-
Wavelet-Based Fast Decoding of 360-Degree Videos
Authors:
Colin Groth,
Sascha Fricke,
Susana Castillo,
Marcus Magnor
Abstract:
In this paper, we propose a wavelet-based video codec specifically designed for VR displays that enables real-time playback of high-resolution 360° videos. Our codec exploits the fact that only a fraction of the full 360° video frame is visible on the display at any time. To load and decode the video viewport-dependently in real time, we make use of the wavelet transform for intra- as well as inte…
▽ More
In this paper, we propose a wavelet-based video codec specifically designed for VR displays that enables real-time playback of high-resolution 360° videos. Our codec exploits the fact that only a fraction of the full 360° video frame is visible on the display at any time. To load and decode the video viewport-dependently in real time, we make use of the wavelet transform for intra- as well as inter-frame coding. Thereby, the relevant content is directly streamed from the drive, without the need to hold the entire frames in memory. With an average of 193 frames per second at 8192x8192-pixel full-frame resolution, the conducted evaluation demonstrates that our codec's decoding performance is up to 272% higher than that of the state-of-the-art video codecs H.265 and AV1 for typical VR displays. By means of a perceptual study, we further illustrate the necessity of high frame rates for a better VR experience. Finally, we demonstrate how our wavelet-based codec can also directly be used in conjunction with foveation for further performance increase.
△ Less
Submitted 18 October, 2022; v1 submitted 23 August, 2022;
originally announced August 2022.
-
A novel formulation for the study of the ascending aortic fluid dynamics with in vivo data
Authors:
Katia Capellini,
Emanuele Gasparotti,
Ubaldo Cella,
Emiliano Costa,
Benigno Marco Fanni,
Corrado Groth,
Stefano Porziani,
Marco Evangelos Biancolini,
Simona Celi
Abstract:
Numerical simulations to evaluate thoracic aortic hemodynamics include a computational fluid dynamic (CFD) approach or fluid-structure interaction (FSI) approach. While CFD neglects the arterial deformation along the cardiac cycle by applying a rigid wall simplification, on the other side the FSI simulation requires a lot of assumptions for the material properties definition and high computational…
▽ More
Numerical simulations to evaluate thoracic aortic hemodynamics include a computational fluid dynamic (CFD) approach or fluid-structure interaction (FSI) approach. While CFD neglects the arterial deformation along the cardiac cycle by applying a rigid wall simplification, on the other side the FSI simulation requires a lot of assumptions for the material properties definition and high computational costs. The aim of this study is to investigate the feasibility of a new strategy, based on Radial Basis Functions (RBF) mesh morphing technique and transient simulations, able to introduce the patient-specific changes in aortic geometry during the cardiac cycle. Starting from medical images, aorta models at different phases of cardiac cycle were reconstructed and a transient shape deformation was obtained by proper activating incremental RBF solutions during the simulation process. The results, in terms of main hemodynamic parameters, were compared with two performed CFD simulations for the aortic model at minimum and maximum volume. Our implemented strategy copes the actual arterial variation during cardiac cycle with high accuracy, capturing the impact of geometrical variations on fluid dynamics, overcoming the complexity of a standard FSI approach.
△ Less
Submitted 1 April, 2022;
originally announced April 2022.
-
High fidelity fluid-structure interaction by radial basis functions mesh adaption of moving walls: a workflow applied to an aortic valve
Authors:
Leonardo Geronzi,
Emanuele Gasparotti,
Katia Capellini,
Ubaldo Cella,
Corrado Groth,
Stefano Porziani,
Andrea Chiappa,
Simona Celi,
Marco Evangelos Biancolini
Abstract:
Fluid-Structure Interaction (FSI) can be investigated by means of non-linear Finite Element Models (FEM), suitable to capture large deflections of structural parts interacting with fluids, and Computational Fluid Dynamics (CFD). High fidelity simulations are obtained using the fine spatial resolution of both the structural and fluid computational grids. A key enabler to have a proper exchange of i…
▽ More
Fluid-Structure Interaction (FSI) can be investigated by means of non-linear Finite Element Models (FEM), suitable to capture large deflections of structural parts interacting with fluids, and Computational Fluid Dynamics (CFD). High fidelity simulations are obtained using the fine spatial resolution of both the structural and fluid computational grids. A key enabler to have a proper exchange of information between the structural solver and the fluid one is the management of the interface at wetted surfaces where the grids are usually non matching. A class of applications, known also as one-way FSI problems, involves a complex movement of the walls that is known in advance as measured or as computed by FEM, and that has to be imposed at the boundaries during a transient CFD solution. Effective methods for the time marching adaption of the whole computational grid of the CFD model according to the evolving shape of its boundaries are required. A very well established approach consists of a continuum update of the mesh that is regenerated by adding and removing cells to fit the evolution of the moving walls. In this paper, an innovative method based on Radial Basis Functions (RBF) mesh morphing is proposed, allowing the retention of the same mesh topology suitable for a continuum update of the shape. The proposed method is exact at a set of given key configurations and relies on shape blending time interpolation between key frames. The study of the complex motion of a Polymeric-Prosthetic Heart Valve (P-PHV) is presented using the new framework and considering as a reference the established approach based on remeshing.
