-
An Experimental Information Gathering and Utilization Systems (IGUS) Robot to Demonstrate the Physics of Now
Authors:
Ronald P. Gruber,
Ryan P. Smith
Abstract:
The past, present and future are not fundamental properties of Minkowski spacetime. It has been suggested that they are properties of a class of information gathering and utilizing systems (IGUSs).The past, present and future are psychologically created phenomena not actually properties of spacetime. A human is a model IGUS robot. We develop a way to establish that the past, present, and future do…
▽ More
The past, present and future are not fundamental properties of Minkowski spacetime. It has been suggested that they are properties of a class of information gathering and utilizing systems (IGUSs).The past, present and future are psychologically created phenomena not actually properties of spacetime. A human is a model IGUS robot. We develop a way to establish that the past, present, and future do not follow from the laws of physics by constructing robots that process information differently and therefore experience different nows (presents). We construct a customized virtual reality (VR) system which allows an observer to switch between present and past. This robot (human with VR system) can experience immersion in the immediate past ad libitum. Being able to actually construct an IGUS that has the same present at two different coordinates along the worldline lends support to the IGUS hypothesis.
△ Less
Submitted 10 December, 2018;
originally announced December 2018.
-
Anomaly Detection using Deep Learning based Image Completion
Authors:
Matthias Haselmann,
Dieter P. Gruber,
Paul Tabatabai
Abstract:
Automated surface inspection is an important task in many manufacturing industries and often requires machine learning driven solutions. Supervised approaches, however, can be challenging, since it is often difficult to obtain large amounts of labeled training data. In this work, we instead perform one-class unsupervised learning on fault-free samples by training a deep convolutional neural networ…
▽ More
Automated surface inspection is an important task in many manufacturing industries and often requires machine learning driven solutions. Supervised approaches, however, can be challenging, since it is often difficult to obtain large amounts of labeled training data. In this work, we instead perform one-class unsupervised learning on fault-free samples by training a deep convolutional neural network to complete images whose center regions are cut out. Since the network is trained exclusively on fault-free data, it completes the image patches with a fault-free version of the missing image region. The pixel-wise reconstruction error within the cut out region is an anomaly image which can be used for anomaly detection. Results on surface images of decorated plastic parts demonstrate that this approach is suitable for detection of visible anomalies and moreover surpasses all other tested methods.
△ Less
Submitted 16 November, 2018;
originally announced November 2018.
-
Modeling contrary size effects of tensile- and torsion-loaded oligocrystalline gold microwires
Authors:
E. Bayerschen,
A. Prahs,
S. Wulfinghoff,
M. Ziemann,
P. A. Gruber,
M. Walter,
T. Böhlke
Abstract:
When Chen et al. (2015, Acta Mater. 87, 78-85) investigated the deformation behavior of oligocrystalline gold microwires with varying diameters in both uniaxial tension and torsion, contrary size effects were observed for the different load cases. In accompanying microstructural studies it was found, that the microwires of different thickness reveal distinctive differences in grain size and textur…
▽ More
When Chen et al. (2015, Acta Mater. 87, 78-85) investigated the deformation behavior of oligocrystalline gold microwires with varying diameters in both uniaxial tension and torsion, contrary size effects were observed for the different load cases. In accompanying microstructural studies it was found, that the microwires of different thickness reveal distinctive differences in grain size and texture, respectively. As a consequence, a significant influence of these microstructural variations on the determined size effects was assumed. However, within the frame of their work, a direct confirmation could only be presented for the effect of the grain size. In the present work, the size-dependent mechanical response of the microwires is modeled with a gradient plasticity theory. By finite element simulations of simplified grain aggregates, the influence of the texture on the size effects is investigated under both loading conditions. It is shown that the experimentally observed contrary size effects can only be reproduced when taking into account the individual textures of the microwires of different thickness within the modeling.
△ Less
Submitted 19 May, 2016; v1 submitted 11 February, 2016;
originally announced February 2016.
