Showing 1–15 of 15 results for author: Guenon, S

Terahertz emission from mutually synchronized standalone Bi2Sr2CaCu2O8+x intrinsic-Josephson-junction stacks

Authors: Raphael Wieland, Olcay Kizilaslan, Nickolay Kinev, Eric Dorsch, Stefan Guénon, Ziyu Song, Zihan Wei, Huabing Wang, Peiheng Wu, Dieter Koelle, Valery P. Koshelets, Reinhold Kleiner

Abstract: Suitably patterned single crystals made of the cuprate superconductor Bi$_2$Sr$_2$CaCu$_2$O$_{8+x}$ (BSCCO), intrinsically forming a stack of Josephson junctions, can generate electromagnetic radiation in the lower terahertz regime. Due to Joule heating the emission power of single stacks seems to be limited to values below 100 $μ$W. To increase the radiation power, mutually synchronized arrays si… ▽ More Suitably patterned single crystals made of the cuprate superconductor Bi$_2$Sr$_2$CaCu$_2$O$_{8+x}$ (BSCCO), intrinsically forming a stack of Josephson junctions, can generate electromagnetic radiation in the lower terahertz regime. Due to Joule heating the emission power of single stacks seems to be limited to values below 100 $μ$W. To increase the radiation power, mutually synchronized arrays situated on the same BSCCO base crystal have been studied. Mutual electromagnetic interactions via a connecting BSCCO base crystal have been considered essential for synchronization, but the approach still suffers from Joule heating, preventing the synchronization of more than three stacks. In the present paper we show, on the basis of two emitting stacks, that mutual synchronization can also be achieved by stand-alone stacks contacted by gold layers and sharing only a common gold layer. Compared to BSCCO base crystals, the gold layers have a much higher thermal conductivity and their patterning is not very problematic. We analyze our results in detail, showing that the two oscillators exhibit phase correlations over a range of $\pm$0.4 GHz relative to their center frequencies, which we mainly studied between 745 GHz and 765 GHz. However, we also find that strong phase gradients in the beams radiated from both the mutually locked stacks and the unlocked ones play an important role and, presumably, diminish the detected emission power due to destructive interference. We speculate that the effect arises from higher-order cavity modes which are excited in the individual stacks. Our main message is that the mutual interaction provided by a common gold layer may open new possibilities for relaxing the Joule-heating-problem, allowing the synchronization of a higher number of stacks. Our findings may boost attempts to substantially increase the output power levels of the BSCCO terahertz oscillators. △ Less

Submitted 31 May, 2024; originally announced May 2024.

Laser-induced quenching of metastability at the Mott-insulator to metal transition

Authors: Theodor Luibrand, Lorenzo Fratino, Farnaz Tahouni-Bonab, Amihai Kronman, Yoav Kalcheim, Ivan K. Schuller, Marcelo Rozenberg, Reinhold Kleiner, Dieter Koelle, Stefan Guénon

Abstract: There is growing interest in strongly correlated insulator thin films because the intricate interplay of their intrinsic and extrinsic state variables causes memristive behavior that might be used for bio-mimetic devices in the emerging field of neuromorphic computing. In this study we find that laser irradiation tends to drive V$_2$O$_3$ from supercooled/superheated metastable states towards ther… ▽ More There is growing interest in strongly correlated insulator thin films because the intricate interplay of their intrinsic and extrinsic state variables causes memristive behavior that might be used for bio-mimetic devices in the emerging field of neuromorphic computing. In this study we find that laser irradiation tends to drive V$_2$O$_3$ from supercooled/superheated metastable states towards thermodynamic equilibrium, most likely in a non-thermal way. We study thin films of the prototypical Mott-insulator V$_2$O$_3$, which show spontaneous phase separation into metal-insulator herringbone domains during the Mott transition. Here, we use low-temperature microscopy to investigate how these metal-insulator domains can be modified by scanning a focused laser beam across the thin film surface. We find that the response depends on the thermal history: When the thin film is heated from below the Mott transition temperature, the laser beam predominantly induces metallic domains. On the contrary, when the thin film is cooled from a temperature above the transition, the laser beam predominantly induces insulating domains. Very likely, the V$_2$O$_3$ thin film is in a superheated or supercooled state, respectively, during the first-order phase transition, and the perturbation by a laser beam drives these metastable states into stable ones. This way, the thermal history is locally erased. Our findings are supported by a phenomenological model with a laser-induced lowering of the energy barrier between the metastable and equilibrium states. △ Less

Submitted 22 January, 2024; originally announced January 2024.

