-
The Optimal Growth Mode in the Relaxation to Statistical Equilibrium
Authors:
Manuel Santos Gutiérrez,
Mickaël D. Chekroun
Abstract:
Systems far from equilibrium approach stability slowly due to "anti-mixing" characterized by regions of the phase-space that remain disconnected after prolonged action of the flow. We introduce the Optimal Growth Mode (OGM) to capture this slow initial relaxation. The OGM is calculated from Markov matrices approximating the action of the Fokker-Planck operator onto the phase space. It is obtained…
▽ More
Systems far from equilibrium approach stability slowly due to "anti-mixing" characterized by regions of the phase-space that remain disconnected after prolonged action of the flow. We introduce the Optimal Growth Mode (OGM) to capture this slow initial relaxation. The OGM is calculated from Markov matrices approximating the action of the Fokker-Planck operator onto the phase space. It is obtained as the mode having the largest growth in energy before decay. Important nuances between the OGM and the more traditional slowest decaying mode are detailed in the case of the Lorenz 63 model. The implications for understanding how complex systems respond to external forces, are discussed.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
The Orbit and Mass of the Cepheid AW Per
Authors:
Nancy Remage Evans,
Alexandre Gallenne,
Pierre Kervella,
Antoine Mérand,
John Monnier,
Richard I Anderson,
H. Moritz Günther,
Charles Proffitt,
Elaine M. Winston,
Grzegorz Pietrzynski,
Wolfgang Gieren,
Joanna Kuraszkiewicz,
Narsireddy Anugu,
Rachael M. Roettenbacher,
Cyprien Lanthermann,
Mayra Gutierrez,
Gail Schaefer,
Benjamin R. Setterholm,
Noura Ibrahim,
Stefan Kraus
Abstract:
The Cepheid AW Per is a component in a multiple system with a long period orbit. The radial velocities of Griffin (2016) cover the 38 year orbit well. An extensive program of interferometry with the CHARA array is reported here, from which the long period orbit is determined. In addition, a {\it Hubble Space Telescope} high resolution spectrum in the ultraviolet demonstrates that the companion is…
▽ More
The Cepheid AW Per is a component in a multiple system with a long period orbit. The radial velocities of Griffin (2016) cover the 38 year orbit well. An extensive program of interferometry with the CHARA array is reported here, from which the long period orbit is determined. In addition, a {\it Hubble Space Telescope} high resolution spectrum in the ultraviolet demonstrates that the companion is itself a binary with nearly equal mass components. These data combined with a distance from {\it Gaia} provide a mass of the Cepheid (primary) of M$_1$ = 6.79 $\pm$ 0.85 $M_\odot$. The combined mass of the secondary is M$_S$ = 8.79 $\pm$ 0.50 $M_\odot$. The accuracy of the mass will be improved after the fourth Gaia data release expected in approximately two years.
△ Less
Submitted 25 June, 2024;
originally announced June 2024.
-
Acoustically Transparent Alumina-based Cranial Implants Enhance Ultrasound Transmission Through a Combined Mechano-Acoustic Resonant Effect
Authors:
Mario Ibrahin Gutierrez,
Pathikumar Sellappan,
Elias H. Penilla,
Irais Poblete-Naredo,
Arturo Vera,
Lorenzo Leija,
Javier E. Garay
Abstract:
Therapeutic ultrasound for brain stimulation has increased in the last years. This energy has shown promising results for treating Alzheimers disease, Parkinsons disease, and traumatic brain injury, among other conditions. However, the application of ultrasound in the brain should trespass a natural but highly attenuating and distorting barrier, the cranium. Implantable ceramic materials can be us…
▽ More
Therapeutic ultrasound for brain stimulation has increased in the last years. This energy has shown promising results for treating Alzheimers disease, Parkinsons disease, and traumatic brain injury, among other conditions. However, the application of ultrasound in the brain should trespass a natural but highly attenuating and distorting barrier, the cranium. Implantable ceramic materials can be used to replace part of the cranium as an alternate method to enhance ultrasound transmission. In this work, it is presented the acoustic characterization of alumina ceramic disks that can be employed as cranial implants for acoustic windows-to-the-brain. Alumina samples were prepared using current-activated pressure-assisted densification and were acoustically characterized. Acoustic impedance and attenuation of the samples were determined for different porosities. Additionally, measured and modeled acoustic fields are presented and analyzed in terms of the total ultrasound transmitted through the ceramics. Results indicate a resonant behavior in the alumina disks when the thickness corresponds to a half-wavelength of ultrasound; this resonance permits a total of 95.4% of ultrasound transmission; for thicknesses out of the resonant zone, transmission is 53.0%. Alumina proves to be an excellent medium for ultrasound transmission that, in conjunction with its mechanical and optical properties, can be useful for cranium replacement in mixed opto-acoustic applications.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
Numerical relativity simulations of compact binaries: comparison of cell- and vertex-centered adaptive meshes
Authors:
Boris Daszuta,
William Cook,
Peter Hammond,
Jacob Fields,
Eduardo M. Gutiérrez,
Sebastiano Bernuzzi,
David Radice
Abstract:
Given the compact binary evolution problem of numerical relativity, in the finite-difference, block-based, adaptive mesh refinement context, choices must be made on how evolved fields are to be discretized. In GR-Athena++, the space-time solver was previously fixed to be vertex-centered. Here, our recent extensions to a cell-centered treatment, are described. Simplifications in the handling of var…
▽ More
Given the compact binary evolution problem of numerical relativity, in the finite-difference, block-based, adaptive mesh refinement context, choices must be made on how evolved fields are to be discretized. In GR-Athena++, the space-time solver was previously fixed to be vertex-centered. Here, our recent extensions to a cell-centered treatment, are described. Simplifications in the handling of variables during the treatment of general relativistic magneto-hydrodynamical (GRMHD) evolution are found. A novelty is that performance comparison for the two choices of grid sampling is made within a single code-base. In the case of a binary black hole inspiral-merger problem, by evolving geometric fields on vertex-centers, an average $\sim 20\%$ speed increase is observed, when compared against cell-centered sampling. The opposite occurs in the GRMHD setting. A binary neutron star inspiral-merger-collapse problem, representative of typical production simulations is considered. We find that cell-centered sampling for the space-time solver improves performance, by a similar factor.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Spatial light mode analogues of generalized quantum coherent states
Authors:
M. P. Morales Rodríguez,
E. García Herrera,
O. Magaña Loaiza,
B. Perez-Garcia,
F. Marroquín Gutíerrez,
B. M. Rodríguez-Lara
Abstract:
We use the spatial degree of freedom of light modes to construct optical analogues of generalized quantum coherent states for Hermite- and Laguerre-Gauss modes. Our optical analogues preserve the statistical properties of their quantum counterparts, encoded in their amplitude and phase distributions. We explore three basic symmetries that provide generalized displaced, rotated, and squeezed cohere…
▽ More
We use the spatial degree of freedom of light modes to construct optical analogues of generalized quantum coherent states for Hermite- and Laguerre-Gauss modes. Our optical analogues preserve the statistical properties of their quantum counterparts, encoded in their amplitude and phase distributions. We explore three basic symmetries that provide generalized displaced, rotated, and squeezed coherent states. Given the substantial interest in squeezed states for probing matter, we believe that the optical analogues introduced here have significant implications for optical sensing. Specifically, the single-particle nature of our spatial modes makes them robust candidates for sensing photosensitive materials. Overall, our approach opens the door to optical metrology and sensing protocols that mimic those already existing in the quantum realm, and facilitates further exploration of the quantum state zoo through classical optical analogues.
△ Less
Submitted 31 May, 2024;
originally announced June 2024.
-
Gibbs states and Brownian models for coexisting haze and cloud droplets
Authors:
Manuel Santos Gutiérrez,
Mickaël David Chekroun,
Ilan Koren
Abstract:
Clouds microphysics describes the formation and evolution of cloud droplets, rain, and ice particles. It is among the most critical factors in determining the cloud's size, lifetime, precipitation, and radiative effect. Among all cloud types, the small clouds, characterized by weak updrafts, that are close to the haze-to-cloud transition pose challenges in measuring them and understanding their pr…
▽ More
Clouds microphysics describes the formation and evolution of cloud droplets, rain, and ice particles. It is among the most critical factors in determining the cloud's size, lifetime, precipitation, and radiative effect. Among all cloud types, the small clouds, characterized by weak updrafts, that are close to the haze-to-cloud transition pose challenges in measuring them and understanding their properties. They are superabundant but hard to capture by satellites and often falsely regarded as aerosols. Köhler's theory explains droplet activation and their growth by condensation at the earliest stages of cloud development. It fully describes the thermodynamic state of a single drop but falls short when explaining the collective behavior of large populations of particles. This is especially important when the supersaturation pool is limited. We present an analytical framework to extend Köhler's theory to coexisting cloud droplets. Our results suggest hysteresis and asymmetry in the process of droplet activation and deactivation. The turbulent nature of clouds is incorporated into our model formulation as Brownian noise to provide explicit droplet size distributions and activation timescales. The theoretical findings are confronted with experimental data stemming from laboratory clouds created in the Pi convection chamber, suggesting a new way of understanding haze-to-cloud transitions and small cloud formation processes.
△ Less
Submitted 26 May, 2024;
originally announced May 2024.
