-
Quasiparticles with fractional charges in fractionally filled systems
Authors:
A. N. Grigorenko
Abstract:
We study systems that approach a state possessing discrete symmetry due to different degenerate realizations for the system. For concreteness, we consider fractionally filled systems where degeneracy comes from the presence of identical sub-lattices. We show that such systems possess a new type of quasiparticles with fractional charges, which we refer to as fractyons. We discuss static and dynamic…
▽ More
We study systems that approach a state possessing discrete symmetry due to different degenerate realizations for the system. For concreteness, we consider fractionally filled systems where degeneracy comes from the presence of identical sub-lattices. We show that such systems possess a new type of quasiparticles with fractional charges, which we refer to as fractyons. We discuss static and dynamic properties of these quasiparticles.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
Topological photonics with scattering media
Authors:
E. Cusworth,
V. G. Kravets,
F. Fraggelakis,
P. Lingos,
E. Stratakis,
A. V. Kabashin,
A. N. Grigorenko
Abstract:
Scattering media, being ubiquitous in nature and critically important for assessments (e.g., biological tissues), are often considered as nuisance in optics. Here we show that it is not always the case and scattering media could be essential in providing elements of topological photonics. We demonstrate that topological darkness can be realised in the presence of scattering media due to the transv…
▽ More
Scattering media, being ubiquitous in nature and critically important for assessments (e.g., biological tissues), are often considered as nuisance in optics. Here we show that it is not always the case and scattering media could be essential in providing elements of topological photonics. We demonstrate that topological darkness can be realised in the presence of scattering media due to the transverse nature of electromagnetic waves and the hairy ball theorem. We describe realizations of topological darkness in a scattering medium comprising composite gold nanostructures produced by a low-cost technique of laser structuring of thin metal films. Our results can be useful for a variety of tasks, including topological nanophotonics, optical label-free biosensing, and biomedical photonics.
△ Less
Submitted 17 January, 2024; v1 submitted 16 January, 2024;
originally announced January 2024.
-
Non-polaritonic effects in cavity-modified photochemistry
Authors:
Philip A. Thomas,
Wai Jue Tan,
Vasyl G. Kravets,
Alexander N. Grigorenko,
William L. Barnes
Abstract:
Strong coupling of molecules to vacuum fields has been widely reported to lead to modified chemical properties such as reaction rates. However, some recent attempts to reproduce infrared strong coupling results have not been successful, suggesting that factors other than strong coupling may sometimes be involved. Here we re-examine the first of these vacuum-modified chemistry experiments in which…
▽ More
Strong coupling of molecules to vacuum fields has been widely reported to lead to modified chemical properties such as reaction rates. However, some recent attempts to reproduce infrared strong coupling results have not been successful, suggesting that factors other than strong coupling may sometimes be involved. Here we re-examine the first of these vacuum-modified chemistry experiments in which changes to a molecular photoisomerisation process in the UV-vis spectral range were attributed to strong coupling of the molecules to visible light. We observed significant variations in photoisomerisation rates consistent with the original work; however, we found no evidence that these changes need to be attributed to strong coupling. Instead, we suggest that the photoisomerisation rates involved are most strongly influenced by the absorption of ultraviolet radiation in the cavity. Our results indicate that care must be taken to rule out non-polaritonic effects before invoking strong coupling to explain any changes of chemical properties arising in cavity-based experiments.
△ Less
Submitted 14 July, 2023; v1 submitted 8 June, 2023;
originally announced June 2023.
-
Highly ordered LIPSS on Au thin film for plasmonic sensing fabricated by double femtosecond pulses
Authors:
Fotis Fraggelakis,
Panagiotis Lingos,
Emma Cusworth,
Vasyl G. Kravets,
Alexander N. Grigorenko,
Andrei V. Kabashin,
Emmanuel Stratakis
Abstract:
We report on the single-step fabrication of homogeneous and highly ordered Laser Induced Periodic Surface Structures (LIPSS) over large areas on Au nanolayers, that can be used for plasmonic sensing. A comprehensive study on LIPSS formation on 32 nm Au film upon double, 170 fs pulse irradiation, unveiled the key importance of interpulse delay as the determining factor behind the homogeneity of las…
▽ More
We report on the single-step fabrication of homogeneous and highly ordered Laser Induced Periodic Surface Structures (LIPSS) over large areas on Au nanolayers, that can be used for plasmonic sensing. A comprehensive study on LIPSS formation on 32 nm Au film upon double, 170 fs pulse irradiation, unveiled the key importance of interpulse delay as the determining factor behind the homogeneity of laser induced structures and confirmed that highly ordered, functional LIPSS occur solely upon double pulse irradiation. In particular, the impact of pulse overlap, fluence and interpulse delay reveals that homogeneous LIPSS formation is optimized within a specific interpulse delay range. At the same time, examination of nanoscale features of the structures points out a significant differentiation of the LIPSS formation characteristics between single and double pulse irradiation. Theoretical investigation complements experimental results providing insights on the structure formation mechanism. Ellipsometric measurements validate that such structures exhibit characteristic plasmon resonances that can be exploited for sensing applications. The presented data demonstrate a novel functionality of LIPSS, while providing strong evidence of the capabilities of femtosecond double pulse irradiation as a valuable and low-cost tool for the precise fabrication of highly ordered structures.
△ Less
Submitted 23 March, 2023; v1 submitted 6 March, 2023;
originally announced March 2023.
-
Topological Darkness: How to Design a Metamaterial for Optical Biosensing with Virtually Unlimited Sensitivity
Authors:
G. Tselikov,
A. Danilov,
V. O. Shipunova,
S. M. Deyev,
A. V. Kabashin,
A. N. Grigorenko
Abstract:
Due to the absence of labels and fast analyses, optical biosensors promise major advances in biomedical diagnostics, security, environmental and food safety applications. However, sensitivity of the most advanced plasmonic biosensor implementations has a fundamental limitation caused by losses in the system and or geometry of biochips. Here, we report a scissor effect in topologically dark metamat…
▽ More
Due to the absence of labels and fast analyses, optical biosensors promise major advances in biomedical diagnostics, security, environmental and food safety applications. However, sensitivity of the most advanced plasmonic biosensor implementations has a fundamental limitation caused by losses in the system and or geometry of biochips. Here, we report a scissor effect in topologically dark metamaterials which is capable of providing virtually unlimited bona fide sensitivity to biosensing thus solving the bottleneck sensitivity limitation problem. We explain how the scissor effect can be realized via a proper design of topologically dark metamaterials and describe strategies for their fabrication. To validate the applicability of this effect in biosensing, we demonstrate the detection of folic acid (vitamin important for human health) in the wide 3-log linear dynamic range with the limit of detection of 0.125 nM, which is orders of magnitude better than previously reported for all optical counterparts. Our work opens possibilities for designing and realising plasmonic, semiconductor and dielectric metamaterials with ultra-sensitivity to binding events.
△ Less
Submitted 3 February, 2023;
originally announced February 2023.
