-
Observation of SOMO-HOMO inversion in a polycyclic conjugated hydrocarbon
Authors:
Shantanu Mishra,
Manuel Vilas-Varela,
Shadi Fatayer,
Florian Albrecht,
Diego Peña,
Leo Gross
Abstract:
We report the generation of a non-benzenoid polycyclic conjugated hydrocarbon, which consists of a biphenyl moiety substituted by indenyl units at the 4,4' positions, on ultra-thin sodium chloride films by tip-induced chemistry. Single-molecule characterization by scanning tunneling and atomic force microscopy reveals an open-shell biradical ground state, with a peculiar electronic configuration w…
▽ More
We report the generation of a non-benzenoid polycyclic conjugated hydrocarbon, which consists of a biphenyl moiety substituted by indenyl units at the 4,4' positions, on ultra-thin sodium chloride films by tip-induced chemistry. Single-molecule characterization by scanning tunneling and atomic force microscopy reveals an open-shell biradical ground state, with a peculiar electronic configuration wherein the singly-occupied molecular orbitals (SOMOs) are lower in energy than the highest occupied molecular orbital (HOMO).
△ Less
Submitted 3 March, 2024;
originally announced March 2024.
-
Deriving Rewards for Reinforcement Learning from Symbolic Behaviour Descriptions of Bipedal Walking
Authors:
Daniel Harnack,
Christoph Lüth,
Lukas Gross,
Shivesh Kumar,
Frank Kirchner
Abstract:
Generating physical movement behaviours from their symbolic description is a long-standing challenge in artificial intelligence (AI) and robotics, requiring insights into numerical optimization methods as well as into formalizations from symbolic AI and reasoning. In this paper, a novel approach to finding a reward function from a symbolic description is proposed. The intended system behaviour is…
▽ More
Generating physical movement behaviours from their symbolic description is a long-standing challenge in artificial intelligence (AI) and robotics, requiring insights into numerical optimization methods as well as into formalizations from symbolic AI and reasoning. In this paper, a novel approach to finding a reward function from a symbolic description is proposed. The intended system behaviour is modelled as a hybrid automaton, which reduces the system state space to allow more efficient reinforcement learning. The approach is applied to bipedal walking, by modelling the walking robot as a hybrid automaton over state space orthants, and used with the compass walker to derive a reward that incentivizes following the hybrid automaton cycle. As a result, training times of reinforcement learning controllers are reduced while final walking speed is increased. The approach can serve as a blueprint how to generate reward functions from symbolic AI and reasoning.
△ Less
Submitted 16 December, 2023;
originally announced December 2023.
-
Bistability between $π$-diradical open-shell and closed-shell states in indeno[1,2-a]fluorene
Authors:
Shantanu Mishra,
Manuel Vilas-Varela,
Leonard-Alexander Lieske,
Ricardo Ortiz,
Shadi Fatayer,
Igor Rončević,
Florian Albrecht,
Thomas Frederiksen,
Diego Peña,
Leo Gross
Abstract:
Indenofluorenes are non-benzenoid conjugated hydrocarbons that have received great interest owing to their unusual electronic structure and potential applications in non-linear optics and photovoltaics. Here, we report the generation of unsubstituted indeno[1,2-a]fluorene, the final and yet unreported parent indenofluorene isomer, on various surfaces by cleavage of two C-H bonds in 7,12-dihydroind…
▽ More
Indenofluorenes are non-benzenoid conjugated hydrocarbons that have received great interest owing to their unusual electronic structure and potential applications in non-linear optics and photovoltaics. Here, we report the generation of unsubstituted indeno[1,2-a]fluorene, the final and yet unreported parent indenofluorene isomer, on various surfaces by cleavage of two C-H bonds in 7,12-dihydroindeno[1,2-a]fluorene through voltage pulses applied by the tip of a combined scanning tunneling microscope and atomic force microscope. On bilayer NaCl on Au(111), indeno[1,2-a]fluorene is in the neutral charge state, while it exhibits charge bistability between neutral and anionic states on the lower work function surfaces of bilayer NaCl on Ag(111) and Cu(111). In the neutral state, indeno[1,2-a]fluorene exhibits either of two ground states: an open-shell pi-diradical state, predicted to be a triplet by density functional and multireference many-body perturbation theory calculations, or a closed-shell state with a para-quinodimethane moiety in the as-indacene core. Switching between open- and closed-shell states of a single molecule is observed by changing its adsorption site on NaCl.
△ Less
Submitted 11 August, 2023; v1 submitted 8 March, 2023;
originally announced March 2023.
-
Analytic Estimation of Region of Attraction of an LQR Controller for Torque Limited Simple Pendulum
Authors:
Lukas Gross,
Lasse Maywald,
Shivesh Kumar,
Frank Kirchner,
Christoph Lüth
Abstract:
Linear-quadratic regulators (LQR) are a well known and widely used tool in control theory for both linear and nonlinear dynamics. For nonlinear problems, an LQR-based controller is usually only locally viable, thus, raising the problem of estimating the region of attraction (ROA). The need for good ROA estimations becomes especially pressing for underactuated systems, as a failure of controls migh…
▽ More
Linear-quadratic regulators (LQR) are a well known and widely used tool in control theory for both linear and nonlinear dynamics. For nonlinear problems, an LQR-based controller is usually only locally viable, thus, raising the problem of estimating the region of attraction (ROA). The need for good ROA estimations becomes especially pressing for underactuated systems, as a failure of controls might lead to unsafe and unrecoverable system states. Known approaches based on optimization or sampling, while working well, might be too slow in time critical applications and are hard to verify formally. In this work, we propose a novel approach to estimate the ROA based on the analytic solutions to linear ODEs for the torque limited simple pendulum. In simulation and physical experiments, we compared our approach to a Lyapunov-sampling baseline approach and found that our approach was faster to compute, while yielding ROA estimations of similar phase space area.
△ Less
Submitted 28 November, 2022;
originally announced November 2022.
-
Charge-state lifetimes of single molecules on ultrathin insulating films
Authors:
Katharina Kaiser,
Leonard-Alexander Lieske,
Jascha Repp,
Leo Gross
Abstract:
In scanning tunneling microscopy (STM) experiments of molecules on insulating films, tunneling through molecular resonances implies transiently charging the molecule. The transition back to the charge ground state by tunneling through the insulating film is crucial, for example, for understanding STM-induced electroluminescence. Here, using STM, we report on the charge-state lifetimes of individua…
▽ More
In scanning tunneling microscopy (STM) experiments of molecules on insulating films, tunneling through molecular resonances implies transiently charging the molecule. The transition back to the charge ground state by tunneling through the insulating film is crucial, for example, for understanding STM-induced electroluminescence. Here, using STM, we report on the charge-state lifetimes of individual molecules adsorbed on NaCl films of different thicknesses on Cu(111) and Au(111). To that end, we approached the tip to the molecule at resonant tunnel conditions up to a regime where charge transport was limited by tunneling through the NaCl film. The resulting saturation of tunnel current is a direct measure of the molecule's charge-state lifetime, thus providing a means to study charge dynamics and, thereby, exciton dynamics. Comparison of anion and cation lifetimes on different substrates reveals the critical role of the level alignment with the insulator's conduction and valence band, and the metal-insulator interface state.
△ Less
Submitted 14 June, 2023; v1 submitted 2 November, 2022;
originally announced November 2022.
