-
Virtual Elastic Tether: a New Approach for Multi-agent Navigation in Confined Aquatic Environments
Authors:
Kanzhong Yao,
Xueliang Cheng,
Keir Groves,
Barry Lennox,
Ognjen Marjanovic,
Simon Watson
Abstract:
Underwater navigation is a challenging area in the field of mobile robotics due to inherent constraints in self-localisation and communication in underwater environments. Some of these challenges can be mitigated by using collaborative multi-agent teams. However, when applied underwater, the robustness of traditional multi-agent collaborative control approaches is highly limited due to the unavail…
▽ More
Underwater navigation is a challenging area in the field of mobile robotics due to inherent constraints in self-localisation and communication in underwater environments. Some of these challenges can be mitigated by using collaborative multi-agent teams. However, when applied underwater, the robustness of traditional multi-agent collaborative control approaches is highly limited due to the unavailability of reliable measurements. In this paper, the concept of a Virtual Elastic Tether (VET) is introduced in the context of incomplete state measurements, which represents an innovative approach to underwater navigation in confined spaces. The concept of VET is formulated and validated using the Cooperative Aquatic Vehicle Exploration System (CAVES), which is a sim-to-real multi-agent aquatic robotic platform. Within this framework, a vision-based Autonomous Underwater Vehicle-Autonomous Surface Vehicle leader-follower formulation is developed. Experiments were conducted in both simulation and on a physical platform, benchmarked against a traditional Image-Based Visual Servoing approach. Results indicate that the formation of the baseline approach fails under discrete disturbances, when induced distances between the robots exceeds 0.6 m in simulation and 0.3 m in the real world. In contrast, the VET-enhanced system recovers to pre-perturbation distances within 5 seconds. Furthermore, results illustrate the successful navigation of VET-enhanced CAVES in a confined water pond where the baseline approach fails to perform adequately.
△ Less
Submitted 15 March, 2024;
originally announced March 2024.
-
Collaborative Aquatic Positioning System Utilising Multi-beam Sonar and Depth Sensors
Authors:
{Xueliang Cheng,
Barry Lennox,
Keir Groves
Abstract:
Accurate positioning of remotely operated underwater vehicles (ROVs) in confined environments is crucial for inspection and map** tasks and is also a prerequisite for autonomous operations. Presently, there are no positioning systems available that are suited for real-world use in confined underwater environments, unconstrained by environmental lighting and water turbidity levels and have suffic…
▽ More
Accurate positioning of remotely operated underwater vehicles (ROVs) in confined environments is crucial for inspection and map** tasks and is also a prerequisite for autonomous operations. Presently, there are no positioning systems available that are suited for real-world use in confined underwater environments, unconstrained by environmental lighting and water turbidity levels and have sufficient accuracy for long-term, reliable and repeatable navigation. This shortage presents a significant barrier to enhancing the capabilities of ROVs in such scenarios. This paper introduces an innovative positioning system for ROVs operating in confined, cluttered underwater settings, achieved through the collaboration of an omnidirectional surface vehicle and an ROV. A formulation is proposed and evaluated in the simulation against ground truth. The experimental results from the simulation form a proof of principle of the proposed system and also demonstrate its deployability. Unlike many previous approaches, the system does not rely on fixed infrastructure or tracking of features in the environment and can cover large enclosed areas without additional equipment.
△ Less
Submitted 18 March, 2024; v1 submitted 15 March, 2024;
originally announced March 2024.