△ Less
Submitted 29 March, 2022;
originally announced March 2022.
-
A 14-moment maximum-entropy description of electrons in crossed electric and magnetic fields
Authors:
Stefano Boccelli,
Fabien Giroux,
Thierry E. Magin,
Clinton P. T. Groth,
James G. McDonald
Abstract:
A 14-moment maximum-entropy system of equations is applied to the description of non-equilibrium electrons in crossed electric and magnetic fields and in the presence of low collisionality, characteristic of low-temperature plasma devices. The flexibility of this formulation is analyzed through comparison with analytical results for steady-state non-equilibrium velocity distribution functions and…
▽ More
A 14-moment maximum-entropy system of equations is applied to the description of non-equilibrium electrons in crossed electric and magnetic fields and in the presence of low collisionality, characteristic of low-temperature plasma devices. The flexibility of this formulation is analyzed through comparison with analytical results for steady-state non-equilibrium velocity distribution functions and against particle-based solutions of the time-dependent kinetic equation. Electric and magnetic source terms are derived for the 14-moment equations, starting from kinetic theory. A simplified BGK-like collision term is formulated to describe the collision of electrons with background neutrals, accounting for the large mass disparity and for energy exchange. An approximated expression is proposed for the collision frequency, to include the effect of the electrons drift velocity, showing good accuracy in the considered conditions. The capabilities of the proposed 14-moment closure to capture accurately non-equilibrium behaviour of electrons for space homogeneous problems under conditions representative of those found in Hall thrusters is demonstrated.
△ Less
Submitted 26 March, 2021;
originally announced March 2021.
-
Tkwant: a software package for time-dependent quantum transport
Authors:
Thomas Kloss,
Joseph Weston,
Benoit Gaury,
Benoit Rossignol,
Christoph Groth,
Xavier Waintal
Abstract:
Tkwant is a Python package for the simulation of quantum nanoelectronics devices to which external time-dependent perturbations are applied. Tkwant is an extension of the Kwant package (https://kwant-project.org/) and can handle the same types of systems: discrete tight-binding-like models that consist of an arbitrary central region connected to semi-infinite electrodes. The problem is genuinely m…
▽ More
Tkwant is a Python package for the simulation of quantum nanoelectronics devices to which external time-dependent perturbations are applied. Tkwant is an extension of the Kwant package (https://kwant-project.org/) and can handle the same types of systems: discrete tight-binding-like models that consist of an arbitrary central region connected to semi-infinite electrodes. The problem is genuinely many-body even in the absence of interactions and is treated within the non-equilibrium Keldysh formalism. Examples of Tkwant applications include the propagation of plasmons generated by voltage pulses, propagation of excitations in the quantum Hall regime, spectroscopy of Majorana fermions in semiconducting nanowires, current-induced skyrmion motion in spintronic devices, multiple Andreev reflection, Floquet topological insulators, thermoelectric effects, and more. The code has been designed to be easy to use and modular. Tkwant is free software distributed under a BSD license and can be found at https://tkwant.kwant-project.org/.
△ Less
Submitted 22 February, 2021; v1 submitted 7 September, 2020;
originally announced September 2020.
-
Nonlocal Spin Dynamics in the Crossover from Diffusive to Ballistic Transport
Authors:
Marc Vila,
Jose H. Garcia,
Aron W. Cummings,
Stephen R. Power,
Christoph W. Groth,
Xavier Waintal,
Stephan Roche
Abstract:
Improved fabrication techniques have enabled the possibility of ballistic transport and unprecedented spin manipulation in ultraclean graphene devices. Spin transport in graphene is typically probed in a nonlocal spin valve and is analyzed using spin diffusion theory, but this theory is not necessarily applicable when charge transport becomes ballistic or when the spin diffusion length is exceptio…
▽ More
Improved fabrication techniques have enabled the possibility of ballistic transport and unprecedented spin manipulation in ultraclean graphene devices. Spin transport in graphene is typically probed in a nonlocal spin valve and is analyzed using spin diffusion theory, but this theory is not necessarily applicable when charge transport becomes ballistic or when the spin diffusion length is exceptionally long. Here, we study these regimes by performing quantum simulations of graphene nonlocal spin valves. We find that conventional spin diffusion theory fails to capture the crossover to the ballistic regime as well as the limit of long spin diffusion length. We show that the latter can be described by an extension of the current theoretical framework. Finally, by covering the whole range of spin dynamics, our study opens a new perspective to predict and scrutinize spin transport in graphene and other two-dimensional material-based ultraclean devices.
