-
Euclid: The reduced shear approximation and magnification bias for Stage IV cosmic shear experiments
Authors:
A. C. Deshpande,
T. D. Kitching,
V. F. Cardone,
P. L. Taylor,
S. Casas,
S. Camera,
C. Carbone,
M. Kilbinger,
V. Pettorino,
Z. Sakr,
D. Sapone,
I. Tutusaus,
N. Auricchio,
C. Bodendorf,
D. Bonino,
M. Brescia,
V. Capobianco,
J. Carretero,
M. Castellano,
S. Cavuoti,
R. Cledassou,
G. Congedo,
L. Conversi,
L. Corcione,
M. Cropper
, et al. (47 additional authors not shown)
Abstract:
Stage IV weak lensing experiments will offer more than an order of magnitude leap in precision. We must therefore ensure that our analyses remain accurate in this new era. Accordingly, previously ignored systematic effects must be addressed. In this work, we evaluate the impact of the reduced shear approximation and magnification bias, on the information obtained from the angular power spectrum. T…
▽ More
Stage IV weak lensing experiments will offer more than an order of magnitude leap in precision. We must therefore ensure that our analyses remain accurate in this new era. Accordingly, previously ignored systematic effects must be addressed. In this work, we evaluate the impact of the reduced shear approximation and magnification bias, on the information obtained from the angular power spectrum. To first-order, the statistics of reduced shear, a combination of shear and convergence, are taken to be equal to those of shear. However, this approximation can induce a bias in the cosmological parameters that can no longer be neglected. A separate bias arises from the statistics of shear being altered by the preferential selection of galaxies and the dilution of their surface densities, in high-magnification regions. The corrections for these systematic effects take similar forms, allowing them to be treated together. We calculated the impact of neglecting these effects on the cosmological parameters that would be determined from Euclid, using cosmic shear tomography. To do so, we employed the Fisher matrix formalism, and included the impact of the super-sample covariance. We also demonstrate how the reduced shear correction can be calculated using a lognormal field forward modelling approach. These effects cause significant biases in Omega_m, sigma_8, n_s, Omega_DE, w_0, and w_a of -0.53 sigma, 0.43 sigma, -0.34 sigma, 1.36 sigma, -0.68 sigma, and 1.21 sigma, respectively. We then show that these lensing biases interact with another systematic: the intrinsic alignment of galaxies. Accordingly, we develop the formalism for an intrinsic alignment-enhanced lensing bias correction. Applying this to Euclid, we find that the additional terms introduced by this correction are sub-dominant.
△ Less
Submitted 1 April, 2020; v1 submitted 16 December, 2019;
originally announced December 2019.
-
Euclid preparation: VI. Verifying the Performance of Cosmic Shear Experiments
Authors:
Euclid Collaboration,
P. Paykari,
T. D. Kitching,
H. Hoekstra,
R. Azzollini,
V. F. Cardone,
M. Cropper,
C. A. J. Duncan,
A. Kannawadi,
L. Miller,
H. Aussel,
I. F. Conti,
N. Auricchio,
M. Baldi,
S. Bardelli,
A. Biviano,
D. Bonino,
E. Borsato,
E. Bozzo,
E. Branchini,
S. Brau-Nogue,
M. Brescia,
J. Brinchmann,
C. Burigana,
S. Camera
, et al. (106 additional authors not shown)
Abstract:
Our aim is to quantify the impact of systematic effects on the inference of cosmological parameters from cosmic shear. We present an end-to-end approach that introduces sources of bias in a modelled weak lensing survey on a galaxy-by-galaxy level. Residual biases are propagated through a pipeline from galaxy properties (one end) through to cosmic shear power spectra and cosmological parameter esti…
▽ More
Our aim is to quantify the impact of systematic effects on the inference of cosmological parameters from cosmic shear. We present an end-to-end approach that introduces sources of bias in a modelled weak lensing survey on a galaxy-by-galaxy level. Residual biases are propagated through a pipeline from galaxy properties (one end) through to cosmic shear power spectra and cosmological parameter estimates (the other end), to quantify how imperfect knowledge of the pipeline changes the maximum likelihood values of dark energy parameters. We quantify the impact of an imperfect correction for charge transfer inefficiency (CTI) and modelling uncertainties of the point spread function (PSF) for Euclid, and find that the biases introduced can be corrected to acceptable levels.
△ Less
Submitted 23 October, 2019;
originally announced October 2019.
