchange membrane fuel cells by platinum-nitrogen and carbon-nitrogen bonds. This study shows that p-phenyl groups and graphitic N acting bridges linking platinum and the graphene/carbon black (the ratio graphene/carbon black=2/3) hybrid support materials achieved the average size of platinum nanoparticles with (4.88 +/- 1.79) nm. It improved the performance of the lower-temperature hydrogen fuel cell up to 0.934 W cm-2 at 0.60 V, which is 1.55 times greater than that of commercial Pt/C. Do** also enhanced the interaction between Pt and the support materials, and the resistance to corrosion, thus improving the durability of the low-temperature hydrogen fuel cell with a much lower decay of 10 mV at 0.80 A cm-2 after 30k cycles of an in-situ accelerated stress test of catalyst degradation than that of 92 mV in Pt/C, which achieves the target of Department of Energy (<30 mV). Meanwhile, Pt/NrEGO2-CB3 remains 78% of initial power density at 1.5 A cm-2 after 5k cycles of in-situ accelerated stress test of carbon corrosion, which is more stable than the power density of commercial Pt/C, kee** only 54% after accelerated stress test. △ Less

Submitted 29 November, 2021; originally announced November 2021.

Comments: 22 pages, 8 figures and supplementary information

Oleylamine aging of PtNi nanoparticles giving enhanced functionality for the oxygen reduction reaction

Authors: Gerard M Leteba, Yi-Chi Wang, Thomas J A Slater, Rongsheng Cai, Conor Byrne, Christopher P Race, David R G Mitchell, Pieter B J Levecque, Neil P Young, Alex Walton, Angus I Kirkland, Sarah J Haigh, Candace I Lang

Abstract: We report a rapid solution-phase strategy to synthesize alloyed PtNi nanoparticles which demonstrate outstanding functionality for the oxygen reduction reaction (ORR). This one-pot co-reduction colloidal synthesis results in a monodisperse population of single-crystal nanoparticles of rhombic dodecahedral morphology, with Pt enriched edges and compositions close to Pt1Ni2. We use nanoscale 3D comp… ▽ More We report a rapid solution-phase strategy to synthesize alloyed PtNi nanoparticles which demonstrate outstanding functionality for the oxygen reduction reaction (ORR). This one-pot co-reduction colloidal synthesis results in a monodisperse population of single-crystal nanoparticles of rhombic dodecahedral morphology, with Pt enriched edges and compositions close to Pt1Ni2. We use nanoscale 3D compositional analysis to reveal for the first time that oleylamine (OAm)-aging of the rhombic dodecahedral Pt1Ni2 particles results in Ni leaching from surface facets, producing aged particles with concave faceting, an exceptionally high surface area and a composition of Pt2Ni1. We show that the modified atomic nanostructures catalytically outperform the original PtNi rhombic dodecahedral particles by more than 2-fold and also yield improved cycling durability. Their functionality for the ORR far exceeds commercially available Pt/C nanoparticle electrocatalysts, both in terms of mass-specific activities (up to a 25-fold increase) and intrinsic area-specific activities (up to a 27-fold increase). △ Less

Submitted 26 November, 2021; originally announced November 2021.

Comments: 14 pages, 4 figures, supplementary information

Journal ref: NanoLetters 21 (2021) 3989

Interfacial ferroelectricity in marginally twisted 2D semiconductors

Authors: Astrid Weston, Eli G Castanon, Vladimir Enaldiev, Fabio Ferreira, Shubhadeep Bhattacharjee, Shuigang Xu, Hector Corte-Leon, Zefei Wu, Nickolas Clark, Alex Summerfield, Teruo Hashimoto, Yunze Gao, Wendong Wang, Matthew Hamer, Harriet Read, Laura Fumagalli, Andrey V Kretinin, Sarah J. Haigh, Olga Kazakova, A. K. Geim, Vladimir I. Fal'ko, Roman Gorbachev

Abstract: Twisted heterostructures of two-dimensional crystals offer almost unlimited scope for the design of novel metamaterials. Here we demonstrate a room-temperature ferroelectric semiconductor that is assembled using mono- or few- layer MoS2. These van der Waals heterostructures feature broken inversion symmetry, which, together with the asymmetry of atomic arrangement at the interface of two 2D crysta… ▽ More Twisted heterostructures of two-dimensional crystals offer almost unlimited scope for the design of novel metamaterials. Here we demonstrate a room-temperature ferroelectric semiconductor that is assembled using mono- or few- layer MoS2. These van der Waals heterostructures feature broken inversion symmetry, which, together with the asymmetry of atomic arrangement at the interface of two 2D crystals, enables ferroelectric domains with alternating out-of-plane polarisation arranged into a twist-controlled network. The latter can be moved by applying out-of-plane electrical fields, as visualized in situ using channelling contrast electron microscopy. The interfacial charge transfer for the observed ferroelectric domains is quantified using Kelvin probe force microscopy and agrees well with theoretical calculations. The movement of domain walls and their bending rigidity also agrees well with our modelling results. Furthermore, we demonstrate proof-of-principle field-effect transistors, where the channel resistance exhibits a pronounced hysteresis governed by pinning of ferroelectric domain walls. Our results show a potential venue towards room temperature electronic and optoelectronic semiconductor devices with built-in ferroelectric memory functions. △ Less

Submitted 14 August, 2021; originally announced August 2021.

Comments: 15 pages, 3 figures

Ion exchange in atomically thin clays and micas

Authors: Yi-Chao Zou, Lucas Mogg, Nick Clark, Cihan Bacaksiz, Slavisa Milanovic, Vishnu Sreepal, Guang-** Hao, Yi-Chi Wang, David G. Hopkinson, Roman Gorbachev, Samuel Shaw, Kostya S. Novoselov, Rahul Raveendran-Nair, Francois M. Peeters, Marcelo Lozada-Hidalgo, Sarah J. Haigh

Abstract: Clays and micas are receiving attention as materials that, in their atomically thin form, could allow for novel proton conductive, ion selective, osmotic power generation, or solvent filtration membranes. The interest arises from the possibility of controlling their properties by exchanging ions in the crystal lattice. However, the ion exchange process itself remains largely unexplored in atomical… ▽ More Clays and micas are receiving attention as materials that, in their atomically thin form, could allow for novel proton conductive, ion selective, osmotic power generation, or solvent filtration membranes. The interest arises from the possibility of controlling their properties by exchanging ions in the crystal lattice. However, the ion exchange process itself remains largely unexplored in atomically thin materials. Here we use atomic-resolution scanning transmission electron microscopy to study the dynamics of the process and reveal the binding sites of individual ions in atomically thin and artificially restacked clays and micas. Imaging ion exchange after different exposure time and for different crystal thicknesses, we find that the ion diffusion constant, D, for the interlayer space of atomically thin samples is up to 10^4 times larger than in bulk crystals and approaches its value in free water. Surprisingly, samples where no bulk exchange is expected display fast exchange if the mica layers are twisted and restacked; but in this case, the exchanged ions arrange in islands controlled by the moiré superlattice dimensions. We attribute the fast ion diffusion to enhanced interlayer expandability resulting from weaker interlayer binding forces in both atomically thin and restacked materials. Finally, we demonstrate images of individual surface cations for these materials, which had remained elusive in previous studies. This work provides atomic scale insights into ion diffusion in highly confined spaces and suggests strategies to design novel exfoliated clays membranes. △ Less

Submitted 14 July, 2021; originally announced July 2021.

