Showing 1–40 of 40 results for author: Griffith, B E

Flagellum Pum** Efficacy in Shear-Thinning Viscoelastic Fluids

Authors: Aaron Barrett, Aaron L. Fogelson, M. Gregory Forest, Cole Gruninger, Sookkyung Lim, Boyce E. Griffith

Abstract: Microorganism motility often takes place within complex, viscoelastic fluid environments, e.g., sperm in cervicovaginal mucus and bacteria in biofilms. In such complex fluids, strains and stresses generated by the microorganism are stored and relax across a spectrum of length and time scales and the complex fluid can be driven out of its linear response regime. Phenomena not possible in viscous me… ▽ More Microorganism motility often takes place within complex, viscoelastic fluid environments, e.g., sperm in cervicovaginal mucus and bacteria in biofilms. In such complex fluids, strains and stresses generated by the microorganism are stored and relax across a spectrum of length and time scales and the complex fluid can be driven out of its linear response regime. Phenomena not possible in viscous media thereby arise from feedback between the "swimmer" and the complex fluid, making swimming efficiency co-dependent on the propulsion mechanism and fluid properties. Here we parameterize a flagellar motor and filament properties together with elastic relaxation and nonlinear shear-thinning properties of the fluid in a computational immersed boundary model. We then explore swimming efficiency over this parameter space. One exemplary insight is that motor efficiency (measured by the volumetric flow rate) can be boosted vs.\ degraded by moderate vs.\ strong shear-thinning of the viscoelastic environment. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Comments: 15 pages, 8 figures

Benchmarking the Immersed Boundary Method for Viscoelastic Flows

Authors: Cole Gruninger, Aaron Barrett, Fuhui Fang, M. Gregory Forest, Boyce E. Griffith

Abstract: We present and analyze a series of benchmark tests regarding the application of the immersed boundary (IB) method to viscoelastic flows through and around non-trivial, stationary geometries. The IB method is widely used for the simulation of biological fluid dynamics and other modeling scenarios where a structure is immersed in a fluid. Although the IB method has been most commonly used to model s… ▽ More We present and analyze a series of benchmark tests regarding the application of the immersed boundary (IB) method to viscoelastic flows through and around non-trivial, stationary geometries. The IB method is widely used for the simulation of biological fluid dynamics and other modeling scenarios where a structure is immersed in a fluid. Although the IB method has been most commonly used to model systems with viscous incompressible fluids, it also can be applied to visoelastic fluids, and has enabled the study of a wide variety of dynamical problems including the settling of vesicles and the swimming of elastic filaments in fluids modeled by the Oldroyd-B constuitive equation. However, to date, relatively little work has explored the accuracy or convergence properties of the numerical scheme. Herein, we present benchmarking results for an IB solver applied to viscoelastic flows in and around non-trivial geometries using the idealized Oldroyd-B and more realistic, polymer-entanglement-based Rolie-Poly constitutive equations. We use two-dimensional numerical test cases along with results from rheology experiments to benchmark the IB method and compare it to more complex finite element and finite volume viscoelastic flow solvers. Additionally, we analyze different choices of regularized delta function and relative Lagrangian grid spacings which allow us to identify and recommend the key choices of these numerical parameters depending on the present flow regime. △ Less

Submitted 14 January, 2024; v1 submitted 1 September, 2023; originally announced September 2023.

Comments: 31 pages, 15 figures

Simulating Cardiac Fluid Dynamics in the Human Heart

Authors: Marshall Davey, Charles Puelz, Simone Rossi, Margaret Anne Smith, David R. Wells, Greg Sturgeon, W. Paul Segars, John P. Vavalle, Charles S. Peskin, Boyce E. Griffith

Abstract: Cardiac fluid dynamics fundamentally involves interactions between complex blood flows and the structural deformations of the muscular heart walls and the thin, flexible valve leaflets. There has been longstanding scientific, engineering, and medical interest in creating mathematical models of the heart that capture, explain, and predict these fluid-structure interactions. However, existing comput… ▽ More Cardiac fluid dynamics fundamentally involves interactions between complex blood flows and the structural deformations of the muscular heart walls and the thin, flexible valve leaflets. There has been longstanding scientific, engineering, and medical interest in creating mathematical models of the heart that capture, explain, and predict these fluid-structure interactions. However, existing computational models that account for interactions among the blood, the actively contracting myocardium, and the cardiac valves are limited in their abilities to predict valve performance, resolve fine-scale flow features, or use realistic descriptions of tissue biomechanics. Here we introduce and benchmark a comprehensive mathematical model of cardiac fluid dynamics in the human heart. A unique feature of our model is that it incorporates biomechanically detailed descriptions of all major cardiac structures that are calibrated using tensile tests of human tissue specimens to reflect the heart's microstructure. Further, it is the first fluid-structure interaction model of the heart that provides anatomically and physiologically detailed representations of all four cardiac valves. We demonstrate that this integrative model generates physiologic dynamics, including realistic pressure-volume loops that automatically capture isovolumetric contraction and relaxation, and predicts fine-scale flow features. None of these outputs are prescribed; instead, they emerge from interactions within our comprehensive description of cardiac physiology. Such models can serve as tools for predicting the impacts of medical devices or clinical interventions. They also can serve as platforms for mechanistic studies of cardiac pathophysiology and dysfunction, including congenital defects, cardiomyopathies, and heart failure, that are difficult or impossible to perform in patients. △ Less

Submitted 24 October, 2023; v1 submitted 5 July, 2023; originally announced July 2023.