-
Topological phase singularities in atomically thin high-refractive-index materials
Authors:
Georgy Ermolaev,
Kirill Voronin,
Denis G. Baranov,
Vasyl Kravets,
Gleb Tselikov,
Yury Stebunov,
Dmitry Yakubovsky,
Sergey Novikov,
Andrey Vyshnevyy,
Arslan Mazitov,
Ivan Kruglov,
Sergey Zhukov,
Roman Romanov,
Andrey M. Markeev,
Aleksey Arsenin,
Kostya S. Novoselov,
Alexander N. Grigorenko,
Valentyn Volkov
Abstract:
Atomically thin transition metal dichalcogenides (TMDCs) present a promising platform for numerous photonic applications due to excitonic spectral features, possibility to tune their constants by external gating, do**, or light, and mechanical stability. Utilization of such materials for sensing or optical modulation purposes would require a clever optical design, as by itself the 2D materials c…
▽ More
Atomically thin transition metal dichalcogenides (TMDCs) present a promising platform for numerous photonic applications due to excitonic spectral features, possibility to tune their constants by external gating, do**, or light, and mechanical stability. Utilization of such materials for sensing or optical modulation purposes would require a clever optical design, as by itself the 2D materials can offer only a small optical phase delay - consequence of the atomic thickness. To address this issue, we combine films of 2D semiconductors which exhibit excitonic lines with the Fabry-Perot resonators of the standard commercial SiO$_2$/Si substrate, in order to realize topological phase singularities in reflection. Around these singularities, reflection spectra demonstrate rapid phase changes while the structure behaves as a perfect absorber. Furthermore, we demonstrate that such topological phase singularities are ubiquitous for the entire class of atomically thin TMDCs and other high-refractive-index materials, making it a powerful tool for phase engineering in flat optics. As a practical demonstration, we employ PdSe$_2$ topological phase singularities for a refractive index sensor and demonstrate its superior phase sensitivity compared to typical surface plasmon resonance sensors.
△ Less
Submitted 23 June, 2021;
originally announced June 2021.
-
Giant optical anisotropy in transition metal dichalcogenides for next-generation photonics
Authors:
G. A. Ermolaev,
D. V. Grudinin,
Y. V. Stebunov,
K. V. Voronin,
V. G. Kravets,
J. Duan,
A. B. Mazitov,
G. I. Tselikov,
A. Bylinkin,
D. I. Yakubovsky,
S. M. Novikov,
D. G. Baranov,
A. Y. Nikitin,
I. A. Kruglov,
T. Shegai,
P. Alonso-González,
A. N. Grigorenko,
A. V. Arsenin,
K. S. Novoselov,
V. S. Volkov
Abstract:
Large optical anisotropy observed in a broad spectral range is of paramount importance for efficient light manipulation in countless devices. Although a giant anisotropy was recently observed in the mid-infrared wavelength range, for visible and near-infrared spectral intervals, the problem remains acute with the highest reported birefringence values of 0.8 in BaTiS3 and h-BN crystals. This inspir…
▽ More
Large optical anisotropy observed in a broad spectral range is of paramount importance for efficient light manipulation in countless devices. Although a giant anisotropy was recently observed in the mid-infrared wavelength range, for visible and near-infrared spectral intervals, the problem remains acute with the highest reported birefringence values of 0.8 in BaTiS3 and h-BN crystals. This inspired an intensive search for giant optical anisotropy among natural and artificial materials. Here, we demonstrate that layered transition metal dichalcogenides (TMDCs) provide an answer to this quest owing to their fundamental differences between intralayer strong covalent bonding and weak interlayer van der Walls interaction. To do this, we carried out a correlative far- and near-field characterization validated by first-principle calculations that reveals an unprecedented birefringence of 1.5 in the infrared and 3 in the visible light for MoS2. Our findings demonstrate that this outstanding anisotropy allows for tackling the diffraction limit enabling an avenue for on-chip next-generation photonics.
△ Less
Submitted 11 January, 2021; v1 submitted 1 June, 2020;
originally announced June 2020.
-
Two-dimensional covalent crystals by chemical conversion of thin van der Waals materials
Authors:
Vishnu Sreepal,
Mehmet Yagmurcukardes,
Kalangi S. Vasu,
Daniel J. Kelly,
Sarah F. R. Taylor,
Vasyl G. Kravets,
Zakhar Kudrynskyi,
Zakhar D. Kovalyuk,
Amalia Patanè,
Alexander N. Grigorenko,
Sarah J. Haigh,
Christopher Hardacre,
Laurence Eaves,
Hasan Sahin,
Andre K. Geim,
Francois M. Peeters,
Rahul R. Nair
Abstract:
Most of the studied two-dimensional (2D) materials have been obtained by exfoliation of van der Waals crystals. Recently, there has been growing interest in fabricating synthetic 2D crystals which have no layered bulk analogues. These efforts have been focused mainly on the surface growth of molecules in high vacuum. Here, we report an approach to making 2D crystals of covalent solids by chemical…
▽ More
Most of the studied two-dimensional (2D) materials have been obtained by exfoliation of van der Waals crystals. Recently, there has been growing interest in fabricating synthetic 2D crystals which have no layered bulk analogues. These efforts have been focused mainly on the surface growth of molecules in high vacuum. Here, we report an approach to making 2D crystals of covalent solids by chemical conversion of van der Waals layers. As an example, we use 2D indium selenide (InSe) obtained by exfoliation and converted it by direct fluorination into indium fluoride (InF3), which has a non-layered, rhombohedral structure and therefore cannot be possibly obtained by exfoliation. The conversion of InSe into InF3 is found to be feasible for thicknesses down to three layers of InSe, and the obtained stable InF3 layers are doped with selenium. We study this new 2D material by optical, electron transport and Raman measurements and show that it is a semiconductor with a direct bandgap of 2.2 eV, exhibiting high optical transparency across the visible and infrared spectral ranges. We also demonstrate the scalability of our approach by chemical conversion of large-area, thin InSe laminates obtained by liquid exfoliation into InF3 films. The concept of chemical conversion of cleavable thin van der Waals crystals into covalently-bonded non-cleavable ones opens exciting prospects for synthesizing a wide variety of novel atomically thin covalent crystals.
△ Less
Submitted 20 August, 2019;
originally announced August 2019.
-
Direct retrieval method of the effective permittivity and permeability of bulk semi-infinite metamaterials by variable-angle spectroscopic ellipsometry
Authors:
Quentin Flamant,
Daniel Torrent,
Sergio Gomez-Graña,
Alexander N. Grigorenko,
Vasyl G. Kravets,
Philippe Barois,
Virginie Ponsinet,
Alexandre Baron
Abstract:
In this work, we present a simple method for the direct retrieval of the effective permittivity and permeability of a bulk semi-infinite metamaterial from variable-angle spectroscopic ellipsometry measurements. Starting from the well-known Fresnel equations, we derive an analytical expression in which unknown coefficients are fitted to the experimental data using a linear regression model. The eff…
▽ More
In this work, we present a simple method for the direct retrieval of the effective permittivity and permeability of a bulk semi-infinite metamaterial from variable-angle spectroscopic ellipsometry measurements. Starting from the well-known Fresnel equations, we derive an analytical expression in which unknown coefficients are fitted to the experimental data using a linear regression model. The effective permittivity and permeability are then determined by solving a simple system and the correct solution is selected based on physical criteria. As an example, the method is applied to the case of a self-assembled metamaterial exhibiting strong isotropic optical magnetism.
△ Less
Submitted 14 May, 2019;
originally announced May 2019.
