-
A Coarse-grained Model for Aqueous Two-phase Systems: Application to Ferrofluids
Authors:
Alberto Scacchi,
Carlo Rigoni,
Mikko Haataja,
Jaakko V. I. Timonen,
Maria Sammalkorpi
Abstract:
Aqueous two-phase systems (ATPSs), that is, phase-separating solutions of water soluble but mutually immiscible molecular species, offer fascinating prospects for selective partitioning, purification, and extraction. Here, we formulate a general Brownian dynamics based coarse-grained simulation model for a polymeric ATPS comprising two water soluble but mutually immiscible polymer species. A third…
▽ More
Aqueous two-phase systems (ATPSs), that is, phase-separating solutions of water soluble but mutually immiscible molecular species, offer fascinating prospects for selective partitioning, purification, and extraction. Here, we formulate a general Brownian dynamics based coarse-grained simulation model for a polymeric ATPS comprising two water soluble but mutually immiscible polymer species. A third solute species, representing, e.g., nanoparticles (NPs), additional macromolecular species, or impurities can readily be incorporated into the model. We demonstrate that the model captures satisfactorily the phase separation, partitioning, and interfacial properties of a model ATPS composed of a polymer mixture of dextran and polyethylene glycol (PEG) in which magnetic NPs selectively partition into one of the two polymeric phases. The NP partitioning is characterized both via the computational model and experimentally under different conditions. The simulation model captures the trends observed in the experiments and quantitatively links the partitioning behavior to the component species interactions. Finally, the response of the simulation model to external magnetic field, with the magnetic NPs as the additional partitioned component, shows that the ATPS interface fluctuations can be controlled by the magnetic field at length scales much smaller than those probed experimentally to date.
△ Less
Submitted 28 November, 2023;
originally announced November 2023.
-
A minimal model for liquid-liquid phase separation and aging of chemically reactive macromolecular mixtures
Authors:
Ruoyao Zhang,
Sheng Mao,
Mikko Haataja
Abstract:
Mixtures of several macromolecular species can lead to the formation of higher-order structures that often display non-ideal mixing behavior. In this work, we propose a minimal model of a quaternary system which considers the formation of a complex via a chemical reaction involving two macromolecular species; the complex may then phase separate from the buffer and undergo a further transition into…
▽ More
Mixtures of several macromolecular species can lead to the formation of higher-order structures that often display non-ideal mixing behavior. In this work, we propose a minimal model of a quaternary system which considers the formation of a complex via a chemical reaction involving two macromolecular species; the complex may then phase separate from the buffer and undergo a further transition into a gel-like state over time. First, a ternary phase diagram that captures the volume fraction of each species and phases at equilibrium is constructed. Specifically, we investigate how physical parameters such as stoichiometric coefficients, molecular sizes and interaction parameters affect LLPS and aging. Finally, we analyze the thermodynamic stability of the two-phase system and identify the spinodal regions, and outline the generalization of our approach to reactive biomolecular systems with an arbitrary number of components.
△ Less
Submitted 12 December, 2022;
originally announced December 2022.
-
Liquid demixing in elastic networks: cavitation, permeation, or size selection?
Authors:
Pierre Ronceray,
Sheng Mao,
Andrej Košmrlj,
Mikko P. Haataja
Abstract:
Demixing of multicomponent biomolecular systems via liquid-liquid phase separation (LLPS) has emerged as a potentially unifying mechanism governing the formation of several membrane-less intracellular organelles ("condensates"), both in the cytoplasm (e.g., stress granules) and in the nucleoplasm (e.g., nucleoli). While both in vivo experiments and studies of synthetic systems demonstrate that LLP…
▽ More
Demixing of multicomponent biomolecular systems via liquid-liquid phase separation (LLPS) has emerged as a potentially unifying mechanism governing the formation of several membrane-less intracellular organelles ("condensates"), both in the cytoplasm (e.g., stress granules) and in the nucleoplasm (e.g., nucleoli). While both in vivo experiments and studies of synthetic systems demonstrate that LLPS is strongly affected by the presence of a macromolecular elastic network, a fundamental understanding of the role of such networks on LLPS is still lacking. Here we show that, upon accounting for capillary forces responsible for network expulsion, small-scale heterogeneity of the network, and its nonlinear mechanical properties, an intriguing picture of LLPS emerges. Specifically, we predict that, in addition to the experimentally observed cavitated droplets which fully exclude the network, two other phases are thermodynamically possible: elastically arrested, size-limited droplets at the network pore scale, and network-including macroscopic droplets. In particular, pore size-limited droplets may emerge in chromatin networks, with implications for structure and function of nucleoplasmic condensates.
