-
Forbush decrease observed by SEVAN particle detector network on November 4, 2021
Authors:
A. Chilingarian,
G. Hovsepyan,
H. Martoyan,
T. Karapetyan,
B. Sargsyan,
N. Nokolova,
H. Angelov,
D. Haas,
J. Knapp,
M. Walter,
O. Ploc,
J. Shlegl,
M. Kakona,
I. Ambrosova
Abstract:
On November 3-4 2021, an interplanetary coronal mass injection (ICME) hits the magnetosphere, sparking a strong G3-class geomagnetic storm and auroras as far south as California and New Mexico. All detectors of the SEVAN network registered a Forbush decrease (FD) of 5-10 percentdeep in 1 minute time series of count rates. We present the results of a comparison of Fd registered on mountain altitude…
▽ More
On November 3-4 2021, an interplanetary coronal mass injection (ICME) hits the magnetosphere, sparking a strong G3-class geomagnetic storm and auroras as far south as California and New Mexico. All detectors of the SEVAN network registered a Forbush decrease (FD) of 5-10 percentdeep in 1 minute time series of count rates. We present the results of a comparison of Fd registered on mountain altitudes on Aragats (Armenia), Lomnicky Stit (Slovakia), Musala (Bulgaria), and at sea level DESY (Hamburg, Germany), and in Mileshovka, Czechia. We present as well purity and barometric coefficients of different coincidences of SEVAN detector layers on Aragats. We demonstrate disturbances of the near-surface electric (NSEF) and geomagnetic fields at the arrival of the ICME on Earth.
△ Less
Submitted 27 December, 2022;
originally announced December 2022.
-
Adversarial Training for High-Stakes Reliability
Authors:
Daniel M. Ziegler,
Seraphina Nix,
Lawrence Chan,
Tim Bauman,
Peter Schmidt-Nielsen,
Tao Lin,
Adam Scherlis,
Noa Nabeshima,
Ben Weinstein-Raun,
Daniel de Haas,
Buck Shlegeris,
Nate Thomas
Abstract:
In the future, powerful AI systems may be deployed in high-stakes settings, where a single failure could be catastrophic. One technique for improving AI safety in high-stakes settings is adversarial training, which uses an adversary to generate examples to train on in order to achieve better worst-case performance.
In this work, we used a safe language generation task (``avoid injuries'') as a t…
▽ More
In the future, powerful AI systems may be deployed in high-stakes settings, where a single failure could be catastrophic. One technique for improving AI safety in high-stakes settings is adversarial training, which uses an adversary to generate examples to train on in order to achieve better worst-case performance.
In this work, we used a safe language generation task (``avoid injuries'') as a testbed for achieving high reliability through adversarial training. We created a series of adversarial training techniques -- including a tool that assists human adversaries -- to find and eliminate failures in a classifier that filters text completions suggested by a generator. In our task, we determined that we can set very conservative classifier thresholds without significantly impacting the quality of the filtered outputs. We found that adversarial training increased robustness to the adversarial attacks that we trained on -- doubling the time for our contractors to find adversarial examples both with our tool (from 13 to 26 minutes) and without (from 20 to 44 minutes) -- without affecting in-distribution performance.
We hope to see further work in the high-stakes reliability setting, including more powerful tools for enhancing human adversaries and better ways to measure high levels of reliability, until we can confidently rule out the possibility of catastrophic deployment-time failures of powerful models.
△ Less
Submitted 9 November, 2022; v1 submitted 3 May, 2022;
originally announced May 2022.
-
Explaining Deep Tractable Probabilistic Models: The sum-product network case
Authors:
Athresh Karanam,
Saurabh Mathur,
Predrag Radivojac,
David M. Haas,
Kristian Kersting,
Sriraam Natarajan
Abstract:
We consider the problem of explaining a class of tractable deep probabilistic models, the Sum-Product Networks (SPNs) and present an algorithm ExSPN to generate explanations. To this effect, we define the notion of a context-specific independence tree(CSI-tree) and present an iterative algorithm that converts an SPN to a CSI-tree. The resulting CSI-tree is both interpretable and explainable to the…
▽ More
We consider the problem of explaining a class of tractable deep probabilistic models, the Sum-Product Networks (SPNs) and present an algorithm ExSPN to generate explanations. To this effect, we define the notion of a context-specific independence tree(CSI-tree) and present an iterative algorithm that converts an SPN to a CSI-tree. The resulting CSI-tree is both interpretable and explainable to the domain expert. We achieve this by extracting the conditional independencies encoded by the SPN and approximating the local context specified by the structure of the SPN. Our extensive empirical evaluations on synthetic, standard, and real-world clinical data sets demonstrate that the CSI-tree exhibits superior explainability.
△ Less
Submitted 21 September, 2022; v1 submitted 19 October, 2021;
originally announced October 2021.