Comments: 14 pages, 10 figures

Characteristic lengthscales of the electrically-induced insulator-to-metal transition

Authors: Theodor Luibrand, Adrien Bercher, Rodolfo Rocco, Farnaz Tahouni-Bonab, Lucia Varbaro, Carl Willem Rischau, Claribel Domínguez, Yixi Zhou, Weiwei Luo, Soumen Bag, Lorenzo Fratino, Reinhold Kleiner, Stefano Gariglio, Dieter Koelle, Jean-Marc Triscone, Marcelo J. Rozenberg, Alexey B. Kuzmenko, Stefan Guénon, Javier del Valle

Abstract: Some correlated materials display an insulator-to-metal transition as the temperature is increased. In most cases this transition can also be induced electrically, resulting in volatile resistive switching due to the formation of a conducting filament. While this phenomenon has attracted much attention due to potential applications, many fundamental questions remain unaddressed. One of them is its… ▽ More Some correlated materials display an insulator-to-metal transition as the temperature is increased. In most cases this transition can also be induced electrically, resulting in volatile resistive switching due to the formation of a conducting filament. While this phenomenon has attracted much attention due to potential applications, many fundamental questions remain unaddressed. One of them is its characteristic lengths: what sets the size of these filaments, and how does this impact resistive switching properties. Here we use a combination of wide-field and scattering-type scanning near-field optical microscopies to characterize filament formation in NdNiO3 and SmNiO3 thin films. We find a clear trend: smaller filaments increase the current density, yielding sharper switching and a larger resistive drop. With the aid of numerical simulations, we discuss the parameters controlling the filament width and, hence, the switching properties. △ Less

Submitted 1 January, 2023; originally announced January 2023.

Optical imaging of strain-mediated phase coexistence during electrothermal switching in a Mott insulator

Authors: Matthias Lange, Stefan Guénon, Yoav Kalcheim, Theodor Luibrand, Nicolas Manuel Vargas, Dennis Schwebius, Reinhold Kleiner, Ivan K. Schuller, Dieter Koelle

Abstract: Resistive-switching -- the current-/voltage-induced electrical resistance change -- is at the core of memristive devices, which play an essential role in the emerging field of neuromorphic computing. This study is about resistive switching in a Mott-insulator, which undergoes a thermally driven metal-to-insulator transition. Two distinct switching mechanisms were reported for such a system: electr… ▽ More Resistive-switching -- the current-/voltage-induced electrical resistance change -- is at the core of memristive devices, which play an essential role in the emerging field of neuromorphic computing. This study is about resistive switching in a Mott-insulator, which undergoes a thermally driven metal-to-insulator transition. Two distinct switching mechanisms were reported for such a system: electric-field-driven resistive switching and electrothermal resistive switching. The latter results from an instability caused by Joule heating. Here, we present the visualization of the reversible resistive switching in a planar V$_2$O$_3$ thin-film device using high-resolution wide-field microscopy in combination with electric transport measurements. We investigate the interaction of the electrothermal instability with the strain-induced spontaneous phase-separation in the V$_2$O$_3$ thin film at the Mott-transition. The photomicrographs show the formation of a narrow metallic filament with a minimum width $\lesssim$ 500\,nm. Although the filament formation and the overall shape of the current-voltage characteristics (IVCs) are typical of an electrothermal breakdown, we also observe atypical effects like oblique filaments, filament splitting, and hysteretic IVCs with sawtooth-like jumps at high currents in the low-resistance regime. We were able to reproduce the experimental results in a numerical model based on a two-dimensional resistor network. This model demonstrates that resistive switching, in this case, is indeed electrothermal and that the intrinsic heterogeneity is responsible for the atypical effects. This heterogeneity is strongly influenced by strain, thereby establishing a link between switching dynamics and structural properties. △ Less

Submitted 17 June, 2021; v1 submitted 26 September, 2020; originally announced September 2020.

