Showing 1–37 of 37 results for author: Guvenc, L

Optimisation of Nonlinear Spring and Damper Characteristics for Vehicle Ride and Handling Improvement

Authors: D. Ozcan, U. Sonmez, L. Guvenc, S . S. Ersolmaz, I. Y. Eyol

Abstract: In this paper, the optimum linear/nonlinear spring and linear/nonlinear damper force versus displacement and force versus velocity characteristic functions, respectively, are determined using simple lumped parameter models of a quarter car front independent suspension and a half car rear solid axle suspension of a light commercial vehicle. The complexity of a nonlinear function optimisation proble… ▽ More In this paper, the optimum linear/nonlinear spring and linear/nonlinear damper force versus displacement and force versus velocity characteristic functions, respectively, are determined using simple lumped parameter models of a quarter car front independent suspension and a half car rear solid axle suspension of a light commercial vehicle. The complexity of a nonlinear function optimisation problem is reduced by determining the shape a priori based on typical shapes supplied by the car manufacturer and then scaling it up or down in the optimisation process. The vehicle ride and handling responses are investigated considering models of increased complexity. The linear and nonlinear optimised spring characteristics are first obtained using lower complexity lumped parameter models. The commercial vehicle dynamics software Carmaker is then used in the optimisation as the higher complexity, more realistic model. The performance of the optimised suspension units are also verified using this more realistic Carmaker model. △ Less

Submitted 13 June, 2023; originally announced June 2023.

Cooperative Adaptive Cruise Control Design and Implementation

Authors: Mustafa Ridvan Cantas, Sukru Yaren Gelbal, Levent Guvenc, Bilin Aksun Guvenc

Abstract: In this manuscript a design and implementation of CACC on an autonomous vehicle platform (2017 Ford Fusion) is presented. The developed CACC controls the intervehicle distance between the target vehicle and ego vehicle using a feedforward PD controller. In this design the feedforward information is the acceleration of the target vehicle which is communicated through Dedicated Short-Range Communica… ▽ More In this manuscript a design and implementation of CACC on an autonomous vehicle platform (2017 Ford Fusion) is presented. The developed CACC controls the intervehicle distance between the target vehicle and ego vehicle using a feedforward PD controller. In this design the feedforward information is the acceleration of the target vehicle which is communicated through Dedicated Short-Range Communication (DSRC) modem. The manuscript explains the detailed architecture of the designed CACC with used hardware and methods for the both simulation and experiments. Also, an approach to overcome detection failures at the curved roads is presented to improve overall quality of the designed CACC system. As a result, the initial simulation and experimental results with the designed CACC system is presented in the paper. The presented results indicate that CACC improves the car following performance of the ego vehicle as compared to the classical Adaptive Cruise Controller. △ Less

Submitted 13 June, 2023; originally announced June 2023.

Use of Robust DOB/CDOB Compensation to Improve Autonomous Vehicle Path Following Performance in the Presence of Model Uncertainty, CAN Bus Delays and External Disturbances

Authors: Haoan Wang, Levent Guvenc

Abstract: A path tracking control system is chosen as the proof-of-concept demonstration application in this paper. A disturbance observer (DOB) is embedded within the steering to path error automated driving loop to handle uncertain parameters such as vehicle mass, vehicle velocities and road friction coefficient and to reject yaw moment disturbances. The compensation of vehicle model with the embedded dis… ▽ More A path tracking control system is chosen as the proof-of-concept demonstration application in this paper. A disturbance observer (DOB) is embedded within the steering to path error automated driving loop to handle uncertain parameters such as vehicle mass, vehicle velocities and road friction coefficient and to reject yaw moment disturbances. The compensation of vehicle model with the embedded disturbance observer forces it to behave like its nominal model within the bandwidth of the disturbance observer. A parameter space approach based steering controller is then used to optimize performance. The proposed method demonstrates good disturbance rejection and achieves stability robustness. The variable time delay from the steer-by-wire system in an actual vehicle can also lead to stability issues since it adds large negative phase angle to the plant frequency response and tends to destabilize it. A communication disturbance observer (CDOB) based time delay compensation approach that does not require exact knowledge of this time delay is embedded into the steering actuation loop to handle this problem. Stability analysis of both DOB and CDOB compensation system are presented in this paper. Extensive model-in-the-loop simulations were performed to test the designed disturbance observer and CDOB systems and show reduced path following errors in the presence of uncertainty, disturbances and time delay. A validated model of our 2017 Ford Fusion Hybrid research autonomous vehicle is used in the simulation analyses. Simulation results verify the performance enhancement of the vehicle path following control with proposed DOB and CDOB structure. A HiL simulator that uses a validated CarSim model with sensors and traffic will be used later to verify the real time capability of our approach. △ Less

Submitted 10 June, 2023; originally announced June 2023.

Comments: arXiv admin note: text overlap with arXiv:2306.01899

Impact of Different Desired Velocity Profiles and Controller Gains on Convoy Driveability of Cooperative Adaptive Cruise Control Operated Platoons

Authors: Santhosh Tamilarasan, Levent Guvenc

Abstract: As the development of autonomous vehicles rapidly advances, the use of convoying/platooning becomes a more widely explored technology option for saving fuel and increasing the efficiency of traffic. In cooperative adaptive cruise control (CACC), the vehicles in a convoy follow each other under adaptive cruise control (ACC) that is augmented by the sharing of preceding vehicle acceleration through… ▽ More As the development of autonomous vehicles rapidly advances, the use of convoying/platooning becomes a more widely explored technology option for saving fuel and increasing the efficiency of traffic. In cooperative adaptive cruise control (CACC), the vehicles in a convoy follow each other under adaptive cruise control (ACC) that is augmented by the sharing of preceding vehicle acceleration through the vehicle to vehicle communication in a feedforward control path. In general, the desired velocity optimization for vehicles in the convoy is based on fuel economy optimization, rather than driveability. This paper is a preliminary study on the impact of the desired velocity profile on the driveability characteristics of a convoy of vehicles and the controller gain impact on the driveability. A simple low-level longitudinal model of the vehicle has been used along with a PD type cruise controller and a generic spacing policy for ACC/CACC. The acceleration of the previous vehicle is available to the next vehicle as input, and the simulations are performed as Cooperative Adaptive Cruise Control of a convoy of vehicles. Individual vehicle acceleration profiles have been analyzed for driveability for two different velocity profiles that are followed in a stretch of 720 m between stop signs. The controller gains have been re-tuned based on the parameter space robust control PID approach for driveability and compared with the original gains. The US06 SFTP drive cycle has also been used for the comparison of the two different controller gain sets. △ Less

Submitted 2 June, 2023; originally announced June 2023.