Comments: 11 pages, 4 figures, plus 35 pages supplementary information

Polarization dependent scattering in cavity optomagnonics

Authors: J. A. Haigh, A. Nunnenkamp, A. J. Ramsay

Abstract: The polarization dependence of magnon-photon scattering in an optical microcavity is reported. Due to the short cavity length, the mode-matching conditions found in previously explored, large path-length whispering gallery resonators are absent. Nonetheless, for cross-polarized scattering a strong and broadband suppression of one side-band is observed. This arises due to an interference between th… ▽ More The polarization dependence of magnon-photon scattering in an optical microcavity is reported. Due to the short cavity length, the mode-matching conditions found in previously explored, large path-length whispering gallery resonators are absent. Nonetheless, for cross-polarized scattering a strong and broadband suppression of one side-band is observed. This arises due to an interference between the Faraday and second-order Cotton-Mouton effects. To fully account for the suppression of the cross-polarized scattering, it is necessary to consider the squeezing of magnon modes intrinsic to thin-film geometry. A co-polarized scattering due to Cotton-Mouton effect is also observed. In addition, the magnon modes involved are identified as Damon-Eshbach surface modes, whose non-reciprocal propagation could be exploited in devices applications. This work experimentally demonstrates the important role of second order Cotton-Mouton effect for optomagnonic devices. △ Less

Submitted 7 July, 2021; originally announced July 2021.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. Lett. 127, 143601 (2021)

Cavity Magnonics

Authors: Babak Zare Rameshti, Silvia Viola Kusminskiy, James A. Haigh, Koji Usami, Dany Lachance-Quirion, Yasunobu Nakamura, Can-Ming Hu, Hong X. Tang, Gerrit E. W. Bauer, Yaroslav M. Blanter

Abstract: Cavity magnonics deals with the interaction of magnons - elementary excitations in magnetic materials - and confined electromagnetic fields. We introduce the basic physics and review the experimental and theoretical progress of this young field that is gearing up for integration in future quantum technologies. Much of its appeal is derived from the strong magnon-photon coupling and the easily-reac… ▽ More Cavity magnonics deals with the interaction of magnons - elementary excitations in magnetic materials - and confined electromagnetic fields. We introduce the basic physics and review the experimental and theoretical progress of this young field that is gearing up for integration in future quantum technologies. Much of its appeal is derived from the strong magnon-photon coupling and the easily-reached nonlinear regime in microwave cavities. The interaction of magnons with light as detected by Brillouin light scattering is enhanced in magnetic optical resonators, which can be employed to manipulate magnon distributions. The cavity photon-mediated coupling of a magnon mode to a superconducting qubit enables measurements in the single magnon limit. △ Less

Submitted 17 June, 2021; originally announced June 2021.

Comments: review article, 54 pages

Iron-silica interaction during reduction of precipitated silica-promoted iron oxides using in situ XRD and TEM

Authors: M. J. Coombes, E. J. Olivier, E. Prestat, S. J. Haigh, E. du Plessis, J. H. Neethling

Abstract: The effect of silica-promotion on the reduction of iron oxides in hydrogen was investigated using in situ X-ray diffraction and aberration-corrected transmission electron microscopy to understand the mechanism of reduction and the identity of the iron(II) silicate phase that has historically been designated as the cause of the iron-silica interaction in such materials. In the absence of a silica p… ▽ More The effect of silica-promotion on the reduction of iron oxides in hydrogen was investigated using in situ X-ray diffraction and aberration-corrected transmission electron microscopy to understand the mechanism of reduction and the identity of the iron(II) silicate phase that has historically been designated as the cause of the iron-silica interaction in such materials. In the absence of a silica promoter the reduction of hematite to α-Fe proceeds via magnetite. Silica promoted amorphous iron oxide is reduced to α-Fe via stable magnetite and wüstite phases. During reduction of silica-promoted iron oxide, Fe0 diffuses out of the amorphous silica-promoted iron oxide matrix upon reduction from Fe2+ and coexists with an amorphous Fe-O-Si matrix. Certain portions of wüstite remain difficult to reduce to α-Fe owing to the formation of a protective silica-containing layer covering the remaining iron oxide regions. Given sufficient energy, this amorphous Fe-O-Si material forms ordered, crystalline fayalite. △ Less

Submitted 12 May, 2021; originally announced May 2021.

Comments: 8 figures

Journal ref: Applied Catalysis A: General 613 (2021) 118031

Experiment Simulation Configurations Approximating DUNE TDR

Authors: DUNE Collaboration, B. Abi, R. Acciarri, M. A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, M. Antonova, S. Antusch, A. Aranda-Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (949 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment (DUNE) is a next-generation long-baseline neutrino oscillation experiment consisting of a high-power, broadband neutrino beam, a highly capable near detector located on site at Fermilab, in Batavia, Illinois, and a massive liquid argon time projection chamber (LArTPC) far detector located at the 4850L of Sanford Underground Research Facility in Lead, South… ▽ More The Deep Underground Neutrino Experiment (DUNE) is a next-generation long-baseline neutrino oscillation experiment consisting of a high-power, broadband neutrino beam, a highly capable near detector located on site at Fermilab, in Batavia, Illinois, and a massive liquid argon time projection chamber (LArTPC) far detector located at the 4850L of Sanford Underground Research Facility in Lead, South Dakota. The long-baseline physics sensitivity calculations presented in the DUNE Physics TDR, and in a related physics paper, rely upon simulation of the neutrino beam line, simulation of neutrino interactions in the near and far detectors, fully automated event reconstruction and neutrino classification, and detailed implementation of systematic uncertainties. The purpose of this posting is to provide a simplified summary of the simulations that went into this analysis to the community, in order to facilitate phenomenological studies of long-baseline oscillation at DUNE. Simulated neutrino flux files and a GLoBES configuration describing the far detector reconstruction and selection performance are included as ancillary files to this posting. A simple analysis using these configurations in GLoBES produces sensitivity that is similar, but not identical, to the official DUNE sensitivity. DUNE welcomes those interested in performing phenomenological work as members of the collaboration, but also recognizes the benefit of making these configurations readily available to the wider community. △ Less

Submitted 18 March, 2021; v1 submitted 8 March, 2021; originally announced March 2021.

Comments: 15 pages, 6 figures, configurations in ancillary files, v2 corrects a typo

Report number: FERMILAB-FN-1125-ND

A High Pressure Time Projection Chamber with Optical Readout

Authors: Alexander Deisting, Abigail Victoria Waldron, Edward Atkin, Gary Barker, Anastasia Basharina-Freshville, Christopher Betancourt, Steven Boyd, Dominic Brailsford, Zachary Chen-Wishart, Linda Cremonesi, Adriana Dias, Patrick Dunne, Jennifer Haigh, Philip Hamacher-Baumann, Sebastian Jones, Asher Kaboth, Alexander Korzenev, William Ma, Philippe Mermod, Maria Mironova, Jocelyn Monroe, Ryan Nichol, Toby Nonnenmacher, Jaroslaw Nowak, William Parker , et al. (11 additional authors not shown)

Abstract: Measurements of proton-nucleus scattering and high resolution neutrino-nucleus interaction imaging are key to reduce neutrino oscillation systematic uncertainties in future experiments. A High Pressure Time Projection Chamber (HPTPC) prototype has been constructed and operated at Royal Holloway University of London and CERN as a first step in the development of a HPTPC capable of performing these… ▽ More Measurements of proton-nucleus scattering and high resolution neutrino-nucleus interaction imaging are key to reduce neutrino oscillation systematic uncertainties in future experiments. A High Pressure Time Projection Chamber (HPTPC) prototype has been constructed and operated at Royal Holloway University of London and CERN as a first step in the development of a HPTPC capable of performing these measurements as part of a future long-baseline neutrino oscillation experiment such as the Deep Underground Neutrino Experiment. In this paper we describe the design and operation of the prototype HPTPC with an argon based gas mixture. We report on the successful hybrid charge and optical readout, using four CCD cameras, of signals from Am-241 sources. △ Less

Submitted 2 June, 2021; v1 submitted 12 February, 2021; originally announced February 2021.

Comments: 40 pages, 24 figures

In-Orbit Aerodynamic Coefficient Measurements using SOAR (Satellite for Orbital Aerodynamics Research)

Authors: N. H. Crisp, P. C. E. Roberts, S. Livadiotti, A. Macario Rojas, V. T. A. Oiko, S. Edmondson, S. J. Haigh, B. E. A. Holmes, L. A. Sinpetru, K. L. Smith, J. Becedas, R. M. Dominguez, V. Sulliotti-Linner, S. Christensen, J. Nielsen, M. Bisgaard, Y-A. Chan, S. Fasoulas, G. H. Herdrich, F. Romano, C. Traub, D. Garcia-Alminana, S. Rodriguez-Donaire, M. Sureda, D. Kataria , et al. (4 additional authors not shown)

Abstract: The Satellite for Orbital Aerodynamics Research (SOAR) is a CubeSat mission, due to be launched in 2021, to investigate the interaction between different materials and the atmospheric flow regime in very low Earth orbits (VLEO). Improving knowledge of the gas-surface interactions at these altitudes and identification of novel materials that can minimise drag or improve aerodynamic control are impo… ▽ More The Satellite for Orbital Aerodynamics Research (SOAR) is a CubeSat mission, due to be launched in 2021, to investigate the interaction between different materials and the atmospheric flow regime in very low Earth orbits (VLEO). Improving knowledge of the gas-surface interactions at these altitudes and identification of novel materials that can minimise drag or improve aerodynamic control are important for the design of future spacecraft that can operate in lower altitude orbits. Such satellites may be smaller and cheaper to develop or can provide improved Earth observation data or communications link-budgets and latency. Using precise orbit and attitude determination information and the measured atmospheric flow characteristics the forces and torques experienced by the satellite in orbit can be studied and estimates of the aerodynamic coefficients calculated. This paper presents the scientific concept and design of the SOAR mission. The methodology for recovery of the aerodynamic coefficients from the measured orbit, attitude, and in-situ atmospheric data using a least-squares orbit determination and free-parameter fitting process is described and the experimental uncertainty of the resolved aerodynamic coefficients is estimated. The presented results indicate that the combination of the satellite design and experimental methodology are capable of clearly illustrating the variation of drag and lift coefficient for differing surface incidence angle. The lowest uncertainties for the drag coefficient measurement are found at approximately 300 km, whilst the measurement of lift coefficient improves for reducing orbital altitude to 200 km. △ Less

Submitted 17 December, 2020; v1 submitted 14 December, 2020; originally announced December 2020.