-
Anatomizing deformation mechanisms in nanocrystalline Pd$_{90}$Au$_{10}$
Authors:
Manuel Grewer,
Christian Braun,
Michael Johannes Deckarm,
Jochen Lohmiller,
Patric Alfons Gruber,
Veijo Honkimäki,
Rainer Birringer
Abstract:
We utilized synchrotron-based in-situ diffraction and dominant shear deformation to identify, dissect, and quantify the relevant deformation mechanisms in nanocrystalline $\mathrm{Pd}_{90}\mathrm{Au}_{10}$ in the limiting case of grain sizes at or below 10 nm. We could identify lattice and grain boundary elasticity, shear shuffling operating in the core region of grain boundaries, stress driven gr…
▽ More
We utilized synchrotron-based in-situ diffraction and dominant shear deformation to identify, dissect, and quantify the relevant deformation mechanisms in nanocrystalline $\mathrm{Pd}_{90}\mathrm{Au}_{10}$ in the limiting case of grain sizes at or below 10 nm. We could identify lattice and grain boundary elasticity, shear shuffling operating in the core region of grain boundaries, stress driven grain boundary migration, and dislocation shear along lattice planes to contribute, however, with significantly different and nontrivial stress-dependent shares to overall deformation. Regarding lattice elasticity, we find that Hookean linear elasticity prevailed up to the maximal stress value of $\approx$ 1.6 GPa. Shear shuffling that propagates strain at/along grain boundaries increases progressively with increasing load to carry about two thirds of the overall strain in the regime of macroplasticity. Stress driven grain boundary migration requires overcoming a threshold stress slightly below the yield stress of $\approx$ 1.4 GPa and contributes a share of $\approx$ 10% to overall strain. Appreciable dislocation activity begins at a stress value of $\approx$ 0.9 GPa to then increase and eventually propagate a maximal share of $\approx$ 15% to overall strain. In the stress regime below 0.9 GPa, which is characterized by a markedly decreasing tangent modulus, shear shuffling and lattice- and grain boundary elasticity operate exclusively. The material response in this regime seems indicative of nonlinear viscous behavior rather than being correlated with work- or strain hardening as observed in conventional fcc metals.
△ Less
Submitted 18 September, 2017; v1 submitted 21 August, 2014;
originally announced August 2014.
-
An arithmetic proof of John's ellipsoid theorem
Authors:
Peter M. Gruber,
Franz E. Schuster
Abstract:
Using an idea of Voronoi in the geometric theory of positive definite quadratic forms, we give a transparent proof of John's characterization of the unique ellipsoid of maximum volume contained in a convex body. The same idea applies to the 'hard part' of a generalization of John's theorem and shows the difficulties of the corresponding 'easy part'.
Using an idea of Voronoi in the geometric theory of positive definite quadratic forms, we give a transparent proof of John's characterization of the unique ellipsoid of maximum volume contained in a convex body. The same idea applies to the 'hard part' of a generalization of John's theorem and shows the difficulties of the corresponding 'easy part'.
△ Less
Submitted 31 July, 2012;
originally announced July 2012.
-
Homogenization of composites with interfacial debonding using duality-based solver and micromechanics
Authors:
P. Gruber,
J. Zeman,
J. Kruis,
M. Sejnoha
Abstract:
One of the key aspects governing the mechanical performance of composite materials is debonding: the local separation of reinforcing constituents from matrix when the interfacial strength is exceeded. In this contribution, two strategies to estimate the overall response of particulate composites with rigid-brittle interfaces are investigated. The first approach is based on a detailed numerical r…
▽ More
One of the key aspects governing the mechanical performance of composite materials is debonding: the local separation of reinforcing constituents from matrix when the interfacial strength is exceeded. In this contribution, two strategies to estimate the overall response of particulate composites with rigid-brittle interfaces are investigated. The first approach is based on a detailed numerical representation of a composite microstructure. The resulting problem is discretized using the Finite Element Tearing and Interconnecting method, which, apart from computational efficiency, allows for an accurate representation of interfacial tractions as well as mutual inter-phase contact conditions. The candidate solver employs the assumption of uniform fields within the composite estimated using the Mori-Tanaka method. A set of representative numerical examples is presented to assess the added value of the detailed numerical model over the simplified micromechanics approach.
△ Less
Submitted 1 June, 2009;
originally announced June 2009.