How swimming style affects schooling of two fish-like wavy hydrofoils

Authors: Zhonglu Lin, Amneet Pal Singh Bhalla, Boyce E. Griffith, Zi Sheng, Hongquan Li, Dongfang Liang, Yu Zhang

Abstract: Fish swimming style and schooling behaviour are two important aspects of underwater locomotion. How swimming style affects fish schooling is investigated by a representative problem setup consisting of two tethered NACA0012 hydrofoils undulating in a free stream flow at various wavelengths $ λ^* = 0.8 - 8 $, front-back distance $ D = 0,\ 0.25,\ 0.5,\ 0.75 $, phase difference… ▽ More Fish swimming style and schooling behaviour are two important aspects of underwater locomotion. How swimming style affects fish schooling is investigated by a representative problem setup consisting of two tethered NACA0012 hydrofoils undulating in a free stream flow at various wavelengths $ λ^* = 0.8 - 8 $, front-back distance $ D = 0,\ 0.25,\ 0.5,\ 0.75 $, phase difference $ φ/π= 0,\ 0.5,\ 1,\ 1.5 $, and lateral gap distance $ G = 0.25,\ 0.3,\ 0.35 $ with fixed Reynolds number $ Re = 5000 $, Strouhal number $ St = 0.4 $, and maximum amplitude $ A_{max} = 0.1 $. In total, 336 cases were simulated by open-source software IBAMR based on immersed boundary method. The increase in wavelength generally leads to higher thrust and lateral force, consistent with a previous study regarding a single swimmer. The highest Froude efficiency is obtained at intermediate wavelength $ λ^* = 2 $ for either individual or two foils as a group. At side-by-side arrangement $ D = 0 $, the thrust force upon the two foils can be equivalent, indicating a stable formation. At staggered arrangement, $ D > 0 $, the follower can take significant advantage of the leader in locomotion performance by tuning phase difference. The follower's benefit decreases with relative distance. Various combinations of wavelength and relative distance can lead to distinct flow structures, indicating a tunable stealth capacity of the schooling swimmers. △ Less

Submitted 21 December, 2022; v1 submitted 4 September, 2022; originally announced September 2022.

Comments: 53 pages, 21 figures

An immersed peridynamics model of fluid-structure interaction accounting for material damage and failure

Authors: Keon Ho Kim, Amneet P. S. Bhalla, Boyce E. Griffith

Abstract: This paper develops and benchmarks an immersed peridynamics method to simulate the deformation, damage, and failure of hyperelastic materials within a fluid-structure interaction framework. The immersed peridynamics method describes an incompressible structure immersed in a viscous incompressible fluid. It expresses the momentum equation and incompressibility constraint in Eulerian form, and it de… ▽ More This paper develops and benchmarks an immersed peridynamics method to simulate the deformation, damage, and failure of hyperelastic materials within a fluid-structure interaction framework. The immersed peridynamics method describes an incompressible structure immersed in a viscous incompressible fluid. It expresses the momentum equation and incompressibility constraint in Eulerian form, and it describes the structural motion and resultant forces in Lagrangian form. Coupling between Eulerian and Lagrangian variables is achieved by integral transforms with Dirac delta function kernels, as in standard immersed boundary methods. The major difference between our approach and conventional immersed boundary methods is that we use peridynamics, instead of classical continuum mechanics, to determine the structural forces. We focus on non-ordinary state-based peridynamic material descriptions that allow us to use a constitutive correspondence framework that can leverage well characterized nonlinear constitutive models of soft materials. The convergence and accuracy of our approach are compared to both conventional and immersed finite element methods using widely used benchmark problems of nonlinear incompressible elasticity. We demonstrate that the immersed peridynamics method yields comparable accuracy with similar numbers of structural degrees of freedom for several choices of the size of the peridynamic horizon. We also demonstrate that the method can generate grid-converged simulations of fluid-driven material damage growth, crack formation and propagation, and rupture under large deformations. △ Less

Submitted 1 September, 2023; v1 submitted 28 July, 2022; originally announced July 2022.

A Model of Fluid-Structure and Biochemical Interactions for Applications to Subclinical Leaflet Thrombosis

Authors: Aaron Barrett, Jordan A. Brown, Margaret Anne Smith, Andrew Woodward, John P. Vavalle, Arash Kheradvar, Boyce E. Griffith, Aaron L. Fogelson

Abstract: Subclinical leaflet thrombosis (SLT) is a potentially serious complication of aortic valve replacement with a bioprosthetic valve in which blood clots form on the replacement valve. SLT is associated with increased risk of transient ischemic attacks and strokes and can progress to clinical leaflet thrombosis. SLT following aortic valve replacement also may be related to subsequent structural valve… ▽ More Subclinical leaflet thrombosis (SLT) is a potentially serious complication of aortic valve replacement with a bioprosthetic valve in which blood clots form on the replacement valve. SLT is associated with increased risk of transient ischemic attacks and strokes and can progress to clinical leaflet thrombosis. SLT following aortic valve replacement also may be related to subsequent structural valve deterioration, which can impair the durability of the valve replacement. Because of the difficulty in clinical imaging of SLT, models are needed to determine the mechanisms of SLT and could eventually predict which patients will develop SLT. To this end, we develop methods to simulate leaflet thrombosis that combine fluid-structure interaction and a simplified thrombosis model that allows for deposition along the moving leaflets. Additionally, this model can be adapted to model deposition or absorption along other moving boundaries. We present convergence results and quantify the model's ability to realize changes in valve opening and pressures. These new approaches are an important advancement in our tools for modeling thrombosis in which they incorporate both adhesion to the surface of the moving leaflets and feedback to the fluid-structure interaction. △ Less

Submitted 7 February, 2023; v1 submitted 3 May, 2022; originally announced May 2022.

Comments: 29 pages, 11 figures

A sharp interface Lagrangian-Eulerian method for flexible-body fluid-structure interaction

Authors: Ebrahim M. Kolahdouz, David R. Wells, Simone Rossi, Kenneth I. Aycock, Brent A. Craven, Boyce E. Griffith

Abstract: This paper introduces a sharp-interface approach to simulating fluid-structure interaction involving flexible bodies described by general nonlinear material models and across a broad range of mass density ratios. This new flexible-body immersed Lagrangian-Eulerian (ILE) approach incorporates the geometrical and domain solution flexibility of the immersed boundary (IB) method with an accuracy compa… ▽ More This paper introduces a sharp-interface approach to simulating fluid-structure interaction involving flexible bodies described by general nonlinear material models and across a broad range of mass density ratios. This new flexible-body immersed Lagrangian-Eulerian (ILE) approach incorporates the geometrical and domain solution flexibility of the immersed boundary (IB) method with an accuracy comparable to body-fitted approaches that sharply resolve flows and stresses up to the fluid-structure interface. Unlike many IB methods, our ILE formulation uses distinct momentum equations for the fluid and solid subregions with a Dirichlet-Neumann coupling strategy that connects fluid and solid subproblems through simple interface conditions. We use a penalty method involving two representations of the fluid-structure interface. These two representations are connected by approximate Lagrange multiplier forces that impose kinematic interface conditions. This approach also enables the use of multi-rate time step**, which allows us to take different time step sizes for the fluid and structure subproblems. Our fluid solver relies on an immersed interface method for discrete surfaces to impose stress jump conditions along complex interfaces. The dynamics of the volumetric structural mesh are determined using a standard finite element approach to large-deformation nonlinear elasticity via a nearly incompressible solid mechanics formulation. This formulation also readily accommodates compressible structures for cases in which part of the solid boundary does not contact the incompressible fluid. Comparisons are made with computational and experimental benchmarks. We also demonstrate the capabilities of this methodology by applying it to model the transport and capture of a cylindrical blood clot in an inferior vena cava filter. △ Less

Submitted 29 January, 2023; v1 submitted 27 April, 2022; originally announced April 2022.

