-
Attention network forecasts time-to-failure in laboratory shear experiments
Authors:
Hope Jasperson,
David C. Bolton,
Paul Johnson,
Robert Guyer,
Chris Marone,
Maarten V. de Hoop
Abstract:
Rocks under stress deform by creep mechanisms that include formation and slip on small-scale internal cracks. Intragranular cracks and slip along grain contacts release energy as elastic waves termed acoustic emissions (AE). AEs are thought to contain predictive information that can be used for fault failure forecasting. Here we present a method using unsupervised classification and an attention n…
▽ More
Rocks under stress deform by creep mechanisms that include formation and slip on small-scale internal cracks. Intragranular cracks and slip along grain contacts release energy as elastic waves termed acoustic emissions (AE). AEs are thought to contain predictive information that can be used for fault failure forecasting. Here we present a method using unsupervised classification and an attention network to forecast labquakes using AE waveform features. Our data were generated in a laboratory setting using a biaxial shearing device with granular fault gouge intended to mimic the conditions of tectonic faults. Here we analyzed the temporal evolution of AEs generated throughout several hundred laboratory earthquake cycles. We used a Conscience Self-Organizing Map (CSOM) to perform topologically ordered vector quantization based on waveform properties. The resulting map was used to interactively cluster AEs. We examined the clusters over time to identify those with predictive ability. Finally, we used a variety of LSTM and attention-based networks to test the predictive power of the AE clusters. By tracking cumulative waveform features over the seismic cycle, the network is able to forecast the time-to-failure (TTF) of lab earthquakes. Our results show that analyzing the data to isolate predictive signals and using a more sophisticated network architecture are key to robustly forecasting labquakes. In the future, this method could be applied on tectonic faults monitor earthquakes and augment current early warning systems.
△ Less
Submitted 20 September, 2021; v1 submitted 12 December, 2019;
originally announced December 2019.
-
Plate motion in sheared granular fault system
Authors:
Ke Gao,
Robert A. Guyer,
Esteban Rougier,
Paul A. Johnson
Abstract:
Plate motion near the fault gouge layer, and the elastic interplay between the gouge layer and the plate under stick-slip conditions, is key to understanding the dynamics of sheared granular fault systems. Here, a two-dimensional implementation of the combined finite-discrete element method (FDEM), which merges the finite element method (FEM) and the discrete element method (DEM), is used to expli…
▽ More
Plate motion near the fault gouge layer, and the elastic interplay between the gouge layer and the plate under stick-slip conditions, is key to understanding the dynamics of sheared granular fault systems. Here, a two-dimensional implementation of the combined finite-discrete element method (FDEM), which merges the finite element method (FEM) and the discrete element method (DEM), is used to explicitly to simulate a sheared granular fault system. We focus on investigating the influence of normal load, driving shear velocity and plate stiffness on the velocities and displacements measured at locations on the upper and lower plates just adjacent to the gouge in the direction parallel to the shear direction (x direction). The simulations show that at slips the plate velocities are proportional to the normal load and may be inversely proportional to the square root of the plate's Young's modulus; whereas the driving shear velocity does not show distinct influence on the plate velocities. During stick phases, the velocities of the upper and lower plates are respectively slightly greater and slightly smaller than the half of the driving shear velocity, and are both in the same direction of shear. The shear strain rate of the gouge is calculated from this velocity difference between the upper and lower plate during stick phases and thus the gouge effective shear modulus can be calculated. The results show that the gouge effective shear modulus increases proportionally with normal load, while the influence of shear velocity and plate stiffness on gouge effective shear modulus is minor. The simulations address the dynamics of a laboratory scale fault gouge system and may help reveal the complexities of earthquake frictional dynamics.
△ Less
Submitted 14 November, 2019;
originally announced November 2019.