-
Accretion onto supermassive black hole binaries
Authors:
Eduardo M. Gutiérrez,
Luciano Combi,
Geoffrey Ryan
Abstract:
In this chapter, we give an overview of our current understanding of the physics of accreting massive black hole binaries (MBHBs), with a special focus on the latest developments in numerical simulations and General-Relativistic Magnetohydrodynamics (GRMHD) simulations in particular. We give a self-contained global picture of how to model accretion onto MBHBs, analyzing different aspects of the sy…
▽ More
In this chapter, we give an overview of our current understanding of the physics of accreting massive black hole binaries (MBHBs), with a special focus on the latest developments in numerical simulations and General-Relativistic Magnetohydrodynamics (GRMHD) simulations in particular. We give a self-contained global picture of how to model accretion onto MBHBs, analyzing different aspects of the system such as the dynamics of the circumbinary disk, mini-disks, outflows, the role of magnetic fields, and electromagnetic signatures. We discuss important questions and open problems related to these systems, what are the advantages and disadvantages of the different numerical approaches, and what robust knowledge we have built from simulations.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
Euclid. V. The Flagship galaxy mock catalogue: a comprehensive simulation for the Euclid mission
Authors:
Euclid Collaboration,
F. J. Castander,
P. Fosalba,
J. Stadel,
D. Potter,
J. Carretero,
P. Tallada-Crespí,
L. Pozzetti,
M. Bolzonella,
G. A. Mamon,
L. Blot,
K. Hoffmann,
M. Huertas-Company,
P. Monaco,
E. J. Gonzalez,
G. De Lucia,
C. Scarlata,
M. -A. Breton,
L. Linke,
C. Viglione,
S. -S. Li,
Z. Zhai,
Z. Baghkhani,
K. Pardede,
C. Neissner
, et al. (344 additional authors not shown)
Abstract:
We present the Flagship galaxy mock, a simulated catalogue of billions of galaxies designed to support the scientific exploitation of the Euclid mission. Euclid is a medium-class mission of the European Space Agency optimised to determine the properties of dark matter and dark energy on the largest scales of the Universe. It probes structure formation over more than 10 billion years primarily from…
▽ More
We present the Flagship galaxy mock, a simulated catalogue of billions of galaxies designed to support the scientific exploitation of the Euclid mission. Euclid is a medium-class mission of the European Space Agency optimised to determine the properties of dark matter and dark energy on the largest scales of the Universe. It probes structure formation over more than 10 billion years primarily from the combination of weak gravitational lensing and galaxy clustering data. The breath of Euclid's data will also foster a wide variety of scientific analyses. The Flagship simulation was developed to provide a realistic approximation to the galaxies that will be observed by Euclid and used in its scientific analyses. We ran a state-of-the-art N-body simulation with four trillion particles, producing a lightcone on the fly. From the dark matter particles, we produced a catalogue of 16 billion haloes in one octant of the sky in the lightcone up to redshift z=3. We then populated these haloes with mock galaxies using a halo occupation distribution and abundance matching approach, calibrating the free parameters of the galaxy mock against observed correlations and other basic galaxy properties. Modelled galaxy properties include luminosity and flux in several bands, redshifts, positions and velocities, spectral energy distributions, shapes and sizes, stellar masses, star formation rates, metallicities, emission line fluxes, and lensing properties. We selected a final sample of 3.4 billion galaxies with a magnitude cut of H_E<26, where we are complete. We have performed a comprehensive set of validation tests to check the similarity to observational data and theoretical models. In particular, our catalogue is able to closely reproduce the main characteristics of the weak lensing and galaxy clustering samples to be used in the mission's main cosmological analysis. (abridged)
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Euclid. IV. The NISP Calibration Unit
Authors:
Euclid Collaboration,
F. Hormuth,
K. Jahnke,
M. Schirmer,
C. G. -Y. Lee,
T. Scott,
R. Barbier,
S. Ferriol,
W. Gillard,
F. Grupp,
R. Holmes,
W. Holmes,
B. Kubik,
J. Macias-Perez,
M. Laurent,
J. Marpaud,
M. Marton,
E. Medinaceli,
G. Morgante,
R. Toledo-Moreo,
M. Trifoglio,
Hans-Walter Rix,
A. Secroun,
M. Seiffert,
P. Stassi
, et al. (310 additional authors not shown)
Abstract:
The near-infrared calibration unit (NI-CU) onboard Euclid's Near-Infrared Spectrometer and Photometer (NISP) is the first astronomical calibration lamp based on light-emitting diodes (LEDs) to be operated in space. Euclid is a mission in ESA's 'Cosmic Vision 2015-2025' framework, to explore the dark universe and provide a next-level characterisation of the nature of gravitation, dark matter, and d…
▽ More
The near-infrared calibration unit (NI-CU) onboard Euclid's Near-Infrared Spectrometer and Photometer (NISP) is the first astronomical calibration lamp based on light-emitting diodes (LEDs) to be operated in space. Euclid is a mission in ESA's 'Cosmic Vision 2015-2025' framework, to explore the dark universe and provide a next-level characterisation of the nature of gravitation, dark matter, and dark energy. Calibrating photometric and spectrometric measurements of galaxies to better than 1.5% accuracy in a survey homogeneously map** ~14000 deg^2 of extragalactic sky requires a very detailed characterisation of near-infrared (NIR) detector properties, as well their constant monitoring in flight. To cover two of the main contributions - relative pixel-to-pixel sensitivity and non-linearity characteristics - as well as support other calibration activities, NI-CU was designed to provide spatially approximately homogeneous (<12% variations) and temporally stable illumination (0.1%-0.2% over 1200s) over the NISP detector plane, with minimal power consumption and energy dissipation. NI-CU is covers the spectral range ~[900,1900] nm - at cryo-operating temperature - at 5 fixed independent wavelengths to capture wavelength-dependent behaviour of the detectors, with fluence over a dynamic range of >=100 from ~15 ph s^-1 pixel^-1 to >1500 ph s^-1 pixel^-1. For this functionality, NI-CU is based on LEDs. We describe the rationale behind the decision and design process, describe the challenges in sourcing the right LEDs, as well as the qualification process and lessons learned. We also provide a description of the completed NI-CU, its capabilities and performance as well as its limits. NI-CU has been integrated into NISP and the Euclid satellite, and since Euclid's launch in July 2023 has started supporting survey operations.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Euclid. III. The NISP Instrument
Authors:
Euclid Collaboration,
K. Jahnke,
W. Gillard,
M. Schirmer,
A. Ealet,
T. Maciaszek,
E. Prieto,
R. Barbier,
C. Bonoli,
L. Corcione,
S. Dusini,
F. Grupp,
F. Hormuth,
S. Ligori,
L. Martin,
G. Morgante,
C. Padilla,
R. Toledo-Moreo,
M. Trifoglio,
L. Valenziano,
R. Bender,
F. J. Castander,
B. Garilli,
P. B. Lilje,
H. -W. Rix
, et al. (412 additional authors not shown)
Abstract:
The Near-Infrared Spectrometer and Photometer (NISP) on board the Euclid satellite provides multiband photometry and R>=450 slitless grism spectroscopy in the 950-2020nm wavelength range. In this reference article we illuminate the background of NISP's functional and calibration requirements, describe the instrument's integral components, and provide all its key properties. We also sketch the proc…
▽ More
The Near-Infrared Spectrometer and Photometer (NISP) on board the Euclid satellite provides multiband photometry and R>=450 slitless grism spectroscopy in the 950-2020nm wavelength range. In this reference article we illuminate the background of NISP's functional and calibration requirements, describe the instrument's integral components, and provide all its key properties. We also sketch the processes needed to understand how NISP operates and is calibrated, and its technical potentials and limitations. Links to articles providing more details and technical background are included. NISP's 16 HAWAII-2RG (H2RG) detectors with a plate scale of 0.3" pix^-1 deliver a field-of-view of 0.57deg^2. In photo mode, NISP reaches a limiting magnitude of ~24.5AB mag in three photometric exposures of about 100s exposure time, for point sources and with a signal-to-noise ratio (SNR) of 5. For spectroscopy, NISP's point-source sensitivity is a SNR = 3.5 detection of an emission line with flux ~2x10^-16erg/s/cm^2 integrated over two resolution elements of 13.4A, in 3x560s grism exposures at 1.6 mu (redshifted Ha). Our calibration includes on-ground and in-flight characterisation and monitoring of detector baseline, dark current, non-linearity, and sensitivity, to guarantee a relative photometric accuracy of better than 1.5%, and relative spectrophotometry to better than 0.7%. The wavelength calibration must be better than 5A. NISP is the state-of-the-art instrument in the NIR for all science beyond small areas available from HST and JWST - and an enormous advance due to its combination of field size and high throughput of telescope and instrument. During Euclid's 6-year survey covering 14000 deg^2 of extragalactic sky, NISP will be the backbone for determining distances of more than a billion galaxies. Its NIR data will become a rich reference imaging and spectroscopy data set for the coming decades.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Euclid. II. The VIS Instrument
Authors:
Euclid Collaboration,
M. Cropper,
A. Al-Bahlawan,
J. Amiaux,
S. Awan,
R. Azzollini,
K. Benson,
M. Berthe,
J. Boucher,
E. Bozzo,
C. Brockley-Blatt,
G. P. Candini,
C. Cara,
R. A. Chaudery,
R. E. Cole,
P. Danto,
J. Denniston,
A. M. Di Giorgio,
B. Dryer,
J. Endicott,
J. -P. Dubois,
M. Farina,
E. Galli,
L. Genolet,
J. P. D. Gow
, et al. (403 additional authors not shown)
Abstract:
This paper presents the specification, design, and development of the Visible Camera (VIS) on the ESA Euclid mission. VIS is a large optical-band imager with a field of view of 0.54 deg^2 sampled at 0.1" with an array of 609 Megapixels and spatial resolution of 0.18". It will be used to survey approximately 14,000 deg^2 of extragalactic sky to measure the distortion of galaxies in the redshift ran…
▽ More
This paper presents the specification, design, and development of the Visible Camera (VIS) on the ESA Euclid mission. VIS is a large optical-band imager with a field of view of 0.54 deg^2 sampled at 0.1" with an array of 609 Megapixels and spatial resolution of 0.18". It will be used to survey approximately 14,000 deg^2 of extragalactic sky to measure the distortion of galaxies in the redshift range z=0.1-1.5 resulting from weak gravitational lensing, one of the two principal cosmology probes of Euclid. With photometric redshifts, the distribution of dark matter can be mapped in three dimensions, and, from how this has changed with look-back time, the nature of dark energy and theories of gravity can be constrained. The entire VIS focal plane will be transmitted to provide the largest images of the Universe from space to date, reaching m_AB>24.5 with S/N >10 in a single broad I_E~(r+i+z) band over a six year survey. The particularly challenging aspects of the instrument are the control and calibration of observational biases, which lead to stringent performance requirements and calibration regimes. With its combination of spatial resolution, calibration knowledge, depth, and area covering most of the extra-Galactic sky, VIS will also provide a legacy data set for many other fields. This paper discusses the rationale behind the VIS concept and describes the instrument design and development before reporting the pre-launch performance derived from ground calibrations and brief results from the in-orbit commissioning. VIS should reach fainter than m_AB=25 with S/N>10 for galaxies of full-width half-maximum of 0.3" in a 1.3" diameter aperture over the Wide Survey, and m_AB>26.4 for a Deep Survey that will cover more than 50 deg^2. The paper also describes how VIS works with the other Euclid components of survey, telescope, and science data processing to extract the cosmological information.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Euclid. I. Overview of the Euclid mission
Authors:
Euclid Collaboration,
Y. Mellier,
Abdurro'uf,
J. A. Acevedo Barroso,
A. Achúcarro,
J. Adamek,
R. Adam,
G. E. Addison,
N. Aghanim,
M. Aguena,
V. Ajani,
Y. Akrami,
A. Al-Bahlawan,
A. Alavi,
I. S. Albuquerque,
G. Alestas,
G. Alguero,
A. Allaoui,
S. W. Allen,
V. Allevato,
A. V. Alonso-Tetilla,
B. Altieri,
A. Alvarez-Candal,
A. Amara,
L. Amendola
, et al. (1086 additional authors not shown)
Abstract:
The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14…
▽ More
The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14,000 deg^2 of extragalactic sky. In addition to accurate weak lensing and clustering measurements that probe structure formation over half of the age of the Universe, its primary probes for cosmology, these exquisite data will enable a wide range of science. This paper provides a high-level overview of the mission, summarising the survey characteristics, the various data-processing steps, and data products. We also highlight the main science objectives and expected performance.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Dynamical regimes of CCN activation in adiabatic air parcels
Authors:
Manuel Santos Gutiérrez,
Mickaël David Chekroun,
Ilan Koren
Abstract:
Ubiquitous, yet elusive to a complete understanding: Tiny, warm clouds with faint visual signatures play a critical role in Earth's energy balance. These "twilight clouds", as they are sometimes called, form under weak updraft conditions. Their constituent particles exist in a precarious state, teetering between hazy wisps and activated droplets. This delicate thermodynamic balance creates a limit…
▽ More
Ubiquitous, yet elusive to a complete understanding: Tiny, warm clouds with faint visual signatures play a critical role in Earth's energy balance. These "twilight clouds", as they are sometimes called, form under weak updraft conditions. Their constituent particles exist in a precarious state, teetering between hazy wisps and activated droplets. This delicate thermodynamic balance creates a limited reservoir of supersaturation, which activated droplets readily consume. Our research presents a novel approach, solving coupled equations for particle growth (Köhler's equation) and supersaturation change. This reveals previously unconsidered activation states for these clouds. Additionally, the analysis predicts conditions where particles can exhibit self-sustained oscillations between haze and activated droplet states.
