-
Gyrokinetic Simulations Compared with Magnetic Fluctuations Diagnosed with a Faraday-Effect Radial Interferometer-Polarimeter in the DIII-D pedestal
Authors:
M. T. Curie,
D. R. Hatch,
M. Halfmoon,
J. Chen,
D. L. Brower,
E. Hassan,
M. Kotschenreuther,
S. M. Mahajan,
R. J. Groebner
Abstract:
Experimental data on electromagnetic fluctuations in DIII-D, made available by the Faraday-effect Radial Interferometer-Polarimeter (RIP) diagnostic, is examined in comparison with detailed gyrokinetic simulations using Gyrokinetic Electromagnetic Numerical Experiment (GENE). The diagnostic has the unique capability of making internal measurements of fluctuating magnetic fields…
▽ More
Experimental data on electromagnetic fluctuations in DIII-D, made available by the Faraday-effect Radial Interferometer-Polarimeter (RIP) diagnostic, is examined in comparison with detailed gyrokinetic simulations using Gyrokinetic Electromagnetic Numerical Experiment (GENE). The diagnostic has the unique capability of making internal measurements of fluctuating magnetic fields $\frac{\int n_e δB_r dR}{\int n_e dR}$. Local linear simulations identify microtearing modes (MTMs) over a substantial range of toroidal mode numbers (peaking at $n=15$) with frequencies in good agreement with the experimental data. Local nonlinear simulations reinforce this result by producing a magnetic frequency spectrum in good agreement with that diagnosed by RIP. Simulated heat fluxes are in the range of experimental expectations. However, magnetic fluctuation amplitudes are substantially lower than the experimental expectations. Possible sources of this discrepancy are discussed, notably the fact that the diagnostics are localized at the mid-plane -- the poloidal location where the simulations predict the fluctuation amplitudes to be smallest. Despite some discrepancies, several connections between simulations and experiments, combined with general criteria discriminating between potential pedestal instabilities, strongly point to MTMs as the source of the observed magnetic fluctuations.
△ Less
Submitted 4 October, 2022; v1 submitted 29 August, 2022;
originally announced August 2022.
-
MHD modeling of a DIII-D low-torque QH-mode discharge and comparison to observations
Authors:
J. R. King,
S. E. Kruger,
K. H. Burrell,
X. Chen,
A. M. Garofalo,
R. J. Groebner,
K. E. J. Olofsson,
A. Y. Pankin,
P. B. Snyder
Abstract:
Extended-MHD modeling of DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] quiescent H-mode (QH-mode) discharges with nonlinear NIMROD [C. R. Sovinec et al., J. Comput. Phys. 195, 355 (2004)] simulations saturates into a turbulent state but does not saturate when the steady-state flow inferred from measurements is not included. This is consistent with the experimental observations of the q…
▽ More
Extended-MHD modeling of DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] quiescent H-mode (QH-mode) discharges with nonlinear NIMROD [C. R. Sovinec et al., J. Comput. Phys. 195, 355 (2004)] simulations saturates into a turbulent state but does not saturate when the steady-state flow inferred from measurements is not included. This is consistent with the experimental observations of the quiescent regime on DIII-D. The simulation with flow develops into a saturated turbulent state where the n=1 and 2 toroidal modes become dominant through an inverse cascade. Each mode in the range of n=1-5 is dominant at a different time. Consistent with experimental observations during QH-mode, the simulated state leads to large particle transport relative to the thermal transport. Analysis shows that the amplitude and phase of the density and temperature perturbations differ resulting in greater fluctuation-induced convective particle transport relative to the convective thermal transport. Comparison to magnetic-coil measurements shows that rotation frequencies differ between the simulation and experiment, which indicates that more sophisticated extended-MHD two-fluid modeling is required.
△ Less
Submitted 7 March, 2017;
originally announced March 2017.
-
Effect of Scrape-Off-Layer Current on Reconstructed Tokamak Equilibrium
Authors:
J. R. King,
S. E. Kruger,
R. J. Groebner,
J. D. Hanson,
J. D. Hebert,
E. D. Held,
J. R. Jepson
Abstract:
Methods are described that extend fields from reconstructed equilibria to include scrape-off-layer current through extrapolated parametrized and experimental fits. The extrapolation includes both the effects of the toroidal-field and pressure gradients which produce scrape-off-layer current after recomputation of the Grad-Shafranov solution. To quantify the degree that inclusion of scrape-off-laye…
▽ More
Methods are described that extend fields from reconstructed equilibria to include scrape-off-layer current through extrapolated parametrized and experimental fits. The extrapolation includes both the effects of the toroidal-field and pressure gradients which produce scrape-off-layer current after recomputation of the Grad-Shafranov solution. To quantify the degree that inclusion of scrape-off-layer current modifies the equilibrium, the $χ$-squared goodness-of-fit parameter is calculated for cases with and without scrape-off-layer current. The change in $χ$-squared is found to be minor when scrape-off-layer current is included however flux surfaces are shifted by up to 3 cm. The impact on edge modes of these scrape-off-layer modifications is also found to be small and the importance of these methods to nonlinear computation is discussed.
△ Less
Submitted 31 January, 2017;
originally announced February 2017.