-
Euclid preparation: VII. Forecast validation for Euclid cosmological probes
Authors:
Euclid Collaboration,
A. Blanchard,
S. Camera,
C. Carbone,
V. F. Cardone,
S. Casas,
S. Clesse,
S. Ilić,
M. Kilbinger,
T. Kitching,
M. Kunz,
F. Lacasa,
E. Linder,
E. Majerotto,
K. Markovič,
M. Martinelli,
V. Pettorino,
A. Pourtsidou,
Z. Sakr,
A. G. Sánchez,
D. Sapone,
I. Tutusaus,
S. Yahia-Cherif,
V. Yankelevich,
S. Andreon
, et al. (129 additional authors not shown)
Abstract:
The Euclid space telescope will measure the shapes and redshifts of galaxies to reconstruct the expansion history of the Universe and the growth of cosmic structures. Estimation of the expected performance of the experiment, in terms of predicted constraints on cosmological parameters, has so far relied on different methodologies and numerical implementations, developed for different observational…
▽ More
The Euclid space telescope will measure the shapes and redshifts of galaxies to reconstruct the expansion history of the Universe and the growth of cosmic structures. Estimation of the expected performance of the experiment, in terms of predicted constraints on cosmological parameters, has so far relied on different methodologies and numerical implementations, developed for different observational probes and for their combination. In this paper we present validated forecasts, that combine both theoretical and observational expertise for different cosmological probes. This is presented to provide the community with reliable numerical codes and methods for Euclid cosmological forecasts. We describe in detail the methodology adopted for Fisher matrix forecasts, applied to galaxy clustering, weak lensing and their combination. We estimate the required accuracy for Euclid forecasts and outline a methodology for their development. We then compare and improve different numerical implementations, reaching uncertainties on the errors of cosmological parameters that are less than the required precision in all cases. Furthermore, we provide details on the validated implementations that can be used by the reader to validate their own codes if required. We present new cosmological forecasts for Euclid. We find that results depend on the specific cosmological model and remaining freedom in each setup, i.e. flat or non-flat spatial cosmologies, or different cuts at nonlinear scales. The validated numerical implementations can now be reliably used for any setup. We present results for an optimistic and a pessimistic choice of such settings. We demonstrate that the impact of cross-correlations is particularly relevant for models beyond a cosmological constant and may allow us to increase the dark energy Figure of Merit by at least a factor of three.
△ Less
Submitted 25 November, 2020; v1 submitted 21 October, 2019;
originally announced October 2019.
-
Euclid: Reconstruction of Weak Lensing mass maps for non-Gaussianity studies
Authors:
S. Pires,
V. Vandenbussche,
V. Kansal,
R. Bender,
D. Bonino,
A. Boucaud,
J. Brinchmann,
V. Capobianco,
J. Carretero,
M. Castellano,
S. Cavuoti,
R. Clédassou,
G. Congedo,
L. Conversi,
L. Corcione,
F. Dubath,
M. Frailis,
E. Franceschi,
M. Fumana,
F. Grupp,
F. Hormuth,
S. Kermiche,
R. Kohley,
B. Kubik,
M. Kunz
, et al. (21 additional authors not shown)
Abstract:
Weak lensing, which is the deflection of light by matter along the line of sight, has proven to be an efficient method for constraining models of structure formation and reveal the nature of dark energy. So far, most weak-lensing studies have focused on the shear field that can be measured directly from the ellipticity of background galaxies. However, within the context of forthcoming full-sky wea…
▽ More
Weak lensing, which is the deflection of light by matter along the line of sight, has proven to be an efficient method for constraining models of structure formation and reveal the nature of dark energy. So far, most weak-lensing studies have focused on the shear field that can be measured directly from the ellipticity of background galaxies. However, within the context of forthcoming full-sky weak-lensing surveys such as Euclid, convergence maps (mass maps) offer an important advantage over shear fields in terms of cosmological exploitation. While it carry the same information, the lensing signal is more compressed in the convergence maps than in the shear field. This simplifies otherwise computationally expensive analyses, for instance, non-Gaussianity studies. However, the inversion of the non-local shear field requires accurate control of systematic effects caused by holes in the data field, field borders, shape noise, and the fact that the shear is not a direct observable (reduced shear). We present the two mass-inversion methods that are included in the official Euclid data-processing pipeline: the standard Kaiser & Squires method (KS), and a new mass-inversion method (KS+) that aims to reduce the information loss during the mass inversion. This new method is based on the KS method and includes corrections for mass-map** systematic effects. The results of the KS+ method are compared to the original implementation of the KS method in its simplest form, using the Euclid Flagship mock galaxy catalogue. In particular, we estimate the quality of the reconstruction by comparing the two-point correlation functions and third- and fourth- order moments obtained from shear and convergence maps, and we analyse each systematic effect independently and simultaneously...
△ Less
Submitted 29 June, 2020; v1 submitted 7 October, 2019;
originally announced October 2019.
