-
contact.engineering -- Create, analyze and publish digital surface twins from topography measurements across many scales
Authors:
Michael C. Röttger,
Antoine Sanner,
Luke A. Thimons,
Till Junge,
Abhijeet Gujrati,
Joseph M. Monti,
Wolfram G. Nöhring,
Tevis D. B. Jacobs,
Lars Pastewka
Abstract:
The optimization of surface finish to improve performance occurs largely through trial and error, despite significant advancements in the relevant science. There are three central challenges that account for this disconnect: (1) the challenge of integration of many different types of measurement for the same surface to capture the multi-scale nature of roughness; (2) the technical complexity of im…
▽ More
The optimization of surface finish to improve performance occurs largely through trial and error, despite significant advancements in the relevant science. There are three central challenges that account for this disconnect: (1) the challenge of integration of many different types of measurement for the same surface to capture the multi-scale nature of roughness; (2) the technical complexity of implementing spectral analysis methods, and of applying mechanical or numerical models to describe surface performance; (3) a lack of consistency between researchers and industries in how surfaces are measured, quantified, and communicated. Here we present a freely-available internet-based application which attempts to overcome all three challenges. First, the application enables the user to upload many different topography measurements taken from a single surface, including using different techniques, and then integrates all of them together to create a digital surface twin. Second, the application calculates many of the commonly used topography metrics, such as root-mean-square parameters, power spectral density (PSD), and autocorrelation function (ACF), as well as implementing analytical and numerical calculations, such as boundary element modeling (BEM) for elastic and plastic deformation. Third, the application serves as a repository for users to securely store surfaces, and if they choose, to share these with collaborators or even publish them (with a digital object identifier) for all to access. The primary goal of this application is to enable researchers and manufacturers to quickly and easily apply cutting-edge tools for the characterization and properties-modeling of real-world surfaces. An additional goal is to advance the use of open-science principles in surface engineering by providing a FAIR database where researchers can choose to publish surface measurements for all to use.
△ Less
Submitted 18 September, 2022; v1 submitted 25 March, 2022;
originally announced March 2022.
-
Dependence of Adhesive Friction on Surface Roughness and Elastic Modulus
Authors:
Daniel Maksuta,
Siddhesh Dalvi,
Abhijeet Gujrati,
Lars Pastewka,
Tevis DB Jacobs,
Ali Dhinojwala
Abstract:
When adhesive elastomeric materials slide over hard rough surfaces at low velocities, there are two primary dissipative mechanisms that control how friction changes with sliding velocity: viscoelastic dissipation and adhesive dissipation. To distinguish the contribution of these dissipative mechanisms we have measured frictional shear stresses for crosslinked polydimethylsiloxane (PDMS) on three d…
▽ More
When adhesive elastomeric materials slide over hard rough surfaces at low velocities, there are two primary dissipative mechanisms that control how friction changes with sliding velocity: viscoelastic dissipation and adhesive dissipation. To distinguish the contribution of these dissipative mechanisms we have measured frictional shear stresses for crosslinked polydimethylsiloxane (PDMS) on three different rough surfaces of similar surface chemistry across nearly six decades of sliding velocity. The results show that the observed friction is dominated by adhesive dissipation, rather than viscoelastic dissipation. Prior models for elastomer friction assume that roughness only influences adhesive dissipation via the amount of contact area; by contrast, we find that the roughness-induced oscillations occurring across all length scales from macroscopic to atomic influence the molecular processes governing the adhesive dissipation. While it was previously known that roughness-induced oscillations affected the viscoelastic dissipation; this is the first demonstration that these oscillations also control the behavior of the adhesive component of friction. Finally, while theory predicts that rough friction should be independent of elastic modulus ($E'$), we show that a strong dependence on modulus, with the frictional shear stress scaling as $E'^{1/2}$. When analyzed in this way, data from four different moduli and three different roughnesses collapse onto a universal curve to describe the velocity-dependent friction of soft materials. Taken together, this investigation sheds new light on the adhesive component of friction, and how it depends on the roughness and stiffness of the materials.
△ Less
Submitted 2 October, 2021;
originally announced October 2021.
-
Hard-material Adhesion: Which Scales of Roughness Matter?