A Nodal Immersed Finite Element-Finite Difference Method

Authors: David Wells, Ben Vadala-Roth, Jae H. Lee, Boyce E. Griffith

Abstract: The immersed finite element-finite difference (IFED) method is a computational approach to modeling interactions between a fluid and an immersed structure. This method uses a finite element (FE) method to approximate the stresses and forces on a structural mesh and a finite difference (FD) method to approximate the momentum of the entire fluid-structure system on a Cartesian grid. The fundamental… ▽ More The immersed finite element-finite difference (IFED) method is a computational approach to modeling interactions between a fluid and an immersed structure. This method uses a finite element (FE) method to approximate the stresses and forces on a structural mesh and a finite difference (FD) method to approximate the momentum of the entire fluid-structure system on a Cartesian grid. The fundamental approach used by this method follows the immersed boundary framework for modeling fluid-structure interaction (FSI), in which a force spreading operator prolongs structural forces to a Cartesian grid, and a velocity interpolation operator restricts a velocity field defined on that grid back onto the structural mesh. Force spreading and velocity interpolation both require projecting data onto the finite element space. Consequently, evaluating either coupling operator requires solving a matrix equation at every time step. Mass lum**, in which the projection matrices are replaced by diagonal approximations, has the potential to accelerate this method considerably. Constructing the coupling operators also requires determining the locations on the structure mesh where the forces and velocities are sampled. Here we show that sampling the forces and velocities at the nodes of the structural mesh is equivalent to using lumped mass matrices in the coupling operators. A key theoretical result of our analysis is that if both of these approaches are used together, the IFED method permits the use of lumped mass matrices derived from nodal quadrature rules for any standard interpolatory element. This is different from standard FE methods, which require specialized treatments to accommodate mass lum** with higher-order shape functions. Our theoretical results are confirmed by numerical benchmarks, including standard solid mechanics tests and examination of a dynamic model of a bioprosthetic heart valve. △ Less

Submitted 30 January, 2023; v1 submitted 18 November, 2021; originally announced November 2021.

MSC Class: 74F10; (Primary) 74S05; 76M20 (Secondary)

Journal ref: Journal of Computational Physics, Volume 477, 15 March 2023, 111890

The Projection Extension Method: A Spectrally Accurate Technique for Complex Domains

Authors: Saad Qadeer, Ehssan Nazockdast, Boyce E. Griffith

Abstract: An essential ingredient of a spectral method is the choice of suitable bases for test and trial spaces. On complex domains, these bases are harder to devise, necessitating the use of domain partitioning techniques such as the spectral element method. In this study, we introduce the Projection Extension (PE) method, an approach that yields spectrally accurate solutions to various problems on comple… ▽ More An essential ingredient of a spectral method is the choice of suitable bases for test and trial spaces. On complex domains, these bases are harder to devise, necessitating the use of domain partitioning techniques such as the spectral element method. In this study, we introduce the Projection Extension (PE) method, an approach that yields spectrally accurate solutions to various problems on complex geometries without requiring domain decomposition. This technique builds on the insights used by extension methodologies such as the immersed boundary smooth extension and Smooth Forcing Extension (SFE) methods that are designed to improve the order of accuracy of the immersed boundary method. In particular, it couples an accurate extension procedure, that functions on arbitrary domains regardless of connectedness or regularity, with a least squares minimization of the boundary conditions. The resulting procedure is stable under iterative application and straightforward to generalize to higher dimensions. Moreover, it rapidly and robustly yields exponentially convergent solutions to a number of challenging test problems, including elliptic, parabolic, Newtonian fluid flow, and viscoelastic problems. △ Less

Submitted 16 November, 2021; v1 submitted 15 November, 2021; originally announced November 2021.

Comments: 27 pages, approved for release by Pacific Northwest National Laboratory (PNNL-SA-168413)

Report number: PNNL-SA-168413 MSC Class: 65M70

On the Lagrangian-Eulerian Coupling in the Immersed Finite Element/Difference Method

Authors: Jae H. Lee, Boyce E. Griffith

Abstract: The immersed boundary (IB) method is a non-body conforming approach to fluid-structure interaction (FSI) that uses an Eulerian description of the momentum, viscosity, and incompressibility of a coupled fluid-structure system and a Lagrangian description of the deformations, stresses, and resultant forces of the immersed structure. Integral transforms with Dirac delta function kernels couple the Eu… ▽ More The immersed boundary (IB) method is a non-body conforming approach to fluid-structure interaction (FSI) that uses an Eulerian description of the momentum, viscosity, and incompressibility of a coupled fluid-structure system and a Lagrangian description of the deformations, stresses, and resultant forces of the immersed structure. Integral transforms with Dirac delta function kernels couple the Eulerian and Lagrangian variables, and in practice, discretizations of these integral transforms use regularized delta function kernels. Many different kernel functions have been proposed, but prior numerical work investigating the impact of the choice of kernel function on the accuracy of the methodology has been limited. This work systematically studies the effect of the choice of regularized delta function in several FSI benchmark tests using the immersed finite element/difference (IFED) method, which is an extension of the IB method that uses a finite element structural discretizations combined with a Cartesian grid finite difference method for the incompressible Navier-Stokes equations. The IFED formulation evaluates the regularized delta function on a collection of interaction points that can be chosen to be denser than the nodes of the Lagrangian mesh, and this study investigates the effect of varying the relative mesh widths of the Lagrangian and Eulerian discretizations. Our results indicate that kernels satisfying a commonly imposed even-odd condition require higher resolution to achieve similar accuracy as kernels that do not satisfy. We also find that narrower kernels are more robust and that structural meshes that are substantially coarser than the Cartesian grid can yield high accuracy for shear-dominated cases but not for cases with large normal forces. We verify our results in a large-scale FSI model of a bovine pericardial bioprosthetic heart valve in a pulse duplicator. △ Less

Submitted 17 February, 2022; v1 submitted 30 May, 2021; originally announced May 2021.