-
EUDAQ $-$ A Data Acquisition Software Framework for Common Beam Telescopes
Authors:
P. Ahlburg,
S. Arfaoui,
J. -H. Arling,
H. Augustin,
D. Barney,
M. Benoit,
T. Bisanz,
E. Corrin,
D. Cussans,
D. Dannheim,
J. Dreyling-Eschweiler,
T. Eichhorn,
A. Fiergolski,
I. -M. Gregor,
J. Grosse-Knetter,
D. Haas,
L. Huth,
A. Irles,
H. Jansen,
J. Janssen,
M. Keil,
J. S. Keller,
M. Kiehn,
H. J. Kim,
J. Kroll
, et al. (32 additional authors not shown)
Abstract:
EUDAQ is a generic data acquisition software developed for use in conjunction with common beam telescopes at charged particle beam lines. Providing high-precision reference tracks for performance studies of new sensors, beam telescopes are essential for the research and development towards future detectors for high-energy physics. As beam time is a highly limited resource, EUDAQ has been designed…
▽ More
EUDAQ is a generic data acquisition software developed for use in conjunction with common beam telescopes at charged particle beam lines. Providing high-precision reference tracks for performance studies of new sensors, beam telescopes are essential for the research and development towards future detectors for high-energy physics. As beam time is a highly limited resource, EUDAQ has been designed with reliability and ease-of-use in mind. It enables flexible integration of different independent devices under test via their specific data acquisition systems into a top-level framework. EUDAQ controls all components globally, handles the data flow centrally and synchronises and records the data streams. Over the past decade, EUDAQ has been deployed as part of a wide range of successful test beam campaigns and detector development applications.
△ Less
Submitted 18 November, 2019; v1 submitted 30 September, 2019;
originally announced September 2019.
-
Long-term trap** of cold polar molecules
Authors:
Dominik Haas,
Claudio von Planta,
Thomas Kierspel,
Dongdong Zhang,
Stefan Willitsch
Abstract:
We demonstrate the long-term ($<$ 1 minute) trap** of Stark-decelerated OH radicals in their $X~^{2}Π_{3/2}~(ν= 0,~J = 3/2,~M_{J} = 3/2,~f)$ state in a permanent magnetic trap. The trap environment was cryogenically cooled to a temperature of 17 K in order to efficiently suppress black-body-radiation-induced pum** of the molecules out of trappable quantum states and collisions with residual ba…
▽ More
We demonstrate the long-term ($<$ 1 minute) trap** of Stark-decelerated OH radicals in their $X~^{2}Π_{3/2}~(ν= 0,~J = 3/2,~M_{J} = 3/2,~f)$ state in a permanent magnetic trap. The trap environment was cryogenically cooled to a temperature of 17 K in order to efficiently suppress black-body-radiation-induced pum** of the molecules out of trappable quantum states and collisions with residual background gas molecules which usually limit the trap lifetimes. The cold molecules were kept confined on timescales approaching minutes, an improvement of up to two orders of magnitude compared to room-temperature experiments, at translational temperatures on the order of 25 mK. The present results pave the way for spectroscopic studies of trapped molecules with long interaction times enabling high precision, for investigations of cold collisions and reactions with very small reaction rates, for new avenues for the production of ultracold molecules via sympathetic cooling and for the realisation of new forms of hybrid matter with co-trapped atoms or ions.
△ Less
Submitted 2 August, 2019; v1 submitted 1 April, 2019;
originally announced April 2019.
-
On the $^{12}$C/$^{13}$C carbon isotope effect in the quasi one-dimensional superconductor Sc$_3$CoC$_4$
Authors:
Christof D. Haas,
Georg Eickerling,
Ernst-Wilhelm Scheidt,
Dominik Schmitz,
Jan Langmann,
Jian Lyu,
Junying Shen,
Rolf Lortz,
Daniel Eklöf,
Jan Gerrit Schiffmann,
Leo van Wüllen,
Anton Jesche,
Wolfgang Scherer
Abstract:
Sc$_3$CoC$_4$ is the only superconductor in the group of the isotypic carbides Sc$_3M$C$_4$ ($M$ = Mn, Fe, Ru, Os, Co, Rh, Ir, Ni), rendering it into an ideal benchmark system to systematically study the prerequisites and mechanism of superconductivity in such quasi one-dimensional structures. To investigate the isotope effect, the substitution series Sc$_3$Co($^{12}$C$_{1-x}$$^{13}$C$_x$)$_4$ wit…
▽ More
Sc$_3$CoC$_4$ is the only superconductor in the group of the isotypic carbides Sc$_3M$C$_4$ ($M$ = Mn, Fe, Ru, Os, Co, Rh, Ir, Ni), rendering it into an ideal benchmark system to systematically study the prerequisites and mechanism of superconductivity in such quasi one-dimensional structures. To investigate the isotope effect, the substitution series Sc$_3$Co($^{12}$C$_{1-x}$$^{13}$C$_x$)$_4$ with $x$ = 0, 0.5 and 1 was synthesized by arc melting. The sample homogeneity was confirmed by powder X-ray diffraction and NMR spectroscopy. The resulting isotope coefficient based on magnetization studies on polycrystalline samples and electrical resistivity measurements on single crystals of $α$ = 0.58 lies close to the value of 0.5 predicted by BCS theory.
