Showing 1–50 of 126 results for author: Guenneau, S

Robust Quasi-Bound States in the continuum: Accidental and Symmetry-Protected Variants in Dielectric Metasurfaces

Authors: Hicham Mangach, Abdelhaq Belkacem, Younes Achaoui, Abdenbi Bouzid, Boris Gralak, Sebastien Guenneau

Abstract: Recently, man-made dielectric materials composed of finite-sized dielectric constituents have emerged as a promising platform for quasi-bound states in the continuum (QBICs). These states allow for an extraordinary confinement of light within regions smaller than the wavelength scale. Known for their exceptional quality factors, they have become crucial assets across a diverse array of application… ▽ More Recently, man-made dielectric materials composed of finite-sized dielectric constituents have emerged as a promising platform for quasi-bound states in the continuum (QBICs). These states allow for an extraordinary confinement of light within regions smaller than the wavelength scale. Known for their exceptional quality factors, they have become crucial assets across a diverse array of applications. Given the circumstances, there is a compelling drive to find meta-designs that can possess multiple QBICs. Here, we demonstrate the existence of two different types of QBICs in silicon-based metasurfaces: accidental QBIC and symmetry-protected QBIC. The accidental QBIC evinces notable resilience to variations in geometrical parameters and symmetry, underscoring its capacity to adeptly navigate manufacturing tolerances while consistently upholding a distinguished quality factor of $10^5$. Conversely, the symmetry-protected QBIC inherently correlates with the disruption of unit cell symmetry. As a result, a phase delay yields an efficient channel for substantial energy transference to the continuum, endowing this variant with an exceedingly high quality factor, approaching $10^8$. Moreover, the manifestation of these QBICs stems from the intricate interplay among out-of-plane electric and magnetic dipoles, alongside in-plane quadrupoles exhibiting odd parities. △ Less

Submitted 17 April, 2024; originally announced April 2024.

Isospectral open cavities and gratings

Authors: Sebastiano Cominelli, Benjamin Vial, Sébastien Guenneau, Richard V. Craster

Abstract: Open cavities are often an essential component in the design of ultra-thin subwavelength metasurfaces and a typical requirement is that cavities have precise, often low frequency, resonances whilst simultaneously being physically compact. To aid this design challenge we develop a methodology to allow isospectral twinning of reference cavities with either smaller or larger ones, enforcing their spe… ▽ More Open cavities are often an essential component in the design of ultra-thin subwavelength metasurfaces and a typical requirement is that cavities have precise, often low frequency, resonances whilst simultaneously being physically compact. To aid this design challenge we develop a methodology to allow isospectral twinning of reference cavities with either smaller or larger ones, enforcing their spectra to coincide so that open resonators are identical in terms of their complex eigenfrequencies. For open systems the spectrum is not purely discrete and real, and we pay special attention to the accurate twinning of leaky modes associated with complex valued eigenfrequencies with an imaginary part orders of magnitude lower than the real part. We further consider twinning of 2D gratings, and model these with Floquet-Bloch conditions along one direction and perfectly matched layers in the other one; complex eigenfrequencies of special interest are located in the vicinity of the positive real line and further depend upon the Bloch wavenumber. The isospectral behaviour is illustrated, and quantified, throughout by numerical simulation using finite element analysis. △ Less

Submitted 21 November, 2023; originally announced January 2024.

High-order homogenisation of the time-modulated wave equation: non-reciprocity for a single varying parameter

Authors: Marie Touboul, Bruno Lombard, Raphaël Assier, Sébastien Guenneau, Richard V Craster

Abstract: Laminated media with material properties modulated in space and time in the form of travelling waves have long been known to exhibit non-reciprocity. However, when using the method of low frequency homogenisation, it was so far only possible to obtain non-reciprocal effective media when both material properties are modulated in time, in the form of a Willis-coupling (or bi-anisotropy in electromag… ▽ More Laminated media with material properties modulated in space and time in the form of travelling waves have long been known to exhibit non-reciprocity. However, when using the method of low frequency homogenisation, it was so far only possible to obtain non-reciprocal effective media when both material properties are modulated in time, in the form of a Willis-coupling (or bi-anisotropy in electromagnetism) model. If only one of the two properties is modulated in time, while the other is kept constant, it was thought impossible for the method of homogenisation to recover the expected non-reciprocity since this Willis-coupling coefficient then vanishes. Contrary to this belief, we show that effective media with a single time-modulated parameter are non-reciprocal, provided homogenization is pushed to the second order. This is illustrated by numerical experiments (dispersion diagrams and time-domain simulations) for a bilayered modulated medium. △ Less

Submitted 19 October, 2023; originally announced November 2023.

An innovative clay metaBrick-based motif to enhance thermal and acoustic insulation

Authors: Brahim Lemkalli, Saad Bensallam, Muamer Kadic, Sébastien Guenneau, Hicham Jakjoud, Abdellah Mir, Younes Achaoui

Abstract: Metamaterials have gained popularity in recent years as a promising avenue for producing innovative materials with distinctive properties that offer unprecedented features. In this study, we address the thermal and acoustic challenges of building materials. We numerically and experimentally investigate a clay metaBrick, which is an innovative metamaterial design based on the existing hollow brick… ▽ More Metamaterials have gained popularity in recent years as a promising avenue for producing innovative materials with distinctive properties that offer unprecedented features. In this study, we address the thermal and acoustic challenges of building materials. We numerically and experimentally investigate a clay metaBrick, which is an innovative metamaterial design based on the existing hollow brick that has shown strong sound and thermal performances. We evaluate the acoustic and thermal characteristics of the clay metaBrick, including sound transmission and heat resistance, using the finite element method. Furthermore, we validate the results experimentally by investigating the behaviors of the wall built on metaBricks in two tests: sound and thermal. We contrast the findings of the metaBrick based wall with performances of a standard hollow brick wall. The metaBrick offers enhanced acoustic and thermal insulation properties compared to the standard brick, with a compressive strength above standards required in the building materials. △ Less

Submitted 8 October, 2023; originally announced October 2023.

Comments: 16 pages, 10 figures

Bi-functional metamaterial based on Helmholtz resonators for sound and heat insulation

Authors: Brahim Lemkalli, Zine El Abiddine Fellah, Sébastien Guenneau, Khalid Lamzoud, Abdellah Mir, Younes Achaoui

Abstract: Over the last few decades, both heat and broadband sound reduction have become increasingly significant as a result of concerns about the environment and noise pollution. In order to address this challenge, we provide a finite element analysis study of an acoustic metamaterial panel consisting of a unit cell made of two Helmholtz Resonators with a guide in between. These panels can attenuate and c… ▽ More Over the last few decades, both heat and broadband sound reduction have become increasingly significant as a result of concerns about the environment and noise pollution. In order to address this challenge, we provide a finite element analysis study of an acoustic metamaterial panel consisting of a unit cell made of two Helmholtz Resonators with a guide in between. These panels can attenuate and control both sound propagation and heat flux. For noise pollution in a building, we first determine the geometric dimension that corresponds to the operative frequency range. Furthermore, we investigate the sound transmission loss of the proposed panel as a function of the periodicity of an array of unit cells. Additionally, we investigate the thermal flux induced by the panel, especially within a 24-hour period. The simulation results show that the proposed panel provides a level of sound attenuation within the frequency range of 400 Hz to 2.5 kHz, as well as interesting heat protection. The structure is compared to panels made up of a homogeneous medium and without Helmholtz resonators. △ Less

Submitted 8 October, 2023; originally announced October 2023.

Comments: 7 pages, 10 figures

High-frequency homogenization for periodic dispersive media

Authors: Marie Touboul, Benjamin Vial, Raphaël Assier, Sébastien Guenneau, Richard Craster

Abstract: High-frequency homogenization is used to study dispersive media, containing inclusions placed periodically, for which the properties of the material depend on the frequency (Lorentz or Drude model with dam**, for example). Effective properties are obtained near a given point of the dispersion diagram in frequency-wavenumber space. The asymptotic approximations of the dispersion diagrams, and the… ▽ More High-frequency homogenization is used to study dispersive media, containing inclusions placed periodically, for which the properties of the material depend on the frequency (Lorentz or Drude model with dam**, for example). Effective properties are obtained near a given point of the dispersion diagram in frequency-wavenumber space. The asymptotic approximations of the dispersion diagrams, and the wavefields, so obtained are then cross-validated via detailed comparison with finite element method simulations in both one and two dimensions. △ Less

Submitted 14 August, 2023; originally announced August 2023.

