Showing 1–7 of 7 results for author: Gurugubelli, P S

Two-Dimensional Numerical Analysis on Vortex-Induced Vibrations of an Elastically Mounted Circular Cylinder Placed Very Close to a Wall

Authors: V Brahmini Priya P, Aditya Karthik, Vedanth N K, Supradeepan K, P S Gurugubelli

Abstract: Two-dimensional numerical simulations have been performed to understand the effect of wall proximity on the vortex-induced vibrations (VIV) of an elastically mounted circular cylinder having two degrees of freedom for gap ratios g/D = {0.1,0.2,0.3,0.4,0.5,0.6}, where D is the cylinder diameter, and g is the gap between the cylinder's bottom surface and the wall. Parametric simulations have been pe… ▽ More Two-dimensional numerical simulations have been performed to understand the effect of wall proximity on the vortex-induced vibrations (VIV) of an elastically mounted circular cylinder having two degrees of freedom for gap ratios g/D = {0.1,0.2,0.3,0.4,0.5,0.6}, where D is the cylinder diameter, and g is the gap between the cylinder's bottom surface and the wall. Parametric simulations have been performed using a quasi-monolithic coupled fluid-structure interaction solver with exact interface tracking for Re = 100 and m*=10 over a range of U* to present the effect of the wall's proximity on the vibration response, vortex structures, force dynamics, pressure distribution, the phase between the hydrodynamic forces and displacements, and finally different VIV branching response regimes. The numerical simulations reveal that as the gap ratio reduces, the maximum transverse vibration amplitude reduces, and the lock-in region widens. Periodic vortex shedding with a single "S" vortex street has been observed for all gap ratios g/D = 0.1 to 0.6. It has also been observed that the wall proximity affects the mean lift coefficient not only in the lock-in region but also in the pre and post lock-in regions. In the lock-in region, the response dynamics of the vibrating cylinder can be characterized into two branches, with the transition between the branches marked by a sudden jump in the phase angle $Φ$ between the lift and transverse displacement from 0 to a value slightly greater than $π$. As the gap ratio reduces, the widening of the lock-in region is accompanied by the widening of the IInd response branch and a narrowing down of the Ist response branch. For the gap ratio of g/D = 0.1, the Ist branch vanishes entirely. This work is directly relevant to the design, maintenance, and fatigue life estimation of underwater pipelines/cables laid on the seabed. △ Less

Submitted 3 December, 2022; originally announced December 2022.

Effect of combined heaving and pitching on propulsion of single and tandem flap** foils

Authors: Amit S. Hegde, Pardha S. Gurugubelli, Vaibhav Joshi

Abstract: In this study, we present two and three-dimensional numerical investigation to understand the combined effects of the non-dimensional heave amplitude varying from 0 to 1 and the pitch amplitude ranging from 0 to 30 on the propulsive performance for a single and tandem foil system at Reynolds number 1100 and reduced frequency 0.2. We initially present a systematic analysis on the thrust generation… ▽ More In this study, we present two and three-dimensional numerical investigation to understand the combined effects of the non-dimensional heave amplitude varying from 0 to 1 and the pitch amplitude ranging from 0 to 30 on the propulsive performance for a single and tandem foil system at Reynolds number 1100 and reduced frequency 0.2. We initially present a systematic analysis on the thrust generation due to the kinematic parameters for a single foil. The significance of effective angle of attack and the projected area of the foil has been emphasized in explaining the dynamics of lift and drag forces and their relationship with the propulsion. We next investigate the relation between the streamwise gap and kinematic parameters on propulsion for the tandem foil system. We show that the propulsive performance strongly depends on the upstream wake interacting with the downstream foil, and the timing of the interaction due to the gap between the foils. Through a control volume analysis, the time-averaged pressure and streamwise velocity have been investigated to explain the effect of kinematic parameters on the hydrodynamic forces. Typically in the literature, the formation of jet in the wake has been attributed to thrust generation. However, in this study, we emphasize and show the significance of the time-averaged pressure in the wake apart from the streamwise velocity (jet) for predicting the thrust forces. The study is concluded with a three-dimensional demonstration of the tandem foils to understand the possible three-dimensional effects due to the large amplitude flap** and wake-foil interaction. △ Less

Submitted 26 May, 2022; v1 submitted 14 February, 2022; originally announced February 2022.