-
Strained bubbles in van der Waals heterostructures as local emitters of photoluminescence with adjustable wavelength
Authors:
Anastasia Tyurnina,
Denis Bandurin,
Ekaterina Khestanova,
Vasyl Kravets,
Maciej Koperski,
Francisco Guinea,
Alexander Grigorenko,
Andre Geim,
Irina Grigorieva
Abstract:
The possibility to tailor photoluminescence (PL) of monolayer transition metal dichalcogenides (TMDCs) using external factors such as strain, do** and external environment is of significant interest for optoelectronic applications. Strain in particular can be exploited as a means to continuously vary the bandgap. Micrometer-scale strain gradients were proposed for creating 'artificial atoms' tha…
▽ More
The possibility to tailor photoluminescence (PL) of monolayer transition metal dichalcogenides (TMDCs) using external factors such as strain, do** and external environment is of significant interest for optoelectronic applications. Strain in particular can be exploited as a means to continuously vary the bandgap. Micrometer-scale strain gradients were proposed for creating 'artificial atoms' that can utilize the so-called exciton funneling effect and work, for example, as exciton condensers. Here we describe room-temperature PL emitters that naturally occur whenever monolayer TMDC is deposited on an atomically flat substrate. These are hydrocarbon-filled bubbles which provide predictable, localized PL from well-separated submicron areas. Their emission energy is determined by the built-in strain controlled only by the substrate material, such that both the maximum strain and the strain profile are universal for all bubbles on a given substrate, i.e., independent of the bubble size. We show that for bubbles formed by monolayer MoS2, PL can be tuned between 1.72 to 1.81 eV by choosing bulk PtSe2, WS2, MoS2 or graphite as a substrate and its intensity is strongly enhanced by the funneling effect. Strong substrate-dependent quenching of the PL in areas of good contact between MoS2 and the substrate ensures localization of the luminescence to bubbles only; by employing optical reflectivity measurements we identify the mechanisms responsible for the quenching. Given the variety of available monolayer TMDCs and atomically flat substrates and the ease of creating such bubbles, our findings open a venue for making and studying the discussed light-emitting 'artificial atoms' that could be used in applications.
△ Less
Submitted 28 January, 2019;
originally announced January 2019.
-
Electrically controlled water permeation through graphene oxide membranes
Authors:
K. -G. Zhou,
K. S. Vasu,
C. T. Cherian,
M. Neek-Amal,
J. C. Zhang,
H. Ghorbanfekr-Kalashami,
K. Huang,
O. P. Marshall,
V. G. Kravets,
J. Abraham,
Y. Su,
A. N. Grigorenko,
A. Pratt,
A. K. Geim,
F. M. Peeters,
K. S. Novoselov,
R. R. Nair
Abstract:
Develo** 'smart' membranes that allow precise and reversible control of molecular permeation using external stimuli would be of intense interest for many areas of science: from physics and chemistry to life-sciences. In particular, electrical control of water permeation through membranes is a long-sought objective and is of crucial importance for healthcare and related areas. Currently, such adj…
▽ More
Develo** 'smart' membranes that allow precise and reversible control of molecular permeation using external stimuli would be of intense interest for many areas of science: from physics and chemistry to life-sciences. In particular, electrical control of water permeation through membranes is a long-sought objective and is of crucial importance for healthcare and related areas. Currently, such adjustable membranes are limited to the modulation of wetting of the membranes and controlled ion transport, but not the controlled mass flow of water. Despite intensive theoretical work yielding conflicting results, the experimental realisation of electrically controlled water permeation has not yet been achieved. Here we report electrically controlled water permeation through micrometre-thick graphene oxide (GO) membranes. By controllable electric breakdown, conductive filaments are created in the GO membrane. The electric field concentrated around such current carrying filaments leads to controllable ionisation of water molecules in graphene capillaries, allowing precise control of water permeation: from ultrafast permeation to complete blocking. Our work opens up an avenue for develo** smart membrane technologies and can revolutionize the field of artificial biological systems, tissue engineering and filtration.
△ Less
Submitted 16 May, 2018;
originally announced May 2018.
-
Giant photo-effect in proton transport through graphene membranes
Authors:
Marcelo Lozada-Hidalgo,
Sheng Zhang,
Sheng Hu,
Vasyl G. Kravets,
Francisco J. Rodriguez,
Alexey Berdyugin,
Alexander Grigorenko,
Andre K. Geim
Abstract:
Graphene has recently been shown to be permeable to thermal protons, the nuclei of hydrogen atoms, which sparked interest in its use as a proton-conducting membrane in relevant technologies. However, the influence of light on proton permeation remains unknown. Here we report that proton transport through Pt-nanoparticle-decorated graphene can be enhanced strongly by illuminating it with visible li…
▽ More
Graphene has recently been shown to be permeable to thermal protons, the nuclei of hydrogen atoms, which sparked interest in its use as a proton-conducting membrane in relevant technologies. However, the influence of light on proton permeation remains unknown. Here we report that proton transport through Pt-nanoparticle-decorated graphene can be enhanced strongly by illuminating it with visible light. Using electrical measurements and mass spectrometry, we find a photoresponsivity of 10^4 A W-1, which translates into a gain of 10^4 protons per photon with response times in the microsecond range. These characteristics are competitive with those of state-of-the-art photodetectors that are based on electron transport using silicon and novel two-dimensional materials. The photo-proton effect can be important for graphene's envisaged use in fuel cells and hydrogen isotope separation. Our observations can also be of interest for other applications such as light-induced water splitting, photocatalysis and novel photodetectors.
△ Less
Submitted 15 January, 2018;
originally announced January 2018.
-
Ultrathin graphene-based membrane with precise molecular sieving and ultrafast solvent permeation
Authors:
Q. Yang,
Y. Su,
C. Chi,
C. T. Cherian,
K. Huang,
V. G. Kravets,
F. C. Wang,
J. C. Zhang,
A. Pratt,
A. N. Grigorenko,
F. Guinea,
A. K Geim,
R. R. Nair
Abstract:
Graphene oxide (GO) membranes continue to attract intense interest due to their unique molecular sieving properties combined with fast permeation rates. However, the membranes' use has been limited mostly to aqueous solutions because GO membranes appear to be impermeable to organic solvents, a phenomenon not fully understood yet. Here, we report efficient and fast filtration of organic solutions t…
▽ More
Graphene oxide (GO) membranes continue to attract intense interest due to their unique molecular sieving properties combined with fast permeation rates. However, the membranes' use has been limited mostly to aqueous solutions because GO membranes appear to be impermeable to organic solvents, a phenomenon not fully understood yet. Here, we report efficient and fast filtration of organic solutions through GO laminates containing smooth two-dimensional (2D) capillaries made from flakes with large sizes of ~ 10-20 micron. Without sacrificing their sieving characteristics, such membranes can be made exceptionally thin, down to ~ 10 nm, which translates into fast permeation of not only water but also organic solvents. We attribute the organic solvent permeation and sieving properties of ultrathin GO laminates to the presence of randomly distributed pinholes that are interconnected by short graphene channels with a width of 1 nm. With increasing the membrane thickness, the organic solvent permeation rates decay exponentially but water continues to permeate fast, in agreement with previous reports. The application potential of our ultrathin laminates for organic-solvent nanofiltration is demonstrated by showing >99.9% rejection of various organic dyes with small molecular weights dissolved in methanol. Our work significantly expands possibilities for the use of GO membranes in purification, filtration and related technologies.