△ Less
Submitted 22 May, 2020; v1 submitted 14 October, 2019;
originally announced October 2019.
-
Pushing the limit of quantum transport simulations
Authors:
Mathieu Istas,
Christoph Groth,
Xavier Waintal
Abstract:
Simulations of quantum transport in coherent conductors have evolved into mature techniques that are used in fields of physics ranging from electrical engineering to quantum nanoelectronics and material science. The most efficient general-purpose algorithms have a computational cost that scales as $L^{6 \dots 7}$ in 3D, which on the one hand is a substantial improvement over older algorithms, but…
▽ More
Simulations of quantum transport in coherent conductors have evolved into mature techniques that are used in fields of physics ranging from electrical engineering to quantum nanoelectronics and material science. The most efficient general-purpose algorithms have a computational cost that scales as $L^{6 \dots 7}$ in 3D, which on the one hand is a substantial improvement over older algorithms, but on the other hand still severely restricts the size of the simulation domain, limiting the usefulness of simulations through strong finite-size effects. Here, we present a novel class of algorithms that, for certain systems, allows to directly access the thermodynamic limit. Our approach, based on the Green's function formalism for discrete models, targets systems which are mostly invariant by translation, i.e. invariant by translation up to a finite number of orbitals and/or quasi-1D electrodes and/or the presence of edges or surfaces. Our approach is based on an automatic calculation of the poles and residues of series expansions of the Green's function in momentum space. This expansion allows to integrate analytically in one momentum variable. We illustrate our algorithms with several applications: devices with graphene electrodes that consist of half an infinite sheet; Friedel oscillation calculations of infinite 2D systems in presence of an impurity; quantum spin Hall physics in presence of an edge; the surface of a Weyl semi-metal in presence of impurities and electrodes connected to the surface. In this last example, we study the conduction through the Fermi arcs of the topological material and its resilience to the presence of disorder. Our approach provides a practical route for simulating 3D bulk systems or surfaces as well as other setups that have so far remained elusive.
△ Less
Submitted 21 June, 2019;
originally announced June 2019.
-
The self-consistent quantum-electrostatic problem in strongly non-linear regime
Authors:
P. Armagnat,
A. Lacerda-Santos,
B. Rossignol,
C. Groth,
X. Waintal
Abstract:
The self-consistent quantum-electrostatic (also known as Poisson-Schrödinger) problem is notoriously difficult in situations where the density of states varies rapidly with energy. At low temperatures, these fluctuations make the problem highly non-linear which renders iterative schemes deeply unstable. We present a stable algorithm that provides a solution to this problem with controlled accuracy…
▽ More
The self-consistent quantum-electrostatic (also known as Poisson-Schrödinger) problem is notoriously difficult in situations where the density of states varies rapidly with energy. At low temperatures, these fluctuations make the problem highly non-linear which renders iterative schemes deeply unstable. We present a stable algorithm that provides a solution to this problem with controlled accuracy. The technique is intrinsically convergent including in highly non-linear regimes. We illustrate our approach with (i) a calculation of the compressible and incompressible stripes in the integer quantum Hall regime and (ii) a calculation of the differential conductance of a quantum point contact geometry. Our technique provides a viable route for the predictive modeling of the transport properties of quantum nanoelectronics devices.
△ Less
Submitted 30 August, 2019; v1 submitted 3 May, 2019;
originally announced May 2019.
-
A general algorithm for computing bound states in infinite tight-binding systems
Authors:
M. Istas,
C. Groth,
A. R. Akhmerov,
M. Wimmer,
X. waintal
Abstract:
We propose a robust and efficient algorithm for computing bound states of infinite tight-binding systems that are made up of a finite scattering region connected to semi-infinite leads. Our method uses wave matching in close analogy to the approaches used to obtain propagating states and scattering matrices. We show that our algorithm is robust in presence of slowly decaying bound states where a d…
▽ More
We propose a robust and efficient algorithm for computing bound states of infinite tight-binding systems that are made up of a finite scattering region connected to semi-infinite leads. Our method uses wave matching in close analogy to the approaches used to obtain propagating states and scattering matrices. We show that our algorithm is robust in presence of slowly decaying bound states where a diagonalization of a finite system would fail. It also allows to calculate the bound states that can be present in the middle of a continuous spectrum. We apply our technique to quantum billiards and the following topological materials: Majorana states in 1D superconducting nanowires, edge states in the 2D quantum spin Hall phase, and Fermi arcs in 3D Weyl semimetals.