Comments: 19 pages, 11 figures. Accepted for publication in Acta Astronautica (2020-12-14)

Journal ref: Acta Astronautica, vol. 180 (2021)

A Review of Gas-Surface Interaction Models for Orbital Aerodynamics Applications

Authors: Sabrina Livadiotti, Nicholas H. Crisp, Peter C. E. Roberts, Stephen D. Worrall, Vitor T. A. Oiko, Steve Edmondson, Sarah J. Haigh, Claire Huyton, Katharine L. Smith, Luciana A. Sinpetru, Brandon E. A. Holmes, Jonathan Becedas, Rosa María Domínguez, Valentín Cañas, Simon Christensen, Anders Mølgaard, Jens Nielsen, Morten Bisgaard, Yung-An Chan, Georg H. Herdrich, Francesco Romano, Stefanos Fasoulas, Constantin Traub, Daniel Garcia-Almiñana, Silvia Rodriguez-Donaire , et al. (7 additional authors not shown)

Abstract: Renewed interest in Very Low Earth Orbits (VLEO) - i.e. altitudes below 450 km - has led to an increased demand for accurate environment characterisation and aerodynamic force prediction. While the former requires knowledge of the mechanisms that drive density variations in the thermosphere, the latter also depends on the interactions between the gas-particles in the residual atmosphere and the su… ▽ More Renewed interest in Very Low Earth Orbits (VLEO) - i.e. altitudes below 450 km - has led to an increased demand for accurate environment characterisation and aerodynamic force prediction. While the former requires knowledge of the mechanisms that drive density variations in the thermosphere, the latter also depends on the interactions between the gas-particles in the residual atmosphere and the surfaces exposed to the flow. The determination of the aerodynamic coefficients is hindered by the numerous uncertainties that characterise the physical processes occurring at the exposed surfaces. Several models have been produced over the last 60 years with the intent of combining accuracy with relatively simple implementations. In this paper the most popular models have been selected and reviewed using as discriminating factors relevance with regards to orbital aerodynamics applications and theoretical agreement with gas-beam experimental data. More sophisticated models were neglected, since their increased accuracy is generally accompanied by a substantial increase in computation times which is likely to be unsuitable for most space engineering applications. For the sake of clarity, a distinction was introduced between physical and scattering kernel theory based gas-surface interaction models. The physical model category comprises the Hard Cube model, the Soft Cube model and the Washboard model, while the scattering kernel family consists of the Maxwell model, the Nocilla-Hurlbut-Sherman model and the Cercignani-Lampis-Lord model. Limits and assets of each model have been discussed with regards to the context of this paper. Wherever possible, comments have been provided to help the reader to identify possible future challenges for gas-surface interaction science with regards to orbital aerodynamic applications. △ Less

Submitted 22 November, 2020; v1 submitted 1 October, 2020; originally announced October 2020.

Comments: Journal paper (accepted for publication in "Progress in Aerospace Sciences") Replacement: Corrected typos in Equations

Journal ref: Progress in Aerospace Sciences, vol. 119 (2020)

Capillary condensation under atomic-scale confinement

Authors: Qian Yang, P. Z. Sun, L. Fumagalli, Y. V. Stebunov, S. J. Haigh, Z. W. Zhou, I. V. Grigorieva, F. C. Wang, A. K. Geim

Abstract: Capillary condensation of water is ubiquitous in nature and technology. It routinely occurs in granular and porous media, can strongly alter such properties as adhesion, lubrication, friction and corrosion, and is important in many processes employed by microelectronics, pharmaceutical, food and other industries. The century-old Kelvin equation is commonly used to describe condensation phenomena a… ▽ More Capillary condensation of water is ubiquitous in nature and technology. It routinely occurs in granular and porous media, can strongly alter such properties as adhesion, lubrication, friction and corrosion, and is important in many processes employed by microelectronics, pharmaceutical, food and other industries. The century-old Kelvin equation is commonly used to describe condensation phenomena and shown to hold well for liquid menisci with diameters as small as several nm. For even smaller capillaries that are involved in condensation under ambient humidity and, hence, of particular practical interest, the Kelvin equation is expected to break down, because the required confinement becomes comparable to the size of water molecules. Here we take advantage of van der Waals assembly of two-dimensional crystals to create atomic-scale capillaries and study condensation inside. Our smallest capillaries are less than 4 angstroms in height and can accommodate just a monolayer of water. Surprisingly, even at this scale, the macroscopic Kelvin equation using the characteristics of bulk water is found to describe accurately the condensation transition in strongly hydrophilic (mica) capillaries and remains qualitatively valid for weakly hydrophilic (graphene) ones. We show that this agreement is somewhat fortuitous and can be attributed to elastic deformation of capillary walls, which suppresses giant oscillatory behavior expected due to commensurability between atomic-scale confinement and water molecules. Our work provides a much-needed basis for understanding of capillary effects at the smallest possible scale important in many realistic situations. △ Less

Submitted 23 September, 2020; originally announced September 2020.

Journal ref: Nature 588, 250 - 253 (2020)

Sub-pico-liter magneto-optical cavities

Authors: J. A. Haigh, R. A. Chakalov, A. J. Ramsay

Abstract: Microwave-to-optical conversion via ferromagnetic magnons has so-far been limited by the optical coupling rates achieved in mm-scale whispering gallery mode resonators. Towards overcoming this limitation, we propose and demonstrate an open magneto-optical cavity containing a thin-film of yttrium iron garnet (YIG). We achieve a 0.1 pL (100 $μ$m$^{3}$) optical mode volume, $\sim$50 times smaller tha… ▽ More Microwave-to-optical conversion via ferromagnetic magnons has so-far been limited by the optical coupling rates achieved in mm-scale whispering gallery mode resonators. Towards overcoming this limitation, we propose and demonstrate an open magneto-optical cavity containing a thin-film of yttrium iron garnet (YIG). We achieve a 0.1 pL (100 $μ$m$^{3}$) optical mode volume, $\sim$50 times smaller than previous devices. From this, we estimate the magnon single-photon coupling rate is $G\approx50$ Hz. This open cavity design offers the prospect of wavelength scale mode volumes, small polarization splittings, and good magneto-optical mode overlap. With achievable further improvements and optimization, efficient microwave-optical conversion and magnon cooling devices become a realistic possibility. △ Less

Submitted 9 September, 2020; originally announced September 2020.

Comments: 7 pages, 4 figures

Prospects for Beyond the Standard Model Physics Searches at the Deep Underground Neutrino Experiment

Authors: DUNE Collaboration, B. Abi, R. Acciarri, M. A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, M. Antonova, S. Antusch, A. Aranda-Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (953 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment (DUNE) will be a powerful tool for a variety of physics topics. The high-intensity proton beams provide a large neutrino flux, sampled by a near detector system consisting of a combination of capable precision detectors, and by the massive far detector system located deep underground. This configuration sets up DUNE as a machine for discovery, as it enables… ▽ More The Deep Underground Neutrino Experiment (DUNE) will be a powerful tool for a variety of physics topics. The high-intensity proton beams provide a large neutrino flux, sampled by a near detector system consisting of a combination of capable precision detectors, and by the massive far detector system located deep underground. This configuration sets up DUNE as a machine for discovery, as it enables opportunities not only to perform precision neutrino measurements that may uncover deviations from the present three-flavor mixing paradigm, but also to discover new particles and unveil new interactions and symmetries beyond those predicted in the Standard Model (SM). Of the many potential beyond the Standard Model (BSM) topics DUNE will probe, this paper presents a selection of studies quantifying DUNE's sensitivities to sterile neutrino mixing, heavy neutral leptons, non-standard interactions, CPT symmetry violation, Lorentz invariance violation, neutrino trident production, dark matter from both beam induced and cosmogenic sources, baryon number violation, and other new physics topics that complement those at high-energy colliders and significantly extend the present reach. △ Less

Submitted 23 April, 2021; v1 submitted 28 August, 2020; originally announced August 2020.

