Showing 1–21 of 21 results for author: Gruner, S M

Ultrafast Radiographic Imaging and Tracking: An overview of instruments, methods, data, and applications

Authors: Zhehui Wang, Andrew F. T. Leong, Angelo Dragone, Arianna E. Gleason, Rafael Ballabriga, Christopher Campbell, Michael Campbell, Samuel J. Clark, Cinzia Da Vià, Dana M. Dattelbaum, Marcel Demarteau, Lorenzo Fabris, Kamel Fezzaa, Eric R. Fossum, Sol M. Gruner, Todd Hufnagel, Xiaolu Ju, Ke Li, Xavier Llopart, Bratislav Lukić, Alexander Rack, Joseph Strehlow, Audrey C. Therrien, Julia Thom-Levy, Feixiang Wang , et al. (3 additional authors not shown)

Abstract: Ultrafast radiographic imaging and tracking (U-RadIT) use state-of-the-art ionizing particle and light sources to experimentally study sub-nanosecond dynamic processes in physics, chemistry, biology, geology, materials science and other fields. These processes, fundamental to nuclear fusion energy, advanced manufacturing, green transportation and others, often involve one mole or more atoms, and t… ▽ More Ultrafast radiographic imaging and tracking (U-RadIT) use state-of-the-art ionizing particle and light sources to experimentally study sub-nanosecond dynamic processes in physics, chemistry, biology, geology, materials science and other fields. These processes, fundamental to nuclear fusion energy, advanced manufacturing, green transportation and others, often involve one mole or more atoms, and thus are challenging to compute by using the first principles of quantum physics or other forward models. One of the central problems in U-RadIT is to optimize information yield through, e.g. high-luminosity X-ray and particle sources, efficient imaging and tracking detectors, novel methods to collect data, and large-bandwidth online and offline data processing, regulated by the underlying physics, statistics, and computing power. We review and highlight recent progress in: a.) Detectors; b.) U-RadIT modalities; c.) Data and algorithms; and d.) Applications. Hardware-centric approaches to U-RadIT optimization are constrained by detector material properties, low signal-to-noise ratio, high cost and long development cycles of critical hardware components such as ASICs. Interpretation of experimental data, including comparisons with forward models, is frequently hindered by sparse measurements, model and measurement uncertainties, and noise. Alternatively, U-RadIT make increasing use of data science and machine learning algorithms, including experimental implementations of compressed sensing. Machine learning and artificial intelligence approaches, refined by physics and materials information, may also contribute significantly to data interpretation, uncertainty quantification, and U-RadIT optimization. △ Less

Submitted 4 September, 2023; v1 submitted 21 August, 2023; originally announced August 2023.

Comments: 52 pages, 32 figures; Overview of ultrafast radiographic imaging and tracking as a part of ULITIMA 2023 conference, Mar. 13-16,2023, Menlo Park, CA, USA

Report number: Los Alamos Report number LA-UR-23-29338

Journal ref: Nuclear Inst. and Methods in Physics Research, A 1057 (2023) 168690

Multi-scale time-resolved electron diffraction: A case study in moiré materials

Authors: C. J. R. Duncan, M. Kaemingk, W. H. Li, M. B. Andorf, A. C. Bartnik, A. Galdi, M. Gordon, C. A. Pennington, I. V. Bazarov, H. J. Zeng, F. Liu, D. Luo, A. Sood, A. M. Lindenberg, M. W. Tate, D. A. Muller, J. Thom-Levy, S. M. Gruner, J. M. Maxson

Abstract: Ultrafast-optical-pump -- structural-probe measurements, including ultrafast electron and x-ray scattering, provide direct experimental access to the fundamental timescales of atomic motion, and are thus foundational techniques for studying matter out of equilibrium. High-performance detectors are needed in scattering experiments to obtain maximum scientific value from every probe particle. We dep… ▽ More Ultrafast-optical-pump -- structural-probe measurements, including ultrafast electron and x-ray scattering, provide direct experimental access to the fundamental timescales of atomic motion, and are thus foundational techniques for studying matter out of equilibrium. High-performance detectors are needed in scattering experiments to obtain maximum scientific value from every probe particle. We deploy a hybrid pixel array direct electron detector to perform ultrafast electron diffraction experiments on a WSe$_2$/MoSe$_2$ 2D heterobilayer, resolving the weak features of diffuse scattering and moiré superlattice structure without saturating the zero order peak. Enabled by the detector's high frame rate, we show that a chop** technique provides diffraction difference images with signal-to-noise at the shot noise limit. Finally, we demonstrate that a fast detector frame rate coupled with a high repetition rate probe can provide continuous time resolution from femtoseconds to seconds, enabling us to perform a scanning ultrafast electron diffraction experiment that maps thermal transport in WSe$_2$/MoSe$_2$ and resolves distinct diffusion mechanisms in space and time. △ Less

Submitted 27 July, 2023; v1 submitted 16 June, 2022; originally announced June 2022.

