-
Accelerated particle beams in a 3D simulation of the quiet Sun. Effects of advanced beam propagation modelling
Authors:
L. Frogner,
B. V. Gudiksen
Abstract:
Charged particles are constantly accelerated to non-thermal energies by the reconnecting magnetic field in the solar atmosphere. Our understanding of the interactions between the particles and their environment can benefit from three-dimensional atmospheric simulations accounting for non-thermal particle beams. In a previous publication, we presented the first results from such a simulation. Howev…
▽ More
Charged particles are constantly accelerated to non-thermal energies by the reconnecting magnetic field in the solar atmosphere. Our understanding of the interactions between the particles and their environment can benefit from three-dimensional atmospheric simulations accounting for non-thermal particle beams. In a previous publication, we presented the first results from such a simulation. However, the original treatment of beam propagation ignores potentially important phenomena. Here, we present a more general beam propagation model incorporating magnetic gradient forces, the return current, acceleration by the ambient electric field, and temperature-dependent collision rates. Neglecting collisional velocity randomisation makes the model sufficiently lightweight to simulate millions of beams. We investigate how each new physical effect changes beam energy transport in a three-dimensional atmosphere. We applied the method of characteristics to the steady-state continuity equation for electron flux to derive ordinary differential equations for the mean evolution of energy, pitch angle, and flux with distance. For each beam, we solved these numerically for a range of initial energies to obtain the evolving flux spectrum, from which we computed the energy deposited into the ambient plasma. Magnetic gradient forces significantly influence the deposition of beam energy. The strong magnetic field convergence leads to a small coronal deposition peak followed by a heavy dip caused by the onset of magnetic mirroring. Mirrored electrons carry away 5 to 10% of the injected beam energy on average. The transition region peak produced by the remaining energetic electrons occurs slightly deeper than in a uniform magnetic field. An initial diverging magnetic field enhances the subsequent impact of mirroring. The other new physical effects are less significant for the studied atmospheric conditions.
△ Less
Submitted 3 January, 2024; v1 submitted 1 November, 2023;
originally announced November 2023.
-
Accelerated particle beams in a 3D simulation of the quiet Sun. Lower atmospheric spectral diagnostics
Authors:
H. Bakke,
L. Frogner,
L. Rouppe van der Voort,
B. V. Gudiksen,
M. Carlsson
Abstract:
Nanoflare heating through small-scale magnetic reconnection events is one of the prime candidates to explain heating of the solar corona. However, direct signatures of nanoflares are difficult to determine, and unambiguous observational evidence is still lacking. Numerical models that include accelerated electrons and can reproduce flaring conditions are essential in understanding how low-energeti…
▽ More
Nanoflare heating through small-scale magnetic reconnection events is one of the prime candidates to explain heating of the solar corona. However, direct signatures of nanoflares are difficult to determine, and unambiguous observational evidence is still lacking. Numerical models that include accelerated electrons and can reproduce flaring conditions are essential in understanding how low-energetic events act as a heating mechanism of the corona, and how such events are able to produce signatures in the spectral lines that can be detected through observations. We investigate the effects of accelerated electrons in synthetic spectra from a 3D radiative magnetohydrodynamics simulation to better understand small-scale heating events and their impact on the solar atmosphere. We synthesised the chromospheric Ca II and Mg II lines and the transition region Si IV resonance lines from a quiet Sun numerical simulation that includes accelerated electrons. We calculated the contribution function to the intensity to better understand how the lines are formed, and what factors are contributing to the detailed shape of the spectral profiles. The synthetic spectra are highly affected by variations in temperature and vertical velocity. Beam heating exceeds conductive heating at the heights where the spectral lines form, indicating that the electrons should contribute to the heating of the lower atmosphere and hence affect the line profiles. However, we find that it is difficult to determine specific signatures from the non-thermal electrons due to the complexity of the atmospheric response to the heating in combination with the relatively low energy output (~1e21 erg/s). Even so, our results contribute to understanding small-scale heating events in the solar atmosphere, and give further guidance to future observations.
△ Less
Submitted 12 June, 2023; v1 submitted 5 June, 2023;
originally announced June 2023.
-
Implementing accelerated particle beams in a 3D simulation of the quiet Sun
Authors:
L. Frogner,
B. V. Gudiksen
Abstract:
Context. The magnetic field in the solar atmosphere continually reconnects and accelerates charged particles to high energies. Simulations of the atmosphere in three dimensions that include the effects of accelerated particles can aid our understanding of the interplay between energetic particle beams and the environment where they emerge and propagate. We presented the first attempt at such a sim…
▽ More
Context. The magnetic field in the solar atmosphere continually reconnects and accelerates charged particles to high energies. Simulations of the atmosphere in three dimensions that include the effects of accelerated particles can aid our understanding of the interplay between energetic particle beams and the environment where they emerge and propagate. We presented the first attempt at such a simulation in a previous paper, emphasising the physical model of particle beams. However, the numerical implementation of this model is not straightforward due to the diverse conditions in the atmosphere and the way we must distribute computation between multiple CPU cores. Aims. Here, we describe and verify our numerical implementation of energy transport by electron beams in a 3D magnetohydrodynamics code parallelised by domain decomposition. Methods. We trace beam trajectories using a Runge-Kutta scheme with adaptive step length control and integrate deposited beam energy along the trajectories with a hybrid analytical and numerical approach. To parallelise this, we coordinate beam transport across subdomains owned by separate processes using a buffering system designed to optimise data flow. Results. Using an ad hoc magnetic field with analytical field lines as a test scenario, we show that our parallel implementation of adaptive tracing efficiently follows a challenging trajectory with high precision. By timing executions of electron beam transport with different numbers of processes, we found that the processes communicate with minimal overhead but that the parallel scalability is still sublinear due to workload imbalance caused by the uneven spatial distribution of beams.