-
Euclid preparation: V. Predicted yield of redshift 7<z<9 quasars from the wide survey
Authors:
Euclid Collaboration,
R. Barnett,
S. J. Warren,
D. J. Mortlock,
J. -G. Cuby,
C. Conselice,
P. C. Hewett,
C. J. Willott,
N. Auricchio,
A. Balaguera-Antolínez,
M. Baldi,
S. Bardelli,
F. Bellagamba,
R. Bender,
A. Biviano,
D. Bonino,
E. Bozzo,
E. Branchini,
M. Brescia,
J. Brinchmann,
C. Burigana,
S. Camera,
V. Capobianco,
C. Carbone,
J. Carretero
, et al. (104 additional authors not shown)
Abstract:
We provide predictions of the yield of $7<z<9$ quasars from the Euclid wide survey, updating the calculation presented in the Euclid Red Book in several ways. We account for revisions to the Euclid near-infrared filter wavelengths; we adopt steeper rates of decline of the quasar luminosity function (QLF; $Φ$) with redshift, $Φ\propto10^{k(z-6)}$, $k=-0.72$, and a further steeper rate of decline,…
▽ More
We provide predictions of the yield of $7<z<9$ quasars from the Euclid wide survey, updating the calculation presented in the Euclid Red Book in several ways. We account for revisions to the Euclid near-infrared filter wavelengths; we adopt steeper rates of decline of the quasar luminosity function (QLF; $Φ$) with redshift, $Φ\propto10^{k(z-6)}$, $k=-0.72$, and a further steeper rate of decline, $k=-0.92$; we use better models of the contaminating populations (MLT dwarfs and compact early-type galaxies); and we use an improved Bayesian selection method, compared to the colour cuts used for the Red Book calculation, allowing the identification of fainter quasars, down to $J_{AB}\sim23$. Quasars at $z>8$ may be selected from Euclid $OYJH$ photometry alone, but selection over the redshift interval $7<z<8$ is greatly improved by the addition of $z$-band data from, e.g., Pan-STARRS and LSST. We calculate predicted quasar yields for the assumed values of the rate of decline of the QLF beyond $z=6$. For the case that the decline of the QLF accelerates beyond $z=6$, with $k=-0.92$, Euclid should nevertheless find over 100 quasars with $7.0<z<7.5$, and $\sim25$ quasars beyond the current record of $z=7.5$, including $\sim8$ beyond $z=8.0$. The first Euclid quasars at $z>7.5$ should be found in the DR1 data release, expected in 2024. It will be possible to determine the bright-end slope of the QLF, $7<z<8$, $M_{1450}<-25$, using 8m class telescopes to confirm candidates, but follow-up with JWST or E-ELT will be required to measure the faint-end slope. Contamination of the candidate lists is predicted to be modest even at $J_{AB}\sim23$. The precision with which $k$ can be determined over $7<z<8$ depends on the value of $k$, but assuming $k=-0.72$ it can be measured to a 1 sigma uncertainty of 0.07.
△ Less
Submitted 5 November, 2019; v1 submitted 12 August, 2019;
originally announced August 2019.
-
Testing the near-infrared optical assembly of the space telescope Euclid
Authors:
Christof Bodendorf,
Norbert Geis,
Frank Grupp,
Jennifer Kaminski,
Reinhard Katterloher,
Ralf Bender
Abstract:
Euclid is a space telescope currently developed in the framework of the ESA Cosmic Vision 2015-2025 Program. It addresses fundamental cosmological questions related to dark matter and dark energy. The lens system of one of the two scientific key instruments [a combined near-infrared spectrometer and photometer (NISP)] was designed, built-up and tested at the Max Planck Institute for Extraterrestri…
▽ More
Euclid is a space telescope currently developed in the framework of the ESA Cosmic Vision 2015-2025 Program. It addresses fundamental cosmological questions related to dark matter and dark energy. The lens system of one of the two scientific key instruments [a combined near-infrared spectrometer and photometer (NISP)] was designed, built-up and tested at the Max Planck Institute for Extraterrestrial Physics (MPE). We present the final imaging quality of this diffraction-limited optical assembly with two complementary approaches, namely a point-spread function and a Shack-Hartmann sensor-based wavefront measurement. The tests are performed under space operating conditions within a cryostat. The large field of view of Euclid's wide-angle objective is sampled with a pivot arm, carrying a measurement telescope and the sensors. A sequence of highly accurate movements to several field positions is carried out by a large computer controlled hexapod. Both measurement approaches are compared among one another and with the corresponding simulations. They demonstrate in good agreement a solely diffraction limited optical performance over the entire field of view.
△ Less
Submitted 30 July, 2019;
originally announced July 2019.
-
The MICADO first light imager for the ELT: overview, operation, simulation
Authors:
Richard Davies,
João Alves,
Yann Clénet,
Florian Lang-Bardl,
Harald Nicklas,
Jörg-Uwe Pott,
Roberto Ragazzoni,
Eline Tolstoy,
Paola Amico,
Heiko Anwand-Heerwart,
Santiago Barboza,
Lothar Barl,
Pierre Baudoz,
Ralf Bender,
Naidu Bezawada,
Peter Bizenberger,
Wilfried Boland,
Piercarlo Bonifacio,
Bruno Borgo,
Tristan Buey,
Frédéric Chapron,
Fanny Chemla,
Mathieu Cohen,
Oliver Czoske,
Vincent Deo
, et al. (76 additional authors not shown)
Abstract:
MICADO will enable the ELT to perform diffraction limited near-infrared observations at first light. The instrument's capabilities focus on imaging (including astrometric and high contrast) as well as single object spectroscopy. This contribution looks at how requirements from the observing modes have driven the instrument design and functionality. Using examples from specific science cases, and m…
▽ More
MICADO will enable the ELT to perform diffraction limited near-infrared observations at first light. The instrument's capabilities focus on imaging (including astrometric and high contrast) as well as single object spectroscopy. This contribution looks at how requirements from the observing modes have driven the instrument design and functionality. Using examples from specific science cases, and making use of the data simulation tool, an outline is presented of what we can expect the instrument to achieve.