Comments: Submitted manuscript, 22 pages, 5 figures

Characterization of 128x128 MM-PAD-2.1 ASIC: A Fast Framing Hard X-Ray Detector with High Dynamic Range

Authors: D. Gadkari, K. S. Shanks, H. Hu, H. T. Philipp, M. W. Tate, J. Thom-Levy, S. M. Gruner

Abstract: We characterize a new x-ray Mixed-Mode Pixel Array Detector (MM-PAD-2.1) Application Specific Integrated Circuit (ASIC). Using an integrating pixel front-end with dynamic charge removal architecture, the MM-PAD-2.1 ASIC extends the maximum measurable x-ray signal (in 20 keV photon units) to > 10$^{7}$ x-rays/pixel/frame while maintaining a low read noise across the full dynamic range, all while im… ▽ More We characterize a new x-ray Mixed-Mode Pixel Array Detector (MM-PAD-2.1) Application Specific Integrated Circuit (ASIC). Using an integrating pixel front-end with dynamic charge removal architecture, the MM-PAD-2.1 ASIC extends the maximum measurable x-ray signal (in 20 keV photon units) to > 10$^{7}$ x-rays/pixel/frame while maintaining a low read noise across the full dynamic range, all while imaging continuously at a frame rate of up to 10 kHz. The in-pixel dynamic charge removal mechanism prevents saturation of the input amplifier and proceeds in parallel with signal integration to achieve deadtime-less measurements with incident x-ray rates of > 10$^{10}$ x-rays/pixel/s. The ASIC format consists of 128$\times$128 square pixels each 150 $μ$m on a side and is designed to be 3-side buttable so large arrays can be effectively tiled. Here we use both laboratory x-ray sources and the Cornell High Energy Synchrotron Source (CHESS) to characterize two single ASIC prototype detectors for both low (single x-ray) and high incident flux detection. In the first detector the ASIC was solder bump-bonded to a 500 $μ$m thick Si sensor for efficient detection of x-rays below ~20 keV, whereas the second detector used a 750 $μ$m thick CdTe sensor for x-rays above $\sim$ 20 keV. △ Less

Submitted 16 February, 2022; v1 submitted 30 November, 2021; originally announced December 2021.

Comments: 16 pages, 7 figures Typos removed. Language changes, minor figure changes (figure 1 and figure 4) and additional information added to make the information presented streamlined and clear. Results unchanged

Very-High Dynamic Range, 10,000 frames/second Pixel Array Detector for Electron Microscopy

Authors: Hugh T. Philipp, Mark W. Tate, Katherine S. Shanks, Luigi Mele, Maurice Peemen, Pleun Dona, Reinout Hartong, Gerard van Veen, Yu-Tsun Shao, Zhen Chen, Julia Thom-Levy, David A. Muller, Sol M. Gruner

Abstract: Precision and accuracy of quantitative scanning transmission electron microscopy (STEM) methods such as ptychography, and the map** of electric, magnetic and strain fields depend on the dose. Reasonable acquisition time requires high beam current and the ability to quantitatively detect both large and minute changes in signal. A new hybrid pixel array detector (PAD), the second-generation Electr… ▽ More Precision and accuracy of quantitative scanning transmission electron microscopy (STEM) methods such as ptychography, and the map** of electric, magnetic and strain fields depend on the dose. Reasonable acquisition time requires high beam current and the ability to quantitatively detect both large and minute changes in signal. A new hybrid pixel array detector (PAD), the second-generation Electron Microscope Pixel Array Detector (EMPAD-G2), addresses this challenge by advancing the technology of a previous generation PAD, the EMPAD. The EMPAD-G2 images continuously at a frame-rates up to 10 kHz with a dynamic range that spans from low-noise detection of single electrons to electron beam currents exceeding 180 pA per pixel, even at electron energies of 300 keV. The EMPAD-G2 enables rapid collection of high-quality STEM data that simultaneously contain full diffraction information from unsaturated bright field disks to usable Kikuchi bands and higher-order Laue zones. Test results from 80 to 300 keV are presented, as are first experimental results demonstrating ptychographic reconstructions, strain and polarization maps. We introduce a new information metric, the Maximum Usable Imaging Speed (MUIS), to identify when a detector becomes electron-starved, saturated or its pixel count is mismatched with the beam current. △ Less

Submitted 10 November, 2021; originally announced November 2021.

