-
IKD+: Reliable Low Complexity Deep Models For Retinopathy Classification
Authors:
Shreyas Bhat Brahmavar,
Rohit Rajesh,
Tirtharaj Dash,
Lovekesh Vig,
Tanmay Tulsidas Verlekar,
Md Mahmudul Hasan,
Tariq Khan,
Erik Meijering,
Ashwin Srinivasan
Abstract:
Deep neural network (DNN) models for retinopathy have estimated predictive accuracies in the mid-to-high 90%. However, the following aspects remain unaddressed: State-of-the-art models are complex and require substantial computational infrastructure to train and deploy; The reliability of predictions can vary widely. In this paper, we focus on these aspects and propose a form of iterative knowledg…
▽ More
Deep neural network (DNN) models for retinopathy have estimated predictive accuracies in the mid-to-high 90%. However, the following aspects remain unaddressed: State-of-the-art models are complex and require substantial computational infrastructure to train and deploy; The reliability of predictions can vary widely. In this paper, we focus on these aspects and propose a form of iterative knowledge distillation(IKD), called IKD+ that incorporates a tradeoff between size, accuracy and reliability. We investigate the functioning of IKD+ using two widely used techniques for estimating model calibration (Platt-scaling and temperature-scaling), using the best-performing model available, which is an ensemble of EfficientNets with approximately 100M parameters. We demonstrate that IKD+ equipped with temperature-scaling results in models that show up to approximately 500-fold decreases in the number of parameters than the original ensemble without a significant loss in accuracy. In addition, calibration scores (reliability) for the IKD+ models are as good as or better than the base mode
△ Less
Submitted 3 March, 2023;
originally announced March 2023.
-
ARMA Model Development and Analysis for Global Temperature Uncertainty
Authors:
Mahmud Hasan,
Gauree Wathodkar,
Mathias Muia
Abstract:
Temperature uncertainty models for land and sea surfaces can be developed based on statistical methods. In this paper, we developed a novel time series temperature uncertainty model which is the Auto-regressive Moving Average (ARMA)(1, 1) model. The model was developed for observed annual mean temperature anomaly X(t) which is a combination of true (latent) global anomaly Y (t) for a year (t) and…
▽ More
Temperature uncertainty models for land and sea surfaces can be developed based on statistical methods. In this paper, we developed a novel time series temperature uncertainty model which is the Auto-regressive Moving Average (ARMA)(1, 1) model. The model was developed for observed annual mean temperature anomaly X(t) which is a combination of true (latent) global anomaly Y (t) for a year (t) and normal variable w(t). The uncertainty is taken as the variance of w(t) which was decomposed to Land Surface Temperature (LST) uncertainty, Sea Surface Temperature (SST) uncertainty, and the corresponding source of uncertainty. The ARMA model was analyzed and compared with Auto-regressive (AR), and Auto-regressive integrated moving average (ARIMA) for the data taken from NASA, Goddard Institute for space studies Surface Temperature Analysis. The statistical analysis of the Auto-correlation function (ACF), Partial auto-correlation function (PACF), Normal quantile-quantile (Normal Q-Q) plot, the density of the residuals, and variance of normal variable w(t) show that ARMA(1, 1)is better than AR(1) and ARIMA(1, d, 1) for d = 1, 2.
△ Less
Submitted 3 March, 2023;
originally announced March 2023.
-
Tunneling from general Smith-Volterra-Cantor potential
Authors:
Vibhav Narayan Singh,
Mohammad Umar,
Mohammad Hasan,
Bhabani Prasad Mandal
Abstract:
We study the tunneling problem from general Smith-Volterra-Cantor (SVC) potential of finite length $L$ characterized by the scaling parameter $ρ$ and stage $G$. We show that the SVC($ρ$) potential of stage $G$ is the special case of super periodic potential (SPP) of order $G$. By using SPP formalism developed by us earlier, we provide the close form expression of tunneling probability $T_{G}(k)$ w…
▽ More
We study the tunneling problem from general Smith-Volterra-Cantor (SVC) potential of finite length $L$ characterized by the scaling parameter $ρ$ and stage $G$. We show that the SVC($ρ$) potential of stage $G$ is the special case of super periodic potential (SPP) of order $G$. By using SPP formalism developed by us earlier, we provide the close form expression of tunneling probability $T_{G}(k)$ with the help of $q$-Pochhammer symbol. The profile of $T_{G}(k)$ with wave vector $k$ is found to saturate with increasing stage $G$. Very sharp transmission resonances are found to occur from this system which may find applications in the design of sharp transmission filters.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
Mass-selected Ion-molecule Cluster Beam Apparatus for Ultrafast Photofragmentation Studies
Authors:
Xiaojun Wang,
Mahmudul Hasan,
Lin Fan,
Yibo Wang,
Hui Li,
Daniel S. Slaughter,
Martin Centurion
Abstract:
We describe an apparatus to study the fragmentation of ion-molecule clusters triggered by laser excitation and transfer of an electron from the iodide to the neutral molecule. The apparatus comprises a source to generate ion-molecule clusters, a time-of-flight (TOF) spectrometer and a mass filter to select the desired anions, and a linear-plus-quadratic reflectron mass spectrometer to discriminate…
▽ More
We describe an apparatus to study the fragmentation of ion-molecule clusters triggered by laser excitation and transfer of an electron from the iodide to the neutral molecule. The apparatus comprises a source to generate ion-molecule clusters, a time-of-flight (TOF) spectrometer and a mass filter to select the desired anions, and a linear-plus-quadratic reflectron mass spectrometer to discriminate the fragment anions after the femtosecond laser excites the clusters. The fragment neutrals and anions are then captured by two channeltron detectors. The apparatus performance is tested by measuring the photofragments: I$^-$, CF$_3$I$^-$ and neutrals from photoexcitation of the ion-molecule cluster CF$_3$I$\cdot$I$^-$ using femtosecond UV laser pulses with a wavelength of 266 nm. The experimental results are compared with our ground state and excited state electronic structure calculations and the existed results and calculations, with particular attention to the dynamics of the photoexcitation and photodissociation.
△ Less
Submitted 28 February, 2023;
originally announced March 2023.
-
Observation of Kondo lattice and Kondo-enhanced anomalous Hall effect in an itinerant ferromagnet
Authors:
Zi-Jia Cheng,
Yuqing Huang,
Pengyu Zheng,
Lei Chen,
Tyler A. Cochran,
Haoyu Hu,
Jia-Xin Yin,
Xian P. Yang,
Md Shafayat Hossain,
Qi Zhang,
Ilya Belopolski,
Rui Liu,
Guangming Cheng,
Makoto Hashimoto,
Donghui Lu,
Xitong Xu,
Huibin Zhou,
Wenlong Ma,
Guoqing Chang,
Nan Yao,
Zhi** Yin,
M. Zahid Hasan,
Shuang Jia
Abstract:
The interplay between Kondo screening and magnetic interactions is central to comprehending the intricate phases in heavy-fermion compounds. However, the role of the itinerant magnetic order, which is driven by the conducting (c) electrons, has been largely uncharted in the context of heavy-fermion systems due to the scarcity of material candidates. Here we demonstrate the coexistence of the coher…
▽ More
The interplay between Kondo screening and magnetic interactions is central to comprehending the intricate phases in heavy-fermion compounds. However, the role of the itinerant magnetic order, which is driven by the conducting (c) electrons, has been largely uncharted in the context of heavy-fermion systems due to the scarcity of material candidates. Here we demonstrate the coexistence of the coherent Kondo screening and d-orbital ferromagnetism in material system La$_{1-x}$Ce$_x$Co$_2$As$_2$, through comprehensive thermodynamic and electrical transport measurements. Additionally, using angle-resolved photoemission spectroscopy (ARPES), we further observe the f-orbit-dominated bands near the Fermi level ($E_f$) and signatures of the f-c hybridization below the magnetic transition temperature, providing strong evidence of Kondo lattice state in the presence of ferromagnetic order. Remarkably, by changing the ratio of Ce/La, we observe a substantial enhancement of the anomalous Hall effect (AHE) in the Kondo lattice regime. The value of the Hall conductivity quantitatively matches with the first-principle calculation that optimized with our ARPES results and can be attributed to the large Berry curvature (BC) density engendered by the topological nodal rings composed of the Ce-4f and Co-3d orbitals at $E_f$. Our findings point to the realization of a new platform for exploring correlation-driven topological responses in a novel Kondo lattice environment.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Word level Bangla Sign Language Dataset for Continuous BSL Recognition
Authors:
Md Shamimul Islam,
A. J. M. Akhtarujjaman Joha,
Md Nur Hossain,
Sohaib Abdullah,
Ibrahim Elwarfalli,
Md Mahedi Hasan
Abstract:
An robust sign language recognition system can greatly alleviate communication barriers, particularly for people who struggle with verbal communication. This is crucial for human growth and progress as it enables the expression of thoughts, feelings, and ideas. However, sign recognition is a complex task that faces numerous challenges such as same gesture patterns for multiple signs, lighting, clo…
▽ More
An robust sign language recognition system can greatly alleviate communication barriers, particularly for people who struggle with verbal communication. This is crucial for human growth and progress as it enables the expression of thoughts, feelings, and ideas. However, sign recognition is a complex task that faces numerous challenges such as same gesture patterns for multiple signs, lighting, clothing, carrying conditions, and the presence of large poses, as well as illumination discrepancies across different views. Additionally, the absence of an extensive Bangla sign language video dataset makes it even more challenging to operate recognition systems, particularly when utilizing deep learning techniques. In order to address this issue, firstly, we created a large-scale dataset called the MVBSL-W50, which comprises 50 isolated words across 13 categories. Secondly, we developed an attention-based Bi-GRU model that captures the temporal dynamics of pose information for individuals communicating through sign language. The proposed model utilizes human pose information, which has shown to be successful in analyzing sign language patterns. By focusing solely on movement information and disregarding body appearance and environmental factors, the model is simplified and can achieve a speedier performance. The accuracy of the model is reported to be 85.64%.
△ Less
Submitted 9 April, 2023; v1 submitted 22 February, 2023;
originally announced February 2023.