A one-sided direct forcing immersed boundary method using moving least squares

Authors: Rahul Bale, Amneet Pal Singh Bhalla, Boyce E. Griffith, Makoto Tsubokura

Abstract: This paper presents a one-sided immersed boundary (IB) method using kernel functions constructed via a moving least squares (MLS) method. The resulting kernels effectively couple structural degrees of freedom to fluid variables on only one side of the fluid-structure interface. This reduces spurious feedback forcing and internal flows that are typically observed in IB models that use isotropic ker… ▽ More This paper presents a one-sided immersed boundary (IB) method using kernel functions constructed via a moving least squares (MLS) method. The resulting kernels effectively couple structural degrees of freedom to fluid variables on only one side of the fluid-structure interface. This reduces spurious feedback forcing and internal flows that are typically observed in IB models that use isotropic kernel functions to couple the structure to fluid degrees of freedom on both sides of the interface. The method developed here extends the original MLS methodology introduced by Vanella and Balaras (J Comput Phys, 2009). Prior IB/MLS methods have used isotropic kernel functions that coupled fluid variables on both sides of the boundary to the interfacial degrees of freedom. The original IB/MLS approach converts the cubic spline weights typically employed in MLS reconstruction into an IB kernel function that satisfies particular discrete moment conditions. This paper shows that the same approach can be used to construct one-sided kernel functions (kernel functions are referred to as generating functions in the MLS literature). We also examine the performance of the new approach for a family of kernel functions introduced by Peskin. It is demonstrated that the one-sided MLS construction tends to generate non-monotone interpolation kernels with large over- and undershoots. We present two simple weight shifting strategies to construct generating functions that are positive and monotone, which enhances the stability of the resulting IB methodology. Benchmark cases are used to test the order of accuracy and verify the one-sided IB/MLS simulations in both two and three spatial dimensions. This new IB/MLS method is also used to simulate flow over the Ahmed car model, which highlights the applicability of this methodology for modeling complex engineering flows. △ Less

Submitted 15 April, 2021; originally announced April 2021.

Comments: In Press, Journal of Computational Physics (2021)

A Hybrid Semi-Lagrangian Cut Cell Method for Advection-Diffusion Problems with Robin Boundary Conditions in Moving Domains

Authors: Aaron Barrett, Aaron L. Fogelson, Boyce E. Griffith

Abstract: We present a new discretization for advection-diffusion problems with Robin boundary conditions on complex time-dependent domains. The method is based on second order cut cell finite volume methods introduced by Bochkov et al. to discretize the Laplace operator and Robin boundary condition. To overcome the small cell problem, we use a splitting scheme that uses a semi-Lagrangian method to treat ad… ▽ More We present a new discretization for advection-diffusion problems with Robin boundary conditions on complex time-dependent domains. The method is based on second order cut cell finite volume methods introduced by Bochkov et al. to discretize the Laplace operator and Robin boundary condition. To overcome the small cell problem, we use a splitting scheme that uses a semi-Lagrangian method to treat advection. We demonstrate second order accuracy in the $L^1$, $L^2$, and $L^\infty$ norms for both analytic test problems and numerical convergence studies. We also demonstrate the ability of the scheme to handle conversion of one concentration field to another across a moving boundary. △ Less

Submitted 25 October, 2021; v1 submitted 16 February, 2021; originally announced February 2021.

Models for plasma kinetics during simultaneous therapeutic plasma exchange and extracorporeal membrane oxygenation

Authors: Charles Puelz, Zach Danial, Jon Marinaro, Jay S. Raval, Boyce E. Griffith, Charles S. Peskin

Abstract: This paper focuses on the derivation and simulation of mathematical models describing new plasma fraction in blood for patients undergoing simultaneous extracorporeal membrane oxygenation and therapeutic plasma exchange. Models for plasma exchange with either veno-arterial or veno-venous extracorporeal membrane oxygenation are considered. Two classes of models are derived for each case, one in the… ▽ More This paper focuses on the derivation and simulation of mathematical models describing new plasma fraction in blood for patients undergoing simultaneous extracorporeal membrane oxygenation and therapeutic plasma exchange. Models for plasma exchange with either veno-arterial or veno-venous extracorporeal membrane oxygenation are considered. Two classes of models are derived for each case, one in the form of an algebraic delay equation and another in the form of a system of delay differential equations. In special cases, our models reduce to single compartment ones for plasma exchange that have been validated with experimental data. We also show that the algebraic delay equations are forward Euler discretizations of the delay differential equations, with timesteps equal to transit times through model compartments. Numerical simulations are performed to compare different model types, to investigate the impact of plasma device port switching on the efficiency of the exchange process, and to study the sensitivity of the models to their parameters. △ Less

Submitted 10 June, 2020; originally announced June 2020.

An immersed interface-lattice Boltzmann method for fluid-structure interaction

Authors: Jianhua Qin, Ebrahim M. Kolahdouz, Boyce E. Griffith

Abstract: An immersed interface-lattice Boltzmann method (II-LBM) is developed for modelling fluid-structure systems. The key element of this approach is the determination of the jump conditions that are satisfied by the distribution functions within the framework of the lattice Boltzmann method when forces are imposed along a surface immersed in an incompressible fluid. In this initial II-LBM, the disconti… ▽ More An immersed interface-lattice Boltzmann method (II-LBM) is developed for modelling fluid-structure systems. The key element of this approach is the determination of the jump conditions that are satisfied by the distribution functions within the framework of the lattice Boltzmann method when forces are imposed along a surface immersed in an incompressible fluid. In this initial II-LBM, the discontinuity related to the normal portion of the interfacial force is sharply resolved by imposing the relevant jump conditions using an approach that is analogous to imposing the corresponding pressure jump condition in the incompressible Navier-Stokes equations. We show that the jump conditions for the distribution functions are the same in both single-relaxation-time and multi-relaxation-time LBM formulations. Tangential forces are treated using the immersed boundary-lattice Boltzmann method (IB-LBM). The performance of the II-LBM method is compared to both the direct forcing IB-LBM for rigid-body fluid-structure interaction, and the classical IB-LBM for elastic interfaces. Higher order accuracy is observed with the II-LBM as compared to the IB-LBM for selected benchmark problems. Because the jump conditions of the distribution function also satisfy the continuity of the velocity field across the interface, the error in the velocity field is much smaller for the II-LBM than the IB-LBM. The II-LBM is also demonstrated to provide superior volume conservation when simulating flexible boundaries. △ Less

Submitted 26 March, 2020; originally announced March 2020.