Transferring Orbital Angular Momentum to an Electron Beam Reveals Toroidal and Chiral Order

Authors: Kayla X. Nguyen, Yi Jiang, Michael C. Cao, Prafull Purohit, Ajay K. Yadav, Pablo García-Fernández, Mark W. Tate, Celesta S. Chang, Pablo Aguado-Puente, Jorge Íñiguez, Fernando Gomez-Ortiz, Sol M. Gruner, Javier Junquera, Lane W. Martin, Ramamoorthy Ramesh, D. A. Muller

Abstract: Orbital angular momentum and torque transfer play central roles in a wide range of magnetic textures and devices including skyrmions and spin-torque electronics(1-4). Analogous topological structures are now also being explored in ferroelectrics, including polarization vortex arrays in ferroelectric/dielectric superlattices(5). Unlike magnetic toroidal order, electric toroidal order does not coupl… ▽ More Orbital angular momentum and torque transfer play central roles in a wide range of magnetic textures and devices including skyrmions and spin-torque electronics(1-4). Analogous topological structures are now also being explored in ferroelectrics, including polarization vortex arrays in ferroelectric/dielectric superlattices(5). Unlike magnetic toroidal order, electric toroidal order does not couple directly to linear external fields. To develop a mechanism that can control switching in polarization vortices, we utilize a high-energy electron beam and show that transverse currents are generated by polar order in the ballistic limit. We find that the presence of an electric toroidal moment in a ferro-rotational phase transfers a measurable torque and orbital angular momentum to the electron beam. Furthermore, we find that the complex polarization patterns, observed in these heterostructures, are microscopically chiral with a non-trivial axial component of the polarization. This chirality opens the door for the coupling of ferroelectric and optical properties. △ Less

Submitted 9 December, 2020; v1 submitted 7 December, 2020; originally announced December 2020.

Characterization of an architecture for front-end pixel binning in an integrating pixel array detector

Authors: D. Gadkari, K. S. Shanks, H. T. Philipp, M. W. Tate, J. Thom-Levy, S. M. Gruner

Abstract: Optimization of an area detector involves compromises between various parameters like frame rate, read noise, dynamic range and pixel size. We have implemented and tested a novel front-end binning design in a photon-integrating hybrid pixel array detector using the MM-PAD-2.0 pixel architecture. In this architecture, the pixels can be optionally binned in a 2$\times$2 pixel configuration using a n… ▽ More Optimization of an area detector involves compromises between various parameters like frame rate, read noise, dynamic range and pixel size. We have implemented and tested a novel front-end binning design in a photon-integrating hybrid pixel array detector using the MM-PAD-2.0 pixel architecture. In this architecture, the pixels can be optionally binned in a 2$\times$2 pixel configuration using a network of switches to selectively direct the output of 4 sensor pixels to a single amplifier input. Doing this allows a trade-off between frame rate and spatial resolution. Tests show that the binned pixels perform well, but with some degradation on performance as compared to an un-binned pixel. The increased parasitic input capacitance does reduce the signal collected per x-ray as well as increases the noise of the pixel. The increase in noise is, however, less than the factor of 2 increase one would observe for binning in post-processing. Spatial scans across the binned pixels show that no measured signal intensity is lost at the inner binning unit boundaries. In the high flux regime, at a 2$\times$2 pixel wide beam spot (FWHM) size, binned mode responds linearly up to a photon flux of ~10$^{7}$ x-rays/s, and performs comparably with un-binned mode up to a photon flux of ~10$^{8}$ x-rays/s. While this study demonstrates a proof of concept for front-end binning in integrating detectors, we also identify changes to this early-stage prototype which can further improve the performance of binning pixel structures. △ Less

Submitted 5 November, 2020; v1 submitted 26 May, 2020; originally announced May 2020.

Comments: Revised manuscript reflecting minor proofreading changes

High dynamic range CdTe mixed-mode pixel array detector (MM-PAD) for kilohertz imaging of hard x-rays

Authors: Hugh T. Philipp, Mark W. Tate, Katherine S. Shanks, Prafull Purohit, Sol M. Gruner

Abstract: A hard x-ray, high-speed, high dynamic range scientific x-ray imager is described. The imager is based on the mixed-mode pixel array detector (MM-PAD) readout chip coupled to a 750 micron thick cadmium telluride (CdTe) sensor. The full imager is a 2 x 3 tiled array of MM-PAD sensor/readout chip hybrids. CdTe improves detection for high energy x-rays as compared to silicon sensors, enabling efficie… ▽ More A hard x-ray, high-speed, high dynamic range scientific x-ray imager is described. The imager is based on the mixed-mode pixel array detector (MM-PAD) readout chip coupled to a 750 micron thick cadmium telluride (CdTe) sensor. The full imager is a 2 x 3 tiled array of MM-PAD sensor/readout chip hybrids. CdTe improves detection for high energy x-rays as compared to silicon sensors, enabling efficient x-ray imaging to extend to >100 keV. The detector is capable of 1 kHz imaging and in-pixel circuitry has been designed to allow for well depths of greater than 4 x 10^{6} 80 keV x-rays. A charge integrating front-end allows for quantitative measurement of high flux x-ray images beyond the capabilities of photon counting detectors. Detector performance is summarized and experimental measurements are presented. △ Less

Submitted 9 June, 2020; v1 submitted 7 April, 2020; originally announced April 2020.