Comments: 54 pages, 40 figures, paper based on the DUNE Technical Design Report (arXiv:2002.03005)

Report number: FERMILAB-PUB-20-459-LBNF-ND

Journal ref: European Physical Journal C 81 (2021) 322

Supernova Neutrino Burst Detection with the Deep Underground Neutrino Experiment

Authors: DUNE collaboration, B. Abi, R. Acciarri, M. A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, M. Antonova, S. Antusch, A. Aranda-Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (949 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment (DUNE), a 40-kton underground liquid argon time projection chamber experiment, will be sensitive to the electron-neutrino flavor component of the burst of neutrinos expected from the next Galactic core-collapse supernova. Such an observation will bring unique insight into the astrophysics of core collapse as well as into the properties of neutrinos. The gen… ▽ More The Deep Underground Neutrino Experiment (DUNE), a 40-kton underground liquid argon time projection chamber experiment, will be sensitive to the electron-neutrino flavor component of the burst of neutrinos expected from the next Galactic core-collapse supernova. Such an observation will bring unique insight into the astrophysics of core collapse as well as into the properties of neutrinos. The general capabilities of DUNE for neutrino detection in the relevant few- to few-tens-of-MeV neutrino energy range will be described. As an example, DUNE's ability to constrain the $ν_e$ spectral parameters of the neutrino burst will be considered. △ Less

Submitted 29 May, 2021; v1 submitted 15 August, 2020; originally announced August 2020.

Comments: 29 pages, 17 figures; paper based on DUNE Technical Design Report. arXiv admin note: substantial text overlap with arXiv:2002.03005

Report number: FERMILAB-PUB-20-380-LBNF

Atomic Resolution Imaging of CrBr$_{3}$ using Adhesion-Enhanced Grids

Authors: Matthew J. Hamer, David G. Hopkinson, Nick Clark, Mingwei Zhou, Wendong Wang, Yichao Zou, Daniel J. Kelly, Thomas H. Bointon, Sarah J. Haigh, Roman V. Gorbachev

Abstract: Suspended specimens of 2D crystals and their heterostructures are required for a range of studies including transmission electron microscopy (TEM), optical transmission experiments and nanomechanical testing. However, investigating the properties of laterally small 2D crystal specimens, including twisted bilayers and air sensitive materials, has been held back by the difficulty of fabricating the… ▽ More Suspended specimens of 2D crystals and their heterostructures are required for a range of studies including transmission electron microscopy (TEM), optical transmission experiments and nanomechanical testing. However, investigating the properties of laterally small 2D crystal specimens, including twisted bilayers and air sensitive materials, has been held back by the difficulty of fabricating the necessary clean suspended samples. Here we present a scalable solution which allows clean free-standing specimens to be realized with 100% yield by dry-stam** atomically thin 2D stacks onto a specially developed adhesion-enhanced support grid. Using this new capability, we demonstrate atomic resolution imaging of defect structures in atomically thin CrBr3, a novel magnetic material which degrades in ambient conditions. △ Less

Submitted 11 August, 2020; originally announced August 2020.

Comments: 17 pages (+ references), 3 Figures, 1 Table

Holographic reconstruction of the interlayer distance of bilayer two-dimensional crystal samples from their convergent beam electron diffraction patterns

Authors: Tatiana Latychevskaia, Yichao Zou, Colin Robert Woods, Yi Bo Wang, Matthew Holwill, Eric Prestat, Sarah J. Haigh, Kostya S. Novoselov

Abstract: The convergent beam electron diffraction (CBED) patterns of twisted bilayer samples exhibit interference patterns in their CBED spots. Such interference patterns can be treated as off-axis holograms and the phase of the scattered waves, meaning the interlayer distance can be reconstructed. A detailed protocol of the reconstruction procedure is provided in this study. In addition, we derive an exac… ▽ More The convergent beam electron diffraction (CBED) patterns of twisted bilayer samples exhibit interference patterns in their CBED spots. Such interference patterns can be treated as off-axis holograms and the phase of the scattered waves, meaning the interlayer distance can be reconstructed. A detailed protocol of the reconstruction procedure is provided in this study. In addition, we derive an exact formula for reconstructing the interlayer distance from the recovered phase distribution, which takes into account the different chemical compositions of the individual monolayers. It is shown that one interference fringe in a CBED spot is sufficient to reconstruct the distance between the layers, which can be practical for imaging samples with a relatively small twist angle or when probing small sample regions. The quality of the reconstructed interlayer distance is studied as a function of the twist angle. At smaller twist angles, the reconstructed interlayer distance distribution is more precise and artefact free. At larger twist angles, artefacts due to the moiré structure appear in the reconstruction. A method for the reconstruction of the average interlayer distance is presented. As for resolution, the interlayer distance can be reconstructed by the holographic approach at an accuracy of 0.5 A, which is a few hundred times better than the intrinsic z-resolution of diffraction limited resolution, as expressed through the spread of the measured k-values. Moreover, we show that holographic CBED imaging can detect variations as small as 0.1 A in the interlayer distance, though the quantitative reconstruction of such variations suffers from large errors. △ Less

Submitted 9 August, 2020; originally announced August 2020.

Entropy production rates of the climate

Authors: Goodwin Gibbins, Joanna D. Haigh

Abstract: There is ongoing interest in the global entropy production rate as a climate diagnostic and predictor, but progress has been limited by ambiguities in its definition; different conceptual boundaries of the climate system give rise to different internal production rates. Three viable options are described, estimated and investigated here, two of which -- the material and the total radiative (here '… ▽ More There is ongoing interest in the global entropy production rate as a climate diagnostic and predictor, but progress has been limited by ambiguities in its definition; different conceptual boundaries of the climate system give rise to different internal production rates. Three viable options are described, estimated and investigated here, two of which -- the material and the total radiative (here 'planetary') entropy production rates -- are well-established and a third which has only recently been considered but appears very promising. This new option is labelled the 'transfer' entropy production rate and includes all irreversible processes that transfer heat within the climate, radiative and material, but not those involved in the exchange of radiation with space. Estimates in three model climates put the material rate in the range $27$-$48$ mW/m$^2$K, the transfer rate $67$-$76$ mW/m$^2$K, and the planetary rate $1279$-$1312$ mW/m$^2$K. The climate-relevance of each rate is probed by calculating their responses to climate changes in a simple radiative-convective model. An increased greenhouse effect causes a significant increase in the material and transfer entropy production rates but has no direct impact on the planetary rate. When the same surface temperature increase is forced by changing the albedo instead, the material and transfer entropy production rates increase less dramatically and the planetary rate also registers an increase. This is pertinent to solar radiation management as it demonstrates the difficulty of reversing greenhouse gas-mediated climate changes by albedo alterations. It is argued that the transfer perspective has particular significance in the climate system and warrants increased prominence. △ Less

Submitted 5 August, 2020; originally announced August 2020.

Comments: This work has been accepted to the Journal of the Atmospheric Sciences. The AMS does not guarantee that the copy provided here is an accurate copy of the final published work

Off-Axis Characterisation of the CERN T10 Beam for low Momentum Proton Measurements with a High Pressure Gas Time Projection Chamber

Authors: S. B. Jones, T. S. Nonnenmacher, E. Atkin, G. J. Barker, A. Basharina-Freshville, C. Betancourt, S. B. Boyd, D. Brailsford, Z. Chen-Wishart, L. Cremonesi, A. Deisting, A. Dias, P. Dunne, J. Haigh, P. Hamacher-Baumann, A. Kaboth, A. Korzenev, W. Ma, P. Mermod, M. Mironova, J. Monroe, R. Nichol, J. Nowak, W. Parker, H. Ritchie-Yates , et al. (11 additional authors not shown)

Abstract: We present studies of proton fluxes in the T10 beamline at CERN. A prototype high pressure gas time projection chamber (TPC) was exposed to the beam of protons and other particles, using the 0.8 GeV/c momentum setting in T10, in order to make cross section measurements of low energy protons in argon. To explore the energy region comparable to hadrons produced by GeV-scale neutrino interactions at… ▽ More We present studies of proton fluxes in the T10 beamline at CERN. A prototype high pressure gas time projection chamber (TPC) was exposed to the beam of protons and other particles, using the 0.8 GeV/c momentum setting in T10, in order to make cross section measurements of low energy protons in argon. To explore the energy region comparable to hadrons produced by GeV-scale neutrino interactions at oscillation experiments, i.e., near 0.1 GeV of kinetic energy, methods of moderating the T10 beam were employed: the dual technique of moderating the beam with acrylic blocks and measuring scattered protons off the beam axis was used to decrease the kinetic energy of incident protons, as well as change the proton/minimum ionising particle (MIP) composition of the incident flux. Measurements of the beam properties were made using time of flight systems upstream and downstream of the TPC. The kinetic energy of protons reaching the TPC was successfully changed from $\sim0.3$ GeV without moderator blocks to less than 0.1 GeV with four moderator blocks (40 cm path length). The flux of both protons and MIPs off the beam axis was increased. The ratio of protons to MIPs vary as a function of the off-axis angle allowing for possible optimisation of the detector to select the type of required particles. Simulation informed by the time of flight measurements show that with four moderator blocks placed in the beamline, ($5.6 \pm 0.1$) protons with energies below 0.1 GeV per spill traversed the active TPC region. Measurements of the beam composition and energy are presented. △ Less

Submitted 30 July, 2020; originally announced July 2020.