Journal ref: Journal of Computational Physics, Volume 428, 1 March 2021, 109807

A sharp interface Lagrangian-Eulerian method for rigid-body fluid-structure interaction

Authors: Ebrahim M. Kolahdouz, Amneet P. S. Bhalla, Lawrence N. Scotten, Brent A. Craven, Boyce E. Griffith

Abstract: This paper introduces a sharp interface method to simulate fluid-structure interaction (FSI) involving rigid bodies immersed in viscous incompressible fluids. The capabilities of this methodology are demonstrated for a range of benchmark test cases along with large-scale models of biomedical FSI. The numerical approach developed herein, which we refer to as an immersed Lagrangian-Eulerian method,… ▽ More This paper introduces a sharp interface method to simulate fluid-structure interaction (FSI) involving rigid bodies immersed in viscous incompressible fluids. The capabilities of this methodology are demonstrated for a range of benchmark test cases along with large-scale models of biomedical FSI. The numerical approach developed herein, which we refer to as an immersed Lagrangian-Eulerian method, integrates aspects of partitioned and immersed FSI formulations by solving separate momentum equations for the fluid and solid subdomains, as in a partitioned formulation, while also using non-conforming discretizations of the dynamic fluid and structure regions, as in an immersed formulation. A Dirichlet-Neumann coupling scheme is used, in which the motion of the immersed solid is driven by fluid traction forces evaluated along the fluid-structure interface, and the motion of the fluid along that interface is constrained to match the solid velocity and thereby satisfy the no-slip condition. To develop a practical numerical method, we adopt a penalty approach that approximately imposes the no-slip condition along the fluid-structure interface. Our fluid-structure interaction scheme relies on an immersed interface method for discrete geometries, which enables the accurate determination of both velocities and stresses along complex fluid-structure interfaces. Unlike commonly used partitioned FSI methods, which can suffer from so-called added mass effect instabilities, our methodology retains stability for test cases involving extremely small, nearly equal, equal, and large solid-fluid density ratios without requiring subiterations or complex handling of the pressure. Biomedical FSI demonstration cases are also presented including the dynamics of a bileaflet mechanical heart valve in a pulse duplicator, and transport of blood clots in a patient-averaged anatomical model of the inferior vena cava. △ Less

Submitted 13 April, 2021; v1 submitted 26 March, 2020; originally announced March 2020.

The Smooth Forcing Extension Method: A High-Order Technique for Solving Elliptic Equations on Complex Domains

Authors: Saad Qadeer, Boyce E. Griffith

Abstract: High-order numerical methods for solving elliptic equations over arbitrary domains typically require specialized machinery, such as high-quality conforming grids for finite elements method, and quadrature rules for boundary integral methods. These tools make it difficult to apply these techniques to higher dimensions. In contrast, fixed Cartesian grid methods, such as the immersed boundary (IB) me… ▽ More High-order numerical methods for solving elliptic equations over arbitrary domains typically require specialized machinery, such as high-quality conforming grids for finite elements method, and quadrature rules for boundary integral methods. These tools make it difficult to apply these techniques to higher dimensions. In contrast, fixed Cartesian grid methods, such as the immersed boundary (IB) method, are easy to apply and generalize, but typically are low-order accurate. In this study, we introduce the Smooth Forcing Extension (SFE) method, a fixed Cartesian grid technique that builds on the insights of the IB method, and allows one to obtain arbitrary orders of accuracy. Our approach relies on a novel Fourier continuation method to compute extensions of the inhomogeneous terms to any desired regularity. This is combined with the highly accurate Non-Uniform Fast Fourier Transform for interpolation operations to yield a fast and robust method. Numerical tests confirm that the technique performs precisely as expected on one-dimensional test problems. In higher dimensions, the performance is even better, in some cases yielding sub-geometric convergence. We also demonstrate how this technique can be applied to solving parabolic problems and for computing the eigenvalues of elliptic operators on general domains, in the process illustrating its stability and amenability to generalization. △ Less

Submitted 11 May, 2021; v1 submitted 10 March, 2020; originally announced March 2020.

A sharp interface method for an immersed viscoelastic solid

Authors: Charles Puelz, Boyce E. Griffith

Abstract: The immersed boundary-finite element method (IBFE) is an approach to describing the dynamics of an elastic structure immersed in an incompressible viscous fluid. In this formulation, there are discontinuities in the pressure and viscous stress at fluid-structure interfaces. The standard immersed boundary approach, which connects the Lagrangian and Eulerian variables via integral transforms with re… ▽ More The immersed boundary-finite element method (IBFE) is an approach to describing the dynamics of an elastic structure immersed in an incompressible viscous fluid. In this formulation, there are discontinuities in the pressure and viscous stress at fluid-structure interfaces. The standard immersed boundary approach, which connects the Lagrangian and Eulerian variables via integral transforms with regularized Dirac delta function kernels, smooths out these discontinuities, which generally leads to low order accuracy. This paper describes an approach to accurately resolve pressure discontinuities for these types of formulations, in which the solid may undergo large deformations. Our strategy is to decompose the physical pressure field into a sum of two pressure-like fields, one defined on the entire computational domain, which includes both the fluid and solid subregions, and one defined only on the solid subregion. Each of these fields is continuous on its domain of definition, which enables high accuracy via standard discretization methods without sacrificing sharp resolution of the pressure discontinuity. Numerical tests demonstrate that this method improves rates of convergence for displacements, velocities, stresses, and pressures, as compared to the conventional IBFE method. Further, it produces much smaller errors at reasonable numbers of degrees of freedom. The performance of this method is tested on several cases with analytic solutions, a nontrivial benchmark problem of incompressible solid mechanics, and an example involving a thick, actively contracting torus. △ Less

Submitted 5 September, 2019; v1 submitted 6 February, 2019; originally announced February 2019.