-
Selectivity in single-molecule reactions by tip-induced redox chemistry
Authors:
Florian Albrecht,
Shadi Fatayer,
Iago Pozo,
Ivano Tavernelli,
Jascha Repp,
Diego Peña,
Leo Gross
Abstract:
Controlling selectivity of reactions is a quest in chemistry. Here, we demonstrate reversible and selective bond formation and dissociation promoted by tip-induced reduction-oxidation reactions on a surface. Molecular rearrangements leading to different constitutional isomers are selected by the polarity and magnitude of applied voltage pulses from the tip of a combined scanning tunneling and atom…
▽ More
Controlling selectivity of reactions is a quest in chemistry. Here, we demonstrate reversible and selective bond formation and dissociation promoted by tip-induced reduction-oxidation reactions on a surface. Molecular rearrangements leading to different constitutional isomers are selected by the polarity and magnitude of applied voltage pulses from the tip of a combined scanning tunneling and atomic force microscope. Characterization of voltage dependence of the reactions and determination of reaction rates demonstrate selectivity in constitutional isomerization reactions and provide insight into the underlying mechanisms. With support of density functional theory calculations, we find that the energy landscape of the isomers in different charge states is important to rationalize the selectivity. Tip-induced selective single-molecule reactions increase our understanding of redox chemistry and could lead to novel molecular machines.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
Copper migration and surface oxidation of $\text{Cu}_{x}\text{Bi}_2\text{Se}_3$ in ambient pressure environments
Authors:
Adam L. Gross,
Lorenz Falling,
Matthew C. Staab,
Metzli I. Montero,
Rahim R. Ullah,
David M. Nisson,
Peter Klavins,
Kristie J. Koski,
Nicholas J. Curro,
Valentin Taufour,
Slavomir Nemsak,
Inna M. Vishik
Abstract:
Chemical modifications such as intercalation can be used to modify surface properties or to further functionalize the surface states of topological insulators. Using ambient pressure X-ray photoelectron spectroscopy, we report copper migration in $\text{Cu}_{x}\text{Bi}_2\text{Se}_3$, which occurs on a timescale of hours to days after initial surface cleaving. The increase in near-surface copper p…
▽ More
Chemical modifications such as intercalation can be used to modify surface properties or to further functionalize the surface states of topological insulators. Using ambient pressure X-ray photoelectron spectroscopy, we report copper migration in $\text{Cu}_{x}\text{Bi}_2\text{Se}_3$, which occurs on a timescale of hours to days after initial surface cleaving. The increase in near-surface copper proceeds along with the oxidation of the sample surface and large changes in the selenium content. These complex changes are further modelled with core-level spectroscopy simulations, which suggest a composition gradient near the surface which develops with oxygen exposure. Our results shed light on a new phenomenon that must be considered for intercalated topological insulators$\unicode{x2014}$and intercalated materials in general$\unicode{x2014}$that surface chemical composition can change when specimens are exposed to ambient conditions.
△ Less
Submitted 8 July, 2022;
originally announced July 2022.
-
Non-benzenoid high-spin polycyclic hydrocarbons generated by atom manipulation
Authors:
Shantanu Mishra,
Shadi Fatayer,
Saleta Fernandez,
Katharina Kaiser,
Diego Pena,
Leo Gross
Abstract:
We report the on-surface synthesis of a non-benzenoid triradical through dehydrogenation of truxene (C27H18) on coinage metal and insulator surfaces. Voltage pulses applied via the tip of a combined scanning tunneling microscope/atomic force microscope were used to cleave individual C-H bonds in truxene. The resultant final product truxene-5,10,15-triyl (1) was characterized at the single-molecule…
▽ More
We report the on-surface synthesis of a non-benzenoid triradical through dehydrogenation of truxene (C27H18) on coinage metal and insulator surfaces. Voltage pulses applied via the tip of a combined scanning tunneling microscope/atomic force microscope were used to cleave individual C-H bonds in truxene. The resultant final product truxene-5,10,15-triyl (1) was characterized at the single-molecule scale using a combination of atomic force microscopy, scanning tunneling microscopy and scanning tunneling spectroscopy. Our analyses show that 1 retains its open-shell quartet ground state, predicted by density functional theory, on a two monolayer-thick NaCl layer on a Cu(111) surface. We image the frontier orbital densities of 1 and confirm that they correspond to spin-split singly occupied molecular orbitals. Through our synthetic strategy, we also isolate two reactive intermediates toward the synthesis of 1 - derivatives of fluorenyl radical and indeno[1,2-a]fluorene, with predicted spin-doublet and spin-triplet ground states, respectively. Our results should have bearings on the synthesis of non-benzenoid high-spin polycyclic frameworks with magnetism beyond Lieb's theorem.
△ Less
Submitted 1 February, 2022;
originally announced February 2022.
-
Electronic structure and topology across $T_c$ in magnetic Weyl semimetal Co$_3$Sn$_2$S$_2$
Authors:
Antonio Rossi,
Vsevolod Ivanov,
Sudheer Sreedhar,
Adam L. Gross,
Zihao Shen,
Eli Rotenberg,
Aaron Bostwick,
Chris Jozwiak,
Valentin Taufour,
Sergey Y. Savrasov,
Inna M. Vishik
Abstract:
Co$_3$Sn$_2$S$_2$ is a magnetic Weyl semimetal, in which ferromagnetic ordering at 177K is predicted to stabilize Weyl points. We perform temperature and spatial dependent angle--resolved photoemission spectroscopy measurements through the Curie temperature ($T_c$), which show large band shifts and renormalization concomitant with the onset of magnetism. We argue that Co$_3$Sn$_2$S$_2$ evolves fro…
▽ More
Co$_3$Sn$_2$S$_2$ is a magnetic Weyl semimetal, in which ferromagnetic ordering at 177K is predicted to stabilize Weyl points. We perform temperature and spatial dependent angle--resolved photoemission spectroscopy measurements through the Curie temperature ($T_c$), which show large band shifts and renormalization concomitant with the onset of magnetism. We argue that Co$_3$Sn$_2$S$_2$ evolves from a Mott ferromagnet below $T_c$ to a correlated metallic state above $T_c$. To understand the magnetism, we derive a tight-binding model of Co-$3d_{x^2-y^2}$ orbitals on the kagome lattice. At the filling obtained by first-principles calculations, this model reproduces the ferromagnetic ground state, and results in the reduction of Coulomb interactions due to cluster effects. Using a disordered local moment simulation, we show how this reduced Hubbard-$U$ leads to a collapse of the bands across the magnetic transition, resulting in a correlated state which carries associated characteristic photoemission signatures that are distinct from those of a simple lifting of exchange splitting. The behavior of topology across $T_c$ is discussed in the context of this description of the magnetism.
△ Less
Submitted 21 October, 2021; v1 submitted 18 May, 2021;
originally announced May 2021.
-
Boosting Memory Access Locality of the Spectral Element Method with Hilbert Space-Filling Curves
Authors:
Roger R. F. Araújo,
Lutz Gross,
Samuel Xavier-de-Souza
Abstract:
We propose an algorithm based on Hilbert space-filling curves to reorder mesh elements in memory for use with the Spectral Element Method, aiming to attain fewer cache misses, better locality of data reference and faster execution. We present a technique to numerically simulate acoustic wave propagation in 2D domains using the Spectral Element Method, and discuss computational performance aspects…
▽ More
We propose an algorithm based on Hilbert space-filling curves to reorder mesh elements in memory for use with the Spectral Element Method, aiming to attain fewer cache misses, better locality of data reference and faster execution. We present a technique to numerically simulate acoustic wave propagation in 2D domains using the Spectral Element Method, and discuss computational performance aspects of this procedure. We reorder mesh-related data via Hilbert curves to achieve sizable reductions in execution time under several mesh configurations in shared-memory systems. Our experiments show that the Hilbert curve approach works well with meshes of several granularities and also with small and large variations in element sizes, achieving reductions between 9% and 25% in execution time when compared to three other ordering schemes.