-
Strain bursts in plastically deforming Molybdenum micro- and nanopillars
Authors:
M. Zaiser,
J. Schwerdtfeger,
A. S. Schneider,
C. P. Frick,
B. G. Clark,
P. A. Gruber,
E. Arzt
Abstract:
Plastic deformation of micron and sub-micron scale specimens is characterized by intermittent sequences of large strain bursts (dislocation avalanches) which are separated by regions of near-elastic loading. In the present investigation we perform a statistical characterization of strain bursts observed in stress-controlled compressive deformation of monocrystalline Molybdenum micropillars. We c…
▽ More
Plastic deformation of micron and sub-micron scale specimens is characterized by intermittent sequences of large strain bursts (dislocation avalanches) which are separated by regions of near-elastic loading. In the present investigation we perform a statistical characterization of strain bursts observed in stress-controlled compressive deformation of monocrystalline Molybdenum micropillars. We characterize the bursts in terms of the associated elongation increments and peak deformation rates, and demonstrate that these quantities follow power-law distributions that do not depend on specimen orientation or stress rate. We also investigate the statistics of stress increments in between the bursts, which are found to be Weibull distributed and exhibit a characteristic size effect. We discuss our findings in view of observations of deformation bursts in other materials, such as face-centered cubic and hexagonal metals.
△ Less
Submitted 13 February, 2008;
originally announced February 2008.
-
Landing the uniformly accelerating observers
Authors:
Bernhard Rothenstein,
Stefan Popescu,
Ronald P. Gruber
Abstract:
Observers of the uniformly accelerating observers or the observers who make up the system of uniformly accelerating observers reach the same velocity V at different times ti which depends on V and on theirs acceleration gi. Considering a platform that moves with constant velocity V, the observers can land smoothly on it. Their ages and locations in the inertial reference frame attached to the pl…
▽ More
Observers of the uniformly accelerating observers or the observers who make up the system of uniformly accelerating observers reach the same velocity V at different times ti which depends on V and on theirs acceleration gi. Considering a platform that moves with constant velocity V, the observers can land smoothly on it. Their ages and locations in the inertial reference frame attached to the platform are reckoned and compared.
△ Less
Submitted 25 October, 2006;
originally announced October 2006.
-
An Optimal Lower Bound for the Frobenius Problem
Authors:
Iskander Aliev,
Peter Gruber
Abstract:
Given $N$ positive integers $a_1, ..., a_N$ with $\gcd(a_1, ..., a_N)=1$, let $f_N$ denote the largest natural number which is not a positive integer combination of $a_1, ..., a_N$. This paper gives an optimal lower bound for $f_N$ in terms of the absolute inhomogeneous minimum of the standard $(N-1)$-simplex.
Given $N$ positive integers $a_1, ..., a_N$ with $\gcd(a_1, ..., a_N)=1$, let $f_N$ denote the largest natural number which is not a positive integer combination of $a_1, ..., a_N$. This paper gives an optimal lower bound for $f_N$ in terms of the absolute inhomogeneous minimum of the standard $(N-1)$-simplex.
△ Less
Submitted 29 March, 2006; v1 submitted 5 December, 2005;
originally announced December 2005.
-
The scattering of muons in low Z materials
Authors:
MuScat Collaboration,
D. Attwood,
P. Bell,
S. Bull,
T. McMahon,
J. Wilson,
R. Fernow,
P. Gruber,
A. Jamdagni,
K. Long,
E. McKigney,
P. Savage,
M. Curtis-Rouse,
T. R. Edgecock,
M. Ellis,
J. Lidbury,
W. J. Murray,
P. Norton,
K. Peach,
K. Ishida,
Y. Matsuda,
K. Nagamine,
S. Nakamura,
G. M. Marshall,
S. Benveniste
, et al. (6 additional authors not shown)
Abstract:
This paper presents the measurement of the scattering of 172 MeV/c muons in assorted materials, including liquid hydrogen, motivated by the need to understand ionisation cooling for muon acceleration.
Data are compared with predictions from the Geant 4 simulation code and this simulation is used to deconvolute detector effects. The scattering distributions obtained are compared with the Molier…
▽ More
This paper presents the measurement of the scattering of 172 MeV/c muons in assorted materials, including liquid hydrogen, motivated by the need to understand ionisation cooling for muon acceleration.