-
Millimeter-Wave Sensing for Avoidance of High-Risk Ground Conditions for Mobile Robots
Authors:
Jamie Blanche,
Shivoh Chirayil Nandakumar,
Daniel Mitchell,
Sam Harper,
Keir Groves,
Andrew West,
Barry Lennox,
Simon Watson,
David Flynn,
Ikuo Yamamoto
Abstract:
Mobile robot autonomy has made significant advances in recent years, with navigation algorithms well developed and used commercially in certain well-defined environments, such as warehouses. The common link in usage scenarios is that the environments in which the robots are utilized have a high degree of certainty. Operating environments are often designed to be robot friendly, for example augment…
▽ More
Mobile robot autonomy has made significant advances in recent years, with navigation algorithms well developed and used commercially in certain well-defined environments, such as warehouses. The common link in usage scenarios is that the environments in which the robots are utilized have a high degree of certainty. Operating environments are often designed to be robot friendly, for example augmented reality markers are strategically placed and the ground is typically smooth, level, and clear of debris. For robots to be useful in a wider range of environments, especially environments that are not sanitized for their use, robots must be able to handle uncertainty. This requires a robot to incorporate new sensors and sources of information, and to be able to use this information to make decisions regarding navigation and the overall mission. When using autonomous mobile robots in unstructured and poorly defined environments, such as a natural disaster site or in a rural environment, ground condition is of critical importance and is a common cause of failure. Examples include loss of traction due to high levels of ground water, hidden cavities, or material boundary failures. To evaluate a non-contact sensing method to mitigate these risks, Frequency Modulated Continuous Wave (FMCW) radar is integrated with an Unmanned Ground Vehicle (UGV), representing a novel application of FMCW to detect new measurands for Robotic Autonomous Systems (RAS) navigation, informing on terrain integrity and adding to the state-of-the-art in sensing for optimized autonomous path planning. In this paper, the FMCW is first evaluated in a desktop setting to determine its performance in anticipated ground conditions. The FMCW is then fixed to a UGV and the sensor system is tested and validated in a representative environment containing regions with significant levels of ground water saturation.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.
-
MIRRAX: A Reconfigurable Robot for Limited Access Environments
Authors:
Wei Cheah,
Keir Groves,
Horatio Martin,
Harriet Peel,
Simon Watson,
Ognjen Marjanovic,
Barry Lennox
Abstract:
The development of mobile robot platforms for inspection has gained traction in recent years with the rapid advancement in hardware and software. However, conventional mobile robots are unable to address the challenge of operating in extreme environments where the robot is required to traverse narrow gaps in highly cluttered areas with restricted access. This paper presents MIRRAX, a robot that ha…
▽ More
The development of mobile robot platforms for inspection has gained traction in recent years with the rapid advancement in hardware and software. However, conventional mobile robots are unable to address the challenge of operating in extreme environments where the robot is required to traverse narrow gaps in highly cluttered areas with restricted access. This paper presents MIRRAX, a robot that has been designed to meet these challenges with the capability of re-configuring itself to both access restricted environments through narrow ports and navigate through tightly spaced obstacles. Controllers for the robot are detailed, along with an analysis on the controllability of the robot given the use of Mecanum wheels in a variable configuration. Characterisation on the robot's performance identified suitable configurations for operating in narrow environments. The minimum lateral footprint width achievable for stable configuration ($<2^\text{o}$~roll) was 0.19~m. Experimental validation of the robot's controllability shows good agreement with the theoretical analysis. A further series of experiments shows the feasibility of the robot in addressing the challenges above: the capability to reconfigure itself for restricted entry through ports as small as 150mm diameter, and navigating through cluttered environments. The paper also presents results from a deployment in a Magnox facility at the Sellafield nuclear site in the UK - the first robot to ever do so, for remote inspection and map**.
△ Less
Submitted 3 October, 2022; v1 submitted 1 March, 2022;
originally announced March 2022.
