Showing 1–14 of 14 results for author: Gutfreund, P

Simultaneous depletion and adsorption in polymer solutions near a solid wall

Authors: Suzanne Lafon, Tiago Outerelo-Corvo, Marion Grzelka, Arnaud Hélary, Philipp Gutfreund, Liliane Léger, Alexis Chennevière, Frédéric Restagno

Abstract: Polymer solutions exhibit peculiar properties near surfaces: polymer chains either adsorb onto or can be repelled by the wall. Only a few techniques are able to probe their structure in the vicinity of solid substrates, because of the small length scales over which liquids are influenced by the wall. In this paper, we use neutron reflectivity measurements at the interface between a polystyrene sem… ▽ More Polymer solutions exhibit peculiar properties near surfaces: polymer chains either adsorb onto or can be repelled by the wall. Only a few techniques are able to probe their structure in the vicinity of solid substrates, because of the small length scales over which liquids are influenced by the wall. In this paper, we use neutron reflectivity measurements at the interface between a polystyrene semidilute solution in a good solvent and a smooth sapphire surface. We show that polymer chains are globally depleted from the solid surface, but contrary to what is generally assumed, this does not prevent some chains to still adsorb on the wall. We also observe that the Newtonian flow of the solution has a negligible effect on the size of the depletion layer, which is a hypothesis often made but rarely measured in the literature. △ Less

Submitted 10 May, 2023; originally announced May 2023.

Comments: 6 pages ; 3 figures

First Measurement of Neutron Birefringence in Polarized $^{129}$Xe and $^{131}$Xe Nuclei

Authors: H. Lu, M. J. Barlow, D. Basler, P. Gutfreund, O. Holderer, A. Ioffe, S. Pasini, P. Pistel, Z. Salhi, K. Zhernenkov, B. M. Goodson, W. M. Snow, E. Babcock

Abstract: We present the first measurements of polarized neutron birefringence in transmission through nuclear-polarized $^{129}$Xe and $^{131}$Xe gas and determine the neutron incoherent scattering lengths $b_i(^{129}Xe)=0.186\pm(0.021)_{stat.}\pm(0.004)_{syst.}\space\text{ fm}$ and $b_i(^{131}Xe)=2.09\pm(0.29)_{stat.}\pm(0.12)_{syst.}\space\text{ fm}$ for the first time. These results determine the essent… ▽ More We present the first measurements of polarized neutron birefringence in transmission through nuclear-polarized $^{129}$Xe and $^{131}$Xe gas and determine the neutron incoherent scattering lengths $b_i(^{129}Xe)=0.186\pm(0.021)_{stat.}\pm(0.004)_{syst.}\space\text{ fm}$ and $b_i(^{131}Xe)=2.09\pm(0.29)_{stat.}\pm(0.12)_{syst.}\space\text{ fm}$ for the first time. These results determine the essential parameter needed for interpretation of spin-dependent neutron-scattering studies on polarized xenon ensembles, with possible future applications ranging from tests of time-reversal violation to mode-entangled neutron scattering experiments on nuclear-polarized systems. △ Less

Submitted 1 January, 2023; originally announced January 2023.

Comments: 7 pages, 3 figures, submitted to PRL

Photo-Switchable Surfactants for Responsive Air-Water Interfaces: Azo vs. Arylazopyrazole Amphiphiles

Authors: Marco Schnurbus, Richard A. Campbell, Jörn Droste, Christian Honnigfort, Dana Glikman, Philipp Gutfreund, Michael Ryan Hansen, Björn Braunschweig