△ Less
Submitted 9 November, 2018; v1 submitted 15 December, 2017;
originally announced December 2017.
-
Optimising the multiplex factor of the frequency domain multiplexed readout of the TES-based microcalorimeter imaging array for the X-IFU instrument on the Athena Xray observatory
Authors:
J. van der Kuur,
L. G. Gottardi,
H. Akamatsu,
B. J. van Leeuwen,
R. den Hartog,
D. Haas,
M. Kiviranta,
B. J. Jackson
Abstract:
Athena is a space-based X-ray observatory intended for exploration of the hot and energetic universe. One of the science instruments on Athena will be the X-ray Integrated Field Unit (X-IFU), which is a cryogenic X-ray spectrometer, based on a large cryogenic imaging array of Transition Edge Sensors (TES) based microcalorimeters operating at a temperature of 100mK. The imaging array consists of 38…
▽ More
Athena is a space-based X-ray observatory intended for exploration of the hot and energetic universe. One of the science instruments on Athena will be the X-ray Integrated Field Unit (X-IFU), which is a cryogenic X-ray spectrometer, based on a large cryogenic imaging array of Transition Edge Sensors (TES) based microcalorimeters operating at a temperature of 100mK. The imaging array consists of 3800 pixels providing 2.5 eV spectral resolution, and covers a field of view with a diameter of of 5 arc minutes. Multiplexed readout of the cryogenic microcalorimeter array is essential to comply with the cooling power and complexity constraints on a space craft. Frequency domain multiplexing has been under development for the readout of TES-based detectors for this purpose, not only for the X-IFU detector arrays but also for TES-based bolometer arrays for the Safari instrument of the Japanese SPICA observatory. This paper discusses the design considerations which are applicable to optimise the multiplex factor within the boundary conditions as set by the space craft. More specifically, the interplay between the science requirements such as pixel dynamic range, pixel speed, and cross talk, and the space craft requirements such as the power dissipation budget, available bandwidth, and electromagnetic compatibility will be discussed.
△ Less
Submitted 16 November, 2016;
originally announced November 2016.
-
Performance of the EUDET-type beam telescopes
Authors:
H. Jansen,
S. Spannagel,
J. Behr,
A. Bulgheroni,
G. Claus,
E. Corrin,
D. G. Cussans,
J. Dreyling-Eschweiler,
D. Eckstein,
T. Eichhorn,
M. Goffe,
I. M. Gregor,
D. Haas,
C. Muhl,
H. Perrey,
R. Peschke,
P. Roloff,
I. Rubinskiy,
M. Winter
Abstract:
Test beam measurements at the test beam facilities of DESY have been conducted to characterise the performance of the EUDET-type beam telescopes originally developed within the EUDET project. The beam telescopes are equipped with six sensor planes using MIMOSA26 monolithic active pixel devices. A programmable Trigger Logic Unit provides trigger logic and time stamp information on particle passage.…
▽ More
Test beam measurements at the test beam facilities of DESY have been conducted to characterise the performance of the EUDET-type beam telescopes originally developed within the EUDET project. The beam telescopes are equipped with six sensor planes using MIMOSA26 monolithic active pixel devices. A programmable Trigger Logic Unit provides trigger logic and time stamp information on particle passage. Both data acquisition framework and offline reconstruction software packages are available. User devices are easily integrable into the data acquisition framework via predefined interfaces.
The biased residual distribution is studied as a function of the beam energy, plane spacing and sensor threshold. Its standard deviation at the two centre pixel planes using all six planes for tracking in a 6\,GeV electron/positron-beam is measured to be $(2.88\,\pm\,0.08)\,\upmu\meter$.Iterative track fits using the formalism of General Broken Lines are performed to estimate the intrinsic resolution of the individual pixel planes. The mean intrinsic resolution over the six sensors used is found to be $(3.24\,\pm\,0.09)\,\upmu\meter$.With a 5\,GeV electron/positron beam, the track resolution halfway between the two inner pixel planes using an equidistant plane spacing of 20\,mm is estimated to $(1.83\,\pm\,0.03)\,\upmu\meter$ assuming the measured intrinsic resolution. Towards lower beam energies the track resolution deteriorates due to increasing multiple scattering. Threshold studies show an optimal working point of the MIMOSA26 sensors at a sensor threshold of between five and six times their RMS noise. Measurements at different plane spacings are used to calibrate the amount of multiple scattering in the material traversed and allow for corrections to the predicted angular scattering for electron beams.
△ Less
Submitted 10 May, 2016; v1 submitted 31 March, 2016;
originally announced March 2016.