△ Less
Submitted 4 October, 2022;
originally announced October 2022.
-
Chromospheric emission from nanoflare heating in RADYN simulations
Authors:
H. Bakke,
M. Carlsson,
L. Rouppe van der Voort,
B. V. Gudiksen,
V. Polito,
P. Testa,
B. De Pontieu
Abstract:
Heating signatures from small-scale magnetic reconnection events in the solar atmosphere have proven to be difficult to detect through observations. Numerical models that reproduce flaring conditions are essential in the understanding of how nanoflares may act as a heating mechanism of the corona. We study the effects of non-thermal electrons in synthetic spectra from 1D hydrodynamic RADYN simulat…
▽ More
Heating signatures from small-scale magnetic reconnection events in the solar atmosphere have proven to be difficult to detect through observations. Numerical models that reproduce flaring conditions are essential in the understanding of how nanoflares may act as a heating mechanism of the corona. We study the effects of non-thermal electrons in synthetic spectra from 1D hydrodynamic RADYN simulations of nanoflare heated loops to investigate the diagnostic potential of chromospheric emission from small-scale events. The Mg II h and k, Ca II H and K, Ca II 854.2 nm, H-alpha and H-beta chromospheric lines were synthesised from various RADYN models of coronal loops subject to electron beams of nanoflare energies. The contribution function to the line intensity was computed to better understand how the atmospheric response to the non-thermal electrons affects the formation of spectral lines and the detailed shape of their spectral profiles. The spectral line signatures arising from the electron beams highly depend on the density of the loop and the lower cutoff energy of the electrons. Low-energy (5 keV) electrons deposit their energy in the corona and transition region, producing strong plasma flows that cause both redshifts and blueshifts of the chromospheric spectra. Higher-energy (10 and 15 keV) electrons deposit their energy in the lower transition region and chromosphere, resulting in increased emission from local heating. Our results indicate that effects from small-scale events can be observed with ground-based telescopes, expanding the list of possible diagnostics for the presence and properties of nanoflares.
△ Less
Submitted 3 February, 2022; v1 submitted 28 January, 2022;
originally announced January 2022.
-
Accelerated particle beams in a 3D simulation of the quiet Sun
Authors:
L. Frogner,
B. V. Gudiksen,
H. Bakke
Abstract:
Observational and theoretical evidence suggest that beams of accelerated particles are produced in flaring events of all sizes in the solar atmosphere, from X-class flares to nanoflares. Current models of these types of particles in flaring loops assume an isolated 1D atmosphere. A more realistic environment for modelling accelerated particles can be provided by 3D radiative magnetohydrodynamics c…
▽ More
Observational and theoretical evidence suggest that beams of accelerated particles are produced in flaring events of all sizes in the solar atmosphere, from X-class flares to nanoflares. Current models of these types of particles in flaring loops assume an isolated 1D atmosphere. A more realistic environment for modelling accelerated particles can be provided by 3D radiative magnetohydrodynamics codes. Here, we present a simple model for particle acceleration and propagation in the context of a 3D simulation of the quiet solar atmosphere, spanning from the convection zone to the corona. We then examine the additional transport of energy introduced by the particle beams. The locations of particle acceleration associated with magnetic reconnection were identified by detecting changes in magnetic topology. At each location, the parameters of the accelerated particle distribution were estimated from local conditions. The particle distributions were then propagated along the magnetic field, and the energy deposition due to Coulomb collisions with the ambient plasma was computed. We find that particle beams originate in extended acceleration regions that are distributed across the corona. Upon reaching the transition region, they converge and produce strands of intense heating that penetrate the chromosphere. Within these strands, beam heating consistently dominates conductive heating below the bottom of the transition region. This indicates that particle beams qualitatively alter the energy transport even outside of active regions.
△ Less
Submitted 18 September, 2020; v1 submitted 29 May, 2020;
originally announced May 2020.