△ Less
Submitted 19 May, 2024;
originally announced May 2024.
-
Imaging Spinor Bose Gasses Using Off-Axis Holography
Authors:
Nejc Blaznik,
Jasper Smits,
Marc Duran Gutierrez,
Peter van der Straten
Abstract:
We introduce a novel, non-invasive imaging technique based on spin-dependent off-axis holography (SOAH) for spin-1 Bose-Einstein condensates (BECs). Utilizing a dual reference beam strategy, this method records two orthogonal circular polarization components of a single probe beam. The circular birefringence of spin-polarized atoms induces differing complex phase shifts in the polarization compone…
▽ More
We introduce a novel, non-invasive imaging technique based on spin-dependent off-axis holography (SOAH) for spin-1 Bose-Einstein condensates (BECs). Utilizing a dual reference beam strategy, this method records two orthogonal circular polarization components of a single probe beam. The circular birefringence of spin-polarized atoms induces differing complex phase shifts in the polarization components of the light, which are reconstructed from the interference patterns captured on camera. Our approach enables spin- and density-resolved imaging of both phase and amplitude information \emph{in-situ} on a sub-millisecond time scale with minimal disturbance to the condensate. We explore the technique's efficacy under various background static fields, demonstrating its sensitivity to the quantization axis of the atoms and confirming its effectiveness.
△ Less
Submitted 16 May, 2024;
originally announced May 2024.
-
Exploring the limitations of blood pressure estimation using the photoplethysmography signal
Authors:
Felipe M. Dias,
Diego A. C. Cardenas,
Marcelo A. F. Toledo,
Filipe A. C. Oliveira,
Estela Ribeiro,
Jose E. Krieger,
Marco A. Gutierrez
Abstract:
Hypertension, a leading contributor to cardiovascular morbidity, underscores the need for accurate and continuous blood pressure (BP) monitoring. Photoplethysmography (PPG) presents a promising approach to this end. However, the precision of BP estimates derived from PPG signals has been the subject of ongoing debate, necessitating a comprehensive evaluation of their effectiveness and constraints.…
▽ More
Hypertension, a leading contributor to cardiovascular morbidity, underscores the need for accurate and continuous blood pressure (BP) monitoring. Photoplethysmography (PPG) presents a promising approach to this end. However, the precision of BP estimates derived from PPG signals has been the subject of ongoing debate, necessitating a comprehensive evaluation of their effectiveness and constraints. We developed a calibration-based Siamese ResNet model for BP estimation, using a signal input paired with a reference BP reading. We compared the use of normalized PPG (N-PPG) against the normalized Invasive Arterial Blood Pressure (N-IABP) signals as input. The N-IABP signals do not directly present systolic and diastolic values but theoretically provide a more accurate BP measure than PPG signals since it is a direct pressure sensor inside the body. Our strategy establishes a critical benchmark for PPG performance, realistically calibrating expectations for PPG's BP estimation capabilities. Nonetheless, we compared the performance of our models using different signal-filtering conditions to evaluate the impact of filtering on the results. We evaluated our method using the AAMI and the BHS standards employing the VitalDB dataset. The N-IABP signals meet with AAMI standards for both Systolic Blood Pressure (SBP) and Diastolic Blood Pressure (DBP), with errors of 1.29+-6.33mmHg for systolic pressure and 1.17+-5.78mmHg for systolic and diastolic pressure respectively for the raw N-IABP signal. In contrast, N-PPG signals, in their best setup, exhibited inferior performance than N-IABP, presenting 1.49+-11.82mmHg and 0.89+-7.27mmHg for systolic and diastolic pressure respectively. Our findings highlight the potential and limitations of employing PPG for BP estimation, showing that these signals contain information correlated to BP but may not be sufficient for predicting it accurately.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Search for Neutrino Emission from GRB 221009A using the KM3NeT ARCA and ORCA detectors
Authors:
S. Aiello,
A. Albert,
M. Alshamsi,
S. Alves Garre,
A. Ambrosone,
F. Ameli,
M. Andre,
E. Androutsou,
M. Anguita,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardačová,
B. Baret,
A. Bariego-Quintana,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
D. M. Benoit
, et al. (251 additional authors not shown)
Abstract:
Gamma-ray bursts are promising candidate sources of high-energy astrophysical neutrinos. The recent GRB 221009A event, identified as the brightest gamma-ray burst ever detected, provides a unique opportunity to investigate hadronic emissions involving neutrinos. The KM3NeT undersea neutrino detectors participated in the worldwide follow-up effort triggered by the event, searching for neutrino even…
▽ More
Gamma-ray bursts are promising candidate sources of high-energy astrophysical neutrinos. The recent GRB 221009A event, identified as the brightest gamma-ray burst ever detected, provides a unique opportunity to investigate hadronic emissions involving neutrinos. The KM3NeT undersea neutrino detectors participated in the worldwide follow-up effort triggered by the event, searching for neutrino events. In this letter, we summarize subsequent searches, in a wide energy range from MeV up to a few PeVs. No neutrino events are found in any of the searches performed. Upper limits on the neutrino emission associated with GRB 221009A are computed.
△ Less
Submitted 30 April, 2024; v1 submitted 8 April, 2024;
originally announced April 2024.
-
Improved performance of the Bacon-Shor code with Steane's syndrome extraction method
Authors:
Guillermo Escobar-Arrieta,
Mauricio Gutiérrez
Abstract:
We compare Steane's and Shor's syndrome extraction methods on the Bacon-Shor code. We propose a straightforward strategy based on post-selection to prepare the logical $|0\rangle_L$ and $|+\rangle_L$ states of the Bacon-Shor code by using flag-like qubits to verify their constituent Greenberger-Horne-Zeilinger states. We perform stabilizer simulations with a depolarizing Pauli error model and find…
▽ More
We compare Steane's and Shor's syndrome extraction methods on the Bacon-Shor code. We propose a straightforward strategy based on post-selection to prepare the logical $|0\rangle_L$ and $|+\rangle_L$ states of the Bacon-Shor code by using flag-like qubits to verify their constituent Greenberger-Horne-Zeilinger states. We perform stabilizer simulations with a depolarizing Pauli error model and find that Steane's method significantly outperforms Shor's. Not only does Steane's method result in pseudo-thresholds that are about 1 order of magnitude higher than Shor's, but also its advantage increases monotonically as we go from a distance-3 to a distance-9 Bacon-Shor code. The advantage of Steane's method is the greatest in the regime where gate errors dominate over measurement errors. Some of the circuit constructions we propose for Steane's method are not formally fault-tolerant, yet outperform the formally fault-tolerant Shor's protocols for experimentally relevant physical error rates. This suggest that constructing formally fault-tolerant circuits that maintain the full code distance is not strictly necessary to guarantee the usefulness of a quantum error-correcting protocol. Despite relying on post-selection, we find that our methods can be efficient. These protocols would be naturally implementable on a platform with long-range qubit interactions like trapped ions or neutral atoms.
△ Less
Submitted 3 March, 2024;
originally announced March 2024.
-
Astronomy potential of KM3NeT/ARCA
Authors:
S. Aiello,
A. Albert,
M. Alshamsi,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
E. Androutsou,
M. Anguita,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardacová,
B. Baret,
A. Bariego-Quintana,
A. Baruzzi,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman,
F. Benfenati
, et al. (253 additional authors not shown)
Abstract:
The KM3NeT/ARCA neutrino detector is currently under construction at 3500 m depth offshore Capo Passero, Sicily, in the Mediterranean Sea. The main science objectives are the detection of high-energy cosmic neutrinos and the discovery of their sources. Simulations were conducted for the full KM3NeT/ARCA detector, instrumenting a volume of 1 km$^3$, to estimate the sensitivity and discovery potenti…
▽ More
The KM3NeT/ARCA neutrino detector is currently under construction at 3500 m depth offshore Capo Passero, Sicily, in the Mediterranean Sea. The main science objectives are the detection of high-energy cosmic neutrinos and the discovery of their sources. Simulations were conducted for the full KM3NeT/ARCA detector, instrumenting a volume of 1 km$^3$, to estimate the sensitivity and discovery potential to point-like neutrino sources and an all-sky diffuse neutrino flux. This paper covers the reconstruction of track- and shower-like signatures, as well as the criteria employed for neutrino event selection. By leveraging both the track and shower observation channels, the KM3NeT/ARCA detector demonstrates the capability to detect the diffuse astrophysical neutrino flux within half a year of operation, achieving a 5$σ$ statistical significance. With an angular resolution below 0.1$^\circ$ for tracks and under 2$^\circ$ for showers, the sensitivity to point-like neutrino sources surpasses existing observed limits across the entire sky.
△ Less
Submitted 29 March, 2024; v1 submitted 13 February, 2024;
originally announced February 2024.