-
Optical bulk-boundary dichotomy in a quantum spin Hall insulator
Authors:
Junfeng Han,
Pengcheng Mao,
Hailong Chen,
Jia-Xin Yin,
Maoyuan Wang,
Dongyun Chen,
Yongkai Li,
**gchuan Zheng,
Xu Zhang,
Dashuai Ma,
Qiong Ma,
Zhi-Ming Yu,
**jian Zhou,
Cheng-Cheng Liu,
Yeliang Wang,
Shuang Jia,
Yuxiang Weng,
M. Zahid Hasan,
Wende Xiao,
Yugui Yao
Abstract:
The bulk-boundary correspondence is a key concept in topological quantum materials. For instance, a quantum spin Hall insulator features a bulk insulating gap with gapless helical boundary states protected by the underlying Z2 topology. However, the bulk-boundary dichotomy and distinction are rarely explored in optical experiments, which can provide unique information about topological charge carr…
▽ More
The bulk-boundary correspondence is a key concept in topological quantum materials. For instance, a quantum spin Hall insulator features a bulk insulating gap with gapless helical boundary states protected by the underlying Z2 topology. However, the bulk-boundary dichotomy and distinction are rarely explored in optical experiments, which can provide unique information about topological charge carriers beyond transport and electronic spectroscopy techniques. Here, we utilize mid-infrared absorption micro-spectroscopy and pump-probe micro-spectroscopy to elucidate the bulk-boundary optical responses of Bi4Br4, a recently discovered room-temperature quantum spin Hall insulator. Benefiting from the low energy of infrared photons and the high spatial resolution, we unambiguously resolve a strong absorption from the boundary states while the bulk absorption is suppressed by its insulating gap. Moreover, the boundary absorption exhibits a strong polarization anisotropy, consistent with the one-dimensional nature of the topological boundary states. Our infrared pump-probe microscopy further measures a substantially increased carrier lifetime for the boundary states, which reaches one nanosecond scale. The nanosecond lifetime is about one to two orders longer than that of most topological materials and can be attributed to the linear dispersion nature of the helical boundary states. Our findings demonstrate the optical bulk-boundary dichotomy in a topological material and provide a proof-of-principal methodology for studying topological optoelectronics.
△ Less
Submitted 13 February, 2023; v1 submitted 7 February, 2023;
originally announced February 2023.
-
First-principles Studies on Structural, Electronic, Optical and Mechanical Properties of Inorganic CS2NaTlX6 (X = F, Cl, Br) Double Halide Perovskites
Authors:
Mohammed Mehedi Hasan,
Nazmul Hasan,
Alamgir Kabir
Abstract:
The structural, electrical, optical, and mechanical characteristics of the lead-free halide double perovskites Cs2NaTlX6 X = F, Cl, Br are calculated by utilizing PBE functional within generalized gradient approximation GGA under the context of density functional theory DFT.The structural properties such as lattice parameter, cell volume, total energy, bulk modulus, pressure derivative, and tolera…
▽ More
The structural, electrical, optical, and mechanical characteristics of the lead-free halide double perovskites Cs2NaTlX6 X = F, Cl, Br are calculated by utilizing PBE functional within generalized gradient approximation GGA under the context of density functional theory DFT.The structural properties such as lattice parameter, cell volume, total energy, bulk modulus, pressure derivative, and tolerance factor are computed at equilibrium.The electronic density of states reveals the semiconducting nature of the compound and the band structure exhibits the nature of the band gap to be direct.HSE06 functional is introduced to correct the underestimated band gap as obtained in the GGA-PBE functional.The real and imaginary components of the dielectric function, absorption coefficient, energy loss function, reflectivity, refractive index, and extinction coefficient are analyzed and explained by electronic structures.
△ Less
Submitted 4 February, 2023;
originally announced February 2023.
-
Fractal Patterns in the Parameter Space of Bi-stable Duffing Oscillator
Authors:
Md Nahid Hasan,
Taylor E. Greenwood,
Robert G. Parker,
Pai Wang,
Yong Lin Kong
Abstract:
We study the dissipative bi-stable Duffing oscillator with equal energy wells and observe fractal patterns in the parameter space of driving frequency, forcing amplitude, and dam** ratio. Our numerical investigation reveals the Hausdorff fractal dimension of the boundaries that separate the oscillator's intra-well and inter-well behaviors. Furthermore, we categorize the inter-well behaviors as t…
▽ More
We study the dissipative bi-stable Duffing oscillator with equal energy wells and observe fractal patterns in the parameter space of driving frequency, forcing amplitude, and dam** ratio. Our numerical investigation reveals the Hausdorff fractal dimension of the boundaries that separate the oscillator's intra-well and inter-well behaviors. Furthermore, we categorize the inter-well behaviors as three steady-state types: switching, reverting, and vacillating. While fractal patterns in the phase space are well-known and heavily studied, our results point to a new research direction about fractal patterns in the parameter space. Another implication of this study is that the vibration of a continuous bi-stable system modeled using a single-mode approximation also manifests fractal patterns in the parameter space. In addition, our findings can guide the design of next-generation bi-stable and multi-stable mechanical metamaterials.
△ Less
Submitted 13 February, 2023; v1 submitted 26 January, 2023;
originally announced January 2023.
-
Anomalously high supercurrent density in a two-dimensional topological material
Authors:
Qi Zhang,
Md Shafayat Hossain,
Brian Casas,
Wenkai Zheng,
Zi-Jia Cheng,
Zhuangchai Lai,
Yi-Hsin Tu,
Guoqing Chang,
Yao Yao,
Siyuan Li,
Yu-Xiao Jiang,
Sougata Mardanya,
Tay-Rong Chang,
**g-Yang You,
Yuan-** Feng,
Guangming Cheng,
Jia-Xin Yin,
Nana Shumiya,
Tyler A. Cochran,
Xian P. Yang,
Maksim Litskevich,
Nan Yao,
Kenji Watanabe,
Takashi Taniguchi,
Hua Zhang
, et al. (2 additional authors not shown)
Abstract:
Ongoing advances in superconductors continue to revolutionize technology thanks to the increasingly versatile and robust availability of lossless supercurrent. In particular high supercurrent density can lead to more efficient and compact power transmission lines, high-field magnets, as well as high-performance nanoscale radiation detectors and superconducting spintronics. Here, we report the disc…
▽ More
Ongoing advances in superconductors continue to revolutionize technology thanks to the increasingly versatile and robust availability of lossless supercurrent. In particular high supercurrent density can lead to more efficient and compact power transmission lines, high-field magnets, as well as high-performance nanoscale radiation detectors and superconducting spintronics. Here, we report the discovery of an unprecedentedly high superconducting critical current density (17 MA/cm2 at 0 T and 7 MA/cm2 at 8 T) in 1T'-WS2, exceeding those of all reported two-dimensional superconductors to date. 1T'-WS2 features a strongly anisotropic (both in- and out-of-plane) superconducting state that violates the Pauli paramagnetic limit signaling the presence of unconventional superconductivity. Spectroscopic imaging of the vortices further substantiates the anisotropic nature of the superconducting state. More intriguingly, the normal state of 1T'-WS2 carries topological properties. The band structure obtained via angle-resolved photoemission spectroscopy and first-principles calculations points to a Z2 topological invariant. The concomitance of topology and superconductivity in 1T'-WS2 establishes it as a topological superconductor candidate, which is promising for the development of quantum computing technology.
△ Less
Submitted 26 January, 2023;
originally announced January 2023.
-
Continuous tuning & thermally induced frequency drift stabilisation of time delay oscillators such as the optoelectronic oscillator
Authors:
Mehedi Hasan,
Charles Nicholls,
Keegan Pitre,
Trevor Hall
Abstract:
Delay line oscillators based on photonic components, such as the optoelectronic oscillator (OEO), offer the potential for realization of phase noise levels orders of magnitude lower than achievable by conventional microwave sources. Fibre optic-based delay lines can realize the large delay required for low phase noise systems whilst simultaneously achieving insertion loss levels that can be compen…
▽ More
Delay line oscillators based on photonic components, such as the optoelectronic oscillator (OEO), offer the potential for realization of phase noise levels orders of magnitude lower than achievable by conventional microwave sources. Fibre optic-based delay lines can realize the large delay required for low phase noise systems whilst simultaneously achieving insertion loss levels that can be compensated by available microwave and photonic amplification technologies. However, the long fibre is vulnerable to environmental perturbations such as mechanical vibrations and variations in ambient temperature, which result in short term fluctuations and thermally induced drift of the oscillation frequency. The phase shifter used conventionally to adjust the frequency of an OEO to enable phase lock has a finite range that is insufficient to compensate the delay change resulting from operational temperature ranges. A solution to continuous tuning without mode-hop** and to compensation of thermally induced frequency drift without loss of lock of a time delay oscillator is proposed. The basic concept is to introduce a tuning mechanism that works with Cartesian co-ordinates on the complex plane and to avoid explicit use of polar co-ordinates. Consequently, the transmission of the tuning component may traverse the unit circle in either direction multiple times without range limitation to the phase. Thereby tuning by mode-hop** is avoided and expedients to stabilisation, such as the use of tunable lasers within a control loop or precision temperature stabilisation measures are not required. The concept is verified by Simulink simulations. The method has been experimentally tested successfully using a prototype OEO phase locked to a system reference. Solid lock was maintained even when the OEO was placed in an oven and cycled over a temperature range from ambient to 80 °C.
△ Less
Submitted 11 January, 2023;
originally announced January 2023.
-
Broadband high-resolution integrated spectrometer architecture & data processing method
Authors:
Mehedi Hasan,
Gazi Mahamud Hasan,
Houman Ghorbani,
Mohammad Rad,
Peng Liu,
Eric Bernier,
Trevor Hall
Abstract:
Up-to-date network telemetry is the key enabler for resource optimization by capacity scaling, fault recovery, and network reconfiguration among other means. Reliable optical performance monitoring in general and, specifically, the monitoring of the spectral profile of WDM signals in fixed- and flex- grid architectures across the entire C-band, remains challenging. This article describes a two-sta…
▽ More
Up-to-date network telemetry is the key enabler for resource optimization by capacity scaling, fault recovery, and network reconfiguration among other means. Reliable optical performance monitoring in general and, specifically, the monitoring of the spectral profile of WDM signals in fixed- and flex- grid architectures across the entire C-band, remains challenging. This article describes a two-stage spectrometer architecture amenable to integration on a single chip that can measure quantitatively the spectrum across the entire C-band with a resolution of 1 GHz approximately. The first stage consists of a ring resonator with intra-ring phase shifter to provide a tuneable fine filter. The second stage makes use of an AWG subsystem and novel processing algorithm to synthesize a tuneable coarse filter with a flat passband which isolates individual resonances of a multiplicity of ring resonances. Due to its maturity and low loss, CMOS compatible Si$_3$N$_4$ is chosen for integration. A fabricated ring resonator functioning over the entire C-band with 1.3 GHz FWHM bandwidth resonances tunable over a complete free spectral range of 50 GHz is experimentally demonstrated. The complete system operation is demonstrated using an industry standard simulation tool and AWG constructor data. The operation of the circuit is invariant to the optical path length between individual components substantially improving robustness to fabrication process variations.