△ Less
Submitted 24 April, 2018; v1 submitted 22 November, 2017;
originally announced November 2017.
-
Control of the Oscillatory Interlayer Exchange Interaction with Terahertz Radiation
Authors:
Uta Meyer,
Geraldine Haack,
Christoph Groth,
Xavier Waintal
Abstract:
The oscillatory interlayer exchange interaction between two magnetic layers separated by a metallic spacer is one of the few coherent quantum phenomena that persist at room temperature. Here we show that this interaction can be controlled dynamically by illuminating the sample (e.g. a spin valve) with radiation in the 10-100 THz range. We predict that the exchange interaction can be changed from f…
▽ More
The oscillatory interlayer exchange interaction between two magnetic layers separated by a metallic spacer is one of the few coherent quantum phenomena that persist at room temperature. Here we show that this interaction can be controlled dynamically by illuminating the sample (e.g. a spin valve) with radiation in the 10-100 THz range. We predict that the exchange interaction can be changed from ferromagnetic to anti-ferromagnetic (and vice versa) by tuning the amplitude and/or the frequency of the radiation. Our chief theoretical result is an expression that relates the dynamical exchange interaction to the static one that has already been extensively measured.
△ Less
Submitted 11 October, 2016;
originally announced October 2016.
-
Quantum Monte-Carlo for correlated out-of-equilibrium nanoelectronics devices
Authors:
Rosario E. V. Profumo,
Christoph Groth,
Laura Messio,
Olivier Parcollet,
Xavier Waintal
Abstract:
We present a simple, general purpose, quantum Monte-Carlo algorithm for out-of-equilibrium interacting nanoelectronics systems. It allows one to systematically compute the expansion of any physical observable (such as current or density) in powers of the electron-electron interaction coupling constant $U$. It is based on the out-of-equilibrium Keldysh Green's function formalism in real-time and co…
▽ More
We present a simple, general purpose, quantum Monte-Carlo algorithm for out-of-equilibrium interacting nanoelectronics systems. It allows one to systematically compute the expansion of any physical observable (such as current or density) in powers of the electron-electron interaction coupling constant $U$. It is based on the out-of-equilibrium Keldysh Green's function formalism in real-time and corresponds to evaluating all the Feynman diagrams to a given order $U^n$ (up to $n=15$ in the present work). A key idea is to explicitly sum over the Keldysh indices in order to enforce the unitarity of the time evolution. The method can easily reach long time, stationary regimes, even at zero temperature. We then illustrate our approach with an application to the Anderson model, an archetype interacting mesoscopic system. We recover various results of the literature such as the spin susceptibility or the "Kondo ridge" in the current-voltage characteristics. In this case, we found the Monte-Carlo free of the sign problem even at zero temperature, in the stationary regime and in absence of particle-hole symmetry. The main limitation of the method is the lack of convergence of the expansion in $U$ for large $U$, i.e. a mathematical property of the model rather than a limitation of the Monte-Carlo algorithm. Standard extrapolation methods of divergent series can be used to evaluate the series in the strong correlation regime.
△ Less
Submitted 8 June, 2015; v1 submitted 8 April, 2015;
originally announced April 2015.
-
Classical and quantum spreading of a charge pulse
Authors:
Benoit Gaury,
Joseph Weston,
Christoph Groth,
Xavier Waintal
Abstract:
With the technical progress of radio-frequency setups, high frequency quantum transport experiments have moved from theory to the lab. So far the standard theoretical approach used to treat such problems numerically--known as Keldysh or NEGF (Non Equilibrium Green's Functions) formalism--has not been very successful mainly because of a prohibitive computational cost. We propose a reformulation of…
▽ More
With the technical progress of radio-frequency setups, high frequency quantum transport experiments have moved from theory to the lab. So far the standard theoretical approach used to treat such problems numerically--known as Keldysh or NEGF (Non Equilibrium Green's Functions) formalism--has not been very successful mainly because of a prohibitive computational cost. We propose a reformulation of the non-equilibrium Green's function technique in terms of the electronic wave functions of the system in an energy-time representation. The numerical algorithm we obtain scales now linearly with the simulated time and the volume of the system, and makes simulation of systems with 10^5 - 10^6 atoms/sites feasible. We illustrate our method with the propagation and spreading of a charge pulse in the quantum Hall regime. We identify a classical and a quantum regime for the spreading, depending on the number of particles contained in the pulse. This numerical experiment is the condensed matter analogue to the spreading of a Gaussian wavepacket discussed in quantum mechanics textbooks.