△ Less
Submitted 26 July, 2018;
originally announced July 2018.
-
WES - Weihai Echelle Spectrograph
Authors:
Dong-Yang Gao,
Hang-Xin Ji,
Chen Cao,
Shao-Ming Hu,
Robert A. Wittenmyer,
Zhong-Wen Hu,
Frank Grupp,
Hanna Kellermann,
Kai Li,
Di-Fu Guo
Abstract:
The Weihai Echelle Spectrograph (WES) is the first fiber-fed echelle spectrograph for astronomical observation in China. It is primarily used for chemical abundance and asteroseismology studies of nearby bright stars, as well as radial velocity detections for exoplanets. The optical design of WES is based on the widely demonstrated and well-established white-pupil concept. We describe the WES in d…
▽ More
The Weihai Echelle Spectrograph (WES) is the first fiber-fed echelle spectrograph for astronomical observation in China. It is primarily used for chemical abundance and asteroseismology studies of nearby bright stars, as well as radial velocity detections for exoplanets. The optical design of WES is based on the widely demonstrated and well-established white-pupil concept. We describe the WES in detail and present some examples of its performance. A single exposure echelle image covers the spectral region 371-1,100 nm in 107 spectral orders over the rectangular CCD. The spectral resolution $R=λ/Δλ$ changes from 40,600 to 57,000 through adjusting the entrance slit width from full to 2.2 pixels sampling at the fiber-exit. The limiting magnitude scales to $V=8$ with a signal-to-noise ratio (SNR) of more than 100 in $V$ for an hour exposure, at the spectral resolution R$\approx$40,000 in the median seeing of 1.7$^{\prime\prime}$ at Weihai Observatory (WHO) for the 1-meter telescope. The radial velocity (RV) measurement accuracy of WES is estimated to be $<$10 m/s in 10 months (302 days) and better than 15 m/s in 4.4 years (1,617 days) in the recent data processing.
△ Less
Submitted 11 November, 2016; v1 submitted 31 October, 2016;
originally announced November 2016.
-
MICADO: first light imager for the E-ELT
Authors:
R. Davies,
J. Schubert,
M. Hartl,
J. Alves,
Y. Clénet,
F. Lang-Bardl,
H. Nicklas,
J. -U. Pott,
R. Ragazzoni,
E. Tolstoy,
T. Agocs,
H. Anwand-Heerwart,
S. Barboza,
P. Baudoz,
R. Bender,
P. Bizenberger,
A. Boccaletti,
W. Boland,
P. Bonifacio,
F. Briegel,
T. Buey,
F. Chapron,
M. Cohen,
O. Czoske,
S. Dreizler
, et al. (59 additional authors not shown)
Abstract:
MICADO will equip the E-ELT with a first light capability for diffraction limited imaging at near-infrared wavelengths. The instrument's observing modes focus on various flavours of imaging, including astrometric, high contrast, and time resolved. There is also a single object spectroscopic mode optimised for wavelength coverage at moderately high resolution. This contribution provides an overview…
▽ More
MICADO will equip the E-ELT with a first light capability for diffraction limited imaging at near-infrared wavelengths. The instrument's observing modes focus on various flavours of imaging, including astrometric, high contrast, and time resolved. There is also a single object spectroscopic mode optimised for wavelength coverage at moderately high resolution. This contribution provides an overview of the key functionality of the instrument, outlining the scientific rationale for its observing modes. The interface between MICADO and the adaptive optics system MAORY that feeds it is summarised. The design of the instrument is discussed, focussing on the optics and mechanisms inside the cryostat, together with a brief overview of the other key sub-systems.
△ Less
Submitted 7 July, 2016;
originally announced July 2016.