-
Machine Learning Reveals the State of Intermittent Frictional Dynamics in a Sheared Granular Fault
Authors:
C. X. Ren,
O. Dorostkar,
B. Rouet-Leduc,
C. Hulbert,
D. Strebel,
R. A. Guyer,
P. A. Johnson,
J. Carmeliet
Abstract:
Seismogenic plate boundaries are presumed to behave in a similar manner to a densely packed granular medium, where fault and blocks systems rapidly rearrange the distribution of forces within themselves, as particles do in slowly sheared granular systems. We use machine learning and show that statistical features of velocity signals from individual particles in a simulated sheared granular fault c…
▽ More
Seismogenic plate boundaries are presumed to behave in a similar manner to a densely packed granular medium, where fault and blocks systems rapidly rearrange the distribution of forces within themselves, as particles do in slowly sheared granular systems. We use machine learning and show that statistical features of velocity signals from individual particles in a simulated sheared granular fault contain information regarding the instantaneous global state of intermittent frictional stick-slip dynamics. We demonstrate that combining features built from the signals of more particles can improve the accuracy of the global model, and discuss the physical basis behind decrease in error. We show that the statistical features such as median and higher moments of the signals that represent the particle displacement in the direction of shearing are among the best predictive features. Our work provides novel insights into the applications of machine learning in studying frictional processes that take place in geophysical systems.
△ Less
Submitted 26 March, 2019;
originally announced March 2019.
-
From Stress Chains to Acoustic Emission
Authors:
Ke Gao,
Robert Guyer,
Esteban Rougier,
Christopher X. Ren,
Paul A. Johnson
Abstract:
A numerical scheme using the combined finite-discrete element methods (FDEM) is employed to study a model of an earthquake system comprising a granular layer embedded in a formation. When the formation is driven so as to shear the granular layer, a system of stress chains emerges. The stress chains endow the layer with resistance to shear and on failure launch broadcasts into the formation. These…
▽ More
A numerical scheme using the combined finite-discrete element methods (FDEM) is employed to study a model of an earthquake system comprising a granular layer embedded in a formation. When the formation is driven so as to shear the granular layer, a system of stress chains emerges. The stress chains endow the layer with resistance to shear and on failure launch broadcasts into the formation. These broadcasts, received as acoustic emission, provide a remote monitor of the state of the granular layer, of the earthquake system.
△ Less
Submitted 21 February, 2019;
originally announced February 2019.
-
Simulation of crack induced nonlinear elasticity using the combined finite-discrete element method
Authors:
Ke Gao,
Esteban Rougier,
Robert Guyer,
Zhou Lei,
Paul A. Johnson
Abstract:
Numerical simulation of nonlinear elastic wave propagation in solids with cracks is indispensable for decoding the complicated mechanisms associated with the nonlinear ultrasonic techniques in Non-Destructive Testing (NDT). Here, we introduce a two-dimensional implementation of the combined finite-discrete element method (FDEM), which merges the finite element method (FEM) and the discrete element…
▽ More
Numerical simulation of nonlinear elastic wave propagation in solids with cracks is indispensable for decoding the complicated mechanisms associated with the nonlinear ultrasonic techniques in Non-Destructive Testing (NDT). Here, we introduce a two-dimensional implementation of the combined finite-discrete element method (FDEM), which merges the finite element method (FEM) and the discrete element method (DEM), to explicitly simulate the crack induced nonlinear elasticity in solids with both horizontal and inclined cracks. In the FDEM model, the solid is discretized into finite elements to capture the wave propagation in the bulk material, and the finite elements along the two sides of the crack also behave as discrete elements to track the normal and tangential interactions between crack surfaces. The simulation results show that for cracked models, nonlinear elasticity is generated only when the excitation amplitude is large enough to trigger the contact between crack surfaces, and the nonlinear behavior is very sensitive to the crack surface contact. The simulations reveal the influence of normal and tangential contact on the nonlinear elasticity generation. Moreover, the results demonstrate the capabilities of FDEM for decoding the causality of nonlinear elasticity in cracked solid and its potential to assist in Non-Destructive Testing (NDT).
△ Less
Submitted 7 November, 2018;
originally announced November 2018.