△ Less
Submitted 15 September, 2017;
originally announced October 2017.
-
Nonlinear light mixing by graphene plasmons
Authors:
D. Kundys,
B. Van Duppen,
O. P. Marshall,
F. Rodriguez,
I. Torre,
A. Tomadin,
M. Polini,
A. N. Grigorenko
Abstract:
Graphene is known to possess strong optical nonlinearity. Its nonlinear response can be further enhanced by graphene plasmons. Here, we report a novel nonlinear electro-absorption effect observed in nanostructured graphene due to excitation of graphene plasmons. We experimentally detect and theoretically explain enhanced nonlinear mixing of near-infrared and mid-infrared light in arrays of graphen…
▽ More
Graphene is known to possess strong optical nonlinearity. Its nonlinear response can be further enhanced by graphene plasmons. Here, we report a novel nonlinear electro-absorption effect observed in nanostructured graphene due to excitation of graphene plasmons. We experimentally detect and theoretically explain enhanced nonlinear mixing of near-infrared and mid-infrared light in arrays of graphene nanoribbons. Strong compression of light by graphene plasmons implies that the effect is non-local in nature and orders of magnitude larger than the conventional local graphene nonlinearity. The effect can be used in variety of applications including nonlinear light modulators, light multiplexors, light logic, and sensing devices.
△ Less
Submitted 26 May, 2017;
originally announced May 2017.
-
Hybrid graphene plasmonic waveguide modulators
Authors:
D. Ansell,
B. D. Thackray,
D. E. Aznakayeva,
P. Thomas,
G. H. Auton,
O. P. Marshall,
F. J. Rodriguez,
I. P. Radko,
Z. Han,
S. I. Bozhevolnyi,
A. N. Grigorenko
Abstract:
The unique optical and electronic properties of graphene allow one to realize active optical devices. While several types of graphene-based photonic modulators have already been demonstrated, the potential of combining the versatility of graphene with subwavelength field confinement of plasmonic/metallic structures is not fully realized. Here we report fabrication and study of hybrid graphene-plas…
▽ More
The unique optical and electronic properties of graphene allow one to realize active optical devices. While several types of graphene-based photonic modulators have already been demonstrated, the potential of combining the versatility of graphene with subwavelength field confinement of plasmonic/metallic structures is not fully realized. Here we report fabrication and study of hybrid graphene-plasmonic modulators. We consider several types of modulators and identify the most promising one for light modulation at telecom and near-infrared. Our proof-of-concept results pave the way towards on-chip realization of efficient graphene-based active plasmonic waveguide devices for optical communications.
△ Less
Submitted 15 September, 2016;
originally announced September 2016.
-
Hierarchical self-assembly of nanoparticles for optical metamaterials
Authors:
Sergio Gomez-Graña,
Aurélie Le Beulze,
Mona Treguer-Delapierre,
Stéphane Mornet,
Etienne Duguet,
Eftychia Grana,
Eric Cloutet,
Georges Hadziioannou,
Jacques Leng,
Jean-Baptiste Salmon,
Vasyl G. Kravets,
Alexander N. Grigorenko,
Naga A. Peyyety,
Virginie Ponsinet,
Philippe Richetti,
Alexandre Baron,
Daniel Torrent,
Philippe Barois
Abstract:
Hierarchical self-assembly arranges nanostructures at different length scales. It gradually becomes an effective method of fabricating artificial metamaterials from composite nanostructures tailored for a particular response. Hierarchical self-assembly overcomes shortcomings of "top-down" methods by significantly reducing fabrication time and making it possible to form bulk materials. Here we repo…
▽ More
Hierarchical self-assembly arranges nanostructures at different length scales. It gradually becomes an effective method of fabricating artificial metamaterials from composite nanostructures tailored for a particular response. Hierarchical self-assembly overcomes shortcomings of "top-down" methods by significantly reducing fabrication time and making it possible to form bulk materials. Here we report an application of hierarchical self-assembly of metal nanoparticles for the creation of the first isotropic optical metamaterial with strong artificial magnetism in blue light. We have used colloidal self-assembly to create artificial "nanomolecules" that generate the desired magnetic response and microfluidic self-assembly to produce a bulk metastructure. We demonstrate that the magnetic response of the final material is accurately described by an isotropic magnetic permeability that satisfies the principle of locality. Our approach unlocks the fabrication of large volumes of composite nanomaterials. Moreover, the spatial disorder inherent to this "bottom-up" method holds the key to solving the non-locality problem. The technique can be readily extended to the future generations of low-loss optical metamaterials made of dielectric nano-blocks to bypass the limitations of optical losses associated with plasmonic resonances in noble metals.
△ Less
Submitted 7 June, 2016;
originally announced June 2016.
-
Gain Modulation by Graphene Plasmons in Aperiodic Lattice Lasers
Authors:
S. Chakraborty,
O. P. Marshall,
T. G. Folland,
Y. -J. Kim,
A. N. Grigorenko,
K. S. Novoselov
Abstract:
Two-dimensional graphene plasmon-based technologies will enable the development of fast, compact and inexpensive active photonic elements because, unlike plasmons in other materials, graphene plasmons can be tuned via the do** level. Such tuning is harnessed within terahertz quantum cascade lasers to reversibly alter their emission. This is achieved in two key steps: First by exciting graphene p…
▽ More
Two-dimensional graphene plasmon-based technologies will enable the development of fast, compact and inexpensive active photonic elements because, unlike plasmons in other materials, graphene plasmons can be tuned via the do** level. Such tuning is harnessed within terahertz quantum cascade lasers to reversibly alter their emission. This is achieved in two key steps: First by exciting graphene plasmons within an aperiodic lattice laser and, second, by engineering photon lifetimes, linking graphene's Fermi energy with the round-trip gain. Modal gain and hence laser spectra are highly sensitive to the do** of an integrated, electrically controllable, graphene layer. Demonstration of the integrated graphene plasmon laser principle lays the foundation for a new generation of active, programmable plasmonic metamaterials with major implications across photonics, material sciences and nanotechnology.
△ Less
Submitted 14 February, 2016;
originally announced February 2016.
-
Current-induced birefringent absorption and non-reciprocal plasmons in graphene
Authors:
Ben Van Duppen,
Andrea Tomadin,
Alexander N. Grigorenko,
Marco Polini
Abstract:
We present extensive calculations of the optical and plasmonic properties of a graphene sheet carrying a dc current. By calculating analytically the density-density response function of current-carrying states at finite temperature, we demonstrate that an applied dc current modifies the Pauli blocking mechanism and that absorption acquires a birefringent character with respect to the angle between…
▽ More
We present extensive calculations of the optical and plasmonic properties of a graphene sheet carrying a dc current. By calculating analytically the density-density response function of current-carrying states at finite temperature, we demonstrate that an applied dc current modifies the Pauli blocking mechanism and that absorption acquires a birefringent character with respect to the angle between the in-plane light polarization and current flow. Employing the random phase approximation at finite temperature, we show that graphene plasmons display a degree of non-reciprocity and collimation that can be tuned with the applied current. We discuss the possibility to measure these effects.