△ Less
Submitted 15 July, 2014; v1 submitted 27 June, 2014;
originally announced June 2014.
-
Theoretical, numerical, and experimental study of a flying qubit electronic interferometer
Authors:
Tobias Bautze,
Christoph Süssmeier,
Shintaro Takada,
Christoph Groth,
Tristan Meunier,
Michihisa Yamamoto,
Seigo Tarucha,
Xavier Waintal,
Christopher Bäuerle
Abstract:
We discuss an electronic interferometer recently measured by Yamamoto et al. This "flying quantum bit" experiment showed quantum oscillations between electronic trajectories of two tunnel-coupled wires connected via an Aharanov-Bohm ring. We present a simple scattering model as well as a numerical microscopic model to describe this experiment. In addition, we present new experimental data to which…
▽ More
We discuss an electronic interferometer recently measured by Yamamoto et al. This "flying quantum bit" experiment showed quantum oscillations between electronic trajectories of two tunnel-coupled wires connected via an Aharanov-Bohm ring. We present a simple scattering model as well as a numerical microscopic model to describe this experiment. In addition, we present new experimental data to which we confront our numerical results. While our analytical model provides basic concepts for designing the flying qubit device, we find that our numerical simulations allow to reproduce detailed features of the transport measurements such as in-phase and anti-phase oscillations of the two output currents as well as a smooth phase shift when swee** a side gate. Furthermore, we find remarkable resemblance for the magneto conductance oscillations in both conductance and visibility between simulations and experiments within a specific parameter range.
△ Less
Submitted 22 April, 2014; v1 submitted 18 December, 2013;
originally announced December 2013.
-
Kwant: a software package for quantum transport
Authors:
Christoph W. Groth,
Michael Wimmer,
Anton R. Akhmerov,
Xavier Waintal
Abstract:
Kwant is a Python package for numerical quantum transport calculations. It aims to be an user-friendly, universal, and high-performance toolbox for the simulation of physical systems of any dimensionality and geometry that can be described by a tight-binding model. Kwant has been designed such that the natural concepts of the theory of quantum transport (lattices, symmetries, electrodes, orbital/s…
▽ More
Kwant is a Python package for numerical quantum transport calculations. It aims to be an user-friendly, universal, and high-performance toolbox for the simulation of physical systems of any dimensionality and geometry that can be described by a tight-binding model. Kwant has been designed such that the natural concepts of the theory of quantum transport (lattices, symmetries, electrodes, orbital/spin/electron-hole degrees of freedom) are exposed in a simple and transparent way: Defining a new simulation setup is very close to describing the corresponding mathematical model. Kwant offers direct support for calculations of transport properties (conductance, noise, scattering matrix), dispersion relations, modes, wave functions, various Green's functions, and out-of-equilibrium local quantities. Other computations involving tight-binding Hamiltonians can be implemented easily thanks to its extensible and modular nature. Kwant is free software available at http://kwant-project.org/.
△ Less
Submitted 1 July, 2014; v1 submitted 11 September, 2013;
originally announced September 2013.
-
Numerical simulations of time resolved quantum electronics
Authors:
Benoit Gaury,
Joseph Weston,
Matthieu Santin,
Manuel Houzet,
Christoph Groth,
Xavier Waintal
Abstract:
This paper discusses the technical aspects - mathematical and numerical - associated with the numerical simulations of a mesoscopic system in the time domain (i.e. beyond the single frequency AC limit). After a short review of the state of the art, we develop a theoretical framework for the calculation of time resolved observables in a general multiterminal system subject to an arbitrary time depe…
▽ More
This paper discusses the technical aspects - mathematical and numerical - associated with the numerical simulations of a mesoscopic system in the time domain (i.e. beyond the single frequency AC limit). After a short review of the state of the art, we develop a theoretical framework for the calculation of time resolved observables in a general multiterminal system subject to an arbitrary time dependent perturbation (oscillating electrostatic gates, voltage pulses, time-vaying magnetic fields) The approach is mathematically equivalent to (i) the time dependent scattering formalism, (ii) the time resolved Non Equilibrium Green Function (NEGF) formalism and (iii) the partition-free approach. The central object of our theory is a wave function that obeys a simple Schrodinger equation with an additional source term that accounts for the electrons injected from the electrodes. The time resolved observables (current, density. . .) and the (inelastic) scattering matrix are simply expressed in term of this wave function. We use our approach to develop a numerical technique for simulating time resolved quantum transport. We find that the use of this wave function is advantageous for numerical simulations resulting in a speed up of many orders of magnitude with respect to the direct integration of NEGF equations. Our technique allows one to simulate realistic situations beyond simple models, a subject that was until now beyond the simulation capabilities of available approaches.