-
Orbits and Dynamical Masses for the Active Hyades Multiple System HD 284163
Authors:
Guillermo Torres,
Gail H. Schaefer,
Robert P. Stefanik,
David W. Latham,
Jeremy Jones,
Cyprien Lanthermann,
John D. Monnier,
Stefan Kraus,
Narsireddy Anugu,
Theo ten Brummelaar,
Sorabh Chhabra,
Isabelle Codron,
Jacob Ennis,
Tyler Gardner,
Mayra Gutierrez,
Noura Ibrahim,
Aaron Labdon,
Dan Mortimer,
Benjamin R. Setterholm
Abstract:
We report near-infrared long-baseline interferometric observations of the Hyades multiple system HD 284163, made with the CHARA array, as well as almost 43 yr of high-resolution spectroscopic monitoring at the CfA. Both types of observations resolve the 2.39 d inner binary, and also an outer companion in a 43.1 yr orbit. Our observations, combined with others from the literature, allow us to solve…
▽ More
We report near-infrared long-baseline interferometric observations of the Hyades multiple system HD 284163, made with the CHARA array, as well as almost 43 yr of high-resolution spectroscopic monitoring at the CfA. Both types of observations resolve the 2.39 d inner binary, and also an outer companion in a 43.1 yr orbit. Our observations, combined with others from the literature, allow us to solve for the 3D inner and outer orbits, which are found to be at nearly right angles to each other. We determine the dynamical masses of the three stars (good to better than 1.4% for the inner pair), as well as the orbital parallax. The secondary component (0.5245 +/- 0.0047 MSun) is now the lowest mass star with a dynamical mass measurement in the cluster. A comparison of these measurements with current stellar evolution models for the age and metallicity of the Hyades shows good agreement. All three stars display significant levels of chromospheric activity, consistent with the classification of HD 284163 as an RS CVn object. We present evidence that a more distant fourth star is physically associated, making this a hierarchical quadruple system.
△ Less
Submitted 8 December, 2023;
originally announced December 2023.
-
The Power Board of the KM3NeT Digital Optical Module: design, upgrade, and production
Authors:
S. Aiello,
A. Albert,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
E. Androutsou,
M. Anguita,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardacova,
B. Baret,
A. Bariego Quintana,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
D. M. Benoit
, et al. (259 additional authors not shown)
Abstract:
The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant gl…
▽ More
The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant glass sphere. The module includes also calibration instruments and electronics for power, readout and data acquisition. The power board was developed to supply power to all the elements of the digital optical module. The design of the power board began in 2013, and several prototypes were produced and tested. After an exhaustive validation process in various laboratories within the KM3NeT Collaboration, a mass production batch began, resulting in the construction of over 1200 power boards so far. These boards were integrated in the digital optical modules that have already been produced and deployed, 828 until October 2023. In 2017, an upgrade of the power board, to increase reliability and efficiency, was initiated. After the validation of a pre-production series, a production batch of 800 upgraded boards is currently underway. This paper describes the design, architecture, upgrade, validation, and production of the power board, including the reliability studies and tests conducted to ensure the safe operation at the bottom of the Mediterranean Sea throughout the observatory's lifespan
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
Searches for neutrino counterparts of gravitational waves from the LIGO/Virgo third observing run with KM3NeT
Authors:
KM3NeT Collaboration,
S. Aiello,
A. Albert,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
E. Androutsou,
M. Anguita,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
L. Bailly-Salins,
Z. Bardačová,
B. Baret,
A. Bariego-Quintana,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
D. M. Benoit
, et al. (251 additional authors not shown)
Abstract:
The KM3NeT neutrino telescope is currently being deployed at two different sites in the Mediterranean Sea. First searches for astrophysical neutrinos have been performed using data taken with the partial detector configuration already in operation. The paper presents the results of two independent searches for neutrinos from compact binary mergers detected during the third observing run of the LIG…
▽ More
The KM3NeT neutrino telescope is currently being deployed at two different sites in the Mediterranean Sea. First searches for astrophysical neutrinos have been performed using data taken with the partial detector configuration already in operation. The paper presents the results of two independent searches for neutrinos from compact binary mergers detected during the third observing run of the LIGO and Virgo gravitational wave interferometers. The first search looks for a global increase in the detector counting rates that could be associated with inverse beta decay events generated by MeV-scale electron anti-neutrinos. The second one focuses on upgoing track-like events mainly induced by muon (anti-)neutrinos in the GeV--TeV energy range. Both searches yield no significant excess for the sources in the gravitational wave catalogs. For each source, upper limits on the neutrino flux and on the total energy emitted in neutrinos in the respective energy ranges have been set. Stacking analyses of binary black hole mergers and neutron star-black hole mergers have also been performed to constrain the characteristic neutrino emission from these categories.
△ Less
Submitted 7 May, 2024; v1 submitted 7 November, 2023;
originally announced November 2023.
-
Transferability and explainability of deep learning emulators for regional climate model projections: Perspectives for future applications
Authors:
Jorge Bano-Medina,
Maialen Iturbide,
Jesus Fernandez,
Jose Manuel Gutierrez
Abstract:
Regional climate models (RCMs) are essential tools for simulating and studying regional climate variability and change. However, their high computational cost limits the production of comprehensive ensembles of regional climate projections covering multiple scenarios and driving Global Climate Models (GCMs) across regions. RCM emulators based on deep learning models have recently been introduced a…
▽ More
Regional climate models (RCMs) are essential tools for simulating and studying regional climate variability and change. However, their high computational cost limits the production of comprehensive ensembles of regional climate projections covering multiple scenarios and driving Global Climate Models (GCMs) across regions. RCM emulators based on deep learning models have recently been introduced as a cost-effective and promising alternative that requires only short RCM simulations to train the models. Therefore, evaluating their transferability to different periods, scenarios, and GCMs becomes a pivotal and complex task in which the inherent biases of both GCMs and RCMs play a significant role. Here we focus on this problem by considering the two different emulation approaches proposed in the literature (PP and MOS, following the terminology introduced in this paper). In addition to standard evaluation techniques, we expand the analysis with methods from the field of eXplainable Artificial Intelligence (XAI), to assess the physical consistency of the empirical links learnt by the models. We find that both approaches are able to emulate certain climatological properties of RCMs for different periods and scenarios (soft transferability), but the consistency of the emulation functions differ between approaches. Whereas PP learns robust and physically meaningful patterns, MOS results are GCM-dependent and lack physical consistency in some cases. Both approaches face problems when transferring the emulation function to other GCMs, due to the existence of GCM-dependent biases (hard transferability). This limits their applicability to build ensembles of regional climate projections. We conclude by giving some prospects for future applications.
△ Less
Submitted 31 October, 2023;
originally announced November 2023.
-
A Review of Digital Twins and their Application in Cybersecurity based on Artificial Intelligence
Authors:
MohammadHossein Homaei,
Oscar Mogollon Gutierrez,
Jose Carlos Sancho Nunez,
Mar Avila Vegas,
Andres Caro Lindo
Abstract:
The potential of digital twin technology is yet to be fully realized due to its diversity and untapped potential. Digital twins enable systems' analysis, design, optimization, and evolution to be performed digitally or in conjunction with a cyber-physical approach to improve speed, accuracy, and efficiency over traditional engineering methods. Industry 4.0, factories of the future, and digital twi…
▽ More
The potential of digital twin technology is yet to be fully realized due to its diversity and untapped potential. Digital twins enable systems' analysis, design, optimization, and evolution to be performed digitally or in conjunction with a cyber-physical approach to improve speed, accuracy, and efficiency over traditional engineering methods. Industry 4.0, factories of the future, and digital twins continue to benefit from the technology and provide enhanced efficiency within existing systems. Due to the lack of information and security standards associated with the transition to cyber digitization, cybercriminals have been able to take advantage of the situation. Access to a digital twin of a product or service is equivalent to threatening the entire collection. There is a robust interaction between digital twins and artificial intelligence tools, which leads to strong interaction between these technologies, so it can be used to improve the cybersecurity of these digital platforms based on their integration with these technologies. This study aims to investigate the role of artificial intelligence in providing cybersecurity for digital twin versions of various industries, as well as the risks associated with these versions. In addition, this research serves as a road map for researchers and others interested in cybersecurity and digital security.
△ Less
Submitted 2 November, 2023;
originally announced November 2023.
-
Epitaxial Growth of Boron Carbide on 4H-SiC
Authors:
Yamina Benamra,
Laurent Auvray,
Jérôme Andrieux,
François Cauwet,
Maria-Paz Alegre,
Fernando Lloret,
Daniel Araujo,
Marina Gutierrez,
Gabriel Ferro
Abstract:
In this work, the successful heteroepitaxial growth of boron carbide (B x C) on 4HSiC(0001) 4{\textdegree} off substrate using chemical vapor deposition (CVD) is reported. Towards this end, a two-step procedure was developed, involving the 4H-SiC substrate boridation under BCl 3 precursor at 1200{\textdegree}C, followed by conventional CVD under BCl 3 + C 3 H 8 at 1600{\textdegree}C. Such a proced…
▽ More
In this work, the successful heteroepitaxial growth of boron carbide (B x C) on 4HSiC(0001) 4{\textdegree} off substrate using chemical vapor deposition (CVD) is reported. Towards this end, a two-step procedure was developed, involving the 4H-SiC substrate boridation under BCl 3 precursor at 1200{\textdegree}C, followed by conventional CVD under BCl 3 + C 3 H 8 at 1600{\textdegree}C. Such a procedure allowed obtaining reproducibly monocrystalline (0001) oriented films of B x C with a step flow morphology at a growth rate of 1.9 $μ$m/h. Without the boridation step, the layers are systematically polycrystalline. The study of the epitaxial growth mechanism shows that a monocrystalline B x C layer is formed after boridation but covered with a B-and Si-containing amorphous layer. Upon heating up to 1600{\textdegree}C, under pure H 2 atmosphere, the amorphous layer was converted into epitaxial B x C and transient surface SiB x and Si crystallites. These crystallites disappear upon CVD growth.
△ Less
Submitted 26 October, 2023;
originally announced October 2023.
