-
Advanced Maximum Adhesion Tracking Strategies in Railway Traction Drives
Authors:
Ahmed Fathy Abouzeid,
Juan Manuel Guerrero,
Lander Lejarza,
Iker Muniategui,
Aitor Endemaño,
Fernando Briz
Abstract:
Modern railway traction systems are often equipped with anti-slip control strategies to comply with performance and safety requirements. A certain amount of slip is needed to increase the torque transferred by the traction motors onto the rail. Commonly, constant slip control is used to limit the slip velocity between the wheel and rail avoiding excessive slippage and vehicle derailment. This is a…
▽ More
Modern railway traction systems are often equipped with anti-slip control strategies to comply with performance and safety requirements. A certain amount of slip is needed to increase the torque transferred by the traction motors onto the rail. Commonly, constant slip control is used to limit the slip velocity between the wheel and rail avoiding excessive slippage and vehicle derailment. This is at the price of not fully utilizing the train's traction and braking capabilities. Finding the slip at which maximum traction force occurs is challenging due to the non-linear relationship between slip and wheel-rail adhesion coefficient, as well as to its dependence on rail and wheel conditions. Perturb and observe (P\&O) and steepest gradient (SG) methods have been reported for the Maximum Adhesion Tracking (MAT) search. However, both methods exhibit weaknesses. Two new MAT strategies are proposed in this paper which overcome the limitations of existing methods, using Fuzzy Logic Controller (FLC) and Particle Swarm Optimization (PSO) respectively. Existing and proposed methods are first simulated and further validated experimentally using a scaled roller rig under identical conditions. The results show that the proposed methods improve the traction capability with lower searching time and oscillations compared to existing solutions. Tuning complexity and computational requirements will also be shown to be favorable to the proposed methods.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
Design and implementation of multiprotocol framework for residential prosumer incorporation in flexibility markets
Authors:
Miguel Gayo,
Francisco Javier Rodríguez,
Carlos Santos,
Ying Wu,
Yanpeng Wu,
Juan C. Vasquez,
Josep M. Guerrero
Abstract:
The growth of distributed renewable energy in the electrical grid presents challenges to its stability and quality. To address this at the local level, flexibility energy strategies emerge as an innovative technique. However, managing these strategies in residential areas becomes complex due to the unique characteristics of each prosumer. A major challenge lies in managing communication among dive…
▽ More
The growth of distributed renewable energy in the electrical grid presents challenges to its stability and quality. To address this at the local level, flexibility energy strategies emerge as an innovative technique. However, managing these strategies in residential areas becomes complex due to the unique characteristics of each prosumer. A major challenge lies in managing communication among diverse devices with different protocols. To address these issues, a comprehensive framework is designed and implemented to facilitate prosumers' integration in flexibility strategies, addressing communication at various levels. The effectiveness of the proposed framework is demonstrated through its implementation in a real smart home environment with diverse devices. The framework enables seamless integration and communication between IoT devices and IEC 61,850-compliant power devices. This research presents a novel approach to address the challenges of managing flexibility strategies in residential areas, providing a practical solution for prosumers to actively participate in optimizing energy consumption and enhancing the stability and quality of the electricity system amidst the growing integration of distributed renewable energy.
△ Less
Submitted 6 February, 2024;
originally announced February 2024.
-
A Harmonic-based Fault detection algorithm for Microgrids
Authors:
Wael Al Hanaineh,
Jose Matas,
Jorge. El mariachet,
Josep. M. Guerrero
Abstract:
The trend toward Microgrids (MGs) is significantly increasing by employing Distributed Generators (DGs) which leads to new challenges, especially in the fault detection. This paper proposes an algorithm based on the Total Harmonic Distortion (THD) of the grid voltages to detect the events of faults in MGs. The algorithm uses the THD together with the estimate amplitude voltages and the zero-sequen…
▽ More
The trend toward Microgrids (MGs) is significantly increasing by employing Distributed Generators (DGs) which leads to new challenges, especially in the fault detection. This paper proposes an algorithm based on the Total Harmonic Distortion (THD) of the grid voltages to detect the events of faults in MGs. The algorithm uses the THD together with the estimate amplitude voltages and the zero-sequence component for the detection and identification of the faults. The performance is evaluated by using MATLAB/Simulink simulations to validate the capability for detecting different fault types in the least possible time.