Comments: (18 pages, 12 figures)

A High-Resolution Combined Scanning Laser- and Widefield Polarizing Microscope for Imaging at Temperatures from 4 K to 300 K

Authors: Matthias Lange, Stefan Guénon, Felix Lever, Reinhold Kleiner, Dieter Koelle

Abstract: Polarized light microscopy, as a contrast-enhancing technique for optically anisotropic materials, is a method well suited for the investigation of a wide variety of effects in solid-state physics, as for example birefringence in crystals or the magneto-optical Kerr effect (MOKE). We present a microscopy setup that combines a widefield microscope and a confocal scanning laser microscope with polar… ▽ More Polarized light microscopy, as a contrast-enhancing technique for optically anisotropic materials, is a method well suited for the investigation of a wide variety of effects in solid-state physics, as for example birefringence in crystals or the magneto-optical Kerr effect (MOKE). We present a microscopy setup that combines a widefield microscope and a confocal scanning laser microscope with polarization-sensitive detectors. By using a high numerical aperture objective, a spatial resolution of about 240 nm at a wavelength of 405 nm is achieved. The sample is mounted on a $^4$He continuous flow cryostat providing a temperature range between 4 K and 300 K, and electromagnets are used to apply magnetic fields of up to 800 mT with variable in-plane orientation and 20 mT with out-of-plane orientation. Typical applications of the polarizing microscope are the imaging of the in-plane and out-of-plane magnetization via the longitudinal and polar MOKE, imaging of magnetic flux structures in superconductors covered with a magneto-optical indicator film via Faraday effect or imaging of structural features, such as twin-walls in tetragonal SrTiO$_3$. The scanning laser microscope furthermore offers the possibility to gain local information on electric transport properties of a sample by detecting the beam-induced voltage change across a current-biased sample. This combination of magnetic, structural and electric imaging capabilities makes the microscope a viable tool for research in the fields of oxide electronics, spintronics, magnetism and superconductivity. △ Less

Submitted 15 November, 2017; originally announced November 2017.

Comments: 14 pages, 11 figures. The following article has been accepted by Review of Scientific Instruments. After it is published, it will be found at http://aip.scitation.org/journal/rsi

Journal ref: Review of Scientific Instruments 88, 123705 (2017)

Search for New Superconductors: An Electro-Magnetic Phase Transition in an Iron Meteorite Inclusion at 117 K

Authors: Stefan Guénon, Juan Gabriel Ramírez, Ali C. Basaran, Jamie Wampler, Mark Thiemens, Ivan K. Schuller

Abstract: The discovery of superconductivity in pnictides and iron chalcogenides inspires the search for new iron based superconducting phases. Iron-rich meteorites present a unique opportunity for this search, because they contain a broad range of compounds produced under extreme growth conditions. We investigated a natural iron sulfide based materials (Troilite) inclusion with its associated minerals in t… ▽ More The discovery of superconductivity in pnictides and iron chalcogenides inspires the search for new iron based superconducting phases. Iron-rich meteorites present a unique opportunity for this search, because they contain a broad range of compounds produced under extreme growth conditions. We investigated a natural iron sulfide based materials (Troilite) inclusion with its associated minerals in the iron meteorite Tlacotepec. Tlacotepec formed in an asteroidal core under high pressure and at high temperature over millions of years, while insoluble sulfur rich materials segregated into inclusions during cooling along with included minerals. The search for superconductivity in these heterogeneous materials requires a technique capable of detecting minute amounts of a superconducting phase embedded in a non-superconducting matrix. We used Magnetic Field Modulated Microwave Spectroscopy (MFMMS), a very sensitive, selective, and non-destructive technique, to search for superconductivity in heterogeneous systems. Here, we report the observation of an electro-magnetic phase transition at 117 K that causes a MFMMS-response typical of a superconductor. A pronounced and reproducible peak together with isothermal magnetic field sweeps prove the appearance of a new electromagnetic phase below 117 K. This is very similar to the characteristic response due to flux trap** in a granular superconductor with a short coherence length. Although the compound responsible for the peak in the MFMMS-spectra was not identified, it is possibly an iron sulfide based phase, or another material heterogeneously distributed over the inclusion. △ Less

Submitted 16 September, 2015; v1 submitted 15 September, 2015; originally announced September 2015.