Electromagnetic cloak design with mono-objective and bi-objective optimizers: seeking the best tradeoff between protection and invisibility

Authors: Ronald Aznavourian, Guillaume Demesy, Sébastien Guenneau, Julien Marot

Abstract: We revisit the design of cloaks, without resorting to any geometric transform. Cancellation techniques and anomalous resonances have been applied for this purpose. Instead of a deductive reasoning, we propose a novel mono-objective optimization algorithm, namely a ternary grey wolf algorithm, and we adapt a bi-objective optimization algorithm. Firstly, the proposed chaotic ternary grey wolf algori… ▽ More We revisit the design of cloaks, without resorting to any geometric transform. Cancellation techniques and anomalous resonances have been applied for this purpose. Instead of a deductive reasoning, we propose a novel mono-objective optimization algorithm, namely a ternary grey wolf algorithm, and we adapt a bi-objective optimization algorithm. Firstly, the proposed chaotic ternary grey wolf algorithm searches three-valued spaces for all permittivity values in the cloak while minimizing the summation of a protection criterion and an invisibility criterion. Secondly, a bi-objective genetic algorithm is adapted to find pairs of optimal values of invisibility and protection. △ Less

Submitted 6 July, 2023; originally announced July 2023.

Subwavelength pulse focusing and perfect absorption in the Maxwell fisheye

Authors: Gautier Lefebvre, Marc Dubois, Younes Achaoui, Ros Kiri Ing, Mathias Fink, Sébastien Guenneau, Patrick Sebbah

Abstract: Maxwell's fisheye is a paradigm for an absolute optical instrument with a refractive index deduced from the stereographic projection of a sphere on a plane. We investigate experimentally the dynamics of flexural waves in a thin plate with a thickness varying according to the Maxwell fisheye index profile and a clamped boundary. We demonstrate subwavelength focusing and temporal pulse compression a… ▽ More Maxwell's fisheye is a paradigm for an absolute optical instrument with a refractive index deduced from the stereographic projection of a sphere on a plane. We investigate experimentally the dynamics of flexural waves in a thin plate with a thickness varying according to the Maxwell fisheye index profile and a clamped boundary. We demonstrate subwavelength focusing and temporal pulse compression at the image point. This is achieved by introducing a sink emitting a cancelling signal optimally shaped using a time-reversal procedure. Perfect absorption and outward going wave cancellation at the focus point are demonstrated. The time evolution of the kinetic energy stored inside the cavity reveals that the sink absorbs energy out of the plate ten times faster than the natural decay rate. △ Less

Submitted 23 June, 2023; originally announced June 2023.

Journal ref: Applied Physics Letters, 123(13), 2023

Polarization State Conversion through Chiral Butterfly Meta-Structure

Authors: Hicham Mangach, Younes Achaoui, Muamer Kadic, Abdenbi Bouzid, Sébastien Guenneau, Shuwen Zeng

Abstract: The recent emergence of chirality in mechanical metamaterials has revolutionized the field, enabling achievements in wave propagation and polarization control. Despite being an intrinsic feature of some molecules and ubiquitous in our surroundings, the incorporation of chirality into mechanical systems has only gained widespread recognition in the last few years. The extra degrees of freedom induc… ▽ More The recent emergence of chirality in mechanical metamaterials has revolutionized the field, enabling achievements in wave propagation and polarization control. Despite being an intrinsic feature of some molecules and ubiquitous in our surroundings, the incorporation of chirality into mechanical systems has only gained widespread recognition in the last few years. The extra degrees of freedom induced by chirality has propelled the study of systems to new heights, leading to a better understanding of the physical laws governing these systems. In this study, we present a structural design of a butterfly meta-structure that exploits the chiral effect to create a 3D chiral butterfly capable of inducing a rotation of 90° in the plane of polarization, enabling a switch between various polarization states within a solid material. Furthermore, our numerical investigation using Finite Element Analysis (FEA) has revealed an unexpected conversion of compressional movement to transverse movement within these structures, further highlighting the transformative potential of chirality in mechanical metamaterials. Thus, revealing an additional degree of freedom that can be manipulated, namely the polarization state. △ Less

Submitted 9 April, 2023; originally announced April 2023.

Comments: 7 Pages, 11 figures

Robust collimated beaming in 3D acoustic sonic crystals

Authors: A. L. Vanel, M. Dubois, C. Tronche, S. Fu, Y. -T. Wang, G. Dupont, A. D. Rakić, K. Bertling, R. Abdeddaim, S. Enoch, R. V. Craster, G. Li, S. Guenneau, J. Perchoux

Abstract: We demonstrate strongly collimated beaming, at audible frequencies, in a three-dimensional acoustic phononic crystal where the wavelength is commensurate with the crystal elements; the crystal is a seemingly simple rectangular cuboid constructed from closely-spaced spheres, and yet demonstrates rich wave phenomena acting as a canonical three-dimensional metamaterial. We employ theory, numerical si… ▽ More We demonstrate strongly collimated beaming, at audible frequencies, in a three-dimensional acoustic phononic crystal where the wavelength is commensurate with the crystal elements; the crystal is a seemingly simple rectangular cuboid constructed from closely-spaced spheres, and yet demonstrates rich wave phenomena acting as a canonical three-dimensional metamaterial. We employ theory, numerical simulation and experiments to design and interpret this collimated beaming phenomenon and use a crystal consisting of a finite rectangular cuboid array of $4\times 10\times 10$ polymer spheres $1.38$~cm in diameter in air, arranged in a primitive cubic cell with the centre-to-centre spacing of the spheres, i.e. the pitch, as $1.5$~cm. Collimation effects are observed in the time domain for chirps with central frequencies at $14.2$~kHz and $18$~kHz, and we deployed a laser feedback interferometer or Self-Mixing Interferometer (SMI) -- a recently proposed technique to observe complex acoustic fields -- that enables experimental visualisation of the pressure field both within the crystal and outside of the crystal. Numerical exploration using a higher-order multi-scale finite element method designed for the rapid and detailed simulation of 3D wave physics further confirms these collimation effects and cross-validates with the experiments. Interpretation follows using High Frequency Homogenization and Bloch analysis whereby the different origin of the collimation at these two frequencies is revealed by markedly different isofrequency surfaces of the sonic crystal. △ Less

Submitted 23 January, 2023; originally announced January 2023.

Comments: 10 pages, 8 figures

The emergence of low-frequency dual Fano resonances in chiral twisting metamaterials

Authors: Brahim Lemkalli, Muamer Kadic, Youssef El Badri, Sébastien Guenneau, Abdellah Mir, Younes Achaoui

Abstract: In the current work, through a finite element analysis, we demonstrate that a configuration of chiral cells having syndiotactic symmetry provides dual Fano resonances at low frequency. From the phononic dispersion and transmission response, we compare the signature provided by a composite made of chiral cells to the ones of homogeneous medium, isotactic nonchiral, and isotactic chiral beams. The s… ▽ More In the current work, through a finite element analysis, we demonstrate that a configuration of chiral cells having syndiotactic symmetry provides dual Fano resonances at low frequency. From the phononic dispersion and transmission response, we compare the signature provided by a composite made of chiral cells to the ones of homogeneous medium, isotactic nonchiral, and isotactic chiral beams. The study results in an innovative design of a mechanical metamaterial that induces the Fano resonance at low frequency with a relatively high quality factor. This might be a significant step forward for mechanical wave filtering and detection. Performances have been evaluated using a sensor that will be implemented as a thermometer. △ Less

Submitted 24 January, 2023; originally announced January 2023.

Comments: 7 pages, 5 figures

Magneto-electric coupling and magnetism in photonic crystals: A high-order homogenization approach in the constitutive equations

Authors: B. Gralak, Y. Liu, S. Guenneau

Abstract: We extend results of [Liu et al. Proc. Roy. Soc. Lond. A 469, 20130240, 2013] on artificial magneto-electric coupling and magnetism in moderate contrast dielectric layered media via high-order homogenization to the three-dimensional setting. For this, we consider asymptotic expansions in the vector Maxwell system. We then illustrate effect of magneto-electric coupling with numerical simulations fo… ▽ More We extend results of [Liu et al. Proc. Roy. Soc. Lond. A 469, 20130240, 2013] on artificial magneto-electric coupling and magnetism in moderate contrast dielectric layered media via high-order homogenization to the three-dimensional setting. For this, we consider asymptotic expansions in the vector Maxwell system. We then illustrate effect of magneto-electric coupling with numerical simulations for a layered system alternating positively and negatively refracting index. We unveil hyperbolic behaviour and magneto-electric coupling and derive a sharper estimate for the anisotropic effective medium in [Ramakrishna et al., J. Mod. Optics, 50, 1419-1430, 2003]. We also revisit the effective medium description of a PT-symmetric layered structure in [Novitsky, Shalin, Novitsky, Phys. Rev. A 99, 043812, 2019], adding higher-order approximation orders. △ Less

Submitted 10 November, 2022; originally announced November 2022.