△ Less
Submitted 28 February, 2016; v1 submitted 21 December, 2015;
originally announced December 2015.
-
Sieving hydrogen isotopes through two dimensional crystals
Authors:
M. Lozada-Hidalgo,
S. Hu,
O. Marshall,
A. Mishchenko,
A. N. Grigorenko,
R. A. W. Dryfe,
B. Radha,
I. V. Grigorieva,
A. K. Geim
Abstract:
One-atom-thick crystals are impermeable to atoms and molecules, but hydrogen ions (thermal protons) penetrate through them. We show that monolayers of graphene and boron nitride can be used to separate hydrogen ion isotopes. Employing electrical measurements and mass spectrometry, we find that deuterons permeate through these crystals much slower than protons, resulting in a separation factor of ~…
▽ More
One-atom-thick crystals are impermeable to atoms and molecules, but hydrogen ions (thermal protons) penetrate through them. We show that monolayers of graphene and boron nitride can be used to separate hydrogen ion isotopes. Employing electrical measurements and mass spectrometry, we find that deuterons permeate through these crystals much slower than protons, resulting in a separation factor of ~10 at room temperature. The isotope effect is attributed to a difference of about 60 meV between zero-point energies of incident protons and deuterons, which translates into the equivalent difference in the activation barriers posed by two dimensional crystals. In addition to providing insight into the proton transport mechanism, the demonstrated approach offers a competitive and scalable way for hydrogen isotope enrichment.
△ Less
Submitted 2 January, 2016; v1 submitted 20 November, 2015;
originally announced November 2015.
-
Superconductivity in Ca-doped graphene
Authors:
J. Chapman,
Y. Su,
C. A. Howard,
D. Kundys,
A. Grigorenko,
F. Guinea,
A. K. Geim,
I. V. Grigorieva,
R. R. Nair
Abstract:
Graphene, a zero-gap semimetal, can be transformed into a metallic, semiconducting or insulating state by either physical or chemical modification. Superconductivity is conspicuously missing among these states despite considerable experimental efforts as well as many theoretical proposals. Here, we report superconductivity in calcium-decorated graphene achieved by intercalation of graphene laminat…
▽ More
Graphene, a zero-gap semimetal, can be transformed into a metallic, semiconducting or insulating state by either physical or chemical modification. Superconductivity is conspicuously missing among these states despite considerable experimental efforts as well as many theoretical proposals. Here, we report superconductivity in calcium-decorated graphene achieved by intercalation of graphene laminates that consist of well separated and electronically decoupled graphene crystals. In contrast to intercalated graphite, we find that Ca is the only dopant that induces superconductivity in graphene laminates above 1.8 K among intercalants used in our experiments such as potassium, caesium and lithium. Ca-decorated graphene becomes superconducting at ~ 6 K and the transition temperature is found to be strongly dependent on the confinement of the Ca layer and the induced charge carrier concentration. In addition to the first evidence for superconducting graphene, our work shows a possibility of inducing and studying superconductivity in other 2D materials using their laminates.
△ Less
Submitted 27 August, 2015;
originally announced August 2015.
-
A new class of photo-catalytic materials and a novel principle for efficient water splitting under infrared and visible light - MgB2 as unexpected example
Authors:
V. G. Kravets,
A. N. Grigorenko
Abstract:
Water splitting is unanimously recognized as environment friendly, potentially low cost and renewable energy solution based on the future hydrogen economy. Especially appealing is photo-catalytic water splitting whereby a suitably chosen catalyst dramatically improves efficiency of the hydrogen production driven by direct sunlight and allows it to happen even at zero driving potential. Here, we su…
▽ More
Water splitting is unanimously recognized as environment friendly, potentially low cost and renewable energy solution based on the future hydrogen economy. Especially appealing is photo-catalytic water splitting whereby a suitably chosen catalyst dramatically improves efficiency of the hydrogen production driven by direct sunlight and allows it to happen even at zero driving potential. Here, we suggest a new class of stable photo-catalysts and the corresponding principle for catalytic water splitting in which infrared and visible light play the main role in producing the photocurrent and hydrogen. The new class of catalysts based on ionic binary metals with layered graphite-like structures which effectively absorb visible and infrared light facilitating the reaction of water splitting, suppress the inverse reaction of ion recombination by separating ions due to internal electric fields existing near alternating layers, provide the sites for ion trap** of both polarities, and finally deliver the electrons and holes required to generate hydrogen and oxygen gases. As an example, we demonstrate conversion efficiency of 27 percent at bias voltage bias 0.5 V for magnesium di-boride working as a catalyst for photo-induced water splitting. We discuss its advantages over some existing materials and propose the underlying mechanism of photo-catalytic water splitting by binary layered metals.
△ Less
Submitted 31 July, 2015;
originally announced July 2015.
-
Graphene-protected copper and silver plasmonics
Authors:
V. G. Kravets,
R. Jalil,
Y. -J. Kim,
D. Ansell,
D. E. Aznakayeva,
B. Thackray,
L. Britnell,
B. D. Belle,
F. Withers,
I. P. Radko,
Z. Han,
S. I. Bozhevolnyi,
K. S. Novoselov,
A. K. Geim,
A. N. Grigorenko
Abstract:
Plasmonics has established itself as a branch of physics which promises to revolutionize data processing, improve photovoltaics, increase sensitivity of bio-detection. A widespread use of plasmonic devices is notably hindered (in addition to high losses) by the absence of stable and inexpensive metal films suitable for plasmonic applications. This may seem surprising given the number of metal comp…
▽ More
Plasmonics has established itself as a branch of physics which promises to revolutionize data processing, improve photovoltaics, increase sensitivity of bio-detection. A widespread use of plasmonic devices is notably hindered (in addition to high losses) by the absence of stable and inexpensive metal films suitable for plasmonic applications. This may seem surprising given the number of metal compounds to choose from. Unfortunately, most of them either exhibit a strong dam** of surface plasmons or easily oxidize and corrode. To this end, there has been continuous search for alternative plasmonic materials that are, unlike gold, the current metal of choice in plasmonics, compatible with complementary metal oxide semiconductor technology. Here we show that copper and silver protected by graphene are viable candidates. Copper films covered with one to a few graphene layers show excellent plasmonics characteristics surpassing those of gold films. They can be used to fabricate plasmonic devices and survive for at least a year, even in wet and corroding conditions. As a proof of concept, we use the graphene-protected copper to demonstrate dielectric loaded plasmonic waveguides and test sensitivity of surface plasmon resonances. Our results are likely to initiate a wide use of graphene-protected plasmonics.
△ Less
Submitted 6 October, 2014;
originally announced October 2014.
-
Particles, fields and a canonical distance form
Authors:
A. N. Grigorenko
Abstract:
We examine a notion of an elementary particle in classical physics and suggest that its existence requires non-trivial homotopy of space-time. We show that non-trivial homotopy may naturally arise for space-times in which metric relations are generated by a canonical distance form factorized by a Weyl field. Some consequences of the presence of a Weyl field are discussed.
We examine a notion of an elementary particle in classical physics and suggest that its existence requires non-trivial homotopy of space-time. We show that non-trivial homotopy may naturally arise for space-times in which metric relations are generated by a canonical distance form factorized by a Weyl field. Some consequences of the presence of a Weyl field are discussed.