△ Less
Submitted 16 January, 2023;
originally announced January 2023.
-
Coexistence of bulk-nodal and surface-nodeless Cooper pairings in a superconducting Dirac semimetal
Authors:
Xian P. Yang,
Yigui Zhong,
Sougata Mardanya,
Tyler A. Cochran,
Ramakanta Chapai,
Akifumi Mine,
Junyi Zhang,
Jaime Sánchez-Barriga,
Zi-Jia Cheng,
Oliver J. Clark,
Jia- Xin Yin,
Joanna Blawat,
Guangming Cheng,
Ilya Belopolski,
Tsubaki Nagashima,
Najafzadeh Sahand,
Shiyuan Gao,
Nan Yao,
Arun Bansil,
Rongying **,
Tay-Rong Chang,
Shik Shin,
Kozo Okazaki,
M. Zahid Hasan
Abstract:
The interplay of nontrivial topology and superconductivity in condensed matter physics gives rise to exotic phenomena. However, materials are extremely rare where it is possible to explore the full details of the superconducting pairing. Here, we investigate the momentum dependence of the superconducting gap distribution in a novel Dirac material PdTe. Using high resolution, low temperature photoe…
▽ More
The interplay of nontrivial topology and superconductivity in condensed matter physics gives rise to exotic phenomena. However, materials are extremely rare where it is possible to explore the full details of the superconducting pairing. Here, we investigate the momentum dependence of the superconducting gap distribution in a novel Dirac material PdTe. Using high resolution, low temperature photoemission spectroscopy, we establish it as a spin-orbit coupled Dirac semimetal with the topological Fermi arc crossing the Fermi level on the (010) surface. This spin-textured surface state exhibits a fully gapped superconducting Cooper pairing structure below Tc~4.5K. Moreover, we find a node in the bulk near the Brillouin zone boundary, away from the topological Fermi arc.These observations not only demonstrate the band resolved electronic correlation between topological Fermi arc states and the way it induces Cooper pairing in PdTe, but also provide a rare case where surface and bulk states host a coexistence of nodeless and nodal gap structures enforced by spin-orbit coupling.
△ Less
Submitted 3 January, 2023;
originally announced January 2023.
-
Transverse circular photogalvanic effect associated with Lorentz-violating Weyl fermions
Authors:
Mohammad Yahyavi,
Yuanjun **,
Yilin Zhao,
Zi-Jia Cheng,
Tyler A. Cochran,
Yi-Chun Hung,
Tay-Rong Chang,
Qiong Ma,
Su-Yang Xu,
Arun Bansil,
M. Zahid Hasan,
Guoqing Chang
Abstract:
Nonlinear optical responses of quantum materials have recently undergone dramatic developments to unveil nontrivial geometry and topology. A remarkable example is the quantized longitudinal circular photogalvanic effect (CPGE) associated with the Chern number of Weyl fermions, while the physics of transverse CPGE in Weyl semimetals remains exclusive. Here, we show that the transverse CPGE of Loren…
▽ More
Nonlinear optical responses of quantum materials have recently undergone dramatic developments to unveil nontrivial geometry and topology. A remarkable example is the quantized longitudinal circular photogalvanic effect (CPGE) associated with the Chern number of Weyl fermions, while the physics of transverse CPGE in Weyl semimetals remains exclusive. Here, we show that the transverse CPGE of Lorentz invariant Weyl fermions is forced to be zero. We find that the transverse photocurrents of Weyl fermions are associated not only with the Chern numbers but also with the degree of Lorentz-symmetry breaking in condensed matter systems. Based on the generic two-band model analysis, we provide a new powerful equation to calculate the transverse CPGE based on the tilting and war** terms of Weyl fermions. Our results are more capable in designing large transverse CPGE of Weyl semimetals in experiments and are applied to more than tens of Weyl materials to estimate their photocurrents. Our method paves the way to study the CPGE of massless or massive quasiparticles to design next-generation quantum optoelectronics.
△ Less
Submitted 3 January, 2023;
originally announced January 2023.
-
Quantum tunneling from family of Cantor potentials in fractional quantum mechanics
Authors:
Vibhav Narayan Singh,
Mohammad Umar,
Mohammad Hasan,
Bhabani Prasad Mandal
Abstract:
We explore the features of non-relativistic quantum tunneling in space fractional quantum mechanics through a family of Cantor potentials. We consider two types of potentials: general Cantor and general Smith-Volterra-Cantor potential. The Cantor potential is an example of fractal potential while the Smith-Volterra-Cantor potential doesn't belong to the category of a fractal system. The present st…
▽ More
We explore the features of non-relativistic quantum tunneling in space fractional quantum mechanics through a family of Cantor potentials. We consider two types of potentials: general Cantor and general Smith-Volterra-Cantor potential. The Cantor potential is an example of fractal potential while the Smith-Volterra-Cantor potential doesn't belong to the category of a fractal system. The present study brings for the first time, the study of quantum tunneling through fractal potential in fractional quantum mechanics. We report several new features of scattering in the domain of space fractional quantum mechanics including the emergence of energy-band like features from these systems and extremely sharp transmission features. Further the scaling relation of the scattering amplitude with wave vector $k$ is presented analytically for both types of potentials.
△ Less
Submitted 29 December, 2022;
originally announced January 2023.
-
A Comparison Study of Deep CNN Architecture in Detecting of Pneumonia
Authors:
Al Mohidur Rahman Porag,
Md. Mahedi Hasan,
Dr. Md Taimur Ahad
Abstract:
Pneumonia, a respiratory infection brought on by bacteria or viruses, affects a large number of people, especially in develo** and impoverished countries where high levels of pollution, unclean living conditions, and overcrowding are frequently observed, along with insufficient medical infrastructure. Pleural effusion, a condition in which fluids fill the lung and complicate breathing, is brough…
▽ More
Pneumonia, a respiratory infection brought on by bacteria or viruses, affects a large number of people, especially in develo** and impoverished countries where high levels of pollution, unclean living conditions, and overcrowding are frequently observed, along with insufficient medical infrastructure. Pleural effusion, a condition in which fluids fill the lung and complicate breathing, is brought on by pneumonia. Early detection of pneumonia is essential for ensuring curative care and boosting survival rates. The approach most usually used to diagnose pneumonia is chest X-ray imaging. The purpose of this work is to develop a method for the automatic diagnosis of bacterial and viral pneumonia in digital x-ray pictures. This article first presents the authors' technique, and then gives a comprehensive report on recent developments in the field of reliable diagnosis of pneumonia. In this study, here tuned a state-of-the-art deep convolutional neural network to classify plant diseases based on images and tested its performance. Deep learning architecture is compared empirically. VGG19, ResNet with 152v2, Resnext101, Seresnet152, Mobilenettv2, and DenseNet with 201 layers are among the architectures tested. Experiment data consists of two groups, sick and healthy X-ray pictures. To take appropriate action against plant diseases as soon as possible, rapid disease identification models are preferred. DenseNet201 has shown no overfitting or performance degradation in our experiments, and its accuracy tends to increase as the number of epochs increases. Further, DenseNet201 achieves state-of-the-art performance with a significantly a smaller number of parameters and within a reasonable computing time. This architecture outperforms the competition in terms of testing accuracy, scoring 95%. Each architecture was trained using Keras, using Theano as the backend.
△ Less
Submitted 14 February, 2023; v1 submitted 30 December, 2022;
originally announced December 2022.
-
Efficient Movie Scene Detection using State-Space Transformers
Authors:
Md Mohaiminul Islam,
Mahmudul Hasan,
Kishan Shamsundar Athrey,
Tony Braskich,
Gedas Bertasius
Abstract:
The ability to distinguish between different movie scenes is critical for understanding the storyline of a movie. However, accurately detecting movie scenes is often challenging as it requires the ability to reason over very long movie segments. This is in contrast to most existing video recognition models, which are typically designed for short-range video analysis. This work proposes a State-Spa…
▽ More
The ability to distinguish between different movie scenes is critical for understanding the storyline of a movie. However, accurately detecting movie scenes is often challenging as it requires the ability to reason over very long movie segments. This is in contrast to most existing video recognition models, which are typically designed for short-range video analysis. This work proposes a State-Space Transformer model that can efficiently capture dependencies in long movie videos for accurate movie scene detection. Our model, dubbed TranS4mer, is built using a novel S4A building block, which combines the strengths of structured state-space sequence (S4) and self-attention (A) layers. Given a sequence of frames divided into movie shots (uninterrupted periods where the camera position does not change), the S4A block first applies self-attention to capture short-range intra-shot dependencies. Afterward, the state-space operation in the S4A block is used to aggregate long-range inter-shot cues. The final TranS4mer model, which can be trained end-to-end, is obtained by stacking the S4A blocks one after the other multiple times. Our proposed TranS4mer outperforms all prior methods in three movie scene detection datasets, including MovieNet, BBC, and OVSD, while also being $2\times$ faster and requiring $3\times$ less GPU memory than standard Transformer models. We will release our code and models.
△ Less
Submitted 21 June, 2023; v1 submitted 29 December, 2022;
originally announced December 2022.
-
Brain Cancer Segmentation Using YOLOv5 Deep Neural Network
Authors:
Sudipto Paul,
Dr. Md Taimur Ahad,
Md. Mahedi Hasan
Abstract:
An expansion of aberrant brain cells is referred to as a brain tumor. The brain's architecture is extremely intricate, with several regions controlling various nervous system processes. Any portion of the brain or skull can develop a brain tumor, including the brain's protective coating, the base of the skull, the brainstem, the sinuses, the nasal cavity, and many other places. Over the past ten y…
▽ More
An expansion of aberrant brain cells is referred to as a brain tumor. The brain's architecture is extremely intricate, with several regions controlling various nervous system processes. Any portion of the brain or skull can develop a brain tumor, including the brain's protective coating, the base of the skull, the brainstem, the sinuses, the nasal cavity, and many other places. Over the past ten years, numerous developments in the field of computer-aided brain tumor diagnosis have been made. Recently, instance segmentation has attracted a lot of interest in numerous computer vision applications. It seeks to assign various IDs to various scene objects, even if they are members of the same class. Typically, a two-stage pipeline is used to perform instance segmentation. This study shows brain cancer segmentation using YOLOv5. Yolo takes dataset as picture format and corresponding text file. You Only Look Once (YOLO) is a viral and widely used algorithm. YOLO is famous for its object recognition properties. You Only Look Once (YOLO) is a popular algorithm that has gone viral. YOLO is well known for its ability to identify objects. YOLO V2, V3, V4, and V5 are some of the YOLO latest versions that experts have published in recent years. Early brain tumor detection is one of the most important jobs that neurologists and radiologists have. However, it can be difficult and error-prone to manually identify and segment brain tumors from Magnetic Resonance Imaging (MRI) data. For making an early diagnosis of the condition, an automated brain tumor detection system is necessary. The model of the research paper has three classes. They are respectively Meningioma, Pituitary, Glioma. The results show that, our model achieves competitive accuracy, in terms of runtime usage of M2 10 core GPU.