△ Less
Submitted 8 February, 2021; v1 submitted 4 February, 2021;
originally announced February 2021.
-
Phase behavior and morphology of multicomponent liquid mixtures
Authors:
Sheng Mao,
Derek Kuldinow,
Mikko P. Haataja,
Andrej Kosmrlj
Abstract:
Multicomponent systems are ubiquitous in nature and industry. While the physics of few-component liquid mixtures (i.e., binary and ternary ones) is well-understood and routinely taught in undergraduate courses, the thermodynamic and kinetic properties of $N$-component mixtures with $N>3$ have remained relatively unexplored. An example of such a mixture is provided by the intracellular fluid, in wh…
▽ More
Multicomponent systems are ubiquitous in nature and industry. While the physics of few-component liquid mixtures (i.e., binary and ternary ones) is well-understood and routinely taught in undergraduate courses, the thermodynamic and kinetic properties of $N$-component mixtures with $N>3$ have remained relatively unexplored. An example of such a mixture is provided by the intracellular fluid, in which protein-rich droplets phase separate into distinct membraneless organelles. In this work, we investigate equilibrium phase behavior and morphology of $N$-component liquid mixtures within the Flory-Huggins theory of regular solutions. In order to determine the number of coexisting phases and their compositions, we developed a new algorithm for constructing complete phase diagrams, based on numerical convexification of the discretized free energy landscape. Together with a Cahn-Hilliard approach for kinetics, we employ this method to study mixtures with $N=4$ and $5$ components. We report on both the coarsening behavior of such systems, as well as the resulting morphologies in three spatial dimensions. We discuss how the number of coexisting phases and their compositions can be extracted with Principal Component Analysis (PCA) and K-Means clustering algorithms. Finally, we discuss how one can reverse engineer the interaction parameters and volume fractions of components in order to achieve a range of desired packing structures, such as nested `Russian dolls' and encapsulated Janus droplets.
△ Less
Submitted 8 October, 2018;
originally announced October 2018.
-
Quartz tuning fork as a probe of surface waves
Authors:
Igor Todoshchenko,
Alexander Savin,
Miika Haataja,
Jukka-Pekka Kaikkonen,
Pertti Hakonen
Abstract:
Quartz tuning forks are high-quality mechanical oscillators widely used in low temperature physics as viscometers, thermometers and pressure sensors. We demonstrate that a fork placed in liquid helium near the surface of solid helium is very sensitive to the oscillations of the solid-liquid interface. We developed a double-resonance read-out technique which allowed us to detect oscillations of the…
▽ More
Quartz tuning forks are high-quality mechanical oscillators widely used in low temperature physics as viscometers, thermometers and pressure sensors. We demonstrate that a fork placed in liquid helium near the surface of solid helium is very sensitive to the oscillations of the solid-liquid interface. We developed a double-resonance read-out technique which allowed us to detect oscillations of the surface with an accuracy of 1 Angs in 10 sec. Using this technique we have investigated crystallization waves in 4He down to 10 mK. In contrast to previous studies of crystallization waves, our measurement scheme has very low dissipation, on the order of 20 pW, which allows us to carry out experiments even at sub-mK temperatures. We propose to use this scheme in the search for crystallization waves in 3He, which exist only at temperatures well below 0.5 mK.