Abstract: Arylazopyrazoles (AAPs) as substitutes for azo derivatives have gained considerable attention due to their superior properties offering E/Z photo-isomerization with high yield. In order to compare and quantify their performance, azobenzene tetraethylammonium (Azo-TB) and arylazopyrazole tetraethylammonium (AAP-TB) bromides were synthesized and characterized in the bulk (water) using NMR spectrosco… ▽ More Arylazopyrazoles (AAPs) as substitutes for azo derivatives have gained considerable attention due to their superior properties offering E/Z photo-isomerization with high yield. In order to compare and quantify their performance, azobenzene tetraethylammonium (Azo-TB) and arylazopyrazole tetraethylammonium (AAP-TB) bromides were synthesized and characterized in the bulk (water) using NMR spectroscopy. At the air-water interface complementary information from vibrational sum-frequency generation (SFG) spectroscopy and neutron reflectometry (NR) has revealed the effects of E/Z isomerization in great detail. In bulk water the photostationary states of >89% for E/Z switching in both directions were very similar for the surfactants, while their interfacial behavior was substantially different. In particular, the surface excess $Γ$ of the surfactants changed drastically between E/Z isomers for AAP-TB (maximum change of $Γ$: 2.15 $μ$mol/m$^2$); for Azo-TB the change was only moderate (maximum change of $Γ$: 1.02 $μ$mol/m$^2$). Analysis of SFG spectra revealed that strong non-resonant contributions that heterodyned the resonant vibrational bands were proportional to $Γ$, enabling the aromatic C-H band to be interpreted as an indicator for changes in interfacial molecular order. Close comparison of $Γ$ from NR with the SFG amplitude from the aromatic C-H stretch as a function of concentrations and E/Z conformation revealed substantial molecular order changes for AAP-TB. In contrast, only $Γ$ and not the molecular order varied for Azo-TB. These differences in interfacial properties are attributed to the molecular structure of the AAP center that enables favorable lateral interactions at the air-water interface, causing closed-packed interfacial layers and substantial changes during E/Z photo-isomerization. △ Less

Submitted 16 July, 2020; originally announced July 2020.

Comments: Pre-edited final version, 36 manuscript pages, 2 tables, 6 figures. Supporting Information available up request to the corresponding author

The viscoelastic signature underpinning polymer deformation under shear flow

Authors: Airidas Korolkovas, Sylvain Prévost, Maciej Kawecki, Anton Devishvili, Franz A. Adlmann, Philipp Gutfreund, Max Wolff

Abstract: Entangled polymers are deformed by a strong shear flow. The shape of the polymer, called the form factor, is measured by small angle neutron scattering. However, the real-space molecular structure is not directly available from the reciprocal-space data, due to the phase problem. Instead, the data has to be fitted with a theoretical model of the molecule. We approximate the unknown structure using… ▽ More Entangled polymers are deformed by a strong shear flow. The shape of the polymer, called the form factor, is measured by small angle neutron scattering. However, the real-space molecular structure is not directly available from the reciprocal-space data, due to the phase problem. Instead, the data has to be fitted with a theoretical model of the molecule. We approximate the unknown structure using piecewise straight segments, from which we derive an analytical form factor. We fit it to our data on a semi-dilute entangled polystyrene solution under in situ shear flow. The character of the deformation is shown to lie between that of a single ideal chain (viscous) and a cross-linked network (elastic rubber). Furthermore, we use the fitted structure to estimate the mechanical stress, and find a fairly good agreement with rheology literature. △ Less

Submitted 6 December, 2018; v1 submitted 22 May, 2018; originally announced May 2018.

Journal ref: Soft Matter, 2019

Shear deformation of low-density polymer brushes in a good solvent

Authors: Airidas Korolkovas, Philipp Gutfreund, Alexis Chennevière, John F. Ankner, Franz A. Adlmann, Max Wolff, Jean-Louis Barrat

Abstract: Self-consistent field approach is used to model a single end-tethered polymer chain on a substrate subject to various forces in three dimensions. Starting from a continuous Gaussian chain model, the following perturbations are considered: (i) hydrodynamic interaction with an externally imposed shear flow for which a new theoretical framework is formulated; (ii) excluded volume effect in a good sol… ▽ More Self-consistent field approach is used to model a single end-tethered polymer chain on a substrate subject to various forces in three dimensions. Starting from a continuous Gaussian chain model, the following perturbations are considered: (i) hydrodynamic interaction with an externally imposed shear flow for which a new theoretical framework is formulated; (ii) excluded volume effect in a good solvent, treated in a mean field approximation; (iii) monomer-substrate repulsion. While the chain stretches along the flow, the change of the density profile perpendicular to the substrate is negligible for any reasonable simulation parameters. This null effect is in agreement with multiple neutron scattering studies. △ Less

Submitted 22 September, 2018; v1 submitted 22 May, 2018; originally announced May 2018.