Discrete-time Robust PD Controlled System with DOB/CDOB Compensation for High Speed Autonomous Vehicle Path Following

Authors: Haoan Wang, Levent Guvenc

Abstract: Autonomous vehicle path following performance is one of significant consideration. This paper presents discrete time design of robust PD controlled system with disturbance observer (DOB) and communication disturbance observer (CDOB) compensation to enhance autonomous vehicle path following performance. Although always implemented on digital devices, DOB and CDOB structure are usually designed in c… ▽ More Autonomous vehicle path following performance is one of significant consideration. This paper presents discrete time design of robust PD controlled system with disturbance observer (DOB) and communication disturbance observer (CDOB) compensation to enhance autonomous vehicle path following performance. Although always implemented on digital devices, DOB and CDOB structure are usually designed in continuous time in the literature and also in our previous work. However, it requires high sampling rate for continuous-time design block diagram to automatically convert to corresponding discrete-time controller using rapid controller prototy** systems. In this paper, direct discrete time design is carried out. Digital PD feedback controller is designed based on the nominal plant using the proposed parameter space approach. Zero order hold method is applied to discretize the nominal plant, DOB and CDOB structure in continuous domain. Discrete time DOB is embedded into the steering to path following error loop for model regulation in the presence of uncertainty in vehicle parameters such as vehicle mass, vehicle speed and road-tire friction coefficient and rejecting external disturbance like crosswind force. On the other hand, time delay from CAN bus based sensor and actuator command interfaces results in degradation of system performance since large negative phase angles are added to the plant frequency response. Discrete time CDOB compensated control system can be used for time delay compensation where the accurate knowledge of delay time value is not necessary. A validated model of our lab Ford Fusion hybrid automated driving research vehicle is used for the simulation analysis while the vehicle is driving at high speed. Simulation results successfully demonstrate the improvement of autonomous vehicle path following performance with the proposed discrete time DOB and CDOB structure. △ Less

Submitted 2 June, 2023; originally announced June 2023.

Cooperative Collision Avoidance in a Connected Vehicle Environment

Authors: Sukru Yaren Gelbal, Sheng Zhu, Gokul Arvind Anantharaman, Bilin Aksun Guvenc, Levent Guvenc

Abstract: Connected vehicle (CV) technology is among the most heavily researched areas in both the academia and industry. The vehicle to vehicle (V2V), vehicle to infrastructure (V2I) and vehicle to pedestrian (V2P) communication capabilities enable critical situational awareness. In some cases, these vehicle communication safety capabilities can overcome the shortcomings of other sensor safety capabilities… ▽ More Connected vehicle (CV) technology is among the most heavily researched areas in both the academia and industry. The vehicle to vehicle (V2V), vehicle to infrastructure (V2I) and vehicle to pedestrian (V2P) communication capabilities enable critical situational awareness. In some cases, these vehicle communication safety capabilities can overcome the shortcomings of other sensor safety capabilities because of external conditions such as 'No Line of Sight' (NLOS) or very harsh weather conditions. Connected vehicles will help cities and states reduce traffic congestion, improve fuel efficiency and improve the safety of the vehicles and pedestrians. On the road, cars will be able to communicate with one another, automatically transmitting data such as speed, position, and direction, and send alerts to each other if a crash seems imminent. The main focus of this paper is the implementation of Cooperative Collision Avoidance (CCA) for connected vehicles. It leverages the Vehicle to Everything (V2X) communication technology to create a real-time implementable collision avoidance algorithm along with decision-making for a vehicle that communicates with other vehicles. Four distinct collision risk environments are simulated on a cost effective Connected Autonomous Vehicle (CAV) Hardware in the Loop (HIL) simulator to test the overall algorithm in real-time with real electronic control and communication hardware. △ Less

Submitted 2 June, 2023; originally announced June 2023.

Hardware-in-the-Loop and Road Testing of RLVW and GLOSA Connected Vehicle Applications

Authors: Ozgenur Kavas-Torris, Mustafa Ridvan Cantas, Sukru Yaren Gelbal, Levent Guvenc

Abstract: This paper presents an evaluation of two different Vehicle to Infrastructure (V2I) applications, namely Red Light Violation Warning (RLVW) and Green Light Optimized Speed Advisory (GLOSA). The evaluation method is to first develop and use Hardware-in-the-Loop (HIL) simulator testing, followed by extension of the HIL testing to road testing using an experimental connected vehicle. The HIL simulator… ▽ More This paper presents an evaluation of two different Vehicle to Infrastructure (V2I) applications, namely Red Light Violation Warning (RLVW) and Green Light Optimized Speed Advisory (GLOSA). The evaluation method is to first develop and use Hardware-in-the-Loop (HIL) simulator testing, followed by extension of the HIL testing to road testing using an experimental connected vehicle. The HIL simulator used in the testing is a state-of-the-art simulator that consists of the same hardware like the road side unit and traffic cabinet as is used in real intersections and allows testing of numerous different traffic and intersection geometry and timing scenarios realistically. First, the RLVW V2I algorithm is tested in the HIL simulator and then implemented in an On-Board-Unit (OBU) in our experimental vehicle and tested at real world intersections. This same approach of HIL testing followed by testing in real intersections using our experimental vehicle is later extended to the GLOSA application. The GLOSA application that is tested in this paper has both an optimal speed advisory for passing at the green light and also includes a red light violation warning system. The paper presents the HIL and experimental vehicle evaluation systems, information about RLVW and GLOSA and HIL simulation and road testing results and their interpretations. △ Less

Submitted 2 June, 2023; originally announced June 2023.

Pre-Deployment Testing of Low Speed, Urban Road Autonomous Driving in a Simulated Environment

Authors: Xinchen Li, Aravind Chandradoss Arul Doss, Bilin Aksun Guvenc, Levent Guvenc

Abstract: Low speed autonomous shuttles emulating SAE Level L4 automated driving using human driver assisted autonomy have been operating in geo-fenced areas in several cities in the US and the rest of the world. These autonomous vehicles (AV) are operated by small to mid-sized technology companies that do not have the resources of automotive OEMs for carrying out exhaustive, comprehensive testing of their… ▽ More Low speed autonomous shuttles emulating SAE Level L4 automated driving using human driver assisted autonomy have been operating in geo-fenced areas in several cities in the US and the rest of the world. These autonomous vehicles (AV) are operated by small to mid-sized technology companies that do not have the resources of automotive OEMs for carrying out exhaustive, comprehensive testing of their AV technology solutions before public road deployment. Due to the low speed of operation and hence not operating on roads containing highways, the base vehicles of these AV shuttles are not required to go through rigorous certification tests. The way the driver assisted AV technology is tested and allowed for public road deployment is continuously evolving but is not standardized and shows differences between the different states where these vehicles operate. Currently, AVs and AV shuttles deployed on public roads are using these deployments for testing and improving their technology. However, this is not the right approach. Safe and extensive testing in a lab and controlled test environment including Model-in-the-Loop (MiL), Hardware-in-the-Loop (HiL) and Autonomous-Vehicle-in-the-Loop (AViL) testing should be the prerequisite to such public road deployments. This paper presents three dimensional virtual modeling of an AV shuttle deployment site and simulation testing in this virtual environment. We have two deployment sites in Columbus of these AV shuttles through the Department of Transportation funded Smart City Challenge project named Smart Columbus. The Linden residential area AV shuttle deployment site of Smart Columbus is used as the specific example for illustrating the AV testing method proposed in this paper. △ Less

Submitted 1 June, 2023; originally announced June 2023.