-
Systematic NLTE study of the -2.6 < [Fe/H] < 0.2 F and G dwarfs in the solar neighbourhood. I. Stellar atmosphere parameters
Authors:
T. Sitnova,
G. Zhao,
L. Mashonkina,
Y. Q. Chen,
F. Liu,
Yu. Pakhomov,
K. Tan,
M. Bolte,
S. Alexeeva,
F. Grupp,
J. -R. Shi,
H. -W. Zhang
Abstract:
We present atmospheric parameters for 51 nearby FG dwarfs uniformly distributed over the -2.60 < [Fe/H] < +0.20 metallicity range that is suitable for the Galactic chemical evolution research. Lines of iron, Fe I and Fe II, were used to derive a homogeneous set of effective temperatures, surface gravities, iron abundances, and microturbulence velocities. We used high-resolution (R>60000) Shane/Ham…
▽ More
We present atmospheric parameters for 51 nearby FG dwarfs uniformly distributed over the -2.60 < [Fe/H] < +0.20 metallicity range that is suitable for the Galactic chemical evolution research. Lines of iron, Fe I and Fe II, were used to derive a homogeneous set of effective temperatures, surface gravities, iron abundances, and microturbulence velocities. We used high-resolution (R>60000) Shane/Hamilton and CFHT/ESPaDOnS observed spectra and non-local thermodynamic equilibrium (NLTE) line formation for Fe I and Fe II in the classical 1D model atmospheres. The spectroscopic method was tested with the 20 benchmark stars, for which there are multiple measurements of the infrared flux method (IRFM) Teff and their Hipparcos parallax error is < 10%. We found NLTE abundances from lines of Fe I and Fe II to be consistent within 0.06 dex for every benchmark star, when applying a scaling factor of S_H = 0.5 to the Drawinian rates of inelastic Fe+H collisions. The obtained atmospheric parameters were checked for each program star by comparing its position in the log g-Teff plane with the theoretical evolutionary track in the Yi et al. (2004) grid. Our final effective temperatures lie in between the T_IRFM scales of Alonso et al. (1996) and Casagrande et al. (2011), with a mean difference of +46 K and -51 K, respectively. NLTE leads to higher surface gravity compared with that for LTE. The shift in log g is smaller than 0.1 dex for stars with either [Fe/H] > -0.75, or Teff < 5750 K, or log g > 4.20. NLTE analysis is crucial for the VMP turn-off and subgiant stars, for which the shift in log g between NLTE and LTE can be up to 0.5 dex. The obtained atmospheric parameters will be used in the forthcoming papers to determine NLTE abundances of important astrophysical elements from lithium to europium and to improve observational constraints on the chemo-dynamical models of the Galaxy evolution.
△ Less
Submitted 4 June, 2015;
originally announced June 2015.
-
Palladium and silver abundances in stars with [Fe/H] > -2.6
Authors:
Xiaoshu Wu,
Liang Wang,
Jianrong Shi,
Gang Zhao,
Frank Grupp
Abstract:
Palladium (Pd) and silver (Ag) are the key elements for probing the weak component in the rapid neutron-capture process (r-process) of stellar nucleosynthesis. We performed a detailed analysis of the high-resolution and high signal-to-noise ratio near-UV spectra from the archive of HIRES on the Keck telescope, UVES on the VLT, and HDS on the Subaru Telescope, to determine the Pd and Ag abundances…
▽ More
Palladium (Pd) and silver (Ag) are the key elements for probing the weak component in the rapid neutron-capture process (r-process) of stellar nucleosynthesis. We performed a detailed analysis of the high-resolution and high signal-to-noise ratio near-UV spectra from the archive of HIRES on the Keck telescope, UVES on the VLT, and HDS on the Subaru Telescope, to determine the Pd and Ag abundances of 95 stars. This sample covers a wide metallicity range with -2.6 $\lesssim$ [Fe/H] $\lesssim$ +0.1, and most of them are dwarfs. The plane-parallel LTE MAFAGS-OS model atmosphere was adopted, and the spectral synthesis method was used to derive the Pd and Ag abundances from Pd I λ 3404 Å and Ag I λ 3280/3382 Å lines. We found that both elements are enhanced in metal-poor stars, and their ratios to iron show flat trends at -0.6 < [Fe/H] < +0.1. The abundance ratios of [Ag/H] and [Pd/H] are well correlated over the whole abundance range. This implies that Pd and Ag have similar formation mechanisms during the Galactic evolution.
△ Less
Submitted 17 May, 2015;
originally announced May 2015.
-
Calibrating the α parameter of convective efficiency using observed stellar properties
Authors:
X. S. Wu,
S. Alexeeva,
L. Mashonkina,
L. Wang,
G. Zhao,
F. Grupp
Abstract:
Context. Synthetic model atmosphere calculations are still the most commonly used tool when determining precise stellar parameters and stellar chemical compositions. Besides three-dimensional models that consistently solve for hydrodynamic processes, one-dimensional models that use an approximation for convective energy transport play the major role.
Aims. We use modern Balmer-line formation the…
▽ More
Context. Synthetic model atmosphere calculations are still the most commonly used tool when determining precise stellar parameters and stellar chemical compositions. Besides three-dimensional models that consistently solve for hydrodynamic processes, one-dimensional models that use an approximation for convective energy transport play the major role.
Aims. We use modern Balmer-line formation theory as well as spectral energy distribution (SED) measurements for the Sun and Procyon to calibrate the model parameter α that describes the efficiency of convection in our 1D models. Convection was calibrated over a significant range in parameter space, reaching from F-K along the main sequence and sampling the turnoff and giant branch over a wide range of metallicities. This calibration was compared to theoretical evaluations and allowed an accurate modeling of stellar atmospheres.
Methods. We used Balmer-line fitting and SED fits to determine the convective efficiency parameter α. Both methods are sensitive to the structure and temperature stratification of the deeper photosphere.