Comments: 14 pages, 5 figures

Longitudinal-Twist Wave Converter based on Chiral Metamaterials

Authors: Brahim Lemkalli, Muamer Kadic, Youssef El Badri, Sébastien Guenneau, Abdellah Mir, Younes Achaoui

Abstract: Advances in material architectures have enabled endowing materials with exotic attributes not commonly available in the conventional realm of mechanical engineering. Twisting, a mechanism whereby metamaterials are used to transform static axial load into twist motion, is of particular interest to this study. Herein, computations based on the finite element method, corroborated by an analytical app… ▽ More Advances in material architectures have enabled endowing materials with exotic attributes not commonly available in the conventional realm of mechanical engineering. Twisting, a mechanism whereby metamaterials are used to transform static axial load into twist motion, is of particular interest to this study. Herein, computations based on the finite element method, corroborated by an analytical approach derived from applying Lagrange's equations to a monoatomic spring-mass system, are employed to explore the longitudinal-twist (L-T) conversion exhibited by a chiral tetragonal-beam metamaterial. Firstly, we perform an eigenvalue analysis taking into account the polarization states to highlight the potential contribution of the longitudinal mode in the L-T conversion. We contrast the twisting behavior of the chiral cell with that of other homogeneous medium, octagonal-tube, and non-chiral cells. Moreover, we demonstrate the influence of the cell's chirality on the L-T conversion using both time-domain and frequency-domain studies. The findings indicate that at least a portion of the longitudinally propagating wave is transformed into twist throughout a broad frequency range and even quasi-totally converted at distinct frequencies. △ Less

Submitted 28 December, 2022; v1 submitted 6 November, 2022; originally announced November 2022.

Comments: 7 pages, 5 figures

Map** of Elastic Properties of Twisting Metamaterials onto Micropolar Continuum using Static Calculations

Authors: Brahim Lemkalli, Muamer Kadic, Youssef El Badri, Sébastien Guenneau, Abdenbi Bouzid, Younes Achaoui

Abstract: Recent developments in the engineering of metamaterials have brought forth a myriad of mesmerizing mechanical properties that do not exist in ordinary solids. Among these, twisting metamaterials, acoustical chirality, or Willis coupling are sample-size dependent. The purpose of this work is, first, to examine the mechanical performance of a new twisting cubic metamaterial. Then, we perform a compa… ▽ More Recent developments in the engineering of metamaterials have brought forth a myriad of mesmerizing mechanical properties that do not exist in ordinary solids. Among these, twisting metamaterials, acoustical chirality, or Willis coupling are sample-size dependent. The purpose of this work is, first, to examine the mechanical performance of a new twisting cubic metamaterial. Then, we perform a comparative investigation of its twisting behavior using the finite element method on microstructure elements computation, an analytical model, and we compare them to Eringen micropolar continuum. Notably, the results of the three models are in good qualitative and quantitative agreements. Finally, a systematic comparison of dispersion relations was made for the continuum and for the microstructures with different sizes in unit cells as final proof of perfect map**. △ Less

Submitted 28 December, 2022; v1 submitted 29 September, 2022; originally announced September 2022.

Comments: 9 pages, 5 figures

Dynamic cloaking of a diamond-shaped hole in elastic plate

Authors: Kun Tang, Eitam Luz, David Amram, Luna Kadysz, Sebastien Guenneau, Patrick Sebbah

Abstract: Invisibility cloaks for flexural waves have been mostly examined in the continuous-wave regime, while invisibility is likely to deteriorate for short pulses. Here, we propose the practical realization of a unidirectional invisibility cloak for flexural waves based on an area-preserving coordinate transformation. Time-resolved experiments reveal how the invisibility cloak deviates a pulsed plane-wa… ▽ More Invisibility cloaks for flexural waves have been mostly examined in the continuous-wave regime, while invisibility is likely to deteriorate for short pulses. Here, we propose the practical realization of a unidirectional invisibility cloak for flexural waves based on an area-preserving coordinate transformation. Time-resolved experiments reveal how the invisibility cloak deviates a pulsed plane-wave from its initial trajectory, and how the initial wavefront perfectly recombines behind the cloak, leaving the diamond-shaped hole invisible, notwithstanding the appearance of a forerunner. Three-dimensional full-elasticity simulations support our experimental observations. △ Less

Submitted 24 September, 2022; originally announced September 2022.

Transformation twinning to create isospectral cavities

Authors: Simon V. Lenz, Sébastien Guenneau, Bruce W. Drinkwater, Richard V. Craster, Marc W. Holderied

Abstract: Bounded domains have discrete eigenfrequencies/spectra, and cavities with different boundaries and areas have different spectra. A general methodology for isospectral twinning, whereby the spectra of different cavities are made to coincide, is created by combining ideas from across physics including transformation optics, inverse problems and metamaterial cloaking. We twin a hexagonal drum with a… ▽ More Bounded domains have discrete eigenfrequencies/spectra, and cavities with different boundaries and areas have different spectra. A general methodology for isospectral twinning, whereby the spectra of different cavities are made to coincide, is created by combining ideas from across physics including transformation optics, inverse problems and metamaterial cloaking. We twin a hexagonal drum with a deformed hexagonal drum using a non-singular coordinate transform that adjusts the deformed shape by map** a near boundary domain to a zone of heterogeneous anisotropic medium. Splines define the map** zone for twinning these two drums and we verify isospectrality by finite element analysis. △ Less

Submitted 25 July, 2023; v1 submitted 8 September, 2022; originally announced September 2022.

Comments: 6 pages, 3 figures

Asymmetric Heat Transfer with Linear Conductive Metamaterials

Authors: Yishu Su, Ying Li, Minghong Qi, Sebastien Guenneau, Huagen Li, Jian Xiong

Abstract: Asymmetric heat transfer systems, often referred to as thermal diodes or thermal rectifiers, have garnered increasing interest due to their wide range of application possibilities. Most of those previous macroscopic thermal diodes either resort to nonlinear thermal conductivities with strong temperature dependence that may be quite limited by or fixed in natural materials or rely on active modulat… ▽ More Asymmetric heat transfer systems, often referred to as thermal diodes or thermal rectifiers, have garnered increasing interest due to their wide range of application possibilities. Most of those previous macroscopic thermal diodes either resort to nonlinear thermal conductivities with strong temperature dependence that may be quite limited by or fixed in natural materials or rely on active modulation that necessitated auxiliary energy payloads. Here, we establish a straightforward strategy of passively realizing asymmetric heat transfer with linear conductive materials. The strategy also introduces a new interrogative perspective on the design of asymmetric heat transfer utilizing nonlinear thermal conductivity, correcting the misconception that thermal rectification is impossible with separable nonlinear thermal conductivity. The nonlinear perturbation mode can be versatilely engineered to produce an effective and wide-ranging perturbation in the heat conduction, which imitates and bypasses intrinsic thermal nonlinearity constraints set by naturally occurring counterparts. Independent experimental characterizations of surface thermal radiation and thermal convection verified that the heat exchange between a graded linear thermal metamaterial and the ambient can be tailored to achieve macroscopic asymmetric heat transfer. Our work is envisaged to inspire conceptual models for heat transfer control, serving as a robust and convenient platform for advanced thermal management, thermal computation, and heat transport. △ Less

Submitted 8 September, 2022; originally announced September 2022.

Neolithic stone settlements as locally resonant metasurfaces

Authors: Stéphane Brûlé, Bogdan Ungureanu, Stefan Enoch, Sébastien Guenneau

Abstract: We study the dynamic surface response of neolithic stone settlements obtained with seismic ambient noise techniques near the city of Carnac in French Brittany. Surprisingly, we find that menhirs (neolithic human size standing alone granite stones) with an aspect ratio between 1 and 2 periodically arranged atop a thin layer of sandy soil laid on a granite bedrock, exhibit fundamental resonances in… ▽ More We study the dynamic surface response of neolithic stone settlements obtained with seismic ambient noise techniques near the city of Carnac in French Brittany. Surprisingly, we find that menhirs (neolithic human size standing alone granite stones) with an aspect ratio between 1 and 2 periodically arranged atop a thin layer of sandy soil laid on a granite bedrock, exhibit fundamental resonances in the range of 10 to 25 Hz. We propose an analogic Kelvin-Voigt viscoelastic model that explains the origin of such low frequency resonances. We further explore low frequency filtering effect with full wave finite element simulations. Our numerical results confirm the bending nature of fundamental resonances of the menhirs and further suggest additional resonances of rotational and longitudinal nature in the frequency range 25 to 50 Hz. Our study thus paves the way for large scale seismic metasurfaces consisting of granite stones periodically arranged atop a thin layer of regolith over a bedrock, for ground vibration mitigation in earthquake engineering. △ Less

Submitted 21 June, 2022; originally announced June 2022.