△ Less
Submitted 27 December, 2022;
originally announced December 2022.
-
Imaging real-space flat band localization in kagome magnet FeSn
Authors:
Daniel Multer,
Jia-Xin Yin,
Md. Shafayat Hossain,
Xian Yang,
Brian C Sales,
Hu Miao,
William R Meier,
Yu-Xiao Jiang,
Yaofeng Xie,
Pengcheng Dai,
Jianpeng Liu,
Hanbin Deng,
Hechang Lei,
Biao Lian,
M. Zahid Hasan
Abstract:
Kagome lattices host flat bands due to their frustrated lattice geometry, which leads to destructive quantum interference of electron wave functions. Here, we report imaging of the kagome flat band localization in real-space using scanning tunneling microscopy. We identify both the Fe3Sn kagome lattice layer and the Sn2 honeycomb layer with atomic resolution in kagome antiferromagnet FeSn. On the…
▽ More
Kagome lattices host flat bands due to their frustrated lattice geometry, which leads to destructive quantum interference of electron wave functions. Here, we report imaging of the kagome flat band localization in real-space using scanning tunneling microscopy. We identify both the Fe3Sn kagome lattice layer and the Sn2 honeycomb layer with atomic resolution in kagome antiferromagnet FeSn. On the Fe3Sn lattice, at the flat band energy determined by the angle resolved photoemission spectroscopy, tunneling spectroscopy detects an unusual state localized uniquely at the Fe kagome lattice network. We further show that the vectorial in-plane magnetic field manipulates the spatial anisotropy of the localization state within each kagome unit cell. Our results are consistent with the real-space flat band localization in the magnetic kagome lattice. We further discuss the magnetic tuning of flat band localization under the spin-orbit coupled magnetic kagome lattice model.
△ Less
Submitted 24 December, 2022;
originally announced December 2022.
-
Topological kagome magnets and superconductors
Authors:
Jia-Xin Yin,
Biao Lian,
M Zahid Hasan
Abstract:
A kagome lattice naturally features Dirac fermions, flat bands and van Hove singularities in its electronic structure. The Dirac fermions encode topology, flat bands favour correlated phenomena such as magnetism, and van Hove singularities can lead to instabilities towards long-range many-body orders, altogether allowing for the realization and discovery of a series of topological kagome magnets a…
▽ More
A kagome lattice naturally features Dirac fermions, flat bands and van Hove singularities in its electronic structure. The Dirac fermions encode topology, flat bands favour correlated phenomena such as magnetism, and van Hove singularities can lead to instabilities towards long-range many-body orders, altogether allowing for the realization and discovery of a series of topological kagome magnets and superconductors with exotic properties. Recent progress in exploring kagome materials has revealed rich emergent phenomena resulting from the quantum interactions between geometry, topology, spin and correlation. Here we review these key developments in this field, starting from the fundamental concepts of a kagome lattice, to the realizations of Chern and Weyl topological magnetism, to various flat-band many-body correlations, and then to the puzzles of unconventional charge-density waves and superconductivity. We highlight the connection between theoretical ideas and experimental observations, and the bond between quantum interactions within kagome magnets and kagome superconductors, as well as their relation to the concepts in topological insulators, topological superconductors, Weyl semimetals and high-temperature superconductors. These developments broadly bridge topological quantum physics and correlated many-body physics in a wide range of bulk materials and substantially advance the frontier of topological quantum matter.
△ Less
Submitted 22 December, 2022;
originally announced December 2022.
-
Over-the-Air Federated Learning with Enhanced Privacy
Authors:
Xiaochan Xue,
Moh Khalid Hasan,
Shucheng Yu,
Laxima Niure Kandel,
Min Song
Abstract:
Federated learning (FL) has emerged as a promising learning paradigm in which only local model parameters (gradients) are shared. Private user data never leaves the local devices thus preserving data privacy. However, recent research has shown that even when local data is never shared by a user, exchanging model parameters without protection can also leak private information. Moreover, in wireless…
▽ More
Federated learning (FL) has emerged as a promising learning paradigm in which only local model parameters (gradients) are shared. Private user data never leaves the local devices thus preserving data privacy. However, recent research has shown that even when local data is never shared by a user, exchanging model parameters without protection can also leak private information. Moreover, in wireless systems, the frequent transmission of model parameters can cause tremendous bandwidth consumption and network congestion when the model is large. To address this problem, we propose a new FL framework with efficient over-the-air parameter aggregation and strong privacy protection of both user data and models. We achieve this by introducing pairwise cancellable random artificial noises (PCR-ANs) on end devices. As compared to existing over-the-air computation (AirComp) based FL schemes, our design provides stronger privacy protection. We analytically show the secrecy capacity and the convergence rate of the proposed wireless FL aggregation algorithm.
△ Less
Submitted 22 December, 2022;
originally announced December 2022.
-
Investigation of Minerals Using Hyperspectral Satellite Imagery in Bangladesh
Authors:
Nazmul Hasan,
Kazi Mahmudul Hasan,
Md. Tahsinul Islam,
Shahnewaz Siddique
Abstract:
Mineral identification using remote sensing technologies is becoming more dominant in this field since it saves time by demonstrating a more effective way for land resources survey. In such remote sensing technologies, hyperspectral remote sensing (HSRS) technology has increased gradually for its efficient manner. This technology is usually used from an airborne platform, i.e., satellite. Hence, s…
▽ More
Mineral identification using remote sensing technologies is becoming more dominant in this field since it saves time by demonstrating a more effective way for land resources survey. In such remote sensing technologies, hyperspectral remote sensing (HSRS) technology has increased gradually for its efficient manner. This technology is usually used from an airborne platform, i.e., satellite. Hence, satellite imagery remote sensing technology is now more capable of providing accuracy in mineral identification, and map**. Hyperspectral satellite imagery can identify minerals more accurately compared to traditional technologies in remote sensing by constructing a complete reflectance of the spectrum from each pixel with its advanced imaging sensor. Bangladesh is a develo** country with an area of 1,50,000 square kilometers located in Southeast Asia. Though it is a small country, it is enriched with several mineral resources through rivers, forests, hills, and the Bay of Bengal. In this study, hyperspectral imaging technology is employed on some major identical areas (Maheshkhali, Netrokona, Panchagarh, and Patuakhali) of Bangladesh to identify minerals there. As there are no studies done in Bangladesh using hyperspectral imaging yet, it is a good opportunity to explore the potentiality of HS imagery in this field. In this study, the FLAASH (Fast Line-of-sight Atmospheric Analysis) module with necessary parameter settings is used to filter the data, and finally, mineral identification is done by the spectral matched filtering method. Our investigation resulted in finding some potential minerals in those areas including Stariolite, Diasphore, Zircon, Alunite, Quartz, and so on. This indicates that there still is enormous potential for further exploration of minerals in Bangladesh by Hyperspectral Satellite Imagery.
△ Less
Submitted 8 December, 2022;
originally announced December 2022.
-
Enhancing Data Security for Cloud Computing Applications through Distributed Blockchain-based SDN Architecture in IoT Networks
Authors:
Anichur Rahman,
Md. Jahidul Islam,
Rafiqul Islam,
Ayesha Aziz,
Dipanjali Kundu,
Sadia Sazzad,
Md. Razaul Karim,
Mahedi Hasan,
Ziaur Rahman,
Said Elnaffar,
Shahab S. Band
Abstract:
Blockchain (BC) and Software Defined Networking (SDN) are some of the most prominent emerging technologies in recent research. These technologies provide security, integrity, as well as confidentiality in their respective applications. Cloud computing has also been a popular comprehensive technology for several years. Confidential information is often shared with the cloud infrastructure to give c…
▽ More
Blockchain (BC) and Software Defined Networking (SDN) are some of the most prominent emerging technologies in recent research. These technologies provide security, integrity, as well as confidentiality in their respective applications. Cloud computing has also been a popular comprehensive technology for several years. Confidential information is often shared with the cloud infrastructure to give customers access to remote resources, such as computation and storage operations. However, cloud computing also presents substantial security threats, issues, and challenges. Therefore, to overcome these difficulties, we propose integrating Blockchain and SDN in the cloud computing platform. In this research, we introduce the architecture to better secure clouds. Moreover, we leverage a distributed Blockchain approach to convey security, confidentiality, privacy, integrity, adaptability, and scalability in the proposed architecture. BC provides a distributed or decentralized and efficient environment for users. Also, we present an SDN approach to improving the reliability, stability, and load balancing capabilities of the cloud infrastructure. Finally, we provide an experimental evaluation of the performance of our SDN and BC-based implementation using different parameters, also monitoring some attacks in the system and proving its efficacy.
△ Less
Submitted 27 November, 2022;
originally announced November 2022.
-
Comparative Study of the Structural, Mechanical, Electronic, Optical and Thermodynamic Properties of Superconducting Disilicide YT$_2$Si$_2$ (X=Co, Ni, Ru, Rh, Pd, Ir) by DFT Simulation
Authors:
Md. Atikur Rahmana,
Mahbub Hasana,
Rukaia Khatuna,
Jannatul Ferdous Lubnaa,
Sushmita Sarkera,
Md. Zahid Hasan,
Wakil Hasan
Abstract:
DFT simulation based ab-initio approach has been executed for investigating the comparative study of the physical properties of superconducting disilicide materials YT$_2$Si$_2$ (T= Co, Ni, Ru, Rh, Pd, Ir). This is the first comparative theoretical investigation of these materials, which is done through Cambridge Serial Total Energy Package module.
DFT simulation based ab-initio approach has been executed for investigating the comparative study of the physical properties of superconducting disilicide materials YT$_2$Si$_2$ (T= Co, Ni, Ru, Rh, Pd, Ir). This is the first comparative theoretical investigation of these materials, which is done through Cambridge Serial Total Energy Package module.
△ Less
Submitted 19 November, 2022;
originally announced November 2022.