Comments: 24 pages, 7 figures

Highly Effective Superconducting Vortex Pinning in Conformal Crystals

Authors: S. Guénon, Y. J. Rosen, Ali C. Basaran, Ivan K. Schuller

Abstract: We have investigated the vortex dynamics in superconducting thin film devices with non-uniform patterns of artificial pinning centers (APCs). The magneto-transport properties of a conformal crystal and a randomly diluted APC pattern are compared with that of a triangular reference lattice. We have found that in both cases the magneto-resistance below the first matching field of the triangular refe… ▽ More We have investigated the vortex dynamics in superconducting thin film devices with non-uniform patterns of artificial pinning centers (APCs). The magneto-transport properties of a conformal crystal and a randomly diluted APC pattern are compared with that of a triangular reference lattice. We have found that in both cases the magneto-resistance below the first matching field of the triangular reference lattice is significantly reduced. For the conformal crystal, the magneto-resistance is below the noise floor indicating highly effective vortex pinning over a wide magnetic field range. Further, we have discovered that for asymmetric patterns the R vs. H curves are mostly symmetric.This implies that the enhanced vortex pinning is due to the commensurability with a stripe in the non-uniform APC pattern and not due to a rearrangement and compression of the whole vortex lattice. △ Less

Submitted 24 May, 2013; originally announced May 2013.

Comments: submitted to APL on 29/04/13

Electrical Breakdown in a V2O3 device at the Insulator to Metal Transition

Authors: S. Guénon, S. Scharinger, Siming Wang, J. G Ramírez, D. Koelle, R. Kleiner, Ivan K. Schuller

Abstract: We have measured the electrical properties of a V2O3 thin film micro bridge at the insulator metal transition (IMT). Discontinuous jumps to lower voltages in the current voltage characteristic (IV) followed by an approximately constant voltage progression for high currents indicate an electrical breakdown of the device. In addition, the IV curve shows hysteresis and a training effect, i.e. the sub… ▽ More We have measured the electrical properties of a V2O3 thin film micro bridge at the insulator metal transition (IMT). Discontinuous jumps to lower voltages in the current voltage characteristic (IV) followed by an approximately constant voltage progression for high currents indicate an electrical breakdown of the device. In addition, the IV curve shows hysteresis and a training effect, i.e. the subsequent IV loops are different from the first IV loop after thermal cycling. Low temperature scanning electron microscopy (LTSEM) reveals that the electrical breakdown over the whole device is caused by the formation of electro-thermal domains (ETDs), i.e. the current and temperature redistribution in the device. On the contrary, at the nanoscale, the electrical breakdown causes the IMT of individual domains. In a numerical model we considered these domains as a network of resistors and we were able to reproduce the electro-thermal breakdown as well as the hysteresis and the training effect in the IVs. △ Less

Submitted 2 November, 2012; v1 submitted 25 October, 2012; originally announced October 2012.

Journal ref: EPL 101 57003 2013

Hot-spot formation in stacks of intrinsic Josephson junctions in Bi2Sr2CaCu2O8

Authors: B. Gross, S. Guenon, J. Yuan, M. Y. Li, J. Li, A. Iishi, R. G. Mints, T. Hatano, P. H. Wu, D. Koelle, H. B. Wang, R. Kleiner

Abstract: We have studied experimentally and numerically temperature profiles and the formation of hot spots in intrinsic Josephson junction stacks in Bi2Sr2CaCu2O8 (BSCCO). The superconducting stacks are biased in a state where all junctions are resistive. The formation of hot spots in this system is shown to arise mainly from the strongly negative temperature coefficient of the c-axis resistivity of BSCCO… ▽ More We have studied experimentally and numerically temperature profiles and the formation of hot spots in intrinsic Josephson junction stacks in Bi2Sr2CaCu2O8 (BSCCO). The superconducting stacks are biased in a state where all junctions are resistive. The formation of hot spots in this system is shown to arise mainly from the strongly negative temperature coefficient of the c-axis resistivity of BSCCO at low temperatures. This leads to situations where the maximum temperature in the hot spot can be below or above the superconducting transition temperature Tc. The numerical simulations are in good agreement with the experimental observations. △ Less

Submitted 20 May, 2013; v1 submitted 27 June, 2012; originally announced June 2012.