Comments: 6 pages, 7 figures

Two-scale cut-and-projection convergence for quasiperiodic monotone operators

Authors: Niklas Wellander, Sebastien Guenneau, Elena Cherkaev

Abstract: Averaging certain class of quasiperiodic monotone operators can be simplified to the periodic homogenization setting by map** the original quasiperiodic structure onto a periodic structure in a higher dimensional space using cut-and projection method. We characterize cut-and-projection convergence limit of the nonlinear monotone partial differential operator… ▽ More Averaging certain class of quasiperiodic monotone operators can be simplified to the periodic homogenization setting by map** the original quasiperiodic structure onto a periodic structure in a higher dimensional space using cut-and projection method. We characterize cut-and-projection convergence limit of the nonlinear monotone partial differential operator $-\mathrm{div} \; σ\left({\bf x},\frac{{\bf R}{\bf x}}η, \nabla u_η\right)$ for a bounded sequence $u_η$ in $W^{1,p}_0(Ω)$, where $1<p < \infty$, $Ω$ is a bounded open subset in $R^n$ with Lipschitz boundary. We identify the homogenized problem with a local equation defined on the hyperplane in the higher-dimensional space. A new corrector result is established. △ Less

Submitted 8 June, 2022; originally announced June 2022.

Comments: 18 pages

High-Quality Resonances in Quasi-Periodic Clusters of Scatterers for Flexural Waves

Authors: Marc Martí-Sabaté, Sébastien Guenneau, Dani Torrent

Abstract: Multiple scattering theory is applied to the study of clusters of point-like scatterers attached to a thin elastic plate and arranged in quasi-periodic distributions. Two type of structures are specifically considered: the twisted bilayer and the quasi-periodic line. The former consists in a couple of two-dimensional lattices rotated a relative angle, so that the cluster forms a moiré pattern. The… ▽ More Multiple scattering theory is applied to the study of clusters of point-like scatterers attached to a thin elastic plate and arranged in quasi-periodic distributions. Two type of structures are specifically considered: the twisted bilayer and the quasi-periodic line. The former consists in a couple of two-dimensional lattices rotated a relative angle, so that the cluster forms a moiré pattern. The latter can be seen as a periodic one-dimensional lattice where an incommensurate modulation is superimposed. Multiple scattering theory allows for the fast an efficient calculation of the resonant modes of these structures as well as for their quality factor, which is thoroughly analyzed in this work. The results show that quasi-periodic structures present a large density of states with high quality factors, being therefore a promising way for the design of high quality wave-localization devices. △ Less

Submitted 16 May, 2022; originally announced May 2022.

Active exterior cloaking for the 2D Helmholtz equation with complex wavenumbers and application to thermal cloaking

Authors: Maxence Cassier, Trent DeGiovanni, Sébastien Guenneau, Fernando Guevara Vasquez

Abstract: We design sources for the two-dimensional Helmholtz equation that can cloak an object by cancelling out the incident field in a region, without the sources completely surrounding the object to hide. As in previous work for real positive wavenumbers, the sources are also determined by the Green identities. The novelty is that we prove that the same approach works for complex wavenumbers which makes… ▽ More We design sources for the two-dimensional Helmholtz equation that can cloak an object by cancelling out the incident field in a region, without the sources completely surrounding the object to hide. As in previous work for real positive wavenumbers, the sources are also determined by the Green identities. The novelty is that we prove that the same approach works for complex wavenumbers which makes it applicable to a variety of media, including media with dispersion, loss and gain. Furthermore, by deriving bounds on Graf's addition formulas with complex arguments, we obtain new estimates that allow to quantify the quality of the cloaking effect. We illustrate our results by applying them to achieve active exterior cloaking for the heat equation. △ Less

Submitted 3 March, 2022; originally announced March 2022.

Comments: 32 pages, 11 figures

MSC Class: 35J05; 31B10; 35K05; 65M80

Transformation design of in-plane elastic cylindrical cloaks, concentrators and lenses

Authors: Michele Brun, Sebastien Guenneau

Abstract: We analyse the elastic properties of a class of cylindrical cloaks deduced from linear geometric transforms ${\bf x} \to {\bf x}'$ in the framework of the Milton-Briane- Willis cloaking theory [New Journal of Physics 8, 248, 2006]. More precisely, we assume that the map** between displacement fields ${\bf u}({\bf x}) \to {\bf u}'({\bf x}')$ is such that… ▽ More We analyse the elastic properties of a class of cylindrical cloaks deduced from linear geometric transforms ${\bf x} \to {\bf x}'$ in the framework of the Milton-Briane- Willis cloaking theory [New Journal of Physics 8, 248, 2006]. More precisely, we assume that the map** between displacement fields ${\bf u}({\bf x}) \to {\bf u}'({\bf x}')$ is such that ${\bf u}'({\bf x}') = {\bf A}^{-t}{\bf u}({\bf x})$, where ${\bf A}$ is either the transformation gradient $F_{ij} = \partial x'_i/ \partial x_j$ or the second order identity tensor ${\bf I}$. The nature of the cloaks under review can be three-fold: some of them are neutral for a source located a couple of wavelengths away; other lead to either a mirage effect or a field confinement when the source is located inside the concealment region or within their coated region (some act as elastic concentrators squeezing the wavelength of a pressure or shear polarized incident plane wave in their core); a last category of cloaks is classified as an elastic counterpart of electromagnetic perfect cylindrical lenses. The former two categories require either rank-4 elastic tensor and rank-2 density tensor and additional rank-3 and 2 positive definite tensors $({\bf A} = {\bf F})$ or a rank 4 elasticity tensor and a scalar density $({\bf A} = {\bf I})$ with spatially varying positive values. However, the latter example further requires that all rank-4, 3 and 2 tensors be negative definite $({\bf A} = {\bf F})$ or that the elasticity tensor be negative definite (and non fully symmetric) as well as a negative scalar density $({\bf A} = {\bf I})$. We provide some illustrative numerical examples with the Finite Element package Comsol Multiphysics when ${\bf A}$ is the identity. △ Less

Submitted 11 November, 2021; originally announced November 2021.

Cloaking strategy for Love waves

Authors: Z. Chatzopoulos, A. Palermo, S. Guenneau, A. Marzani

Abstract: Love waves are antiplane elastic waves which propagate along the surface of a heterogeneous medium. Under time-harmonic regime, they are governed by a scalar equation of the Helmholtz type. We exploit the invariance of this governing equation under an in-plane arbitrary coordinate transformation to design broadband cloaks for surface defects. In particular, we apply transformation elastodynamics t… ▽ More Love waves are antiplane elastic waves which propagate along the surface of a heterogeneous medium. Under time-harmonic regime, they are governed by a scalar equation of the Helmholtz type. We exploit the invariance of this governing equation under an in-plane arbitrary coordinate transformation to design broadband cloaks for surface defects. In particular, we apply transformation elastodynamics to determine the anisotropic, position dependent, mechanical properties of ideal cloaks able to hide triangular and parabolic-shaped defects. Dispersion analysis and time-harmonic numerical simulations are employed to validate the proposed strategy. Next, we utilize layered monoclinic materials, with homogenized properties matching those of ideal cloaks, to design feasible cloaks. The performance of the layered cloaks is validated via time-harmonic numerical simulations which show a significant reduction of the defect-generated scattered fields. △ Less

Submitted 29 September, 2021; originally announced September 2021.

Time-domain investigation of a cylindrical acoustic external cloak

Authors: Sebastien Guenneau, Bruno Lombard, Cedric Bellis

Abstract: Space folding techniques based on non-monotonic transforms lead to a new class of cylindrical isotropic acoustic cloaks with a constant negative density and a spatially varying negative bulk modulus. We consider an external cloak consisting of a core with a positive definite density matrix and a positive compressibility, and a shell with simultaneously negative density and compressibility. Such a… ▽ More Space folding techniques based on non-monotonic transforms lead to a new class of cylindrical isotropic acoustic cloaks with a constant negative density and a spatially varying negative bulk modulus. We consider an external cloak consisting of a core with a positive definite density matrix and a positive compressibility, and a shell with simultaneously negative density and compressibility. Such a core-shell resonant system creates a virtual folded region outside the shell. To handle such negative physical parameters in the time-domain, a two-step strategy is used: (i) assuming resonant (Drude-type) effective parameters in the frequency-domain; (ii) returning to the time-domain by applying the formalism of the auxiliary fields. We numerically show that, at the designed central frequency, scattering of a cylindrical pressure wave incident upon a finite set of small rigid obstacles is drastically reduced after a lapse of time, when they are placed in the close neighborhood of the external cloak. However, at short times, the external cloak behaves rather like a superscatterer: the cloak itself scatters more than the set of scatterers. △ Less

Submitted 30 December, 2020; originally announced December 2020.