-
On the Detection of Mixture Distributions with applications to the Most Biased Coin Problem
Authors:
Kevin Jamieson,
Daniel Haas,
Ben Recht
Abstract:
This paper studies the trade-off between two different kinds of pure exploration: breadth versus depth. The most biased coin problem asks how many total coin flips are required to identify a "heavy" coin from an infinite bag containing both "heavy" coins with mean $θ_1 \in (0,1)$, and "light" coins with mean $θ_0 \in (0,θ_1)$, where heavy coins are drawn from the bag with probability…
▽ More
This paper studies the trade-off between two different kinds of pure exploration: breadth versus depth. The most biased coin problem asks how many total coin flips are required to identify a "heavy" coin from an infinite bag containing both "heavy" coins with mean $θ_1 \in (0,1)$, and "light" coins with mean $θ_0 \in (0,θ_1)$, where heavy coins are drawn from the bag with probability $α\in (0,1/2)$. The key difficulty of this problem lies in distinguishing whether the two kinds of coins have very similar means, or whether heavy coins are just extremely rare. This problem has applications in crowdsourcing, anomaly detection, and radio spectrum search. Chandrasekaran et. al. (2014) recently introduced a solution to this problem but it required perfect knowledge of $θ_0,θ_1,α$. In contrast, we derive algorithms that are adaptive to partial or absent knowledge of the problem parameters. Moreover, our techniques generalize beyond coins to more general instances of infinitely many armed bandit problems. We also prove lower bounds that show our algorithm's upper bounds are tight up to $\log$ factors, and on the way characterize the sample complexity of differentiating between a single parametric distribution and a mixture of two such distributions. As a result, these bounds have surprising implications both for solutions to the most biased coin problem and for anomaly detection when only partial information about the parameters is known.
△ Less
Submitted 25 March, 2016;
originally announced March 2016.
-
Development of a low-level Ar-37 calibration standard
Authors:
R. M. Williams,
C. E. Aalseth,
T. W. Bowyer,
A. R. Day,
E. S. Fuller,
D. A. Haas,
J. C. Hayes,
E. W. Hoppe,
P. H. Humble,
M. E. Keillor,
B. D. LaFerriere,
E. K. Mace,
J. I. McIntyre,
H. S. Miley,
A. W. Myers,
J. L. Orrell,
C. T. Overman,
M. E. Panisko,
A. Seifert
Abstract:
Argon-37 is an environmental signature of an underground nuclear explosion. Producing and quantifying low-level Ar-37 standards is an important step in the development of sensitive field measurement instruments. This paper describes progress at Pacific Northwest National Laboratory in develo** a process to generate and quantify low-level Ar-37 standards, which can be used to calibrate sensitive…
▽ More
Argon-37 is an environmental signature of an underground nuclear explosion. Producing and quantifying low-level Ar-37 standards is an important step in the development of sensitive field measurement instruments. This paper describes progress at Pacific Northwest National Laboratory in develo** a process to generate and quantify low-level Ar-37 standards, which can be used to calibrate sensitive field systems at activities consistent with soil background levels. This paper presents a discussion of the measurement analysis, along with assumptions and uncertainty estimates.
△ Less
Submitted 4 March, 2016;
originally announced March 2016.
-
CLAMShell: Speeding up Crowds for Low-latency Data Labeling
Authors:
Daniel Haas,
Jiannan Wang,
Eugene Wu,
Michael J. Franklin
Abstract:
Data labeling is a necessary but often slow process that impedes the development of interactive systems for modern data analysis. Despite rising demand for manual data labeling, there is a surprising lack of work addressing its high and unpredictable latency. In this paper, we introduce CLAMShell, a system that speeds up crowds in order to achieve consistently low-latency data labeling. We offer a…
▽ More
Data labeling is a necessary but often slow process that impedes the development of interactive systems for modern data analysis. Despite rising demand for manual data labeling, there is a surprising lack of work addressing its high and unpredictable latency. In this paper, we introduce CLAMShell, a system that speeds up crowds in order to achieve consistently low-latency data labeling. We offer a taxonomy of the sources of labeling latency and study several large crowd-sourced labeling deployments to understand their empirical latency profiles. Driven by these insights, we comprehensively tackle each source of latency, both by develo** novel techniques such as straggler mitigation and pool maintenance and by optimizing existing methods such as crowd retainer pools and active learning. We evaluate CLAMShell in simulation and on live workers on Amazon's Mechanical Turk, demonstrating that our techniques can provide an order of magnitude speedup and variance reduction over existing crowdsourced labeling strategies.
△ Less
Submitted 20 September, 2015;
originally announced September 2015.