Experimental 3D Coherent Diffractive Imaging from photon-sparse random projections

Authors: K. Giewekemeyer, A. Aquila, N. D. Loh, Y. Chushkin, K. S. Shanks, J. Weiss, M. W. Tate, H. T. Philipp, S. Stern, P. Vagovic, M. Mehrjoo, C. Teo, M. Barthelmess, F. Zontone, C. Chang, R. C. Tiberio, A. Sakdinawat, G. J. Williams, S. M. Gruner, A. P. Mancuso

Abstract: The routine atomic-resolution structure determination of single particles is expected to have profound implications for probing the structure-function relationship in systems ranging from energy materials to biological molecules. Extremely-bright, ultrashort-pulse X-ray sources---X-ray Free Electron Lasers (XFELs)---provide X-rays that can be used to probe ensembles of nearly identical nano-scale… ▽ More The routine atomic-resolution structure determination of single particles is expected to have profound implications for probing the structure-function relationship in systems ranging from energy materials to biological molecules. Extremely-bright, ultrashort-pulse X-ray sources---X-ray Free Electron Lasers (XFELs)---provide X-rays that can be used to probe ensembles of nearly identical nano-scale particles. When combined with coherent diffractive imaging, these objects can be imaged; however, as the resolution of the images approaches the atomic scale, the measured data are increasingly difficult to obtain and, during an X-ray pulse, the number of photons incident on the two-dimensional detector is much smaller than the number of pixels. This latter concern, the signal "sparsity," materially impedes the application of the method. We demonstrate an experimental analog using a synchrotron X-ray source that yields signal levels comparable to those expected from single biomolecules illuminated by focused XFEL pulses. The analog experiment provides an invaluable cross-check on the fidelity of the reconstructed data that is not available during XFEL experiments. We establish---using this experimental data---that a sparsity of order $1.3\times10^{-3}$ photons per pixel per frame can be overcome, lending vital insight to the solution of the atomic-resolution XFEL single particle imaging problem by experimentally demonstrating 3D coherent diffractive imaging from photon-sparse random projections. △ Less

Submitted 14 November, 2018; originally announced November 2018.

Comments: 17 pages, 12 figures

Strain Map** of Two-Dimensional Heterostructures with Sub-Picometer Precision

Authors: Yimo Han, Kayla Nguyen, Michael Cao, Paul Cueva, Saien Xie, Mark W. Tate, Prafull Purohit, Sol M. Gruner, Jiwoong Park, David A. Muller

Abstract: Next-generation, atomically thin devices require in-plane, one-dimensional heterojunctions to electrically connect different two-dimensional (2D) materials. However, the lattice mismatch between most 2D materials leads to unavoidable strain, dislocations, or ripples, which can strongly affect their mechanical, optical, and electronic properties. We have developed an approach to map 2D heterojuncti… ▽ More Next-generation, atomically thin devices require in-plane, one-dimensional heterojunctions to electrically connect different two-dimensional (2D) materials. However, the lattice mismatch between most 2D materials leads to unavoidable strain, dislocations, or ripples, which can strongly affect their mechanical, optical, and electronic properties. We have developed an approach to map 2D heterojunction lattice and strain profiles with sub-picometer precision and to identify dislocations and out-of-plane ripples. We collected diffraction patterns from a focused electron beam for each real-space scan position with a high-speed, high dynamic range, momentum-resolved detector - the electron microscope pixel array detector (EMPAD). The resulting four-dimensional (4D) phase space datasets contain the full spatially resolved lattice information of the sample. By using this technique on tungsten disulfide (WS2) and tungsten diselenide (WSe2) lateral heterostructures, we have mapped lattice distortions with 0.3 pm precision across multi-micron fields of view and simultaneously observed the dislocations and ripples responsible for strain relaxation in 2D laterally-epitaxial structures. △ Less

Submitted 24 January, 2018; originally announced January 2018.