Journal ref: Phys. Rev. B 86, 094524 (2012)

Unusual linewidth dependence of coherent THz emission measured from intrinsic Josephson junction stacks in the hot-spot regime

Authors: M. Y. Li, J. Yuan, N. Kinev, J. Li, B. Gross, S. Guenon, A. Ishii, K. Hirata, T. Hatano, D. Koelle, R. Kleiner, V. P. Koshelets, H. B. Wang, P. H. Wu

Abstract: We report on measurements of the linewidth Δf of THz radiation emitted from intrinsic Josephson junction stacks, using a Nb/AlN/NbN integrated receiver for detection. Previous resolution limited measurements indicated that Δf may be below 1 GHz - much smaller than expected from a purely cavity-induced synchronization. While at low bias we found Δf to be not smaller than ? 500 MHz, at high bias, wh… ▽ More We report on measurements of the linewidth Δf of THz radiation emitted from intrinsic Josephson junction stacks, using a Nb/AlN/NbN integrated receiver for detection. Previous resolution limited measurements indicated that Δf may be below 1 GHz - much smaller than expected from a purely cavity-induced synchronization. While at low bias we found Δf to be not smaller than ? 500 MHz, at high bias, where a hotspot coexists with regions which are still superconducting, Δf turned out to be as narrow as 23 MHz. We attribute this to the hotspot acting as a synchronizing element. Δf decreases with increasing bath temperature, a behavior reminiscent of motional narrowing in NMR or ESR, but hard to explain in standard electrodynamic models of Josephson junctions. △ Less

Submitted 11 June, 2012; originally announced June 2012.

Comments: 4 figures, 5 pages

Domain-wall and reverse-domain superconducting states of a Pb thin-film bridge on a ferromagnetic BaFe_{12}O_{19} single crystal

Authors: R. Werner, A. Yu. Aladyshkin, S. Guenon, J. Fritzsche, I. M. Nefedov, V. V. Moshchalkov, R. Kleiner, D. Koelle

Abstract: We report on imaging of the nonuniform superconducting states in a Pb thin film bridge on top of a ferromagnetic BaFe_{12}O_{19} single crystal with a single straight domain wall along the center of the bridge by low-temperature scanning laser microscopy. We have visualized domain wall superconductivity (DWS) close to the critical temperature of Pb, when the Pb film above the domain wall acts as a… ▽ More We report on imaging of the nonuniform superconducting states in a Pb thin film bridge on top of a ferromagnetic BaFe_{12}O_{19} single crystal with a single straight domain wall along the center of the bridge by low-temperature scanning laser microscopy. We have visualized domain wall superconductivity (DWS) close to the critical temperature of Pb, when the Pb film above the domain wall acts as a superconducting path for the current. The evolution of the DWS signal with temperature and the external-field-driven transition from DWS to reverse domain superconductivity was visualized. △ Less

Submitted 30 May, 2011; originally announced May 2011.

Comments: 4 pages, 3 figures

Journal ref: Phys. Rev. B 84, 020505(R) (2011)

Crossover between different regimes of inhomogeneous superconductivity in planar superconductor-ferromagnet hybrids

Authors: A. Yu. Aladyshkin, J. Fritzsche, R. Werner, R. B. G. Kramer, S. Guenon, R. Kleiner, D. Koelle, V. V. Moshchalkov

Abstract: We studied experimentally the effect of a stripe-like domain structure in a ferromagnetic BaFe_{12}O_{19} substrate on the magnetoresistance of a superconducting Pb microbridge. The system was designed in such a way that the bridge is oriented perpendicular to the domain walls. It is demonstrated that depending on the ratio between the amplitude of the nonuniform magnetic field B_0, induced by the… ▽ More We studied experimentally the effect of a stripe-like domain structure in a ferromagnetic BaFe_{12}O_{19} substrate on the magnetoresistance of a superconducting Pb microbridge. The system was designed in such a way that the bridge is oriented perpendicular to the domain walls. It is demonstrated that depending on the ratio between the amplitude of the nonuniform magnetic field B_0, induced by the ferromagnet, and the upper critical field H_{c2} of the superconducting material, the regions of the reverse-domain superconductivity in the H-T plane can be isolated or can overlap (H is the external magnetic field, T is temperature). The latter case corresponds to the condition B_0/H_{c2}<1 and results in the formation of superconductivity above the magnetic domains of both polarities. We discovered the regime of edge-assisted reverse-domain superconductivity, corresponding to localized superconductivity near the edges of the bridge above the compensated magnetic domains. Direct verification of the formation of inhomogeneous superconducting states and external-field-controlled switching between normal state and inhomogeneous superconductivity were obtained by low-temperature scanning laser microscopy. △ Less

Submitted 24 September, 2011; v1 submitted 9 May, 2011; originally announced May 2011.