-
The ASTRO-H X-ray Astronomy Satellite
Authors:
Tadayuki Takahashi,
Kazuhisa Mitsuda,
Richard Kelley,
Felix Aharonian,
Hiroki Akamatsu,
Fumie Akimoto,
Steve Allen,
Naohisa Anabuki,
Lorella Angelini,
Keith Arnaud,
Makoto Asai,
Marc Audard,
Hisamitsu Awaki,
Philipp Azzarello,
Chris Baluta,
Aya Bamba,
Nobutaka Bando,
Marshall Bautz,
Thomas Bialas,
Roger Blandford,
Kevin Boyce,
Laura Brenneman,
Greg Brown,
Edward Cackett,
Edgar Canavan
, et al. (228 additional authors not shown)
Abstract:
The joint JAXA/NASA ASTRO-H mission is the sixth in a series of highly successful X-ray missions developed by the Institute of Space and Astronautical Science (ISAS), with a planned launch in 2015. The ASTRO-H mission is equipped with a suite of sensitive instruments with the highest energy resolution ever achieved at E > 3 keV and a wide energy range spanning four decades in energy from soft X-ra…
▽ More
The joint JAXA/NASA ASTRO-H mission is the sixth in a series of highly successful X-ray missions developed by the Institute of Space and Astronautical Science (ISAS), with a planned launch in 2015. The ASTRO-H mission is equipped with a suite of sensitive instruments with the highest energy resolution ever achieved at E > 3 keV and a wide energy range spanning four decades in energy from soft X-rays to gamma-rays. The simultaneous broad band pass, coupled with the high spectral resolution of Delta E < 7 eV of the micro-calorimeter, will enable a wide variety of important science themes to be pursued. ASTRO-H is expected to provide breakthrough results in scientific areas as diverse as the large-scale structure of the Universe and its evolution, the behavior of matter in the gravitational strong field regime, the physical conditions in sites of cosmic-ray acceleration, and the distribution of dark matter in galaxy clusters at different redshifts.
△ Less
Submitted 3 December, 2014;
originally announced December 2014.
-
Detecting People in Cubist Art
Authors:
Shiry Ginosar,
Daniel Haas,
Timothy Brown,
Jitendra Malik
Abstract:
Although the human visual system is surprisingly robust to extreme distortion when recognizing objects, most evaluations of computer object detection methods focus only on robustness to natural form deformations such as people's pose changes. To determine whether algorithms truly mirror the flexibility of human vision, they must be compared against human vision at its limits. For example, in Cubis…
▽ More
Although the human visual system is surprisingly robust to extreme distortion when recognizing objects, most evaluations of computer object detection methods focus only on robustness to natural form deformations such as people's pose changes. To determine whether algorithms truly mirror the flexibility of human vision, they must be compared against human vision at its limits. For example, in Cubist abstract art, painted objects are distorted by object fragmentation and part-reorganization, to the point that human vision often fails to recognize them. In this paper, we evaluate existing object detection methods on these abstract renditions of objects, comparing human annotators to four state-of-the-art object detectors on a corpus of Picasso paintings. Our results demonstrate that while human perception significantly outperforms current methods, human perception and part-based models exhibit a similarly graceful degradation in object detection performance as the objects become increasingly abstract and fragmented, corroborating the theory of part-based object representation in the brain.
△ Less
Submitted 22 September, 2014;
originally announced September 2014.
-
The Large Observatory For x-ray Timing
Authors:
M. Feroci,
J. W. den Herder,
E. Bozzo,
D. Barret,
S. Brandt,
M. Hernanz,
M. van der Klis,
M. Pohl,
A. Santangelo,
L. Stella,
A. Watts,
J. Wilms,
S. Zane,
M. Ahangarianabhari,
C. Albertus,
M. Alford,
A. Alpar,
D. Altamirano,
L. Alvarez,
L. Amati,
C. Amoros,
N. Andersson,
A. Antonelli,
A. Argan,
R. Artigue
, et al. (320 additional authors not shown)
Abstract:
The Large Observatory For x-ray Timing (LOFT) was studied within ESA M3 Cosmic Vision framework and participated in the final down-selection for a launch slot in 2022-2024. Thanks to the unprecedented combination of effective area and spectral resolution of its main instrument, LOFT will study the behaviour of matter under extreme conditions, such as the strong gravitational field in the innermost…
▽ More
The Large Observatory For x-ray Timing (LOFT) was studied within ESA M3 Cosmic Vision framework and participated in the final down-selection for a launch slot in 2022-2024. Thanks to the unprecedented combination of effective area and spectral resolution of its main instrument, LOFT will study the behaviour of matter under extreme conditions, such as the strong gravitational field in the innermost regions of accretion flows close to black holes and neutron stars, and the supra-nuclear densities in the interior of neutron stars. The science payload is based on a Large Area Detector (LAD, 10 m 2 effective area, 2-30 keV, 240 eV spectral resolution, 1 deg collimated field of view) and a WideField Monitor (WFM, 2-50 keV, 4 steradian field of view, 1 arcmin source location accuracy, 300 eV spectral resolution). The WFM is equipped with an on-board system for bright events (e.g. GRB) localization. The trigger time and position of these events are broadcast to the ground within 30 s from discovery. In this paper we present the status of the mission at the end of its Phase A study.
