-
Impact of oxygen ordering on titanium lattice parameters
Authors:
Martin S. Talla Noutack,
Fabienne Amann,
Sophie Nowak,
Régis Poulain,
Raphaëlle Guillou,
Stéphanie Delannoy,
Ivan Guillot,
Frédéric Prima,
Emmanuel Clouet
Abstract:
Variations with oxygen concentration of titanium lattice parameters are obtained by means of ab initio calculations, considering the impact of oxygen ordering. The quasiharmonic approximation is used to take into account the thermal expansion at finite temperature. Results show that lattice parameters depend mainly on oxygen concentration and, to a lesser extent, on the ordering state. Knowing the…
▽ More
Variations with oxygen concentration of titanium lattice parameters are obtained by means of ab initio calculations, considering the impact of oxygen ordering. The quasiharmonic approximation is used to take into account the thermal expansion at finite temperature. Results show that lattice parameters depend mainly on oxygen concentration and, to a lesser extent, on the ordering state. Knowing these theoretical variations, one can get insights into the composition of ordered compounds existing in Ti-O binary alloys from their lattice mismatch measured experimentally by x-ray diffraction. The approach is used in a binary alloy containing 6000 ppm in weight of oxygen. It is concluded that the ordered compounds, which are observed after a recrystallization heat treatment, do not have the expected Ti6O stoichiometry but have a composition close to the nominal concentration. Oxygen ordering proceeds, therefore, before oxygen partitioning in titanium.
△ Less
Submitted 11 February, 2024;
originally announced February 2024.
-
Accommodation mechanisms in strain-transformable titanium alloys
Authors:
Yolaine Danarda,
Guilhem Martin,
Lola Lilensten,
Fan Sun,
Anthony Seret,
Régis Poulain,
Srinivas Mantri,
Raphaëlle Guillou,
Dominique Thiaudière,
Immanuel Freiherr von Thüngen,
Daniel Galy,
Michaël Piellard,
Nathalie Bozzolo,
Raj Banerjee,
Frédéric Prima
Abstract:
A new $β$-metastable Ti-alloy is designed with the aim to obtain a TWIP alloy but positioned at the limit between the TRIP/TWIP and the TWIP dominated regime. The designed alloy exhibits a large ductility combined with an elevated and stable work-hardening rate. Deformation occurring by formation and multiplication of {332}<113> twins is evidenced and followed by in-situ electron microscopy, and n…
▽ More
A new $β$-metastable Ti-alloy is designed with the aim to obtain a TWIP alloy but positioned at the limit between the TRIP/TWIP and the TWIP dominated regime. The designed alloy exhibits a large ductility combined with an elevated and stable work-hardening rate. Deformation occurring by formation and multiplication of {332}<113> twins is evidenced and followed by in-situ electron microscopy, and no primary stress induced martensite is observed. Since microstructural investigations of the deformation mechanisms show a highly heterogeneous deformation, the reason of the large ductility is then investigated. The spatial strain distribution is characterized by micro-scale digital image correlation, and the regions highly deformed are found to stand at the crossover between twins, or at the intersection between deformation twins and grain boundaries. Detailed electron back-scattered imaging in such regions of interest finally allowed to evidence the formation of thin needles of stress induced martensite. The latter is thus interpreted as an accommodation mechanism, relaxing the local high strain fields, which ensures a large and stable plastic deformation of this newly designed Ti-alloy.
△ Less
Submitted 12 May, 2021; v1 submitted 28 February, 2021;
originally announced March 2021.
-
From single phase to dual-phase TRIP-TWIP titanium alloys for the improvement of the yield strength
Authors:
Lola Lilensten,
Yolaine Danard,
Régis Poulain,
Raphaëlle Guillou,
Jean-Marc Joubert,
Loïc Perrière,
Philippe Vermaut,
Dominique Thiaudière,
Frédéric Prima
Abstract:
Aiming at increasing the yield strength of transformation and twinning induced plasticity (TRIP and TWIP) titanium alloys, a dual-phase $α$/$β$ alloy is designed and studied. The composition Ti 7Cr 1.5Sn (wt.%) is proposed, based on an approach coupling Calphad calculations and classical Bo-Md design tool used in Ti-alloys. Its microstructure is made of 20% of $α$ precipitates in a $β$ matrix, the…
▽ More
Aiming at increasing the yield strength of transformation and twinning induced plasticity (TRIP and TWIP) titanium alloys, a dual-phase $α$/$β$ alloy is designed and studied. The composition Ti 7Cr 1.5Sn (wt.%) is proposed, based on an approach coupling Calphad calculations and classical Bo-Md design tool used in Ti-alloys. Its microstructure is made of 20% of $α$ precipitates in a $β$ matrix, the matrix having optimal Bo and Md parameters for deformation twinning and martensitic transformation. The alloy indeed displays a yield strength of 760 MPa, about 200 MPa above that of a Ti 8.5Cr 1.5Sn (wt.%) single beta phase TRIP/TWIP alloy, combined with good ductility and work-hardening. In situ synchrotron X ray diffraction and post-mortem electron back-scattered analyses are performed to characterize the deformation mechanisms. They evidence that the TRIP and TWIP mechanisms are successfully obtained in the material, validating the design strategy. The interaction of the precipitates with the {332}<113> $β$ twins is analyzed, evidencing that the precipitates are sheared when hit by a twin, and therefore do not hinder the propagation of the twins. The detailed nature of the interaction is discussed, as well as the impact of the precipitates on the mechanical properties.
△ Less
Submitted 23 October, 2019;
originally announced October 2019.