The Effects of Varying Penetration Rates of L4-L5 Autonomous Vehicles on Fuel Efficiency and Mobility of Traffic Networks

Authors: Ozgenur Kavas-Torris, M. Ridvan Cantas, Karina Meneses Cime, Bilin Aksun-Guvenc, Levent Guvenc

Abstract: Microscopic traffic simulators that simulate realistic traffic flow are crucial in studying, understanding and evaluating the fuel usage and mobility effects of having a higher number of autonomous vehicles (AVs) in traffic under realistic mixed traffic conditions including both autonomous and non-autonomous vehicles. In this paper, L4-L5 AVs with varying penetration rates in total traffic flow we… ▽ More Microscopic traffic simulators that simulate realistic traffic flow are crucial in studying, understanding and evaluating the fuel usage and mobility effects of having a higher number of autonomous vehicles (AVs) in traffic under realistic mixed traffic conditions including both autonomous and non-autonomous vehicles. In this paper, L4-L5 AVs with varying penetration rates in total traffic flow were simulated using the microscopic traffic simulator Vissim on urban, mixed and freeway roadways. The roadways used in these simulations were replicas of real roadways in and around Columbus, Ohio, including an AV shuttle routes in operation. The road-specific information regarding each roadway, such as the number of traffic lights and positions, number of STOP signs and positions, and speed limits, were gathered using OpenStreetMap with SUMO. In simulating L4-L5 AVs, the All-Knowing CoEXist AV and a vehicle with Wiedemann 74 driver were taken to represent AV and non-AV driving, respectively. Then, the driving behaviors, such as headway time and car following, desired acceleration and deceleration profiles of AV, and non-AV car following and lane change models were modified. The effect of having varying penetration rates of L4-L5 AVs were then evaluated using criteria such as average fuel consumption, existence of queues and their average/maximum length, total number of vehicles in the simulation, average delay experience by all vehicles, total number of stops experienced by all vehicles, and total emission of CO, NOx and volatile organic compounds (VOC) from the vehicles in the simulation. The results show that while increasing penetration rates of L4-L5 AVs generally improve overall fuel efficiency and mobility of the traffic network, there were also cases when the opposite trend was observed. △ Less

Submitted 1 June, 2023; originally announced June 2023.

Customized Co-Simulation Environment for Autonomous Driving Algorithm Development and Evaluation

Authors: Mustafa Ridvan Cantas, Levent Guvenc

Abstract: Increasing the implemented SAE level of autonomy in road vehicles requires extensive simulations and verifications in a realistic simulation environment before proving ground and public road testing. The level of detail in the simulation environment helps ensure the safety of a real-world implementation and reduces algorithm development cost by allowing developers to complete most of the validatio… ▽ More Increasing the implemented SAE level of autonomy in road vehicles requires extensive simulations and verifications in a realistic simulation environment before proving ground and public road testing. The level of detail in the simulation environment helps ensure the safety of a real-world implementation and reduces algorithm development cost by allowing developers to complete most of the validation in the simulation environment. Considering sensors like camera, LIDAR, radar, and V2X used in autonomous vehicles, it is essential to create a simulation environment that can provide these sensor simulations as realistically as possible. While sensor simulations are of crucial importance for perception algorithm development, the simulation environment will be incomplete for the simulation of holistic AV operation without being complemented by a realistic vehicle dynamic model and traffic cosimulation. Therefore, this paper investigates existing simulation environments, identifies use case scenarios, and creates a cosimulation environment to satisfy the simulation requirements for autonomous driving function development using the Carla simulator based on the Unreal game engine for the environment, Sumo or Vissim for traffic co-simulation, Carsim or Matlab, Simulink for vehicle dynamics co-simulation and Autoware or the author or user routines for autonomous driving algorithm co-simulation. As a result of this work, a model-based vehicle dynamics simulation with realistic sensor simulation and traffic simulation is presented. A sensor fusion methodology is implemented in the created simulation environment as a use case scenario. The results of this work will be a valuable resource for researchers who need a comprehensive co-simulation environment to develop connected and autonomous driving algorithms. △ Less

Submitted 31 May, 2023; originally announced June 2023.

Virtual and Real Data Populated Intersection Visualization and Testing Tool for V2X Application Development

Authors: Sukru Yaren Gelbal, Mustafa Ridvan Cantas, Bilin Aksun Guvenc, Levent Guvenc

Abstract: The capability afforded by Vehicle-to-Vehicle communication improves situational awareness and provides advantages for many of the traffic problems caused by reduced visibility or No-Line-of-Sight situations, being useful for both autonomous and non-autonomous driving. Additionally, with the traffic light Signal Phase and Timing and Map Datainformation and other advisory information provided with… ▽ More The capability afforded by Vehicle-to-Vehicle communication improves situational awareness and provides advantages for many of the traffic problems caused by reduced visibility or No-Line-of-Sight situations, being useful for both autonomous and non-autonomous driving. Additionally, with the traffic light Signal Phase and Timing and Map Datainformation and other advisory information provided with Vehicle-to-Infrastructure (V2I) communication, outcomes which benefit the driver in the long run, such as reducing fuel consumption with speed regulation or decreasing traffic congestion through optimal speed advisories, providing red light violation warning messages and intersection motion assist messages for collision-free intersection maneuvering are all made possible. However, develo** applications to obtain these benefits requires an intensive development process within a lengthy testing period. Understanding the intersection better is a large part of this development process. Being able to see what information is broadcasted and how this information translates into the real world would both benefit the development of these highly useful applications and also ensure faster evaluation, when presented visually, using an easy to use and interactive tool. Moreover, recordings of this broadcasted information can be modified and used for repeated testing. Modification of the data makes it flexible and allows us to use it for a variety of testing scenarios at a virtually populated intersection. Based on this premise, this paper presents and demonstrates visualization tools to project SPaT, MAP and Basic Safety Message information into easy to read real-world based graphs. Also, it provides information about the modification of the real-world data to allow creation of a virtually populated intersection, along with the capability to also inject virtual vehicles at this intersection. △ Less

Submitted 31 May, 2023; originally announced June 2023.

Mobile Safety Application for Pedestrians

Authors: Sukru Yaren Gelbal, Mustafa Ridvan Cantas, Bilin Aksun Guvenc, Levent Guvenc, Gopichandra Surnilla, Hao Zhang

Abstract: Vulnerable Road User (VRU) safety has been an important issue throughout the years as corresponding fatality numbers in traffic have been increasing each year. With the developments in connected vehicle technology, there are new and easier ways of implementing Vehicle to Everything (V2X) communication which can be utilized to provide safety and early warning benefits for VRUs. Mobile phones are on… ▽ More Vulnerable Road User (VRU) safety has been an important issue throughout the years as corresponding fatality numbers in traffic have been increasing each year. With the developments in connected vehicle technology, there are new and easier ways of implementing Vehicle to Everything (V2X) communication which can be utilized to provide safety and early warning benefits for VRUs. Mobile phones are one important point of interest with their sensors being increased in quantity and quality and improved in terms of accuracy. Bluetooth and extended Bluetooth technology in mobile phones has enhanced support to carry larger chunks of information to longer distances. The work we discuss in this paper is related to a mobile application that utilizes the mobile phone sensors and Bluetooth communication to implement Personal Safety Message (PSM) broadcast using the SAE J2735 standard to create a Pedestrian to Vehicle (P2V) based safety warning structure. This implementation allows the drivers to receive a warning on their mobile phones and be more careful about the pedestrian intending to cross the street. As a result, the driver has much more time to safely slow down and stop at the intersection. Most importantly, thanks to the wireless nature of Bluetooth connection and long-range mode in Bluetooth 5.0, most dangerous cases such as reduced visibility or No-Line-of-Sight (NLOS) conditions can be remedied. △ Less

Submitted 27 May, 2023; originally announced May 2023.