-
Beware of CaBER: Filament thinning rheometry doesn't give `the' relaxation time of polymer solutions
Authors:
Antoine Gaillard,
Miguel Angel Herrada Gutierrez,
Antoine Deblais,
Jens Eggers,
Daniel Bonn
Abstract:
The viscoelastic relaxation time of a polymer solution is often measured using Capillary Breakup Extensional Rheometry (CaBER) where a droplet is placed between two plates which are pulled apart to form a thinning filament. For a slow plate retraction protocol, required to avoid inertio-capillary oscillations for low-viscosity liquids, we show experimentally that the CaBER relaxation time $τ_e$ in…
▽ More
The viscoelastic relaxation time of a polymer solution is often measured using Capillary Breakup Extensional Rheometry (CaBER) where a droplet is placed between two plates which are pulled apart to form a thinning filament. For a slow plate retraction protocol, required to avoid inertio-capillary oscillations for low-viscosity liquids, we show experimentally that the CaBER relaxation time $τ_e$ inferred from the exponential thinning regime is in fact an apparent relaxation time that increases significantly when increasing the plate diameter and the droplet volume. Similarly, we observe that $τ_e$ increases with the plate diameter for the classical step-strain plate separation protocol of a commercial (Haake) CaBER device and increases with the nozzle diameter for a Drip**-onto-Substrate (DoS) method. This dependence on the flow history before the formation of the viscoelastic filament is in contradiction with polymer models such as Oldroyd-B that predict a filament thinning rate $1/3τ$ ($τ$ being the model's relaxation time) which is a material property independent of geometrical factors. We show that this is not due to artefacts such as solvent evaporation or polymer degradation and that it can only be rationalised by finite extensibility effects (FENE-P model) for a dilute polymer solution in a viscous solvent, but not for semi-dilute solutions in a low-viscosity solvent.
△ Less
Submitted 6 May, 2024; v1 submitted 15 September, 2023;
originally announced September 2023.
-
Prospects for combined analyses of hadronic emission from $γ$-ray sources in the Milky Way with CTA and KM3NeT
Authors:
T. Unbehaun,
L. Mohrmann,
S. Funk,
S. Aiello,
A. Albert,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
E. Androutsou,
M. Anghinolfi,
M. Anguita,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
C. Bagatelas,
L. Bailly-Salins,
Z. Bardačová,
B. Baret,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman
, et al. (249 additional authors not shown)
Abstract:
The Cherenkov Telescope Array and the KM3NeT neutrino telescopes are major upcoming facilities in the fields of $γ$-ray and neutrino astronomy, respectively. Possible simultaneous production of $γ$ rays and neutrinos in astrophysical accelerators of cosmic-ray nuclei motivates a combination of their data. We assess the potential of a combined analysis of CTA and KM3NeT data to determine the contri…
▽ More
The Cherenkov Telescope Array and the KM3NeT neutrino telescopes are major upcoming facilities in the fields of $γ$-ray and neutrino astronomy, respectively. Possible simultaneous production of $γ$ rays and neutrinos in astrophysical accelerators of cosmic-ray nuclei motivates a combination of their data. We assess the potential of a combined analysis of CTA and KM3NeT data to determine the contribution of hadronic emission processes in known Galactic $γ$-ray emitters, comparing this result to the cases of two separate analyses. In doing so, we demonstrate the capability of Gammapy, an open-source software package for the analysis of $γ$-ray data, to also process data from neutrino telescopes. For a selection of prototypical $γ$-ray sources within our Galaxy, we obtain models for primary proton and electron spectra in the hadronic and leptonic emission scenario, respectively, by fitting published $γ$-ray spectra. Using these models and instrument response functions for both detectors, we employ the Gammapy package to generate pseudo data sets, where we assume 200 hours of CTA observations and 10 years of KM3NeT detector operation. We then apply a three-dimensional binned likelihood analysis to these data sets, separately for each instrument and jointly for both. We find that the largest benefit of the combined analysis lies in the possibility of a consistent modelling of the $γ$-ray and neutrino emission. Assuming a purely leptonic scenario as input, we obtain, for the most favourable source, an average expected 68% credible interval that constrains the contribution of hadronic processes to the observed $γ$-ray emission to below 15%.
△ Less
Submitted 2 February, 2024; v1 submitted 6 September, 2023;
originally announced September 2023.
-
Monochromatic neutrinos from dark matter through the Higgs portal
Authors:
Pablo de la Torre,
Miguel Gutiérrez,
Manuel Masip
Abstract:
We define a minimal model of dark matter with a fermion singlet $χ$ coupled to the visible sector through the Higgs portal and with a heavy Dirac neutrino $N$ that opens the annihilation channel $χχ\to N ν$. The model provides the observed relic abundance consistently with bounds from direct searches and implies a monochromatic neutrino signal at 10 GeV-1 TeV in indirect searches. In particular, w…
▽ More
We define a minimal model of dark matter with a fermion singlet $χ$ coupled to the visible sector through the Higgs portal and with a heavy Dirac neutrino $N$ that opens the annihilation channel $χχ\to N ν$. The model provides the observed relic abundance consistently with bounds from direct searches and implies a monochromatic neutrino signal at 10 GeV-1 TeV in indirect searches. In particular, we obtain the capture rate of $χ$ by the Sun and show that the signal could be above the "neutrino floor" produced by cosmic rays showering in the solar surface. In most benchmark models this solar astrophysical background is above the expected dark matter signal, so the model that we propose is a canonical example of WIMP not excluded by direct searches that could be studied at neutrino telescopes and also at colliders.
△ Less
Submitted 1 September, 2023;
originally announced September 2023.
-
A machine-learning sleep-wake classification model using a reduced number of features derived from photoplethysmography and activity signals
Authors:
Douglas A. Almeida,
Felipe M. Dias,
Marcelo A. F. Toledo,
Diego A. C. Cardenas,
Filipe A. C. Oliveira,
Estela Ribeiro,
Jose E. Krieger,
Marco A. Gutierrez
Abstract:
Sleep is a crucial aspect of our overall health and well-being. It plays a vital role in regulating our mental and physical health, impacting our mood, memory, and cognitive function to our physical resilience and immune system. The classification of sleep stages is a mandatory step to assess sleep quality, providing the metrics to estimate the quality of sleep and how well our body is functioning…
▽ More
Sleep is a crucial aspect of our overall health and well-being. It plays a vital role in regulating our mental and physical health, impacting our mood, memory, and cognitive function to our physical resilience and immune system. The classification of sleep stages is a mandatory step to assess sleep quality, providing the metrics to estimate the quality of sleep and how well our body is functioning during this essential period of rest. Photoplethysmography (PPG) has been demonstrated to be an effective signal for sleep stage inference, meaning it can be used on its own or in a combination with others signals to determine sleep stage. This information is valuable in identifying potential sleep issues and develo** strategies to improve sleep quality and overall health. In this work, we present a machine learning sleep-wake classification model based on the eXtreme Gradient Boosting (XGBoost) algorithm and features extracted from PPG signal and activity counts. The performance of our method was comparable to current state-of-the-art methods with a Sensitivity of 91.15 $\pm$ 1.16%, Specificity of 53.66 $\pm$ 1.12%, F1-score of 83.88 $\pm$ 0.56%, and Kappa of 48.0 $\pm$ 0.86%. Our method offers a significant improvement over other approaches as it uses a reduced number of features, making it suitable for implementation in wearable devices that have limited computational power.
△ Less
Submitted 7 August, 2023;
originally announced August 2023.
-
Machine Learning-Based Diabetes Detection Using Photoplethysmography Signal Features
Authors:
Filipe A. C. Oliveira,
Felipe M. Dias,
Marcelo A. F. Toledo,
Diego A. C. Cardenas,
Douglas A. Almeida,
Estela Ribeiro,
Jose E. Krieger,
Marco A. Gutierrez
Abstract:
Diabetes is a prevalent chronic condition that compromises the health of millions of people worldwide. Minimally invasive methods are needed to prevent and control diabetes but most devices for measuring glucose levels are invasive and not amenable for continuous monitoring. Here, we present an alternative method to overcome these shortcomings based on non-invasive optical photoplethysmography (PP…
▽ More
Diabetes is a prevalent chronic condition that compromises the health of millions of people worldwide. Minimally invasive methods are needed to prevent and control diabetes but most devices for measuring glucose levels are invasive and not amenable for continuous monitoring. Here, we present an alternative method to overcome these shortcomings based on non-invasive optical photoplethysmography (PPG) for detecting diabetes. We classify non-Diabetic and Diabetic patients using the PPG signal and metadata for training Logistic Regression (LR) and eXtreme Gradient Boosting (XGBoost) algorithms. We used PPG signals from a publicly available dataset. To prevent overfitting, we divided the data into five folds for cross-validation. By ensuring that patients in the training set are not in the testing set, the model's performance can be evaluated on unseen subjects' data, providing a more accurate assessment of its generalization. Our model achieved an F1-Score and AUC of $58.8\pm20.0\%$ and $79.2\pm15.0\%$ for LR and $51.7\pm16.5\%$ and $73.6\pm17.0\%$ for XGBoost, respectively. Feature analysis suggested that PPG morphological features contains diabetes-related information alongside metadata. Our findings are within the same range reported in the literature, indicating that machine learning methods are promising for develo** remote, non-invasive, and continuous measurement devices for detecting and preventing diabetes.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
Multi-variable Hard Physical Constraints for Climate Model Downscaling
Authors:
Jose González-Abad,
Álex Hernández-García,
Paula Harder,
David Rolnick,
José Manuel Gutiérrez
Abstract:
Global Climate Models (GCMs) are the primary tool to simulate climate evolution and assess the impacts of climate change. However, they often operate at a coarse spatial resolution that limits their accuracy in reproducing local-scale phenomena. Statistical downscaling methods leveraging deep learning offer a solution to this problem by approximating local-scale climate fields from coarse variable…
▽ More
Global Climate Models (GCMs) are the primary tool to simulate climate evolution and assess the impacts of climate change. However, they often operate at a coarse spatial resolution that limits their accuracy in reproducing local-scale phenomena. Statistical downscaling methods leveraging deep learning offer a solution to this problem by approximating local-scale climate fields from coarse variables, thus enabling regional GCM projections. Typically, climate fields of different variables of interest are downscaled independently, resulting in violations of fundamental physical properties across interconnected variables. This study investigates the scope of this problem and, through an application on temperature, lays the foundation for a framework introducing multi-variable hard constraints that guarantees physical relationships between groups of downscaled climate variables.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
Embedded Software of the KM3NeT Central Logic Board
Authors:
S. Aiello,
A. Albert,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
E. Androutsou,
M. Anghinolfi,
M. Anguita,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
C. Bagatelas,
L. Bailly-Salins,
Z. Bardačová,
B. Baret,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
D. M. Benoit
, et al. (249 additional authors not shown)
Abstract:
The KM3NeT Collaboration is building and operating two deep sea neutrino telescopes at the bottom of the Mediterranean Sea. The telescopes consist of latices of photomultiplier tubes housed in pressure-resistant glass spheres, called digital optical modules and arranged in vertical detection units. The two main scientific goals are the determination of the neutrino mass ordering and the discovery…
▽ More
The KM3NeT Collaboration is building and operating two deep sea neutrino telescopes at the bottom of the Mediterranean Sea. The telescopes consist of latices of photomultiplier tubes housed in pressure-resistant glass spheres, called digital optical modules and arranged in vertical detection units. The two main scientific goals are the determination of the neutrino mass ordering and the discovery and observation of high-energy neutrino sources in the Universe. Neutrinos are detected via the Cherenkov light, which is induced by charged particles originated in neutrino interactions. The photomultiplier tubes convert the Cherenkov light into electrical signals that are acquired and timestamped by the acquisition electronics. Each optical module houses the acquisition electronics for collecting and timestam** the photomultiplier signals with one nanosecond accuracy. Once finished, the two telescopes will have installed more than six thousand optical acquisition nodes, completing one of the more complex networks in the world in terms of operation and synchronization. The embedded software running in the acquisition nodes has been designed to provide a framework that will operate with different hardware versions and functionalities. The hardware will not be accessible once in operation, which complicates the embedded software architecture. The embedded software provides a set of tools to facilitate remote manageability of the deployed hardware, including safe reconfiguration of the firmware. This paper presents the architecture and the techniques, methods and implementation of the embedded software running in the acquisition nodes of the KM3NeT neutrino telescopes.