Comments: 5 pages, 6 figures

Acoustic topological circuitry in square and rectangular phononic crystals

Authors: Nicolas Laforge, Richard Wiltshaw, Richard V. Craster, Vincent Laude, Julio Andrés Iglesias Martínez, Guillaume Dupont, Sébastien Guenneau, Muamer Kadic, Mehul P. Makwana

Abstract: We systematically engineer a series of square and rectangular phononic crystals to create experimental realisations of complex topological phononic circuits. The exotic topological transport observed is wholly reliant upon the underlying structure which must belong to either a square or rectangular lattice system and not to any hexagonal-based structure. The phononic system chosen consists of a pe… ▽ More We systematically engineer a series of square and rectangular phononic crystals to create experimental realisations of complex topological phononic circuits. The exotic topological transport observed is wholly reliant upon the underlying structure which must belong to either a square or rectangular lattice system and not to any hexagonal-based structure. The phononic system chosen consists of a periodic array of square steel bars which partitions acoustic waves in water over a broadband range of frequencies (~0.5 MHz). An ultrasonic transducer launches an acoustic pulse which propagates along a domain wall, before encountering a nodal point, from which the acoustic signal partitions towards three exit ports. Numerical simulations are performed to clearly illustrate the highly resolved edge states as well as corroborate our experimental findings. To achieve complete control over the flow of energy, power division and redirection devices are required. The tunability afforded by our designs, in conjunction with the topological robustness of the modes, will result in their assimilation into acoustical devices. △ Less

Submitted 14 December, 2020; originally announced December 2020.

Active Thermal Cloaking and Mimicking

Authors: Maxence Cassier, Trent DeGiovanni, Sébastien Guenneau, Fernando Guevara Vasquez

Abstract: We present an active cloaking method for the parabolic heat (and mass or light diffusion) equation that can hide both objects and sources. By active we mean that it relies on designing monopole and dipole heat source distributions on the boundary of the region to be cloaked. The same technique can be used to make a source or an object look like a different one to an observer outside the cloaked re… ▽ More We present an active cloaking method for the parabolic heat (and mass or light diffusion) equation that can hide both objects and sources. By active we mean that it relies on designing monopole and dipole heat source distributions on the boundary of the region to be cloaked. The same technique can be used to make a source or an object look like a different one to an observer outside the cloaked region, from the perspective of thermal measurements. Our results assume a homogeneous isotropic bulk medium and require knowledge of the source to cloak or mimic, but are in most cases independent of the object to cloak. △ Less

Submitted 25 November, 2020; originally announced November 2020.

Comments: 29 pages,12 figures

MSC Class: 31B10; 35K05; 65M80

Pulse dynamics of flexural waves in transformed plates

Authors: Kun Tang, Chenni Xu, Sebastien Guenneau, Patrick Sebbah

Abstract: Coordinate-transformation-inspired optical devices have been mostly examined in the continuous-wave regime: the performance of an invisibility cloak, which has been demonstrated for monochromatic excitation, %would inevitably is likely to deteriorate for short pulses. Here we investigate pulse dynamics of flexural waves propagating in transformed plates. We propose a practical realization of a wav… ▽ More Coordinate-transformation-inspired optical devices have been mostly examined in the continuous-wave regime: the performance of an invisibility cloak, which has been demonstrated for monochromatic excitation, %would inevitably is likely to deteriorate for short pulses. Here we investigate pulse dynamics of flexural waves propagating in transformed plates. We propose a practical realization of a waveshifter and a rotator for flexural waves based on the coordinate transformation method. Time-resolved measurements reveal how the waveshifter deviates a short pulse from its initial trajectory, with no reflection at the bend and no spatial and temporal distortion of the pulse. Extending our strategy to cylindrical coordinates, we design a wave rotator. We demonstrate experimentally how a pulsed plane wave is twisted inside the rotator, while its wavefront is recovered behind the rotator and the pulse shape is preserved, with no extra time delay. We propose the realization of the dynamical mirage effect, where an obstacle appears oriented in a deceptive direction. △ Less

Submitted 3 February, 2021; v1 submitted 27 August, 2020; originally announced August 2020.

Designing thermal energy harvesting devices with natural materials through optimized microstructures

Authors: Qingxiang Ji, Xueyan Chen, Jun Liang, Vincent Laude, Sébastien Guenneau, Guodong Fang, Muamer Kadic

Abstract: Metamaterial thermal energy devices obtained from transformation optics have recently attracted wide attention due to their vast potential in energy storage, thermal harvesting or heat manipulation. However, these devices usually require inhomogeneous and extreme material parameters which are difficult to realize in large-scale applications. Here, we demonstrate a general process to design thermal… ▽ More Metamaterial thermal energy devices obtained from transformation optics have recently attracted wide attention due to their vast potential in energy storage, thermal harvesting or heat manipulation. However, these devices usually require inhomogeneous and extreme material parameters which are difficult to realize in large-scale applications. Here, we demonstrate a general process to design thermal harvesting devices with available natural materials through optimized composite microstructures. We apply two-scale homogenization theory to obtain effective properties of the microstructures. Optimal Latin hypercube technique, combined with a genetic algorithm, is then implemented on the microstructures to achieve optimized design parameters. The optimized microstructures can accurately approximate the behavior of transformed materials. We design such devices and numerically characterize good thermal-energy harvesting performances. To validate the wide-range application of our approach, we illustrate other types of microstructures that mimic well the constitutive parameters. The approach we propose can be used to design novel thermal harvesting devices available with existing technology, and can also act as a beneficial vehicle to explore other transformation optics enabled designs. △ Less

Submitted 20 July, 2020; originally announced August 2020.

Comments: 9figures

The influence of structure geometry and material on seismic metamaterial performance

Authors: T. Venkatesh Varma, Bogdan Ungureanu, Saikat Sarkar, Richard Craster, Sebastien Guenneau, Stephane Brule

Abstract: Diverting, and controlling, elastic vibrations impacting upon infrastructure is a major challenge for seismic hazard mitigation, and for the reduction of machine noise and vehicle vibration in the urban environment. Seismic metamaterials (SMs), with their inherent ability to manipulate wave propagation, provide a key route for overcoming the technological hurdles involved in this challenge. Engine… ▽ More Diverting, and controlling, elastic vibrations impacting upon infrastructure is a major challenge for seismic hazard mitigation, and for the reduction of machine noise and vehicle vibration in the urban environment. Seismic metamaterials (SMs), with their inherent ability to manipulate wave propagation, provide a key route for overcoming the technological hurdles involved in this challenge. Engineering the structure of the SM serves as a basis to tune and enhance its functionality, and inspired by split rings, swiss-rolls, notch-shaped and labyrinthine designs of elementary cells in electromagnetic and mechanical metamaterials, we investigate altering the structure geometries of SMs with the aim of creating large bandgaps \textcolor{black}{in a subwavelength regime}. We show that square stiff inclusions, perform better in comparison to circular ones, whilst kee** the same filling fraction. En route to enhancing the bandgap, we have also studied the performance of SMs with different constituent materials; we find that steel columns, as inclusions, show large bandgaps, however, the columns are too large for steel to be a feasible material in practical or financial terms. Non-reinforced concrete would be preferable for industry level scaling up of the technology because, concrete is cost-effective, easy to cast directly at the construction site and easy to provide arbitrary geometry of the structure. As a part of this study, we show that concrete columns can also be designed to exhibit bandgaps if we cast them within a soft soil coating surrounding the protected area for various civil structures like a bridge, building, oil pipelines etc. △ Less

Submitted 28 July, 2020; originally announced July 2020.

CPA-Lasing in Thin-Elastic Plates via Exceptional Points

Authors: M. Farhat, P. Y. Chen, S. Guenneau, Y. Wu

Abstract: We present here how a coherent perfect absorber-laser (CPAL) enabled by parity-time ($\mathcal{PT}$)-symmetry breaking may be exploited to build monochromatic amplifying devices for flexural waves. The fourth order partial differential equation governing the propagation of flexural waves leads to four by four transfer matrices, and this results in physical properties of the $\mathcal{PT}$-symmetry… ▽ More We present here how a coherent perfect absorber-laser (CPAL) enabled by parity-time ($\mathcal{PT}$)-symmetry breaking may be exploited to build monochromatic amplifying devices for flexural waves. The fourth order partial differential equation governing the propagation of flexural waves leads to four by four transfer matrices, and this results in physical properties of the $\mathcal{PT}$-symmetry specific to elastic plate systems. We thus demonstrate the possibility of using CPAL for such systems and we argue the possibility of using this concept to detect extremely small-scale vibration perturbations with important outcomes in surface science (imaging of nanometer vibration) and geophysics (improving seismic sensors like velocimeters). The device can also generate finite signals using very low exciting intensities. The system can alternatively be used as a perfect absorber for flexural energy by tailoring the left and right incident wave for energy harvesting applications. △ Less

Submitted 3 July, 2020; originally announced July 2020.