△ Less
Submitted 29 August, 2014; v1 submitted 27 August, 2014;
originally announced August 2014.
-
The ASTRO-H X-ray Observatory
Authors:
Tadayuki Takahashi,
Kazuhisa Mitsuda,
Richard Kelley,
Henri AartsFelix Aharonian,
Hiroki Akamatsu,
Fumie Akimoto,
Steve Allen,
Naohisa Anabuki,
Lorella Angelini,
Keith Arnaud,
Makoto Asai,
Marc Audard,
Hisamitsu Awaki,
Philipp Azzarello,
Chris Baluta,
Aya Bamba,
Nobutaka Bando,
Mark Bautz,
Roger Blandford,
Kevin Boyce,
Greg Brown,
Ed Cackett,
Maria Chernyakova,
Paolo Coppi,
Elisa Costantini
, et al. (198 additional authors not shown)
Abstract:
The joint JAXA/NASA ASTRO-H mission is the sixth in a series of highly successful X-ray missions initiated by the Institute of Space and Astronautical Science (ISAS). ASTRO-H will investigate the physics of the high-energy universe via a suite of four instruments, covering a very wide energy range, from 0.3 keV to 600 keV. These instruments include a high-resolution, high-throughput spectrometer s…
▽ More
The joint JAXA/NASA ASTRO-H mission is the sixth in a series of highly successful X-ray missions initiated by the Institute of Space and Astronautical Science (ISAS). ASTRO-H will investigate the physics of the high-energy universe via a suite of four instruments, covering a very wide energy range, from 0.3 keV to 600 keV. These instruments include a high-resolution, high-throughput spectrometer sensitive over 0.3-2 keV with high spectral resolution of Delta E < 7 eV, enabled by a micro-calorimeter array located in the focal plane of thin-foil X-ray optics; hard X-ray imaging spectrometers covering 5-80 keV, located in the focal plane of multilayer-coated, focusing hard X-ray mirrors; a wide-field imaging spectrometer sensitive over 0.4-12 keV, with an X-ray CCD camera in the focal plane of a soft X-ray telescope; and a non-focusing Compton-camera type soft gamma-ray detector, sensitive in the 40-600 keV band. The simultaneous broad bandpass, coupled with high spectral resolution, will enable the pursuit of a wide variety of important science themes.
△ Less
Submitted 16 October, 2012;
originally announced October 2012.
-
LOFT: the Large Observatory For X-ray Timing
Authors:
M. Feroci,
J. W. den Herder,
E. Bozzo,
D. Barret,
S. Brandt,
M. Hernanz,
M. van der Klis,
M. Pohl,
A. Santangelo,
L. Stella,
A. Watts,
J. Wilms,
S. Zane,
M. Ahangarianabhari,
A. Alpar,
D. Altamirano,
L. Alvarez,
L. Amati,
C. Amoros,
N. Andersson,
A. Antonelli,
A. Argan,
R. Artigue,
P. Azzarello,
G. Baldazzi
, et al. (223 additional authors not shown)
Abstract:
The LOFT mission concept is one of four candidates selected by ESA for the M3 launch opportunity as Medium Size missions of the Cosmic Vision programme. The launch window is currently planned for between 2022 and 2024. LOFT is designed to exploit the diagnostics of rapid X-ray flux and spectral variability that directly probe the motion of matter down to distances very close to black holes and neu…
▽ More
The LOFT mission concept is one of four candidates selected by ESA for the M3 launch opportunity as Medium Size missions of the Cosmic Vision programme. The launch window is currently planned for between 2022 and 2024. LOFT is designed to exploit the diagnostics of rapid X-ray flux and spectral variability that directly probe the motion of matter down to distances very close to black holes and neutron stars, as well as the physical state of ultra-dense matter. These primary science goals will be addressed by a payload composed of a Large Area Detector (LAD) and a Wide Field Monitor (WFM). The LAD is a collimated (<1 degree field of view) experiment operating in the energy range 2-50 keV, with a 10 m^2 peak effective area and an energy resolution of 260 eV at 6 keV. The WFM will operate in the same energy range as the LAD, enabling simultaneous monitoring of a few-steradian wide field of view, with an angular resolution of <5 arcmin. The LAD and WFM experiments will allow us to investigate variability from submillisecond QPO's to year-long transient outbursts. In this paper we report the current status of the project.
△ Less
Submitted 7 September, 2012;
originally announced September 2012.