△ Less
Submitted 12 October, 2023; v1 submitted 2 August, 2023;
originally announced August 2023.
-
Minimal numerical ingredients describe chemical microswimmers's 3D motion
Authors:
Maximilian R. Bailey,
C. Miguel Barriuso Gutiérrez,
José Martín-Roca,
Vincent Niggel,
Virginia Carrasco-Fadanelli,
Ivo Buttinoni,
Ignacio Pagonabarraga,
Lucio Isa,
Chantal Valeriani
Abstract:
The underlying mechanisms and physics of catalytic Janus microswimmers is highly complex, requiring details of the associated phoretic fields and the physiochemical properties of catalyst, particle, boundaries, and the fuel used. Therefore, develo** a minimal (and more general) model capable of capturing the overall dynamics of these autonomous particles is highly desirable. In the presented wor…
▽ More
The underlying mechanisms and physics of catalytic Janus microswimmers is highly complex, requiring details of the associated phoretic fields and the physiochemical properties of catalyst, particle, boundaries, and the fuel used. Therefore, develo** a minimal (and more general) model capable of capturing the overall dynamics of these autonomous particles is highly desirable. In the presented work, we demonstrate that a coarse-grained dissipative particle-hydrodynamics model is capable of describing the behaviour of various chemical microswimmer systems. Specifically, we show how a competing balance between hydrodynamic interactions experienced by a squirmer in the presence of a substrate, gravity, and mass and shape asymmetries can reproduce a range of dynamics seen in different experimental systems. We hope that our general model will inspire further synthetic work where various modes of swimmer motion can be encoded via shape and mass during fabrication, hel** to realise the still outstanding goal of microswimmers capable of complex 3-D behaviour
△ Less
Submitted 30 July, 2023;
originally announced July 2023.
-
Quality Assessment of Photoplethysmography Signals For Cardiovascular Biomarkers Monitoring Using Wearable Devices
Authors:
Felipe M. Dias,
Marcelo A. F. Toledo,
Diego A. C. Cardenas,
Douglas A. Almeida,
Filipe A. C. Oliveira,
Estela Ribeiro,
Jose E. Krieger,
Marco A. Gutierrez
Abstract:
Photoplethysmography (PPG) is a non-invasive technology that measures changes in blood volume in the microvascular bed of tissue. It is commonly used in medical devices such as pulse oximeters and wrist worn heart rate monitors to monitor cardiovascular hemodynamics. PPG allows for the assessment of parameters (e.g., heart rate, pulse waveform, and peripheral perfusion) that can indicate condition…
▽ More
Photoplethysmography (PPG) is a non-invasive technology that measures changes in blood volume in the microvascular bed of tissue. It is commonly used in medical devices such as pulse oximeters and wrist worn heart rate monitors to monitor cardiovascular hemodynamics. PPG allows for the assessment of parameters (e.g., heart rate, pulse waveform, and peripheral perfusion) that can indicate conditions such as vasoconstriction or vasodilation, and provides information about microvascular blood flow, making it a valuable tool for monitoring cardiovascular health. However, PPG is subject to a number of sources of variations that can impact its accuracy and reliability, especially when using a wearable device for continuous monitoring, such as motion artifacts, skin pigmentation, and vasomotion. In this study, we extracted 27 statistical features from the PPG signal for training machine-learning models based on gradient boosting (XGBoost and CatBoost) and Random Forest (RF) algorithms to assess quality of PPG signals that were labeled as good or poor quality. We used the PPG time series from a publicly available dataset and evaluated the algorithm s performance using Sensitivity (Se), Positive Predicted Value (PPV), and F1-score (F1) metrics. Our model achieved Se, PPV, and F1-score of 94.4, 95.6, and 95.0 for XGBoost, 94.7, 95.9, and 95.3 for CatBoost, and 93.7, 91.3 and 92.5 for RF, respectively. Our findings are comparable to state-of-the-art reported in the literature but using a much simpler model, indicating that ML models are promising for develo** remote, non-invasive, and continuous measurement devices.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
Steady-state supersaturation distributions for clouds under turbulent forcing
Authors:
Manuel Santos Gutiérrez,
Kalli Furtado
Abstract:
The supersaturation equation for a vertically moving adiabatic cloud parcel is analysed. The effects of turbulent updrafts are incorporated in the shape of a stochastic Lagrangian model, with spatial and time correlations expressed in terms of turbulent kinetic energy. Using the Fokker-Planck equation, the steady-state probability distributions of supersaturation are analytically computed for a nu…
▽ More
The supersaturation equation for a vertically moving adiabatic cloud parcel is analysed. The effects of turbulent updrafts are incorporated in the shape of a stochastic Lagrangian model, with spatial and time correlations expressed in terms of turbulent kinetic energy. Using the Fokker-Planck equation, the steady-state probability distributions of supersaturation are analytically computed for a number of approximations involving the timescale separation between updraft fluctuations and phase-relaxation, multiplicative noise simplification and droplet or ice particle size fluctuations. While the analytical results are presented in general for single-phase clouds, the calculated distributions are used to compute mixed-phase cloud properties -- mixed fraction and mean liquid water content in an initially icy cloud -- and are argued to be useful for generalising and constructing new parametrisation schemes.
△ Less
Submitted 4 May, 2023;
originally announced May 2023.
-
Computing the hull and interval numbers in the weakly toll convexity
Authors:
Mitre C. Dourado,
Marisa Gutierrez,
Fábio Protti,
Silvia Tondato
Abstract:
A walk $u_0u_1 \ldots u_{k-1}u_k$ of a graph $G$ is a \textit{weakly toll walk} if $u_0u_k \not\in E(G)$, $u_0u_i \in E(G)$ implies $u_i = u_1$, and $u_ju_k\in E(G)$ implies $u_j=u_{k-1}$. The {\em weakly toll interval} of a set $S \subseteq V(G)$, denoted by $I(S)$, is formed by $S$ and the vertices belonging to some weakly toll walk between two vertices of $S$. Set $S$ is {\it weakly toll convex…
▽ More
A walk $u_0u_1 \ldots u_{k-1}u_k$ of a graph $G$ is a \textit{weakly toll walk} if $u_0u_k \not\in E(G)$, $u_0u_i \in E(G)$ implies $u_i = u_1$, and $u_ju_k\in E(G)$ implies $u_j=u_{k-1}$. The {\em weakly toll interval} of a set $S \subseteq V(G)$, denoted by $I(S)$, is formed by $S$ and the vertices belonging to some weakly toll walk between two vertices of $S$. Set $S$ is {\it weakly toll convex} if $I(S) = S$. The {\em weakly toll convex hull} of $S$, denote by $H(S)$, is the minimum weakly toll convex set containing $S$. The {\em weakly toll interval number} of $G$ is the minimum cardinality of a set $S \subseteq V(G)$ such that $I(S) = V(G)$; and the {\em weakly toll hull number} of $G$ is the minimum cardinality of a set $S \subseteq V(G)$ such that $H(S) = V(G)$. In this work, we show how to compute the weakly toll interval and the weakly toll hull numbers of a graph in polynomial time. In contrast, we show that determining the weakly toll convexity number of a graph $G$ (the size of a maximum weakly toll convex set distinct from $V(G)$) is \NP-hard.
△ Less
Submitted 13 March, 2023;
originally announced March 2023.
-
Probing invisible neutrino decay with KM3NeT-ORCA
Authors:
KM3NeT Collaboration,
S. Aiello,
A. Albert,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
M. Anghinolfi,
M. Anguita,
M. Ardid,
S. Ardid,
J. Aublin,
C. Bagatelas,
L. Bailly-Salins,
B. Baret,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman,
F. Benfenati,
E. Berbee,
V. Bertin,
S. Biagi,
M. Boettcher,
M. Bou Cabo
, et al. (230 additional authors not shown)
Abstract:
In the era of precision measurements of the neutrino oscillation parameters, upcoming neutrino experiments will also be sensitive to physics beyond the Standard Model. KM3NeT/ORCA is a neutrino detector optimised for measuring atmospheric neutrinos from a few GeV to around 100 GeV. In this paper, the sensitivity of the KM3NeT/ORCA detector to neutrino decay has been explored. A three-flavour neutr…
▽ More
In the era of precision measurements of the neutrino oscillation parameters, upcoming neutrino experiments will also be sensitive to physics beyond the Standard Model. KM3NeT/ORCA is a neutrino detector optimised for measuring atmospheric neutrinos from a few GeV to around 100 GeV. In this paper, the sensitivity of the KM3NeT/ORCA detector to neutrino decay has been explored. A three-flavour neutrino oscillation scenario, where the third neutrino mass state $ν_3$ decays into an invisible state, e.g. a sterile neutrino, is considered. We find that KM3NeT/ORCA would be sensitive to invisible neutrino decays with $1/α_3=τ_3/m_3 < 180$~$\mathrm{ps/eV}$ at $90\%$ confidence level, assuming true normal ordering. Finally, the impact of neutrino decay on the precision of KM3NeT/ORCA measurements for $θ_{23}$, $Δm^2_{31}$ and mass ordering have been studied. No significant effect of neutrino decay on the sensitivity to these measurements has been found.
△ Less
Submitted 27 March, 2023; v1 submitted 6 February, 2023;
originally announced February 2023.