△ Less
Submitted 16 April, 2021;
originally announced April 2021.
-
NOELLE Offers Empowering LLVM Extensions
Authors:
Angelo Matni,
Enrico Armenio Deiana,
Yian Su,
Lukas Gross,
Souradip Ghosh,
Sotiris Apostolakis,
Ziyang Xu,
Zujun Tan,
Ishita Chaturvedi,
David I. August,
Simone Campanoni
Abstract:
Modern and emerging architectures demand increasingly complex compiler analyses and transformations. As the emphasis on compiler infrastructure moves beyond support for peephole optimizations and the extraction of instruction-level parallelism, they should support custom tools designed to meet these demands with higher-level analysis-powered abstractions of wider program scope. This paper introduc…
▽ More
Modern and emerging architectures demand increasingly complex compiler analyses and transformations. As the emphasis on compiler infrastructure moves beyond support for peephole optimizations and the extraction of instruction-level parallelism, they should support custom tools designed to meet these demands with higher-level analysis-powered abstractions of wider program scope. This paper introduces NOELLE, a robust open-source domain-independent compilation layer built upon LLVM providing this support. NOELLE is modular and demand-driven, making it easy-to-extend and adaptable to custom-tool-specific needs without unduly wasting compile time and memory. This paper shows the power of NOELLE by presenting a diverse set of ten custom tools built upon it, with a 33.2% to 99.2% reduction in code size (LoC) compared to their counterparts without NOELLE.
△ Less
Submitted 9 February, 2021;
originally announced February 2021.
-
Probing molecular excited states by atomic force microscopy
Authors:
Shadi Fatayer,
Florian Albrecht,
Ivano Tavernelli,
Mats Persson,
Nikolaj Moll,
Leo Gross
Abstract:
By employing single charge injections with an atomic force microscope, we investigated redox reactions of a molecule on a multilayer insulating film. First, we charged the molecule positively by attaching a single hole. Then we neutralized it by attaching an electron and observed three channels for the neutralization. We rationalize that the three channels correspond to transitions to the neutral…
▽ More
By employing single charge injections with an atomic force microscope, we investigated redox reactions of a molecule on a multilayer insulating film. First, we charged the molecule positively by attaching a single hole. Then we neutralized it by attaching an electron and observed three channels for the neutralization. We rationalize that the three channels correspond to transitions to the neutral ground state, to the lowest energy triplet excited states and to the lowest energy singlet excited states. By single-electron tunneling spectroscopy we measured the energy differences between the transitions obtaining triplet and singlet excited state energies. The experimental values are compared with density functional theory calculations of the excited state energies. Our results show that molecules in excited states can be prepared and that energies of optical gaps can be quantified by controlled single-charge injections. Our work demonstrates the access to, and provides insight into, ubiquitous electron-attachment processes related to excited-state transitions important in electron transfer and molecular optoelectronics phenomena on surfaces.
△ Less
Submitted 19 November, 2020;
originally announced November 2020.
-
Industry-scale IR-based Bug Localization: A Perspective from Facebook
Authors:
Vijayaraghavan Murali,
Lee Gross,
Rebecca Qian,
Satish Chandra
Abstract:
We explore the application of Information Retrieval (IR) based bug localization methods at a large industrial setting, Facebook. Facebook's code base evolves rapidly, with thousands of code changes being committed to a monolithic repository every day. When a bug is detected, it is often time-sensitive and imperative to identify the commit causing the bug in order to either revert it or fix it. Thi…
▽ More
We explore the application of Information Retrieval (IR) based bug localization methods at a large industrial setting, Facebook. Facebook's code base evolves rapidly, with thousands of code changes being committed to a monolithic repository every day. When a bug is detected, it is often time-sensitive and imperative to identify the commit causing the bug in order to either revert it or fix it. This is complicated by the fact that bugs often manifest with complex and unwieldy features, such as stack traces and other metadata. Code commits also have various features associated with them, ranging from developer comments to test results. This poses unique challenges to bug localization methods, making it a highly non-trivial operation.
In this paper we lay out several practical concerns for industry-level IR-based bug localization, and propose Bug2Commit, a tool that is designed to address these concerns. We also assess the effectiveness of existing IR-based localization techniques from the software engineering community, and find that in the presence of complex queries or documents, which are common at Facebook, existing approaches do not perform as well as Bug2Commit. We evaluate Bug2Commit on three applications at Facebook: client-side crashes from the mobile app, server-side performance regressions, and mobile simulation tests for performance. We find that Bug2Commit outperforms the accuracy of existing approaches by up to 17%, leading to reduced time for triaging regressions and attributing bugs found in simulations.
△ Less
Submitted 17 March, 2021; v1 submitted 19 October, 2020;
originally announced October 2020.
-
Intramolecular coupling of terminal alkynes by atom manipulation
Authors:
Florian Albrecht,
Dulce Rey,
Shadi Fatayer,
Fabian Schulz,
Dolores Pérez,
Diego Peña,
Leo Gross
Abstract:
Glaser-like coupling of terminal alkynes by thermal activation is extensively used in on-surface chemistry. Here we demonstrate an intramolecular version of this reaction performed by atom manipulation. We used voltage pulses from the tip to trigger a Glaser-like coupling between terminal alkyne carbons within a custom synthesized precursor molecule adsorbed on bilayer NaCl on Cu(111). Different c…
▽ More
Glaser-like coupling of terminal alkynes by thermal activation is extensively used in on-surface chemistry. Here we demonstrate an intramolecular version of this reaction performed by atom manipulation. We used voltage pulses from the tip to trigger a Glaser-like coupling between terminal alkyne carbons within a custom synthesized precursor molecule adsorbed on bilayer NaCl on Cu(111). Different conformations of the precursor molecule and the product were characterized by molecular structure elucidation with atomic force microscopy and orbital density map** with scanning tunneling microscopy, accompanied by density functional theory calculations. We revealed partially dehydrogenated intermediates providing insight into the reaction pathway.
△ Less
Submitted 24 August, 2020; v1 submitted 14 August, 2020;
originally announced August 2020.
-
Nanosecond dynamics in intrinsic topological insulator $\text{Bi}_{2-x}\text{Sb}_x\text{Se}_3$ revealed by time-resolved optical reflectivity
Authors:
Adam L. Gross,
Yasen Hou,
Antonio Rossi,
Dong Yu,
Inna M. Vishik
Abstract:
$\text{Bi}_2\text{Se}_3$ is an ideal three-dimensional topological insulator in which the chemical potential can be brought into the bulk band gap with antimony do**. Here, we utilize ultrafast time-resolved transient reflectivity to characterize the photoexcited carrier decay in $\text{Bi}_{2-x}\text{Sb}_x\text{Se}_3…
▽ More
$\text{Bi}_2\text{Se}_3$ is an ideal three-dimensional topological insulator in which the chemical potential can be brought into the bulk band gap with antimony do**. Here, we utilize ultrafast time-resolved transient reflectivity to characterize the photoexcited carrier decay in $\text{Bi}_{2-x}\text{Sb}_x\text{Se}_3$ nanoplatelets. We report a substantial slowing of the bulk carrier relaxation time in bulk-insulating $\text{Bi}_{2-x}\text{Sb}_x\text{Se}_3$ nanoplatelets as compared to $n$-type bulk-metallic $\text{Bi}_2\text{Se}_3$ at low temperatures, which approaches $3.3 \text{ ns}$ in the zero pump fluence limit. This long-lived decay is correlated across different fluences and antimony concentrations, revealing unique decay dynamics not present in $n$-type $\text{Bi}_2\text{Se}_3$, namely the slow bimolecular recombination of bulk carriers.
△ Less
Submitted 26 January, 2021; v1 submitted 28 May, 2020;
originally announced May 2020.