-
Infrastructure for Detector Research and Development towards the International Linear Collider
Authors:
J. Aguilar,
P. Ambalathankandy,
T. Fiutowski,
M. Idzik,
Sz. Kulis,
D. Przyborowski,
K. Swientek,
A. Bamberger,
M. Köhli,
M. Lupberger,
U. Renz,
M. Schumacher,
Andreas Zwerger,
A. Calderone,
D. G. Cussans,
H. F. Heath,
S. Mandry,
R. F. Page,
J. J. Velthuis,
D. Attié,
D. Calvet,
P. Colas,
X. Coppolani,
Y. Degerli,
E. Delagnes
, et al. (252 additional authors not shown)
Abstract:
The EUDET-project was launched to create an infrastructure for develo** and testing new and advanced detector technologies to be used at a future linear collider. The aim was to make possible experimentation and analysis of data for institutes, which otherwise could not be realized due to lack of resources. The infrastructure comprised an analysis and software network, and instrumentation infras…
▽ More
The EUDET-project was launched to create an infrastructure for develo** and testing new and advanced detector technologies to be used at a future linear collider. The aim was to make possible experimentation and analysis of data for institutes, which otherwise could not be realized due to lack of resources. The infrastructure comprised an analysis and software network, and instrumentation infrastructures for tracking detectors as well as for calorimetry.
△ Less
Submitted 23 January, 2012;
originally announced January 2012.
-
Abnormality of the placental vasculature affects placental thickness
Authors:
Michael Yampolsky,
Carolyn M. Salafia,
Oleksandr Shlakhter,
Danielle Haas,
Barbara Eucker,
John Thorp
Abstract:
Our empirical modeling suggests that deformation of placental vascular growth is associated with abnormal placental chorionic surface shape. Altered chorionic surface shape is associated with lowered placental functional efficiency. We hypothesize that placentas with deformed chorionic surface vascular trees and reduced functional efficiency also have irregular vascular arborization that will be r…
▽ More
Our empirical modeling suggests that deformation of placental vascular growth is associated with abnormal placental chorionic surface shape. Altered chorionic surface shape is associated with lowered placental functional efficiency. We hypothesize that placentas with deformed chorionic surface vascular trees and reduced functional efficiency also have irregular vascular arborization that will be reflected in increased variability of placental thickness and a lower mean thickness.
We find that non-centrality of the umbilical cord insertion is strongly and significantly correlated with disk thickness (Spearman's rho=0.128, p=0.002). Deformed shape is strongly and significantly associated with lower overall thickness and higher variability of thickness with beta between -0.173 and -0.254 (p<0.001) . Both lower mean thickness and high variability of thickness are strongly correlated with higher beta (reduced placental efficiency) (p<0.001 and p=0.038 respectively). Greater thickness variability is correlated with higher beta independent of the other placental shape variables p=0.004.
△ Less
Submitted 10 January, 2011;
originally announced January 2011.
-
A method to localize gamma-ray bursts using POLAR
Authors:
E. Suarez-Garcia,
D. Haas,
W. Hajdas,
G. Lamanna,
C. Lechanoine-Leluc,
R. Marcinkowski,
A. Mtchedlishvili,
S. Orsi,
M. Pohl,
N. Produit,
D. Rapin,
D. Rybka,
J. -P. Vialle
Abstract:
The hard X-ray polarimeter POLAR aims to measure the linear polarization of the 50-500 keV photons arriving from the prompt emission of gamma-ray bursts (GRBs). The position in the sky of the detected GRBs is needed to determine their level of polarization. We present here a method by which, despite of the polarimeter incapability of taking images, GRBs can be roughly localized using POLAR alone.…
▽ More
The hard X-ray polarimeter POLAR aims to measure the linear polarization of the 50-500 keV photons arriving from the prompt emission of gamma-ray bursts (GRBs). The position in the sky of the detected GRBs is needed to determine their level of polarization. We present here a method by which, despite of the polarimeter incapability of taking images, GRBs can be roughly localized using POLAR alone. For this purpose scalers are attached to the output of the 25 multi-anode photomultipliers (MAPMs) that collect the light from the POLAR scintillator target. Each scaler measures how many GRB photons produce at least one energy deposition above 50 keV in the corresponding MAPM. Simulations show that the relative outputs of the 25 scalers depend on the GRB position. A database of very strong GRBs simulated at 10201 positions has been produced. When a GRB is detected, its location is calculated searching the minimum of the chi2 obtained in the comparison between the measured scaler pattern and the database. This GRB localization technique brings enough accuracy so that the error transmitted to the 100% modulation factor is kept below 10% for GRBs with fluence Ftot \geq 10^(-5) erg cm^(-2) . The POLAR localization capability will be useful for those cases where no other instruments are simultaneously observing the same field of view.
△ Less
Submitted 16 November, 2010;
originally announced November 2010.
