-
Sub-1ms Instinctual Interference Adaptive GaN LNA Front-End with Power and Linearity Tuning
Authors:
Jie Yang,
Baibhab Chatterjee,
Mohammad Abu Khater,
Mattias Thorsell,
Sten E. Gunnarsson,
Tero Kiuru,
Shreyas Sen
Abstract:
One of the major challenges in communication, radar, and electronic warfare receivers arises from nearby device interference. The paper presents a 2-6 GHz GaN LNA front-end with onboard sensing, processing, and feedback utilizing microcontroller-based controls to achieve adaptation to a variety of interference scenarios through power and linearity regulations. The utilization of GaN LNA provides h…
▽ More
One of the major challenges in communication, radar, and electronic warfare receivers arises from nearby device interference. The paper presents a 2-6 GHz GaN LNA front-end with onboard sensing, processing, and feedback utilizing microcontroller-based controls to achieve adaptation to a variety of interference scenarios through power and linearity regulations. The utilization of GaN LNA provides high power handling capability (30 dBm) and high linearity (OIP3= 30 dBm) for radar and EW applications. The system permits an LNA power consumption to tune from 500 mW to 2 W (4X increase) in order to adjust the linearity from P\textsubscript{1dB,IN}=-10.5 dBm to 0.5 dBm (>10X increase). Across the tuning range, the noise figure increases by approximately 0.4 dB. Feedback control methods are presented with backgrounds from control theory. The rest of the controls consume $\leq$10$\%$ (100 mW) of nominal LNA power (1 W) to achieve an adaptation time <1 ms.
△ Less
Submitted 27 November, 2022;
originally announced November 2022.
-
LuMaMi28: Real-Time Millimeter-Wave Massive MIMO Systems with Antenna Selection
Authors:
MinKeun Chung,
Liang Liu,
Andreas Johansson,
Sara Gunnarsson,
Martin Nilsson,
Zhinong Ying,
Olof Zander,
Kamal Samanta,
Chris Clifton,
Toshiyuki Koimori,
Shinya Morita,
Satoshi Taniguchi,
Fredrik Tufvesson,
Ove Edfors
Abstract:
This paper presents LuMaMi28, a real-time 28 GHz massive multiple-input multiple-output (MIMO) testbed. In this testbed, the base station has 16 transceiver chains with a fully-digital beamforming architecture (with different pre-coding algorithms) and simultaneously supports multiple user equipments (UEs) with spatial multiplexing. The UEs are equipped with a beam-switchable antenna array for rea…
▽ More
This paper presents LuMaMi28, a real-time 28 GHz massive multiple-input multiple-output (MIMO) testbed. In this testbed, the base station has 16 transceiver chains with a fully-digital beamforming architecture (with different pre-coding algorithms) and simultaneously supports multiple user equipments (UEs) with spatial multiplexing. The UEs are equipped with a beam-switchable antenna array for real-time antenna selection where the one with the highest channel magnitude, out of four pre-defined beams, is selected. For the beam-switchable antenna array, we consider two kinds of UE antennas, with different beam-width and different peak-gain. Based on this testbed, we provide measurement results for millimeter-wave (mmWave) massive MIMO performance in different real-life scenarios with static and mobile UEs. We explore the potential benefit of the mmWave massive MIMO systems with antenna selection based on measured channel data, and discuss the performance results through real-time measurements.
△ Less
Submitted 7 September, 2021;
originally announced September 2021.