Data are compared with predictions from the Geant 4 simulation code and this simulation is used to deconvolute detector effects. The scattering distributions obtained are compared with the Moliere theory of multiple scattering and, in the case of liquid hydrogen, with ELMS. With the exception of ELMS, none of the models are found to provide a good description of the data. The results suggest that ionisation cooling will work better than would be predicted by Geant 4.7.0p01.
△ Less
Submitted 2 December, 2005;
originally announced December 2005.
-
Best Simultaneous Diophantine Approximations under a Constraint on the Denominator
Authors:
Iskander Aliev,
Peter Gruber
Abstract:
We investigate the problem of best simultaneous Diophantine approximation under a constraint on the denominator, as proposed by Jurkat. New lower estimates for optimal approximation constants are given in terms of critical determinants of suitable star bodies. Tools are results on simultaneous Diophantine approximation of rationals by rationals with smaller denominator. Finally, the approximatio…
▽ More
We investigate the problem of best simultaneous Diophantine approximation under a constraint on the denominator, as proposed by Jurkat. New lower estimates for optimal approximation constants are given in terms of critical determinants of suitable star bodies. Tools are results on simultaneous Diophantine approximation of rationals by rationals with smaller denominator. Finally, the approximation results are applied to the decomposition of integer vectors.
△ Less
Submitted 19 October, 2005; v1 submitted 8 October, 2005;
originally announced October 2005.
-
Lattice Points in Large Borel Sets and Successive Minima
Authors:
Iskander Aliev,
Peter Gruber
Abstract:
Let $B$ be a Borel set in $\mathbb E^{d}$ with volume $V(B)=\infty$. It is shown that almost all lattices $L$ in $\mathbb E^{d}$ contain infinitely many pairwise disjoint $d$-tuples, that is sets of $d$ linearly independent points in $B$. A consequence of this result is the following: let $S$ be a star body in $\mathbb E^{d}$ with $V(S)=\infty$. Then for almost all lattices $L$ in…
▽ More
Let $B$ be a Borel set in $\mathbb E^{d}$ with volume $V(B)=\infty$. It is shown that almost all lattices $L$ in $\mathbb E^{d}$ contain infinitely many pairwise disjoint $d$-tuples, that is sets of $d$ linearly independent points in $B$. A consequence of this result is the following: let $S$ be a star body in $\mathbb E^{d}$ with $V(S)=\infty$. Then for almost all lattices $L$ in $\mathbb E^{d}$ the successive minima $λ_{1}(S,L),..., λ_{d}(S,L)$ of $S$ with respect to $L$ are 0. A corresponding result holds for most lattices in the Baire category sense. A tool for the latter result is the semi-continuity of the successive minima.
△ Less
Submitted 8 October, 2005;
originally announced October 2005.
-
Phase Rotation, Cooling And Acceleration Of Muon Beams: A Comparison Of Different Approaches
Authors:
G. Franchetti,
S. Gilardoni,
P. Gruber,
K. Hanke,
H. Haseroth,
E. B. Holzer,
D. Kuechler,
A. M. Lombardi,
R. Scrivens
Abstract:
Experimental and theoretical activities are underway at CERN with the aim of examining the feasibility of a very-high-flux neutrino source. In the present scheme, a high-power proton beam (some 4 MW) bombards a target where pions are produced. The pions are collected and decay to muons under controlled optical condition. The muons are cooled and accelerated to a final energy of 50 GeV before bei…
▽ More
Experimental and theoretical activities are underway at CERN with the aim of examining the feasibility of a very-high-flux neutrino source. In the present scheme, a high-power proton beam (some 4 MW) bombards a target where pions are produced. The pions are collected and decay to muons under controlled optical condition. The muons are cooled and accelerated to a final energy of 50 GeV before being injected into a decay ring where they decay under well-defined conditions of energy and emittance.
We present the most challenging parts of the whole scenario, the muon capture, the ionisation-cooling and the first stage of the muon acceleration. Different schemes, their performance and the technical challenges are compared.
△ Less
Submitted 15 August, 2000;
originally announced August 2000.