-
Non-thermal electrons from solar nanoflares
Authors:
Helle Bakke,
Lars Frogner,
Boris Vilhelm Gudiksen
Abstract:
Context. We introduce a model for including accelerated particles in pure magnetohydrodynamics (MHD) simulations of the solar atmosphere. Aims. We show that the method is viable and produces results that enhance the realism of MHD simulations of the solar atmosphere. Methods. The acceleration of high-energy electrons in solar flares is an accepted fact, but is not included in the most advanced 3D…
▽ More
Context. We introduce a model for including accelerated particles in pure magnetohydrodynamics (MHD) simulations of the solar atmosphere. Aims. We show that the method is viable and produces results that enhance the realism of MHD simulations of the solar atmosphere. Methods. The acceleration of high-energy electrons in solar flares is an accepted fact, but is not included in the most advanced 3D simulations of the solar atmosphere. The effect of the acceleration is not known, and here we introduce a simple method to account for the ability of the accelerated electrons to move energy from the reconnection sites and into the dense transition zone and chromosphere. Results. The method was only run for a short time and with low reconnection energies, but this showed that the reconnection process itself changes, and that there is a clear effect on the observables at the impact sites of the accelerated electrons. Further work will investigate the effect on the reconnection sites and the impact sites in detail.
△ Less
Submitted 21 November, 2018;
originally announced November 2018.
-
Investigating 4D Coronal Heating Events In MHD Simulations
Authors:
Charalambos Kanella,
Boris V. Gudiksen
Abstract:
One candidate-model for heating the solar corona is magnetic reconnection that embodies Ohmic dissipation of current sheets. When numerous small-scaled magnetic reconnection occur, then it is possible to heat the corona. Due to the limitations of current instrumentation, nanoflares cannot be resolved. But their importance is evaluated via statistics by finding the power-law index of the energy dis…
▽ More
One candidate-model for heating the solar corona is magnetic reconnection that embodies Ohmic dissipation of current sheets. When numerous small-scaled magnetic reconnection occur, then it is possible to heat the corona. Due to the limitations of current instrumentation, nanoflares cannot be resolved. But their importance is evaluated via statistics by finding the power-law index of the energy distribution. This method is however biased due to technical and physical reasons. We aim to overcome limitations imposed by observations and statistical analysis. This way, we will identify, and study the small scale impulsive events. We employ a three-dimensional magnetohydrodynamic (3D-MHD) simulation using the \bifrost code. We also employ a new technique to identify the evolution of 3D Joule heating events in the corona. Then, we derive parameters describing the heating events in these locations. We report on the identification of heating events. We obtain the distribution of duration, released energy, and volume. We also find weak power-law correlation between these parameters. In addition, we extract information about geometrical parameters of 2D slices of 3D events, and about the evolution of resolved Joule heating compared to the total Joule heating and the magnetic energy in the corona. Even though the energy power index is less than 2, when classifying the energy release into three categories regarding with respect to the energy release (pico-, nano-, and micro-events), we find that nano-events release $82 \ \%$ of the resolved energy. This fraction corresponds to an energy flux larger than the one needed to heat the corona. It seems that the most popular population is the one containing short-lived, with small spatial extend events.
△ Less
Submitted 12 June, 2018;
originally announced June 2018.
-
Disentangling flows in the solar transition region
Authors:
P. Zacharias,
V. H. Hansteen,
J. Leenaarts,
M. Carlsson,
B. V. Gudiksen
Abstract:
The measured average velocities in solar and stellar spectral lines formed at transition region temperatures have been difficult to interpret. However, realistic three-dimensional radiation magnetohydrodynamics (3D rMHD) models of the solar atmosphere are able to reproduce the observed dominant line shifts and may thus hold the key to resolve these issues. Our new 3D rMHD simulations aim to shed l…
▽ More
The measured average velocities in solar and stellar spectral lines formed at transition region temperatures have been difficult to interpret. However, realistic three-dimensional radiation magnetohydrodynamics (3D rMHD) models of the solar atmosphere are able to reproduce the observed dominant line shifts and may thus hold the key to resolve these issues. Our new 3D rMHD simulations aim to shed light on how mass flows between the chromosphere and corona and on how the coronal mass is maintained. Passive tracer particles, so-called corks, allow the tracking of parcels of plasma over time and thus the study of changes in plasma temperature and velocity not only locally, but also in a co-moving frame. By following the trajectories of the corks, we can investigate mass and energy flows and understand the composition of the observed velocities. Our findings show that most of the transition region mass is cooling. The preponderance of transition region redshifts in the model can be explained by the higher percentage of downflowing mass in the lower and middle transition region. The average upflows in the upper transition region can be explained by a combination of both stronger upflows than downflows and a higher percentage of upflowing mass. The most common combination at lower and middle transition region temperatures are corks that are cooling and traveling downward. For these corks, a strong correlation between the pressure gradient along the magnetic field line and the velocity along the magnetic field line has been observed, indicating a formation mechanism that is related to downward propagating pressure disturbances. Corks at upper transition region temperatures are subject to a rather slow and highly variable but continuous heating process.
△ Less
Submitted 20 April, 2018;
originally announced April 2018.