Results. While SED fits do not allow a precise determination of the convective parameter for the Sun and Procyon, they both favor values significantly higher than 1.0. Balmer-line fitting, which we find to be more sensitive, suggests that the convective efficiency parameter α is $\approx$ 2.0 for the main sequence and quickly decreases to $\approx$ 1.0 for evolved stars. These results are highly consistent with predictions from 3D models. While the values on the main sequence fit predictions very well, measurements suggest that the decrease of convective efficiency as stars evolve to the giant branch is more dramatic than predicted by models.
△ Less
Submitted 7 April, 2015;
originally announced April 2015.
-
CAFE: Calar Alto Fiber-fed Echelle spectrograph
Authors:
J. Aceituno,
S. F. Sanchez,
F. Grupp,
J. Lillo,
M. Hernan-Obispo,
D. Benitez,
L. M. Montoya,
U. Thiele,
S. Pedraz,
D. Barrado,
S. Dreizler,
J. Bean
Abstract:
We present here CAFE, the Calar Alto Fiber-fed Echelle spectrograph, a new instrument built at the Centro Astronomico Hispano Alemán (CAHA). CAFE is a single fiber, high-resolution ($R\sim$70000) spectrograph, covering the wavelength range between 3650-9800Å. It was built on the basis of the common design for Echelle spectrographs. Its main aim is to measure radial velocities of stellar objects up…
▽ More
We present here CAFE, the Calar Alto Fiber-fed Echelle spectrograph, a new instrument built at the Centro Astronomico Hispano Alemán (CAHA). CAFE is a single fiber, high-resolution ($R\sim$70000) spectrograph, covering the wavelength range between 3650-9800Å. It was built on the basis of the common design for Echelle spectrographs. Its main aim is to measure radial velocities of stellar objects up to $V\sim$13-14 mag with a precision as good as a few tens of $m s^{-1}$. To achieve this goal the design was simplified at maximum, removing all possible movable components, the central wavelength is fixed, so the wavelentgth coverage; no filter wheel, one slit and so on, with a particular care taken in the thermal and mechanical stability. The instrument is fully operational and publically accessible at the 2.2m telescope of the Calar Alto Observatory.
In this article we describe (i) the design, summarizing its manufacturing phase; (ii) characterize the main properties of the instrument; (iii) describe the reduction pipeline; and (iv) show the results from the first light and commissioning runs. The preliminar results indicate that the instrument fulfill the specifications and it can achieve the foreseen goals. In particular, they show that the instrument is more efficient than anticipated, reaching a $S/N\sim$20 for a stellar object as faint as $V\sim$14.5 mag in $\sim$2700s integration time. The instrument is a wonderful machine for exoplanetary research (by studying large samples of possible systems cotaining massive planets), galactic dynamics (high precise radial velocities in moving groups or stellar associations) or astrochemistry.
△ Less
Submitted 10 January, 2013;
originally announced January 2013.
-
4MOST - 4-metre Multi-Object Spectroscopic Telescope
Authors:
Roelof S. de Jong,
Olga Bellido-Tirado,
Cristina Chiappini,
Éric Depagne,
Roger Haynes,
Diane Johl,
Olivier Schnurr,
Axel Schwope,
Jakob Walcher,
Frank Dionies,
Dionne Haynes,
Andreas Kelz,
Francisco S. Kitaura,
Georg Lamer,
Ivan Minchev,
Volker Müller,
Sebastián E. Nuza,
Jean-Christophe Olaya,
Tilmann Piffl,
Emil Popow,
Matthias Steinmetz,
Uğur Ural,
Mary Williams,
Roland Winkler,
Lutz Wisotzki
, et al. (60 additional authors not shown)
Abstract:
The 4MOST consortium is currently halfway through a Conceptual Design study for ESO with the aim to develop a wide-field (>3 square degree, goal >5 square degree), high-multiplex (>1500 fibres, goal 3000 fibres) spectroscopic survey facility for an ESO 4m-class telescope (VISTA). 4MOST will run permanently on the telescope to perform a 5 year public survey yielding more than 20 million spectra at…
▽ More
The 4MOST consortium is currently halfway through a Conceptual Design study for ESO with the aim to develop a wide-field (>3 square degree, goal >5 square degree), high-multiplex (>1500 fibres, goal 3000 fibres) spectroscopic survey facility for an ESO 4m-class telescope (VISTA). 4MOST will run permanently on the telescope to perform a 5 year public survey yielding more than 20 million spectra at resolution R~5000 (λ=390-1000 nm) and more than 2 million spectra at R~20,000 (395-456.5 nm & 587-673 nm). The 4MOST design is especially intended to complement three key all-sky, space-based observatories of prime European interest: Gaia, eROSITA and Euclid. Initial design and performance estimates for the wide-field corrector concepts are presented. We consider two fibre positioner concepts, a well-known Phi-Theta system and a new R-Theta concept with a large patrol area. The spectrographs are fixed configuration two-arm spectrographs, with dedicated spectrographs for the high- and low-resolution. A full facility simulator is being developed to guide trade-off decisions regarding the optimal field-of-view, number of fibres needed, and the relative fraction of high-to-low resolution fibres. Mock catalogues with template spectra from seven Design Reference Surveys are simulated to verify the science requirements of 4MOST. The 4MOST consortium aims to deliver the full 4MOST facility by the end of 2018 and start delivering high-level data products for both consortium and ESO community targets a year later with yearly increments.