-
NIMROD Modeling of Quiescent H-mode: Reconstruction Considerations and Saturation Mechanism
Authors:
J. R. King,
K. H. Burrell,
A. M. Garofalo,
R. J. Groebner,
S. E. Kruger,
A. Y. Pankin,
P. B. Snyder
Abstract:
The extended-MHD NIMROD code [C.R. Sovinec and J.R. King, J. Comput. Phys. 229, 5803 (2010)] models broadband-MHD activity from a reconstruction of a quiescent H-mode shot on the DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)]. Computations with the reconstructed toroidal and poloidal ion flows exhibit low-n perturbations (n=1-5) that grow and saturate into a turbulent-like MHD state. Th…
▽ More
The extended-MHD NIMROD code [C.R. Sovinec and J.R. King, J. Comput. Phys. 229, 5803 (2010)] models broadband-MHD activity from a reconstruction of a quiescent H-mode shot on the DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)]. Computations with the reconstructed toroidal and poloidal ion flows exhibit low-n perturbations (n=1-5) that grow and saturate into a turbulent-like MHD state. The workflow used to project the reconstructed state onto the NIMROD basis functions re-solves the Grad-Shafranov equation and extrapolates profiles to include scrape-off-layer currents. Evaluation of the transport from the turbulent-like MHD state leads to a relaxation of the density and temperature profiles.
△ Less
Submitted 31 January, 2017;
originally announced February 2017.
-
Kinetic modeling of divertor heat load fluxes in the Alcator C-Mod and DIII-D tokamaks
Authors:
A. Y. Pankin,
T. Rafiq,
A. H. Kritz,
G. Y. Park,
C. S. Chang,
D. Brunner,
R. J. Groebner,
J. W. Hughes,
B. LaBombard,
J. L. Terry,
S. Ku
Abstract:
The guiding-center kinetic neoclassical transport code, XGC0, [C.S. Chang et. al, Phys. Plasmas 11, 2649 (2004)] is used to compute the heat fluxes and the heat-load width in the outer divertor plates of Alcator C-Mod and DIII-D tokamaks. The dependence of the width of heat-load fluxes on neoclassical effects, neutral collisions and anomalous transport is investigated using the XGC0 code. The XGC0…
▽ More
The guiding-center kinetic neoclassical transport code, XGC0, [C.S. Chang et. al, Phys. Plasmas 11, 2649 (2004)] is used to compute the heat fluxes and the heat-load width in the outer divertor plates of Alcator C-Mod and DIII-D tokamaks. The dependence of the width of heat-load fluxes on neoclassical effects, neutral collisions and anomalous transport is investigated using the XGC0 code. The XGC0 code includes realistic X-point geometry, a neutral source model, the effects of collisions, and a diffusion model for anomalous transport. It is observed that width of the XGC0 neoclassical heat-load is approximately inversely proportional to the total plasma current $I_{\rm p}$. The scaling of the width of the divertor heat-load with plasma current is examined for an Alcator C-Mod discharge and four DIII-D discharges. The scaling of the divertor heat-load width with plasma current is found to be weaker in the Alcator C-Mod discharge compared to scaling found in the DIII-D discharges. The effect of neutral collisions on the $1/I_{\rm p}$ scaling of heat-load width is shown not to be significant. Although inclusion of poloidally uniform anomalous transport results in a deviation from the $1/I_{\rm p}$ scaling, the inclusion of the anomalous transport that is driven by ballooning-type instabilities results in recovering the neoclassical $1/I_{\rm p}$ scaling. The Bohm or Gyro-Bohm scalings of anomalous transport does not strongly affect the dependence of the heat-load width on plasma current. The inclusion of anomalous transport, in general, results in widening the width of neoclassical divertor heat-load and enhances the neoclassical heat-load fluxes on the divertor plates. Understanding heat transport in the tokamak scrape-off layer plasmas is important for strengthening the basis for predicting divertor conditions in ITER.
△ Less
Submitted 25 June, 2015;
originally announced June 2015.
-
Global Gyrokinetic Simulation of Tokamak Edge Pedestal Instabilities
Authors:
Weigang Wan,
Scott E. Parker,
Yang Chen,
Zheng Yan,
Richard J. Groebner,
Philip B. Snyder
Abstract:
Global electromagnetic gyrokinetic simulations show the existence of near threshold conditions for both a high-$n$ kinetic ballooning mode (KBM) and an intermediate-$n$ kinetic version of peeling-ballooning mode (KPBM) in the edge pedestal of two DIII-D H-mode discharges. When the magnetic shear is reduced in a narrow region of steep pressure gradient, the KPBM is significantly stabilized, while t…
▽ More
Global electromagnetic gyrokinetic simulations show the existence of near threshold conditions for both a high-$n$ kinetic ballooning mode (KBM) and an intermediate-$n$ kinetic version of peeling-ballooning mode (KPBM) in the edge pedestal of two DIII-D H-mode discharges. When the magnetic shear is reduced in a narrow region of steep pressure gradient, the KPBM is significantly stabilized, while the KBM is weakly destabilized and hence becomes the most-unstable mode. Collisions decrease the KBM's critical $β$ and increase the growth rate.
△ Less
Submitted 26 September, 2012; v1 submitted 7 March, 2012;
originally announced March 2012.