-
Two-dimensional Radiative Magnetohydrodynamic Simulations of Partial Ionization in the Chromosphere. II. Dynamics and Energetics of the Low Solar Atmosphere
Authors:
Juan Martínez-Sykora,
Bart De Pontieu,
Mats Carlsson,
Viggo H. Hansteen,
Daniel Nóbrega-Siverio,
Boris V. Gudiksen
Abstract:
We investigate the effects of interactions between ions and neutrals on the chromosphere and overlying corona using 2.5D radiative MHD simulations with the Bifrost code. We have extended the code capabilities implementing ion-neutral interaction effects using the Generalized Ohm's Law, i.e., we include the Hall term and the ambipolar diffusion (Pedersen dissipation) in the induction equation. Our…
▽ More
We investigate the effects of interactions between ions and neutrals on the chromosphere and overlying corona using 2.5D radiative MHD simulations with the Bifrost code. We have extended the code capabilities implementing ion-neutral interaction effects using the Generalized Ohm's Law, i.e., we include the Hall term and the ambipolar diffusion (Pedersen dissipation) in the induction equation. Our models span from the upper convection zone to the corona, with the photosphere, chromosphere and transition region partially ionized. Our simulations reveal that the interactions between ionized particles and neutral particles have important consequences for the magneto-thermodynamics of these modeled layers: 1) ambipolar diffusion increases the temperature in the chromosphere; 2) sporadically the horizontal magnetic field in the photosphere is diffused into the chromosphere due to the large ambipolar diffusion; 3) ambipolar diffusion concentrates electrical currents leading to more violent jets and reconnection processes, resulting in 3a) the formation of longer and faster spicules, 3b) heating of plasma during the spicule evolution, and 3c) decoupling of the plasma and magnetic field in spicules. Our results indicate that ambipolar diffusion is a critical ingredient for understanding the magneto-thermo-dynamic properties in the chromosphere and transition region. The numerical simulations have been made publicly available, similar to previous Bifrost simulations. This will allow the community to study realistic numerical simulations with a wider range of magnetic field configurations and physics modules than previously possible.
△ Less
Submitted 22 August, 2017;
originally announced August 2017.
-
Identification of coronal heating events in 3D simulations
Authors:
Charalambos Kanella,
Boris V. Gudiksen
Abstract:
The solar coronal heating problem is an open question since 1939. One proposed model for the transport and release of mechanical energy generated in the sub-phorospheric layers and photosphere is the nanoflare model that incorporates Ohmic heating which releases a part of the energy stored in the magnetic field via magnetic reconnection. The problem with the verification of this model is that we c…
▽ More
The solar coronal heating problem is an open question since 1939. One proposed model for the transport and release of mechanical energy generated in the sub-phorospheric layers and photosphere is the nanoflare model that incorporates Ohmic heating which releases a part of the energy stored in the magnetic field via magnetic reconnection. The problem with the verification of this model is that we cannot resolve observationally small scale events. Histograms of observable characteristics of flares, show powerlaw behavior, for both energy release rate, size and total energy. Depending on the powerlaw index of the energy release, nanoflares might be an important candidate for coronal heating; we seek to find that index. In this paper, we employ a numerical 3D-MHD simulation produced by the numerical code Bifrost, and a new technique to identify the 3D heating events at a specific instant. The quantity we explore is the Joule heating, which is explicitly correlated with the magnetic reconnection because depends on the curl of the magnetic field. We are able to identify 4136 events in a volume $24 \times 24 \times 9.5 \ \textrm{Mm}^3$ (i.e. $768 \times 786 \times 331$ grid cells) of a specific snapshot. We find a powerlaw slope of the released energy per second, and two powerlaw slopes of the identified volume. The identified energy events do not represent all the released energy, but of the identified events, the total energy of the largest events dominate the energy release. Most of the energy release happens in the lower corona, while heating drops with height. We find that with a specific identification method that large events can be resolved into smaller ones, but at the expense of the total identified energy releases. The energy release which cannot be identified as an event favours a low energy release mechanism.
△ Less
Submitted 9 March, 2017; v1 submitted 8 March, 2017;
originally announced March 2017.
-
Time Dependent Non-Equilibrium Ionization of Transition Region Lines Observed with IRIS
Authors:
Juan Martinez-Sykora,
Bart De Pontieu,
Viggo H. Hansteen,
Boris V. Gudiksen
Abstract:
The properties of non-statistical equilibrium ionization of silicon and oxygen ions are analyzed in this work. We focus on four solar targets (quiet sun, coronal hole, plage, quiescent active region, AR, and flaring AR) as observed with the Interface Region Imaging Spectrograph (IRIS). IRIS is best suited for this work due to the high cadence (up to 0.5s), high spatial resolution (up to 0.32"), an…
▽ More
The properties of non-statistical equilibrium ionization of silicon and oxygen ions are analyzed in this work. We focus on four solar targets (quiet sun, coronal hole, plage, quiescent active region, AR, and flaring AR) as observed with the Interface Region Imaging Spectrograph (IRIS). IRIS is best suited for this work due to the high cadence (up to 0.5s), high spatial resolution (up to 0.32"), and high signal to noise ratios for O IV and Si IV. We find that the observed intensity ratio between lines of three times ionized silicon and oxygen ions depends on their total intensity and that this correlation varies depending on the region observed (quiet sun, coronal holes, plage or active regions) and on the specific observational objects present (spicules, dynamic loops, jets, micro-flares or umbra). In order to interpret the observations, we compare them with synthetic profiles taken from 2D self-consistent radiative MHD simulations of the solar atmosphere, where the statistical equilibrium or non-equilibrium treatment silicon and oxygen is applied. These synthetic observations show vaguely similar correlations as in the observations, i.e. between the intensity ratios and their intensities, but only in the non-equilibrium case do we find that (some of) the observations can be reproduced. We conclude that these lines are formed out of statistical equilibrium. We use our time-dependent non-equilibrium ionization simulations to describe the physical mechanisms behind these observed properties.