An Immersed Interface Method for Discrete Surfaces

Authors: Ebrahim M. Kolahdouz, Amneet Pal Singh Bhalla, Brent A. Craven, Boyce E. Griffith

Abstract: Fluid-structure systems occur in a range of scientific and engineering applications. The immersed boundary(IB) method is a widely recognized and effective modeling paradigm for simulating fluid-structure interaction(FSI) in such systems, but a difficulty of the IB formulation is that the pressure and viscous stress are generally discontinuous at the interface. The conventional IB method regularize… ▽ More Fluid-structure systems occur in a range of scientific and engineering applications. The immersed boundary(IB) method is a widely recognized and effective modeling paradigm for simulating fluid-structure interaction(FSI) in such systems, but a difficulty of the IB formulation is that the pressure and viscous stress are generally discontinuous at the interface. The conventional IB method regularizes these discontinuities, which typically yields low-order accuracy at these interfaces. The immersed interface method(IIM) is an IB-like approach to FSI that sharply imposes stress jump conditions, enabling higher-order accuracy, but prior applications of the IIM have been largely restricted to methods that rely on smooth representations of the interface geometry. This paper introduces an IIM that uses only a C0 representation of the interface,such as those provided by standard nodal Lagrangian FE methods. Verification examples for models with prescribed motion demonstrate that the method sharply resolves stress discontinuities along the IB while avoiding the need for analytic information of the interface geometry. We demonstrate that only the lowest-order jump conditions for the pressure and velocity gradient are required to realize global 2nd-order accuracy. Specifically,we show 2nd-order global convergence rate along with nearly 2nd-order local convergence in the Eulerian velocity, and between 1st-and 2nd-order global convergence rates along with 1st-order local convergence for the Eulerian pressure. We also show 2nd-order local convergence in the interfacial displacement and velocity along with 1st-order local convergence in the fluid traction. As a demonstration of the method's ability to tackle complex geometries,this approach is also used to simulate flow in an anatomical model of the inferior vena cava. △ Less

Submitted 9 June, 2022; v1 submitted 17 December, 2018; originally announced December 2018.

Comments: - Added a non-axisymmetric example (flow within eccentric rotating cylinder in Sec. 4.3) - Added a more in-depth analysis and comparison with a body-fitted approach for the application in Sec. 4.7

Stabilization approaches for the hyperelastic immersed boundary method for problems of large-deformation incompressible elasticity

Authors: Ben Vadala-Roth, Shashank Acharya, Neelesh A Patankar, Simone Rossi, Boyce E Griffith

Abstract: The immersed boundary method is a mathematical framework for modeling fluid-structure interaction. This formulation describes the momentum, viscosity, and incompressibility of the fluid-structure system in Eulerian form, and it uses Lagrangian coordinates to describe the structural deformations, stresses, and resultant forces. Integral transforms with Dirac delta function kernels connect the Euler… ▽ More The immersed boundary method is a mathematical framework for modeling fluid-structure interaction. This formulation describes the momentum, viscosity, and incompressibility of the fluid-structure system in Eulerian form, and it uses Lagrangian coordinates to describe the structural deformations, stresses, and resultant forces. Integral transforms with Dirac delta function kernels connect the Eulerian and Lagrangian frames. The fluid and the structure are both typically treated as incompressible materials. Upon discretization, however, the incompressibility of the structure is only maintained approximately. To obtain an immersed method for incompressible hyperelastic structures that is robust under large structural deformations, we introduce a volumetric energy in the solid region that stabilizes the formulation and improves the accuracy of the numerical scheme. This formulation augments the discrete Lagrange multiplier for the incompressibility constraint, thereby improving the original method's accuracy. This volumetric energy is incorporated by decomposing the strain energy into isochoric and dilatational components, as in standard solid mechanics formulations of nearly incompressible elasticity. We study the performance of the stabilized method using several quasi-static solid mechanics benchmarks, a dynamic fluid-structure interaction benchmark, and a detailed three-dimensional model of esophageal transport. The accuracy achieved by the stabilized immersed formulation is comparable to that of a stabilized finite element method for incompressible elasticity using similar numbers of structural degrees of freedom. △ Less

Submitted 25 February, 2020; v1 submitted 15 November, 2018; originally announced November 2018.

Comments: Extensive revisions

A robust incompressible Navier-Stokes solver for high density ratio multiphase flows

Authors: Nishant Nangia, Boyce E. Griffith, Neelesh A. Patankar, Amneet Pal Singh Bhalla

Abstract: This paper presents a robust, adaptive numerical scheme for simulating high density ratio and high shear multiphase flows on locally refined Cartesian grids that adapt to the evolving interfaces and track regions of high vorticity. The algorithm combines the interface capturing level set method with a variable-coefficient incompressible Navier-Stokes solver that is demonstrated to stably resolve m… ▽ More This paper presents a robust, adaptive numerical scheme for simulating high density ratio and high shear multiphase flows on locally refined Cartesian grids that adapt to the evolving interfaces and track regions of high vorticity. The algorithm combines the interface capturing level set method with a variable-coefficient incompressible Navier-Stokes solver that is demonstrated to stably resolve material contrast ratios of up to six orders of magnitude. The discretization approach ensures second-order pointwise accuracy for both velocity and pressure with several physical boundary treatments, including velocity and traction boundary conditions. The paper includes several test cases that demonstrate the order of accuracy and algorithmic scalability of the flow solver. To ensure the stability of the numerical scheme in the presence of high density and viscosity ratios, we employ a consistent treatment of mass and momentum transport in the conservative form of discrete equations. This consistency is achieved by solving an additional mass balance equation, which we approximate via a strong stability preserving Runga-Kutta time integrator and by employing the same mass flux (obtained from the mass equation) in the discrete momentum equation. The scheme uses higher-order total variation diminishing (TVD) and convection-boundedness criterion (CBC) satisfying limiter to avoid numerical fluctuations in the transported density field. The high-order bounded convective transport is done on a dimension-by-dimension basis, which makes the scheme simple to implement. We also demonstrate through several test cases that the lack of consistent mass and momentum transport in non-conservative formulations, which are commonly used in practice, or the use of non-CBC satisfying limiters can yield very large numerical error and very poor accuracy for convection-dominant high density ratio flows. △ Less

Submitted 1 September, 2019; v1 submitted 31 August, 2018; originally announced September 2018.