△ Less
Submitted 19 December, 2016; v1 submitted 12 December, 2016;
originally announced December 2016.
-
Continuum Elasticity Theory Approach for Spontaneous Bending and Twisting of Ribbons Induced by Mechanical Anisotropy
Authors:
Zi Chen,
Carmel Majidi,
David J. Srolovitz,
Mikko Haataja
Abstract:
Helical ribbons arise in many biological and engineered systems, often driven by anisotropic surface stress, residual strain, and geometric or elastic mismatch between layers of a laminated composite. A full mathematical analysis is developed to analytically predict the equilibrium deformed helical shape of an initially flat, straight ribbon, with prescribed magnitudes and orientations of the prin…
▽ More
Helical ribbons arise in many biological and engineered systems, often driven by anisotropic surface stress, residual strain, and geometric or elastic mismatch between layers of a laminated composite. A full mathematical analysis is developed to analytically predict the equilibrium deformed helical shape of an initially flat, straight ribbon, with prescribed magnitudes and orientations of the principal curvatures when subjected to arbitrary surface stress and/or internal residual strain distribution. The helix angle, radius, axis and chirality of the deformed helical ribbons are predicted with a comprehensive, three-dimensional model that incorporates elasticity, differential geometry, and variational principles. In general, the mechanical anisotropy (e.g., in surface/external stress, residual strain or elastic modulus) will lead to spontaneous, three-dimensional helical deformations. Ring shapes are formed when the principle axes of deformation coincide with the geometric axes of the ribbon. The transition from cylindrical helical ribbons to purely twisted ribbons, or tubular structures is controlled by tuning relevant geometric parameters. Analytic, closed-form predictions of the ribbon shapes are validated with simple, table-top experiments. This theoretical approach represent a tool to inform the design of materials and systems in order to achieve desired helical geometries on demand.
△ Less
Submitted 14 September, 2012;
originally announced September 2012.
-
Nonlinear geometric effects in mechanical bistable morphing structures
Authors:
Zi Chen,
Qiaohang Guo,
Carmel Majidi,
Wenzhe Chen,
David J. Srolovitz,
Mikko P. Haataja
Abstract:
Bistable structures associated with non-linear deformation behavior, exemplified by the Venus flytrap and slap bracelet, can switch between different functional shapes upon actuation. Despite numerous efforts in modeling such large deformation behavior of shells, the roles of mechanical and nonlinear geometric effects on bistability remain elusive. We demonstrate, through both theoretical analysis…
▽ More
Bistable structures associated with non-linear deformation behavior, exemplified by the Venus flytrap and slap bracelet, can switch between different functional shapes upon actuation. Despite numerous efforts in modeling such large deformation behavior of shells, the roles of mechanical and nonlinear geometric effects on bistability remain elusive. We demonstrate, through both theoretical analysis and table-top experiments, that two dimensionless parameters control bistability. Our work classifies the conditions for bistability, and extends the large deformation theory of plates and shells.
△ Less
Submitted 8 September, 2012; v1 submitted 20 June, 2012;
originally announced June 2012.
-
Coarse-graining the Dynamics of a Driven Interface in the Presence of Mobile Impurities: Effective Description via Diffusion Maps
Authors:
Benjamin E. Sonday,
Mikko Haataja,
Ioannis G. Kevrekidis
Abstract:
Develo** effective descriptions of the microscopic dynamics of many physical phenomena can both dramatically enhance their computational exploration and lead to a more fundamental understanding of the underlying physics. Previously, an effective description of a driven interface in the presence of mobile impurities, based on an Ising variant model and a single empirical coarse variable, was pa…
▽ More
Develo** effective descriptions of the microscopic dynamics of many physical phenomena can both dramatically enhance their computational exploration and lead to a more fundamental understanding of the underlying physics. Previously, an effective description of a driven interface in the presence of mobile impurities, based on an Ising variant model and a single empirical coarse variable, was partially successful; yet it underlined the necessity of selecting additional coarse variables in certain parameter regimes. In this paper we use a data mining approach to help identify the coarse variables required. We discuss the implementation of this diffusion map approach, the selection of a similarity measure between system snapshots required in the approach, and the correspondence between empirically selected and automatically detected coarse variables. We conclude by illustrating the use of the diffusion map variables in assisting the atomistic simulations, and we discuss the translation of information between fine and coarse descriptions using lifting and restriction operators.