△ Less
Submitted 2 December, 2015;
originally announced December 2015.
-
A publicly available simulation of an enhanced network region of the Sun
Authors:
Mats Carlsson,
Viggo H. Hansteen,
Boris V. Gudiksen,
Jorrit Leenaarts,
Bart De Pontieu
Abstract:
Context. The solar chromosphere is the interface between the solar surface and the solar corona. Modelling of this region is difficult because it represents the transition from optically thick to thin radiation escape, from gas-pressure domination to magnetic-pressure domination, from a neutral to an ionised state, from MHD to plasma physics, and from near-equilibrium (LTE) to non-equilibrium cond…
▽ More
Context. The solar chromosphere is the interface between the solar surface and the solar corona. Modelling of this region is difficult because it represents the transition from optically thick to thin radiation escape, from gas-pressure domination to magnetic-pressure domination, from a neutral to an ionised state, from MHD to plasma physics, and from near-equilibrium (LTE) to non-equilibrium conditions.
Aims. Our aim is to provide the community with realistic simulations of the magnetic solar outer atmosphere. This will enable detailed comparison of existing and upcoming observations with synthetic observables from the simulations, thereby elucidating the complex interactions of magnetic fields and plasma that are crucial for our understanding of the dynamic outer atmosphere.
Methods. We used the radiation magnetohydrodynamics code Bifrost to perform simulations of a computational volume with a magnetic field topology similar to an enhanced network area on the Sun.
Results. The full simulation cubes are made available online. The general properties of the simulation are discussed, and limitations are discussed.
△ Less
Submitted 26 October, 2015;
originally announced October 2015.
-
Structures in the outer solar atmosphere
Authors:
Lyndsay Fletcher,
Peter J. Cargill,
Spiro K. Antiochos,
Boris V. Gudiksen
Abstract:
The structure and dynamics of the outer solar atmosphere are reviewed with emphasis on the role played by the magnetic field. Contemporary observations that focus on high resolution imaging over a range of temperatures, as well as UV, EUV and hard X-ray spectroscopy, demonstrate the presence of a vast range of temporal and spatial scales, mass motions, and particle energies present. By focussing o…
▽ More
The structure and dynamics of the outer solar atmosphere are reviewed with emphasis on the role played by the magnetic field. Contemporary observations that focus on high resolution imaging over a range of temperatures, as well as UV, EUV and hard X-ray spectroscopy, demonstrate the presence of a vast range of temporal and spatial scales, mass motions, and particle energies present. By focussing on recent developments in the chromosphere, corona and solar wind, it is shown that small scale processes, in particular magnetic reconnection, play a central role in determining the large-scale structure and properties of all regions. This coupling of scales is central to understanding the atmosphere, yet poses formidable challenges for theoretical models.
△ Less
Submitted 23 December, 2014;
originally announced December 2014.
-
The stellar atmosphere simulation code Bifrost
Authors:
Boris V. Gudiksen,
Mats Carlsson,
Viggo H. Hansteen,
Wolfgang Hayek,
Jorrit Leenaarts,
Juan Martínez-Sykora
Abstract:
Context: Numerical simulations of stellar convection and photospheres have been developed to the point where detailed shapes of observed spectral lines can be explained. Stellar atmospheres are very complex, and very different physical regimes are present in the convection zone, photosphere, chromosphere, transition region and corona. To understand the details of the atmosphere it is necessary to…
▽ More
Context: Numerical simulations of stellar convection and photospheres have been developed to the point where detailed shapes of observed spectral lines can be explained. Stellar atmospheres are very complex, and very different physical regimes are present in the convection zone, photosphere, chromosphere, transition region and corona. To understand the details of the atmosphere it is necessary to simulate the whole atmosphere since the different layers interact strongly. These physical regimes are very diverse and it takes a highly efficient massively parallel numerical code to solve the associated equations.
Aims: The design, implementation and validation of the massively parallel numerical code Bifrost for simulating stellar atmospheres from the convection zone to the corona.
Methods: The code is subjected to a number of validation tests, among them the Sod shock tube test, the Orzag-Tang colliding shock test, boundary condition tests and tests of how the code treats magnetic field advection, chromospheric radiation, radiative transfer in an isothermal scattering atmosphere, hydrogen ionization and thermal conduction.
Results: Bifrost completes the tests with good results and shows near linear efficiency scaling to thousands of computing cores.