Journal ref: Phys. Rev. E 98, 032501 (2018)

Towards generalized data reduction on a chopper-based time-of-flight neutron reflectometer

Authors: Philipp Gutfreund, Thomas Saerbeck, Miguel A. Gonzalez, Eric Pellegrini, Mark Laver, Charles Dewhurst, Robert Cubitt

Abstract: The calculation of neutron reflectivity from raw time-of-flight data including instrumental corrections as well as improved resolution calculation is presented. The theoretical calculations are compared to experimental data measured on the vertical sample plane reflectometer D17 and the horizontal sample plane reflectometer FIGARO at the Institut Laue-Langevin, Grenoble, France (ILL). This article… ▽ More The calculation of neutron reflectivity from raw time-of-flight data including instrumental corrections as well as improved resolution calculation is presented. The theoretical calculations are compared to experimental data measured on the vertical sample plane reflectometer D17 and the horizontal sample plane reflectometer FIGARO at the Institut Laue-Langevin, Grenoble, France (ILL). This article comprises the mathematical body of the time-of-flight reflectivity data reduction software COSMOS which is used on D17 and FIGARO. △ Less

Submitted 5 February, 2018; v1 submitted 11 October, 2017; originally announced October 2017.

Dynamical structure of entangled polymers simulated under shear flow

Authors: Airidas Korolkovas, Philipp Gutfreund, Max Wolff

Abstract: The non-linear response of entangled polymers to shear flow is complicated. Its current understanding is framed mainly as a rheological description in terms of the complex viscosity. However, the full picture requires an assessment of the dynamical structure of individual polymer chains which give rise to the macroscopic observables. Here we shed new light on this problem, using a computer simulat… ▽ More The non-linear response of entangled polymers to shear flow is complicated. Its current understanding is framed mainly as a rheological description in terms of the complex viscosity. However, the full picture requires an assessment of the dynamical structure of individual polymer chains which give rise to the macroscopic observables. Here we shed new light on this problem, using a computer simulation based on a blob model, extended to describe shear flow in polymer melts and semi-dilute solutions. We examine the diffusion and the intermediate scattering spectra during a steady shear flow. The relaxation dynamics are found to speed up along the flow direction, but slow down along the shear gradient direction. The third axis, vorticity, shows a slowdown at the short scale of a tube, but reaches a net speedup at the large scale of the chain radius of gyration. △ Less

Submitted 20 August, 2018; v1 submitted 31 March, 2017; originally announced March 2017.

Journal ref: The Journal of Chemical Physics 149, 074901 (2018)

Polymer brush collapse under shear flow

Authors: Airidas Korolkovas, Cesar Rodriguez-Emmenegger, Andres de los Santos Pereira, Alexis Chennevière, Frédéric Restagno, Maximilian Wolff, Franz A. Adlmann, Andrew J. C. Dennison, Philipp Gutfreund

Abstract: Shear responsive surfaces offer potential advances in a number of applications. Surface functionalisation using polymer brushes is one route to such properties, particularly in the case of entangled polymers. We report on neutron reflectometry measurements of polymer brushes in entangled polymer solutions performed under controlled shear, as well as coarse-grained computer simulations correspondin… ▽ More Shear responsive surfaces offer potential advances in a number of applications. Surface functionalisation using polymer brushes is one route to such properties, particularly in the case of entangled polymers. We report on neutron reflectometry measurements of polymer brushes in entangled polymer solutions performed under controlled shear, as well as coarse-grained computer simulations corresponding to these interfaces. Here we show a reversible and reproducible collapse of the brushes, increasing with the shear rate. Using two brushes of greatly different chain lengths and grafting densities, we demonstrate that the dynamics responsible for the structural change of the brush are governed by the free chains in solution rather than the brush itself, within the range of parameters examined. The phenomenon of the brush collapse could find applications in the tailoring of nanosensors, and as a way to dynamically control surface friction and adhesion. △ Less

Submitted 7 February, 2017; originally announced February 2017.