△ Less
Submitted 18 February, 2014; v1 submitted 24 July, 2013;
originally announced July 2013.
-
Competing topological phases in few-layer graphene
Authors:
Pierre Carmier,
Oleksii Shevtsov,
Christoph Groth,
Xavier Waintal
Abstract:
We investigate the effect of spin-orbit coupling on the band structure of graphene-based two-dimensional Dirac fermion gases in the quantum Hall regime. Taking monolayer graphene as our first candidate, we show that a quantum phase transition between two distinct topological states -- the quantum Hall and the quantum spin Hall phases -- can be driven by simply tuning the Fermi level with a gate vo…
▽ More
We investigate the effect of spin-orbit coupling on the band structure of graphene-based two-dimensional Dirac fermion gases in the quantum Hall regime. Taking monolayer graphene as our first candidate, we show that a quantum phase transition between two distinct topological states -- the quantum Hall and the quantum spin Hall phases -- can be driven by simply tuning the Fermi level with a gate voltage. This transition is characterized by the existence of a chiral spin-polarized edge state propagating along the interface separating the two topological phases. We then apply our analysis to the more difficult case of bilayer graphene. Unlike in monolayer graphene, spin-orbit coupling by itself has indeed been predicted to be unsuccessful in driving bilayer graphene into a topological phase, due to the existence of an even number of pairs of spin-polarized edge states. While we show that this remains the case in the quantum Hall regime, we point out that by additionally breaking the layer inversion symmetry, a non-trivial quantum spin Hall phase can re-emerge in bilayer graphene at low energy. We consider two different symmetry-breaking mechanisms: inducing spin-orbit coupling only in the upper layer, and applying a perpendicular electric field. In both cases, the presence at low energy of an odd number of pairs of edge states can be driven by an exchange field. The related situation in trilayer graphene is also discussed.
△ Less
Submitted 28 November, 2012;
originally announced November 2012.
-
Graphene-based heterojunction between two topological insulators
Authors:
Oleksii Shevtsov,
Pierre Carmier,
Cyril Petitjean,
Christoph Groth,
David Carpentier,
Xavier Waintal
Abstract:
Quantum Hall (QH) and quantum spin Hall (QSH) phases have very different edge states and, when going from one phase to the other, the direction of one edge state must be reversed. We study this phenomena in graphene in presence of a strong perpendicular magnetic field on top of a spin-orbit (SO) induced QSH phase. We show that, below the SO gap, the QSH phase is virtually unaffected by the presenc…
▽ More
Quantum Hall (QH) and quantum spin Hall (QSH) phases have very different edge states and, when going from one phase to the other, the direction of one edge state must be reversed. We study this phenomena in graphene in presence of a strong perpendicular magnetic field on top of a spin-orbit (SO) induced QSH phase. We show that, below the SO gap, the QSH phase is virtually unaffected by the presence of the magnetic field. Above the SO gap, the QH phase is restored. An electrostatic gate placed on top of the system allows to create a QSH-QH junction which is characterized by the existence of a spin-polarized chiral state, propagating along the topological interface. We find that such a setup naturally provides an extremely sensitive spin-polarized current switch.
△ Less
Submitted 19 July, 2012; v1 submitted 24 January, 2012;
originally announced January 2012.
-
Tunable thermopower in a graphene-based topological insulator
Authors:
Oleksii Shevtsov,
Pierre Carmier,
Christoph Groth,
Xavier Waintal,
David Carpentier
Abstract:
Following the recent proposal by Weeks et al., which suggested that indium (or thallium) adatoms deposited on the surface of graphene should turn the latter into a quantum spin Hall (QSH) insulator characterized by a sizeable gap, we perform a systematic study of the transport properties of this system as a function of the density of randomly distributed adatoms. While the samples are, by construc…
▽ More
Following the recent proposal by Weeks et al., which suggested that indium (or thallium) adatoms deposited on the surface of graphene should turn the latter into a quantum spin Hall (QSH) insulator characterized by a sizeable gap, we perform a systematic study of the transport properties of this system as a function of the density of randomly distributed adatoms. While the samples are, by construction, very disordered, we find that they exhibit an extremely stable QSH phase with no signature of the spatial inhomogeneities of the adatom configuration. We find that a simple rescaling of the spin-orbit coupling parameter allows us to account for the behaviour of the inhomogeneous system using a homogeneous model. This robustness opens the route to a much easier experimental realization of this topological insulator. We additionally find this material to be a very promising candidate for thermopower generation with a target temperature tunable from 1 to 80K and an efficiency ZT close to 1.