△ Less
Submitted 31 May, 2011;
originally announced May 2011.
-
On the minimum temperature of the quiet solar chromosphere
Authors:
Jorrit Leenaarts,
Mats Carlsson,
Viggo Hansteen,
Boris V. Gudiksen
Abstract:
aims: We aim to provide an estimate of the minimum temperature of the quiet solar chromosphere. methods: We perform a 2D radiation-MHD simulation spanning the upper convection zone to the lower corona. The simulation includes non-LTE radiative transfer and {an equation-of-state that includes non-equilibrium ionization of hydrogen and non-equilibrium H_2 molecule formation}. We analyze the reliabil…
▽ More
aims: We aim to provide an estimate of the minimum temperature of the quiet solar chromosphere. methods: We perform a 2D radiation-MHD simulation spanning the upper convection zone to the lower corona. The simulation includes non-LTE radiative transfer and {an equation-of-state that includes non-equilibrium ionization of hydrogen and non-equilibrium H_2 molecule formation}. We analyze the reliability of the various assumptions made in our model in order to assess the realism of the simulation. results: Our simulation contains pockets of cool gas with down to 1660 K from 1 Mm up to 3.2 Mm height. It overestimates the radiative heating, and contains non-physical heating below 1660 K. Therefore we conclude that cool pockets in the quiet solar chromosphere might have even lower temperatures than in the simulation, provided that there exist areas in the chromosphere without significant magnetic heating. We suggest off-limb molecular spectroscopy to look for such cool pockets and 3D simulations including a local dynamo and a magnetic carpet to investigate Joule heating in the quiet chromosphere.
△ Less
Submitted 27 April, 2011;
originally announced April 2011.
-
Radiative transfer with scattering for domain-decomposed 3D MHD simulations of cool stellar atmospheres
Authors:
W. Hayek,
M. Asplund,
M. Carlsson,
R. Trampedach,
R. Collet,
B. V. Gudiksen,
V. H. Hansteen,
J. Leenaarts
Abstract:
We present the implementation of a radiative transfer solver with coherent scattering in the new BIFROST code for radiative magneto-hydrodynamical (MHD) simulations of stellar surface convection. The code is fully parallelized using MPI domain decomposition, which allows for large grid sizes and improved resolution of hydrodynamical structures. We apply the code to simulate the surface granulation…
▽ More
We present the implementation of a radiative transfer solver with coherent scattering in the new BIFROST code for radiative magneto-hydrodynamical (MHD) simulations of stellar surface convection. The code is fully parallelized using MPI domain decomposition, which allows for large grid sizes and improved resolution of hydrodynamical structures. We apply the code to simulate the surface granulation in a solar-type star, ignoring magnetic fields, and investigate the importance of coherent scattering for the atmospheric structure. A scattering term is added to the radiative transfer equation, requiring an iterative computation of the radiation field. We use a short-characteristics-based Gauss-Seidel acceleration scheme to compute radiative flux divergences for the energy equation. The effects of coherent scattering are tested by comparing the temperature stratification of three 3D time-dependent hydrodynamical atmosphere models of a solar-type star: without scattering, with continuum scattering only, and with both continuum and line scattering. We show that continuum scattering does not have a significant impact on the photospheric temperature structure for a star like the Sun. Including scattering in line-blanketing, however, leads to a decrease of temperatures by about 350\,K below log tau < -4. The effect is opposite to that of 1D hydrostatic models in radiative equilibrium, where scattering reduces the cooling effect of strong LTE lines in the higher layers of the photosphere. Coherent line scattering also changes the temperature distribution in the high atmosphere, where we observe stronger fluctuations compared to a treatment of lines as true absorbers.
△ Less
Submitted 16 July, 2010;
originally announced July 2010.
-
Chromospheric heating and structure as determined from high resolution 3D simulations
Authors:
Mats Carlsson,
Viggo H. Hansteen,
Boris V. Gudiksen
Abstract:
We have performed 3D radiation MHD simulations extending from the convection zone to the corona covering a box 16 Mm$^3$ at 32 km spatial resolution. The simulations show very fine structure in the chromosphere with acoustic shocks interacting with the magnetic field. Magnetic flux concentrations have a temperature lower than the surroundings in the photosphere but higher in the low chromosphere…
▽ More
We have performed 3D radiation MHD simulations extending from the convection zone to the corona covering a box 16 Mm$^3$ at 32 km spatial resolution. The simulations show very fine structure in the chromosphere with acoustic shocks interacting with the magnetic field. Magnetic flux concentrations have a temperature lower than the surroundings in the photosphere but higher in the low chromosphere. The heating is there mostly through ohmic dissipation preferentially at the edges of the flux concentrations. The magnetic field is often wound up around the flux concentrations. When acoustic waves travel up along the field this topology leads to swirling motions seen in chromospheric diagnostic lines such as the calcium infrared triplet.
△ Less
Submitted 10 January, 2010;
originally announced January 2010.