-
An sp-hybridized molecular carbon allotrope, cyclo[18]carbon
Authors:
Katharina Kaiser,
Lorel M. Scriven,
Fabian Schulz,
Przemyslaw Gawel,
Leo Gross,
Harry L. Anderson
Abstract:
Carbon allotropes built from rings of two-coordinate atoms, known as cyclo[n]carbons, have fascinated chemists for many years, but until now they could not be isolated or structurally characterized, due to their high reactivity. We generated cyclo[18]carbon (C18) using atom manipulation on bilayer NaCl on Cu(111) at 5 Kelvin by eliminating carbon monoxide from a cyclocarbon oxide molecule C24O6. C…
▽ More
Carbon allotropes built from rings of two-coordinate atoms, known as cyclo[n]carbons, have fascinated chemists for many years, but until now they could not be isolated or structurally characterized, due to their high reactivity. We generated cyclo[18]carbon (C18) using atom manipulation on bilayer NaCl on Cu(111) at 5 Kelvin by eliminating carbon monoxide from a cyclocarbon oxide molecule C24O6. Characterization of cyclo[18]carbon by high-resolution atomic force microscopy revealed a polyynic structure with defined positions of alternating triple and single bonds. The high reactivity of cyclocarbon and cyclocarbon oxides allows covalent coupling between molecules to be induced by atom manipulation, opening an avenue for the synthesis of other carbon allotropes and carbon-rich materials from the coalescence of cyclocarbon molecules.
△ Less
Submitted 16 August, 2019;
originally announced August 2019.
-
Molecular structure elucidation with charge-state control
Authors:
Shadi Fatayer,
Florian Albrecht,
Yunlong Zhang,
Darius Urbonas,
Diego Peña,
Nikolaj Moll,
Leo Gross
Abstract:
The charge state of a molecule governs its physicochemical properties, such as conformation, reactivity and aromaticity, with implications for on-surface synthesis, catalysis, photo conversion and applications in molecular electronics. On insulating, multilayer NaCl films we control the charge state of organic molecules and resolve their structures in neutral, cationic, anionic and dianionic state…
▽ More
The charge state of a molecule governs its physicochemical properties, such as conformation, reactivity and aromaticity, with implications for on-surface synthesis, catalysis, photo conversion and applications in molecular electronics. On insulating, multilayer NaCl films we control the charge state of organic molecules and resolve their structures in neutral, cationic, anionic and dianionic states by atomic force microscopy, obtaining atomic resolution and bond-order discrimination using CO functionalized tips. We detect changes in conformation, adsorption geometry and bond-order relations for azobenzene, tetracyanoquinodimethane and pentacene in multiple charge states. Moreover, for porphine we investigate the charge-state-dependent change of aromaticity and conjugation pathway in the macrocycle. This work opens the way to studying chemical-structural changes of individual molecules for a wide range of charge states.
△ Less
Submitted 19 July, 2019; v1 submitted 13 July, 2019;
originally announced July 2019.
-
Equivalence of helicity and Euclidean self-duality for gauge fields
Authors:
Leonard Gross
Abstract:
In the canonical formalism for the free electromagnetic field a solution to Maxwell's equations is customarily identified with its initial gauge potential (in Coulomb gauge) and initial electric field, which together determine a point in phase space. The solutions to Maxwell's equations, all of whose plane waves in their plane wave expansions have positive helicity, thereby determine a subspace of…
▽ More
In the canonical formalism for the free electromagnetic field a solution to Maxwell's equations is customarily identified with its initial gauge potential (in Coulomb gauge) and initial electric field, which together determine a point in phase space. The solutions to Maxwell's equations, all of whose plane waves in their plane wave expansions have positive helicity, thereby determine a subspace of phase space. We will show that this subspace consists of initial gauge potentials which lie in the positive spectral subspace of the operator curl together with initial electric fields conjugate to such potentials. Similarly for negative helicity. Helicity is thereby characterized by the spectral subspaces of curl in configuration space. A gauge potential on three-space has a Poisson extension to a four dimensional Euclidean half space, defined as the solution to the Maxwell-Poisson equation whose initial data is the given gauge potential. We will show that the extension is anti-self dual if and only if the gauge potential lies in the positive spectral subspace of curl. Similarly for self dual extension and negative spectral subspace. Helicity is thereby characterized for a normalizable electromagnetic field by the canonical formalism and (anti-)self duality.
For a non-abelian gauge field on Minkowski space a plane wave expansion is not gauge invariant. Nor is the notion of positive spectral subspace of curl. But if one replaces the Maxwell-Poisson equation by the Yang-Mills-Poisson equation then (anti-)self duality on the Euclidean side induces a decomposition of (now non-linear) configuration space similar to that in the electromagnetic case. The strong analogy suggests a gauge invariant definition of helicity for non-abelian gauge fields. We will provide further support for this view.
△ Less
Submitted 17 November, 2018;
originally announced November 2018.
-
Stability of the Yang-Mills heat equation for finite action
Authors:
Leonard Gross
Abstract:
The existence and uniqueness of solutions to the Yang-Mills heat equation over domains in Euclidean three space was proven in a previous paper for initial data lying in the Sobolev space of order one-half, which is the critical Sobolev index for this equation. In the present paper the stability of these solutions will be established. The variational equation, which is only weakly parabolic, and ha…
▽ More
The existence and uniqueness of solutions to the Yang-Mills heat equation over domains in Euclidean three space was proven in a previous paper for initial data lying in the Sobolev space of order one-half, which is the critical Sobolev index for this equation. In the present paper the stability of these solutions will be established. The variational equation, which is only weakly parabolic, and has highly singular coefficients, will be shown to have unique strong solutions up to addition of a vertical solution. Initial data will be taken to be in Sobolev class one-half. The proof relies on an infinitesimal version of the ZDS procedure: one solves first an augmented, strictly parabolic version of the variational equation and then adds to the solution a function which is vertical along the original path. Energy inequalities and Neumann domination techniques will be used to establish apriori initial behavior for solutions.
△ Less
Submitted 31 October, 2017;
originally announced November 2017.
-
Passivation of dangling bonds on hydrogenated Si(100)-2$\times$1: a possible method for error correction in hydrogen lithography
Authors:
Niko Pavliček,
Zsolt Majzik,
Gerhard Meyer,
Leo Gross
Abstract:
Using combined low temperature scanning tunneling microscopy (STM) and atomic force microscopy (AFM), we demonstrate hydrogen passivation of individual, selected dangling bonds (DBs) on a hydrogen-passivated Si(100)-2$\times$1 surface (H-Si) by atom manipulation. This method allows erasing of DBs and thus provides an error-correction scheme for hydrogen lithography. Si-terminated tips (Si tips) fo…
▽ More
Using combined low temperature scanning tunneling microscopy (STM) and atomic force microscopy (AFM), we demonstrate hydrogen passivation of individual, selected dangling bonds (DBs) on a hydrogen-passivated Si(100)-2$\times$1 surface (H-Si) by atom manipulation. This method allows erasing of DBs and thus provides an error-correction scheme for hydrogen lithography. Si-terminated tips (Si tips) for hydrogen desorption and H-terminated tips (H tips) for hydrogen passivation are both created by deliberate contact to the H-Si surface and are assigned by their characteristic contrast in AFM. DB passivation is achieved by transferring the H atom that is at the apex of an H tip to the DB, reestablishing a locally defect-free H-Si surface.
△ Less
Submitted 9 June, 2017; v1 submitted 6 June, 2017;
originally announced June 2017.