-
2L-3W: 2-Level 3-Way Hardware-Software Co-Verification for the Map** of Deep Learning Architecture (DLA) onto FPGA Boards
Authors:
Tolulope A. Odetola,
Katie M. Groves,
Syed Rafay Hasan
Abstract:
FPGAs have become a popular choice for deploying deep learning architectures (DLA). There are many researchers that have explored the deployment and map** of DLA on FPGA. However, there has been a growing need to do design-time hardware-software co-verification of these deployments. To the best of our knowledge this is the first work that proposes a 2-Level 3-Way (2L-3W) hardware-software co-ver…
▽ More
FPGAs have become a popular choice for deploying deep learning architectures (DLA). There are many researchers that have explored the deployment and map** of DLA on FPGA. However, there has been a growing need to do design-time hardware-software co-verification of these deployments. To the best of our knowledge this is the first work that proposes a 2-Level 3-Way (2L-3W) hardware-software co-verification methodology and provides a step-by-step guide for the successful map**, deployment and verification of DLA on FPGA boards. The 2-Level verification is to make sure the implementation in each stage (software and hardware) are following the desired behavior. The 3-Way co-verification provides a cross-paradigm (software, design and hardware) layer-by-layer parameter check to assure the correct implementation and map** of the DLA onto FPGA boards. The proposed 2L-3W co-verification methodology has been evaluated over several test cases. In each case, the prediction and layer-by-layer output of the DLA deployed on PYNQ FPGA board (hardware) alongside with the intermediate design results of the layer-by-layer output of the DLA implemented on Vivado HLS and the prediction and layer-by-layer output of the software level (Caffe deep learning framework) are compared to obtain a layer-by-layer similarity score. The comparison is achieved using a completely automated Python script. The comparison provides a layer-by-layer similarity score that informs us the degree of success of the DLA map** to the FPGA or help identify in design time the layer to be debugged in the case of unsuccessful map**. We demonstrated our technique on LeNet DLA and Caffe inspired Cifar-10 DLA and the co-verification results yielded layer-by-layer similarity scores of 99\% accuracy.
△ Less
Submitted 14 November, 2019;
originally announced November 2019.
-
Two dimensional nature of superconductivity in intercalated layered systems Li$_{x}$HfNCl and Li$_{x}$ZrNCl: muon spin relaxation and magnetization measurements
Authors:
T. Ito,
Y. Fudamoto,
A. Fukaya,
I. M. Gat-Malureanu,
M. I. Larkin,
P. L. Russo,
A. Savici,
Y. J. Uemura,
K. Groves,
R. Breslow,
K. Hotehama,
S. Yamanaka,
P. Kyriakou,
M. Rovers,
G. M. Luke,
K. M. Kojima
Abstract:
We report muon spin relaxation ($μ$SR) and magnetization measurements, together with synthesis and characterization, of the Li-intercalated layered superconductors Li$_{x}$HfNCl and Li$_{x}$ZrNCl with/without co-intercalation of THF (tetrahydrofuran) or PC (propylene carbonate). The 3-dimensional (3-d) superfluid density $n_{s}/m^{*}$ (superconducting carrier density / effective mass), as well a…
▽ More
We report muon spin relaxation ($μ$SR) and magnetization measurements, together with synthesis and characterization, of the Li-intercalated layered superconductors Li$_{x}$HfNCl and Li$_{x}$ZrNCl with/without co-intercalation of THF (tetrahydrofuran) or PC (propylene carbonate). The 3-dimensional (3-d) superfluid density $n_{s}/m^{*}$ (superconducting carrier density / effective mass), as well as the two dimensional superfluid density $n_{s2d}/m^{*}_{ab}$ (2-dimensional (2-d) area density of superconducting carriers / ab-plane effective mass), have been derived from the $μ$SR results of the magnetic-field penetration depth $λ_{ab}$ observed with external magnetic field applied perpendicular to the 2-d honeycomb layer of HfN / ZrN. In a plot of $T_{c}$ versus $n_{s2d}/m^{*}_{ab}$, most of the results lie close to the linear relationship found for underdoped high-$T_{c}$ cuprate (HTSC) and layered organic BEDT superconductors. In Li$_{x}$ZrNCl without THF intercalation, the superfluid density and $T_{c}$ for $x$ = 0.17 and 0.4 do not show much difference, reminiscent of $μ$SR results for some overdoped HTSC systems. Together with the absence of dependence of $T_{c}$ on average interlayer distance among ZrN / HfN layers, these results suggest that the 2-d superfluid density $n_{s2d}/m^{*}_{ab}$ is a dominant determining factor for $T_{c}$ in the intercalated nitride-chloride systems. We also report $μ$SR and magnetization results on depinning of flux vortices, and the magnetization results for the upper critical field $H_{c2}$ and the penetration depth $λ$. Reasonable agreement was obtained between $μ$SR and magnetization estimates of $λ$. We discuss the two dimensional nature of superconductivity in the nitride-chloride systems based on these results.
△ Less
Submitted 30 October, 2003;
originally announced October 2003.