-
Photospheric Motions and Their Effects on the Corona: a Numerical Approach
Authors:
Leandro F. Gomes de Jesus,
Boris V. Gudiksen
Abstract:
We perform a number of numerical simulations of the solar corona with the aim to understand how it responds to different conditions in the photosphere. By changing parameters which govern the motion of the plasma at the photosphere we study the behavior of the corona, in particular, the effects on the current density generated. An MHD code is used to run simulations, using a 20x20x20 Mm^3 box wi…
▽ More
We perform a number of numerical simulations of the solar corona with the aim to understand how it responds to different conditions in the photosphere. By changing parameters which govern the motion of the plasma at the photosphere we study the behavior of the corona, in particular, the effects on the current density generated. An MHD code is used to run simulations, using a 20x20x20 Mm^3 box with time spans ranging from one hundred to several hundreds of minutes. All the experiments show a fast initial increase of the current density, followed by a stabilization around an asymptotic value which depends on the photospheric conditions. These asymptotic average current densities as well as the turn-over points are discussed.
△ Less
Submitted 28 August, 2009;
originally announced August 2009.
-
Forward modeling of stellar coronae: from a 3D MHD model to synthetic EUV spectra
Authors:
H. Peter,
B. V. Gudiksen,
A. Nordlund
Abstract:
A forward model is described in which we synthesize spectra from an ab-initio 3D MHD simulation of an outer stellar atmosphere, where the coronal heating is based on braiding of magnetic flux due to photospheric footpoint motions. We discuss the validity of assumptions such as ionization equilibrium and investigate the applicability of diagnostics like the differential emission measure inversion…
▽ More
A forward model is described in which we synthesize spectra from an ab-initio 3D MHD simulation of an outer stellar atmosphere, where the coronal heating is based on braiding of magnetic flux due to photospheric footpoint motions. We discuss the validity of assumptions such as ionization equilibrium and investigate the applicability of diagnostics like the differential emission measure inversion. We find that the general appearance of the synthesized corona is similar to the solar corona and that, on a statistical basis, integral quantities such as average Doppler shifts or differential emission measures are reproduced remarkably well. The persistent redshifts in the transition region, which have puzzled theorists since their discovery, are explained by this model as caused by the flows induced by the heating through braiding of magnetic flux. While the model corona is only slowly evolving in intensity, as is observed, the amount of structure and variability in Doppler shift is very large. This emphasizes the need for fast coronal spectroscopy, as the dynamical response of the corona to the heating process manifests itself in a comparably slow evolving coronal intensity but rapid changes in Doppler shift.
△ Less
Submitted 16 March, 2005;
originally announced March 2005.
-
Coronal heating through braiding of magnetic field lines
Authors:
H. Peter,
B. V. Gudiksen,
A. Nordlund
Abstract:
Cool stars like our Sun are surrounded by a million degree hot outer atmosphere, the corona. Since more than 60 years the physical nature of the processes heating the corona to temperatures well in excess of those on the stellar surface remain puzzling. Recent progress in observational techniques and numerical modeling now opens a new window to approach this problem. We present the first coronal…
▽ More
Cool stars like our Sun are surrounded by a million degree hot outer atmosphere, the corona. Since more than 60 years the physical nature of the processes heating the corona to temperatures well in excess of those on the stellar surface remain puzzling. Recent progress in observational techniques and numerical modeling now opens a new window to approach this problem. We present the first coronal emission line spectra synthesized from three-dimensional numerical models describing the evolution of the dynamics and energetics as well as of the magnetic field in the corona. In these models the corona is heated through motions on the stellar surface that lead to a braiding of magnetic field lines inducing currents which are finally dissipated. These forward models enable us to synthesize observed properties like (average) emission line Doppler shifts or emission measures in the outer atmosphere, which until now have not been understood theoretically, even though many suggestions have been made in the past. As our model passes these observational tests, we conclude that the flux braiding mechanism is a prime candidate for being the dominant heating process of the magnetically closed corona of the Sun and solar-like stars.
△ Less
Submitted 21 September, 2004;
originally announced September 2004.
-
Dynamo action in M-dwarfs
Authors:
S. B. F. Dorch,
B. V. Gudiksen,
H. -G. Ludwig
Abstract:
Magnetic activity in M-dwarfs present enigmatic questions: On the one hand they have higher field strengths and larger filling factors than the magnetic field on the Sun, on the other hand, they are fully convective and their atmospheres are more neutral, hence they do not have an undershoot layer for magnetic flux storage and as we show here, cannot have small-scale dynamo action in their photo…
▽ More
Magnetic activity in M-dwarfs present enigmatic questions: On the one hand they have higher field strengths and larger filling factors than the magnetic field on the Sun, on the other hand, they are fully convective and their atmospheres are more neutral, hence they do not have an undershoot layer for magnetic flux storage and as we show here, cannot have small-scale dynamo action in their photospheres either. We present a discussion of these facts and propose a new numerical model to investigate M-dwarf magnetism.
△ Less
Submitted 9 September, 2004;
originally announced September 2004.