-
Atomic and Electronic Structure of Si Dangling Bonds in Quasi-Free-Standing Monolayer Graphene
Authors:
Yuya Murata,
Tommaso Cavallucci,
Valentina Tozzini,
Niko Pavliček,
Leo Gross,
Gerhard Meyer,
Makoto Takamura,
Hiroki Hibino,
Fabio Beltram,
Stefan Heun
Abstract:
Si dangling bonds without H termination at the interface of quasi-free standing monolayer graphene (QFMLG) are known scattering centers that can severely affect carrier mobility. In this report, we study the atomic and electronic structure of Si dangling bonds in QFMLG using low-temperature scanning tunneling microscopy/spectroscopy (STM/STS), atomic force microscopy (AFM), and density functional…
▽ More
Si dangling bonds without H termination at the interface of quasi-free standing monolayer graphene (QFMLG) are known scattering centers that can severely affect carrier mobility. In this report, we study the atomic and electronic structure of Si dangling bonds in QFMLG using low-temperature scanning tunneling microscopy/spectroscopy (STM/STS), atomic force microscopy (AFM), and density functional theory (DFT) calculations. Two types of defects with different contrast were observed on a flat terrace by STM and AFM. Their STM contrast varies with bias voltage. In STS, they showed characteristic peaks at different energies, 1.1 and 1.4 eV. Comparison with DFT calculations indicates that they correspond to clusters of 3 and 4 Si dangling bonds, respectively. The relevance of these results for the optimization of graphene synthesis is discussed.
△ Less
Submitted 5 June, 2017;
originally announced June 2017.
-
Test Beam Performance Measurements for the Phase I Upgrade of the CMS Pixel Detector
Authors:
M. Dragicevic,
M. Friedl,
J. Hrubec,
H. Steininger,
A. Gädda,
J. Härkönen,
T. Lampén,
P. Luukka,
T. Peltola,
E. Tuominen,
E. Tuovinen,
A. Winkler,
P. Eerola,
T. Tuuva,
G. Baulieu,
G. Boudoul,
L. Caponetto,
C. Combaret,
D. Contardo,
T. Dupasquier,
G. Gallbit,
N. Lumb,
L. Mirabito,
S. Perries,
M. Vander Donckt
, et al. (462 additional authors not shown)
Abstract:
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator…
▽ More
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator thresholds. In this paper, comprehensive test beam studies are presented, which have been conducted to verify the design and to quantify the performance of the new detector assemblies in terms of tracking efficiency and spatial resolution. Under optimal conditions, the tracking efficiency is $99.95\pm0.05\,\%$, while the intrinsic spatial resolutions are $4.80\pm0.25\,μ\mathrm{m}$ and $7.99\pm0.21\,μ\mathrm{m}$ along the $100\,μ\mathrm{m}$ and $150\,μ\mathrm{m}$ pixel pitch, respectively. The findings are compared to a detailed Monte Carlo simulation of the pixel detector and good agreement is found.
△ Less
Submitted 1 June, 2017;
originally announced June 2017.
-
Interactions between two C60 molecules measured by scanning probe microscopies
Authors:
Nadine Hauptmann,
César González,
Fabian Mohn,
Leo Gross,
Gerhard Meyer,
Richard Berndt
Abstract:
C60-functionalized tips are used to probe C60 molecules on Cu(111) with scanning tunneling and atomic force microscopy. Distinct and complex intramolecular contrasts are found. Maximal attractive forces are observed when for both molecules a [6,6] bond faces a hexagon of the other molecule. Density functional theory calculations including parameterized van der Waals interactions corroborate the ob…
▽ More
C60-functionalized tips are used to probe C60 molecules on Cu(111) with scanning tunneling and atomic force microscopy. Distinct and complex intramolecular contrasts are found. Maximal attractive forces are observed when for both molecules a [6,6] bond faces a hexagon of the other molecule. Density functional theory calculations including parameterized van der Waals interactions corroborate the observations.
△ Less
Submitted 27 April, 2017;
originally announced April 2017.
-
Initial behavior of solutions to the Yang-Mills heat equation
Authors:
Nelia Charalambous,
Leonard Gross
Abstract:
We explore the small-time behavior of solutions to the Yang-Mills heat equation with rough initial data. We consider solutions $A(t)$ with initial value $A_0\in H_{1/2}(M)$, where $M$ is a bounded convex region in $\mathbb{R}^3$ or all of $\mathbb{R}^3$. The behavior, as $t\downarrow 0$, of the $L^p(M)$ norms of the time derivatives of $A(t)$ and its curvature $B(t)$ will be determined for $p=2$ a…
▽ More
We explore the small-time behavior of solutions to the Yang-Mills heat equation with rough initial data. We consider solutions $A(t)$ with initial value $A_0\in H_{1/2}(M)$, where $M$ is a bounded convex region in $\mathbb{R}^3$ or all of $\mathbb{R}^3$. The behavior, as $t\downarrow 0$, of the $L^p(M)$ norms of the time derivatives of $A(t)$ and its curvature $B(t)$ will be determined for $p=2$ and $6$, along with the $H_1(M)$ norm of these derivatives.
△ Less
Submitted 19 September, 2016;
originally announced September 2016.
-
The Yang-Mills heat equation with finite action
Authors:
Leonard Gross
Abstract:
The existence and uniqueness of solutions to the Yang-Mills heat equation is proven over three dimensional Euclidean space and over a bounded open convex set therein. The initial data is taken to lie in the Sobolev space of order one half, which is the critical Sobolev index for this equation over a three dimensional manifold. The existence is proven by solving first an augmented, strictly parabol…
▽ More
The existence and uniqueness of solutions to the Yang-Mills heat equation is proven over three dimensional Euclidean space and over a bounded open convex set therein. The initial data is taken to lie in the Sobolev space of order one half, which is the critical Sobolev index for this equation over a three dimensional manifold. The existence is proven by solving first an augmented, strictly parabolic equation and then gauge transforming the solution to a solution of the Yang-Mills heat equation itself. The gauge functions needed to carry out this procedure lie in the critical gauge group of Sobolev regularity three halves, which is a complete topological group in a natural metric but is not a Hilbert Lie group. The nature of this group must be understood in order to carry out the reconstruction procedure. Solutions to the Yang-Mills heat equation are shown to be strong solutions modulo these gauge functions. Energy inequalities and Neumann domination inequalities are used to establish needed initial behavior properties of solutions to the augmented equation.
△ Less
Submitted 29 September, 2017; v1 submitted 13 June, 2016;
originally announced June 2016.
-
The CLLC conjecture holds for cyclic outer permutations
Authors:
Jonathan L. Gross,
Toufik Mansour,
Thomas W. Tucker,
David G. L. Wang
Abstract:
Recently, Gross et al. posed the LLC conjecture for the locally log-concavity of the genus distribution of every graph, and provided an equivalent combinatorial version, the CLLC conjecture, on the log-concavity of the generating function counting cycles of some permutation compositions. In this paper, we confirm the CLLC conjecture for cyclic permutations, with the aid of Hultman numbers and by a…
▽ More
Recently, Gross et al. posed the LLC conjecture for the locally log-concavity of the genus distribution of every graph, and provided an equivalent combinatorial version, the CLLC conjecture, on the log-concavity of the generating function counting cycles of some permutation compositions. In this paper, we confirm the CLLC conjecture for cyclic permutations, with the aid of Hultman numbers and by applying the Hermite--Biehler theorem on the generating function of Stirling numbers of the first kind. This leads to a further conjecture that every local genus polynomial is real-rooted.
△ Less
Submitted 10 November, 2015;
originally announced November 2015.