Comments: 6 pages, 3 figures

Journal ref: Phys. Rev. B 103, 134101 (2021)

Hybrid topological guiding mechanisms for photonic crystal fibers

Authors: Mehul P. Makwana, Richard Wiltshaw, Sébastien Guenneau, Richard V. Craster

Abstract: We create hybrid topological-photonic localisation of light by introducing concepts from the field of topological matter to that of photonic crystal fiber arrays. S-polarized obliquely propagating electromagnetic waves are guided by hexagonal, and square, lattice topological systems along an array of infinitely conducting fibers. The theory utilises perfectly periodic arrays that, in frequency spa… ▽ More We create hybrid topological-photonic localisation of light by introducing concepts from the field of topological matter to that of photonic crystal fiber arrays. S-polarized obliquely propagating electromagnetic waves are guided by hexagonal, and square, lattice topological systems along an array of infinitely conducting fibers. The theory utilises perfectly periodic arrays that, in frequency space, have gapped Dirac cones producing band gaps demarcated by pronounced valleys locally imbued with a nonzero local topological quantity. These broken symmetry-induced stop-bands allow for localised guidance of electromagnetic edge-waves along the crystal fiber axis. Finite element simulations, complemented by asymptotic techniques, demonstrate the effectiveness of the proposed designs for localising energy in finite arrays in a robust manner. △ Less

Submitted 25 May, 2020; originally announced May 2020.

On the possibility of seismic rogue waves in very soft soils

Authors: Stephane Brule, Stefan Enoch, Sebastien Guenneau

Abstract: Liquid wave studies have shown that under certain constructive interference conditions, an abnormal size wave could be generated at a specific point. This type of wave, described long ago in the literature, was named 'Draupner Wave' in 1995. It was the first rogue wave, more than ten meters high, to be detected by a measuring instrument, occurring at the Draupner platform in the North Sea off the… ▽ More Liquid wave studies have shown that under certain constructive interference conditions, an abnormal size wave could be generated at a specific point. This type of wave, described long ago in the literature, was named 'Draupner Wave' in 1995. It was the first rogue wave, more than ten meters high, to be detected by a measuring instrument, occurring at the Draupner platform in the North Sea off the coast of Norway. For very soft and thick soils in continental sedimentary basin, with high water content, low shear wave velocity and wave bouncing effects on the edges of the basin, one can question the theoretical existence of such a type of freak waves that may have come unnoticed amongst surface seismic waves. This short communication presents recent observations and the conditions and limits of the analogy between gravity and seismic waves. △ Less

Submitted 13 April, 2020; originally announced April 2020.

Comments: 13 pages, 7 figures

Scattering Cancellation Technique for Acoustic Spinning Objects

Authors: Mohamed Farhat, Sebastien Guenneau, Andrea Alu, Ying Wu

Abstract: The scattering cancellation technique (SCT) has proved to be an effective way to render static objects invisible to electromagnetic and acoustic waves. However, rotating cylindrical or spherical objects possess additional peculiar scattering features that cannot be cancelled by regular SCT-based cloaks. Here, a generalized SCT theory to cloak spinning objects, and hide them from static observers,… ▽ More The scattering cancellation technique (SCT) has proved to be an effective way to render static objects invisible to electromagnetic and acoustic waves. However, rotating cylindrical or spherical objects possess additional peculiar scattering features that cannot be cancelled by regular SCT-based cloaks. Here, a generalized SCT theory to cloak spinning objects, and hide them from static observers, based on rotating shells with different angular velocity is discussed. This concept is analytically and numerically demonstrated in the case of cylinders, showing that generalized SCT operates efficiently in making rotating objects appear static to an external observer. Our proposal extends the realm of SCT, and brings it one step closer to its practical realization that involves moving objects. △ Less

Submitted 3 April, 2020; originally announced April 2020.

Comments: 27 pages, 6 figures

Journal ref: Phys. Rev. B 101, 174111 (2020)

Localising elastic edge waves via the topological rainbow effect

Authors: Bogdan Ungureanu, Mehul P. Makwana, Richard V. Craster, Sebastien Guenneau

Abstract: We combine two different fields, topological physics and graded metamaterials to design a topological metasurface to control and redirect elastic waves. We strategically design a two-dimensional crystalline perforated elastic plate, using a square lattice, %consisting of bore holes, that hosts symmetry-induced topological edge states. By concurrently allowing the elastic substrate to spatially var… ▽ More We combine two different fields, topological physics and graded metamaterials to design a topological metasurface to control and redirect elastic waves. We strategically design a two-dimensional crystalline perforated elastic plate, using a square lattice, %consisting of bore holes, that hosts symmetry-induced topological edge states. By concurrently allowing the elastic substrate to spatially vary in depth, we are able to convert the incident slow wave into a series of robust modes, with differing envelope modulations. This adiabatic transition localises the incoming energy into a concentrated region where it can then be damped or extracted. For larger transitions, different behaviour is observed; the incoming energy propagates along the interface before being partitioned into two disparate chiral beams. This "topological rainbow" effect leverages two main concepts, namely the quantum valley-Hall effect and the rainbow effect usually associated with electromagnetic metamaterials. The topological rainbow effect transcends specific physical systems, hence, the phenomena we describe can be transposed to other wave physics. Due to the directional tunability of the elastic energy by geometry our results have far-reaching implications for applications such as switches, filters and energy-harvesters. △ Less

Submitted 20 November, 2020; v1 submitted 30 March, 2020; originally announced March 2020.

Effective model for elastic waves propagating in a substrate supporting a dense array of plates/beams with flexural resonances

Authors: Jean-Jacques Marigo, Kim Pham, Agnès Maurel, Sébastien Guenneau

Abstract: We consider the effect of an array of plates or beams over a semi-infinite elastic ground on the propagation of elastic waves hitting the interface. The plates/beams are slender bodies with flexural resonances at low frequencies able to perturb significantly the propagation of waves in the ground. An effective model is obtained using asymptotic analysis and homogenization techniques, which can be… ▽ More We consider the effect of an array of plates or beams over a semi-infinite elastic ground on the propagation of elastic waves hitting the interface. The plates/beams are slender bodies with flexural resonances at low frequencies able to perturb significantly the propagation of waves in the ground. An effective model is obtained using asymptotic analysis and homogenization techniques, which can be expressed in terms of the ground alone with effective dynamic (frequency-dependent) boundary conditions of the Robin's type. For an incident plane wave at oblique incidence, the displacement fields and the reflection coefficients are obtained in closed forms and their validity is inspected by comparison with direct numerics in a two-dimensional setting. △ Less

Submitted 15 January, 2020; originally announced January 2020.

Comments: 29 pages, 13 figures

Surface waves from flexural and compressional resonances of beams

Authors: Jean-Jacques Marigo, Kim Pham, Agnès Maurel, Sébastien Guenneau

Abstract: We present a three-dimensional model describing the propagation of elastic waves in a soil substrate supporting an array of cylindrical beams experiencing flexural and compressional resonances. The resulting surface waves are of two types. In the sagittal plane, hybridized Rayleigh waves can propagate except within bandgaps resulting from a complex interplay between flexural and compressional reso… ▽ More We present a three-dimensional model describing the propagation of elastic waves in a soil substrate supporting an array of cylindrical beams experiencing flexural and compressional resonances. The resulting surface waves are of two types. In the sagittal plane, hybridized Rayleigh waves can propagate except within bandgaps resulting from a complex interplay between flexural and compressional resonances. We exhibit a wave decoupled from the hybridized Rayleigh wave which is the elastic analogue of electromagnetic spoof plasmon polaritons. This wave with displacements perpendicular to the sagittal plane is sensitive only to flexural resonances. Similar, yet quantitatively different, physics is demonstrated in a two-dimensional setting involving resonances of plates. △ Less

Submitted 15 January, 2020; originally announced January 2020.

Comments: 5 pages, 5 figures

The role of seismic metamaterials on soil dynamics

Authors: Stephane Brule, Sebastien Guenneau

Abstract: Some properties of electromagnetic metamaterials have been translated, using some wave analogies, to surface seismic wave control in sedimentary soils structured at the meter scale. Two large scale experiments performed in 2012 near the French cities of Grenoble [Brule et al., PRL 112, 133901, 2014] and Lyon [Brule et al., Sci. Rep. 7, 18066, 2017] have confirmed the usefulness of this methodology… ▽ More Some properties of electromagnetic metamaterials have been translated, using some wave analogies, to surface seismic wave control in sedimentary soils structured at the meter scale. Two large scale experiments performed in 2012 near the French cities of Grenoble [Brule et al., PRL 112, 133901, 2014] and Lyon [Brule et al., Sci. Rep. 7, 18066, 2017] have confirmed the usefulness of this methodology and its potential influence on soil-structure interaction. We present here a new perspective on the in-situ experiment near Lyon, which unveils energy corridors in the seismic lens. We further introduce a concept of time-modulated seismic metamaterial underpined by an effective model based on Willis's equations. As a first application, we propose that ambient seismic noise time-modulates structured soils that can be viewed as moving media. In the same spirit, a design of an analogous seismic computer is proposed making use of ambient seismic noise. Seismic signals transmitted between remote seismic computers can help forming an Internet of Things. We further recall that ancient Roman theaters and forests of trees are examples of large scale structures that behave in a way similar to electromagnetic metamaterials: invisibility cloaks and rainbows, respectively. Seismic metamaterials can thus not only be implemented for shielding, lensing and cloaking of potentially deleterious Rayleigh waves, but they also have potential applications in energy harvesting and analogous computations using ambient seismic noise and this opens new vistas in seismic energy harvesting via natural or artificial soil structuring. △ Less

Submitted 30 December, 2019; originally announced December 2019.