-
An Ab Initio approach to Solar Coronal Loops
Authors:
B. V. Gudiksen,
Å. Nordlund
Abstract:
Data from recent numerical simulations of the solar corona and transition region are analysed and the magnetic field connection between the low corona and the photosphere is found to be close to that of a potential field. The fieldline to fieldline displacements follow a power law distribution with typical displacements of just a few Mm. Three loops visible in emulated Transition Region And Coro…
▽ More
Data from recent numerical simulations of the solar corona and transition region are analysed and the magnetic field connection between the low corona and the photosphere is found to be close to that of a potential field. The fieldline to fieldline displacements follow a power law distribution with typical displacements of just a few Mm. Three loops visible in emulated Transition Region And Coronal Explorer (TRACE) filters are analysed in detail and found to have significantly different heating rates and distributions thereof, one of them showing a small scale heating event. The dynamical structure is complicated even though all the loops are visible in a single filter along most of their lengths. None of the loops are static, but are in the process of evolving into loops with very different characteristics. Differential Emission Measure (DEM) curves along one of the loops illustrate that DEM curves have to be treated carefully if physical characteristics are to be extracted.
△ Less
Submitted 13 July, 2004;
originally announced July 2004.
-
An Ab Initio Approach to the Solar Coronal Heating Problem
Authors:
B. V. Gudiksen,
Å. Nordlund
Abstract:
We present an ab initio approach to the solar coronal heating problem by modelling a small part of the solar corona in a computational box using a 3D MHD code including realistic physics. The observed solar granular velocity pattern and its amplitude and vorticity power spectra, as reproduced by a weighted Voronoi tessellation method, are used as a boundary condition that generates a Poynting fl…
▽ More
We present an ab initio approach to the solar coronal heating problem by modelling a small part of the solar corona in a computational box using a 3D MHD code including realistic physics. The observed solar granular velocity pattern and its amplitude and vorticity power spectra, as reproduced by a weighted Voronoi tessellation method, are used as a boundary condition that generates a Poynting flux in the presence of a magnetic field. The initial magnetic field is a potential extrapolation of a SOHO/MDI high resolution magnetogram, and a standard stratified atmosphere is used as a thermal initial condition. Except for the chromospheric temperature structure, which is kept fixed, the initial conditions are quickly forgotten because the included Spitzer conductivity and radiative cooling function have typical timescales much shorter than the time span of the simulation. After a short initial start up period, the magnetic field is able to dissipate 3-4 10^6 ergs cm^{-2} s^{-1} in a highly intermittent corona, maintaining an average temperature of $\sim 10^6$ K, at coronal density values for which emulated images of the Transition Region And Coronal Explorer(TRACE) 171 and 195 pass bands reproduce observed photon count rates.
△ Less
Submitted 13 July, 2004;
originally announced July 2004.
-
Bright loops in the solar corona
Authors:
Boris V. Gudiksen,
Aake Nordlund
Abstract:
The heating of the solar corona and the puzzle of the slender high reaching magnetic loops seen in observations from the Transition Region And Coronal Explorer(TRACE) has been investigated through 3D numerical simulations, and found to be caused by the well observed plasma flows in the photosphere displacing the footpoints of magnetic loops in a nearly potential configuration. It is found that e…
▽ More
The heating of the solar corona and the puzzle of the slender high reaching magnetic loops seen in observations from the Transition Region And Coronal Explorer(TRACE) has been investigated through 3D numerical simulations, and found to be caused by the well observed plasma flows in the photosphere displacing the footpoints of magnetic loops in a nearly potential configuration. It is found that even the small convective displacements cause magnetic dissipation sufficient to heat the corona to temperatures of the order of a million Kelvin. The heating is intermittent in both space and time - at any one height and time it spans several orders of magnitude, and localized heating causes transonic flows along field lines, which explains the observed non-hydrostatic equilibrium of loops that are bright in emission measure.
△ Less
Submitted 7 May, 2002; v1 submitted 11 March, 2002;
originally announced March 2002.
-
Flux-loss of buoyant ropes interacting with convective flows
Authors:
S. B. F. Dorch,
B. V. Gudiksen,
W. P. Abbett,
Aa. Nordlund
Abstract:
We present 3-d numerical magneto-hydrodynamic simulations of a buoyant, twisted magnetic flux rope embedded in a stratified, solar-like model convection zone. The flux rope is given an initial twist such that it neither kinks nor fragments during its ascent. Moreover, its magnetic energy content with respect to convection is chosen so that the flux rope retains its basic geometry while being def…
▽ More
We present 3-d numerical magneto-hydrodynamic simulations of a buoyant, twisted magnetic flux rope embedded in a stratified, solar-like model convection zone. The flux rope is given an initial twist such that it neither kinks nor fragments during its ascent. Moreover, its magnetic energy content with respect to convection is chosen so that the flux rope retains its basic geometry while being deflected from a purely vertical ascent by convective flows. The simulations show that magnetic flux is advected away from the core of the flux rope as it interacts with the convection. The results thus support the idea that the amount of toroidal flux stored at or near the bottom of the solar convection zone may currently be underestimated.
△ Less
Submitted 9 October, 2001;
originally announced October 2001.