-
Strong hypercontractivity and logarithmic Sobolev inequalities on stratified complex Lie groups
Authors:
Nathaniel Eldredge,
Leonard Gross,
Laurent Saloff-Coste
Abstract:
We show that for a hypoelliptic Dirichlet form operator A on a stratified complex Lie group, if the logarithmic Sobolev inequality holds, then a holomorphic projection of A is strongly hypercontractive in the sense of Janson. This extends previous results of Gross to a setting in which the operator A is not holomorphic.
We show that for a hypoelliptic Dirichlet form operator A on a stratified complex Lie group, if the logarithmic Sobolev inequality holds, then a holomorphic projection of A is strongly hypercontractive in the sense of Janson. This extends previous results of Gross to a setting in which the operator A is not holomorphic.
△ Less
Submitted 12 September, 2017; v1 submitted 17 October, 2015;
originally announced October 2015.
-
Trap** in irradiated p-on-n silicon sensors at fluences anticipated at the HL-LHC outer tracker
Authors:
W. Adam,
T. Bergauer,
M. Dragicevic,
M. Friedl,
R. Fruehwirth,
M. Hoch,
J. Hrubec,
M. Krammer,
W. Treberspurg,
W. Waltenberger,
S. Alderweireldt,
W. Beaumont,
X. Janssen,
S. Luyckx,
P. Van Mechelen,
N. Van Remortel,
A. Van Spilbeeck,
P. Barria,
C. Caillol,
B. Clerbaux,
G. De Lentdecker,
D. Dobur,
L. Favart,
A. Grebenyuk,
Th. Lenzi
, et al. (663 additional authors not shown)
Abstract:
The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determi…
▽ More
The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determine the charge collection efficiencies separately for electrons and holes drifting through the sensor. The effective trap** rates are extracted by comparing the results to simulation. The electric field is simulated using Synopsys device simulation assuming two effective defects. The generation and drift of charge carriers are simulated in an independent simulation based on PixelAV. The effective trap** rates are determined from the measured charge collection efficiencies and the simulated and measured time-resolved current pulses are compared. The effective trap** rates determined for both electrons and holes are about 50% smaller than those obtained using standard extrapolations of studies at low fluences and suggests an improved tracker performance over initial expectations.
△ Less
Submitted 7 May, 2015;
originally announced May 2015.
-
Effect of electron-phonon interaction on the formation of one-dimensional electronic states in coupled Cl vacancies
Authors:
Bruno Schuler,
Mats Persson,
Sami Paavilainen,
Niko Pavliček,
Leo Gross,
Gerhard Meyer,
Jascha Repp
Abstract:
The formation of extended electron states in one-dimensional nanostructures is of key importance for the function of molecular electronics devices. Here we study the effects of strong electron-phonon interaction on the formation of extended electronic states in intentionally created Cl vacancy pairs and chains in a NaCl bilayer on Cu(111). The interaction between the vacancies was tailored by fabr…
▽ More
The formation of extended electron states in one-dimensional nanostructures is of key importance for the function of molecular electronics devices. Here we study the effects of strong electron-phonon interaction on the formation of extended electronic states in intentionally created Cl vacancy pairs and chains in a NaCl bilayer on Cu(111). The interaction between the vacancies was tailored by fabricating vacancy pairs and chains of different orientation and separation with atomic precision using vertical manipulation. Small separation of divacancies led to the formation of symmetric and antisymmetric vacancy states and localized interface-states. By scanning tunneling spectroscopy (STS) we measured their energy splitting and broadening as a function of the inter-vacancy separation. Unexpectedly, the energy splitting between the vacancy states is enlarged by level repulsion resulting from phonon dressing of the electronic states, as evidenced by theory. Already for a few coupled vacancies we observe an emerging band structure of the defect band.
△ Less
Submitted 23 March, 2015; v1 submitted 20 March, 2015;
originally announced March 2015.
-
Root geometry of polynomial sequences II: Type (1,0)
Authors:
J. L. Gross,
T. Mansour,
T. W. Tucker,
D. G. L. Wang
Abstract:
We consider the sequence of polynomials $W_n(x)$ defined by the recursion $W_n(x)=(ax+b)W_{n-1}(x)+dW_{n-2}(x)$, with initial values $W_0(x)=1$ and $W_1(x)=t(x-r)$, where $a,b,d,t,r$ are real numbers, $a,t>0$, and $d<0$. We show that every polynomial $W_n(x)$ is distinct-real-rooted, and that the roots of the polynomial $W_n(x)$ interlace the roots of the polynomial $W_{n-1}(x)$. We find that, as…
▽ More
We consider the sequence of polynomials $W_n(x)$ defined by the recursion $W_n(x)=(ax+b)W_{n-1}(x)+dW_{n-2}(x)$, with initial values $W_0(x)=1$ and $W_1(x)=t(x-r)$, where $a,b,d,t,r$ are real numbers, $a,t>0$, and $d<0$. We show that every polynomial $W_n(x)$ is distinct-real-rooted, and that the roots of the polynomial $W_n(x)$ interlace the roots of the polynomial $W_{n-1}(x)$. We find that, as $n\to\infty$, the sequence of smallest roots of the polynomials $W_n(x)$ converges decreasingly to a real number, and that the sequence of largest roots converges increasingly to a real number. Moreover, by using the Dirichlet approximation theorem, we prove that there is a number to which, for every positive integer $i\ge2$, the sequence of $i$th smallest roots of the polynomials $W_n(x)$ converges. Similarly, there is a number to which, for every positive integer $i\ge2$, the sequence of $i$th largest roots of the polynomials $W_n(x)$ converges. It turns out that these two convergence points are independent of the numbers $t$ and $r$, as well as $i$. We derive explicit expressions for these four limit points, and we determine completely when some of these limit points coincide.
△ Less
Submitted 9 March, 2015;
originally announced March 2015.
-
Root geometry of polynomial sequences I: Type $(0,1)$
Authors:
J. L. Gross,
T. Mansour,
T. W. Tucker,
D. G. L. Wang
Abstract:
This paper is concerned with the distribution in the complex plane of the roots of a polynomial sequence $\{W_n(x)\}_{n\ge0}$ given by a recursion $W_n(x)=aW_{n-1}(x)+(bx+c)W_{n-2}(x)$, with $W_0(x)=1$ and $W_1(x)=t(x-r)$, where $a>0$, $b>0$, and $c,t,r\in\mathbb{R}$. Our results include proof of the distinct-real-rootedness of every such polynomial $W_n(x)$, derivation of the best bound for the z…
▽ More
This paper is concerned with the distribution in the complex plane of the roots of a polynomial sequence $\{W_n(x)\}_{n\ge0}$ given by a recursion $W_n(x)=aW_{n-1}(x)+(bx+c)W_{n-2}(x)$, with $W_0(x)=1$ and $W_1(x)=t(x-r)$, where $a>0$, $b>0$, and $c,t,r\in\mathbb{R}$. Our results include proof of the distinct-real-rootedness of every such polynomial $W_n(x)$, derivation of the best bound for the zero-set $\{x\mid W_n(x)=0\ \text{for some $n\ge1$}\}$, and determination of three precise limit points of this zero-set. Also, we give several applications from combinatorics and topological graph theory.
△ Less
Submitted 24 January, 2015;
originally announced January 2015.
-
Log-concavity of the genus polynomials of Ringel ladders
Authors:
J. L. Gross,
T. Mansour,
T. W. Tucker,
D. G. L. Wang
Abstract:
A Ringel ladder can be formed by a self-bar-amalgamation operation on a symmetric ladder, that is, by joining the root vertices on its end-rungs. The present authors have previously derived criteria under which linear chains of copies of one or more graphs have log-concave genus polynomials. Herein we establish Ringel ladders as the first significant non-linear infinite family of graphs known to h…
▽ More
A Ringel ladder can be formed by a self-bar-amalgamation operation on a symmetric ladder, that is, by joining the root vertices on its end-rungs. The present authors have previously derived criteria under which linear chains of copies of one or more graphs have log-concave genus polynomials. Herein we establish Ringel ladders as the first significant non-linear infinite family of graphs known to have log-concave genus polynomials. We construct an algebraic representation of self-bar-amalgamation as a matrix operation, to be applied to a vector representation of the partitioned genus distribution of a symmetric ladder. Analysis of the resulting genus polynomial involves the use of Chebyshev polynomials. This paper continues our quest to affirm the quarter-century-old conjecture that all graphs have log-concave genus polynomials.