Comments: 27 pages, 8 figures

Experimental observations of topologically guided water waves within non-hexagonal structures

Authors: Mehul P. Makwana, Nicolas Laforge, Richard V. Craster, Guillaume Dupont, Sébastien Guenneau, Vincent Laude, Muamer Kadic

Abstract: We investigate symmetry-protected topological water waves within a strategically engineered square lattice system. Thus far, symmetry-protected topological modes in hexagonal systems have primarily been studied in electromagnetism and acoustics, i.e. dispersionless media. Herein, we show experimentally how crucial geometrical properties of square structures allow for topological transport that is… ▽ More We investigate symmetry-protected topological water waves within a strategically engineered square lattice system. Thus far, symmetry-protected topological modes in hexagonal systems have primarily been studied in electromagnetism and acoustics, i.e. dispersionless media. Herein, we show experimentally how crucial geometrical properties of square structures allow for topological transport that is ordinarily forbidden within conventional hexagonal structures. We perform numerical simulations that take into account the inherent dispersion within water waves and devise a topological insulator that supports symmetry-protected transport along the domain walls. Our measurements, viewed with a high-speed camera under stroboscopic illumination, unambiguously demonstrate the valley-locked transport of water waves within a non-hexagonal structure. Due to the tunability of the energy's directionality by geometry, our results could be used for develo** highly-efficient energy harvesters, filters and beam-splitters within dispersive media. △ Less

Submitted 16 May, 2020; v1 submitted 6 December, 2019; originally announced December 2019.

Homogenization of quasiperiodic structures and two-scale cut-and-projection convergence

Authors: Niklas Wellander, Sébastien Guenneau, Elena Cherkaev

Abstract: Quasiperiodic arrangements of the constitutive materials in composites result in effective properties with very unusual electromagnetic and elastic properties. The paper discusses the cut-and-projection method that is used to characterize effective properties of quasiperiodic materials. Characterization of cut-and-projection convergence limits of partial differential operators is presented, and co… ▽ More Quasiperiodic arrangements of the constitutive materials in composites result in effective properties with very unusual electromagnetic and elastic properties. The paper discusses the cut-and-projection method that is used to characterize effective properties of quasiperiodic materials. Characterization of cut-and-projection convergence limits of partial differential operators is presented, and correctors are established. We provide the proofs of the results announced in (Wellander et al., 2018) and give further examples. Applications to problems of interest in physics include electrostatic, elastostatic and quasistatic magnetic cases. △ Less

Submitted 8 November, 2019; originally announced November 2019.

Comments: 28 pages, 2 figures

Report number: (TEAT-7268)/1-29/(2019)

Fresnel drag in space-time modulated metamaterials

Authors: P. A. Huidobro, E. Galiffi, S. Guenneau, R. V. Craster, J. B. Pendry

Abstract: A moving medium drags light along with it as measured by Fizeau and explained by Einstein's theory of special relativity. Here we show that the same effect can be obtained in a situation where there is no physical motion of the medium. Modulations of both the permittivity and permeability, phased in space and time in the form of travelling waves, are the basis of our model. Space-time metamaterial… ▽ More A moving medium drags light along with it as measured by Fizeau and explained by Einstein's theory of special relativity. Here we show that the same effect can be obtained in a situation where there is no physical motion of the medium. Modulations of both the permittivity and permeability, phased in space and time in the form of travelling waves, are the basis of our model. Space-time metamaterials are represented by effective bianisotropic parameters, which can in turn be mapped to a moving homogeneous medium. Hence these metamaterials mimic a relativistic effect without the need for any actual material motion. We discuss how both the permittivity and permeability need to be modulated in order to achieve these effects, and we present an equivalent transmission line model. △ Less

Submitted 16 August, 2019; originally announced August 2019.

Cloaking in-plane elastic waves with swiss rolls

Authors: Younes Achaoui, Andre Diatta, Muamer Kadic, Sebastien Guenneau

Abstract: We propose a design of cylindrical elastic cloak for coupled in-plane shear waves consisting of concentric layers of sub-wavelength resonant stress-free inclusions shaped as swiss-rolls. The scaling factor between inclusions' sizes is according to Pendry's transform. Unlike the hitherto known situations, the present geometric transform starts from a Willis medium and further assumes that displacem… ▽ More We propose a design of cylindrical elastic cloak for coupled in-plane shear waves consisting of concentric layers of sub-wavelength resonant stress-free inclusions shaped as swiss-rolls. The scaling factor between inclusions' sizes is according to Pendry's transform. Unlike the hitherto known situations, the present geometric transform starts from a Willis medium and further assumes that displacement fields ${\bf u}$ in original medium and ${\bf u}'$ in transformed medium remain unaffected (${\bf u}'={\bf u}$), and this breaks the minor-symmetries of the rank-4 and rank-3 tensors in the Willis equation that describes the transformed effective medium. We achieve some cloaking for a shear polarized source at specific, resonant sub-wavelength, frequencies, when it is located near a clamped obstacle surrounded by the structured cloak. Such an effective medium allows for strong Willis coupling [Quan et al., Physical Review Letters {\bf 120}(25), 254301 (2018)], notwithstanding potential chiral elastic effects [Frenzel et al., Science {\bf 358}(6366), 1072 (2017)], and thus mitigates roles of Willis and Cosserat media in the achieved elastodynamic cloaking. △ Less

Submitted 7 August, 2019; originally announced August 2019.

Comments: 7 pages, 3 figures

Wavelet-based Edge Multiscale Finite Element Method for Helmholtz problems in perforated domains

Authors: Shubin Fu, Guanglian Li, Richard Craster, Sebastien Guenneau

Abstract: We introduce a new efficient algorithm for Helmholtz problems in perforated domains with the design of the scheme allowing for possibly large wavenumbers. Our method is based upon the Wavelet-based Edge Multiscale Finite Element Method (WEMsFEM) as proposed recently in [14]. For a regular coarse mesh with mesh size H, we establish O(H) convergence of this algorithm under the resolution assumption,… ▽ More We introduce a new efficient algorithm for Helmholtz problems in perforated domains with the design of the scheme allowing for possibly large wavenumbers. Our method is based upon the Wavelet-based Edge Multiscale Finite Element Method (WEMsFEM) as proposed recently in [14]. For a regular coarse mesh with mesh size H, we establish O(H) convergence of this algorithm under the resolution assumption, and with the level parameter being sufficiently large. The performance of the algorithm is demonstrated by extensive 2-dimensional numerical tests including those motivated by photonic crystals. △ Less

Submitted 20 June, 2019; originally announced June 2019.

Dynamic behavior of mechanical cloaks designed by direct lattice transformation

Authors: Muamer Kadic, Martin Wegener, Andre Nicolet, Frederic Zolla, Sebastien Guenneau, Andre Diatta

Abstract: Steering waves in elastic solids is more demanding than steering waves in electromagnetism or acoustics. As a result, designing material distributions which are the counterpart of optical invisibility cloaks in elasticity poses a major challenge. Waves of all polarizations should be guided around an obstacle to emerge on the downstream side as though no obstacle were there. Recently, we have intro… ▽ More Steering waves in elastic solids is more demanding than steering waves in electromagnetism or acoustics. As a result, designing material distributions which are the counterpart of optical invisibility cloaks in elasticity poses a major challenge. Waves of all polarizations should be guided around an obstacle to emerge on the downstream side as though no obstacle were there. Recently, we have introduced the direct-lattice-transformation approach. This simple and explicit construction procedure led to extremely good cloaking results in the static case. Here, we transfer this approach to the dynamic case, i.e., to elastic waves or phonons. We demonstrate broadband reduction of scattering, with best suppressions exceeding a factor of five when using cubic coordinate transformations instead of linear ones. To reliably and quantitatively test these cloaks efficiency, we use an effective-medium approach. △ Less

Submitted 6 June, 2019; originally announced June 2019.

Comments: 4 figures

Seismic wave shield using cubic arrays of split-ball resonators

Authors: Bogdan Ungureanu, Younes Achaoui, Stephane Brule, Stefan Enoch, Richard Craster, Sebastien Guenneau

Abstract: Metre size inertial resonators located in the ground have been theoretically shown to interact with a seismic wave (attenuation, band gaps) to enable protection of surface structures such as buildings. The challenge for Civil Engineering is to both reduce the size of these resonators and to increase their efficiency. Here we explore steel spheres, connected to a concrete bulk medium, either by a c… ▽ More Metre size inertial resonators located in the ground have been theoretically shown to interact with a seismic wave (attenuation, band gaps) to enable protection of surface structures such as buildings. The challenge for Civil Engineering is to both reduce the size of these resonators and to increase their efficiency. Here we explore steel spheres, connected to a concrete bulk medium, either by a coating of rubber, or rubber and steel ligaments, or air and steel ligaments. We show that for a cubic lattice periodicity of 1 metre, we achieve stop bands in the frequency range 14 to 20 Hz; by splitting spheres in 2 and 8 pieces, we tune down the stop bands frequencies and further increase their bandwidth. We thus demonstrate we are able to provide a variety of inertial resonators with stop bands below 10 Hz i.e., in the frequency range of interest for earthquake engineering. △ Less

Submitted 22 April, 2019; originally announced April 2019.