Comments: 41 pages, 44 figures

A 3D Numerical Investigation into the Effect of Rounded Corner Radii on the Wind Loading of a Square Cylinder Subjected to Supercritical Flow

Authors: Nivedan Vishwanath, Aditya Karthik Saravanakumar, Kush Dwivedi, K. Ram Chandra Murthy, P. S. Gurugubelli, G. R. Sabareesh

Abstract: Tall buildings are often subjected to steady and unsteady forces due to external wind flows. Measurement and mitigation of these forces becomes critical to structural design in engineering applications. Over the last few decades, many approaches such as modification of the external geometry of structures have been investigated to mitigate wind-induced load. One such proven geometric modification i… ▽ More Tall buildings are often subjected to steady and unsteady forces due to external wind flows. Measurement and mitigation of these forces becomes critical to structural design in engineering applications. Over the last few decades, many approaches such as modification of the external geometry of structures have been investigated to mitigate wind-induced load. One such proven geometric modification involved rounding of sharp corners. In this work, we systematically analyze the effects of rounded corner radii on the flow-induced loading for a square cylinder. We perform 3-Dimensional (3D) simulations at a high Reynolds number of $Re = 1\times 10^5$ which is more likely to be encountered in practical applications. An Improved Delayed Detached Eddy Simulation (IDDES) formulation is used with the $k-ω$ Shear Stress Transport (SST) model for near-wall modelling. IDDES is capable of capturing flow accurately at high Reynolds numbers and prevents grid induced separation near the boundary layer. The effects of these corner modifications are analyzed in terms of the resulting mean and fluctuating components of the lift and drag forces compared to a sharp corner case. Plots of the angular distribution of the mean and fluctuating pressure coefficient along the square cylinder's surface illustrate the effects of corner modifications on the different parts of the cylinder. The windward corner's separation angle was observed to decrease with an increase in radius, resulting in a narrower and longer recirculation region. Furthermore, with an increase in radius, a reduction in the fluctuating lift, mean drag, and fluctuating drag coefficients has been observed. △ Less

Submitted 2 August, 2022; v1 submitted 30 November, 2021; originally announced December 2021.

Non-dimensional parameters for the flap** dynamics of multilayered plates

Authors: Esha Jain, Aditya Karthik Saravanakumar, V. Joshi, P. S. Gurugubelli

Abstract: The coupled flow-induced flap** dynamics of flexible plates in uniform axial flows are governed by three non-dimensional numbers, namely: Reynolds number $(Re)$, mass-ratio $(m^*)$, and non-dimensional flexural rigidity $(K_B)$. The traditional definition of these parameters is limited to isotropic single-layered flexible plates. However, there is a need to define these parameters for a more gen… ▽ More The coupled flow-induced flap** dynamics of flexible plates in uniform axial flows are governed by three non-dimensional numbers, namely: Reynolds number $(Re)$, mass-ratio $(m^*)$, and non-dimensional flexural rigidity $(K_B)$. The traditional definition of these parameters is limited to isotropic single-layered flexible plates. However, there is a need to define these parameters for a more generic plate of multiple isotropic layers placed on top of each other. In this work, we derive the non-dimensional parameters for a flexible plate of $n$-isotropic layers and validate the non-dimensional parameters with numerical simulations. The proposed non-dimensional framework connects the experimental, numerical, and analytical studies on single-layered plates with the flap** dynamics of multilayered plates. △ Less

Submitted 9 May, 2023; v1 submitted 13 April, 2021; originally announced April 2021.

Numerical Study on Flap** Dynamics of a Flexible Two-Layered Plate in a Uniform Flow

Authors: Aditya Karthik S., Supradeepan K., P. S. Gurugubelli

Abstract: Over the past few decades, the prospect of energy generation from an oscillating piezoelectric patch has gained attention. A typical setup of this kind would be a piezoelectric patch mounted on a flexible plate that is exhibiting self-sustained flap** motion. Piezoelectric patches are generally multilayered consisting of piezoelectric, substrate and electrode layers placed on top of each other.… ▽ More Over the past few decades, the prospect of energy generation from an oscillating piezoelectric patch has gained attention. A typical setup of this kind would be a piezoelectric patch mounted on a flexible plate that is exhibiting self-sustained flap** motion. Piezoelectric patches are generally multilayered consisting of piezoelectric, substrate and electrode layers placed on top of each other. In this paper, we first propose a quasi-monolithic formulation with exact interface tracking to simulate the fluid-multilayered structure interactions. We validate the proposed formulation, using an in-house solver, by considering a simple two-layered plate-like structure with identical material properties against a single-layered plate. We then use this formulation to study a two-layered flexible plate, wherein each layer of the plate has independent material properties. Systematic parametric simulations are conducted to understand the effect of difference in material properties between the two layers of a plate on the self-sustained flap** dynamics. The parametric simulations are performed at a Reynolds number Re=1000 by selecting different values of Young's modulus and density for each of the layers such that the average structure to fluid mass ratio (m)avg=0.1 and average non-dimensional bending stiffness (KB)avg=0.0005. Firstly, the effects of difference in elasticity between the two layers on the flap** amplitude, frequency, forces and vortex shedding patterns are investigated. Following this, the effect of such difference in elastic properties on the onset of flap** is investigated for a case with Re=1000, (m)avg=0.1 and (KB)avg=0.0008 and two distinct response regimes are observed: (a) fixed-point stable and (b) periodic LCO. Finally, we look into the effects due to the difference in the structural density between the two layers on the flap** dynamics of the plate. △ Less

Submitted 8 October, 2020; originally announced October 2020.