△ Less
Submitted 24 January, 2015;
originally announced January 2015.
-
Iterated claws have real-rooted genus polynomials
Authors:
J. L. Gross,
T. Mansour,
T. W. Tucker,
D. G. L. Wang
Abstract:
We prove that the genus polynomials of the graphs called iterated claws are real-rooted. This continues our work directed toward the 25-year-old conjecture that the genus distribution of every graph is log-concave. We have previously established log-concavity for sequences of graphs constructed by iterative vertex-amalgamation or iterative edge-amalgamation of graphs that satisfy a commonly observ…
▽ More
We prove that the genus polynomials of the graphs called iterated claws are real-rooted. This continues our work directed toward the 25-year-old conjecture that the genus distribution of every graph is log-concave. We have previously established log-concavity for sequences of graphs constructed by iterative vertex-amalgamation or iterative edge-amalgamation of graphs that satisfy a commonly observable condition on their partitioned genus distributions, even though it had been proved previously that iterative amalgamation does not always preserve real-rootedness of the genus polynomial of the iterated graph. In this paper, the iterated topological operations are adding a claw and adding a 3-cycle, rather than vertex- or edge-amalgamation. Our analysis here illustrates some advantages of employing a matrix representation of the transposition of a set of productions.
△ Less
Submitted 24 January, 2015;
originally announced January 2015.
-
Investigating Atomic Contrast in Atomic Force Microscopy and Kelvin Probe Force Microscopy on Ionic Systems using Functionalized Tips
Authors:
Leo Gross,
Bruno Schuler,
Fabian Mohn,
Nikolaj Moll,
Niko Pavliček,
Wolfram Steurer,
Ivan Scivetti,
Konstantinos Kotsis,
Mats Persson,
Gerhard Meyer
Abstract:
Noncontact atomic force microscopy (NC-AFM) and Kelvin probe force microscopy (KPFM) have become important tools for nanotechnology; however, their contrast mechanisms on the atomic scale are not entirely understood. Here we used chlorine vacancies in NaCl bilayers on Cu(111) as a model system to investigate atomic contrast as a function of applied voltage, tip height, and tip functionalization. W…
▽ More
Noncontact atomic force microscopy (NC-AFM) and Kelvin probe force microscopy (KPFM) have become important tools for nanotechnology; however, their contrast mechanisms on the atomic scale are not entirely understood. Here we used chlorine vacancies in NaCl bilayers on Cu(111) as a model system to investigate atomic contrast as a function of applied voltage, tip height, and tip functionalization. We demonstrate that the AFM contrast on the atomic scale decisively depends on both the tip termination and the sample voltage. On the contrary, the local contact potential difference (LCPD) acquired with KPFM showed the same qualitative contrast for all tip terminations investigated, which resembled the contrast of the electric field of the sample. We find that the AFM contrast stems mainly from electrostatic interactions but its tip dependence cannot be explained by the tip dipole alone. With the aid of a simple electrostatic model and by density functional theory we investigate the underlying contrast mechanisms.
△ Less
Submitted 29 August, 2014;
originally announced August 2014.
-
Genus Distributions of cubic series-parallel graphs
Authors:
Jonathan L. Gross,
Michal Kotrbčík,
Timothy Sun
Abstract:
We derive a quadratic-time algorithm for the genus distribution of any 3-regular, biconnected series-parallel graph, which we extend to any biconnected series-parallel graph of maximum degree at most 3. Since the biconnected components of every graph of treewidth 2 are series-parallel graphs, this yields, by use of bar-amalgamation, a quadratic-time algorithm for every graph of treewidth at most 2…
▽ More
We derive a quadratic-time algorithm for the genus distribution of any 3-regular, biconnected series-parallel graph, which we extend to any biconnected series-parallel graph of maximum degree at most 3. Since the biconnected components of every graph of treewidth 2 are series-parallel graphs, this yields, by use of bar-amalgamation, a quadratic-time algorithm for every graph of treewidth at most 2 and maximum degree at most 3.
△ Less
Submitted 30 July, 2014;
originally announced July 2014.
-
Log-Concavity of Combinations of Sequences and Applications to Genus Distributions
Authors:
Jonathan L. Gross,
Toufik Mansour,
Thomas W. Tucker,
David G. L. Wang
Abstract:
We formulate conditions on a set of log-concave sequences, under which any linear combination of those sequences is log-concave, and further, of conditions under which linear combinations of log-concave sequences that have been transformed by convolution are log-concave. These conditions involve relations on sequences called \textit{synchronicity} and \textit{ratio-dominance}, and a characterizati…
▽ More
We formulate conditions on a set of log-concave sequences, under which any linear combination of those sequences is log-concave, and further, of conditions under which linear combinations of log-concave sequences that have been transformed by convolution are log-concave. These conditions involve relations on sequences called \textit{synchronicity} and \textit{ratio-dominance}, and a characterization of some bivariate sequences as \textit{lexicographic}. We are motivated by the 25-year old conjecture that the genus distribution of every graph is log-concave. Although calculating genus distributions is NP-hard, they have been calculated explicitly for many graphs of tractable size, and the three conditions have been observed to occur in the \textit{partitioned genus distributions} of all such graphs. They are used here to prove the log-concavity of the genus distributions of graphs constructed by iterative amalgamation of double-rooted graph fragments whose genus distributions adhere to these conditions, even though it is known that the genus polynomials of some such graphs have imaginary roots. A blend of topological and combinatorial arguments demonstrates that log-concavity is preserved through the iterations.
△ Less
Submitted 23 July, 2014;
originally announced July 2014.
-
Neumann domination for the Yang-Mills heat equation
Authors:
Nelia Charalambous,
Leonard Gross
Abstract:
Long time existence and uniqueness of solutions to the Yang-Mills heat equation have been proven over a compact 3-manifold with boundary for initial data of finite energy. In the present paper we improve on previous estimates by using a Neumann domination technique that allows us to get much better pointwise bounds on the magnetic field. As in the earlier work, we focus on Dirichlet, Neumann and M…
▽ More
Long time existence and uniqueness of solutions to the Yang-Mills heat equation have been proven over a compact 3-manifold with boundary for initial data of finite energy. In the present paper we improve on previous estimates by using a Neumann domination technique that allows us to get much better pointwise bounds on the magnetic field. As in the earlier work, we focus on Dirichlet, Neumann and Marini boundary conditions. In addition, we show that the Wilson Loop functions, gauge invariantly regularized, converge as the parabolic time goes to infinity.
△ Less
Submitted 30 May, 2014; v1 submitted 26 May, 2014;
originally announced May 2014.
-
Force and Conductance during contact formation to a C60 molecule
Authors:
Nadine Hauptmann,
Fabian Mohn,
Leo Gross,
Gerhard Meyer,
Thomas Frederiksen,
Richard Berndt
Abstract:
Force and conductance were simultaneously measured during the formation of Cu-C60 and C60-C60 contacts using a combined cryogenic scanning tunneling and atomic force microscope. The contact geometry was controlled with submolecular resolution. The maximal attractive forces measured for the two types of junctions were found to differ significantly. We show that the previously reported values of the…
▽ More
Force and conductance were simultaneously measured during the formation of Cu-C60 and C60-C60 contacts using a combined cryogenic scanning tunneling and atomic force microscope. The contact geometry was controlled with submolecular resolution. The maximal attractive forces measured for the two types of junctions were found to differ significantly. We show that the previously reported values of the contact conductance correspond to the junction being under maximal tensile stress.