△ Less
Submitted 17 April, 2014;
originally announced May 2014.
-
Singular-phase nanooptics: towards label-free single molecule detection
Authors:
V. G. Kravets,
F. Schedin,
R. Jalil,
L. Britnell,
R. V. Gorbachev,
D. Ansell,
B. Thackray,
K. S. Novoselov,
A. K. Geim,
A. V. Kabashin,
A. N. Grigorenko
Abstract:
Non-trivial topology of phase is crucial for many important physics phenomena such as, for example, the Aharonov-Bohm effect 1 and the Berry phase 2. Light phase allows one to create "twisted" photons 3, 4 , vortex knots 5, dislocations 6 which has led to an emerging field of singular optics relying on abrupt phase changes 7. Here we demonstrate the feasibility of singular visible-light nanooptics…
▽ More
Non-trivial topology of phase is crucial for many important physics phenomena such as, for example, the Aharonov-Bohm effect 1 and the Berry phase 2. Light phase allows one to create "twisted" photons 3, 4 , vortex knots 5, dislocations 6 which has led to an emerging field of singular optics relying on abrupt phase changes 7. Here we demonstrate the feasibility of singular visible-light nanooptics which exploits the benefits of both plasmonic field enhancement and non-trivial topology of light phase. We show that properly designed plasmonic nanomaterials exhibit topologically protected singular phase behaviour which can be employed to radically improve sensitivity of detectors based on plasmon resonances. By using reversible hydrogenation of graphene 8 and a streptavidin-biotin test 9, we demonstrate areal mass sensitivity at a level of femto-grams per mm2 and detection of individual biomolecules, respectively. Our proof-of-concept results offer a way towards simple and scalable single-molecular label-free biosensing technologies.
△ Less
Submitted 16 April, 2014;
originally announced April 2014.
-
Graphene plasmonics
Authors:
A. N. Grigorenko,
Marco Polini,
K. S. Novoselov
Abstract:
Two rich and vibrant fields of investigation, graphene physics and plasmonics, strongly overlap. Not only does graphene possess intrinsic plasmons that are tunable and adjustable, but a combination of graphene with noble-metal nanostructures promises a variety of exciting applications for conventional plasmonics. The versatility of graphene means that graphene-based plasmonics may enable the manuf…
▽ More
Two rich and vibrant fields of investigation, graphene physics and plasmonics, strongly overlap. Not only does graphene possess intrinsic plasmons that are tunable and adjustable, but a combination of graphene with noble-metal nanostructures promises a variety of exciting applications for conventional plasmonics. The versatility of graphene means that graphene-based plasmonics may enable the manufacture of novel optical devices working in different frequency ranges, from terahertz to the visible, with extremely high speed, low driving voltage, low power consumption and compact sizes. Here we review the field emerging at the intersection of graphene physics and plasmonics.
△ Less
Submitted 17 January, 2013;
originally announced January 2013.
-
Strong Plasmonic Enhancement of Photovoltage in Graphene
Authors:
T. J. Echtermeyer,
L. Britnell,
P. K. Jasnos,
A. Lombardo,
R. V. Gorbachev,
A. N. Grigorenko,
A. K. Geim,
A. C. Ferrari,
K. S. Novoselov
Abstract:
Amongst the wide spectrum of potential applications of graphene, ranging from transistors and chemical-sensors to nanoelectromechanical devices and composites, the field of photonics and optoelectronics is believed to be one of the most promising. Indeed, graphene's suitability for high-speed photodetection was demonstrated in an optical communication link operating at 10 Gbit/s\cite. However, the…
▽ More
Amongst the wide spectrum of potential applications of graphene, ranging from transistors and chemical-sensors to nanoelectromechanical devices and composites, the field of photonics and optoelectronics is believed to be one of the most promising. Indeed, graphene's suitability for high-speed photodetection was demonstrated in an optical communication link operating at 10 Gbit/s\cite. However, the low responsivity of graphene-based photodetectors compared to traditional III-V based ones is a potential drawback. Here we show that, by combining graphene with plasmonic nanostructures, the efficiency of graphene-based photodectors can be increased by up to 20 times, due to field concentration in the area of a p-n junction. Additionally, wavelength and polarization selectivity can be achieved employing nanostructures of different geometries.
△ Less
Submitted 21 July, 2011;
originally announced July 2011.
-
Fluorographene: Two Dimensional Counterpart of Teflon
Authors:
R. R. Nair,
W. C. Ren,
R. Jalil,
I. Riaz,
V. G. Kravets,
L. Britnell,
P. Blake,
F. Schedin,
A. S. Mayorov,
S. Yuan,
M. I. Katsnelson,
H. M. Cheng,
W. Strupinski,
L. G. Bulusheva,
A. V. Okotrub,
I. V. Grigorieva,
A. N. Grigorenko,
K. S. Novoselov,
A. K. Geim
Abstract:
We report a stoichiometric derivative of graphene with a fluorine atom attached to each carbon. Raman, optical, structural, micromechanical and transport studies show that the material is qualitatively different from the known graphene-based nonstoichiometric derivatives. Fluorographene is a high-quality insulator (resistivity >10^12 Ohm per square) with an optical gap of 3 eV. It inherits the mec…
▽ More
We report a stoichiometric derivative of graphene with a fluorine atom attached to each carbon. Raman, optical, structural, micromechanical and transport studies show that the material is qualitatively different from the known graphene-based nonstoichiometric derivatives. Fluorographene is a high-quality insulator (resistivity >10^12 Ohm per square) with an optical gap of 3 eV. It inherits the mechanical strength of graphene, exhibiting Young's modulus of 100 N/m and sustaining strains of 15%. Fluorographene is inert and stable up to 400C even in air, similar to Teflon.
△ Less
Submitted 28 September, 2010; v1 submitted 15 June, 2010;
originally announced June 2010.
-
Surface Enhanced Raman Spectroscopy of Graphene
Authors:
F. Schedin,
E. Lidorikis,
A. Lombardo,
V. G. Kravets,
A. K. Geim,
A. N. Grigorenko,
K. S. Novoselov,
A. C. Ferrari
Abstract:
Surface enhanced Raman scattering (SERS) exploits surface plasmons induced by the incident field in metallic nanostructures to significantly increase the Raman intensity. Graphene provides the ideal prototype two dimensional (2d) test material to investigate SERS. Its Raman spectrum is well known, graphene samples are entirely reproducible, height controllable down to the atomic scale, and can be…
▽ More
Surface enhanced Raman scattering (SERS) exploits surface plasmons induced by the incident field in metallic nanostructures to significantly increase the Raman intensity. Graphene provides the ideal prototype two dimensional (2d) test material to investigate SERS. Its Raman spectrum is well known, graphene samples are entirely reproducible, height controllable down to the atomic scale, and can be made virtually defect-free. We report SERS from graphene, by depositing arrays of Au particles of well defined dimensions on graphene/SiO$_2$(300nm)/Si. We detect significant enhancements at 633nm. To elucidate the physics of SERS, we develop a quantitative analytical and numerical theory. The 2d nature of graphene allows for a closed-form description of the Raman enhancement. This scales with the nanoparticle cross section, the fourth power of the Mie enhancement, and is inversely proportional to the tenth power of the separation between graphene and the nanoparticle. One consequence is that metallic nanodisks are an ideal embodiment for SERS in 2d.