Vehicle-in-Virtual-Environment (VVE)

Authors: Xincheng Cao, Haochong Chen, Sukru Yaren Gelbal, Bilin Aksun-Guvenc, Levent Guvenc

Abstract: The current approach to connected and autonomous driving function development and evaluation uses model-in-the-loop simulation, hardware-in-the-loop simulation, and limited proving ground work followed by public road deployment of beta version of software and technology. The rest of the road users are involuntarily forced into taking part in the development and evaluation of these connected and au… ▽ More The current approach to connected and autonomous driving function development and evaluation uses model-in-the-loop simulation, hardware-in-the-loop simulation, and limited proving ground work followed by public road deployment of beta version of software and technology. The rest of the road users are involuntarily forced into taking part in the development and evaluation of these connected and autonomous driving functions in this approach. This is an unsafe, costly and inefficient method. Motivated by these shortcomings, this paper introduces the Vehicle-in-Virtual-Environment (VVE) method of safe, efficient and low cost connected and autonomous driving function development, evaluation and demonstration. The VVE method is compared to the existing state-of-the-art. Its basic implementation for a path following task is used to explain the method where the actual autonomous vehicle operates in a large empty area with its sensor feeds being replaced by realistic sensor feeds corresponding to its location and pose in the virtual environment. It is possible to easily change the development virtual environment and inject rare and difficult events which can be tested very safely. Vehicle-to-Pedestrian (V2P) communication based pedestrian safety is chosen as the application use case for VVE and corresponding experimental results are presented and discussed. It is noted that actual pedestrians and other vulnerable road users can be used very safely in this approach. △ Less

Submitted 24 May, 2023; originally announced May 2023.

Automated Driving Architecture and Operation of a Light Commercial Vehicle

Authors: Murat Gozu, Mumin Tolga Emirler, Ismail Meric Can Uygan, Tevfik Ali Boke, Levent Guvenc, Bilin Aksun-Guvenc

Abstract: This paper is on the automated driving architecture and operation of a light commercial vehicle. Simple longitudinal and lateral dynamic models of the vehicle and a more detailed CarSim model are developed and used in simulations and controller design and evaluation. Experimental validation is used to make sure that the models used represent the actual response of the vehicle as closely as possibl… ▽ More This paper is on the automated driving architecture and operation of a light commercial vehicle. Simple longitudinal and lateral dynamic models of the vehicle and a more detailed CarSim model are developed and used in simulations and controller design and evaluation. Experimental validation is used to make sure that the models used represent the actual response of the vehicle as closely as possible. The vehicle is made drive-by-wire by interfacing with the existing throttle-by-wire, by adding an active vacuum booster for brake-by-wire and by adding a steering actuator for steer-by-wire operation. Vehicle localization is achieved by using a GPS sensor integrated with six axes IMU with a built-in INS algorithm and a digital compass for heading information. Front looking radar, lidar and camera are used for environmental sensing. Communication with the road infrastructure and other vehicles is made possible by a vehicle to vehicle communication modem. A dedicated computer under real time Linux is used to collect, process and distribute sensor information. A dSPACE MicroAutoBox is used for drive-by-wire controls. CACC based longitudinal control and path tracking of a map of GPS waypoints are used to present the operation of this automated driving vehicle. △ Less

Submitted 24 May, 2023; originally announced May 2023.

Information Technology Needs in Vehicle Dynamics Control

Authors: Levent Guvenc, Bilin Aksun-Guvenc

Abstract: Significant changes are occurring in the field of vehicle dynamics control. Consequently, vehicle dynamics control systems are expected to be as common as ABS systems in the near future. This paper focuses on the information technology related requirements posed by these advances in the area of vehicle dynamics control. Topics considered include vehicle dynamics simulation tools, hardware in the l… ▽ More Significant changes are occurring in the field of vehicle dynamics control. Consequently, vehicle dynamics control systems are expected to be as common as ABS systems in the near future. This paper focuses on the information technology related requirements posed by these advances in the area of vehicle dynamics control. Topics considered include vehicle dynamics simulation tools, hardware in the loop simulation systems, sensors and related fault tolerance/diagnostics, man machine interface problems and the implications of a networked architecture on controller design. △ Less

Submitted 19 May, 2023; originally announced May 2023.

Decision Making for Autonomous Vehicles

Authors: Xinchen Li, Levent Guvenc, Bilin Aksun-Guvenc

Abstract: This paper is on decision making of autonomous vehicles for handling roundabouts. The round intersection is introduced first followed by the Markov Decision Processes (MDP), the Partially Observable Markov Decision Processes (POMDP) and the Object Oriented Partially Observable Markov Decision Process (OOPOMDP). The Partially Observable Monte-Carlo Planning algorihtm (POMCP) algorithm is introduced… ▽ More This paper is on decision making of autonomous vehicles for handling roundabouts. The round intersection is introduced first followed by the Markov Decision Processes (MDP), the Partially Observable Markov Decision Processes (POMDP) and the Object Oriented Partially Observable Markov Decision Process (OOPOMDP). The Partially Observable Monte-Carlo Planning algorihtm (POMCP) algorithm is introduced and OOPOMDP is applied to decision making for autonomous vehicles in round intersections. Decision making is formulated as a POMDP problem and the penalty function is formulated and set followed by improvement of decision making with policy prediction. The augmented objective state and policy based state transition is introduced simulations are used to demonstrate the effectiveness of the proposed method. △ Less

Submitted 26 April, 2023; originally announced April 2023.

The Limited Integrator Model Regulator And its Use in Vehicle Steering Control

Authors: Bilin Aksun-Guvenc, Levent Guvenc

Abstract: Unexpected yaw disturbances like braking on unilaterally icy road, side wind forces and tire rupture are very difficult to handle by the driver of a road vehicle, due to his/her large panic reaction period ranging between 0.5 to 2 seconds. Automatic driver assist systems provide counteracting yaw moments during this driver panic reaction period to maintain the stability of the yaw dynamics of the… ▽ More Unexpected yaw disturbances like braking on unilaterally icy road, side wind forces and tire rupture are very difficult to handle by the driver of a road vehicle, due to his/her large panic reaction period ranging between 0.5 to 2 seconds. Automatic driver assist systems provide counteracting yaw moments during this driver panic reaction period to maintain the stability of the yaw dynamics of the vehicle. An active steering based driver assist system that uses the model regulator control architecture is introduced and used here for yaw dynamics stabilization in such situations. The model regulator which is a special form of a two degree of freedom control architecture is introduced and explained in detail in a tutorial fashion whereby its integral action capability, among others, is also shown. An auxiliary steering actuation system is assumed and a limited integrator version of the model regulator based steering controller is developed in order not to saturate the auxiliary steering actuator. This low frequency limited integrator implementation also allows the driver to take care of low frequency steering and disturbance rejection tasks. Linear simulation results are used to demonstrate the effectiveness of the proposed method. △ Less

Submitted 25 April, 2023; originally announced April 2023.

Vehicle State Estimation and Prediction

Authors: Xinchen Li, Levent Guvenc, Bilin Aksun-Guvenc

Abstract: This paper presents methods for vehicle state estimation and prediction for autonomous driving. A roundabout is chosen to apply the methods and illustrate the results as autonomous vehicles have difficulty in handling roundabouts. State estimation based on the unscented Kalman filter (UKF) is introduced first with application to a roundabout. The microscopic traffic simulator SUMO is used to gener… ▽ More This paper presents methods for vehicle state estimation and prediction for autonomous driving. A roundabout is chosen to apply the methods and illustrate the results as autonomous vehicles have difficulty in handling roundabouts. State estimation based on the unscented Kalman filter (UKF) is introduced first with application to a roundabout. The microscopic traffic simulator SUMO is used to generate realistic traffic in the roundabout for the simulation experiments. Change point detection based driving behavior prediction using a multi policy approach is then introduced and evaluated for the round intersection example. Finally, these methods are combined for vehicle trajectory estimation based on UKF and policy prediction and demonstrated using the roundabout example. △ Less

Submitted 25 April, 2023; v1 submitted 23 April, 2023; originally announced April 2023.