△ Less
Submitted 17 April, 2009; v1 submitted 16 April, 2009;
originally announced April 2009.
-
Phase-field Crystals with Elastic Interactions
Authors:
Peter Stefanovic,
Mikko Haataja,
Nikolas Provatas
Abstract:
We report on a novel extension of the recent phase-field crystal (PFC) method introduced in [Elder et al., Phys. Rev. Lett., Vol. 88, 245701:1-4 (2002)], which incorporates elastic interactions as well as crystal plasticity and diffusive dynamics. In our model, elastic interactions are mediated through wave modes that propagate on time scales many orders of magnitude slower than atomic vibration…
▽ More
We report on a novel extension of the recent phase-field crystal (PFC) method introduced in [Elder et al., Phys. Rev. Lett., Vol. 88, 245701:1-4 (2002)], which incorporates elastic interactions as well as crystal plasticity and diffusive dynamics. In our model, elastic interactions are mediated through wave modes that propagate on time scales many orders of magnitude slower than atomic vibrations but still much faster than diffusive times scales. This allows us to preserve the quintessential advantage of the PFC model: the ability to simulate atomic-scale interactions and dynamics on time scales many orders of magnitude longer than characteristic vibrational time scales. We demonstrate the two different modes of propagation in our model and show that simulations of grain growth and elasto-plastic deformation are consistent with the microstructural properties of nanocrystals.
△ Less
Submitted 26 January, 2006;
originally announced January 2006.
-
Crossover Scaling of Wavelength Selection in Directional Solidification of Binary Alloys
Authors:
Michael Greenwood,
Mikko Haataja,
Nikolas Provatas
Abstract:
We simulate dendritic growth in directional solidification in dilute binary alloys using a phase-field model solved with an adaptive-mesh refinement. The spacing of primary branches is examined for a range of thermal gradients and alloy compositions and is found to undergo a maximum as a function of pulling velocity, in agreement with experimental observations. We demonstrate that wavelength sel…
▽ More
We simulate dendritic growth in directional solidification in dilute binary alloys using a phase-field model solved with an adaptive-mesh refinement. The spacing of primary branches is examined for a range of thermal gradients and alloy compositions and is found to undergo a maximum as a function of pulling velocity, in agreement with experimental observations. We demonstrate that wavelength selection is unambiguously described by a non-trivial crossover scaling function from the emergence of cellular growth to the onset of dendritic fingers, a result validated using published experimental data.
△ Less
Submitted 20 March, 2004;
originally announced March 2004.
-
Apparent hysteresis in a driven system with self-organized drag
Authors:
Mikko Haataja,
David J. Srolovitz,
Yannis G. Kevrekidis
Abstract:
Interaction between extended defects and impurities lies at the heart of many physical phenomena in materials science. Here we revisit the ubiquitous problem of the driven motion of an extended defect in a field of mobile impurities, which self-organize to cause drag on the defect. Under a wide range of external conditions (e.g. drive), the defect undergoes a transition from slow to fast motion.…
▽ More
Interaction between extended defects and impurities lies at the heart of many physical phenomena in materials science. Here we revisit the ubiquitous problem of the driven motion of an extended defect in a field of mobile impurities, which self-organize to cause drag on the defect. Under a wide range of external conditions (e.g. drive), the defect undergoes a transition from slow to fast motion. This transition is commonly hysteretic: the defect either moves slow or fast, depending on the initial condition. We explore such hysteresis via a kinetic Monte Carlo spin simulation combined with computational coarse-graining. Obtaining bifurcation diagrams (stable and unstable branches), we map behavior regimes in parameter space. Estimating fast-slow switching times, we determine whether a simulation or experiment will exhibit hysteresis depending on observation conditions. We believe our approach is applicable to quantifying hysteresis in a wide range of physical contexts.