-
Energetics of Cytoskeletal Gel Contraction
Authors:
Matteo Ferraresso,
Albert Kong,
Mehadi Hasan,
Gwynn J. Elfring,
Daniele Agostinelli,
Mattia Bacca
Abstract:
Cytoskeletal gels are prototyped to reproduce the mechanical contraction of the cytoskeleton in-vitro. They are composed of a polymer network (backbone), swollen by the presence of a liquid solvent, and active molecules (molecular motors, MMs) that transduce chemical energy into the mechanical work of contraction. These motors attach to the polymer chains to shorten them and/or act as dynamic cros…
▽ More
Cytoskeletal gels are prototyped to reproduce the mechanical contraction of the cytoskeleton in-vitro. They are composed of a polymer network (backbone), swollen by the presence of a liquid solvent, and active molecules (molecular motors, MMs) that transduce chemical energy into the mechanical work of contraction. These motors attach to the polymer chains to shorten them and/or act as dynamic crosslinks, thereby constraining the thermal fluctuation of the chains. We describe both mechanisms thermodynamically as a microstructural reconfiguration, where the backbone stiffens to motivate solvent (out)flow and accommodate contraction. Via simple steady-state energetic analysis, under the simplest case of isotropic contraction, we quantify the mechanical energy required to achieve contraction as a function of polymer chain density and molecular motor density. We identify two limit cases, (fm) fast MM activation for which MMs provide all the available mechanical energy instantaneously and leave the polymer in a stiffened state, i.e. their activity occurs at a time scale that is much smaller than solvent diffusion, and (sm) slow MM activation for which the MM activation timescale is much longer. To achieve the same final contracted state, fm requires the largest amount of work per unit reference volume, while sm requires the least. For all intermediate cases where the timescale of MM activation is comparable with that of solvent flow, the required work ranges between the two cases. We provide all these quantities as a function of chain density and MM density. Finally, we compare our results with experiments and observe good agreement.
△ Less
Submitted 22 June, 2023; v1 submitted 17 November, 2022;
originally announced November 2022.
-
Instability in strongly stratified plane Couette flow with application to supercritical fluids
Authors:
B. Bugeat,
P. C. Boldini,
A. M. Hasan,
R. Pecnik
Abstract:
This paper addresses the stability of plane Couette flow in the presence of strong density and viscosity stratifications. It demonstrates the existence of a generalised inflection point that satisfies the generalised Fjortoft's criterion of instability when a minimum of kinematic viscosity is present in the base flow. The characteristic scales associated with this minimum are identified as the pri…
▽ More
This paper addresses the stability of plane Couette flow in the presence of strong density and viscosity stratifications. It demonstrates the existence of a generalised inflection point that satisfies the generalised Fjortoft's criterion of instability when a minimum of kinematic viscosity is present in the base flow. The characteristic scales associated with this minimum are identified as the primary controlling parameters of the associated instability, regardless of the type of stratification. To support this finding, analytical stability models are derived in the long wave approximation using piecewise linear base flows. Numerical stability calculations are carried out to validate these models and to provide further information on the production of disturbance vorticity. All instabilities are interpreted as arising from the interaction between two vorticity waves. Depending on the type of stratification, these two waves are produced by different physical mechanisms. When both strong density and viscosity stratifications are present, we show that they result from the concurrent action of shear and inertial baroclinic effects. The stability models developed for simple fluid models ultimately shed light on a recently observed unstable mode in supercritical fluids (Ren et al., J. Fluid Mech., vol. 871, 2019, pp. 831-864), providing a quantitative prediction of the stability diagram and identifying the dominant mechanisms at play. Furthermore, our study suggests that the minimum of kinematic viscosity reached at the Widom line in these fluids is the leading cause of their instability. The existence of similar instabilities in different fluids and flows (e.g., miscible fluids) is finally discussed.
△ Less
Submitted 12 June, 2024; v1 submitted 9 November, 2022;
originally announced November 2022.
-
A Review of Applications, Prospects, and Challenges of Proton-Conducting Zirconates in Electrochemical Hydrogen Devices
Authors:
M. Khalid Hossain,
S. M. Kamrul Hasan,
M. Imran Hossain,
Ranjit C. Das,
H. Bencherif,
M. H. K. Rubel,
Md. Ferdous Rahman,
Tanvir Emrose,
Kenichi Hashizume
Abstract:
In the future, when fossil fuels are exhausted, alternative energy sources will be essential for everyday needs. Hydrogen-based energy can play a vital role in this aspect. This energy is green, clean, and renewable. Elec-trochemical hydrogen devices have been used extensively in nuclear power plants to manage hydrogen-based renewable fuel. Doped zirconate materials are commonly used as an electro…
▽ More
In the future, when fossil fuels are exhausted, alternative energy sources will be essential for everyday needs. Hydrogen-based energy can play a vital role in this aspect. This energy is green, clean, and renewable. Elec-trochemical hydrogen devices have been used extensively in nuclear power plants to manage hydrogen-based renewable fuel. Doped zirconate materials are commonly used as an electrolyte in these electrochemical devices. These materials have excellent physical stability and high proton transport numbers, which make them suitable for multiple applications. Do** enhances the physical and electronic properties of zirconate materials and makes them ideal for practical applications. This review highlights the applications of zirconate-based pro-ton-conducting materials in electrochemical cells, particularly in tritium monitors, tritium recovery, hydrogen sensors, and hydrogen pump systems. The central section of this review summarizes recent investigations and provides a comprehensive insight into the various do** schemes, experimental setup, instrumentation, op-timum operating conditions, morphology, composition, and performance of zirconate electrolyte materials. In addition, different challenges that are hindering zirconate materials from achieving their full potential in elec-trochemical hydrogen devices are discussed. Finally, this paper lays out a few pathways for aspirants who wish to undertake research in this field.
△ Less
Submitted 6 November, 2022;
originally announced November 2022.
-
Investigating self-supervised, weakly supervised and fully supervised training approaches for multi-domain automatic speech recognition: a study on Bangladeshi Bangla
Authors:
Ahnaf Mozib Samin,
M. Humayon Kobir,
Md. Mushtaq Shahriyar Rafee,
M. Firoz Ahmed,
Mehedi Hasan,
Partha Ghosh,
Shafkat Kibria,
M. Shahidur Rahman
Abstract:
Despite huge improvements in automatic speech recognition (ASR) employing neural networks, ASR systems still suffer from a lack of robustness and generalizability issues due to domain shifting. This is mainly because principal corpus design criteria are often not identified and examined adequately while compiling ASR datasets. In this study, we investigate the robustness of the state-of-the-art tr…
▽ More
Despite huge improvements in automatic speech recognition (ASR) employing neural networks, ASR systems still suffer from a lack of robustness and generalizability issues due to domain shifting. This is mainly because principal corpus design criteria are often not identified and examined adequately while compiling ASR datasets. In this study, we investigate the robustness of the state-of-the-art transfer learning approaches such as self-supervised wav2vec 2.0 and weakly supervised Whisper as well as fully supervised convolutional neural networks (CNNs) for multi-domain ASR. We also demonstrate the significance of domain selection while building a corpus by assessing these models on a novel multi-domain Bangladeshi Bangla ASR evaluation benchmark - BanSpeech, which contains approximately 6.52 hours of human-annotated speech and 8085 utterances from 13 distinct domains. SUBAK.KO, a mostly read speech corpus for the morphologically rich language Bangla, has been used to train the ASR systems. Experimental evaluation reveals that self-supervised cross-lingual pre-training is the best strategy compared to weak supervision and full supervision to tackle the multi-domain ASR task. Moreover, the ASR models trained on SUBAK.KO face difficulty recognizing speech from domains with mostly spontaneous speech. The BanSpeech will be publicly available to meet the need for a challenging evaluation benchmark for Bangla ASR.
△ Less
Submitted 10 May, 2023; v1 submitted 23 October, 2022;
originally announced October 2022.
-
An enhanced method of initial cluster center selection for K-means algorithm
Authors:
Zillur Rahman,
Md. Sabir Hossain,
Mohammad Hasan,
Ahmed Imteaj
Abstract:
Clustering is one of the widely used techniques to find out patterns from a dataset that can be applied in different applications or analyses. K-means, the most popular and simple clustering algorithm, might get trapped into local minima if not properly initialized and the initialization of this algorithm is done randomly. In this paper, we propose a novel approach to improve initial cluster selec…
▽ More
Clustering is one of the widely used techniques to find out patterns from a dataset that can be applied in different applications or analyses. K-means, the most popular and simple clustering algorithm, might get trapped into local minima if not properly initialized and the initialization of this algorithm is done randomly. In this paper, we propose a novel approach to improve initial cluster selection for K-means algorithm. This algorithm is based on the fact that the initial centroids must be well separated from each other since the final clusters are separated groups in feature space. The Convex Hull algorithm facilitates the computing of the first two centroids and the remaining ones are selected according to the distance from previously selected centers. To ensure the selection of one center per cluster, we use the nearest neighbor technique. To check the robustness of our proposed algorithm, we consider several real-world datasets. We obtained only 7.33%, 7.90%, and 0% clustering error in Iris, Letter, and Ruspini data respectively which proves better performance than other existing systems. The results indicate that our proposed method outperforms the conventional K means approach by accelerating the computation when the number of clusters is greater than 2.
△ Less
Submitted 17 October, 2022;
originally announced October 2022.
-
DEPTWEET: A Typology for Social Media Texts to Detect Depression Severities
Authors:
Mohsinul Kabir,
Tasnim Ahmed,
Md. Bakhtiar Hasan,
Md Tahmid Rahman Laskar,
Tarun Kumar Joarder,
Hasan Mahmud,
Kamrul Hasan
Abstract:
Mental health research through data-driven methods has been hindered by a lack of standard typology and scarcity of adequate data. In this study, we leverage the clinical articulation of depression to build a typology for social media texts for detecting the severity of depression. It emulates the standard clinical assessment procedure Diagnostic and Statistical Manual of Mental Disorders (DSM-5)…
▽ More
Mental health research through data-driven methods has been hindered by a lack of standard typology and scarcity of adequate data. In this study, we leverage the clinical articulation of depression to build a typology for social media texts for detecting the severity of depression. It emulates the standard clinical assessment procedure Diagnostic and Statistical Manual of Mental Disorders (DSM-5) and Patient Health Questionnaire (PHQ-9) to encompass subtle indications of depressive disorders from tweets. Along with the typology, we present a new dataset of 40191 tweets labeled by expert annotators. Each tweet is labeled as 'non-depressed' or 'depressed'. Moreover, three severity levels are considered for 'depressed' tweets: (1) mild, (2) moderate, and (3) severe. An associated confidence score is provided with each label to validate the quality of annotation. We examine the quality of the dataset via representing summary statistics while setting strong baseline results using attention-based models like BERT and DistilBERT. Finally, we extensively address the limitations of the study to provide directions for further research.
△ Less
Submitted 10 October, 2022;
originally announced October 2022.