A Variational Projection Scheme for Nonmatching Surface-to-Line Coupling between 3D Flexible Multibody System and Incompressible Turbulent Flow

Authors: P S Gurugubelli, R Ghoshal, V Joshi, R K Jaiman

Abstract: This paper is concerned with the partitioned iterative formulation to simulate the fluid-structure interaction of a nonlinear multibody system in an incompressible turbulent flow. The proposed formulation relies on a three-dimensional (3D) incompressible turbulent flow solver, a nonlinear monolithic elastic structural solver for constrained flexible multibody system and the nonlinear iterative for… ▽ More This paper is concerned with the partitioned iterative formulation to simulate the fluid-structure interaction of a nonlinear multibody system in an incompressible turbulent flow. The proposed formulation relies on a three-dimensional (3D) incompressible turbulent flow solver, a nonlinear monolithic elastic structural solver for constrained flexible multibody system and the nonlinear iterative force correction scheme for coupling of the turbulent fluid-flexible multibody system with nonmatching interface meshes. While the fluid equations are discretized using a stabilized Petrov-Galerkin formulation in space and the generalized-$α$ updates in time, the multibody system utilizes a discontinuous space-time Galerkin finite element method. We address two key challenges in the present formulation. Firstly, the coupling of the incompressible turbulent flow with a system of nonlinear elastic bodies described in a co-rotated frame. Secondly, the projection of the tractions and displacements across the nonmatching 3D fluid surface elements and the one-dimensional line elements for the flexible multibody system in a conservative manner. Through the nonlinear iterative correction and the conservative projection, the developed fluid-flexible multibody interaction solver is stable for problems involving strong inertial effects between the fluid-flexible multibody system and the coupled interactions among each multibody component. The accuracy of the proposed coupled finite element framework is validated against the available experimental data for a long flexible cylinder undergoing vortex-induced vibration in a uniform current flow condition. Finally, a practical application of the proposed framework is demonstrated by simulating the flow-induced vibration of a realistic offshore floating platform connected to a long riser and an elastic mooring system. △ Less

Submitted 5 November, 2017; originally announced November 2017.

On the Mechanism of Large Amplitude Flap** of Inverted Foil in a Uniform Flow

Authors: P. S. Gurugubelli, R. K. Jaiman

Abstract: An elastic foil interacting with a uniform flow with its trailing edge clamped, also known as the inverted foil, exhibits a wide range of complex self-induced flap** regimes such as large amplitude flap** (LAF), deformed and flipped flap**. Here, we perform three-dimensional numerical experiments to examine the role of vortex shedding and the vortex-vortex interaction on the LAF response at… ▽ More An elastic foil interacting with a uniform flow with its trailing edge clamped, also known as the inverted foil, exhibits a wide range of complex self-induced flap** regimes such as large amplitude flap** (LAF), deformed and flipped flap**. Here, we perform three-dimensional numerical experiments to examine the role of vortex shedding and the vortex-vortex interaction on the LAF response at Reynolds number Re=30,000. Here we investigate the dynamics of the inverted foil for a novel configuration wherein we introduce a fixed splitter plate at the trailing edge to suppress the vortex shedding from trailing edge and inhibit the interaction between the counter-rotating vortices. We find that the inhibition of the interaction has an insignificant effect on the transverse flap** amplitudes, due to a relatively weaker coupling between the counter-rotating vortices emanating from the leading edge and trailing edge. However, the inhibition of the trailing edge vortex reduces the streamwise flap** amplitude, the flap** frequency and the net strain energy of foil. To further generalize our understanding of the LAF, we next perform low-Reynolds number (Re$\in[0.1,50]$) simulations for the identical foil properties to realize the impact of vortex shedding on the large amplitude flap**. Due to the absence of vortex shedding process in the low-$Re$ regime, the inverted foil no longer exhibits the periodic flap**. However, the flexible foil still loses its stability through divergence instability to undergo a large static deformation. Finally, we introduce an analogous analytical model for the LAF based on the dynamics of an elastically mounted flat plate undergoing flow-induced pitching oscillations in a uniform stream. △ Less

Submitted 3 November, 2017; originally announced November 2017.