△ Less
Submitted 28 March, 2023;
originally announced March 2023.
-
Portable Multi-Hypothesis Monte Carlo Localization for Mobile Robots
Authors:
Alberto Garcia,
Francisco Martin,
Jose Miguel Guerrero,
Francisco J. Rodriguez,
Vicente Matellan
Abstract:
Self-localization is a fundamental capability that mobile robot navigation systems integrate to move from one point to another using a map. Thus, any enhancement in localization accuracy is crucial to perform delicate dexterity tasks. This paper describes a new location that maintains several populations of particles using the Monte Carlo Localization (MCL) algorithm, always choosing the best one…
▽ More
Self-localization is a fundamental capability that mobile robot navigation systems integrate to move from one point to another using a map. Thus, any enhancement in localization accuracy is crucial to perform delicate dexterity tasks. This paper describes a new location that maintains several populations of particles using the Monte Carlo Localization (MCL) algorithm, always choosing the best one as the sytems's output. As novelties, our work includes a multi-scale match matching algorithm to create new MCL populations and a metric to determine the most reliable. It also contributes the state-of-the-art implementations, enhancing recovery times from erroneous estimates or unknown initial positions. The proposed method is evaluated in ROS2 in a module fully integrated with Nav2 and compared with the current state-of-the-art Adaptive ACML solution, obtaining good accuracy and recovery times.
△ Less
Submitted 15 September, 2022;
originally announced September 2022.
-
Distributed Dynamic State-Input Estimation for Power Networks of Microgrids and Active Distribution Systems with Unknown Inputs
Authors:
Bang L. H. Nguyen,
Tuyen V. Vu,
Joseph M. Guerrero,
Mischael Steurer,
Karl Schoder,
Tuan Ngo
Abstract:
This paper proposes a joint input and state dynamic estimation scheme for power networks in microgrids and active distribution systems with unknown inputs. The conventional dynamic state estimation of power networks in the transmission system relies on the forecasting methods to obtain the state-transition model of state variables. However, under highly dynamic conditions in the operation of micro…
▽ More
This paper proposes a joint input and state dynamic estimation scheme for power networks in microgrids and active distribution systems with unknown inputs. The conventional dynamic state estimation of power networks in the transmission system relies on the forecasting methods to obtain the state-transition model of state variables. However, under highly dynamic conditions in the operation of microgrids and active distribution networks, this approach may become ineffective as the forecasting accuracy is not guaranteed. To overcome such drawbacks, this paper employs the power networks model derived from the physical equations of branch currents. Specifically, the power network model is a linear state-space model, in which the state vector consists of branch currents, and the input vector consists of bus voltages. To estimate both state and input variables, we propose linear Kalman-based dynamic filtering algorithms in batch-mode regression form, considering the cross-correlation between states and inputs. For the scalability of the proposed scheme, the distributed implementation is also presented. Complementarily, the predicted state and input vectors are leveraged for bad data detection. Results carried out on a 13-bus microgrid system in real-time Opal-RT platform demonstrate the effectiveness of the proposed method in comparison with the traditional weighted least square and tracking state estimation methods.
△ Less
Submitted 3 August, 2021;
originally announced August 2021.