△ Less
Submitted 18 May, 2010;
originally announced May 2010.
-
Sensitivity of Collective Plasmon Modes of Gold Nanoresonators to Local Environment
Authors:
V. G. Kravets,
F. Schedin,
A. V. Kabashin,
A. N. Grigorenko
Abstract:
We present the first experimental study of optical response of collective plasmon resonances in regular arrays of nanoresonators to local environment. Recently observed collective plasmon modes arise due to diffractive coupling of localised plasmons and yield almost an order of magnitude improvement in resonance quality. We measure the response of these modes to tiny variations of the refractive i…
▽ More
We present the first experimental study of optical response of collective plasmon resonances in regular arrays of nanoresonators to local environment. Recently observed collective plasmon modes arise due to diffractive coupling of localised plasmons and yield almost an order of magnitude improvement in resonance quality. We measure the response of these modes to tiny variations of the refractive index of both gaseous and liquid media. We show that the phase sensitivity of the collective resonances can be more than two orders of magnitude better than the best amplitude sensitivity of the same nanodot array as well as an order of magnitude better than the phase sensitivity in SPR sensors.
△ Less
Submitted 12 March, 2010;
originally announced March 2010.
-
Spectroscopic ellipsometry of graphene and an exciton-shifted van Hove peak in absorption
Authors:
V. G. Kravets,
A. N. Grigorenko,
R. R. Nair,
P. Blake,
S. Anissimova,
K. S. Novoselov,
A. K. Geim
Abstract:
We demonstrate that optical transparency of any two-dimensional system with a symmetric electronic spectrum is governed by the fine structure constant and suggest a simple formula that relates a quasi-particle spectrum to an optical absorption of such a system. These results are applied to graphene deposited on a surface of oxidized silicon for which we measure ellipsometric spectra, extract optic…
▽ More
We demonstrate that optical transparency of any two-dimensional system with a symmetric electronic spectrum is governed by the fine structure constant and suggest a simple formula that relates a quasi-particle spectrum to an optical absorption of such a system. These results are applied to graphene deposited on a surface of oxidized silicon for which we measure ellipsometric spectra, extract optical constants of a graphene layer and reconstruct the electronic dispersion relation near the K point using optical transmission spectra. We also present spectroscopic ellipsometry analysis of graphene placed on amorphous quartz substrates and report a pronounced peak in ultraviolet absorption at 4.6 eV because of a van Hove singularity in graphene's density of states. The peak is downshifted by 0.5 eV probably due to excitonic effects.
△ Less
Submitted 6 April, 2010; v1 submitted 12 March, 2010;
originally announced March 2010.
-
Universal Dynamic Conductivity and Quantized Visible Opacity of Suspended Graphene
Authors:
R. R. Nair,
P. Blake,
A. N. Grigorenko,
K. S. Novoselov,
T. J. Booth,
T. Stauber,
N. M. R. Peres,
A. K. Geim
Abstract:
We show that the optical transparency of suspended graphene is defined by the fine structure constant, alpha, the parameter that describes coupling between light and relativistic electrons and is traditionally associated with quantum electrodynamics rather than condensed matter physics. Despite being only one atom thick, graphene is found to absorb a significant (pi times alpha=2.3%) fraction of…
▽ More
We show that the optical transparency of suspended graphene is defined by the fine structure constant, alpha, the parameter that describes coupling between light and relativistic electrons and is traditionally associated with quantum electrodynamics rather than condensed matter physics. Despite being only one atom thick, graphene is found to absorb a significant (pi times alpha=2.3%) fraction of incident white light, which is a consequence of graphene's unique electronic structure. This value translates into universal dynamic conductivity G =e^2/4h_bar within a few percent accuracy.
△ Less
Submitted 26 March, 2008;
originally announced March 2008.
-
Reply to comment by A.V. Kildishev et al. [physics/0609234] and V. M. Shalaev et al. [Opt. Lett. 30, 3345 (2005)]
Authors:
A. N. Grigorenko
Abstract:
We discuss the claims of the comment at arXiv.org:physics/0609234. We show that A.V. Kildishev et al. misread our method of extracting of optical constants of nanostructured films. The theoretical calculations performed in the comment appear to be in a direct contradiction with an experiment. We demonstrate that the theoretical calculations suggested being free from ambiguities (V.M. Shalaev et…
▽ More
We discuss the claims of the comment at arXiv.org:physics/0609234. We show that A.V. Kildishev et al. misread our method of extracting of optical constants of nanostructured films. The theoretical calculations performed in the comment appear to be in a direct contradiction with an experiment. We demonstrate that the theoretical calculations suggested being free from ambiguities (V.M. Shalaev et al., Opt. Lett. 30, 3345 (2005)) require an additional experimental verification, which can be performed by observing physical effects of negative refraction.
△ Less
Submitted 20 December, 2006; v1 submitted 3 December, 2006;
originally announced December 2006.
-
Room temperature tunneling anisotropic and collinear magnetoresistance
Authors:
A. N. Grigorenko,
K. S. Novoselov,
D. J. Mapps
Abstract:
We report a room temperature tunneling anisotropic magnetoresistance in Co/Al2O3/NiFe junctions containing magnetic electrodes oxidized prior to forming the Al2O3 layer. A significant change in a tunnel magnetoresistance is observed when the layer magnetizations are rotated collinearly in the junction plane by an applied external field. The angular dependence of the tunneling anisotropic magneto…
▽ More
We report a room temperature tunneling anisotropic magnetoresistance in Co/Al2O3/NiFe junctions containing magnetic electrodes oxidized prior to forming the Al2O3 layer. A significant change in a tunnel magnetoresistance is observed when the layer magnetizations are rotated collinearly in the junction plane by an applied external field. The angular dependence of the tunneling anisotropic magnetoresistance could be explained by the presence of an antiferromagnetic oxide layer formed within the barrier.
△ Less
Submitted 29 November, 2006;
originally announced November 2006.
-
An antisymmetric plasmon resonance in coupled gold nanoparticles as a sensitive tool for detection of local index of refraction
Authors:
A. N. Grigorenko,
H. F. Gleeson,
Y. Zhang,
N. W. Roberts,
A. R. Sidorov,
A. A. Panteleev
Abstract:
A nanofabricated regular array of coupled gold nano-pillars is employed to detect local indices of refraction of different liquids using a shift of an antisymmetric plasmon resonance peak observed in the reflection spectra. The peak spectral position is found to be a unique function of the local refractive index for a wide range of indices. We discuss possible applications of the fabricated nano…
▽ More
A nanofabricated regular array of coupled gold nano-pillars is employed to detect local indices of refraction of different liquids using a shift of an antisymmetric plasmon resonance peak observed in the reflection spectra. The peak spectral position is found to be a unique function of the local refractive index for a wide range of indices. We discuss possible applications of the fabricated nanostructured arrays in bio and chemical sensors.
△ Less
Submitted 31 March, 2006;
originally announced March 2006.