△ Less
Submitted 28 June, 2012;
originally announced June 2012.
-
Euclid Definition Study Report
Authors:
R. Laureijs,
J. Amiaux,
S. Arduini,
J. -L. Auguères,
J. Brinchmann,
R. Cole,
M. Cropper,
C. Dabin,
L. Duvet,
A. Ealet,
B. Garilli,
P. Gondoin,
L. Guzzo,
J. Hoar,
H. Hoekstra,
R. Holmes,
T. Kitching,
T. Maciaszek,
Y. Mellier,
F. Pasian,
W. Percival,
J. Rhodes,
G. Saavedra Criado,
M. Sauvage,
R. Scaramella
, et al. (194 additional authors not shown)
Abstract:
Euclid is a space-based survey mission from the European Space Agency designed to understand the origin of the Universe's accelerating expansion. It will use cosmological probes to investigate the nature of dark energy, dark matter and gravity by tracking their observational signatures on the geometry of the universe and on the cosmic history of structure formation. The mission is optimised for tw…
▽ More
Euclid is a space-based survey mission from the European Space Agency designed to understand the origin of the Universe's accelerating expansion. It will use cosmological probes to investigate the nature of dark energy, dark matter and gravity by tracking their observational signatures on the geometry of the universe and on the cosmic history of structure formation. The mission is optimised for two independent primary cosmological probes: Weak gravitational Lensing (WL) and Baryonic Acoustic Oscillations (BAO). The Euclid payload consists of a 1.2 m Korsch telescope designed to provide a large field of view. It carries two instruments with a common field-of-view of ~0.54 deg2: the visual imager (VIS) and the near infrared instrument (NISP) which contains a slitless spectrometer and a three bands photometer. The Euclid wide survey will cover 15,000 deg2 of the extragalactic sky and is complemented by two 20 deg2 deep fields. For WL, Euclid measures the shapes of 30-40 resolved galaxies per arcmin2 in one broad visible R+I+Z band (550-920 nm). The photometric redshifts for these galaxies reach a precision of dz/(1+z) < 0.05. They are derived from three additional Euclid NIR bands (Y, J, H in the range 0.92-2.0 micron), complemented by ground based photometry in visible bands derived from public data or through engaged collaborations. The BAO are determined from a spectroscopic survey with a redshift accuracy dz/(1+z) =0.001. The slitless spectrometer, with spectral resolution ~250, predominantly detects Ha emission line galaxies. Euclid is a Medium Class mission of the ESA Cosmic Vision 2015-2025 programme, with a foreseen launch date in 2019. This report (also known as the Euclid Red Book) describes the outcome of the Phase A study.
△ Less
Submitted 14 October, 2011;
originally announced October 2011.
-
A non-LTE study of neutral and singly-ionized iron line spectra in 1D models of the Sun and selected late-type stars
Authors:
L. Mashonkina,
T. Gehren,
J. -R. Shi,
A. J. Korn,
F. Grupp
Abstract:
A comprehensive model atom for Fe with more than 3000 energy levels is presented. As a test and first application of this model atom, Fe abundances are determined for the Sun and five stars with well determined stellar parameters and high-quality observed spectra. Non-LTE leads to systematically depleted total absorption in the Fe I lines and to positive abundance corrections in agreement with the…
▽ More
A comprehensive model atom for Fe with more than 3000 energy levels is presented. As a test and first application of this model atom, Fe abundances are determined for the Sun and five stars with well determined stellar parameters and high-quality observed spectra. Non-LTE leads to systematically depleted total absorption in the Fe I lines and to positive abundance corrections in agreement with the previous studies, however, the magnitude of non-LTE effect is smaller compared to the earlier results. Non-LTE corrections do not exceed 0.1 dex for the solar metallicity and mildly metal-deficient stars, and they vary within 0.21 dex and 0.35 dex in the very metal-poor stars HD 84937 and HD 122563, respectively, depending on the assumed efficiency of collisions with hydrogen atoms. Based on the analysis of the Fe I/Fe II ionization equilibrium in these two stars, we recommend to apply the Drawin formalism in non-LTE studies of Fe with a scaling factor of 0.1. For the Fe II lines, non-LTE corrections do not exceed 0.01 dex in absolute value. The solar non-LTE abundance obtained from 54 Fe I lines is 7.56+-0.09 and the abundance from 18 Fe II lines varies between 7.41+-0.11 and 7.56+-0.05 depending on the source of the gf-values. Thus, gf-values available for the iron lines are not accurate enough to pursue high-accuracy absolute abundance determinations. Lines of Fe I give, on average, a 0.1 dex lower abundance compared to those of Fe II lines for HD 61421 and HD 102870, even when applying a differential analysis relative to the Sun. A disparity between Fe I and Fe II points to problems of stellar atmosphere modelling or/and effective temperature determination.