-
A Non-Isolated High Step-Up Interleaved DC-DC Converter with Diode-Capacitor Multiplier Cells and Dual Coupled Inductors
Authors:
Mamdouh L. Alghaythi,
Robert M. Oconnell,
Naz E. Islam,
Josep M. Guerrero
Abstract:
In this paper, a non-isolated high step-up dc-dc converter is presented. The proposed converter is composed of an interleaved structure and diode-capacitor multiplier cells for interfacing low-voltage renewable energy sources to high-voltage distribution buses. The aforementioned topology can provide a very high voltage gain due to employing the coupled inductors and the diode-capacitor cells. The…
▽ More
In this paper, a non-isolated high step-up dc-dc converter is presented. The proposed converter is composed of an interleaved structure and diode-capacitor multiplier cells for interfacing low-voltage renewable energy sources to high-voltage distribution buses. The aforementioned topology can provide a very high voltage gain due to employing the coupled inductors and the diode-capacitor cells. The coupled inductors are connected to the diode-capacitor multiplier cells to achieve the interleaved energy storage in the output side. Furthermore, the proposed topology provides continuous input current with low voltage stress on the power devices. The reverse recovery problem of the diodes is reduced. This topology can be operated at a reduced duty cycle by adjusting the turn ratio of the coupled inductors. Moreover, the performance comparison between the proposed topology and other converters are introduced. The design considerations operation principle, steady-state analysis, simulation results, and experimental verifications are presented. Therefore, a 500-W hardware prototype with an input voltage of 30-V and an output voltage of 1000-V is built to verify the performance and the theoretical analysis.
△ Less
Submitted 9 September, 2020;
originally announced September 2020.
-
A Two-Layer Distributed Control Method for Islanded Networked Microgrid Systems
Authors:
Xiaoyu Wu,
Yin Xu,
Xiangyu Wu,
**ghan He,
Josep M. Guerrero,
Chen-Ching Liu,
Kevin P. Schneider,
Dan T. Ton
Abstract:
This paper presents a two-layer, four-level distributed control method for networked microgrid (NMG) systems, taking into account the proprietary nature of microgrid (MG) owners. The proposed control architecture consists of a MG-control layer and a NMG-control layer. In the MG layer, the primary and distrib-uted secondary control realize accurate power sharing among distributed generators (DGs) a…
▽ More
This paper presents a two-layer, four-level distributed control method for networked microgrid (NMG) systems, taking into account the proprietary nature of microgrid (MG) owners. The proposed control architecture consists of a MG-control layer and a NMG-control layer. In the MG layer, the primary and distrib-uted secondary control realize accurate power sharing among distributed generators (DGs) and the frequency/voltage reference following within each MG. In the NMG layer, the tertiary control enables regulation of the power flowing through the point of common coupling (PCC) of each MG in a decentralized manner. Furthermore, the distributed quaternary control restores system frequency and critical bus voltage to their nominal values and ensures accurate power sharing among MGs. A small-signal dynamic model is developed to evaluate dynamic performance of NMG systems with the proposed control method. Time-domain simulations as well as experiments on NMG test systems are performed to validate the effectiveness of the proposed method.
△ Less
Submitted 28 March, 2019; v1 submitted 19 October, 2018;
originally announced October 2018.
-
Hierarchical Plug-and-Play Voltage/Current Controller of DC Microgrid Clusters with Grid-Forming/Feeding Converters: Line-independent Primary Stabilization and Leader-based Distributed Secondary Regulation
Authors:
Renke Han,
Michele Tucci,
Raffaele Soloperto,
Andrea Martinelli,
Giancarlo Ferrari-Trecate,
Josep M. Guerrero
Abstract:
Considering the structure of dc Microgrids (MGs) composed of grid-forming/feeding converters, a hierarchical Plug-and-Play (PnP) voltage/current control architecture for MG clusters is proposed. In the primary level, a PnP voltage/current controller is proposed to achieve simultaneous voltage support and current feeding function according to local references. In addition, stabilizing controller is…
▽ More
Considering the structure of dc Microgrids (MGs) composed of grid-forming/feeding converters, a hierarchical Plug-and-Play (PnP) voltage/current control architecture for MG clusters is proposed. In the primary level, a PnP voltage/current controller is proposed to achieve simultaneous voltage support and current feeding function according to local references. In addition, stabilizing controller is characterized by explicit inequalities which are only related to local parameters of a MG.
In the secondary level, for the system with interconnection of MGs, a leader-based voltage/current distributed controller is proposed to achieve both voltage and current regulation without specifying the individual setpoints for each MG. The proposed controller requires a communication network and each controller exchanges information with its communication neighbors only.