Authors:
Luke A. Thimons,
Abhijeet Gujrati,
Antoine Sanner,
Lars Pastewka,
Tevis D. B. Jacobs
Abstract:
Surface topography strongly modifies adhesion of hard-material contacts, yet roughness of real surfaces typically exists over many length scales. This investigation aims to determine which scales of topography have the strongest effect on macroscopic adhesion. Adhesion measurements were performed on technology-relevant diamond coatings of varying roughness using spherical ruby probes that are larg…
▽ More
Surface topography strongly modifies adhesion of hard-material contacts, yet roughness of real surfaces typically exists over many length scales. This investigation aims to determine which scales of topography have the strongest effect on macroscopic adhesion. Adhesion measurements were performed on technology-relevant diamond coatings of varying roughness using spherical ruby probes that are large enough ($0.5$-mm-diameter) to sample all length scales of topography. For each material, more than $2000$ measurements of pull-off force were performed in order to investigate the magnitude and statistical distribution of adhesion. Using sphere-contact models, the roughness-dependent effective values of work of adhesion were measured, ranging from $0.08$ to $7.15$ mJ/m$^2$ across the four surfaces. The data was more accurately fit using numerical analysis, where an interaction potential was integrated over the AFM-measured topography of all contacting surfaces. These calculations revealed that consideration of nanometer-scale plasticity in the materials was crucial for a good quantitative fit of the measurements, and the presence of such plasticity was confirmed with AFM measurements of the probe after testing. This analysis enabled the extraction of geometry-independent material parameters; the intrinsic work of adhesion between ruby and diamond was determined to be $46.3$ mJ/m$^2$. The range of adhesion was $5.6$ nm, which is longer than is typically assumed for atomic interactions, but is in agreement with other recent investigations. Finally, the numerical analysis was repeated for the same surfaces but this time with different length-scales of roughness included or filtered out. The results demonstrate a critical band of length-scales between $43$ nm and $1.8$ nm in lateral size that has the strongest effect on the total adhesive force for these hard, rough contacts.
△ Less
Submitted 5 August, 2021;
originally announced August 2021.
-
Comprehensive topography characterization of polycrystalline diamond coatings
Authors:
Abhijeet Gujrati,
Antoine Sanner,
Subarna R. Khanal,
Nicolaie Moldovan,
Hongjun Zeng,
Lars Pastewka,
Tevis D. B. Jacobs
Abstract:
The surface topography of diamond coatings strongly affects surface properties such as adhesion, friction, wear, and biocompatibility. However, the understanding of multi-scale topography, and its effect on properties, has been hindered by conventional measurement methods, which capture only a single length scale. Here, four different polycrystalline diamond coatings are characterized using transm…
▽ More
The surface topography of diamond coatings strongly affects surface properties such as adhesion, friction, wear, and biocompatibility. However, the understanding of multi-scale topography, and its effect on properties, has been hindered by conventional measurement methods, which capture only a single length scale. Here, four different polycrystalline diamond coatings are characterized using transmission electron microscopy to assess the roughness down to the sub-nanometer scale. Then these measurements are combined, using the power spectral density (PSD), with conventional methods (stylus profilometry and atomic force microscopy) to characterize all scales of topography. The results demonstrate the critical importance of measuring topography across all length scales, especially because their PSDs cross over one another, such that a surface that is rougher at a larger scale may be smoother at a smaller scale and vice versa. Furthermore, these measurements reveal the connection between multi-scale topography and grain size, with characteristic scaling behavior at and slightly below the mean grain size, and self-affine fractal-like roughness at other length scales. At small (subgrain) scales, unpolished surfaces exhibit a common form of residual roughness that is self-affine in nature but difficult to detect with conventional methods. This approach of capturing topography from the atomic- to the macro-scale is termed comprehensive topography characterization, and all of the topography data from these surfaces has been made available for further analysis by experimentalists and theoreticians. Scientifically, this investigation has identified four characteristic regions of topography scaling in polycrystalline diamond materials.
△ Less
Submitted 18 March, 2021;
originally announced March 2021.
-
Linking energy loss in soft adhesion to surface roughness
Authors:
Siddhesh Dalvi,
Abhijeet Gujrati,
Subarna R. Khanal,
Lars Pastewka,
Ali Dhinojwala,
Tevis D. B. Jacobs
Abstract:
A mechanistic understanding of adhesion in soft materials is critical in the fields of transportation (tires, gaskets, seals), biomaterials, micro-contact printing, and soft robotics. Measurements have long demonstrated that the apparent work of adhesion coming into contact is consistently lower than the intrinsic work of adhesion for the materials, and that there is adhesion hysteresis during sep…
▽ More
A mechanistic understanding of adhesion in soft materials is critical in the fields of transportation (tires, gaskets, seals), biomaterials, micro-contact printing, and soft robotics. Measurements have long demonstrated that the apparent work of adhesion coming into contact is consistently lower than the intrinsic work of adhesion for the materials, and that there is adhesion hysteresis during separation, commonly explained by viscoelastic dissipation. Still lacking is a quantitative experimentally validated link between adhesion and measured topography. Here, we used in situ measurements of contact size to investigate the adhesion behavior of soft elastic polydimethylsiloxane (PDMS) hemispheres (modulus ranging from 0.7 to 10 MPa) on four different polycrystalline diamond substrates with topography characterized across eight orders of magnitude, including down to the Ångström-scale. The results show that the reduction in apparent work of adhesion is equal to the energy required to achieve conformal contact. Further, the energy loss during contact and removal is equal to the product of intrinsic work of adhesion and the true contact area. These findings provide a simple mechanism to quantitatively link the widely-observed adhesion hysteresis to roughness rather than viscoelastic dissipation.
△ Less
Submitted 2 December, 2019; v1 submitted 29 July, 2019;
originally announced July 2019.