△ Less
Submitted 20 October, 2003;
originally announced October 2003.
-
Modeling Elasticity in Crystal Growth
Authors:
K. R. Elder,
Mark Katakowski,
Mikko Haataja,
Martin Grant
Abstract:
A new model of crystal growth is presented that describes the phenomena on atomic length and diffusive time scales. The former incorporates elastic and plastic deformation in a natural manner, and the latter enables access to times scales much larger than conventional atomic methods. The model is shown to be consistent with the predictions of Read and Shockley for grain boundary energy, and Matt…
▽ More
A new model of crystal growth is presented that describes the phenomena on atomic length and diffusive time scales. The former incorporates elastic and plastic deformation in a natural manner, and the latter enables access to times scales much larger than conventional atomic methods. The model is shown to be consistent with the predictions of Read and Shockley for grain boundary energy, and Matthews and Blakeslee for misfit dislocations in epitaxial growth.
△ Less
Submitted 18 July, 2001;
originally announced July 2001.
-
Defects, order, and hysteresis in driven charge-density waves
Authors:
Mikko Karttunen,
Mikko Haataja,
K. R. Elder,
Martin Grant
Abstract:
We model driven two-dimensional charge-density waves in random media via a modified Swift-Hohenberg equation, which includes both amplitude and phase fluctuations of the condensate. As the driving force is increased, we find that the defect density first increases and then decreases. Furthermore, we find switching phenomena, due to the formation of channels of dislocations. These results are in…
▽ More
We model driven two-dimensional charge-density waves in random media via a modified Swift-Hohenberg equation, which includes both amplitude and phase fluctuations of the condensate. As the driving force is increased, we find that the defect density first increases and then decreases. Furthermore, we find switching phenomena, due to the formation of channels of dislocations. These results are in qualitative accord with recent dynamical x-ray scattering experiments by Ringlandet al. and transport experiments by Lemay et al.
△ Less
Submitted 20 October, 1999;
originally announced October 1999.
-
Dynamics of driven interfaces near isotropic percolation transition
Authors:
M. -P. Kuittu,
M. Haataja,
N. Provatas,
T. Ala-Nissila
Abstract:
We consider the dynamics and kinetic roughening of interfaces embedded in uniformly random media near percolation treshold. In particular, we study simple discrete ``forest fire'' lattice models through Monte Carlo simulations in two and three spatial dimensions. An interface generated in the models is found to display complex behavior. Away from the percolation transition, the interface is self…
▽ More
We consider the dynamics and kinetic roughening of interfaces embedded in uniformly random media near percolation treshold. In particular, we study simple discrete ``forest fire'' lattice models through Monte Carlo simulations in two and three spatial dimensions. An interface generated in the models is found to display complex behavior. Away from the percolation transition, the interface is self-affine with asymptotic dynamics consistent with the Kardar-Parisi-Zhang universality class. However, in the vicinity of the percolation transition, there is a different behavior at earlier times. By scaling arguments we show that the global scaling exponents associated with the kinetic roughening of the interface can be obtained from the properties of the underlying percolation cluster. Our numerical results are in good agreement with theory. However, we demonstrate that at the depinning transition, the interface as defined in the models is no longer self-affine. Finally, we compare these results to those obtained from a more realistic reaction-diffusion model of slow combustion.
△ Less
Submitted 14 May, 1998;
originally announced May 1998.