△ Less
Submitted 14 August, 2012;
originally announced August 2012.
-
Discovery of Gallium, Germanium, Lutetium, and Hafnium Isotopes
Authors:
J. L. Gross,
M. Thoennessen
Abstract:
Currently, twenty-eight gallium, thirty-one germanium, thirty-five lutetium, and thirty-six hafnium isotopes have been observed and the discovery of these isotopes is discussed here. For each isotope a brief synopsis of the first refereed publication, including the production and identification method, is presented.
Currently, twenty-eight gallium, thirty-one germanium, thirty-five lutetium, and thirty-six hafnium isotopes have been observed and the discovery of these isotopes is discussed here. For each isotope a brief synopsis of the first refereed publication, including the production and identification method, is presented.
△ Less
Submitted 28 September, 2011;
originally announced September 2011.
-
Discovery of Zinc, Selenium, Bromine, and Neodymium Isotopes
Authors:
J. L. Gross,
J. Claes,
J. Kathawa,
M. Thoennessen
Abstract:
Currently, thirty-two zinc, thirty-two selenium, twenty-nine bromine and thirty-one neodymium isotopes have been observed and the discovery of these isotopes is discussed here. For each isotope a brief synopsis of the first refereed publication, including the production and identification method, is presented.
Currently, thirty-two zinc, thirty-two selenium, twenty-nine bromine and thirty-one neodymium isotopes have been observed and the discovery of these isotopes is discussed here. For each isotope a brief synopsis of the first refereed publication, including the production and identification method, is presented.
△ Less
Submitted 9 December, 2010;
originally announced December 2010.
-
Discovery of Calcium, Indium, Tin, and Platinum Isotopes
Authors:
S. Amos,
J. L. Gross,
M. Thoennessen
Abstract:
Currently, twenty-four calcium, thirty-eight indium, thirty-eight tin and thirty-nine platinum isotopes have been observed and the discovery of these isotopes is discussed here. For each isotope a brief synopsis of the first refereed publication, including the production and identification method, is presented.
Currently, twenty-four calcium, thirty-eight indium, thirty-eight tin and thirty-nine platinum isotopes have been observed and the discovery of these isotopes is discussed here. For each isotope a brief synopsis of the first refereed publication, including the production and identification method, is presented.
△ Less
Submitted 8 September, 2010; v1 submitted 21 June, 2010;
originally announced June 2010.
-
Discovery of the Calcium Isotopes
Authors:
J. L. Gross,
M. Thoennessen
Abstract:
Twenty four calcium isotopes have so far been observed; the discovery of these isotopes is discussed. For each isotope a brief summary of the first refereed publication, including the production and identification method, is presented.
Twenty four calcium isotopes have so far been observed; the discovery of these isotopes is discussed. For each isotope a brief summary of the first refereed publication, including the production and identification method, is presented.
△ Less
Submitted 8 September, 2010; v1 submitted 27 April, 2010;
originally announced April 2010.
-
The Yang-Mills heat semigroup on three-manifolds with boundary
Authors:
Nelia Charalambous,
Leonard Gross
Abstract:
Long time existence and uniqueness of solutions to the Yang-Mills heat equation is proven over a compact 3-manifold with smooth boundary. The initial data is taken to be a Lie algebra valued connection form in the Sobolev space $H_1$. Three kinds of boundary conditions are explored, Dirichlet type, Neumann type and Marini boundary conditions. The last is a nonlinear boundary condition, specified b…
▽ More
Long time existence and uniqueness of solutions to the Yang-Mills heat equation is proven over a compact 3-manifold with smooth boundary. The initial data is taken to be a Lie algebra valued connection form in the Sobolev space $H_1$. Three kinds of boundary conditions are explored, Dirichlet type, Neumann type and Marini boundary conditions. The last is a nonlinear boundary condition, specified by setting the normal component of the curvature to zero on the boundary. The Yang-Mills heat equation is a weakly parabolic non-linear equation. We use a technique of Donaldson and Sadun to convert it to a parabolic equation and then gauge transform the solution of the parabolic equation back to a solution of the original equation. Apriori estimates are developed by first establishing a gauge invariant version of the Gaffney-Friedrichs inequality. A gauge invariant regularization procedure for solutions is also established.
Uniqueness holds upon imposition of boundary conditions on only two of the three components of the connection form because of weak parabolicity. This work is motivated by possible applications to quantum field theory.
△ Less
Submitted 9 April, 2010;
originally announced April 2010.
-
Temperature dependence of the nonlocal voltage in an Fe/GaAs electrical spin injection device
Authors:
G. Salis,
A. Fuhrer,
R. R. Schlittler,
L. Gross,
S. F. Alvarado
Abstract:
The nonlocal spin resistance is measured as a function of temperature in a Fe/GaAs spin-injection device. For nonannealed samples that show minority-spin injection, the spin resistance is observed up to room temperature and decays exponentially with temperature at a rate of 0.018\,K$^{-1}$. Post-growth annealing at 440\,K increases the spin signal at low temperatures, but the decay rate also incre…
▽ More
The nonlocal spin resistance is measured as a function of temperature in a Fe/GaAs spin-injection device. For nonannealed samples that show minority-spin injection, the spin resistance is observed up to room temperature and decays exponentially with temperature at a rate of 0.018\,K$^{-1}$. Post-growth annealing at 440\,K increases the spin signal at low temperatures, but the decay rate also increases to 0.030\,K$^{-1}$. From measurements of the diffusion constant and the spin lifetime in the GaAs channel, we conclude that sample annealing modifies the temperature dependence of the spin transfer efficiency at injection and detection contacts. Surprisingly, the spin transfer efficiency increases in samples that exhibit minority-spin injection.
△ Less
Submitted 7 April, 2010;
originally announced April 2010.
-
Front-End electronics configuration system for CMS
Authors:
P. Gras,
F. Drouhin,
W. Funk,
L. Gross,
D. Vintache
Abstract:
The four LHC experiments at CERN have decided to use a commercial SCADA (Supervisory Control And Data Acquisition) product for the supervision of their DCS (Detector Control System). The selected SCADA, which is therefore used for the CMS DCS, is PVSS II from the company ETM. This SCADA has its own database, which is suitable for storing conventional controls data such as voltages, temperatures…
▽ More
The four LHC experiments at CERN have decided to use a commercial SCADA (Supervisory Control And Data Acquisition) product for the supervision of their DCS (Detector Control System). The selected SCADA, which is therefore used for the CMS DCS, is PVSS II from the company ETM. This SCADA has its own database, which is suitable for storing conventional controls data such as voltages, temperatures and pressures. In addition, calibration data and FE (Front-End) electronics configuration need to be stored. The amount of these data is too large to be stored in the SCADA database [1]. Therefore an external database will be used for managing such data. However, this database should be completely integrated into the SCADA framework, it should be accessible from the SCADA and the SCADA features, e.g. alarming, logging should be benefited from. For prototy**, Oracle 8i was selected as the external database manager. The development of the control system for calibration constants and FE electronics configuration has been done in close collaboration with the CMS tracker group and JCOP (Joint COntrols Project)(1).
(1)The four LHC experiments and the CERN IT/CO group has merged their efforts to build the experiments controls systems and set up the JCOP at the end of December, 1997 for this purpose.
△ Less
Submitted 17 December, 2001;
originally announced December 2001.