Comments: 44 pages, 12 figures

Dynamic Speed Harmonization

Authors: Ozgenur Kavas-Torris, Levent Guvenc

Abstract: In the last decade, the accelerated advancements in manufacturing techniques and material science enabled the automotive industry to manufacture commercial vehicles at more affordable rates. This, however, brought about roadways having to accommodate an ever-increasing number of vehicles every day. However, some roadways, during specific hours of the day, had already been on the brink of reaching… ▽ More In the last decade, the accelerated advancements in manufacturing techniques and material science enabled the automotive industry to manufacture commercial vehicles at more affordable rates. This, however, brought about roadways having to accommodate an ever-increasing number of vehicles every day. However, some roadways, during specific hours of the day, had already been on the brink of reaching their capacity to withstand the number of vehicles travelling on them. Hence, overcrowded roadways create slow traffic, and sometimes, bottlenecks. In this paper, a Dynamic Speed Harmonization (DSH) algorithm that regulates the speed of a vehicle to prevent it from being affected by bottlenecks has been presented. First, co-simulations were run between MATLAB Simulink and CarSim to test different deceleration profiles. Then, Hardware-in-the-Loop (HIL) simulations were run with a Road Side Unit (RSU), which emulated a roadside detector that spotted bottlenecks and sent information to the Connected Vehicle about the position of the queue and the average speed of the vehicles at the queue. The DSH algorithm was also tested on a track to compare the performance of the different deceleration profiles in terms of ride comfort. △ Less

Submitted 25 December, 2022; originally announced December 2022.

Comments: 7 pages, 5 figures

Vehicle in Virtual Environment (VVE) Method

Authors: Sukru Yaren Gelbal, Bilin Aksun-Guvenc, Levent Guvenc

Abstract: Autonomous vehicle (AV) algorithms need to be tested extensively in order to make sure the vehicle and the passengers will be safe while using it after the implementation. Testing these algorithms in real world create another important safety critical point. Real world testing is also subjected to limitations such as logistic limitations to carry or drive the vehicle to a certain location. For thi… ▽ More Autonomous vehicle (AV) algorithms need to be tested extensively in order to make sure the vehicle and the passengers will be safe while using it after the implementation. Testing these algorithms in real world create another important safety critical point. Real world testing is also subjected to limitations such as logistic limitations to carry or drive the vehicle to a certain location. For this purpose, hardware in the loop (HIL) simulations as well as virtual environments such as CARLA and LG SVL are used widely. This paper discusses a method that combines the real vehicle with the virtual world, called vehicle in virtual environment (VVE). This method projects the vehicle location and heading into a virtual world for desired testing, and transfers back the information from sensors in the virtual world to the vehicle. As a result, while vehicle is moving in the real world, it simultaneously moves in the virtual world and obtains the situational awareness via multiple virtual sensors. This would allow testing in a safe environment with the real vehicle while providing some additional benefits on vehicle dynamics fidelity, logistics limitations and passenger experience testing. The paper also demonstrates an example case study where path following and the virtual sensors are utilized to test a radar based stop** algorithm. △ Less

Submitted 21 December, 2022; originally announced December 2022.

Comments: 5v pages, 6 figures

Shared Autonomous Vehicle Mobility for a Transportation Underserved City

Authors: Karina Meneses-Cime, Bilin Aksun-Guvenc, Levent Guvenc

Abstract: This paper proposes the use of an on-demand, ride hailed and ride-Shared Autonomous Vehicle (SAV) service as a feasible solution to serve the mobility needs of a small city where fixed route, circulator type public transportation may be too expensive to operate. The presented work builds upon our earlier work that modeled the city of Marysville, Ohio as an example of such a city, with realistic tr… ▽ More This paper proposes the use of an on-demand, ride hailed and ride-Shared Autonomous Vehicle (SAV) service as a feasible solution to serve the mobility needs of a small city where fixed route, circulator type public transportation may be too expensive to operate. The presented work builds upon our earlier work that modeled the city of Marysville, Ohio as an example of such a city, with realistic traffic behavior, and trip requests. A simple SAV dispatcher is implemented to model the behavior of the proposed on-demand mobility service. The goal of the service is to optimally distribute SAVs along the network to allocate passengers and shared rides. The pickup and drop-off locations are strategically placed along the network to provide mobility from affordable housing, which are also transit deserts, to locations corresponding to jobs and other opportunities. The study is carried out by varying the behaviors of the SAV driving system from cautious to aggressive along with the size of the SAV fleet and analyzing their corresponding performance. It is found that the size of the network and behavior of AV driving system behavior results in an optimal number of SAVs after which increasing the number of SAVs does not improve overall mobility. For the Marysville network, which is a 9 mile by 8 mile network, this happens at the mark of a fleet of 8 deployed SAVs. The results show that the introduction of the proposed SAV service with a simple optimal shared scheme can provide access to services and jobs to hundreds of people in a small sized city. △ Less

Submitted 25 October, 2022; originally announced October 2022.

A Comprehensive Eco-Driving Strategy for Connected and Autonomous Vehicles (CAVs) with Microscopic Traffic Simulation Testing Evaluation

Authors: Ozgenur Kavas-Torris, Levent Guvenc

Abstract: In this paper, a comprehensive Eco-Driving strategy for CAVs is presented. In this setup, multiple driving modes calculate speed profiles ideal for their own set of constraints simultaneously to save fuel as much as possible, while a High Level (HL) controller ensures smooth transitions between the driving modes for Eco-Driving. This Eco-Driving deterministic controller for an ego CAV was equipped… ▽ More In this paper, a comprehensive Eco-Driving strategy for CAVs is presented. In this setup, multiple driving modes calculate speed profiles ideal for their own set of constraints simultaneously to save fuel as much as possible, while a High Level (HL) controller ensures smooth transitions between the driving modes for Eco-Driving. This Eco-Driving deterministic controller for an ego CAV was equipped with Vehicle-to-Infrastructure (V2I) and Vehicle-to-Vehicle (V2V) algorithms. Simulation results are used to show that the HL controller ensures significant fuel economy improvement as compared to baseline driving modes with no collisions between the ego CAV and traffic vehicles while the driving mode of the ego CAV was set correctly under changing constraints. △ Less

Submitted 16 June, 2022; originally announced June 2022.