Deep sub-Ångstrom imaging of 2D materials with a high dynamic range detector

Authors: Yi Jiang, Zhen Chen, Yimo Han, Pratiti Deb, Hui Gao, Saien Xie, Prafull Purohit, Mark W. Tate, Jiwoong Park, Sol M. Gruner, Veit Elser, David A. Muller

Abstract: Aberration-corrected optics have made electron microscopy at atomic-resolution a widespread and often essential tool for nanocharacterization. Image resolution is dominated by beam energy and the numerical aperture of the lens (α), with state-of-the-art reaching ~0.47 Å at 300 keV. Two-dimensional materials are imaged at lower beam energies to avoid knock-on damage, limiting spatial resolution to… ▽ More Aberration-corrected optics have made electron microscopy at atomic-resolution a widespread and often essential tool for nanocharacterization. Image resolution is dominated by beam energy and the numerical aperture of the lens (α), with state-of-the-art reaching ~0.47 Å at 300 keV. Two-dimensional materials are imaged at lower beam energies to avoid knock-on damage, limiting spatial resolution to ~1 Å. Here, by combining a new electron microscope pixel array detector with the dynamic range to record the complete distribution of transmitted electrons and full-field ptychography to recover phase information from the full phase space, we increased the spatial resolution well beyond the traditional lens limitations. At 80 keV beam energy, our ptychographic reconstructions significantly improved image contrast of single-atom defects in MoS2, reaching an information limit close to 5α, corresponding to a 0.39 Å Abbe resolution, at the same dose and imaging conditions where conventional imaging modes reach only 0.98 Å. △ Less

Submitted 14 January, 2018; originally announced January 2018.

Journal ref: Nature 559, 343 (2018)

Characterization of Chromium Compensated GaAs as an x-ray Sensor Material for Charge-Integrating Pixel Array Detectors

Authors: Julian Becker, Mark W. Tate, Katherine S. Shanks, Hugh T. Philipp, Joel T. Weiss, Prafull Purohit, Darol Chamberlain, Sol M. Gruner

Abstract: We studied the properties of chromium compensated GaAs when coupled to charge integrating ASICs as a function of detector temperature, applied bias and x-ray tube energy. The material is a photoresistor and can be biased to collect either electrons or holes by the pixel circuitry. Both are studied here. Previous studies have shown substantial hole trap**. This trap** and other sensor propertie… ▽ More We studied the properties of chromium compensated GaAs when coupled to charge integrating ASICs as a function of detector temperature, applied bias and x-ray tube energy. The material is a photoresistor and can be biased to collect either electrons or holes by the pixel circuitry. Both are studied here. Previous studies have shown substantial hole trap**. This trap** and other sensor properties give rise to several non-ideal effects which include an extended point spread function, variations in the effective pixel size, and rate dependent offset shifts. The magnitude of these effects varies with temperature and bias, mandating good temperature uniformity in the sensor and very good temperature stabilization, as well as a carefully selected bias voltage. △ Less

Submitted 21 November, 2017; v1 submitted 7 July, 2017; originally announced July 2017.

Comments: revised version after 2nd peer review

Sub-Microsecond X-Ray Imaging Using Hole-Collecting Schottky type CdTe with Charge-Integrating Pixel Array Detectors

Authors: Julian Becker, Mark W. Tate, Katherine S. Shanks, Hugh T. Philipp, Joel T. Weiss, Prafull Purohit, Darol Chamberlain, Sol M. Gruner

Abstract: CdTe is increasingly being used as the x-ray sensing material in imaging pixel array detectors for x-rays, generally above 20 keV, where silicon sensors become unacceptably transparent. Unfortunately CdTe suffers from polarization, which can alter the response of the material over time and with accumulated dose. Most prior studies used long integration times or CdTe that was not of the hole-collec… ▽ More CdTe is increasingly being used as the x-ray sensing material in imaging pixel array detectors for x-rays, generally above 20 keV, where silicon sensors become unacceptably transparent. Unfortunately CdTe suffers from polarization, which can alter the response of the material over time and with accumulated dose. Most prior studies used long integration times or CdTe that was not of the hole-collecting Schottky type. We investigated the temporal response of hole-collecting Schottky type CdTe sensors on timescales ranging from tens of nanoseconds to several seconds. We found that the material shows signal persistence on the timescale of hundreds of milliseconds attributed to the detrap** of a shallow trap, and additional persistence on sub-microsecond timescales after polarization. The results show that this type of CdTe can be used for time resolved studies down to approximately 100 ns. However quantitative interpretation of the signal requires careful attention to bias voltages, polarization and exposure history. △ Less

Submitted 15 May, 2017; v1 submitted 6 March, 2017; originally announced March 2017.