-
Sensing and Classification Using Massive MIMO: A Tensor Decomposition-Based Approach
Authors:
B. R. Manoj,
Guoda Tian,
Sara Gunnarsson,
Fredrik Tufvesson,
Erik G. Larsson
Abstract:
Wireless-based activity sensing has gained significant attention due to its wide range of applications. We investigate radio-based multi-class classification of human activities using massive multiple-input multiple-output (MIMO) channel measurements in line-of-sight and non line-of-sight scenarios. We propose a tensor decomposition-based algorithm to extract features by exploiting the complex cor…
▽ More
Wireless-based activity sensing has gained significant attention due to its wide range of applications. We investigate radio-based multi-class classification of human activities using massive multiple-input multiple-output (MIMO) channel measurements in line-of-sight and non line-of-sight scenarios. We propose a tensor decomposition-based algorithm to extract features by exploiting the complex correlation characteristics across time, frequency, and space from channel tensors formed from the measurements, followed by a neural network that learns the relationship between the input features and output target labels. Through evaluations of real measurement data, it is demonstrated that the classification accuracy using a massive MIMO array achieves significantly better results compared to the state-of-the-art even for a smaller experimental data set.
△ Less
Submitted 2 September, 2021;
originally announced September 2021.
-
Experimental Exploration of Unlicensed Sub-GHz Massive MIMO for Massive Internet-of-Things
Authors:
Gilles Callebaut,
Sara Gunnarsson,
Andrea P. Guevara,
Anders J Johansson,
Liesbet Van der Perre,
Fredrik Tufvesson
Abstract:
Due to the increase of Internet-of-Things (IoT) devices, IoT networks are getting overcrowded. Networks can be extended with more gateways, increasing the number of supported devices. However, as investigated in this work, massive MIMO has the potential to increase the number of simultaneous connections, while also lowering the energy expenditure of these devices. We present a study of the channel…
▽ More
Due to the increase of Internet-of-Things (IoT) devices, IoT networks are getting overcrowded. Networks can be extended with more gateways, increasing the number of supported devices. However, as investigated in this work, massive MIMO has the potential to increase the number of simultaneous connections, while also lowering the energy expenditure of these devices. We present a study of the channel characteristics of massive MIMO in the unlicensed sub-GHz band. The goal is to support IoT applications with strict requirements in terms of number of devices, power consumption, and reliability. The assessment is based on experimental measurements using both a uniform linear and a rectangular array. Our study demonstrates and validates the advantages of deploying massive MIMO gateways to serve IoT nodes. While the results are general, here we specifically focus on static nodes. The array gain and channel hardening effect yield opportunities to lower the transmit-power of IoT nodes while also increasing reliability. The exploration confirms that exploiting large arrays brings great opportunities to connect a massive number of IoT devices by separating the nodes in the spatial domain. In addition, we give an outlook on how static IoT nodes could be scheduled based on partial channel state information.
△ Less
Submitted 26 May, 2021;
originally announced May 2021.
-
Moving Object Classification with a Sub-6 GHz Massive MIMO Array using Real Data
Authors:
B. R. Manoj,
Guoda Tian,
Sara Gunnarsson,
Fredrik Tufvesson,
Erik G. Larsson
Abstract:
Classification between different activities in an indoor environment using wireless signals is an emerging technology for various applications, including intrusion detection, patient care, and smart home. Researchers have shown different methods to classify activities and their potential benefits by utilizing WiFi signals. In this paper, we analyze classification of moving objects by employing mac…
▽ More
Classification between different activities in an indoor environment using wireless signals is an emerging technology for various applications, including intrusion detection, patient care, and smart home. Researchers have shown different methods to classify activities and their potential benefits by utilizing WiFi signals. In this paper, we analyze classification of moving objects by employing machine learning on real data from a massive multi-input-multi-output (MIMO) system in an indoor environment. We conduct measurements for different activities in both line-of-sight and non line-of-sight scenarios with a massive MIMO testbed operating at 3.7 GHz. We propose algorithms to exploit amplitude and phase-based features classification task. For the considered setup, we benchmark the classification performance and show that we can achieve up to 98% accuracy using real massive MIMO data, even with a small number of experiments. Furthermore, we demonstrate the gain in performance results with a massive MIMO system as compared with that of a limited number of antennas such as in WiFi devices.