△ Less
Submitted 24 January, 2011;
originally announced January 2011.
-
Fe I/Fe II ionization equilibrium in cool stars: NLTE versus LTE
Authors:
Lyudmila Mashonkina,
Thomas Gehren,
Jianrong Shi,
Andreas Korn,
Frank Grupp
Abstract:
Non-local thermodynamic equilibrium (NLTE) line formation for neutral and singly-ionized iron is considered through a range of stellar parameters characteristic of cool stars. A comprehensive model atom for Fe I and Fe II is presented. Our NLTE calculations support the earlier conclusions that the statistical equilibrium (SE) of Fe I shows an underpopulation of Fe I terms. However, the inclusion…
▽ More
Non-local thermodynamic equilibrium (NLTE) line formation for neutral and singly-ionized iron is considered through a range of stellar parameters characteristic of cool stars. A comprehensive model atom for Fe I and Fe II is presented. Our NLTE calculations support the earlier conclusions that the statistical equilibrium (SE) of Fe I shows an underpopulation of Fe I terms. However, the inclusion of the predicted high-excitation levels of Fe I in our model atom leads to a substantial decrease in the departures from LTE. As a test and first application of the Fe I/II model atom, iron abundances are determined for the Sun and four selected stars with well determined stellar parameters and high-quality observed spectra. Within the error bars, lines of Fe I and Fe II give consistent abundances for the Sun and two metal-poor stars when inelastic collisions with hydrogen atoms are taken into account in the SE calculations. For the close-to-solar metallicity stars Procyon and $β$ Vir, the difference (Fe II - Fe I) is about 0.1 dex independent of the line formation model, either NLTE or LTE. We evaluate the influence of departures from LTE on Fe abundance and surface gravity determination for cool stars.
△ Less
Submitted 21 October, 2009;
originally announced October 2009.
-
New extended atomic data in cool star model atmospheres - Using Kurucz's new iron data in MAFAGS-OS models
Authors:
F. Grupp,
R. L. Kurucz,
K. Tan
Abstract:
Context. Cool star model atmospheres are a common tool for the investigation of stellar masses, ages and elemental abundance composition. Theoretical atmospheric models strongly depend on the atomic data used when calculating them. Aims. We present the changes in flux and temperature stratification when changing from iron data computed by R.L. Kurucz in the mid 90s to the Kurucz 2009 iron comput…
▽ More
Context. Cool star model atmospheres are a common tool for the investigation of stellar masses, ages and elemental abundance composition. Theoretical atmospheric models strongly depend on the atomic data used when calculating them. Aims. We present the changes in flux and temperature stratification when changing from iron data computed by R.L. Kurucz in the mid 90s to the Kurucz 2009 iron computations. Methods. MAFAGS-OS opacity sampling atmospheres were recomputed with Kurucz 2009 iron atomic data as implemented in the VALD database by Ryabchikova. Temperature stratification and emergent flux distribution of the new version, called MAFAGS-OS9, is compared to the former version and to solar flux measurements. Results. Using the Kurucz line lists converted into the VALD format and new bound-free opacities for Mg i and Al i leads to changes in the solar temperature stratification by not more than 28 K. At the same time, the calculated solar flux distribution shows significantly better agreement between observations and theoretical solar models. These changes in the temperature stratification of the corresponding models are small, but nevertheless of a magnitude that affects stellar parameter determinations and abundance analysis.
△ Less
Submitted 30 June, 2009;
originally announced June 2009.
-
Prototype development of the Integral-Field unit for VIRUS
Authors:
Andreas Kelz,
Svend M. Bauer,
Frank Grupp,
Gary J. Hill,
Emil Popow,
Povilas Palunas,
Martin M. Roth,
Phillip J. MacQueen,
Ute Tripphahn
Abstract:
VIRUS is a planned integral-field instrument for the Hobby-Eberly Telescope (HET). In order to achieve a large field-of-view and high grasp at reasonable costs, the approach is to replicate integral-field units (IFU) and medium sized spectrographs many times. The Astrophysical Institute Potsdam (AIP) contributes to VIRUS with the development and testing of the IFU prototype. This paper describes…
▽ More
VIRUS is a planned integral-field instrument for the Hobby-Eberly Telescope (HET). In order to achieve a large field-of-view and high grasp at reasonable costs, the approach is to replicate integral-field units (IFU) and medium sized spectrographs many times. The Astrophysical Institute Potsdam (AIP) contributes to VIRUS with the development and testing of the IFU prototype. This paper describes the optomechanical design and the manufacture of the fiber-based IFU subsystem. The initial VIRUS development aims to produce a prototype and to measure its performance. Additionally, techniques will be investigated to allow industrial replication of the highly specific fiber-bundle layout. This will be necessary if this technique is to be applied to the next generation of even larger astronomical instrumentation.
△ Less
Submitted 9 June, 2006;
originally announced June 2006.