Comments: revised version after peer-review

High Dynamic Range X-ray Detector Pixel Architectures Utilizing Charge Removal

Authors: Joel T. Weiss, Katherine S. Shanks, Hugh T. Philipp, Julian Becker, Darol Chamberlain, Prafull Purohit, Mark W. Tate, Sol M. Gruner

Abstract: Several charge integrating CMOS pixel front-ends utilizing charge removal techniques have been fabricated to extend dynamic range for x-ray diffraction applications at synchrotron sources and x-ray free electron lasers (XFELs). The pixels described herein build on the Mixed Mode Pixel Array Detector (MM-PAD) framework, developed previously by our group to perform high dynamic range imaging. These… ▽ More Several charge integrating CMOS pixel front-ends utilizing charge removal techniques have been fabricated to extend dynamic range for x-ray diffraction applications at synchrotron sources and x-ray free electron lasers (XFELs). The pixels described herein build on the Mixed Mode Pixel Array Detector (MM-PAD) framework, developed previously by our group to perform high dynamic range imaging. These new pixels boast several orders of magnitude improvement in maximum flux over the MM-PAD, which is capable of measuring a sustained flux in excess of 10$^{8}$ x-rays/pixel/second while maintaining sensitivity to smaller signals, down to single x-rays. To extend dynamic range, charge is removed from the integration node of the front-end amplifier without interrupting integration. The number of times this process occurs is recorded by a digital counter in the pixel. The parameter limiting full well is thereby shifted from the size of an integration capacitor to the depth of a digital counter. The result is similar to that achieved by counting pixel array detectors, but the integrators presented here are designed to tolerate a sustained flux >10$^{11}$ x-rays/pixel/second. Pixel front-end linearity was evaluated by direct current injection and results are presented. A small-scale readout ASIC utilizing these pixel architectures has been fabricated and the use of these architectures to increase single x-ray pulse dynamic range at XFELs is discussed briefly. △ Less

Submitted 28 October, 2016; originally announced October 2016.

Comments: 6 pages, 7 figures

Characterization of CdTe Sensors with Schottky Contacts Coupled to Charge-Integrating Pixel Array Detectors for X-Ray Science

Authors: Julian Becker, Mark W. Tate, Katherine S. Shanks, Hugh T. Philipp, Joel T. Weiss, Prafull Purohit, Darol Chamberlain, Jacob P. C. Ruff, Sol M. Gruner

Abstract: Pixel Array Detectors (PADs) consist of an x-ray sensor layer bonded pixel-by-pixel to an underlying readout chip. This approach allows both the sensor and the custom pixel electronics to be tailored independently to best match the x-ray imaging requirements. Here we present characterizations of CdTe sensors hybridized with two different charge-integrating readout chips, the Keck PAD and the Mixed… ▽ More Pixel Array Detectors (PADs) consist of an x-ray sensor layer bonded pixel-by-pixel to an underlying readout chip. This approach allows both the sensor and the custom pixel electronics to be tailored independently to best match the x-ray imaging requirements. Here we present characterizations of CdTe sensors hybridized with two different charge-integrating readout chips, the Keck PAD and the Mixed-Mode PAD (MM-PAD), both developed previously in our laboratory. The charge-integrating architecture of each of these PADs extends the instantaneous counting rate by many orders of magnitude beyond that obtainable with photon counting architectures. The Keck PAD chip consists of rapid, 8-frame, in-pixel storage elements with framing periods $<$150 ns. The second detector, the MM-PAD, has an extended dynamic range by utilizing an in-pixel overflow counter coupled with charge removal circuitry activated at each overflow. This allows the recording of signals from the single-photon level to tens of millions of x-rays/pixel/frame while framing at 1 kHz. Both detector chips consist of a 128$\times$128 pixel array with (150 $μ$m)$^2$ pixels. △ Less

Submitted 28 November, 2016; v1 submitted 12 September, 2016; originally announced September 2016.

Comments: Revised version after 2nd peer-review

High Dynamic Range Pixel Array Detector for Scanning Transmission Electron Microscopy

Authors: Mark W. Tate, Prafull Purohit, Darol Chamberlain, Kayla X. Nguyen, Robert M. Hovden, Celesta S. Chang, Pratiti Deb, Emrah Turgut, John T. Heron, Darrell G. Schlom, Daniel C. Ralph, Gregory D. Fuchs, Katherine S. Shanks, Hugh T. Philipp, David A. Muller, Sol M. Gruner