△ Less
Submitted 9 February, 2021;
originally announced February 2021.
-
Internet of Buoys: An Internet of Things Implementation at Sea
Authors:
Michiel Sandra,
Sara Gunnarsson,
Anders J Johansson
Abstract:
Internet of Things (IoT) applications are emerging in many different areas, including maritime environments. One of the applications in this area is the monitoring of buoys at sea. To realize wireless tracking of buoys, an accurate prediction of the path loss in an open-sea environment is essential. So far, channel measurements at sea have mainly been conducted with antennas placed a couple of met…
▽ More
Internet of Things (IoT) applications are emerging in many different areas, including maritime environments. One of the applications in this area is the monitoring of buoys at sea. To realize wireless tracking of buoys, an accurate prediction of the path loss in an open-sea environment is essential. So far, channel measurements at sea have mainly been conducted with antennas placed a couple of meters above the sea surface, which is higher than the buoys themselves. Therefore, we investigated the validity of the published channel models at sea by means of path loss measurements using a LoRa link with a transmitter antenna height of 0.35 m and a base station antenna height of 2.65 m and 5.2 m. Our results show that the round earth loss model is not accurate at these antenna heights. The ITU-R P.2001-3 model and a model by Bullington show a better agreement with our measurements. However, the difference between our two measurement campaigns shows that more investigation is needed on the dependence of the path loss on the sea state. Additionally, the availability of Sigfox, Narrowband Internet of Things (NB-IoT), and The Things Network at sea has been explored. We found that NB-IoT and Sigfox can be used for IoT applications in the tested area at low antenna heights.
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
-
Massive MIMO goes Sub-GHz: Implementation and Experimental Exploration for LPWANs
Authors:
Gilles Callebaut,
Sara Gunnarsson,
Andrea P. Guevara,
Fredrik Tufvesson,
Sofie Pollin,
Liesbet Van der Perre,
Anders J Johansson
Abstract:
Low-Power Wide-Area Networks operating in the unlicensed bands are being deployed to connect a rapidly growing number of Internet-of-Things devices. While the unlicensed sub-GHz band offers favorable propagation for long-range connections, measurements show that the energy consumption of the nodes is still mostly dominated by the wireless transmission affecting their autonomy. We investigate the p…
▽ More
Low-Power Wide-Area Networks operating in the unlicensed bands are being deployed to connect a rapidly growing number of Internet-of-Things devices. While the unlicensed sub-GHz band offers favorable propagation for long-range connections, measurements show that the energy consumption of the nodes is still mostly dominated by the wireless transmission affecting their autonomy. We investigate the potential benefits of deploying massive MIMO technology to increase system reliability and at the same time support low-energy devices with good coverage at sub-GHz frequencies. The impact of different antenna configurations and propagation conditions is analyzed. Both actual average experienced array gain and channel hardening are examined. The assessment demonstrates the effect of channel hardening as well as the potential benefits of the experienced array gain. These measurements serve as a first assessment of the channel conditions of massive MIMO at sub-GHz frequencies and are, to the best of our knowledge, the first of its kind.
△ Less
Submitted 3 December, 2020;
originally announced December 2020.