Comments: 28 pages, 30 figures

Journal ref: Instruments (2020), 4, 21

The Benefits of Very Low Earth Orbit for Earth Observation Missions

Authors: N. H. Crisp, P. C. E. Roberts, S. Livadiotti, V. T. A. Oiko, S. Edmondson, S. J. Haigh, C. Huyton, L. Sinpetru, K. L. Smith, S. D. Worrall, J. Becedas, R. M. Domínguez, D. González, V. Hanessian, A. Mølgaard, J. Nielsen, M. Bisgaard, Y. -A. Chan, S. Fasoulas, G. H. Herdrich, F. Romano, C. Traub, D. García-Almiñana, S. Rodríguez-Donaire, M. Sureda , et al. (8 additional authors not shown)

Abstract: Very low Earth orbits (VLEO), typically classified as orbits below approximately 450 km in altitude, have the potential to provide significant benefits to spacecraft over those that operate in higher altitude orbits. This paper provides a comprehensive review and analysis of these benefits to spacecraft operations in VLEO, with parametric investigation of those which apply specifically to Earth ob… ▽ More Very low Earth orbits (VLEO), typically classified as orbits below approximately 450 km in altitude, have the potential to provide significant benefits to spacecraft over those that operate in higher altitude orbits. This paper provides a comprehensive review and analysis of these benefits to spacecraft operations in VLEO, with parametric investigation of those which apply specifically to Earth observation missions. The most significant benefit for optical imaging systems is that a reduction in orbital altitude improves spatial resolution for a similar payload specification. Alternatively mass and volume savings can be made whilst maintaining a given performance. Similarly, for radar and lidar systems, the signal-to-noise ratio can be improved. Additional benefits include improved geospatial position accuracy, improvements in communications link-budgets, and greater launch vehicle insertion capability. The collision risk with orbital debris and radiation environment can be shown to be improved in lower altitude orbits, whilst compliance with IADC guidelines for spacecraft post-mission lifetime and deorbit is also assisted. Finally, VLEO offers opportunities to exploit novel atmosphere-breathing electric propulsion systems and aerodynamic attitude and orbit control methods. However, key challenges associated with our understanding of the lower thermosphere, aerodynamic drag, the requirement to provide a meaningful orbital lifetime whilst minimising spacecraft mass and complexity, and atomic oxygen erosion still require further research. Given the scope for significant commercial, societal, and environmental impact which can be realised with higher performing Earth observation platforms, renewed research efforts to address the challenges associated with VLEO operations are required. △ Less

Submitted 16 July, 2020; v1 submitted 15 July, 2020; originally announced July 2020.

Comments: 23 pages, 19 figures. Accepted for publication in Progress in Aerospace Sciences (24-04-2020)

Journal ref: Progress in Aerospace Sciences 117 (2020)

First results on ProtoDUNE-SP liquid argon time projection chamber performance from a beam test at the CERN Neutrino Platform

Authors: DUNE Collaboration, B. Abi, A. Abed Abud, R. Acciarri, M. A. Acero, G. Adamov, M. Adamowski, D. Adams, P. Adrien, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, M. Antonova, S. Antusch, A. Aranda-Fernandez, A. Ariga , et al. (970 additional authors not shown)

Abstract: The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber with an active volume of $7.2\times 6.0\times 6.9$ m$^3$. It is installed at the CERN Neutrino Platform in a specially-constructed beam that delivers charged pions, kaons, protons, muons and electrons with momenta in the range 0.3 GeV$/c$ to 7 GeV/$c$. Beam line instrumentation provides accurate momentum measurements… ▽ More The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber with an active volume of $7.2\times 6.0\times 6.9$ m$^3$. It is installed at the CERN Neutrino Platform in a specially-constructed beam that delivers charged pions, kaons, protons, muons and electrons with momenta in the range 0.3 GeV$/c$ to 7 GeV/$c$. Beam line instrumentation provides accurate momentum measurements and particle identification. The ProtoDUNE-SP detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment, and it incorporates full-size components as designed for that module. This paper describes the beam line, the time projection chamber, the photon detectors, the cosmic-ray tagger, the signal processing and particle reconstruction. It presents the first results on ProtoDUNE-SP's performance, including noise and gain measurements, $dE/dx$ calibration for muons, protons, pions and electrons, drift electron lifetime measurements, and photon detector noise, signal sensitivity and time resolution measurements. The measured values meet or exceed the specifications for the DUNE far detector, in several cases by large margins. ProtoDUNE-SP's successful operation starting in 2018 and its production of large samples of high-quality data demonstrate the effectiveness of the single-phase far detector design. △ Less

Submitted 3 June, 2021; v1 submitted 13 July, 2020; originally announced July 2020.

Comments: 93 pages, 70 figures

Report number: FERMILAB-PUB-20-059-AD-ESH-LBNF-ND-SCD, CERN-EP-2020-125

Journal ref: JINST 15 (2020) P12004

Long-baseline neutrino oscillation physics potential of the DUNE experiment

Authors: DUNE Collaboration, B. Abi, R. Acciarri, M. A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, M. Antonova, S. Antusch, A. Aranda-Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (949 additional authors not shown)

Abstract: The sensitivity of the Deep Underground Neutrino Experiment (DUNE) to neutrino oscillation is determined, based on a full simulation, reconstruction, and event selection of the far detector and a full simulation and parameterized analysis of the near detector. Detailed uncertainties due to the flux prediction, neutrino interaction model, and detector effects are included. DUNE will resolve the neu… ▽ More The sensitivity of the Deep Underground Neutrino Experiment (DUNE) to neutrino oscillation is determined, based on a full simulation, reconstruction, and event selection of the far detector and a full simulation and parameterized analysis of the near detector. Detailed uncertainties due to the flux prediction, neutrino interaction model, and detector effects are included. DUNE will resolve the neutrino mass ordering to a precision of 5$σ$, for all $δ_{\mathrm{CP}}$ values, after 2 years of running with the nominal detector design and beam configuration. It has the potential to observe charge-parity violation in the neutrino sector to a precision of 3$σ$ (5$σ$) after an exposure of 5 (10) years, for 50\% of all $δ_{\mathrm{CP}}$ values. It will also make precise measurements of other parameters governing long-baseline neutrino oscillation, and after an exposure of 15 years will achieve a similar sensitivity to $\sin^{2} 2θ_{13}$ to current reactor experiments. △ Less

Submitted 6 December, 2021; v1 submitted 26 June, 2020; originally announced June 2020.

Comments: arXiv admin note: substantial text overlap with arXiv:2002.03005; Updated after referee comments

Report number: PUB-20-251-E-LBNF-ND-PIP2-SCD

Journal ref: Eur. Phys. J. C 80, 978 (2020)

Neutrino interaction classification with a convolutional neural network in the DUNE far detector

Authors: DUNE Collaboration, B. Abi, R. Acciarri, M. A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, M. Antonova, S. Antusch, A. Aranda-Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (951 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment is a next-generation neutrino oscillation experiment that aims to measure $CP$-violation in the neutrino sector as part of a wider physics program. A deep learning approach based on a convolutional neural network has been developed to provide highly efficient and pure selections of electron neutrino and muon neutrino charged-current interactions. The electr… ▽ More The Deep Underground Neutrino Experiment is a next-generation neutrino oscillation experiment that aims to measure $CP$-violation in the neutrino sector as part of a wider physics program. A deep learning approach based on a convolutional neural network has been developed to provide highly efficient and pure selections of electron neutrino and muon neutrino charged-current interactions. The electron neutrino (antineutrino) selection efficiency peaks at 90% (94%) and exceeds 85% (90%) for reconstructed neutrino energies between 2-5 GeV. The muon neutrino (antineutrino) event selection is found to have a maximum efficiency of 96% (97%) and exceeds 90% (95%) efficiency for reconstructed neutrino energies above 2 GeV. When considering all electron neutrino and antineutrino interactions as signal, a selection purity of 90% is achieved. These event selections are critical to maximize the sensitivity of the experiment to $CP$-violating effects. △ Less

Submitted 10 November, 2020; v1 submitted 26 June, 2020; originally announced June 2020.