Abstract: We describe a hybrid pixel array detector (EMPAD - electron microscope pixel array detector) adapted for use in electron microscope applications, especially as a universal detector for scanning transmission electron microscopy. The 128 x 128 pixel detector consists of a 500 um thick silicon diode array bump-bonded pixel-by-pixel to an application-specific integrated circuit (ASIC). The in-pixel ci… ▽ More We describe a hybrid pixel array detector (EMPAD - electron microscope pixel array detector) adapted for use in electron microscope applications, especially as a universal detector for scanning transmission electron microscopy. The 128 x 128 pixel detector consists of a 500 um thick silicon diode array bump-bonded pixel-by-pixel to an application-specific integrated circuit (ASIC). The in-pixel circuitry provides a 1,000,000:1 dynamic range within a single frame, allowing the direct electron beam to be imaged while still maintaining single electron sensitivity. A 1.1 kHz framing rate enables rapid data collection and minimizes sample drift distortions while scanning. By capturing the entire unsaturated diffraction pattern in scanning mode, one can simultaneously capture bright field, dark field, and phase contrast information, as well as being able to analyze the full scattering distribution, allowing true center of mass imaging. The scattering is recorded on an absolute scale, so that information such as local sample thickness can be directly determined. This paper describes the detector architecture, data acquisition (DAQ) system, and preliminary results from experiments with 80 to 200 keV electron beams. △ Less

Submitted 11 November, 2015; originally announced November 2015.

Comments: 39 pages total, 11 Figures in Microscopy and Microanalysis, 2015

Real-Space x-ray tomographic reconstruction of randomly oriented objects with sparse data frames

Authors: Kartik Ayyer, Hugh T. Philipp, Mark W. Tate, Veit Elser, Sol M. Gruner

Abstract: Schemes for X-ray imaging single protein molecules using new x-ray sources, like x-ray free electron lasers (XFELs), require processing many frames of data that are obtained by taking temporally short snapshots of identical molecules, each with a random and unknown orientation. Due to the small size of the molecules and short exposure times, average signal levels of much less than 1 photon/pixel/f… ▽ More Schemes for X-ray imaging single protein molecules using new x-ray sources, like x-ray free electron lasers (XFELs), require processing many frames of data that are obtained by taking temporally short snapshots of identical molecules, each with a random and unknown orientation. Due to the small size of the molecules and short exposure times, average signal levels of much less than 1 photon/pixel/frame are expected, much too low to be processed using standard methods. One approach to process the data is to use statistical methods developed in the EMC algorithm (Loh & Elser, Phys. Rev. E, 2009) which processes the data set as a whole. In this paper we apply this method to a real-space tomographic reconstruction using sparse frames of data (below $10^{-2}$ photons/pixel/frame) obtained by performing x-ray transmission measurements of a low-contrast, randomly-oriented object. This extends the work by Philipp et al. (Optics Express, 2012) to three dimensions and is one step closer to the single molecule reconstruction problem. △ Less

Submitted 7 November, 2013; originally announced November 2013.

Comments: 10 pages, 5 figures

Solving Structure with Sparse, Randomly-Oriented X-ray Data

Authors: Hugh T. Philipp, Kartik Ayyer, Mark W. Tate, Veit Elser, Sol M. Gruner

Abstract: Single-particle imaging experiments of biomolecules at x-ray free-electron lasers (XFELs) require processing of hundreds of thousands (or more) of images that contain very few x-rays. Each low-flux image of the diffraction pattern is produced by a single, randomly oriented particle, such as a protein. We demonstrate the feasibility of collecting data at these extremes, averaging only 2.5 photons p… ▽ More Single-particle imaging experiments of biomolecules at x-ray free-electron lasers (XFELs) require processing of hundreds of thousands (or more) of images that contain very few x-rays. Each low-flux image of the diffraction pattern is produced by a single, randomly oriented particle, such as a protein. We demonstrate the feasibility of collecting data at these extremes, averaging only 2.5 photons per frame, where it seems doubtful there could be information about the state of rotation, let alone the image contrast. This is accomplished with an expectation maximization algorithm that processes the low-flux data in aggregate, and without any prior knowledge of the object or its orientation. The versatility of the method promises, more generally, to redefine what measurement scenarios can provide useful signal in the high-noise regime. △ Less

Submitted 15 March, 2012; originally announced March 2012.

X-ray analog pixel array detector for single synchrotron bunch time-resolved imaging

Authors: Lucas J. Koerner, Sol M. Gruner

Abstract: Dynamic x-ray studies may reach temporal resolutions limited by only the x-ray pulse duration if the detector is fast enough to segregate synchrotron pulses. An analog integrating pixel array detector with in-pixel storage and temporal resolution of around 150 ns, sufficient to isolate pulses, is presented. Analog integration minimizes count-rate limitations and in-pixel storage captures successiv… ▽ More Dynamic x-ray studies may reach temporal resolutions limited by only the x-ray pulse duration if the detector is fast enough to segregate synchrotron pulses. An analog integrating pixel array detector with in-pixel storage and temporal resolution of around 150 ns, sufficient to isolate pulses, is presented. Analog integration minimizes count-rate limitations and in-pixel storage captures successive pulses. Fundamental tests of noise and linearity as well as high-speed laser measurements are shown. The detector resolved individual bunch trains at the Cornell High Energy Synchrotron Source (CHESS) at levels of up to 3.7x10^3 x-rays/pixel/train. When applied to turn-by-turn x-ray beam characterization single-shot intensity measurements were made with a repeatability of 0.4% and horizontal oscillations of the positron cloud were detected. This device is appropriate for time-resolved Bragg spot single crystal experiments. △ Less

Submitted 26 July, 2010; originally announced July 2010.