Comments: 11 pages, 12 figures

Journal ref: Phys. Rev. B 84, 094523 (2011)

Interaction of hot spots and THz waves in Bi_2Sr_2CaCu_2O_8 intrinsic Josephson junction stacks of various geometry

Authors: S. Guénon, M. Grünzweig, B. Gross, J. Yuan, Z. G. Jiang, Y. Y. Zhong, A. Iishi, P. H. Wu, T. Hatano, D. Koelle, H. B. Wang, R. Kleiner

Abstract: At high enough input power in stacks of Bi_2Sr_2CaCu_2O8 intrinsic Josephson junctions a hot spot (a region heated to above the superconducting transition temperature) coexists with regions still in the superconducting state. In the ``cold'' regions cavity resonances can occur, synchronizing the ac Josephson currents and giving rise to strong coherent THz emission. We investigate the interplay of… ▽ More At high enough input power in stacks of Bi_2Sr_2CaCu_2O8 intrinsic Josephson junctions a hot spot (a region heated to above the superconducting transition temperature) coexists with regions still in the superconducting state. In the ``cold'' regions cavity resonances can occur, synchronizing the ac Josephson currents and giving rise to strong coherent THz emission. We investigate the interplay of hot spots and standing electromagnetic waves by low temperature scanning laser microscopy and THz emission measurements, using stacks of various geometries. For a rectangular and a arrow-shaped structure we show that the standing wave can be turned on and off in various regions of the stack structure, depending on the hot spot position. We also report on standing wave and hot spot formation in a disk shaped mesa structure. △ Less

Submitted 12 May, 2010; originally announced May 2010.

Coherent THz emission of Bi_2Sr_2CaCu_2O_8 intrinsic Josephson junction stacks in the hot spot regime

Authors: H. B. Wang, S. Guenon, B. Gross, J. Yuan, Z. G. Jiang, Y. Y. Zhong, M. Gruenzweig, A. Iishi, P. H. Wu, T. Hatano, D. Koelle, R. Kleiner

Abstract: We report on THz emission measurements and low temperature scanning laser imaging of Bi_2Sr_2CaCu_2O_8 intrinsic Josephson junction stacks. Coherent emission is observed at large dc input power, where a hot spot and a standing wave, formed in the "cold" part of the stack, coexist. By varying the hot spot size the cavity resonance frequency and the emitted radiation can be tuned. The linewidth of r… ▽ More We report on THz emission measurements and low temperature scanning laser imaging of Bi_2Sr_2CaCu_2O_8 intrinsic Josephson junction stacks. Coherent emission is observed at large dc input power, where a hot spot and a standing wave, formed in the "cold" part of the stack, coexist. By varying the hot spot size the cavity resonance frequency and the emitted radiation can be tuned. The linewidth of radiation is much smaller than expected from the quality factor of the cavity mode excited. Thus, an additional mechanism of synchronization seems to play a role, possibly arising from nonequilibrium processes at the hot spot edge. △ Less

Submitted 1 May, 2010; originally announced May 2010.

Comments: 4.1 pages, 5 figures

Hot spots and waves in Bi2Sr2CaCu2O8 intrinsic Josephson junction stacks -a study by Low Temperature Scanning Laser Microscopy

Authors: H. B. Wang, S. Guénon, J. Yuan, A. Iishi, S. Arisawa, T. Hatano, T. Yamashita, D. Koelle, R. Kleiner

Abstract: Recently, it has been shown that large stacks of intrinsic Josephson junctions in Bi2Sr2CaCu2O8 emit synchronous THz radiation, the synchronization presumably triggered by a cavity resonance. To investigate this effect we use Low Temperature Scanning Laser Microscopy to image electric field distributions. Apart from verifying the appearance of cavity modes at low bias we find that, in a high inp… ▽ More Recently, it has been shown that large stacks of intrinsic Josephson junctions in Bi2Sr2CaCu2O8 emit synchronous THz radiation, the synchronization presumably triggered by a cavity resonance. To investigate this effect we use Low Temperature Scanning Laser Microscopy to image electric field distributions. Apart from verifying the appearance of cavity modes at low bias we find that, in a high input power regime, standing-wave patterns are created through interactions with a hot spot, possibly pointing to a new mode of generating synchronized radiation in intrinsic Josephson junction stacks. △ Less

Submitted 17 July, 2008; originally announced July 2008.

Comments: 6 pages, 5 figures, supplementary information included