△ Less
Submitted 26 June, 2012; v1 submitted 26 September, 2011;
originally announced September 2011.
-
Transmission probability through a Lévy glass and comparison with a Lévy walk
Authors:
C. W. Groth,
A. R. Akhmerov,
C. W. J. Beenakker
Abstract:
Recent experiments on the propagation of light over a distance L through a random packing of spheres with a power law distribution of radii (a socalled Lévy glass) have found that the transmission probability T \propto 1/L^γ scales superdiffusively (γ < 1). The data has been interpreted in terms of a Lévy walk. We present computer simulations to demonstrate that diffusive scaling (γ \approx 1) can…
▽ More
Recent experiments on the propagation of light over a distance L through a random packing of spheres with a power law distribution of radii (a socalled Lévy glass) have found that the transmission probability T \propto 1/L^γ scales superdiffusively (γ < 1). The data has been interpreted in terms of a Lévy walk. We present computer simulations to demonstrate that diffusive scaling (γ \approx 1) can coexist with a divergent second moment of the step size distribution (p(s) \propto 1/s^(1+α) with α < 2). This finding is in accord with analytical predictions for the effect of step size correlations, but deviates from what one would expect for a Lévy walk of independent steps.
△ Less
Submitted 14 January, 2012; v1 submitted 20 May, 2011;
originally announced May 2011.
-
Theory of the topological Anderson insulator
Authors:
C. W. Groth,
M. Wimmer,
A. R. Akhmerov,
J. Tworzydło,
C. W. J. Beenakker
Abstract:
We present an effective medium theory that explains the disorder-induced transition into a phase of quantized conductance, discovered in computer simulations of HgTe quantum wells. It is the combination of a random potential and quadratic corrections proportional to p^2 sigma_z to the Dirac Hamiltonian that can drive an ordinary band insulator into a topological insulator (having an inverted ban…
▽ More
We present an effective medium theory that explains the disorder-induced transition into a phase of quantized conductance, discovered in computer simulations of HgTe quantum wells. It is the combination of a random potential and quadratic corrections proportional to p^2 sigma_z to the Dirac Hamiltonian that can drive an ordinary band insulator into a topological insulator (having an inverted band gap). We calculate the location of the phase boundary at weak disorder and show that it corresponds to the crossing of a band edge rather than a mobility edge. Our mechanism for the formation of a topological Anderson insulator is generic, and would apply as well to three-dimensional semiconductors with strong spin-orbit coupling.
△ Less
Submitted 20 October, 2009; v1 submitted 6 August, 2009;
originally announced August 2009.
-
Switching of electrical current by spin precession in the first Landau level of an inverted-gap semiconductor
Authors:
A. R. Akhmerov,
C. W. Groth,
J. Tworzydlo,
C. W. J. Beenakker
Abstract:
We show how the quantum Hall effect in an inverted-gap semiconductor (with electron- and hole-like states at the conduction- and valence-band edges interchanged) can be used to inject, precess, and detect the electron spin along a one-dimensional pathway. The restriction of the electron motion to a single spatial dimension ensures that all electrons experience the same amount of precession in a…
▽ More
We show how the quantum Hall effect in an inverted-gap semiconductor (with electron- and hole-like states at the conduction- and valence-band edges interchanged) can be used to inject, precess, and detect the electron spin along a one-dimensional pathway. The restriction of the electron motion to a single spatial dimension ensures that all electrons experience the same amount of precession in a parallel magnetic field, so that the full electrical current can be switched on and off. As an example, we calculate the magnetoconductance of a p-n interface in a HgTe quantum well and show how it can be used to measure the spin precession due to bulk inversion asymmetry.
△ Less
Submitted 27 October, 2009; v1 submitted 12 June, 2009;
originally announced June 2009.