Comments: 9 pages, 11 figures

Imaging density disturbances in water with 41.3 attosecond time resolution

Authors: P. Abbamonte, K. D. Finkelstein, M. D. Collins, S. M. Gruner

Abstract: We show that the momentum flexibility of inelastic x-ray scattering may be exploited to invert its loss function, alowing real time imaging of density disturbances in a medium. We show the disturbance arising from a point source in liquid water, with a resolution of 41.3 attoseconds ($4.13 \times 10^{-17}$ sec) and 1.27 $Å$ ($1.27 \times 10^{-8}$ cm). This result is used to determine the structu… ▽ More We show that the momentum flexibility of inelastic x-ray scattering may be exploited to invert its loss function, alowing real time imaging of density disturbances in a medium. We show the disturbance arising from a point source in liquid water, with a resolution of 41.3 attoseconds ($4.13 \times 10^{-17}$ sec) and 1.27 $Å$ ($1.27 \times 10^{-8}$ cm). This result is used to determine the structure of the electron cloud around a photoexcited molecule in solution, as well as the wake generated in water by a 9 MeV gold ion. We draw an analogy with pump-probe techniques and suggest that energy-loss scattering may be applied more generally to the study of attosecond phenomena. △ Less

Submitted 17 November, 2003; originally announced November 2003.

Comments: 4 pages, 4 color figures

Journal ref: Phys. Rev. Lett., 92, 237401 (2004)

Pressure Induced Hydration Dynamics of Membranes

Authors: F. Osterberg, M. Kriechbaum, A. Polcyn, V. Skita, M. W. Tate, P. T. C. So, S. M. Gruner, Shyamsunder Erramilli

Abstract: Pressure-jump initiated time-resolved x-ray diffraction studies of dynamics of the hydration of the hexagonal phase in biological membranes show that (i) the relaxation of the unit cell spacing is non-exponential in time; (ii) the Bragg peaks shift smoothly to their final positions without significant broadening or loss in crystalline order. This suggests that the hydration is not diffusion limi… ▽ More Pressure-jump initiated time-resolved x-ray diffraction studies of dynamics of the hydration of the hexagonal phase in biological membranes show that (i) the relaxation of the unit cell spacing is non-exponential in time; (ii) the Bragg peaks shift smoothly to their final positions without significant broadening or loss in crystalline order. This suggests that the hydration is not diffusion limited but occurs via a rather homogeneous swelling of the whole lattice, described by power law kinetics with an exponent $ β= 1.3 \pm 0.2$. △ Less

Submitted 28 October, 1993; originally announced October 1993.

Comments: REVTEX 3, 10 pages,3 figures(available on request),#0

Pressure Induced Topological Phase Transitions in Membranes

Authors: P. T. C. So, Sol M. Gruner, Shyamsunder Erramilli

Abstract: Some highly unusual features of a lipid-water liquid crystal are revealed by high pressure x-ray diffraction, light scattering and dilatometric studies of the lamellar (bilayer $L_α$) to nonlamellar inverse hexagonal ($H_{II}$) phase transition. (i) The size of the unit cell of the $H_{II}$ phase increases with increasing pressure. (ii) The transition volume, $ΔV_{bh}$, decreases and appears to… ▽ More Some highly unusual features of a lipid-water liquid crystal are revealed by high pressure x-ray diffraction, light scattering and dilatometric studies of the lamellar (bilayer $L_α$) to nonlamellar inverse hexagonal ($H_{II}$) phase transition. (i) The size of the unit cell of the $H_{II}$ phase increases with increasing pressure. (ii) The transition volume, $ΔV_{bh}$, decreases and appears to vanish as the pressure is increased. (iii) The intensity of scattered light increases as $ΔV_{bh}$ decreases. Data are presented which suggest that this increase is due to the formation of an intermediate cubic phase, as predicted by recent theoretical suggestions of the underlying universal phase sequence. △ Less

Submitted 4 October, 1992; originally announced October 1992.

Comments: 12 pages, typed using REVTEX 2.0