Comments: 39 pages, 11 figures

Journal ref: Phys. Rev. D 102, 092003 (2020)

Raman Fingerprints of Graphene Produced by Anodic Electrochemical Exfoliation

Authors: Vaiva Nagyte, Daniel J. Kelly, Alexandre Felten, Gennaro Picardi, YuYoung Shin, Adriana Alieva, Robyn E. Worsley, Khaled Parvez, Simone Dehm, Ralph Krupke, Sarah J. Haigh, Antonios Oikonomou, Andrew J. Pollard, Cinzia Casiraghi

Abstract: Electrochemical exfoliation is one of the most promising methods for scalable production of graphene. However, limited understanding of its Raman spectrum as well as lack of measurement standards for graphene strongly limit its industrial applications. In this work we show a systematic study of the Raman spectrum of electrochemically exfoliated graphene, produced using different electrolytes and d… ▽ More Electrochemical exfoliation is one of the most promising methods for scalable production of graphene. However, limited understanding of its Raman spectrum as well as lack of measurement standards for graphene strongly limit its industrial applications. In this work we show a systematic study of the Raman spectrum of electrochemically exfoliated graphene, produced using different electrolytes and different types of solvents in varying amounts. We demonstrate that no information on the thickness can be extracted from the shape of the 2D peak as this type of graphene is defective. Furthermore, the number of defects and the uniformity of the samples strongly depend on the experimental conditions, including post-processing. Under specific conditions, formation of short conductive trans-polyacetylene chains has been observed. Our Raman analysis provides guidance for the community on how to get information on defects coming from electrolyte, temperature and other experimental conditions, by making Raman spectroscopy a powerful metrology tool. △ Less

Submitted 15 April, 2020; originally announced June 2020.

Comments: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Nano Letters, American Chemical Society after peer review. To access the final edited and published work, included the SI, see DOI: 10.1021/acs.nanolett.0c00332

Large magnetoelectric coupling in multiferroic oxide heterostructures assembled via epitaxial lift-off

Authors: David Pesquera, Ekaterina Khestanova, Massimo Ghidini, Sen Zhang, Aidan P. Rooney, Francesco Maccherozzi, Patricia Riego, Saeedeh Farokhipoor, Jiyeob Kim, Xavier Moya, Mary E. Vickers, Nadia A. Stelmashenko, Sarah J. Haigh, Sarnjeet S. Dhesi, Neil D. Mathur

Abstract: The strain dependent functional properties of epitaxial transition metal oxide films can be significantly modified via substrate selection. However, large lattice mismatches preclude dislocation-free epitaxial growth on ferroelectric substrates, whose strain states are modified by applied electric fields. Here we overcome this mismatch problem by depositing an epitaxial film of ferromagnetic La0.7… ▽ More The strain dependent functional properties of epitaxial transition metal oxide films can be significantly modified via substrate selection. However, large lattice mismatches preclude dislocation-free epitaxial growth on ferroelectric substrates, whose strain states are modified by applied electric fields. Here we overcome this mismatch problem by depositing an epitaxial film of ferromagnetic La0.7Sr0.3MnO3 on a single crystal substrate of well lattice matched SrTiO3 via a film of SrRuO3 that we subsequently dissolved, permitting the transfer of unstrained La0.7Sr0.3MnO3 to a ferroelectric substrate of 0.68Pb(Mg1/3Nb2/3)O3 0.32PbTiO3 in a different crystallographic orientation. Ferroelectric domain switching, and a concomitant ferroelectric phase transition, produced large non volatile changes of magnetization that were mediated by magnetic domain rotations at locations defined by the microstructure - as revealed via high resolution vector maps of magnetization constructed from photoemission electron microscopy data, with contrast from x-ray magnetic circular dichroism. In future, our method may be exploited to control functional properties in dislocation free epitaxial films of any composition. △ Less

Submitted 2 June, 2020; v1 submitted 29 May, 2020; originally announced June 2020.

Journal ref: Nat Commun 11, 3190 (2020)

Graphene-TiS$_3$ heterojunction for selective polar vapor sensing at room temperature

Authors: Nassim Rafiefard, Azam Iraji zad, Ali Esfandiar, Pezhman Sasanpour, Somayeh Fardindoost, Yichao Zou, Sarah. J. Haigh, Seyed Hossein Hosseini

Abstract: In this work, the room temperature polar vapor sensing behavior of two dimentional (2D) heterojunction Graphene-TiS3 materials and TiS3 nanoribbons is investigated. TiS3 nanoribbons were synthesized via chemical vapor transport (CVT) and their structure was investigated by scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), energy dispersive X- ray spectro… ▽ More In this work, the room temperature polar vapor sensing behavior of two dimentional (2D) heterojunction Graphene-TiS3 materials and TiS3 nanoribbons is investigated. TiS3 nanoribbons were synthesized via chemical vapor transport (CVT) and their structure was investigated by scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), energy dispersive X- ray spectroscopy (EDS), X-ray diffraction (XRD), Raman spectroscopy and Fourier transform infrared spectroscopy (FT-IR) analysis. The gas sensing performance of the TiS3 nanoribbons was assessed through the observed changes in their electronic behavior. Sensing devices were fabricated with gold contacts and with lithographically patterned graphene (Gr) electrodes in a 2D heterojunction Gr-TiS3-Gr architecture.. It is observed that the gold contacted TiS3 device has a rather linear I-V behavior while the Gr-TiS3-Gr heterojunction forms a contact with a higher Schottky barrier (250 meV). I-V responses of the sensors were recorded at room temperature with a relative humidity of 55% and for different ethanol vapor concentrations (varying from 2 to 20 ppm). I-V plots indicated an increase in the resistance of Gr-TiS3-Gr by the adsorption of water and ethanol molecules with relatively high sensing response (~3353% at 2 ppm). Our results reveal that selective and stable responses to a low concentration of ethanol vapor (2 ppm) can be achieved at room temperature with transient response and recovery times of around 6 s and 40 s, respectively. Our proposed design demonstrate a new approach for selective molecular recognition using polar interactions between analyte vapors and heterojunctions of 2D-materials. △ Less

Submitted 28 May, 2020; originally announced May 2020.

Journal ref: Microchim Acta 187, 117 (2020)

Measurements of $\barν_μ$ and $\barν_μ + ν_μ$ charged-current cross-sections without detected pions nor protons on water and hydrocarbon at mean antineutrino energy of 0.86 GeV

Authors: K. Abe, N. Akhlaq, R. Akutsu, A. Ali, C. Alt, C. Andreopoulos, L. Anthony, M. Antonova, S. Aoki, A. Ariga, T. Arihara, Y. Asada, Y. Ashida, E. T. Atkin, Y. Awataguchi, S. Ban, M. Barbi, G. J. Barker, G. Barr, D. Barrow, C. Barry, M. Batkiewicz-Kwasniak, A. Beloshapkin, F. Bench, V. Berardi , et al. (344 additional authors not shown)