With the proposed controller, each MG can plug-in/out of the system seamlessly, irrespectively of the power line parameters and models of other MGs .
The proof of the MG cluster closed-loop stability exploits structured Lyapunov functions, the LaSalle invariance theorem and properties of graph Laplacians. Theoretical results are validated by hardware-in-loop (HiL) tests.
△ Less
Submitted 19 September, 2017; v1 submitted 23 July, 2017;
originally announced July 2017.
-
Small-Signal Analysis of the Microgrid Secondary Control Considering a Communication Time Delay
Authors:
Ernane A. Alves Coelho,
Dan Wu,
Josep M. Guerrero,
Juan C. Vasquez,
Tomislav Dragicevic,
Cedomir Stefanovic,
Petar Popovski
Abstract:
This paper presents a small-signal analysis of an islanded microgrid composed of two or more voltage source inverters connected in parallel. The primary control of each inverter is integrated through internal current and voltage loops using PR compensators, a virtual impedance, and an external power controller based on frequency and voltage droops. The frequency restoration function is implemented…
▽ More
This paper presents a small-signal analysis of an islanded microgrid composed of two or more voltage source inverters connected in parallel. The primary control of each inverter is integrated through internal current and voltage loops using PR compensators, a virtual impedance, and an external power controller based on frequency and voltage droops. The frequency restoration function is implemented at the secondary control level, which executes a consensus algorithm that consists of a load-frequency control and a single time delay communication network. The consensus network consists of a time-invariant directed graph and the output power of each inverter is the information shared among the units, which is affected by the time delay. The proposed small-signal model is validated through simulation results and experimental results. A root locus analysis is presented that shows the behavior of the system considering control parameters and time delay variation.
△ Less
Submitted 5 July, 2017;
originally announced July 2017.
-
Optimal Decentralized Economical-sharing Scheme in Islanded AC Microgrids with Cascaded Inverters
Authors:
Lang Li,
Huawen Ye,
Yao Sun,
Zhangjie Liu,
Hua Han,
Mei Su,
Josep M. Guerrero
Abstract:
To address the economical dispatch problem without communications in islanded AC microgrids consisting of cascaded inverters, this paper proposes an optimal decentralized economical-sharing scheme. In proposed scheme, optimal sharing function of the current is applied to generate the reference voltages. And the frequency is used to drive all distributed generators (DGs) synchronize operation in mi…
▽ More
To address the economical dispatch problem without communications in islanded AC microgrids consisting of cascaded inverters, this paper proposes an optimal decentralized economical-sharing scheme. In proposed scheme, optimal sharing function of the current is applied to generate the reference voltages. And the frequency is used to drive all distributed generators (DGs) synchronize operation in microgrids. When the microgrid is in steady state, DGs share a single common frequency and current in terms of the proposed scheme. Thus the potential advantages of simplicity and decentralized manner are retained. The AC microgrid model has been developed through simulations and experiments to verify the effectiveness and performance of the proposed scheme.
△ Less
Submitted 26 April, 2017;
originally announced April 2017.