Comments: Figures are compressed to comply with arXiv size requirements

Transition in swimming direction in a model self-propelled inertial swimmer

Authors: Thomas Dombrowski, Shannon K. Jones, Georgios Katsikis, Amneet Pal Singh Bhalla, Boyce E. Griffith, Daphne Klotsa

Abstract: We propose a reciprocal, self-propelled model swimmer at intermediate Reynolds numbers ($Re$). Our swimmer consists of two unequal spheres that oscillate in antiphase generating nonlinear steady streaming (SS) flows. We show computationally that the SS flows enable the swimmer to propel itself, and also switch direction as $Re$ increases. We quantify the transition in the swimming direction by col… ▽ More We propose a reciprocal, self-propelled model swimmer at intermediate Reynolds numbers ($Re$). Our swimmer consists of two unequal spheres that oscillate in antiphase generating nonlinear steady streaming (SS) flows. We show computationally that the SS flows enable the swimmer to propel itself, and also switch direction as $Re$ increases. We quantify the transition in the swimming direction by collapsing our data on a critical $Re$ and show that the transition in swimming directions corresponds to the reversal of the SS flows. Based on our findings, we propose that SS can be an important physical mechanism for motility at intermediate $Re$. △ Less

Submitted 7 November, 2018; v1 submitted 11 January, 2018; originally announced January 2018.

Comments: 6 pages, 3 figures

Journal ref: Phys. Rev. Fluids 4, 021101 (2019)

Incorporating Inductances in Tissue-Scale Models of Cardiac Electrophysiology

Authors: Simone Rossi, Boyce E. Griffith

Abstract: In standard models of cardiac electrophysiology, including the bidomain and monodomain models, local perturbations can propagate at infinite speed. We address this unrealistic property by develo** a hyperbolic bidomain model that is based on a generalization of Ohm's law with a Cattaneo-type model for the fluxes. Further, we obtain a hyperbolic monodomain model in the case that the intracellular… ▽ More In standard models of cardiac electrophysiology, including the bidomain and monodomain models, local perturbations can propagate at infinite speed. We address this unrealistic property by develo** a hyperbolic bidomain model that is based on a generalization of Ohm's law with a Cattaneo-type model for the fluxes. Further, we obtain a hyperbolic monodomain model in the case that the intracellular and extracellular conductivity tensors have the same anisotropy ratio. In one spatial dimension, the hyperbolic monodomain model is equivalent to a cable model that includes axial inductances, and the relaxation times of the Cattaneo fluxes are strictly related to these inductances. A purely linear analysis shows that the inductances are negligible, but models of cardiac electrophysiology are highly nonlinear, and linear predictions may not capture the fully nonlinear dynamics. In fact, contrary to the linear analysis, we show that for simple nonlinear ionic models, an increase in conduction velocity is obtained for small and moderate values of the relaxation time. A similar behavior is also demonstrated with biophysically detailed ionic models. Using the Fenton-Karma model along with a low-order finite element spatial discretization, we numerically analyze differences between the standard monodomain model and the hyperbolic monodomain model. In a simple benchmark test, we show that the propagation of the action potential is strongly influenced by the alignment of the fibers with respect to the mesh in both the parabolic and hyperbolic models when using relatively coarse spatial discretizations. Accurate predictions of the conduction velocity require computational mesh spacings on the order of a single cardiac cell. We also compare the two formulations in the case of spiral break up and atrial fibrillation in an anatomically detailed model of the left atrium, and [...]. △ Less

Submitted 16 August, 2017; v1 submitted 26 June, 2017; originally announced June 2017.

Comments: 20 pages, 12 figures

Image-based immersed boundary model of the aortic root

Authors: Ali Hasan, Ebrahim M. Kolahdouz, Andinet Enquobahrie, Thomas G. Caranasos, John P. Vavalle, Boyce E. Griffith

Abstract: Each year, approximately 300,000 heart valve repair or replacement procedures are performed worldwide, including approximately 70,000 aortic valve replacement surgeries in the United States alone. This paper describes progress in constructing anatomically and physiologically realistic immersed boundary (IB) models of the dynamics of the aortic root and ascending aorta. This work builds on earlier… ▽ More Each year, approximately 300,000 heart valve repair or replacement procedures are performed worldwide, including approximately 70,000 aortic valve replacement surgeries in the United States alone. This paper describes progress in constructing anatomically and physiologically realistic immersed boundary (IB) models of the dynamics of the aortic root and ascending aorta. This work builds on earlier IB models of fluid-structure interaction (FSI) in the aortic root, which previously achieved realistic hemodynamics over multiple cardiac cycles, but which also were limited to simplified aortic geometries and idealized descriptions of the biomechanics of the aortic valve cusps. By contrast, the model described herein uses an anatomical geometry reconstructed from patient-specific computed tomography angiography (CTA) data, and employs a description of the elasticity of the aortic valve leaflets based on a fiber-reinforced constitutive model fit to experimental tensile test data. Numerical tests show that the model is able to resolve the leaflet biomechanics in diastole and early systole at practical grid spacings. The model is also used to examine differences in the mechanics and fluid dynamics yielded by fresh valve leaflets and glutaraldehyde-fixed leaflets similar to those used in bioprosthetic heart valves. Although there are large differences in the leaflet deformations during diastole, the differences in the open configurations of the valve models are relatively small, and nearly identical hemodynamics are obtained in all cases considered. △ Less

Submitted 4 May, 2017; originally announced May 2017.

Immersed boundary model of aortic heart valve dynamics with physiological driving and loading conditions

Authors: Boyce E. Griffith

Abstract: The immersed boundary (IB) method is a mathematical and numerical framework for problems of fluid-structure interaction, treating the particular case in which an elastic structure is immersed in a viscous incompressible fluid. The IB approach to such problems is to describe the elasticity of the immersed structure in Lagrangian form, and to describe the momentum, viscosity, and incompressibility o… ▽ More The immersed boundary (IB) method is a mathematical and numerical framework for problems of fluid-structure interaction, treating the particular case in which an elastic structure is immersed in a viscous incompressible fluid. The IB approach to such problems is to describe the elasticity of the immersed structure in Lagrangian form, and to describe the momentum, viscosity, and incompressibility of the coupled fluid-structure system in Eulerian form. Interaction between Lagrangian and Eulerian variables is mediated by integral equations with Dirac delta function kernels. The IB method provides a unified formulation for fluid-structure interaction models involving both thin elastic boundaries and also thick viscoelastic bodies. In this work, we describe the application of an adaptive, staggered-grid version of the IB method to the three-dimensional simulation of the fluid dynamics of the aortic heart valve. Our model describes the thin leaflets of the aortic valve as immersed elastic boundaries, and describes the wall of the aortic root as a thick, semi-rigid elastic structure. A physiological left-ventricular pressure waveform is used to drive flow through the model valve, and dynamic pressure loading conditions are provided by a reduced (zero-dimensional) circulation model that has been fit to clinical data. We use this model and method to simulate aortic valve dynamics over multiple cardiac cycles. The model is shown to approach rapidly a periodic steady state in which physiological cardiac output is obtained at physiological pressures. These realistic flow rates are not specified in the model, however. Instead, they emerge from the fluid-structure interaction simulation. △ Less

Submitted 27 March, 2017; originally announced March 2017.