Autonomous Road Vehicle Emergency Obstacle Avoidance Maneuver Framework at Highway Speeds

Authors: Evan Lowe, Levent Güvenç

Abstract: An Autonomous Road Vehicle (ARV) can navigate various types of road networks using inputs such as throttle (acceleration), braking (deceleration), and steering (change of lateral direction). In most ARV driving scenarios that involve normal vehicle traffic and encounters with vulnerable road users (VRUs), ARVs are not required to take evasive action. This paper presents a novel Emergency Obstacle… ▽ More An Autonomous Road Vehicle (ARV) can navigate various types of road networks using inputs such as throttle (acceleration), braking (deceleration), and steering (change of lateral direction). In most ARV driving scenarios that involve normal vehicle traffic and encounters with vulnerable road users (VRUs), ARVs are not required to take evasive action. This paper presents a novel Emergency Obstacle Avoidance Maneuver (EOAM) methodology for ARVs traveling at higher speeds and lower road surface friction, involving time-critical maneuver determination and control. The proposed EOAM Framework offers usage of the ARV's sensing, perception, control, and actuation system abilities as one cohesive system, to accomplish avoidance of an on-road obstacle, based first on performance feasibility and second on passenger comfort, and is designed to be well-integrated within an ARV high-level system. Co-simulation including the ARV EOAM logic in Simulink and a vehicle model in CarSim is conducted with speeds ranging from 55 to 165 km/h and on road surfaces with friction ranging from 1.0 to 0.1. The results are analyzed and given in the context of an entire ARV system, with implications for future work. △ Less

Submitted 28 March, 2022; originally announced March 2022.

Comments: 50 pages, 25 figures, 2 tables

Modelling and Analysis of Car Following Algorithms for Fuel Economy Improvement in Connected and Autonomous Vehicles (CAVs)

Authors: Ozgenur Kavas-Torris, Levent Guvenc

Abstract: Connectivity in ground vehicles allows vehicles to share crucial vehicle data, such as vehicle acceleration, with each other. Using sensors such as cameras, radars and lidars, on the other hand, the intravehicular distance between a leader vehicle and a host vehicle can be detected, as well as the relative speed. Cooperative Adaptive Cruise Control (CACC) builds upon ground vehicle connectivity an… ▽ More Connectivity in ground vehicles allows vehicles to share crucial vehicle data, such as vehicle acceleration, with each other. Using sensors such as cameras, radars and lidars, on the other hand, the intravehicular distance between a leader vehicle and a host vehicle can be detected, as well as the relative speed. Cooperative Adaptive Cruise Control (CACC) builds upon ground vehicle connectivity and sensor information to form convoys with automated car following. CACC can also be used to improve fuel economy and mobility performance of vehicles in the said convoy. In this paper, 3 car following algorithms for fuel economy of CAVs are presented. An Adaptive Cruise Control (ACC) algorithm was designed as the benchmark model for comparison. A Cooperative Adaptive Cruise Control (CACC) was designed, which uses lead vehicle acceleration received through V2V in car following. an Ecological Cooperative Adaptive Cruise Control (Eco-CACC) model was developed that takes the erratic lead vehicle acceleration as a disturbance to be attenuated. A High Level (HL) controller was designed for decision making when the lead vehicle was an erratic driver. Model-in-the-Loop (MIL) and Hardware-in-the-Loop (HIL) simulations were run to test these car following algorithms for fuel economy performance. The results show that the HL controller was able to attain a smooth speed profile that consumed less fuel through using CACC and Eco-CACC than its ACC counterpart when the lead vehicle was erratic. △ Less

Submitted 25 March, 2022; v1 submitted 22 March, 2022; originally announced March 2022.

V2X Communication Between Connected and Automated Vehicles (CAVs) and Unmanned Aerial Vehicles (UAVs)

Authors: Ozgenur Kavas-Torris, Sukru Yaren Gelbal, Mustafa Ridvan Cantas, Bilin Aksun-Guvenc, Levent Guvenc

Abstract: Connectivity between ground vehicles can be utilized and expanded to include aerial vehicles for coordinated missions. Using Vehicle-to-Everything (V2X) communication technologies, a communication link can be established between Connected and Autonomous vehicles (CAVs) and Unmanned Aerial vehicles (UAVs). Hardware implementation and testing of a ground to air communication link is crucial for real… ▽ More Connectivity between ground vehicles can be utilized and expanded to include aerial vehicles for coordinated missions. Using Vehicle-to-Everything (V2X) communication technologies, a communication link can be established between Connected and Autonomous vehicles (CAVs) and Unmanned Aerial vehicles (UAVs). Hardware implementation and testing of a ground to air communication link is crucial for real-life applications. Two different communication links were established, Dedicated Short Range communication (DSRC) and 4G internet based WebSocket communication. Both links were tested separately both for stationary and dynamic test cases. One step further, both links were used together for a real-life use case scenario called Quick Clear demonstration. The aim was to first send ground vehicle location information from the CAV to the UAV through DSRC communication. On the UAV side, the connection between the DSRC modem and Raspberry Pi companion computer was established through User Datagram Protocol (UDP) to get the CAV location information to the companion computer. Raspberry Pi handles 2 different connection, it first connects to a traffic contingency management system (CMP) through Transmission Control Protocol (TCP) to send CAV and UAV location information to the CMP. Secondly, Raspberry Pi uses a WebSocket communication to connect to a web server to send photos taken by an on-board camera the UAV has. Quick Clear demo was conducted both for stationary test and dynamic flight tests. The results show that this communication structure can be utilized for real-life scenarios. △ Less

Submitted 2 September, 2021; v1 submitted 31 August, 2021; originally announced September 2021.

Comments: 11 pages, 14 figures

A Review of Autonomous Road Vehicle Integrated Approaches to an Emergency Obstacle Avoidance Maneuver

Authors: Evan Lowe, Levent Guvenç

Abstract: As passenger vehicle technologies have advanced, so have their capabilities to avoid obstacles, especially with developments in tires, suspensions, steering, as well as safety technologies like ABS, ESC, and more recently, ADAS systems. However, environments around passenger vehicles have also become more complex, and dangerous. There have previously been studies that outline driver tendencies and… ▽ More As passenger vehicle technologies have advanced, so have their capabilities to avoid obstacles, especially with developments in tires, suspensions, steering, as well as safety technologies like ABS, ESC, and more recently, ADAS systems. However, environments around passenger vehicles have also become more complex, and dangerous. There have previously been studies that outline driver tendencies and performance capabilities when attempting to avoid obstacles while driving passenger vehicles. Now that autonomous vehicles are being developed with obstacle avoidance capabilities, it is important to target performance that meets or exceeds that of human drivers. This manuscript highlights systems that are crucial for an emergency obstacle avoidance maneuver (EOAM) and identifies the state-of-the-art for each of the related systems, while considering the nuances of traveling at highway speeds. Some of the primary EOAM-related systems/areas that are discussed in this review are: general path planning methods, system hierarchies, decision-making, trajectory generation, and trajectory-tracking control methods. After concluding remarks, suggestions for future work which could lead to an ideal EOAM development, are discussed. △ Less

Submitted 18 June, 2021; v1 submitted 19 May, 2021; originally announced May 2021.