Journal ref: Macromolecules (2017)

Simulation of Entangled Polymer Solutions

Authors: Airidas Korolkovas, Philipp Gutfreund, Jean-Louis Barrat

Abstract: We present a computer simulation of entangled polymer solutions at equilibrium. The chains repel each other via a soft Gaussian potential, appropriate for semi-dilute solutions at the scale of a correlation blob. The key innovation to suppress chain crossings is to use a pseudo-continuous model of a backbone which effectively leaves no gaps between consecutive points on the chain, unlike the usual… ▽ More We present a computer simulation of entangled polymer solutions at equilibrium. The chains repel each other via a soft Gaussian potential, appropriate for semi-dilute solutions at the scale of a correlation blob. The key innovation to suppress chain crossings is to use a pseudo-continuous model of a backbone which effectively leaves no gaps between consecutive points on the chain, unlike the usual bead-and-spring model. Our algorithm is sufficiently fast to observe the entangled regime using a standard desktop computer. The simulated structural and mechanical correlations are in fair agreement with the expected predictions for a semi-dilute solution of entangled chains. △ Less

Submitted 7 January, 2017; originally announced January 2017.

Journal ref: The Journal of Chemical Physics 145.12 (2016): 124113

Neutron reflectometry on highly absorbing films and its application to 10B4C-based neutron detectors

Authors: F. Piscitelli, A. Khaplanov, A. Devishvili, S. Schmidt, C. Höglund, J. Birch, A. J. C. Dennison, P. Gutfreund, R. Hall-Wilton, P. Van Esch

Abstract: Neutron reflectometry is a powerful tool used for studies of surfaces and interfaces. In general the absorption in the typical studied materials can be neglected and this technique is limited to the measurement of the reflectivity only. In the case of strongly absorbing nuclei the number of neutrons is not conserved and the absorption can be directly measured by using the neutron-induced fluoresce… ▽ More Neutron reflectometry is a powerful tool used for studies of surfaces and interfaces. In general the absorption in the typical studied materials can be neglected and this technique is limited to the measurement of the reflectivity only. In the case of strongly absorbing nuclei the number of neutrons is not conserved and the absorption can be directly measured by using the neutron-induced fluorescence technique which exploits the prompt particle emission of absorbing isotopes. This technique is emerging from soft matter and biology where highly absorbing nuclei, generally in very small quantities, are used as a label for buried layers. Nowadays the importance of highly absorbing layers is rapidly increasing, partially because of their application in neutron detection; a field that has become more and more active also due to the 3He-shortage. In this manuscript we extend the neutron-induced fluorescence technique to the study of thick layers of highly absorbing materials; in particular 10B4C. The theory of neutron reflectometry is a commonly studied topic, however the subtle relationship between the reflection and the absorption of neutrons is not widely known, in particular when a strong absorption is present. The theory for a general stack of absorbing layers has been developed and compared to measurements. This new technique has potential as a tool for characterization of highly absorbing layers. We also report on the requirements that a 10B4C layer must fulfill in order to be employed as a converter in neutron detection. △ Less

Submitted 5 October, 2015; originally announced October 2015.

Comments: 13 pages, 6 figures

Journal ref: Proc. R. Soc. A 472: 20150711 (2016)

Combined neutron reflectometry and rheology

Authors: Max Wolff, Peter Kuhns, Georg Liesche, John F. Ankner, Jim F. Browning, Philipp Gutfreund

Abstract: We have combined neutron reflectometry with rheology in order to investigate the solid boundary of liquids and polymers under shear deformation. Our approach allows one to apply a controlled stress to a material while resolving the structural arrangements on the sub nanometer length scale with neutron reflectivity, off-specular and small angle scattering at the same time. The specularly reflected… ▽ More We have combined neutron reflectometry with rheology in order to investigate the solid boundary of liquids and polymers under shear deformation. Our approach allows one to apply a controlled stress to a material while resolving the structural arrangements on the sub nanometer length scale with neutron reflectivity, off-specular and small angle scattering at the same time. The specularly reflected neutron intensity of a 20 % by weight solution of the Pluronic F127 in deuterated water is evaluated. We find pronounced changes in the near interface structure under applied deformation for surfaces with different surface energies, which are correlated with changes in the storage and loss modulus. △ Less

Submitted 7 September, 2013; v1 submitted 18 April, 2013; originally announced April 2013.