-
Modeling of Stick-Slip Behavior in Sheared Granular Fault Gouge Using the Combined Finite-Discrete Element Method
Authors:
Ke Gao,
Bryan J. Euser,
Esteban Rougier,
Robert A. Guyer,
Zhou Lei,
Earl E. Knight,
Jan Carmeliet,
Paul A. Johnson
Abstract:
Sheared granular layers undergoing stick slip behavior are broadly employed to study the physics and dynamics of earthquakes. Here, a two dimensional implementation of the combined finite discrete element method (FDEM), which merges the finite element method (FEM) and the discrete element method (DEM), is used to explicitly simulate a sheared granular fault system including both gouge and plate, a…
▽ More
Sheared granular layers undergoing stick slip behavior are broadly employed to study the physics and dynamics of earthquakes. Here, a two dimensional implementation of the combined finite discrete element method (FDEM), which merges the finite element method (FEM) and the discrete element method (DEM), is used to explicitly simulate a sheared granular fault system including both gouge and plate, and to investigate the influence of different normal loads on seismic moment, macroscopic friction coefficient, kinetic energy, gouge layer thickness, and recurrence time between slips. In the FDEM model, the deformation of plates and particles is simulated using the FEM formulation while particle particle and particle plate interactions are modeled using DEM derived techniques. The simulated seismic moment distributions are generally consistent with those obtained from the laboratory experiments. In addition, the simulation results demonstrate that with increasing normal load, (i) the kinetic energy of the granular fault system increases; (ii) the gouge layer thickness shows a decreasing trend; and (iii) the macroscopic friction coefficient does not experience much change. Analyses of the slip events reveal that, as the normal load increases, more slip events with large kinetic energy release and longer recurrence time occur, and the magnitude of gouge layer thickness decrease also tends to be larger; while the macroscopic friction coefficient drop decreases. The simulations not only reveal the influence of normal loads on the dynamics of sheared granular fault gouge, but also demonstrate the capabilities of FDEM for studying stick slip dynamic behavior of granular fault systems.
△ Less
Submitted 15 May, 2018; v1 submitted 4 April, 2018;
originally announced April 2018.
-
Estimating Fault Friction from Seismic Signals in the Laboratory
Authors:
Bertrand Rouet-Leduc,
Claudia Hulbert,
David C. Bolton,
Christopher X. Ren,
Jacques Riviere,
Chris Marone,
Robert A. Guyer,
Paul A. Johnson
Abstract:
Nearly all aspects of earthquake rupture are controlled by the friction along the fault that progressively increases with tectonic forcing, but in general cannot be directly measured. We show that fault friction can be determined at any time, from the continuous seismic signal. In a classic laboratory experiment of repeating earthquakes, we find that the seismic signal follows a specific pattern w…
▽ More
Nearly all aspects of earthquake rupture are controlled by the friction along the fault that progressively increases with tectonic forcing, but in general cannot be directly measured. We show that fault friction can be determined at any time, from the continuous seismic signal. In a classic laboratory experiment of repeating earthquakes, we find that the seismic signal follows a specific pattern with respect to fault friction, allowing us to determine the fault's position within its failure cycle. Using machine learning, we show that instantaneous statistical characteristics of the seismic signal are a fingerprint of the fault zone shear stress and frictional state. Further analysis of this fingerprint leads to a simple equation of state quantitatively relating the seismic signal power and the friction on the fault. These results show that fault zone frictional characteristics and the state of stress in the surroundings of the fault can be inferred from seismic waves, at least in the laboratory.
△ Less
Submitted 18 January, 2018; v1 submitted 11 October, 2017;
originally announced October 2017.
-
Dynamic induced softening in frictional granular material investigated by DEM simulation
Authors:
Laure Lemrich,
Paul A. Johnson,
Robert Guyer,
** Jia,
Jan Carmeliet
Abstract:
A granular system composed of frictional glass beads is simulated using the Discrete Element Method. The inter-grain forces are based on the Hertz contact law in the normal direction with frictional tangential force. The dam** due to collision is also accounted for. Systems are loaded at various stresses and their quasi-static elastic moduli are characterized. Each system is subjected to an exte…
▽ More
A granular system composed of frictional glass beads is simulated using the Discrete Element Method. The inter-grain forces are based on the Hertz contact law in the normal direction with frictional tangential force. The dam** due to collision is also accounted for. Systems are loaded at various stresses and their quasi-static elastic moduli are characterized. Each system is subjected to an extensive dynamic testing protocol by measuring the resonant response to a broad range of AC drive amplitudes and frequencies via a set of diagnostic strains. The system, linear at small AC drive amplitudes has resonance frequencies that shift downward (i.e., modulus softening) with increased AC drive amplitude. Detailed testing shows that the slip** contact ratio does not contribute significantly to this dynamic modulus softening, but the coordination number is strongly correlated to this reduction. This suggests that the softening arises from the extended structural change via break and remake of contacts during the rearrangement of bead positions driven by the AC amplitude.
△ Less
Submitted 19 June, 2017;
originally announced June 2017.