Comments: (Bookmarks for section headings included) 59 pages of text, 14 pages of references, 60 figures, 3 tables

Pedestrian Path Modification Mobile Tool for COVID-19 Social Distancing for Use in Multi-Modal Trip Navigation

Authors: Sukru Yaren Gelbal, Mustafa Ridvan Cantas, Bilin Aksun-Guvenc, Levent Guvenc

Abstract: The novel Corona virus pandemic is one of the biggest worldwide problems right now. While hygiene and wearing masks make up a large portion of the currently suggested precautions by the Centers for Disease Control and Prevention (CDC) and World Health Organization (WHO), social distancing is another and arguably the most important precaution that would protect people since the airborne virus is ea… ▽ More The novel Corona virus pandemic is one of the biggest worldwide problems right now. While hygiene and wearing masks make up a large portion of the currently suggested precautions by the Centers for Disease Control and Prevention (CDC) and World Health Organization (WHO), social distancing is another and arguably the most important precaution that would protect people since the airborne virus is easily transmitted through the air. Social distancing while walking outside, can be more effective, if pedestrians know locations of each other and even better if they know locations of people who are possible carriers. With this information, they can change their routes depending on the people walking nearby or they can stay away from areas that contain or have recently contained crowds. This paper presents a mobile device application that would be a very beneficial tool for social distancing during Coronavirus Disease 2019 (COVID-19). The application works, synced close to real-time, in a networking fashion with all users obtaining their locations and drawing a virtual safety bubble around them. These safety bubbles are used with the constant velocity pedestrian model to predict possible future social distancing violations and warn the user with sound and vibration. Moreover, it takes into account the virus staying airborne for a certain time, hence, creating time-decaying non-safe areas in the past trajectories of the users. The mobile app generates collision free paths for navigating around the undesired locations for the pedestrian mode of transportation when used as part of a multi-modal trip planning app. Results are applicable to other modes of transportation also. Features and the methods used for implementation are discussed in the paper. The application is tested using previously collected real pedestrian walking data in a realistic environment. △ Less

Submitted 4 November, 2021; v1 submitted 8 May, 2021; originally announced May 2021.

Comments: 8 pages, 9 figures

Data Association Between Perception and V2V Communication Sensors

Authors: Mustafa Ridvan Cantas, Arpita Chand, Hao Zhang, Gopi Chandra Surnilla, Levent Guvenc

Abstract: The connectivity between vehicles, infrastructure, and other traffic participants brings a new dimension to automotive safety applications. Soon all the newly produced cars will have Vehicle to Everything (V2X) communication modems alongside the existing Advanced Driver Assistant Systems (ADAS). It is essential to identify the different sensor measurements for the same targets (Data Association) t… ▽ More The connectivity between vehicles, infrastructure, and other traffic participants brings a new dimension to automotive safety applications. Soon all the newly produced cars will have Vehicle to Everything (V2X) communication modems alongside the existing Advanced Driver Assistant Systems (ADAS). It is essential to identify the different sensor measurements for the same targets (Data Association) to use connectivity reliably as a safety feature alongside the standard ADAS functionality. Considering the camera is the most common sensor available for ADAS systems, in this paper, we present an experimental implementation of a Mahalanobis distance-based data association algorithm between the camera and the Vehicle to Vehicle (V2V) communication sensors. The implemented algorithm has low computational complexity and the capability of running in real-time. One can use the presented algorithm for sensor fusion algorithms or higher-level decision-making applications in ADAS modules. △ Less

Submitted 20 January, 2021; originally announced January 2021.

SmartShuttle: Model Based Design and Evaluation of Automated On-Demand Shuttles for Solving the First-Mile and Last-Mile Problem in a Smart City

Authors: Sukru Yaren Gelbal, Bilin Aksun-Guvenc, Levent Guvenc

Abstract: The final project report for the SmartShuttle sub-project of the Ohio State University is presented in this report. This has been a two year project where the unified, scalable and replicable automated driving architecture introduced by the Automated Driving Lab of the Ohio State University has been further developed, replicated in different vehicles and scaled between different vehicle sizes. A l… ▽ More The final project report for the SmartShuttle sub-project of the Ohio State University is presented in this report. This has been a two year project where the unified, scalable and replicable automated driving architecture introduced by the Automated Driving Lab of the Ohio State University has been further developed, replicated in different vehicles and scaled between different vehicle sizes. A limited scale demonstration was also conducted during the first year of the project. The architecture used was further developed in the second project year including parameter space based low level controller design, perception methods and data collection. Perception sensor and other relevant vehicle data were collected in the second project year. Our approach changed to using soft AVs in a hardware-in-the-loop simulation environment for proof-of-concept testing. Our second year work also had a change of localization from GPS and lidar based SLAM to GPS and map matching using a previously constructed lidar map in a geo-fenced area. An example lidar map was also created. Perception sensor and other collected data and an example lidar map are shared as datasets as further outcomes of the project. △ Less

Submitted 4 March, 2022; v1 submitted 22 December, 2020; originally announced December 2020.

Comments: 49 pages, 44 figures

Simulation Environment for Safety Assessment of CEAV Deployment in Linden

Authors: Levent Guvenc, Bilin Aksun-Guvenc, Xinchen Li, Aravind Chandradoss Arul Doss, Karina Meneses-Cime, Sukru Yaren Gelbal

Abstract: This report presents a simulation environment for pre-deployment testing of the autonomous shuttles that will operate in the Linden Residential Area. An autonomous shuttle deployment was already successfully launched and operated in the city of Columbus and ended recently. This report focuses on the second autonomous shuttle deployment planned to start in December, 2019, using a route that will he… ▽ More This report presents a simulation environment for pre-deployment testing of the autonomous shuttles that will operate in the Linden Residential Area. An autonomous shuttle deployment was already successfully launched and operated in the city of Columbus and ended recently. This report focuses on the second autonomous shuttle deployment planned to start in December, 2019, using a route that will help to solve first-mile / last-mile mobility challenges in the Linden neighborhood of Columbus by providing free rides between St. Stephens Community House, Douglas Community Recreation Center, Rosewind Resident Council and Linden Transit Center. This document presents simulation testing environments in two open source simulators and a commercial simulator for this residential area route and how they can be used for model-in-the-loop and hardware-in-the-loop simulation testing of autonomous shuttle operation before the actual deployment. △ Less

Submitted 18 December, 2020; originally announced December 2020.

Comments: 70 pages, 53 figures

Preventive and Active Safety Applications

Authors: Levent Guvenc

Abstract: Road vehicle safety systems can be broadly classified into the two categories of passive and active systems. The aim of passive safety systems is to reduce risk of injury to the occupants of the vehicle during and after an accident like a crash or rollover. Passive safety systems include the design of safety restraints, design for crashworthiness, seat belts and air bags. In contrast to passive sy… ▽ More Road vehicle safety systems can be broadly classified into the two categories of passive and active systems. The aim of passive safety systems is to reduce risk of injury to the occupants of the vehicle during and after an accident like a crash or rollover. Passive safety systems include the design of safety restraints, design for crashworthiness, seat belts and air bags. In contrast to passive systems, the aim in active safety is to prevent an accident from occurring in the first place. As such, it makes sense to call them preventive systems also. Here, the concentration is on preventive and active safety systems. The current state of the art in some key preventive and active safety systems is presented in this paper, wherein the various techniques used are also explained briefly. In some cases, the presentation is complemented with results obtained in the research group of the author. A road map of expected future developments in the area of preventive and safety applications is also presented. △ Less

Submitted 4 March, 2022; v1 submitted 14 December, 2020; originally announced December 2020.