Journal ref: J. Appl. Cryst. (2013) 46, 1729-1733

The search for Nanobubbles by using specular and off-specular Neutron Reflectometry

Authors: Philipp Gutfreund, Marco Maccarini, Andrew Dennison, Max Wolff

Abstract: We apply specular and off-specular neutron reflection at the hydrophobic silicon/water interface to check for evidence of nanoscopic air bubbles whose presence is claimed after an ad hoc procedure of solvent exchange. Nanobubbles and/or a depletion layer at the hydrophobic/water interface have long been discussed and generated a plethora of controversial scientific results. By combining neutron re… ▽ More We apply specular and off-specular neutron reflection at the hydrophobic silicon/water interface to check for evidence of nanoscopic air bubbles whose presence is claimed after an ad hoc procedure of solvent exchange. Nanobubbles and/or a depletion layer at the hydrophobic/water interface have long been discussed and generated a plethora of controversial scientific results. By combining neutron reflectometry (NR), off-specular reflectometry (OSS) and grazing incidence small angle neutron scattering (GISANS), we studied the interface between hydrophobized silicon and heavy water before and after saturation with nitrogen gas. Our specular reflectometry results can be interpreted by assuming a sub-molecular sized depletion layer and the off-specular measurements show no change with nitrogen super saturated water. This picture is consistent with the assumption that, following the solvent exchange, no additional nanobubbles are introduced at significant concentrations (if present at all). Furthermore, we discuss the results, in terms of the maximum surface coverage of nanobubbles that could be present on the hydrophobic surface compatibly with the sensitivity limit of these techniques. △ Less

Submitted 12 October, 2017; v1 submitted 17 April, 2013; originally announced April 2013.

Depth resolved grazing incidence scattering from the solid-liquid interface

Authors: Max Wolff, Peter Kuhns, Andrew J C Dennison, Georg Liesche, Philipp Gutfreund, Sarah Rogers

Abstract: We have applied small angle scattering in grazing incidence beam geometry on a time-of-flight neutron instrument. Due to the broad wavelength distribution provided for a specific incident beam angle the penetration depth of the neutron beam is varied over a broad range in a single measurement. The near surface structure of polymer micelles close to silicon substrates with distinct surface energy i… ▽ More We have applied small angle scattering in grazing incidence beam geometry on a time-of-flight neutron instrument. Due to the broad wavelength distribution provided for a specific incident beam angle the penetration depth of the neutron beam is varied over a broad range in a single measurement. The near surface structure of polymer micelles close to silicon substrates with distinct surface energy is resolved. It is observed that the very near-surface structure strongly depends on the surface coating whereas further away from the surface bulk like ordering is found. A more pronounced ordering is found close to surfaces with high surface energy. △ Less

Submitted 7 September, 2013; v1 submitted 14 April, 2013; originally announced April 2013.

Journal ref: J. Appl. Cryst. (2014) 47, 130-135

Solid Surface Structure Affects Liquid Order at the Polystyrene/SAM Interface

Authors: Philipp Gutfreund, Oliver Bäumchen, Dorothee van der Grinten, Renate Fetzer, Marco Maccarini, Karin Jacobs, Hartmut Zabel, Max Wolff

Abstract: We present a combined x-ray and neutron reflectivity study characterizing the interface between polystyrene (PS) and silanized surfaces. Motivated by the large difference in slip velocity of PS on top of dodecyl-trichlorosilane (DTS) and octadecyl-trichlorosilane (OTS) found in previous studies, these two systems were chosen for the present investigation. The results reveal the molecular conformat… ▽ More We present a combined x-ray and neutron reflectivity study characterizing the interface between polystyrene (PS) and silanized surfaces. Motivated by the large difference in slip velocity of PS on top of dodecyl-trichlorosilane (DTS) and octadecyl-trichlorosilane (OTS) found in previous studies, these two systems were chosen for the present investigation. The results reveal the molecular conformation of PS on silanized silicon. Differences in the molecular tilt of OTS and DTS are replicated by the adjacent phenyl rings of the PS. We discuss our findings in terms of a potential link between the microscopic interfacial structure and dynamic properties of polymeric liquids at interfaces. △ Less

Submitted 13 December, 2012; v1 submitted 5 April, 2011; originally announced April 2011.

Journal ref: Phys. Rev. E 87, 012306 (2013)