-
Plug-and-play and coordinated control for bus-connected AC islanded microgrids
Authors:
Stefano Riverso,
Michele Tucci,
Juan C. Vasquez,
Josep M. Guerrero,
Giancarlo Ferrari-Trecate
Abstract:
This paper presents a distributed control architecture for voltage and frequency stabilization in AC islanded microgrids. In the primary control layer, each generation unit is equipped with a local controller acting on the corresponding voltage-source converter. Following the plug-and-play design approach previously proposed by some of the authors, whenever the addition/removal of a distributed ge…
▽ More
This paper presents a distributed control architecture for voltage and frequency stabilization in AC islanded microgrids. In the primary control layer, each generation unit is equipped with a local controller acting on the corresponding voltage-source converter. Following the plug-and-play design approach previously proposed by some of the authors, whenever the addition/removal of a distributed generation unit is required, feasibility of the operation is automatically checked by designing local controllers through convex optimization. The update of the voltage-control layer, when units plug -in/-out, is therefore automatized and stability of the microgrid is always preserved. Moreover, local control design is based only on the knowledge of parameters of power lines and it does not require to store a global microgrid model. In this work, we focus on bus-connected microgrid topologies and enhance the primary plug-and-play layer with local virtual impedance loops and secondary coordinated controllers ensuring bus voltage tracking and reactive power sharing. In particular, the secondary control architecture is distributed, hence mirroring the modularity of the primary control layer. We validate primary and secondary controllers by performing experiments with balanced, unbalanced and nonlinear loads, on a setup composed of three bus-connected distributed generation units. Most importantly, the stability of the microgrid after the addition/removal of distributed generation units is assessed. Overall, the experimental results show the feasibility of the proposed modular control design framework, where generation units can be added/removed on the fly, thus enabling the deployment of virtual power plants that can be resized over time.
△ Less
Submitted 29 March, 2017;
originally announced March 2017.
-
Stability Analysis of DC Microgrids with Constant Power Load under Distributed Control Method
Authors:
Zhangjie Liu,
Mei Su,
Yao Sun,
Hua Han,
Xiaochao Hou,
Josep M. Guerrero
Abstract:
DC microgrids are becoming popular as effective means to integrate various renewable energy resources. Constant power loads (CPLs) may yield instability due to the negative impedance characteristic. This paper analyzes the stability of the DC microgrid in presence of CPL. Distributed generations (DGs) are controlled by using a distributed controller which aims at current sharing and voltage recove…
▽ More
DC microgrids are becoming popular as effective means to integrate various renewable energy resources. Constant power loads (CPLs) may yield instability due to the negative impedance characteristic. This paper analyzes the stability of the DC microgrid in presence of CPL. Distributed generations (DGs) are controlled by using a distributed controller which aims at current sharing and voltage recovery. For simplicity, a reduced order model is derived on the fundamental of neglecting the transient state of the DC/DC converter. The purpose of this paper is to analyze stability conditions and give the suggestions to design control parameters. The stability conditions are obtained by using inertia theorem. Moreover, this paper makes a further detailed research based on the existed theorems. Simulation results are provided to verify the effectiveness and validity of the proposed theorem.
△ Less
Submitted 19 November, 2017; v1 submitted 27 January, 2017;
originally announced January 2017.
-
On the Impact of Wireless Jamming on the Distributed Secondary Microgrid Control
Authors:
Pietro Danzi,
Cedomir Stefanovic,
Lexuan Meng,
Josep M. Guerrero,
Petar Popovski
Abstract:
The secondary control in direct current microgrids (MGs) is used to restore the voltage deviations caused by the primary droop control, where the latter is implemented locally in each distributed generator and reacts to load variations. Numerous recent works propose to implement the secondary control in a distributed fashion, relying on a communication system to achieve consensus among MG units. T…
▽ More
The secondary control in direct current microgrids (MGs) is used to restore the voltage deviations caused by the primary droop control, where the latter is implemented locally in each distributed generator and reacts to load variations. Numerous recent works propose to implement the secondary control in a distributed fashion, relying on a communication system to achieve consensus among MG units. This paper shows that, if the system is not designed to cope with adversary communication impairments, then a malicious attacker can apply a simple jamming of a few units of the MG and thus compromise the secondary MG control. Compared to other denial-of-service attacks that are oriented against the tertiary control, such as economic dispatch, the attack on the secondary control presented here can be more severe, as it disrupts the basic functionality of the MG.
△ Less
Submitted 22 September, 2016;
originally announced September 2016.