Comments: 12 pages, 7 figures

Yaw Stability Control System Development and Implementation for a Fully Electric Vehicle

Authors: Kerim Kahraman, Mutlu Senturk, Mumin Tolga Emirler, Ismail Meric Can Uygan, Bilin Aksun-Guvenc, Levent Guvenc, Baris Efendioglu

Abstract: There is growing interest in fully electric vehicles in the automotive industry as it becomes increasingly more difficult to meet new and upcoming emission regulations based on internal combustion engines. Fully electric vehicles do not have an internal combustion engine. Hence, drive torque change for a traction control system and for a yaw stability control system has to be through the electric… ▽ More There is growing interest in fully electric vehicles in the automotive industry as it becomes increasingly more difficult to meet new and upcoming emission regulations based on internal combustion engines. Fully electric vehicles do not have an internal combustion engine. Hence, drive torque change for a traction control system and for a yaw stability control system has to be through the electric motor used for traction. The regenerative braking capability of fully electric vehicles has to be taken into account in designing braking controllers like ABS and yaw stability control through differential braking. Fully electric vehicles are usually lighter vehicles with different dynamic characteristics than that of their predecessors using internal combustion engines. As such, their yaw stability control systems have to be re-designed and tested. This paper reports the initial results of ongoing work on yaw stability controller design for a fully electric vehicle. Two different implementations on a research prototype fully electric light commercial vehicle are considered. The first implementation uses the production yaw stability control system in the internal combustion engine powered conventional vehicle. The drive torque change commands from the production ECU are read, modified and sent to the electric motor driver in trying to mimic the conventional vehicle. The differential braking commands are the same as in the conventional vehicle. In the second implementation, a generic yaw stability control system that calculates and issues its own drive torque change commands and differential braking commands is designed and implemented. Offline simulations on a validated model and a hardware-in-the-loop simulation system are used in designing the yaw stability control system. △ Less

Submitted 4 March, 2022; v1 submitted 8 December, 2020; originally announced December 2020.

Comments: 10 pages, 17 figures, 2 tables

Multi-Objective Digital PID Controller Design in Parameter Space

Authors: Haoan Wang, Levent Guvenc

Abstract: This paper presents a multi-objective digital PID controller design method using the parameter space approach of robust control. Absolute stability is treated first by finding the digital PID controller gain parameter space corresponding to closed loop poles being inside the unit circle. Phase margin, gain margin and a mixed sensitivity bound are treated as frequency domain constraints. Determinat… ▽ More This paper presents a multi-objective digital PID controller design method using the parameter space approach of robust control. Absolute stability is treated first by finding the digital PID controller gain parameter space corresponding to closed loop poles being inside the unit circle. Phase margin, gain margin and a mixed sensitivity bound are treated as frequency domain constraints. Determination of digital PID controller parameter space regions satisfying these constraints is presented. All of these regions are superimposed to obtain a multi-objective digital PID controller gain parameter space solution region. The path following controller design of an automated driving vehicle is used as an example to illustrate the method. △ Less

Submitted 27 September, 2021; v1 submitted 3 December, 2020; originally announced December 2020.

Comments: 7 pages, 10 figures

Low Cost, Educational Internal Combustion Engine Electronic Control Unit Hardware-in-the-Loop Test Systems

Authors: Sertac Karaman, Levent Guvenc

Abstract: Different hardware platforms and their associated real time operating systems that can be used in an educational laboratory for illustrating engine electronic control unit hardware in the loop testing are presented and compared in this paper. A Matlab graphical user interface prepared for generating synthetic crank and camshaft angular position sensor signals to be fed to the engine electronic con… ▽ More Different hardware platforms and their associated real time operating systems that can be used in an educational laboratory for illustrating engine electronic control unit hardware in the loop testing are presented and compared in this paper. A Matlab graphical user interface prepared for generating synthetic crank and camshaft angular position sensor signals to be fed to the engine electronic control unit during hardware-in-the-loop testing is introduced. This graphical user interface is used to generate faulty sensor signals to check the response of the engine electronic control unit during hardware-in-the-loop simulation. Examples of faulty signals that can be generated with the graphical user interface are illustrated. △ Less

Submitted 1 December, 2020; originally announced December 2020.

Comments: 6 pages, 11 figures, 1 table

Parameter Space Design of Repetitive Controllers for Satisfying a Robust Performance Requirement

Authors: Burak Demirel, Levent Guvenc

Abstract: A parameter space procedure for designing chosen parameters of a repetitive controller to satisfy a robust performance criterion is presented. Using this method, low order robust repetitive controllers can be designed and implemented for plants that possibly include time delay, poles on the imaginary axis and discontinuous weights. A design and simulation study based on a high speed atomic force m… ▽ More A parameter space procedure for designing chosen parameters of a repetitive controller to satisfy a robust performance criterion is presented. Using this method, low order robust repetitive controllers can be designed and implemented for plants that possibly include time delay, poles on the imaginary axis and discontinuous weights. A design and simulation study based on a high speed atomic force microscope position control example is utilized to illustrate the method presented in this paper. △ Less

Submitted 1 December, 2014; originally announced December 2014.

Journal ref: IEEE Transactions on Automatic Control, 55(8): 1893-1899, Aug. 2010

State Feedback Control for Adjusting the Dynamic Behavior of a Piezoactuated Bimorph Atomic Force Microscopy Probe

Authors: Bilal Orun, Serkan Necipoglu, Cagatay Basdogan, Levent Guvenc

Abstract: We adjust the transient dynamics of a piezo-actuated bimorph Atomic Force Microscopy (AFM) probe using a state feedback controller. This approach enables us to adjust the quality factor and the resonance frequency of the probe simultaneously. First, we first investigate the effect of feedback gains on dynamic response of the probe and then show that the time constant of the probe can be reduced by… ▽ More We adjust the transient dynamics of a piezo-actuated bimorph Atomic Force Microscopy (AFM) probe using a state feedback controller. This approach enables us to adjust the quality factor and the resonance frequency of the probe simultaneously. First, we first investigate the effect of feedback gains on dynamic response of the probe and then show that the time constant of the probe can be reduced by reducing its quality factor and/or increasing its resonance frequency to reduce the scan error in tap** mode AFM. △ Less

Submitted 13 April, 2012; originally announced April 2012.

Journal ref: Review of Scientific Instruments, Vol. 80, No.6, 063701, 2009

Robust Repetitive Controller for Fast AFM Imaging

Authors: Serkan Necipoglu, Selman Cebeci, Yunus Has, Levent Guvenc, Cagatay Basdogan

Abstract: Currently, Atomic Force Microscopy (AFM) is the most preferred Scanning Probe Microscopy (SPM) method due to its numerous advantages. However, increasing the scanning speed and reducing the interaction forces between the probe's tip and the sample surface are still the two main challenges in AFM. To meet these challenges, we take advantage of the fact that the lateral movements performed during an… ▽ More Currently, Atomic Force Microscopy (AFM) is the most preferred Scanning Probe Microscopy (SPM) method due to its numerous advantages. However, increasing the scanning speed and reducing the interaction forces between the probe's tip and the sample surface are still the two main challenges in AFM. To meet these challenges, we take advantage of the fact that the lateral movements performed during an AFM scan is a repetitive motion and propose a Repetitive Controller (RC) for the z-axis movements of the piezo-scanner. The RC utilizes the profile of the previous scan line while scanning the current line to achieve a better scan performance. The results of the scanning experiments performed with our AFM set-up show that the proposed RC significantly outperforms a conventional PI controller that is typically used for the same task. The scan error and the average tap** forces are reduced by 66% and 58%, respectively when the scan speed is increased by 7-fold. △ Less

Submitted 13 April, 2012; originally announced April 2012.

Journal ref: IEEE Transactions on Nanotechnology, Vol. 10, No.5, pp. 1074-1082, 2011. IEEE Transactions on Nanotechnology, Vol. 10, No.5, pp. 1074-1082