-
Measurement of 37Ar to support technology for On-site Inspection under the Comprehensive Nuclear-Test-Ban Treaty
Authors:
C. E. Aalseth,
A. R. Day,
D. A. Haas,
E. W. Hoppe,
B. J. Hyronimus,
M. E. Keillor,
E. K. Mace,
J. L. Orrell,
A. Seifert,
V. T. Woods
Abstract:
On-Site Inspection (OSI) is a key component of the verification regime for the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Measurements of radionuclide isotopes created by an underground nuclear explosion are a valuable signature of a Treaty violation. Argon-37 is produced from neutron interaction with calcium in soil, 40Ca(n,α)37Ar. For OSI, the 35-day half-life of 37Ar provides both high speci…
▽ More
On-Site Inspection (OSI) is a key component of the verification regime for the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Measurements of radionuclide isotopes created by an underground nuclear explosion are a valuable signature of a Treaty violation. Argon-37 is produced from neutron interaction with calcium in soil, 40Ca(n,α)37Ar. For OSI, the 35-day half-life of 37Ar provides both high specific activity and sufficient time for completion of an inspection before decay limits sensitivity. This paper presents a low-background internal-source gas proportional counter with an 37Ar measurement sensitivity level equivalent to 45.1 mBq/SCM in whole air.
△ Less
Submitted 4 August, 2010;
originally announced August 2010.
-
Mean surface shape of a human placenta
Authors:
Michael Yampolsky,
Oleksandr Shlakhter,
Carolyn M. Salafia,
Danielle Haas
Abstract:
The chorionic plate (or "fetal surface") of the human placenta is drawn as round, with the umbilical cord inserted roughly at the center, but variability of this shape is common. The average shape of the chorionic plate has never been established. The goal of this work is to measure the average shape in a birth cohort.
The chorionic plate (or "fetal surface") of the human placenta is drawn as round, with the umbilical cord inserted roughly at the center, but variability of this shape is common. The average shape of the chorionic plate has never been established. The goal of this work is to measure the average shape in a birth cohort.
△ Less
Submitted 18 July, 2008;
originally announced July 2008.
-
Modeling the variability of shapes of a human placenta
Authors:
Michael Yampolsky,
Carolyn M. Salafia,
Oleksandr Shlakhter,
Danielle Haas,
Barbara Eucker,
John Thorp
Abstract:
While it is well-understood what a normal human placenta should look like, a deviation from the norm can take many possible shapes. In this paper we propose a mechanism for this variability based on the change in the structure of the vascular tree.
While it is well-understood what a normal human placenta should look like, a deviation from the norm can take many possible shapes. In this paper we propose a mechanism for this variability based on the change in the structure of the vascular tree.
△ Less
Submitted 3 January, 2008; v1 submitted 5 November, 2007;
originally announced November 2007.
-
Hadronic Structure Functions of the Photon Measured at LEP
Authors:
Richard Nisius,
Daniel Haas,
Claus Grupen
Abstract:
The measurements of hadronic structure functions of the photon based on the reaction ee --> ee gamma^(*)(P^2) gamma^*(Q^2)--> ee hadrons are discussed.
The measurements of hadronic structure functions of the photon based on the reaction ee --> ee gamma^(*)(P^2) gamma^*(Q^2)--> ee hadrons are discussed.
△ Less
Submitted 27 June, 2000;
originally announced June 2000.
-
Double-Layer Systems at Zero Magnetic Field
Authors:
C. B. Hanna,
Dylan Haas,
J. C. Diaz-Velez
Abstract:
We investigate theoretically the effects of intralayer and interlayer exchange in biased double-layer electron and hole systems, in the absence of a magnetic field. We use a variational Hartree-Fock-like approximation to analyze the effects of layer separation, layer density, tunneling, and applied gate voltages on the layer densities and on interlayer phase coherence. In agreement with earlier…
▽ More
We investigate theoretically the effects of intralayer and interlayer exchange in biased double-layer electron and hole systems, in the absence of a magnetic field. We use a variational Hartree-Fock-like approximation to analyze the effects of layer separation, layer density, tunneling, and applied gate voltages on the layer densities and on interlayer phase coherence. In agreement with earlier work, we find that for very small layer separations and low layer densities, an interlayer-correlated ground state possessing spontaneous interlayer coherence (SILC) is obtained, even in the absence of interlayer tunneling. In contrast to earlier work, we find that as a function of total density, there exist four, rather than three, distinct noncrystalline phases for balanced double-layer systems without interlayer tunneling. The newly identified phase exists for a narrow range of densities and has three components and slightly unequal layer densities, with one layer being spin polarized, and the other unpolarized. An additional two-component phase is also possible in the presence of sufficiently strong bias or tunneling. The lowest-density SILC phase is the fully spin- and pseudospin-polarized ``one-component'' phase discussed by Zheng {\it et al.} [Phys. Rev. B {\bf 55}, 4506 (1997)]. We argue that this phase will produce a finite interlayer Coulomb drag at zero temperature due to the SILC. We calculate the particle densities in each layer as a function of the gate voltage and total particle density, and find that interlayer exchange can reduce or prevent abrupt transfers of charge between the two layers. We also calculate the effect of interlayer exchange on the interlayer capacitance.
△ Less
Submitted 7 March, 2000;
originally announced March 2000.