Acoustic cloaking: geometric transform, homogenization and a genetic algorithm

Authors: Lucas Pomot, Cédric Payan, Marcel Remillieux, Sébastien Guenneau

Abstract: A general process is proposed to experimentally design anisotropic inhomogeneous metamaterials obtained through a change of coordinate in the Helmholtz equation. The method is applied to the case of a cylindrical transformation that allows to perform cloaking. To approximate such complex metamaterials we apply results of the theory of homogenization and combine them with a genetic algorithm. To il… ▽ More A general process is proposed to experimentally design anisotropic inhomogeneous metamaterials obtained through a change of coordinate in the Helmholtz equation. The method is applied to the case of a cylindrical transformation that allows to perform cloaking. To approximate such complex metamaterials we apply results of the theory of homogenization and combine them with a genetic algorithm. To illustrate the power of our approach, we design three types of cloaks composed of isotropic concentric layers structured with three types of perforations: curved rectangles, split rings and crosses. These cloaks have parameters compatible with existing technology and they mimic the behavior of the transformed material. Numerical simulations have been performed to qualitatively and quantitatively study the cloaking efficiency of these metamaterials. △ Less

Submitted 12 April, 2019; originally announced April 2019.

Comments: 34 pages, 12 figures, 5 tables

Role of nanophotonics in the birth of seismic megastructures

Authors: Stéphane Brûlé, Stefan Enoch, Sébastien Guenneau

Abstract: The discovery of photonic crystals thirty years ago, in conjunction with research advances in plasmonics and metamaterials, has inspired the concept of decameter scale metasurfaces, coined seismic metamaterials, for an enhanced control of surface (Love and Rayleigh) and bulk (shear and pressure) elastodynamic waves. The powerful mathematical tools of coordinate transforms, effective medium and Flo… ▽ More The discovery of photonic crystals thirty years ago, in conjunction with research advances in plasmonics and metamaterials, has inspired the concept of decameter scale metasurfaces, coined seismic metamaterials, for an enhanced control of surface (Love and Rayleigh) and bulk (shear and pressure) elastodynamic waves. The powerful mathematical tools of coordinate transforms, effective medium and Floquet-Bloch theories, which have revolutionized nanophotonics, can be translated in the language of civil engineering and geophysics. Experiments on seismic metamaterials made of buried elements in the soil demonstrate that the fore mentioned tools make possible a novel description of complex phenomena of soil-structure interaction during a seismic disturbance. But the concepts are already moving to more futuristic concepts and the same notions developed for structured soils are now used to examine the effects of buildings viewed as above surface resonators in megastructures such as metacities. But this perspective of the future should not make us forget the heritage of the ancient peoples. Indeed, we finally point out the striking similarity between an invisibility cloak design and the architecture of some ancient megastructures as antique Gallo-Roman theaters and amphitheatres. △ Less

Submitted 9 April, 2019; originally announced April 2019.

Comments: 13 pages, 16 figures

The influence of building interactions on seismic and elastic surface waves

Authors: Bogdan Ungureanu, Sébastien Guenneau, Younes Achaoui, Andre Diatta, Mohamed Farhat, Harsha Hutridurga, Richard V Craster, Stefan Enoch, Stéphane Brûlé

Abstract: We outline some recent research advances on the control of elastic waves in thin and thick plates, that have occurred since the large scale experiment [Phys. Rev. Lett. 112, 133901, 2014] that demonstrated significant interaction of surface seismic waves with holes structuring sedimentary soils at the meter scale. We further investigate the seismic wave trajectories in soils structured with buildi… ▽ More We outline some recent research advances on the control of elastic waves in thin and thick plates, that have occurred since the large scale experiment [Phys. Rev. Lett. 112, 133901, 2014] that demonstrated significant interaction of surface seismic waves with holes structuring sedimentary soils at the meter scale. We further investigate the seismic wave trajectories in soils structured with buildings. A significant substitution of soils by inclusions, acting as foundations, raises the question of the effective dynamic properties of these structured soils. Buildings, in the case of perfect elastic conditions for both soil and buildings, are shown to interact and strongly influence elastic surface waves; such site-city seismic interactions were pointed out in [Bulletin of Seismological Society of America 92, 794-811, 2002], and we investigate a variety of scenarios to illustrate the variety of behaviours possible. △ Less

Submitted 8 April, 2019; originally announced April 2019.

Comments: 15 pages, 9 figures

Novel topological beam-splitting in photonic crystals

Authors: Mehul P. Makwana, Richard Craster, Sebastien Guenneau

Abstract: We create a passive wave splitter, created purely by geometry, to engineer three-way beam splitting in electromagnetism in transverse electric polarisation. We do so by considering arrangements of Indium Phosphide dielectric pillars in air, in particular we place several inclusions within a cell that is then extended periodically upon a square lattice. Hexagonal lattice structures more commonly us… ▽ More We create a passive wave splitter, created purely by geometry, to engineer three-way beam splitting in electromagnetism in transverse electric polarisation. We do so by considering arrangements of Indium Phosphide dielectric pillars in air, in particular we place several inclusions within a cell that is then extended periodically upon a square lattice. Hexagonal lattice structures more commonly used in topological valleytronics but, as we discuss, three-way splitting is only possible using a square, or rectangular, lattice. To achieve splitting and transport around a sharp bend we use accidental, and not symmetry-induced, Dirac cones. Within each cell pillars are either arranged around a triangle or square; we demonstrate the mechanism of splitting and why it does not occur for one of the cases. The theory is developed and full scattering simulations demonstrate the effectiveness of the proposed designs. △ Less

Submitted 4 February, 2019; v1 submitted 31 January, 2019; originally announced February 2019.

Scattering theory and cancellation of gravity-flexural waves of floating plates

Authors: Mohamed Farhat, Pai-Yen Chen, Hakan Bagci, Khaled Salama, Sebastien Guenneau

Abstract: We combine theories of scattering for linearized water waves and flexural waves in thin plates to characterize and achieve control of water wave scattering using floating plates. This requires manipulating a sixth-order partial differential equation with appropriate boundary conditions of the velocity potential. Making use of multipole expansions, we reduce the scattering problem to a linear algeb… ▽ More We combine theories of scattering for linearized water waves and flexural waves in thin plates to characterize and achieve control of water wave scattering using floating plates. This requires manipulating a sixth-order partial differential equation with appropriate boundary conditions of the velocity potential. Making use of multipole expansions, we reduce the scattering problem to a linear algebraic system. The response of a floating plate in the quasistatic limit simplifies, considering a distinct behavior for water and flexural waves. Unlike similar studies in electromagnetics and acoustics, scattering of gravity-flexural waves is dominated by the zeroth-order multipole term and this results in non-vanishing scattering cross-section also in the zero-frequency limit. Potential applications lie in floating structures manipulating ocean waves. △ Less

Submitted 1 May, 2019; v1 submitted 28 January, 2019; originally announced January 2019.

Comments: 19 pages, 4 figures

Journal ref: Phys. Rev. B 101, 014307 (2020)

On static chiral Milton-Briane-Willis continuum mechanics

Authors: Muamer Kadic, André Diatta, Tobias Frenzel, Sebastien Guenneau, Martin Wegener

Abstract: Recent static experiments on twist effects in chiral three-dimensional mechanical metamaterials have been discussed in the context of micropolar Eringen continuum mechanics, which is a generalization of Cauchy elasticity. For cubic symmetry, Eringen elasticity comprises nine additional parameters with respect to Cauchy elasticity, of which three directly influence chiral effects. Here, we discuss… ▽ More Recent static experiments on twist effects in chiral three-dimensional mechanical metamaterials have been discussed in the context of micropolar Eringen continuum mechanics, which is a generalization of Cauchy elasticity. For cubic symmetry, Eringen elasticity comprises nine additional parameters with respect to Cauchy elasticity, of which three directly influence chiral effects. Here, we discuss the behavior of the static case of an alternative generalization of Cauchy elasticity, the Milton-Briane-Willis equations. We show that in the homogeneous static cubic case only one additional parameter with respect to Cauchy elasticity results, which directly influences chiral effects. We show that the Milton-Briane-Willis equations qualitatively describe the experimentally observed chiral twist effects, too. We connect the behavior to a characteristic length scale. △ Less

Submitted 7 January, 2019; originally announced January 2019.

Journal ref: Phys. Rev. B 99, 214101 (2019)