Abstract: We report measurements of the flux-integrated $\barν_μ$ and $\barν_μ+ν_μ$ charged-current cross-sections on water and hydrocarbon targets using the T2K anti-neutrino beam, with a mean neutrino energy of 0.86 GeV. The signal is defined as the (anti-)neutrino charged-current interaction with one induced $μ^\pm$ and no detected charged pion nor proton. These measurements are performed using a new WAG… ▽ More We report measurements of the flux-integrated $\barν_μ$ and $\barν_μ+ν_μ$ charged-current cross-sections on water and hydrocarbon targets using the T2K anti-neutrino beam, with a mean neutrino energy of 0.86 GeV. The signal is defined as the (anti-)neutrino charged-current interaction with one induced $μ^\pm$ and no detected charged pion nor proton. These measurements are performed using a new WAGASCI module recently added to the T2K setup in combination with the INGRID Proton module. The phase space of muons is restricted to the high-detection efficiency region, $p_μ>400~{\rm MeV}/c$ and $θ_μ<30^{\circ}$, in the laboratory frame. Absence of pions and protons in the detectable phase space of "$p_π>200~{\rm MeV}/c$ and $θ_π<70^{\circ}$", and "$p_{\rm p}>600~{\rm MeV}/c$ and $θ_{\rm p}<70^{\circ}$" is required. In this paper, both of the $\barν_μ$ cross-sections and $\barν_μ+ν_μ$ cross-sections on water and hydrocarbon targets, and their ratios are provided by using D'Agostini unfolding method. The results of the integrated $\barν_μ$ cross-section measurements over this phase space are $σ_{\rm H_{2}O}\,=\,(1.082\pm0.068(\rm stat.)^{+0.145}_{-0.128}(\rm syst.)) \times 10^{-39}~{\rm cm^{2}/nucleon}$, $σ_{\rm CH}\,=\,(1.096\pm0.054(\rm stat.)^{+0.132}_{-0.117}(\rm syst.)) \times 10^{-39}~{\rm cm^{2}/nucleon}$, and $σ_{\rm H_{2}O}/σ_{\rm CH} = 0.987\pm0.078(\rm stat.)^{+0.093}_{-0.090}(\rm syst.)$. The $\barν_μ+ν_μ$ cross-section is $σ_{\rm H_{2}O} = (1.155\pm0.064(\rm stat.)^{+0.148}_{-0.129}(\rm syst.)) \times 10^{-39}~{\rm cm^{2}/nucleon}$, $σ_{\rm CH}\,=\,(1.159\pm0.049(\rm stat.)^{+0.129}_{-0.115}(\rm syst.)) \times 10^{-39}~{\rm cm^{2}/nucleon}$, and $σ_{\rm H_{2}O}/σ_{\rm CH}\,=\,0.996\pm0.069(\rm stat.)^{+0.083}_{-0.078}(\rm syst.)$. △ Less

Submitted 29 April, 2020; originally announced April 2020.

Journal ref: Prog Theor Exp Phys (2021)

Design-controlled Synthesis of IrO$_2$ sub-monolayers on Au Nanodendrites: Marrying Plasmonic and Electrocatalytic Properties

Authors: Isabel C. de Freitas, Luanna S. Parreira, Eduardo C. M. Barbosa, Barbara A. Novaes, Tong Mou, Tiago. V. Alves, Jhon Quiroz, Yi-Chi Wang, Thomas J Slater, Andrew Thomas, Bin Wang, Sarah J Haigh, Pedro H. C. Camargoa

Abstract: We develop herein plasmonic-catalytic Au-IrO$_2$ nanostructures with a morphology optimized for efficient light harvesting and catalytic surface area; the nanoparticles have a dendritic morphology, with closely spaced Au branches all partially covered by an ultrathin (1 nm) IrO$_2$ shell. This nanoparticle architecture optimizes optical features due to the interactions of closely spaced plasmonic… ▽ More We develop herein plasmonic-catalytic Au-IrO$_2$ nanostructures with a morphology optimized for efficient light harvesting and catalytic surface area; the nanoparticles have a dendritic morphology, with closely spaced Au branches all partially covered by an ultrathin (1 nm) IrO$_2$ shell. This nanoparticle architecture optimizes optical features due to the interactions of closely spaced plasmonic branches forming electromagnetic hot spots, and the ultra-thin IrO$_2$ layer maximizes efficient use of this expensive catalyst. This concept was evaluated towards the enhancement of the electrocatalytic performances towards the oxygen evolution reaction (OER) as a model transformation. The OER can play a central role in meeting future energy demands but the performance of conventional electrocatalysts in this reaction is limited by the sluggish OER kinetics. We demonstrate an improvement of the OER performance for one of the most active OER catalysts, IrO$_2$, by harvesting plasmonic effects from visible light illumination in multimetallic nanoparticles. We find that the OER activity for the Au-IrO$_2$ nanodendrites can be improved under LSPR excitation, matching best properties reported in the literature. Our simulations and electrocatalytic data demonstrate that the enhancement in OER activities can be attributed to an electronic interaction between Au and IrO$_2$ and to the activation of Ir-O bonds by LSPR excited hot holes, leading to a change in the reaction mechanism (rate-determinant step) under visible light illumination. △ Less

Submitted 20 April, 2020; originally announced April 2020.

Comments: 5 figures

Simultaneous measurement of the muon neutrino charged-current cross section on oxygen and carbon without pions in the final state at T2K

Authors: K. Abe, N. Akhlaq, R. Akutsu, A. Ali, C. Alt, C. Andreopoulos, L. Anthony, M. Antonova, S. Aoki, A. Ariga, T. Arihara, Y. Asada, Y. Ashida, E. T. Atkin, Y. Awataguchi, S. Ban, M. Barbi, G. J. Barker, G. Barr, D. Barrow, M. Batkiewicz-Kwasniak, A. Beloshapkin, F. Bench, V. Berardi, L. Berns , et al. (308 additional authors not shown)

Abstract: This paper reports the first simultaneous measurement of the double differential muon neutrino charged-current cross section on oxygen and carbon without pions in the final state as a function of the outgoing muon kinematics, made at the ND280 off-axis near detector of the T2K experiment. The ratio of the oxygen and carbon cross sections is also provided to help validate various models' ability to… ▽ More This paper reports the first simultaneous measurement of the double differential muon neutrino charged-current cross section on oxygen and carbon without pions in the final state as a function of the outgoing muon kinematics, made at the ND280 off-axis near detector of the T2K experiment. The ratio of the oxygen and carbon cross sections is also provided to help validate various models' ability to extrapolate between carbon and oxygen nuclear targets, as is required in T2K oscillation analyses. The data are taken using a neutrino beam with an energy spectrum peaked at 0.6 GeV. The extracted measurement is compared with the prediction from different Monte Carlo neutrino-nucleus interaction event generators, showing particular model separation for very forward-going muons. Overall, of the models tested, the result is best described using Local Fermi Gas descriptions of the nuclear ground state with RPA suppression. △ Less

Submitted 19 June, 2020; v1 submitted 11 April, 2020; originally announced April 2020.

Journal ref: Phys. Rev. D 101, 112004 (2020)

Large dispersive interaction between a CMOS double quantum dot and microwave photons

Authors: David J. Ibberson, Theodor Lundberg, James A. Haigh, Louis Hutin, Benoit Bertrand, Sylvain Barraud, Chang-Min Lee, Nadia A. Stelmashenko, Giovanni A. Oakes, Laurence Cochrane, Jason W. A. Robinson, Maud Vinet, M. Fernando Gonzalez-Zalba, Lisa A. Ibberson

Abstract: We report fast charge state readout of a double quantum dot in a CMOS split-gate silicon nanowire transistor via the large dispersive interaction with microwave photons in a lumped-element resonator formed by hybrid integration with a superconducting inductor. We achieve a coupling rate $g_0/(2π) = 204 \pm 2$ MHz by exploiting the large interdot gate lever arm of an asymmetric split-gate device,… ▽ More We report fast charge state readout of a double quantum dot in a CMOS split-gate silicon nanowire transistor via the large dispersive interaction with microwave photons in a lumped-element resonator formed by hybrid integration with a superconducting inductor. We achieve a coupling rate $g_0/(2π) = 204 \pm 2$ MHz by exploiting the large interdot gate lever arm of an asymmetric split-gate device, $α=0.72$, and by inductively coupling to the resonator to increase its impedance, $Z_\text{r}=560~Ω$. In the dispersive regime, the large coupling strength at the double quantum dot hybridisation point produces a frequency shift comparable to the resonator linewidth, the optimal setting for maximum state visibility. We exploit this regime to demonstrate rapid dispersive readout of the charge degree of freedom, with a SNR of 3.3 in 50 ns. In the resonant regime, the fast charge decoherence rate precludes reaching the strong coupling regime, but we show a clear route to spin-photon circuit quantum electrodynamics using hybrid CMOS systems. △ Less

Submitted 14 May, 2021; v1 submitted 1 April, 2020; originally announced April 2020.