-
Acoustically-induced slip in sheared granular layers: application to dynamic earthquake triggering
Authors:
Behrooz Ferdowsi,
Michele Griffa,
Robert A. Guyer,
Paul A. Johnson,
Chris Marone,
Jan Carmeliet
Abstract:
A fundamental mystery in earthquake physics is ``how can an earthquake be triggered by distant seismic sources?'' Here, we use discrete element method simulations of a granular layer, during stick-slip, that is subject to transient vibrational excitation to gain further insight into the physics of dynamic earthquake triggering. Using Coulomb friction law for grains interaction, we observe delayed…
▽ More
A fundamental mystery in earthquake physics is ``how can an earthquake be triggered by distant seismic sources?'' Here, we use discrete element method simulations of a granular layer, during stick-slip, that is subject to transient vibrational excitation to gain further insight into the physics of dynamic earthquake triggering. Using Coulomb friction law for grains interaction, we observe delayed triggering of slip in the granular gouge. We find that at a critical vibrational amplitude (strain) there is an abrupt transition from negligible time-advanced slip (clock advance) to full clock advance, {\it i.e.}, transient vibration and triggered slip are simultaneous. The critical strain is order of $10^{-6}$, similar to observations in the laboratory and in Earth. The transition is related to frictional weakening of the granular layer due to a dramatic decrease in coordination number and the weakening of the contact force network. Associated with this frictional weakening is a pronounced decrease in the elastic modulus of the layer. The study has important implications for mechanisms of triggered earthquakes and induced seismic events and points out the underlying processes in response of the fault gouge to dynamic transient stresses.
△ Less
Submitted 3 November, 2015; v1 submitted 16 July, 2015;
originally announced July 2015.
-
Effect of boundary vibration on the frictional behavior of a dense sheared granular layer
Authors:
B. Ferdowsi,
M. Griffa,
R. A. Guyer,
P. A. Johnson,
J. Carmeliet
Abstract:
We report results of 3D Discrete Element Method (DEM) simulations aiming at investigating the role of the boundary vibration in inducing frictional weakening in sheared granular layers. We study the role of different vibration amplitudes applied at various shear stress levels, for a granular layer in the stick-slip regime and in the steady-sliding regime. Results are reported in terms of friction…
▽ More
We report results of 3D Discrete Element Method (DEM) simulations aiming at investigating the role of the boundary vibration in inducing frictional weakening in sheared granular layers. We study the role of different vibration amplitudes applied at various shear stress levels, for a granular layer in the stick-slip regime and in the steady-sliding regime. Results are reported in terms of friction drops and kinetic energy release associated with frictional weakening events. We find that larger vibration amplitude induces larger frictional weakening events. The results show evidence of a threshold below which no induced frictional weakening takes place. Friction drop size is found to be dependent on the shear stress at the time of vibration. A significant increase in the ratio between the number of slip** contacts to the number of sticking contacts in the granular layer is observed for large vibration amplitudes. These vibration-induced contact rearrangements enhance particle mobilization and induces a friction drop and kinetic energy release. This observation provides some insight into the grain-scale mechanisms of frictional weakening by boundary vibration in a dense sheared granular layer. In addition to characterizing the basic physics of vibration induced shear weakening, we are attempting to understand how a fault fails in the earth under seismic wave forcing. This is the well know phenomenon of dynamic earthquake triggering. We believe that the granular physics are key to this understanding.
△ Less
Submitted 24 January, 2014;
originally announced January 2014.
-
Are megaquakes clustered?
Authors:
Eric G. Daub,
Eli Ben-Naim,
Robert A. Guyer,
Paul A. Johnson
Abstract:
We study statistical properties of the number of large earthquakes over the past century. We analyze the cumulative distribution of the number of earthquakes with magnitude larger than threshold M in time interval T, and quantify the statistical significance of these results by simulating a large number of synthetic random catalogs. We find that in general, the earthquake record cannot be distingu…
▽ More
We study statistical properties of the number of large earthquakes over the past century. We analyze the cumulative distribution of the number of earthquakes with magnitude larger than threshold M in time interval T, and quantify the statistical significance of these results by simulating a large number of synthetic random catalogs. We find that in general, the earthquake record cannot be distinguished from a process that is random in time. This conclusion holds whether aftershocks are removed or not, except at magnitudes below M = 7.3. At long time intervals (T = 2-5 years), we find that statistically significant clustering is present in the catalog for lower magnitude thresholds (M = 7-7.2). However, this clustering is due to a large number of earthquakes on record in the early part of the 20th century, when magnitudes are less certain.
△ Less
Submitted 5 March, 2012;
originally announced March 2012.