-
Growth, Percolation, and Correlations in Disordered Fiber Networks
Authors:
N. Provatas,
M. Haataja,
E. Seppälä,
S. Majaniemi,
J. Åström,
M. Alava,
T. Ala-Nissila
Abstract:
This paper studies growth, percolation, and correlations in disordered fiber networks. We start by introducing a 2D continuum deposition model with effective fiber-fiber interactions represented by a parameter $p$ which controls the degree of clustering. For $p=1$, the deposited network is uniformly random, while for $p=0$ only a single connected cluster can grow. For $p=0$, we first derive the…
▽ More
This paper studies growth, percolation, and correlations in disordered fiber networks. We start by introducing a 2D continuum deposition model with effective fiber-fiber interactions represented by a parameter $p$ which controls the degree of clustering. For $p=1$, the deposited network is uniformly random, while for $p=0$ only a single connected cluster can grow. For $p=0$, we first derive the growth law for the average size of the cluster as well as a formula for its mass density profile. For $p>0$, we carry out extensive simulations on fibers, and also needles and disks to study the dependence of the percolation threshold on $p$. We also derive a mean-field theory for the threshold near $p=0$ and $p=1$ and find good qualitative agreement with the simulations. The fiber networks produced by the model display nontrivial density correlations for $p<1$. We study these by deriving an approximate expression for the pair distribution function of the model that reduces to the exactly known case of a uniformly random network. We also show that the two-point mass density correlation function of the model has a nontrivial form, and discuss our results in view of recent experimental data on mass density correlations in paper sheets.
△ Less
Submitted 6 November, 1996;
originally announced November 1996.
-
Dynamics of Spreading of Chainlike Molecules with Asymmetric Surface Interactions
Authors:
M. Haataja,
J. A. Nieminen,
T. Ala-Nissila
Abstract:
In this work we study the spreading dynamics of tiny liquid droplets on solid surfaces in the case where the ends of the molecules feel different interactions with respect to the surface. We consider a simple model of dimers and short chainlike molecules that cannot form chemical bonds with the surface. We use constant temperature Molecular Dynamics techniques to examine in detail the microscopi…
▽ More
In this work we study the spreading dynamics of tiny liquid droplets on solid surfaces in the case where the ends of the molecules feel different interactions with respect to the surface. We consider a simple model of dimers and short chainlike molecules that cannot form chemical bonds with the surface. We use constant temperature Molecular Dynamics techniques to examine in detail the microscopic structure of the time dependent precursor film. We find that in some cases it can exhibit a high degree of local order that can persist even for flexible chains. Our model also reproduces the experimentally observed early and late-time spreading regimes where the radius of the film grows proportional to the square root of time. The ratios of the associated transport coefficients are in good overall agreement with experiments. Our density profiles are also in good agreement with measurements on the spreading of molecules on hydrophobic surfaces.
△ Less
Submitted 6 March, 1996;
originally announced March 1996.
-
Molecular ordering of precursor films during spreading of tiny liquid droplets
Authors:
M. Haataja,
J. A. Nieminen,
T. Ala-Nissila
Abstract:
In this work we address a novel feature of spreading dynamics of tiny liquid droplets on solid surfaces, namely the case where the ends of the molecules feel different interactions to the surface. We consider a simple model of dimers and short chain--like molecules which cannot form chemical bonds with the surface. We study the spreading dynamics by Molecular Dynamics techniques. In particular,…
▽ More
In this work we address a novel feature of spreading dynamics of tiny liquid droplets on solid surfaces, namely the case where the ends of the molecules feel different interactions to the surface. We consider a simple model of dimers and short chain--like molecules which cannot form chemical bonds with the surface. We study the spreading dynamics by Molecular Dynamics techniques. In particular, we examine the microscopic structure of the time--dependent precursor film and find that in some cases it can exhibit a high degree of local order. This order persists even for flexible chains. Our results suggest the possibility of extracting information about molecular interactions from the structure of the precursor film.
△ Less
Submitted 7 August, 1995;
originally announced August 1995.