-
Nanometric laser trap** based on nanostructured substrates
Authors:
A. R. Sidorov,
Y. Zhang,
A. N. Grigorenko,
M. R. Dickinson
Abstract:
Laser trap** near the surface of a nanostructured substrate is demonstrated. Stable microbubbles with radii of 1-20micrometers have been created and manipulated with sub-micron precision by a focused laser beam in an immersion oil covering arrays of pairs of gold nanopillars deposited on a glass substrate. The threshold for bubble creation and trap** characteristics depended on near-field co…
▽ More
Laser trap** near the surface of a nanostructured substrate is demonstrated. Stable microbubbles with radii of 1-20micrometers have been created and manipulated with sub-micron precision by a focused laser beam in an immersion oil covering arrays of pairs of gold nanopillars deposited on a glass substrate. The threshold for bubble creation and trap** characteristics depended on near-field coupling of nanopillars. The nanometric laser tweezers showed giant trap** efficiency of Q~50 for the trapped microbubbles.
△ Less
Submitted 25 March, 2006;
originally announced March 2006.
-
Negative Refractive Index in Artificial Metamaterials
Authors:
A. N. Grigorenko
Abstract:
We discuss optical constants in artificial metamaterials showing negative magnetic permeability and electric permittivity. Using effective field theory, we calculate effective permeability of nanofabricated media composed of pairs of identical gold nano-pillars with magnetic response in the visible spectrum.
We discuss optical constants in artificial metamaterials showing negative magnetic permeability and electric permittivity. Using effective field theory, we calculate effective permeability of nanofabricated media composed of pairs of identical gold nano-pillars with magnetic response in the visible spectrum.
△ Less
Submitted 15 January, 2007; v1 submitted 25 March, 2006;
originally announced March 2006.
-
Nanofabricated media with negative permeability at visible frequencies
Authors:
A. N. Grigorenko,
H. F. Gleeson,
Y. Zhang,
A. A. Firsov,
I. Y. Khrushchev,
J. Petrovic
Abstract:
We report a nanofabricated medium made of electromagnetically coupled pairs of gold dots with geometry carefully designed at a 10-nm level. The medium exhibits strong magnetic response at visible-light frequencies, including bands with negative μ. The magnetism arises due to the excitation of quadrupole plasmon resonances. Our approach shows for the first time the feasibility of magnetism at opt…
▽ More
We report a nanofabricated medium made of electromagnetically coupled pairs of gold dots with geometry carefully designed at a 10-nm level. The medium exhibits strong magnetic response at visible-light frequencies, including bands with negative μ. The magnetism arises due to the excitation of quadrupole plasmon resonances. Our approach shows for the first time the feasibility of magnetism at optical frequencies and paves a way towards magnetic and left-handed components for visible optics.
△ Less
Submitted 25 April, 2005;
originally announced April 2005.
-
Optimized design of universal two-qubit gates
Authors:
I. A. Grigorenko,
D. V. Khveshchenko
Abstract:
We construct optimized implementations of the CNOT and other universal two-qubit gates that, unlike many of the previously proposed protocols, are carried out in a single step. The new protocols require tunable inter-qubit couplings but, in return, show a significant improvements in the quality of gate operations. Our optimization procedure can be further extended to the combinations of elementa…
▽ More
We construct optimized implementations of the CNOT and other universal two-qubit gates that, unlike many of the previously proposed protocols, are carried out in a single step. The new protocols require tunable inter-qubit couplings but, in return, show a significant improvements in the quality of gate operations. Our optimization procedure can be further extended to the combinations of elementary two-qubit as well as irreducible many-qubit gates.
△ Less
Submitted 10 December, 2004;
originally announced December 2004.
-
Geodesics and distance in classical physics
Authors:
A. N. Grigorenko
Abstract:
We formulate geodesics on a manifold in terms of a parallel transfer of a particle state vector transformed by local Lorentz and Yang-Mills symmetry groups. This formulation leads to an introduction of a canonical one-form the eigenvalues of which define distance on a manifold. We suggest an action based on the canonical distance form and apply it to describe classical particles with spin. Argumen…
▽ More
We formulate geodesics on a manifold in terms of a parallel transfer of a particle state vector transformed by local Lorentz and Yang-Mills symmetry groups. This formulation leads to an introduction of a canonical one-form the eigenvalues of which define distance on a manifold. We suggest an action based on the canonical distance form and apply it to describe classical particles with spin. Arguments are presented in favour of scaling distance in the space-time with a scalar field.
△ Less
Submitted 16 April, 2014; v1 submitted 25 September, 2004;
originally announced September 2004.
-
Robust two-qubit quantum registers
Authors:
I. A. Grigorenko,
D. V. Khveshchenko
Abstract:
We carry out a systematic analysis of a pair of coupled qubits, each of which is subject to its own dissipative environment, and argue that a combination of the inter-qubit couplings which provides for the lowest possible decoherence rates corresponds to the incidence of a double spectral degeneracy in the two-qubit system. We support this general argument by the results of of an evolutionary ge…
▽ More
We carry out a systematic analysis of a pair of coupled qubits, each of which is subject to its own dissipative environment, and argue that a combination of the inter-qubit couplings which provides for the lowest possible decoherence rates corresponds to the incidence of a double spectral degeneracy in the two-qubit system. We support this general argument by the results of of an evolutionary genetic algorithm which can also be used for optimizing time-dependent processes (gates) and their sequences that implement various quantum computing protocols.
△ Less
Submitted 29 December, 2004; v1 submitted 15 December, 2003;
originally announced December 2003.
-
Crossed-anisotropy films for magnetic tunnel junctions and magnetic memory applications
Authors:
A. N. Grigorenko,
D. J. Mapps
Abstract:
A prototype of magnetoresistive random access memory (MRAM) based on magnetic tunnel junctions (MTJ) was fabricated with crossed-anisotropy of magnetic layers on either side of the tunnelling barrier layer. It is demonstrated that the introduction of crossed-anisotropy results in smaller switching fields and better switching times compared to the conventional case of aligned anisotropies. The ma…
▽ More
A prototype of magnetoresistive random access memory (MRAM) based on magnetic tunnel junctions (MTJ) was fabricated with crossed-anisotropy of magnetic layers on either side of the tunnelling barrier layer. It is demonstrated that the introduction of crossed-anisotropy results in smaller switching fields and better switching times compared to the conventional case of aligned anisotropies. The magnetoresistive properties of fabricated devices are in good agreement with the micromagnetic model.
△ Less
Submitted 25 September, 2002;
originally announced September 2002.
-
Optomagnetic composite medium with conducting nanoelements
Authors:
L. V. Panina,
A. N. Grigorenko,
D. P. Makhnovskiy
Abstract:
A new type of metal-dielectric composites has been proposed that is characterised by a resonance-like behaviour of the effective permeability in the infrared and visible spectral ranges. This material can be referred to as optomagnetic medium. The analytical formalism developed is based on solving the scattering problem for considered inclusions with impedance boundary condition, which yields th…
▽ More
A new type of metal-dielectric composites has been proposed that is characterised by a resonance-like behaviour of the effective permeability in the infrared and visible spectral ranges. This material can be referred to as optomagnetic medium. The analytical formalism developed is based on solving the scattering problem for considered inclusions with impedance boundary condition, which yields the current and charge distributions within the inclusions. The presence of the effective magnetic permeability and its resonant properties lead to novel optical effects and open new possible applications.
△ Less
Submitted 25 September, 2002; v1 submitted 15 May, 2002;
originally announced May 2002.