-
Using Explainability to Inform Statistical Downscaling Based on Deep Learning Beyond Standard Validation Approaches
Authors:
Jose González-Abad,
Jorge Baño-Medina,
José Manuel Gutiérrez
Abstract:
Deep learning (DL) has emerged as a promising tool to downscale climate projections at regional-to-local scales from large-scale atmospheric fields following the perfect-prognosis (PP) approach. Given their complexity, it is crucial to properly evaluate these methods, especially when applied to changing climatic conditions where the ability to extrapolate/generalise is key. In this work, we interc…
▽ More
Deep learning (DL) has emerged as a promising tool to downscale climate projections at regional-to-local scales from large-scale atmospheric fields following the perfect-prognosis (PP) approach. Given their complexity, it is crucial to properly evaluate these methods, especially when applied to changing climatic conditions where the ability to extrapolate/generalise is key. In this work, we intercompare several DL models extracted from the literature for the same challenging use-case (downscaling temperature in the CORDEX North America domain) and expand standard evaluation methods building on eXplainable artifical intelligence (XAI) techniques. We show how these techniques can be used to unravel the internal behaviour of these models, providing new evaluation dimensions and aiding in their diagnostic and design. These results show the usefulness of incorporating XAI techniques into statistical downscaling evaluation frameworks, especially when working with large regions and/or under climate change conditions.
△ Less
Submitted 3 February, 2023;
originally announced February 2023.
-
Non-thermal radiation from dual jet interactions in supermassive black hole binaries
Authors:
E. M. Gutiérrez,
L. Combi,
G. E. Romero,
M. Campanelli
Abstract:
Supermassive black hole binaries (SMBHBs) are natural by-products of galaxy mergers and are expected to be powerful multi-messenger sources. They can be powered by the accretion of matter and then radiate across the electromagnetic spectrum, much like normal active galactic nuclei (AGNs). Current electromagnetic observatories have a good chance of detecting and identifying these systems in the nea…
▽ More
Supermassive black hole binaries (SMBHBs) are natural by-products of galaxy mergers and are expected to be powerful multi-messenger sources. They can be powered by the accretion of matter and then radiate across the electromagnetic spectrum, much like normal active galactic nuclei (AGNs). Current electromagnetic observatories have a good chance of detecting and identifying these systems in the near future. However, precise observational indicators are needed to distinguish individual AGNs from SMBHBs. In this paper, we propose a novel electromagnetic signature from SMBHBs: non-thermal emission produced by the interaction between the jets ejected by the black holes. We study close SMBHBs, which accrete matter from a circumbinary disc and the mini-discs formed around each hole. Each black hole ejects a magnetically dominated jet in the direction of its spin through the Blandford--Znajeck mechanism. We argue that in such a situation, the interaction between the jets can trigger strong magnetic reconnection events, where particles are accelerated and emit non-thermal radiation. Depending on whether the jets are aligned or misaligned, this radiation can have different periodicities. We model the evolution of the particles accelerated during the dual jet interaction and calculate their radiative output, obtaining spectra and providing estimates for the variability timescales. We finally discuss how this emission compares with that of normal AGNs.
△ Less
Submitted 25 June, 2024; v1 submitted 10 January, 2023;
originally announced January 2023.
-
Exploring the Universe via the Wide, Deep Near-infrared Imaging ESO Public Survey SHARKS
Authors:
Helmut Dannerbauer,
Aurelio Carnero,
Nicholas Cross,
Carlos M. Gutierrez
Abstract:
The ESO Public Survey Southern H-ATLAS Regions Ks-band Survey (SHARKS) comprises 300 square degrees of deep imaging at 2.2 microns (the Ks band) with the VISTA InfraRed CAMera (VIRCAM) at the 4-metre Visible and Infrared Survey Telescope for Astronomy (VISTA). The first data release of the survey, comprising 5% of the data, was published via the ESO database on 31 January 2022. We describe the str…
▽ More
The ESO Public Survey Southern H-ATLAS Regions Ks-band Survey (SHARKS) comprises 300 square degrees of deep imaging at 2.2 microns (the Ks band) with the VISTA InfraRed CAMera (VIRCAM) at the 4-metre Visible and Infrared Survey Telescope for Astronomy (VISTA). The first data release of the survey, comprising 5% of the data, was published via the ESO database on 31 January 2022. We describe the strategy and status of the first data release and present the data products. We discuss briefly different scientific areas being explored with the SHARKS data and conclude with an outline of planned data releases.
△ Less
Submitted 16 December, 2022;
originally announced December 2022.
-
Quantifiably Tuneable Luminescence by Ultra-Thin Metal-Organic Nanosheets via Dual-Guest Energy Transfer
Authors:
Dylan A. Sherman,
Mario Gutiérrez,
Ian Griffiths,
Samraj Mollick,
Nader Amin,
Abderrazzak Douhal,
**-Chong Tan
Abstract:
Luminescent metal-organic frameworks (LMOFs) are promising materials for organic light-emitting diode (OLED) alternatives to silicate-based LEDs due to their tuneable structure and programmability. Yet, the 3D nature of LMOFs creates challenges for stability, optical transparency, and device integration. Metal-organic nanosheets (MONs) potentially overcome these limitations by combining the benefi…
▽ More
Luminescent metal-organic frameworks (LMOFs) are promising materials for organic light-emitting diode (OLED) alternatives to silicate-based LEDs due to their tuneable structure and programmability. Yet, the 3D nature of LMOFs creates challenges for stability, optical transparency, and device integration. Metal-organic nanosheets (MONs) potentially overcome these limitations by combining the benefits of MOFs with an atomically thin morphology of large planar dimensions. Here, we report the bottom-up synthesis of atomically thin ZIF-7-III MONs via facile low-energy salt-templating. Employing guest@MOF design, the fluorophores Rhodamine B and Fluorescein were intercalated into ZIF-7 nanosheets (Z7-NS) to form light emissive systems exhibiting intense and highly photostable fluorescence. Aggregation and Förster resonance energy transfer, enabled by the MON framework, were revealed as the mechanisms behind fluorescence. By varying guest concentration, these mechanisms provided predictable quantified control over emission chromaticity of a dual-guest Z7-NS material and the definition of an 'emission chromaticity fingerprint' - a unique subset of the visible spectrum which a material can emit by fluorescence.
△ Less
Submitted 22 October, 2022;
originally announced October 2022.
-
First results of the glitching pulsars monitoring program at the Argentine Institute of Radioastronomy
Authors:
Ezequiel Zubieta,
Ryan Missel,
Valentina Sosa Fiscella,
Carlos O. Lousto,
Santiago del Palacio,
Federico G. López Armengol,
Federico García,
Jorge A. Combi,
Linwei Wang,
Luciano Combi,
Guillermo Gancio,
Carolina Negrelli,
Eduardo M. Gutiérrez
Abstract:
We report here on the first results of a systematic monitoring of southern glitching pulsars at the Argentine Institute of Radioastronomy that started in the year 2019. We detected a major glitch in the Vela pulsar (PSR J0835$-$4510) and two small-glitches in PSR J1048$-$5832. For each glitch, we present the measurement of glitch parameters by fitting timing residuals. We then make an individual p…
▽ More
We report here on the first results of a systematic monitoring of southern glitching pulsars at the Argentine Institute of Radioastronomy that started in the year 2019. We detected a major glitch in the Vela pulsar (PSR J0835$-$4510) and two small-glitches in PSR J1048$-$5832. For each glitch, we present the measurement of glitch parameters by fitting timing residuals. We then make an individual pulses study of Vela in observations before and after the glitch. We selected 6 days of observations around the major glitch on 2021 July 22 and study their statistical properties with machine learning techniques. We use Variational AutoEncoder (VAE) reconstruction of the pulses to separate them clearly from the noise. We perform a study with Self-Organizing Maps (SOM) clustering techniques to search for unusual behavior of the clusters during the days around the glitch not finding notable qualitative changes. We have also detected and confirm recent glitches in PSR J0742$-$2822 and PSR J1740$-$3015.
△ Less
Submitted 7 March, 2023; v1 submitted 7 October, 2022;
originally announced October 2022.
-
Tracing, Ranking and Valuation of Aggregated DER Flexibility in Active Distribution Networks
Authors:
Andrey Churkin,
Wangwei Kong,
Jose N. Melchor Gutierrez,
Eduardo A. Martínez Ceseña,
Pierluigi Mancarella
Abstract:
The integration of distributed energy resources (DER) makes active distribution networks (ADNs) natural providers of flexibility services. However, the optimal operation of flexible units in ADNs is highly complex, which poses challenges for distribution system operators (DSOs) in aggregating DER flexibility. For example, to maximise the provision of services, flexible units must be strongly coord…
▽ More
The integration of distributed energy resources (DER) makes active distribution networks (ADNs) natural providers of flexibility services. However, the optimal operation of flexible units in ADNs is highly complex, which poses challenges for distribution system operators (DSOs) in aggregating DER flexibility. For example, to maximise the provision of services, flexible units must be strongly coordinated to manage network constraints, e.g., perform power swaps. Furthermore, due to the nonlinearities of aggregated DER flexibility provision, some units may need to rapidly change their outputs to enable the services. To address these challenges, this paper brings together exact AC optimal power flow (OPF) models and a cooperative game formulation and presents a new framework for tracing, ranking, and valuation of aggregated DER flexibility in ADNs. Extensive tests and simulations performed for the 33-bus radial distribution network demonstrate that the framework enables translating complex DER interactions into useful information for DSOs by ranking the criticality of flexible units and performing flexibility valuation based on its cost or economic surplus. Additionally, the framework proposes no-swap constraints and a nonlinearity metric which can be used by DSOs to identify unreliable operating regions with power swaps or rapid changes in flexible unit dispatch.
△ Less
Submitted 26 May, 2023; v1 submitted 7 October, 2022;
originally announced October 2022.
-
Application of federated learning techniques for arrhythmia classification using 12-lead ECG signals
Authors:
Daniel Mauricio Jimenez Gutierrez,
Hafiz Muuhammad Hassan,
Lorella Landi,
Andrea Vitaletti,
Ioannis Chatzigiannakis
Abstract:
Artificial Intelligence-based (AI) analysis of large, curated medical datasets is promising for providing early detection, faster diagnosis, and more effective treatment using low-power Electrocardiography (ECG) monitoring devices information. However, accessing sensitive medical data from diverse sources is highly restricted since improper use, unsafe storage, or data leakage could violate a pers…
▽ More
Artificial Intelligence-based (AI) analysis of large, curated medical datasets is promising for providing early detection, faster diagnosis, and more effective treatment using low-power Electrocardiography (ECG) monitoring devices information. However, accessing sensitive medical data from diverse sources is highly restricted since improper use, unsafe storage, or data leakage could violate a person's privacy. This work uses a Federated Learning (FL) privacy-preserving methodology to train AI models over heterogeneous sets of high-definition ECG from 12-lead sensor arrays collected from six heterogeneous sources. We evaluated the capacity of the resulting models to achieve equivalent performance compared to state-of-the-art models trained in a Centralized Learning (CL) fashion. Moreover, we assessed the performance of our solution over Independent and Identical distributed (IID) and non-IID federated data. Our methodology involves machine learning techniques based on Deep Neural Networks and Long-Short-Term Memory models. It has a robust data preprocessing pipeline with feature engineering, selection, and data balancing techniques. Our AI models demonstrated comparable performance to models trained using CL, IID, and non-IID approaches. They showcased advantages in reduced complexity and faster training time, making them well-suited for cloud-edge architectures.