-
Nonalgebraic length dependence of transmission through a chain of barriers with a Levy spacing distribution
Authors:
C. W. J. Beenakker,
C. W. Groth,
A. R. Akhmerov
Abstract:
The recent realization of a "Levy glass" (a three-dimensional optical material with a Levy distribution of scattering lengths) has motivated us to analyze its one-dimensional analogue: A linear chain of barriers with independent spacings s that are Levy distributed: p(s)~1/s^(1+alpha) for s to infinity. The average spacing diverges for 0<alpha<1. A random walk along such a sparse chain is not a…
▽ More
The recent realization of a "Levy glass" (a three-dimensional optical material with a Levy distribution of scattering lengths) has motivated us to analyze its one-dimensional analogue: A linear chain of barriers with independent spacings s that are Levy distributed: p(s)~1/s^(1+alpha) for s to infinity. The average spacing diverges for 0<alpha<1. A random walk along such a sparse chain is not a Levy walk because of the strong correlations of subsequent step sizes. We calculate all moments of conductance (or transmission), in the regime of incoherent sequential tunneling through the barriers. The average transmission from one barrier to a point at a distance L scales as L^(-alpha) ln L for 0<alpha<1. The corresponding electronic shot noise has a Fano factor (average noise power / average conductance) that approaches 1/3 very slowly, with 1/ln L corrections.
△ Less
Submitted 6 January, 2009; v1 submitted 3 November, 2008;
originally announced November 2008.
-
Finite difference method for transport properties of massless Dirac fermions
Authors:
J. Tworzydlo,
C. W. Groth,
C. W. J. Beenakker
Abstract:
We adapt a finite difference method of solution of the two-dimensional massless Dirac equation, developed in the context of lattice gauge theory, to the calculation of electrical conduction in a graphene sheet or on the surface of a topological insulator. The discretized Dirac equation retains a single Dirac point (no "fermion doubling"), avoids intervalley scattering as well as trigonal war**…
▽ More
We adapt a finite difference method of solution of the two-dimensional massless Dirac equation, developed in the context of lattice gauge theory, to the calculation of electrical conduction in a graphene sheet or on the surface of a topological insulator. The discretized Dirac equation retains a single Dirac point (no "fermion doubling"), avoids intervalley scattering as well as trigonal war**, and preserves the single-valley time reversal symmetry (= symplectic symmetry) at all length scales and energies -- at the expense of a nonlocal finite difference approximation of the differential operator. We demonstrate the symplectic symmetry by calculating the scaling of the conductivity with sample size, obtaining the logarithmic increase due to antilocalization. We also calculate the sample-to-sample conductance fluctuations as well as the shot noise power, and compare with analytical predictions.
△ Less
Submitted 27 October, 2008;
originally announced October 2008.
-
Electronic shot noise in fractal conductors
Authors:
C. W. Groth,
J. Tworzydlo,
C. W. J. Beenakker
Abstract:
By solving a master equation in the Sierpinski lattice and in a planar random-resistor network, we determine the scaling with size L of the shot noise power P due to elastic scattering in a fractal conductor. We find a power-law scaling P ~ L^(d_f-2-alpha), with an exponent depending on the fractal dimension d_f and the anomalous diffusion exponent alpha. This is the same scaling as the time-ave…
▽ More
By solving a master equation in the Sierpinski lattice and in a planar random-resistor network, we determine the scaling with size L of the shot noise power P due to elastic scattering in a fractal conductor. We find a power-law scaling P ~ L^(d_f-2-alpha), with an exponent depending on the fractal dimension d_f and the anomalous diffusion exponent alpha. This is the same scaling as the time-averaged current I, which implies that the Fano factor F=P/2eI is scale independent. We obtain a value F=1/3 for anomalous diffusion that is the same as for normal diffusion, even if there is no smallest length scale below which the normal diffusion equation holds. The fact that F remains fixed at 1/3 as one crosses the percolation threshold in a random-resistor network may explain recent measurements of a do**-independent Fano factor in a graphene flake.
△ Less
Submitted 18 March, 2008;
originally announced March 2008.
-
Counting statistics of coherent population trap** in quantum dots
Authors:
C. W. Groth,
B. Michaelis,
C. W. J. Beenakker
Abstract:
Destructive interference of single-electron tunneling between three quantum dots can trap an electron in a coherent superposition of charge on two of the dots. Coupling to external charges causes decoherence of this superposition, and in the presence of a large bias voltage each decoherence event transfers a certain number of electrons through the device. We calculate the counting statistics of…
▽ More
Destructive interference of single-electron tunneling between three quantum dots can trap an electron in a coherent superposition of charge on two of the dots. Coupling to external charges causes decoherence of this superposition, and in the presence of a large bias voltage each decoherence event transfers a certain number of electrons through the device. We calculate the counting statistics of the transferred charges, finding a crossover from sub-Poissonian to super-Poissonian statistics with increasing ratio of tunnel and decoherence rates.
△ Less
Submitted 25 May, 2007; v1 submitted 25 May, 2006;
originally announced May 2006.