Comments: Accepted manuscript

Journal ref: PRX Quantum 2, 020315 (2021)

Convergent beam electron diffraction of multilayer van der Waals structures

Authors: Tatiana Latychevskaia, Colin Robert Woods, Yi Bo Wang, Matthew Holwill, Eric Prestat, Sarah J. Haigh, Kostya S. Novoselov

Abstract: Convergent beam electron diffraction is routinely applied for studying deformation and local strain in thick crystals by matching the crystal structure to the observed intensity distributions. Recently, it has been demonstrated that CBED can be applied for imaging two-dimensional (2D) crystals where a direct reconstruction is possible and three-dimensional crystal deformations at a nanometre resol… ▽ More Convergent beam electron diffraction is routinely applied for studying deformation and local strain in thick crystals by matching the crystal structure to the observed intensity distributions. Recently, it has been demonstrated that CBED can be applied for imaging two-dimensional (2D) crystals where a direct reconstruction is possible and three-dimensional crystal deformations at a nanometre resolution can be retrieved. Here, we demonstrate that second-order effects allow for further information to be obtained regarding stacking arrangements between the crystals. Such effects are especially pronounced in samples consisting of multiple layers of 2D crystals. We show, using simulations and experiments, that twisted multilayer samples exhibit extra modulations of interference fringes in CBED patterns, i. e., a CBED moiré. A simple and robust method for the evaluation of the composition and the number of layers from a single-shot CBED pattern is demonstrated. △ Less

Submitted 28 March, 2020; originally announced March 2020.

Journal ref: Ultramicroscopy 212, 112976 (2020)

Measurement of the charged-current electron (anti-)neutrino inclusive cross-sections at the T2K off-axis near detector ND280

Authors: K. Abe, N. Akhlaq, R. Akutsu, A. Ali, C. Alt, C. Andreopoulos, L. Anthony, M. Antonova, S. Aoki, A. Ariga, T. Arihara, Y. Asada, Y. Ashida, E. T. Atkin, Y. Awataguchi, S. Ban, M. Barbi, G. J. Barker, G. Barr, D. Barrow, C. Barry, M. Batkiewicz-Kwasniak, A. Beloshapkin, F. Bench, V. Berardi , et al. (344 additional authors not shown)

Abstract: The electron (anti-)neutrino component of the T2K neutrino beam constitutes the largest background in the measurement of electron (anti-)neutrino appearance at the far detector. The electron neutrino scattering is measured directly with the T2K off-axis near detector, ND280. The selection of the electron (anti-)neutrino events in the plastic scintillator target from both neutrino and anti-neutrino… ▽ More The electron (anti-)neutrino component of the T2K neutrino beam constitutes the largest background in the measurement of electron (anti-)neutrino appearance at the far detector. The electron neutrino scattering is measured directly with the T2K off-axis near detector, ND280. The selection of the electron (anti-)neutrino events in the plastic scintillator target from both neutrino and anti-neutrino mode beams is discussed in this paper. The flux integrated single differential charged-current inclusive electron (anti-)neutrino cross-sections, $dσ/dp$ and $dσ/d\cos(θ)$, and the total cross-sections in a limited phase-space in momentum and scattering angle ($p > 300$ MeV/c and $θ\leq 45^{\circ}$) are measured using a binned maximum likelihood fit and compared to the neutrino Monte Carlo generator predictions, resulting in good agreement. △ Less

Submitted 27 October, 2020; v1 submitted 27 February, 2020; originally announced February 2020.

Journal ref: J. High Energ. Phys. 2020, 114 (2020)

First combined measurement of the muon neutrino and antineutrino charged-current cross section without pions in the final state at T2K

Authors: K. Abe, R. Akutsu, A. Ali, C. Alt, C. Andreopoulos, L. Anthony, M. Antonova, S. Aoki, A. Ariga, T. Arihara, Y. Asada, Y. Ashida, E. T. Atkin, Y. Awataguchi, S. Ban, M. Barbi, G. J. Barker, G. Barr, D. Barrow, C. Barry, M. Batkiewicz-Kwasniak, A. Beloshapkin, F. Bench, V. Berardi, L. Berns , et al. (327 additional authors not shown)

Abstract: This paper presents the first combined measurement of the double-differential muon neutrino and antineutrino charged-current cross sections with no pions in the final state on hydrocarbon at the off-axis near detector of the T2K experiment. The data analyzed in this work comprise 5.8$\times$10$^{20}$ and 6.3$\times$10$^{20}$ protons on target in neutrino and antineutrino mode respectively, at a be… ▽ More This paper presents the first combined measurement of the double-differential muon neutrino and antineutrino charged-current cross sections with no pions in the final state on hydrocarbon at the off-axis near detector of the T2K experiment. The data analyzed in this work comprise 5.8$\times$10$^{20}$ and 6.3$\times$10$^{20}$ protons on target in neutrino and antineutrino mode respectively, at a beam energy peak of 0.6 GeV. Using the two measured cross sections, the sum, difference and asymmetry were calculated with the aim of better understanding the nuclear effects involved in such interactions. The extracted measurements have been compared with the prediction from different Monte Carlo generators and theoretical models showing that the difference between the two cross sections have interesting sensitivity to nuclear effects. △ Less

Submitted 7 May, 2020; v1 submitted 21 February, 2020; originally announced February 2020.

Journal ref: Phys. Rev. D 101, 112001 (2020)

Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume IV: Far Detector Single-phase Technology

Authors: B. Abi, R. Acciarri, Mario A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, J. Anthony, M. Antonova, S. Antusch, A. Aranda Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (941 additional authors not shown)

Abstract: The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. DUNE is an international world-clas… ▽ More The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. DUNE is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. Central to achieving DUNE's physics program is a far detector that combines the many tens-of-kiloton fiducial mass necessary for rare event searches with sub-centimeter spatial resolution in its ability to image those events, allowing identification of the physics signatures among the numerous backgrounds. In the single-phase liquid argon time-projection chamber (LArTPC) technology, ionization charges drift horizontally in the liquid argon under the influence of an electric field towards a vertical anode, where they are read out with fine granularity. A photon detection system supplements the TPC, directly enhancing physics capabilities for all three DUNE physics drivers and opening up prospects for further physics explorations. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. Volume IV presents an overview of the basic operating principles of a single-phase LArTPC, followed by a description of the DUNE implementation. Each of the subsystems is described in detail, connecting the high-level design requirements and decisions to the overriding physics goals of DUNE. △ Less

Submitted 8 September, 2020; v1 submitted 7 February, 2020; originally announced February 2020.

Comments: Minor corrections made for JINST submission, 673 pages, 312 figures (corrected errors in author list)

Report number: FERMILAB-PUB-20-027-ND

Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume III: DUNE Far Detector Technical Coordination

Authors: B. Abi, R. Acciarri, Mario A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, J. Anthony, M. Antonova, S. Antusch, A. Aranda Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (941 additional authors not shown)

Abstract: The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Exper… ▽ More The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Experiment (DUNE) is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. Volume III of this TDR describes how the activities required to design, construct, fabricate, install, and commission the DUNE far detector modules are organized and managed. This volume details the organizational structures that will carry out and/or oversee the planned far detector activities safely, successfully, on time, and on budget. It presents overviews of the facilities, supporting infrastructure, and detectors for context, and it outlines the project-related functions and methodologies used by the DUNE technical coordination organization, focusing on the areas of integration engineering, technical reviews, quality assurance and control, and safety oversight. Because of its more advanced stage of development, functional examples presented in this volume focus primarily on the single-phase (SP) detector module. △ Less

Submitted 8 September, 2020; v1 submitted 7 February, 2020; originally announced February 2020.

Comments: Minor corrections made for JINST submission, 209 pages, 55 figures (updated typos in Table A.5; corrected errors in author list)

Report number: FERMILAB-PUB-20-026-ND

Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume II: DUNE Physics

Authors: B. Abi, R. Acciarri, Mario A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, J. Anthony, M. Antonova, S. Antusch, A. Aranda Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (941 additional authors not shown)

Abstract: The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. DUNE is an international world-clas… ▽ More The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. DUNE is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. Volume II of this TDR, DUNE Physics, describes the array of identified scientific opportunities and key goals. Crucially, we also report our best current understanding of the capability of DUNE to realize these goals, along with the detailed arguments and investigations on which this understanding is based. This TDR volume documents the scientific basis underlying the conception and design of the LBNF/DUNE experimental configurations. As a result, the description of DUNE's experimental capabilities constitutes the bulk of the document. Key linkages between requirements for successful execution of the physics program and primary specifications of the experimental configurations are drawn and summarized. This document also serves a wider purpose as a statement on the scientific potential of DUNE as a central component within a global program of frontier theoretical and experimental particle physics research. Thus, the presentation also aims to serve as a resource for the particle physics community at large. △ Less

Submitted 25 March, 2020; v1 submitted 7 February, 2020; originally announced February 2020.

Comments: 357 pages, 165 figures (updated typos in Table 6.1 and corrected errors in author list)

Report number: FERMILAB-PUB-20-025-ND