△ Less
Submitted 5 January, 2024; v1 submitted 23 August, 2022;
originally announced August 2022.
-
Quadratis Puzzles
Authors:
Mario Gutiérrez,
Hugo Parlier,
Paul Turner
Abstract:
We introduce a family of reconfiguration puzzles arising from ideas in geometry and topology. We present their construction from square-tiled shapes, discuss some of the underlying mathematics and describe how they are naturally associated to puzzle spaces which can be explored through visualization.
We introduce a family of reconfiguration puzzles arising from ideas in geometry and topology. We present their construction from square-tiled shapes, discuss some of the underlying mathematics and describe how they are naturally associated to puzzle spaces which can be explored through visualization.
△ Less
Submitted 2 August, 2022;
originally announced August 2022.
-
The Need for a Meta-Architecture for Robot Autonomy
Authors:
Stalin Muñoz Gutiérrez,
Gerald Steinbauer-Wagner
Abstract:
Long-term autonomy of robotic systems implicitly requires dependable platforms that are able to naturally handle hardware and software faults, problems in behaviors, or lack of knowledge. Model-based dependable platforms additionally require the application of rigorous methodologies during the system development, including the use of correct-by-construction techniques to implement robot behaviors.…
▽ More
Long-term autonomy of robotic systems implicitly requires dependable platforms that are able to naturally handle hardware and software faults, problems in behaviors, or lack of knowledge. Model-based dependable platforms additionally require the application of rigorous methodologies during the system development, including the use of correct-by-construction techniques to implement robot behaviors. As the level of autonomy in robots increases, so do the cost of offering guarantees about the dependability of the system. Certifiable dependability of autonomous robots, we argue, can benefit from formal models of the integration of several cognitive functions, knowledge processing, reasoning, and meta-reasoning. Here we put forward the case for a generative model of cognitive architectures for autonomous robotic agents that subscribes to the principles of model-based engineering and certifiable dependability, autonomic computing, and knowledge-enabled robotics.
△ Less
Submitted 20 July, 2022;
originally announced July 2022.
-
The solar disk at high energies
Authors:
Miguel Gutiérrez,
Manuel Masip,
Sergio Muñoz
Abstract:
High energy cosmic rays "illuminate" the Sun and produce an image that could be observed in up to five different channels: a cosmic ray shadow (whose energy dependence has been studied by HAWC); a gamma ray flux (observed at $E\le 200$ GeV by Fermi-LAT); a muon shadow (detected by ANTARES and IceCube); a neutron flux (undetected, as there are no hadronic calorimeters in space); and a flux of high…
▽ More
High energy cosmic rays "illuminate" the Sun and produce an image that could be observed in up to five different channels: a cosmic ray shadow (whose energy dependence has been studied by HAWC); a gamma ray flux (observed at $E\le 200$ GeV by Fermi-LAT); a muon shadow (detected by ANTARES and IceCube); a neutron flux (undetected, as there are no hadronic calorimeters in space); and a flux of high energy neutrinos. Since these signals are correlated, the ones already observed can be used to reduce the uncertainty in the still undetected ones. Here we define a simple set up that uses the Fermi-LAT and HAWC observations to imply very definite fluxes of neutrons and neutrinos from the solar disk. In particular, we provide a fit of the neutrino flux at 10 GeV-10 TeV that includes its dependence on the zenith angle and on the period of the solar cycle. This flux represents a neutrino floor in indirect dark matter searches. We show that in some benchmark models the current bounds on the dark matter-nucleon cross section push the solar signal below this neutrino floor.
△ Less
Submitted 21 June, 2023; v1 submitted 2 June, 2022;
originally announced June 2022.
-
ClinicalPath: a Visualization tool to Improve the Evaluation of Electronic Health Records in Clinical Decision-Making
Authors:
Claudio D. G. Linhares,
Daniel M. Lima,
Jean R. Ponciano,
Mauro M. Olivatto,
Marco A. Gutierrez,
Jorge Poco,
Caetano Traina Jr.,
Agma J. M. Traina
Abstract:
Physicians work at a very tight schedule and need decision-making support tools to help on improving and doing their work in a timely and dependable manner. Examining piles of sheets with test results and using systems with little visualization support to provide diagnostics is daunting, but that is still the usual way for the physicians' daily procedure, especially in develo** countries. Electr…
▽ More
Physicians work at a very tight schedule and need decision-making support tools to help on improving and doing their work in a timely and dependable manner. Examining piles of sheets with test results and using systems with little visualization support to provide diagnostics is daunting, but that is still the usual way for the physicians' daily procedure, especially in develo** countries. Electronic Health Records systems have been designed to keep the patients' history and reduce the time spent analyzing the patient's data. However, better tools to support decision-making are still needed. In this paper, we propose ClinicalPath, a visualization tool for users to track a patient's clinical path through a series of tests and data, which can aid in treatments and diagnoses. Our proposal is focused on patient's data analysis, presenting the test results and clinical history longitudinally. Both the visualization design and the system functionality were developed in close collaboration with experts in the medical domain to ensure a right fit of the technical solutions and the real needs of the professionals. We validated the proposed visualization based on case studies and user assessments through tasks based on the physician's daily activities. Our results show that our proposed system improves the physicians' experience in decision-making tasks, made with more confidence and better usage of the physicians' time, allowing them to take other needed care for the patients.
△ Less
Submitted 26 May, 2022;
originally announced May 2022.
-
On Some Aspects of the Response to Stochastic and Deterministic Forcings
Authors:
Manuel Santos Gutiérrez,
Valerio Lucarini
Abstract:
The perturbation theory of operator semigroups is used to derive response formulas for a variety of combinations of acting forcings and reference background dynamics. In the case of background stochastic dynamics, we decompose the response formulas using the Koopman operator generator eigenfunctions and the corresponding eigenvalues, thus providing a functional basis towards identifying relaxation…
▽ More
The perturbation theory of operator semigroups is used to derive response formulas for a variety of combinations of acting forcings and reference background dynamics. In the case of background stochastic dynamics, we decompose the response formulas using the Koopman operator generator eigenfunctions and the corresponding eigenvalues, thus providing a functional basis towards identifying relaxation timescales and modes in physically relevant systems. To leading order, linear response gives the correction to expectation values due to extra deterministic forcings acting on either stochastic or chaotic dynamical systems. When considering the impact of weak noise, the response is linear in the intensity of the (extra) noise for background stochastic dynamics, while the second order response given the leading order correction when the reference dynamics is chaotic. In this latter case we clarify that previously published diverging results can be brought to common ground when a suitable interpretation - Stratonovich vs. Ito - of the noise is given. Finally, the response of two-point correlations to perturbations is studied through the resolvent formalism via a perturbative approach. Our results allow, among other things, to estimate how the correlations of a chaotic dynamical system changes as a results of adding stochastic forcing.
△ Less
Submitted 26 August, 2022; v1 submitted 18 May, 2022;
originally announced May 2022.
-
Implementation of FAIR principles in the IPCC: The WGI AR6 Atlas repository
Authors:
Maialen Iturbide,
Jesús Fernández,
José M. Gutiérrez,
Anna Pirani,
David Huard,
Alaa Al Khourdajie,
Jorge Baño-Medina,
Joaquin Bedia,
Ana Casanueva,
Ezequiel Cimadevilla,
Antonio S. Cofiño,
Matteo De Felice,
Javier Diez-Sierra,
Markel García-Díez,
James Goldie,
Dimitris A. Herrera,
Sixto Herrera,
Rodrigo Manzanas,
Josipa Milovac,
Aparna Radhakrishnan,
Daniel San-Martín,
Alessandro Spinuso,
Kristen Thyng,
Claire Trenham,
Özge Yelekçi
Abstract:
The Sixth Assessment Report (AR6) of the Intergovernmental Panel on Climate Change (IPCC) has adopted the FAIR Guiding Principles. The Atlas chapter of Working Group I (WGI) is presented as a test case. Here, we describe the application of these principles in the Atlas, the challenges faced during its implementation, and those that remain for the future. We present the open source repository resul…
▽ More
The Sixth Assessment Report (AR6) of the Intergovernmental Panel on Climate Change (IPCC) has adopted the FAIR Guiding Principles. The Atlas chapter of Working Group I (WGI) is presented as a test case. Here, we describe the application of these principles in the Atlas, the challenges faced during its implementation, and those that remain for the future. We present the open source repository resulting from this process, which collects the code (including annotated Jupyter notebooks), data provenance, and some aggregated datasets underpinning the key figures in the Atlas chapter and its interactive companion (the Interactive Atlas), open to scrutiny by the scientific community and the general public. We describe the informal pilot review conducted on this repository to gather recommendations that led to significant improvements. Finally, a working example illustrates the use of the repository to produce customized regional information, extending the Interactive Atlas products and running the code interactively in a web browser using Jupyter notebooks. Atlas repository: doi:10.5281/zenodo.5171760.
△ Less
Submitted 29 April, 2022;
originally announced April 2022.
-
A Probabilistic Chemical Programmable Computer
Authors:
Abhishek Sharma,
Marcus Tze-Kiat Ng,
Juan Manuel Parrilla Gutierrez,
Yibin Jiang,
Leroy Cronin
Abstract:
The exponential growth of the power of modern digital computers is based upon the miniaturisation of vast nanoscale arrays of electronic switches, but this will be eventually constrained by fabrication limits and power dissipation. Chemical processes have the potential to scale beyond these limits performing computations through chemical reactions, yet the lack of well-defined programmability limi…
▽ More
The exponential growth of the power of modern digital computers is based upon the miniaturisation of vast nanoscale arrays of electronic switches, but this will be eventually constrained by fabrication limits and power dissipation. Chemical processes have the potential to scale beyond these limits performing computations through chemical reactions, yet the lack of well-defined programmability limits their scalability and performance. We present a hybrid digitally programmable chemical array as a probabilistic computational machine that uses chemical oscillators partitioned in interconnected cells as a computational substrate. This hybrid architecture performs efficient computation by distributing between chemical and digital domains together with error correction. The efficiency is gained by combining digital with probabilistic chemical logic based on nearest neighbour interactions and hysteresis effects. We demonstrated the implementation of one- and two- dimensional Chemical Cellular Automata and solutions to combinatorial optimization problems.
△ Less
Submitted 28 April, 2022;
originally announced April 2022.