-
Auxilio: A Sensor-Based Wireless Head-Mounted Mouse for People with Upper Limb Disability
Authors:
Mohammad Ridwan Kabir,
Mohammad Ishrak Abedin,
Rizvi Ahmed,
Saad Bin Ashraf,
Hasan Mahmud,
Md. Kamrul Hasan
Abstract:
Upper limb disability may be caused either due to accidents, neurological disorders, or even birth defects, imposing limitations and restrictions on the interaction with a computer for the concerned individuals using a generic optical mouse. Our work proposes the design and development of a working prototype of a sensor-based wireless head-mounted Assistive Mouse Controller (AMC), Auxilio, facilit…
▽ More
Upper limb disability may be caused either due to accidents, neurological disorders, or even birth defects, imposing limitations and restrictions on the interaction with a computer for the concerned individuals using a generic optical mouse. Our work proposes the design and development of a working prototype of a sensor-based wireless head-mounted Assistive Mouse Controller (AMC), Auxilio, facilitating interaction with a computer for people with upper limb disability. Combining commercially available, low-cost motion and infrared sensors, Auxilio solely utilizes head and cheek movements for mouse control. Its performance has been juxtaposed with that of a generic optical mouse in different pointing tasks as well as in ty** tasks, using a virtual keyboard. Furthermore, our work also analyzes the usability of Auxilio, featuring the System Usability Scale. The results of different experiments reveal the practicality and effectiveness of Auxilio as a head-mounted AMC for empowering the upper limb disabled community.
△ Less
Submitted 10 October, 2022;
originally announced October 2022.
-
Evolution of an ultracold gas in a non-Abelian gauge fields: Finite temperature effect
Authors:
Mehedi Hasan,
Chetan Sriram Madasu,
Ketan D. Rathod,
Chang Chi Kwong,
David Wilkowski
Abstract:
We detail the cooling mechanisms of a Fermionic strontium-87 gas in order to study its evolution under a non-Abelian gauge field. In contrast to our previous work reported in Ref. [1], we emphasize here on the finite temperature effect of the gas. In addition, we provide the detail characterization for the efficiency of atoms loading in the cross-dipole trap, the quantitative performance of the ev…
▽ More
We detail the cooling mechanisms of a Fermionic strontium-87 gas in order to study its evolution under a non-Abelian gauge field. In contrast to our previous work reported in Ref. [1], we emphasize here on the finite temperature effect of the gas. In addition, we provide the detail characterization for the efficiency of atoms loading in the cross-dipole trap, the quantitative performance of the evaporative cooling, and the characterization of a degenerate Fermi gas using a Thomas-Fermi distribution.
△ Less
Submitted 21 September, 2022;
originally announced September 2022.
-
A Deep Learning Approach for Parallel Imaging and Compressed Sensing MRI Reconstruction
Authors:
Farhan Sadik,
Md. Kamrul Hasan
Abstract:
Parallel imaging accelerates MRI data acquisition by acquiring additional sensitivity information with an array of receiver coils, resulting in fewer phase encoding steps. Because of fewer data requirements than parallel imaging, compressed sensing magnetic resonance imaging (CS-MRI) has gained popularity in the field of medical imaging. Parallel imaging and compressed sensing (CS) both reduce the…
▽ More
Parallel imaging accelerates MRI data acquisition by acquiring additional sensitivity information with an array of receiver coils, resulting in fewer phase encoding steps. Because of fewer data requirements than parallel imaging, compressed sensing magnetic resonance imaging (CS-MRI) has gained popularity in the field of medical imaging. Parallel imaging and compressed sensing (CS) both reduce the amount of data captured in the k-space, which speeds up traditional MRI acquisition. As acquisition time is inversely proportional to sample count, forming an image from reduced k-space samples results in faster acquisition but with aliasing artifacts. For de-aliasing the reconstructed image, this paper proposes a novel Generative Adversarial Network (GAN) called RECGAN-GR that is supervised with multi-modal losses. In comparison to existing GAN networks, our proposed method introduces a novel generator network, RemU-Net, which is integrated with dual-domain loss functions such as weighted magnitude and phase loss functions, as well as parallel imaging-based loss, GRAPPA consistency loss. As refinement learning, a k-space correction block is proposed to make the GAN network self-resistant to generating unnecessary data, which speeds up the reconstruction process. Comprehensive results show that the proposed RECGAN-GR not only improves the PSNR by 4 dB over GAN-based methods but also by 2 dB over conventional state-of-the-art CNN methods available in the literature for single-coil data. The proposed work significantly improves image quality for low-retained data, resulting in five to ten times faster acquisition.
△ Less
Submitted 17 December, 2022; v1 submitted 19 September, 2022;
originally announced September 2022.
-
Traffic Congestion Prediction using Deep Convolutional Neural Networks: A Color-coding Approach
Authors:
Mirza Fuad Adnan,
Nadim Ahmed,
Imrez Ishraque,
Md. Sifath Al Amin,
Md. Sumit Hasan
Abstract:
The traffic video data has become a critical factor in confining the state of traffic congestion due to the recent advancements in computer vision. This work proposes a unique technique for traffic video classification using a color-coding scheme before training the traffic data in a Deep convolutional neural network. At first, the video data is transformed into an imagery data set; then, the vehi…
▽ More
The traffic video data has become a critical factor in confining the state of traffic congestion due to the recent advancements in computer vision. This work proposes a unique technique for traffic video classification using a color-coding scheme before training the traffic data in a Deep convolutional neural network. At first, the video data is transformed into an imagery data set; then, the vehicle detection is performed using the You Only Look Once algorithm. A color-coded scheme has been adopted to transform the imagery dataset into a binary image dataset. These binary images are fed to a Deep Convolutional Neural Network. Using the UCSD dataset, we have obtained a classification accuracy of 98.2%.
△ Less
Submitted 16 September, 2022;
originally announced September 2022.
-
Multiple Object Tracking in Recent Times: A Literature Review
Authors:
Mk Bashar,
Samia Islam,
Kashifa Kawaakib Hussain,
Md. Bakhtiar Hasan,
A. B. M. Ashikur Rahman,
Md. Hasanul Kabir
Abstract:
Multiple object tracking gained a lot of interest from researchers in recent years, and it has become one of the trending problems in computer vision, especially with the recent advancement of autonomous driving. MOT is one of the critical vision tasks for different issues like occlusion in crowded scenes, similar appearance, small object detection difficulty, ID switching, etc. To tackle these ch…
▽ More
Multiple object tracking gained a lot of interest from researchers in recent years, and it has become one of the trending problems in computer vision, especially with the recent advancement of autonomous driving. MOT is one of the critical vision tasks for different issues like occlusion in crowded scenes, similar appearance, small object detection difficulty, ID switching, etc. To tackle these challenges, as researchers tried to utilize the attention mechanism of transformer, interrelation of tracklets with graph convolutional neural network, appearance similarity of objects in different frames with the siamese network, they also tried simple IOU matching based CNN network, motion prediction with LSTM. To take these scattered techniques under an umbrella, we have studied more than a hundred papers published over the last three years and have tried to extract the techniques that are more focused on by researchers in recent times to solve the problems of MOT. We have enlisted numerous applications, possibilities, and how MOT can be related to real life. Our review has tried to show the different perspectives of techniques that researchers used overtimes and give some future direction for the potential researchers. Moreover, we have included popular benchmark datasets and metrics in this review.
△ Less
Submitted 11 September, 2022;
originally announced September 2022.
-
Dynamics of Hot QCD Matter -- Current Status and Developments
Authors:
Santosh K. Das,
Prabhakar Palni,
Jhuma Sannigrahi,
Jan-e Alam,
Cho Win Aung,
Yoshini Bailung,
Debjani Banerjee,
Gergely Gábor Barnaföldi,
Subash Chandra Behera,
Partha Pratim Bhaduri,
Samapan Bhadury,
Rajesh Biswas,
Pritam Chakraborty,
Vinod Chandra,
Prottoy Das,
Sadhana Dash,
Saumen Datta,
Sudipan De,
Vaishnavi Desai,
Suman Deb,
Debarshi Dey,
Jayanta Dey,
Sabyasachi Ghosh,
Najmul Haque,
Mujeeb Hasan
, et al. (42 additional authors not shown)
Abstract:
The discovery and characterization of hot and dense QCD matter, known as Quark Gluon Plasma (QGP), remains the most international collaborative effort and synergy between theorists and experimentalists in modern nuclear physics to date. The experimentalists around the world not only collect an unprecedented amount of data in heavy-ion collisions, at Relativistic Heavy Ion Collider (RHIC), at Brook…
▽ More
The discovery and characterization of hot and dense QCD matter, known as Quark Gluon Plasma (QGP), remains the most international collaborative effort and synergy between theorists and experimentalists in modern nuclear physics to date. The experimentalists around the world not only collect an unprecedented amount of data in heavy-ion collisions, at Relativistic Heavy Ion Collider (RHIC), at Brookhaven National Laboratory (BNL) in New York, USA, and the Large Hadron Collider (LHC), at CERN in Geneva, Switzerland but also analyze these data to unravel the mystery of this new phase of matter that filled a few microseconds old universe, just after the Big Bang. In the meantime, advancements in theoretical works and computing capability extend our wisdom about the hot-dense QCD matter and its dynamics through mathematical equations. The exchange of ideas between experimentalists and theoreticians is crucial for the progress of our knowledge. The motivation of this first conference named "HOT QCD Matter 2022" is to bring the community together to have a discourse on this topic. In this article, there are 36 sections discussing various topics in the field of relativistic heavy-ion collisions and related phenomena that cover a snapshot of the current experimental observations and theoretical progress. This article begins with the theoretical overview of relativistic spin-hydrodynamics in the presence of the external magnetic field, followed by the Lattice QCD results on heavy quarks in QGP, and finally, it ends with an overview of experiment results.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
A survey, review, and future trends of skin lesion segmentation and classification
Authors:
Md. Kamrul Hasan,
Md. Asif Ahamad,
Choon Hwai Yap,
Guang Yang
Abstract:
The Computer-aided Diagnosis or Detection (CAD) approach for skin lesion analysis is an emerging field of research that has the potential to alleviate the burden and cost of skin cancer screening. Researchers have recently indicated increasing interest in develo** such CAD systems, with the intention of providing a user-friendly tool to dermatologists to reduce the challenges encountered or asso…
▽ More
The Computer-aided Diagnosis or Detection (CAD) approach for skin lesion analysis is an emerging field of research that has the potential to alleviate the burden and cost of skin cancer screening. Researchers have recently indicated increasing interest in develo** such CAD systems, with the intention of providing a user-friendly tool to dermatologists to reduce the challenges encountered or associated with manual inspection. This article aims to provide a comprehensive literature survey and review of a total of 594 publications (356 for skin lesion segmentation and 238 for skin lesion classification) published between 2011 and 2022. These articles are analyzed and summarized in a number of different ways to contribute vital information regarding the methods for the development of CAD systems. These ways include relevant and essential definitions and theories, input data (dataset utilization, preprocessing, augmentations, and fixing imbalance problems), method configuration (techniques, architectures, module frameworks, and losses), training tactics (hyperparameter settings), and evaluation criteria. We intend to investigate a variety of performance-enhancing approaches, including ensemble and post-processing. We also discuss these dimensions to reveal their current trends based on utilization frequencies. In addition, we highlight the primary difficulties associated with evaluating skin lesion segmentation and classification systems using minimal datasets, as well as the potential solutions to these difficulties. Findings, recommendations, and trends are disclosed to inform future research on develo** an automated and robust CAD system for skin lesion analysis.