-
A consensus-based secondary control layer for stable current sharing and voltage balancing in DC microgrids
Authors:
Michele Tucci,
Lexuan Meng,
Josep M. Guerrero,
Giancarlo Ferrari-Trecate
Abstract:
In this paper, we propose a secondary consensus-based control layer for current sharing and voltage balancing in DC microGrids (mGs). To this purpose, we assume that Distributed Generation Units (DGUs) are equipped with decentralized primary controllers guaranteeing voltage stability. This goal can be achieved using, for instance, Plug-and-Play (PnP) regulators. We analyze the behavior of the clos…
▽ More
In this paper, we propose a secondary consensus-based control layer for current sharing and voltage balancing in DC microGrids (mGs). To this purpose, we assume that Distributed Generation Units (DGUs) are equipped with decentralized primary controllers guaranteeing voltage stability. This goal can be achieved using, for instance, Plug-and-Play (PnP) regulators. We analyze the behavior of the closed-loop mG by approximating local primary control loops with either unitary gains or first-order transfer functions. Besides proving exponential stability, current sharing, and voltage balancing, we describe how to design secondary controllers in a PnP fashion when DGUs are added or removed. Theoretical results are complemented by simulations, using a 7-DGUs mG implemented in Simulink/PLECS, and experiments on a 3-DGUs mG.
△ Less
Submitted 18 November, 2017; v1 submitted 11 March, 2016;
originally announced March 2016.
-
Secondary Frequency and Voltage Control of Islanded Microgrids via Distributed Averaging
Authors:
John W. Simpson-Porco,
Qobad Shafiee,
Florian Dorfler,
Juan C. Vasquez,
Josep M. Guerrero,
Francesco Bullo
Abstract:
In this work we present new distributed controllers for secondary frequency and voltage control in islanded microgrids. Inspired by techniques from cooperative control, the proposed controllers use localized information and nearest-neighbor communication to collectively perform secondary control actions. The frequency controller rapidly regulates the microgrid frequency to its nominal value while…
▽ More
In this work we present new distributed controllers for secondary frequency and voltage control in islanded microgrids. Inspired by techniques from cooperative control, the proposed controllers use localized information and nearest-neighbor communication to collectively perform secondary control actions. The frequency controller rapidly regulates the microgrid frequency to its nominal value while maintaining active power sharing among the distributed generators. Tuning of the voltage controller provides a simple and intuitive trade-off between the conflicting goals of voltage regulation and reactive power sharing. Our designs require no knowledge of the microgrid topology, impedances or loads. The distributed architecture allows for flexibility and redundancy, and eliminates the need for a central microgrid controller. We provide a voltage stability analysis and present extensive experimental results validating our designs, verifying robust performance under communication failure and during plug-and-play operation.
△ Less
Submitted 26 April, 2015;
originally announced April 2015.
-
A decentralized scalable approach to voltage control of DC islanded microgrids
Authors:
Michele Tucci,
Stefano Riverso,
Juan C. Vasquez,
Josep M. Guerrero,
Giancarlo Ferrari-Trecate
Abstract:
We propose a new decentralized control scheme for DC Islanded microGrids (ImGs) composed by several Distributed Generation Units (DGUs) with a general interconnection topology. Each local controller regulates to a reference value the voltage of the Point of Common Coupling (PCC) of the corresponding DGU. Notably, off-line control design is conducted in a Plug-and-Play (PnP) fashion meaning that (i…
▽ More
We propose a new decentralized control scheme for DC Islanded microGrids (ImGs) composed by several Distributed Generation Units (DGUs) with a general interconnection topology. Each local controller regulates to a reference value the voltage of the Point of Common Coupling (PCC) of the corresponding DGU. Notably, off-line control design is conducted in a Plug-and-Play (PnP) fashion meaning that (i) the possibility of adding/removing a DGU without spoiling stability of the overall ImG is checked through an optimization problem; (ii) when a DGU is plugged in or out at most neighbouring DGUs have to update their controllers and (iii) the synthesis of a local controller uses only information on the corresponding DGU and lines connected to it. This guarantee total scalability of control synthesis as the ImG size grows or DGU gets replaced. Yes, under mild approximations of line dynamics, we formally guarantee stability of the overall closed-loop ImG. The performance of the proposed controllers is analyzed simulating different scenarios in PSCAD.
△ Less
Submitted 24 March, 2015; v1 submitted 21 March, 2015;
originally announced March 2015.