-
A Light Signalling Approach to Node Grou** for Massive MIMO IoT Networks
Authors:
Emma Fitzgerald,
Michał Pióro,
Harsh Tataria,
Gilles Callebaut,
Sara Gunnarsson,
Liesbet Van der Perre
Abstract:
Massive MIMO is a leading technology to connect very large numbers of energy constrained nodes, as it offers both extensive spatial multiplexing and large array gain. A challenge resides in partitioning the many nodes into groups that can communicate simultaneously such that the mutual interference is minimized. We here propose node partitioning strategies that do not require full channel state in…
▽ More
Massive MIMO is a leading technology to connect very large numbers of energy constrained nodes, as it offers both extensive spatial multiplexing and large array gain. A challenge resides in partitioning the many nodes into groups that can communicate simultaneously such that the mutual interference is minimized. We here propose node partitioning strategies that do not require full channel state information, but rather are based on nodes' respective directional channel properties. In our considered scenarios, these typically have a time constant that is far larger than the coherence time of the channel. We developed both an optimal and an approximation algorithm to partition users based on directional channel properties, and evaluated them numerically. Our results show that both algorithms, despite using only these directional channel properties, achieve similar performance in terms of the minimum signal-to-interference-plus-noise ratio for any user, compared with a reference method using full channel knowledge. In particular, we demonstrate that grou** nodes with related directional properties is to be avoided. We hence realise a simple partitioning method requiring minimal information to be collected from the nodes, and where this information typically remains stable over a long term, thus promoting their autonomy and energy efficiency.
△ Less
Submitted 16 June, 2022; v1 submitted 11 May, 2020;
originally announced May 2020.
-
Channel Hardening in Massive MIMO: Model Parameters and Experimental Assessment
Authors:
Sara Gunnarsson,
José Flordelis,
Liesbet Van der Perre,
Fredrik Tufvesson
Abstract:
Reliability is becoming increasingly important for many applications envisioned for future wireless systems. A technology that could improve reliability in these systems is massive MIMO (Multiple-Input Multiple-Output). One reason for this is a phenomenon called channel hardening, which means that as the number of antennas in the system increases, the variations of channel gain decrease in both th…
▽ More
Reliability is becoming increasingly important for many applications envisioned for future wireless systems. A technology that could improve reliability in these systems is massive MIMO (Multiple-Input Multiple-Output). One reason for this is a phenomenon called channel hardening, which means that as the number of antennas in the system increases, the variations of channel gain decrease in both the time- and frequency domain. Our analysis of channel hardening is based on a joint comparison of theory, measurements and simulations. Data from measurement campaigns including both indoor and outdoor scenarios, as well as cylindrical and planar base station arrays, are analyzed. The simulation analysis includes a comparison with the COST 2100 channel model with its massive MIMO extension. The conclusion is that the COST 2100 model is well suited to represent real scenarios, and provides a reasonable match to actual measurements up to the uncertainty of antenna patterns and user interaction. Also, the channel hardening effect in practical massive MIMO channels is less pronounced than in complex independent and identically distributed (i.i.d.) Gaussian channels, which are often considered in theoretical work.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Channel Hardening in Massive MIMO - A Measurement Based Analysis
Authors:
Sara Gunnarsson,
Jose Flordelis,
Liesbet Van der Perre,
Fredrik Tufvesson
Abstract:
Wireless-controlled robots, cars and other critical applications are in need of technologies that offer high reliability and low latency. Massive MIMO, Multiple-Input Multiple-Output, is a key technology for the upcoming 5G systems and is one part of the solution to increase the reliability of wireless systems. More specifically, when increasing the number of base station antennas in a massive MIM…
▽ More
Wireless-controlled robots, cars and other critical applications are in need of technologies that offer high reliability and low latency. Massive MIMO, Multiple-Input Multiple-Output, is a key technology for the upcoming 5G systems and is one part of the solution to increase the reliability of wireless systems. More specifically, when increasing the number of base station antennas in a massive MIMO systems the channel variations decrease and the so-called channel hardening effect appears. This means that the variations of the channel gain in time and frequency decrease. In this paper, channel hardening in massive MIMO systems is assessed based on analysis of measurement data. For an indoor scenario, the channels are measured with a 128-port cylindrical array for nine single-antenna users. The analysis shows that in a real scenario a channel hardening of 3.2-4.6 dB, measured as a reduction of the standard deviation of the channel gain, can be expected depending on the amount of user interaction. Also, some practical implications and insights are presented.
△ Less
Submitted 20 June, 2018; v1 submitted 5 April, 2018;
originally announced April 2018.