△ Less
Submitted 2 February, 2023; v1 submitted 25 August, 2022;
originally announced August 2022.
-
Robust Node Classification on Graphs: Jointly from Bayesian Label Transition and Topology-based Label Propagation
Authors:
Jun Zhuang,
Mohammad Al Hasan
Abstract:
Node classification using Graph Neural Networks (GNNs) has been widely applied in various real-world scenarios. However, in recent years, compelling evidence emerges that the performance of GNN-based node classification may deteriorate substantially by topological perturbation, such as random connections or adversarial attacks. Various solutions, such as topological denoising methods and mechanism…
▽ More
Node classification using Graph Neural Networks (GNNs) has been widely applied in various real-world scenarios. However, in recent years, compelling evidence emerges that the performance of GNN-based node classification may deteriorate substantially by topological perturbation, such as random connections or adversarial attacks. Various solutions, such as topological denoising methods and mechanism design methods, have been proposed to develop robust GNN-based node classifiers but none of these works can fully address the problems related to topological perturbations. Recently, the Bayesian label transition model is proposed to tackle this issue but its slow convergence may lead to inferior performance. In this work, we propose a new label inference model, namely LInDT, which integrates both Bayesian label transition and topology-based label propagation for improving the robustness of GNNs against topological perturbations. LInDT is superior to existing label transition methods as it improves the label prediction of uncertain nodes by utilizing neighborhood-based label propagation leading to better convergence of label inference. Besides, LIndT adopts asymmetric Dirichlet distribution as a prior, which also helps it to improve label inference. Extensive experiments on five graph datasets demonstrate the superiority of LInDT for GNN-based node classification under three scenarios of topological perturbations.
△ Less
Submitted 20 August, 2022;
originally announced August 2022.
-
A review of cryptosystems based on multi layer chaotic map**s
Authors:
Awnon Bhowmik,
Emon Hossain,
Mahmudul Hasan
Abstract:
In recent years, a lot of research has gone into creating multi-layer chaotic map**-based cryptosystems. Random-like behavior, a continuous broadband power spectrum, and a weak baseline condition dependency are all characteristics of chaotic systems. Chaos could be helpful in the three functional components of compression, encryption, and modulation in a digital communication system. To successf…
▽ More
In recent years, a lot of research has gone into creating multi-layer chaotic map**-based cryptosystems. Random-like behavior, a continuous broadband power spectrum, and a weak baseline condition dependency are all characteristics of chaotic systems. Chaos could be helpful in the three functional components of compression, encryption, and modulation in a digital communication system. To successfully use chaos theory in cryptography, chaotic maps must be built in such a way that the entropy they produce can provide the necessary confusion and diffusion. A chaotic map is used in the first layer of such cryptosystems to create confusion, and a second chaotic map is used in the second layer to create diffusion and create a ciphertext from a plaintext. A secret key generation mechanism and a key exchange method are frequently left out, and many researchers just assume that these essential components of any effective cryptosystem are always accessible. We review such cryptosystems by using a cryptosystem of our design, in which confusion in plaintext is created using Arnold's Cat Map, and logistic map** is employed to create sufficient dispersion and ultimately get a matching ciphertext. We also address the development of key exchange protocols and secret key schemes for these cryptosystems, as well as the possible outcomes of using cryptanalysis techniques on such a system.
△ Less
Submitted 17 July, 2022;
originally announced August 2022.
-
Ellipsis: Towards Efficient System Auditing for Real-Time Systems
Authors:
Ayoosh Bansal,
Anant Kandikuppa,
Chien-Ying Chen,
Monowar Hasan,
Adam Bates,
Sibin Mohan
Abstract:
System auditing is a powerful tool that provides insight into the nature of suspicious events in computing systems, allowing machine operators to detect and subsequently investigate security incidents. While auditing has proven invaluable to the security of traditional computers, existing audit frameworks are rarely designed with consideration for Real-Time Systems (RTS). The transparency provided…
▽ More
System auditing is a powerful tool that provides insight into the nature of suspicious events in computing systems, allowing machine operators to detect and subsequently investigate security incidents. While auditing has proven invaluable to the security of traditional computers, existing audit frameworks are rarely designed with consideration for Real-Time Systems (RTS). The transparency provided by system auditing would be of tremendous benefit in a variety of security-critical RTS domains, (e.g., autonomous vehicles); however, if audit mechanisms are not carefully integrated into RTS, auditing can be rendered ineffectual and violate the real-world temporal requirements of the RTS.
In this paper, we demonstrate how to adapt commodity audit frameworks to RTS. Using Linux Audit as a case study, we first demonstrate that the volume of audit events generated by commodity frameworks is unsustainable within the temporal and resource constraints of real-time (RT) applications. To address this, we present Ellipsis, a set of kernel-based reduction techniques that leverage the periodic repetitive nature of RT applications to aggressively reduce the costs of system-level auditing. Ellipsis generates succinct descriptions of RT applications' expected activity while retaining a detailed record of unexpected activities, enabling analysis of suspicious activity while meeting temporal constraints. Our evaluation of Ellipsis, using ArduPilot (an open-source autopilot application suite) demonstrates up to 93% reduction in audit log generation.
△ Less
Submitted 4 August, 2022;
originally announced August 2022.
-
A Bayesian hierarchical framework for emulating a complex crop yield simulator
Authors:
Muhammad Mahmudul Hasan,
Jonathan Andrew Cumming
Abstract:
Emulation of complex computer simulations have become an effective tool in the exploration of the behaviour of the simulated processes. Agriculture is one such area where the simulation of crop growth, nutrition, soil condition and pollution could be invaluable in any land management decisions. In this paper, we study output from the EPIC simulation model to investigate the behaviour of crop yield…
▽ More
Emulation of complex computer simulations have become an effective tool in the exploration of the behaviour of the simulated processes. Agriculture is one such area where the simulation of crop growth, nutrition, soil condition and pollution could be invaluable in any land management decisions. In this paper, we study output from the EPIC simulation model to investigate the behaviour of crop yield in response to changes in inputs such as fertilizer levels, soil, steepness, and other environmental covariates. We build a model for crop yield around a non-linear Mitscherlich Baule growth model to make inferences about the response of crop yield to changes continuous input variables (fertiliser levels), as well as exploring the impact of categorical factor inputs such as land steepness and soil type. A Bayesian hierarchical approach to the modelling was taking for mixed inputs, requiring Markov Chain Monte Carlo simulations to obtain samples from the posterior distributions, to validate and illustrate the results, and to carry out model selection. Our results highlight a strong response of yield to nitrogen, but surprisingly a weak response to phosphorus and also shows the substantial improvement of the model after adding factor effects response to maximum yield for this particular simulator configuration and catchment.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Evidence for electronic signature of magnetic transition in topological magnet HoSbTe
Authors:
Nana Shumiya,
Jia-Xin Yin,
Guoqing Chang,
Meng Yang,
Sougata Mardanya,
Tay-Rong Chang,
Hsin Lin,
Md Shafayat Hossain,
Yu-Xiao Jiang,
Tyler A. Cochran,
Qi Zhang,
Xian P. Yang,
Youguo Shi,
M. Zahid Hasan
Abstract:
Topological insulators with intrinsic magnetic order are emerging as an exciting platform to realize fundamentally new excitations from topological quantum states of matter. To study these systems and their physics, people have proposed a variety of magnetic topological insulator systems, including HoSbTe, an antiferromagnetic weak topological insulator candidate. In this work, we use scanning tun…
▽ More
Topological insulators with intrinsic magnetic order are emerging as an exciting platform to realize fundamentally new excitations from topological quantum states of matter. To study these systems and their physics, people have proposed a variety of magnetic topological insulator systems, including HoSbTe, an antiferromagnetic weak topological insulator candidate. In this work, we use scanning tunneling microscopy to probe the electronic structure of HoSbTe with antiferromagnetic and ferromagnetic orders that are tuned by applying an external magnetic field. Although around the Fermi energy, we find minor differences between the quasi-particle interferences under the ferromagnetic and antiferromagnetic orders, deep inside the valance region, a new quasi-particle interference signal emerges with ferromagnetism. This observation is consistent with our first-principles calculations indicating the magnetism-driven transition of the electronic states in this spin-orbit coupled topological magnet.
△ Less
Submitted 21 July, 2022;
originally announced July 2022.
-
EVHA: Explainable Vision System for Hardware Testing and Assurance -- An Overview
Authors:
Md Mahfuz Al Hasan,
Mohammad Tahsin Mostafiz,
Thomas An Le,
Jake Julia,
Nidish Vashistha,
Shayan Taheri,
Navid Asadizanjani
Abstract:
Due to the ever-growing demands for electronic chips in different sectors the semiconductor companies have been mandated to offshore their manufacturing processes. This unwanted matter has made security and trustworthiness of their fabricated chips concerning and caused creation of hardware attacks. In this condition, different entities in the semiconductor supply chain can act maliciously and exe…
▽ More
Due to the ever-growing demands for electronic chips in different sectors the semiconductor companies have been mandated to offshore their manufacturing processes. This unwanted matter has made security and trustworthiness of their fabricated chips concerning and caused creation of hardware attacks. In this condition, different entities in the semiconductor supply chain can act maliciously and execute an attack on the design computing layers, from devices to systems. Our attack is a hardware Trojan that is inserted during mask generation/fabrication in an untrusted foundry. The Trojan leaves a footprint in the fabricated through addition, deletion, or change of design cells. In order to tackle this problem, we propose Explainable Vision System for Hardware Testing and Assurance (EVHA) in this work that can detect the smallest possible change to a design in a low-cost, accurate, and fast manner. The inputs to this system are Scanning Electron Microscopy (SEM) images acquired from the Integrated Circuits (ICs) under examination. The system output is determination of IC status in terms of having any defect and/or hardware Trojan through addition, deletion, or change in the design cells at the cell-level. This article provides an overview on the design, development, implementation, and analysis of our defense system.
△ Less
Submitted 19 July, 2022;
originally announced July 2022.
-
Understanding Mechanical Characteristics of FeNiCrCoCu HEA in Nanoscale Laser Powder Bed Fusion via Molecular Dynamics
Authors:
Ishat Raihan Jamil,
Ali Muhit Mustaquim,
Mahmudul Islam,
Mohammad Nasim Hasan
Abstract:
The concept of alloying multiple principal elements at high concentrations has led to the development of High Entropy Alloys (HEAs) with exceptional mechanical properties, making them the focus of major recent scientific endeavors. Geometrically complex HEAs with tailored microstructural characteristics can be produced using additive manufacturing technologies such as powder bed fusion (PBF). Howe…
▽ More
The concept of alloying multiple principal elements at high concentrations has led to the development of High Entropy Alloys (HEAs) with exceptional mechanical properties, making them the focus of major recent scientific endeavors. Geometrically complex HEAs with tailored microstructural characteristics can be produced using additive manufacturing technologies such as powder bed fusion (PBF). However, an in-depth study on the effect of process thermal conditions during PBF is required to effectively fabricate HEAs with desirable mechanical characteristics. Thus, in our present molecular dynamic (MD) study we have explored the implication of PBF process thermal conditions on the mechanical characteristics of FeNiCrCoCu HEA by systematically varying laser scan speed from 0.4 Å/ps to 0.1 Å/ps, unidirectional and reversing laser passes from 1 to 4, and laser power from 100 microwatts to 220 microwatts. Our investigation suggests that reducing the laser scanning speed up to a critical velocity of 0.2 Å/ps considerably improves mechanical strengths, with further reduction creating severe surface defects. Decreased ultimate tensile strength (UTS) is associated with the annihilation of the bulk sessile dislocations during tensile straining marking an early yield failure. Alternately, the material's strength could be improved by annealing with several unidirectional laser passes over the same target region, resulting in enhanced UTS due to subtler yield points. Increasing laser power aids in ameliorating material density ultimately leading to higher UTS even in non-dislocation-free structures. These findings will assist researchers to understand the underlying effects and optimize process thermal parameters to fabricate superior HEAs utilizing additive manufacturing.
△ Less
Submitted 17 July, 2022;
originally announced July 2022.
-
Node Graph Optimization Using Differentiable Proxies
Authors:
Yiwei Hu,
Paul Guerrero,
Miloš Hašan,
Holly Rushmeier,
Valentin Deschaintre
Abstract:
Graph-based procedural materials are ubiquitous in content production industries. Procedural models allow the creation of photorealistic materials with parametric control for flexible editing of appearance. However, designing a specific material is a time-consuming process in terms of building a model and fine-tuning parameters. Previous work [Hu et al. 2022; Shi et al. 2020] introduced material g…
▽ More
Graph-based procedural materials are ubiquitous in content production industries. Procedural models allow the creation of photorealistic materials with parametric control for flexible editing of appearance. However, designing a specific material is a time-consuming process in terms of building a model and fine-tuning parameters. Previous work [Hu et al. 2022; Shi et al. 2020] introduced material graph optimization frameworks for matching target material samples. However, these previous methods were limited to optimizing differentiable functions in the graphs. In this paper, we propose a fully differentiable framework which enables end-to-end gradient based optimization of material graphs, even if some functions of the graph are non-differentiable. We leverage the Differentiable Proxy, a differentiable approximator of a non-differentiable black-box function. We use our framework to match structure and appearance of an output material to a target material, through a multi-stage differentiable optimization. Differentiable Proxies offer a more general optimization solution to material appearance matching than previous work.
△ Less
Submitted 15 July, 2022;
originally announced July 2022.
-
Z-Index at CheckThat! Lab 2022: Check-Worthiness Identification on Tweet Text
Authors:
Prerona Tarannum,
Firoj Alam,
Md. Arid Hasan,
Sheak Rashed Haider Noori
Abstract:
The wide use of social media and digital technologies facilitates sharing various news and information about events and activities. Despite sharing positive information misleading and false information is also spreading on social media. There have been efforts in identifying such misleading information both manually by human experts and automatic tools. Manual effort does not scale well due to the…
▽ More
The wide use of social media and digital technologies facilitates sharing various news and information about events and activities. Despite sharing positive information misleading and false information is also spreading on social media. There have been efforts in identifying such misleading information both manually by human experts and automatic tools. Manual effort does not scale well due to the high volume of information, containing factual claims, are appearing online. Therefore, automatically identifying check-worthy claims can be very useful for human experts. In this study, we describe our participation in Subtask-1A: Check-worthiness of tweets (English, Dutch and Spanish) of CheckThat! lab at CLEF 2022. We performed standard preprocessing steps and applied different models to identify whether a given text is worthy of fact checking or not. We use the oversampling technique to balance the dataset and applied SVM and Random Forest (RF) with TF-IDF representations. We also used BERT multilingual (BERT-m) and XLM-RoBERTa-base pre-trained models for the experiments. We used BERT-m for the official submissions and our systems ranked as 3rd, 5th, and 12th in Spanish, Dutch, and English, respectively. In further experiments, our evaluation shows that transformer models (BERT-m and XLM-RoBERTa-base) outperform the SVM and RF in Dutch and English languages where a different scenario is observed for Spanish.
△ Less
Submitted 15 July, 2022;
originally announced July 2022.
-
MatFormer: A Generative Model for Procedural Materials
Authors:
Paul Guerrero,
Miloš Hašan,
Kalyan Sunkavalli,
Radomír Měch,
Tamy Boubekeur,
Niloy J. Mitra
Abstract:
Procedural material graphs are a compact, parameteric, and resolution-independent representation that are a popular choice for material authoring. However, designing procedural materials requires significant expertise and publicly accessible libraries contain only a few thousand such graphs. We present MatFormer, a generative model that can produce a diverse set of high-quality procedural material…
▽ More
Procedural material graphs are a compact, parameteric, and resolution-independent representation that are a popular choice for material authoring. However, designing procedural materials requires significant expertise and publicly accessible libraries contain only a few thousand such graphs. We present MatFormer, a generative model that can produce a diverse set of high-quality procedural materials with complex spatial patterns and appearance. While procedural materials can be modeled as directed (operation) graphs, they contain arbitrary numbers of heterogeneous nodes with unstructured, often long-range node connections, and functional constraints on node parameters and connections. MatFormer addresses these challenges with a multi-stage transformer-based model that sequentially generates nodes, node parameters, and edges, while ensuring the semantic validity of the graph. In addition to generation, MatFormer can be used for the auto-completion and exploration of partial material graphs. We qualitatively and quantitatively demonstrate that our method outperforms alternative approaches, in both generated graph and material quality.
△ Less
Submitted 15 August, 2022; v1 submitted 3 July, 2022;
originally announced July 2022.
-
PhotoScene: Photorealistic Material and Lighting Transfer for Indoor Scenes
Authors:
Yu-Ying Yeh,
Zhengqin Li,
Yannick Hold-Geoffroy,
Rui Zhu,
Zexiang Xu,
Miloš Hašan,
Kalyan Sunkavalli,
Manmohan Chandraker
Abstract:
Most indoor 3D scene reconstruction methods focus on recovering 3D geometry and scene layout. In this work, we go beyond this to propose PhotoScene, a framework that takes input image(s) of a scene along with approximately aligned CAD geometry (either reconstructed automatically or manually specified) and builds a photorealistic digital twin with high-quality materials and similar lighting. We mod…
▽ More
Most indoor 3D scene reconstruction methods focus on recovering 3D geometry and scene layout. In this work, we go beyond this to propose PhotoScene, a framework that takes input image(s) of a scene along with approximately aligned CAD geometry (either reconstructed automatically or manually specified) and builds a photorealistic digital twin with high-quality materials and similar lighting. We model scene materials using procedural material graphs; such graphs represent photorealistic and resolution-independent materials. We optimize the parameters of these graphs and their texture scale and rotation, as well as the scene lighting to best match the input image via a differentiable rendering layer. We evaluate our technique on objects and layout reconstructions from ScanNet, SUN RGB-D and stock photographs, and demonstrate that our method reconstructs high-quality, fully relightable 3D scenes that can be re-rendered under arbitrary viewpoints, zooms and lighting.
△ Less
Submitted 2 July, 2022;
originally announced July 2022.
-
Controlling Material Appearance by Examples
Authors:
Yiwei Hu,
Miloš Hašan,
Paul Guerrero,
Holly Rushmeier,
Valentin Deschaintre
Abstract:
Despite the ubiquitousness of materials maps in modern rendering pipelines, their editing and control remains a challenge. In this paper, we present an example-based material control method to augment input material maps based on user-provided material photos. We train a tileable version of MaterialGAN and leverage its material prior to guide the appearance transfer, optimizing its latent space us…
▽ More
Despite the ubiquitousness of materials maps in modern rendering pipelines, their editing and control remains a challenge. In this paper, we present an example-based material control method to augment input material maps based on user-provided material photos. We train a tileable version of MaterialGAN and leverage its material prior to guide the appearance transfer, optimizing its latent space using differentiable rendering. Our method transfers the micro and meso-structure textures of user provided target(s) photographs, while preserving the structure of the input and quality of the input material. We show our methods can control existing material maps, increasing realism or generating new, visually appealing materials.
△ Less
Submitted 29 June, 2022;
originally announced June 2022.
-
A Proposed Bi-LSTM Method to Fake News Detection
Authors:
Taminul Islam,
MD Alamin Hosen,
Akhi Mony,
MD Touhid Hasan,
Israt Jahan,
Arindom Kundu
Abstract:
Recent years have seen an explosion in social media usage, allowing people to connect with others. Since the appearance of platforms such as Facebook and Twitter, such platforms influence how we speak, think, and behave. This problem negatively undermines confidence in content because of the existence of fake news. For instance, false news was a determining factor in influencing the outcome of the…
▽ More
Recent years have seen an explosion in social media usage, allowing people to connect with others. Since the appearance of platforms such as Facebook and Twitter, such platforms influence how we speak, think, and behave. This problem negatively undermines confidence in content because of the existence of fake news. For instance, false news was a determining factor in influencing the outcome of the U.S. presidential election and other sites. Because this information is so harmful, it is essential to make sure we have the necessary tools to detect and resist it. We applied Bidirectional Long Short-Term Memory (Bi-LSTM) to determine if the news is false or real in order to showcase this study. A number of foreign websites and newspapers were used for data collection. After creating & running the model, the work achieved 84% model accuracy and 62.0 F1-macro scores with training data.
△ Less
Submitted 15 June, 2022;
originally announced June 2022.