Journal ref: Int J Numer Meth Biomed Eng, 28(3):317-345, 2012

An Immersed Boundary Method with Divergence-Free Velocity Interpolation and Force Spreading

Authors: Yuanxun Bao, Aleksandar Donev, Boyce E. Griffith, David M. McQueen, Charles S. Peskin

Abstract: The Immersed Boundary (IB) method is a mathematical framework for constructing robust numerical methods to study fluid-structure interaction in problems involving an elastic structure immersed in a viscous fluid. The IB formulation uses an Eulerian representation of the fluid and a Lagrangian representation of the structure. The Lagrangian and Eulerian frames are coupled by integral transforms wit… ▽ More The Immersed Boundary (IB) method is a mathematical framework for constructing robust numerical methods to study fluid-structure interaction in problems involving an elastic structure immersed in a viscous fluid. The IB formulation uses an Eulerian representation of the fluid and a Lagrangian representation of the structure. The Lagrangian and Eulerian frames are coupled by integral transforms with delta function kernels. The discretized IB equations use approximations to these transforms with regularized delta function kernels to interpolate the fluid velocity to the structure, and to spread structural forces to the fluid. It is well-known that the conventional IB method can suffer from poor volume conservation since the interpolated Lagrangian velocity field is not generally divergence-free, and so this can cause spurious volume changes. In practice, the lack of volume conservation is especially pronounced for cases where there are large pressure differences across thin structural boundaries. The aim of this paper is to greatly reduce the volume error of the IB method by introducing velocity-interpolation and force-spreading schemes with the properties that the interpolated velocity field in which the structure moves is at least C1 and satisfies a continuous divergence-free condition, and that the force-spreading operator is the adjoint of the velocity-interpolation operator. We confirm through numerical experiments in two and three spatial dimensions that this new IB method is able to achieve substantial improvement in volume conservation compared to other existing IB methods, at the expense of a modest increase in the computational cost. Further, the new method provides smoother Lagrangian forces (tractions) than traditional IB methods. The method presented here is restricted to periodic computational domains. Its generalization to non-periodic domains is important future work. △ Less

Submitted 15 June, 2017; v1 submitted 25 January, 2017; originally announced January 2017.

Comments: 49 pages, 13 figures

Hybrid finite difference/finite element immersed boundary method

Authors: Boyce E. Griffith, Xiaoyu Luo

Abstract: The immersed boundary method is an approach to fluid-structure interaction that uses a Lagrangian description of the structural deformations, stresses, and forces along with an Eulerian description of the momentum, viscosity, and incompressibility of the fluid-structure system. The original immersed boundary methods described immersed elastic structures using systems of flexible fibers, and even n… ▽ More The immersed boundary method is an approach to fluid-structure interaction that uses a Lagrangian description of the structural deformations, stresses, and forces along with an Eulerian description of the momentum, viscosity, and incompressibility of the fluid-structure system. The original immersed boundary methods described immersed elastic structures using systems of flexible fibers, and even now, most immersed boundary methods still require Lagrangian meshes that are finer than the Eulerian grid. This work introduces a coupling scheme for the immersed boundary method to link the Lagrangian and Eulerian variables that facilitates independent spatial discretizations for the structure and background grid. This approach employs a finite element discretization of the structure while retaining a finite difference scheme for the Eulerian variables. We apply this method to benchmark problems involving elastic, rigid, and actively contracting structures, including an idealized model of the left ventricle of the heart. Our tests include cases in which, for a fixed Eulerian grid spacing, coarser Lagrangian structural meshes yield discretization errors that are as much as several orders of magnitude smaller than errors obtained using finer structural meshes. The Lagrangian-Eulerian coupling approach developed in this work enables the effective use of these coarse structural meshes with the immersed boundary method. This work also contrasts two different weak forms of the equations, one of which is demonstrated to be more effective for the coarse structural discretizations facilitated by our coupling approach. △ Less

Submitted 23 February, 2017; v1 submitted 18 December, 2016; originally announced December 2016.

Scalable smoothing strategies for a geometric multigrid method for the immersed boundary equations

Authors: Amneet Pal Singh Bhalla, Matthew G. Knepley, Mark F. Adams, Robert D. Guy, Boyce E. Griffith

Abstract: The immersed boundary (IB) method is a widely used approach to simulating fluid-structure interaction (FSI). Although explicit versions of the IB method can suffer from severe time step size restrictions, these methods remain popular because of their simplicity and generality. In prior work (Guy et al., Adv Comput Math, 2015), some of us developed a geometric multigrid preconditioner for a stable… ▽ More The immersed boundary (IB) method is a widely used approach to simulating fluid-structure interaction (FSI). Although explicit versions of the IB method can suffer from severe time step size restrictions, these methods remain popular because of their simplicity and generality. In prior work (Guy et al., Adv Comput Math, 2015), some of us developed a geometric multigrid preconditioner for a stable semi-implicit IB method under Stokes flow conditions; however, this solver methodology used a Vanka-type smoother that presented limited opportunities for parallelization. This work extends this Stokes-IB solver methodology by develo** smoothing techniques that are suitable for parallel implementation. Specifically, we demonstrate that an additive version of the Vanka smoother can yield an effective multigrid preconditioner for the Stokes-IB equations, and we introduce an efficient Schur complement-based smoother that is also shown to be effective for the Stokes-IB equations. We investigate the performance of these solvers for a broad range of material stiffnesses, both for Stokes flows and flows at nonzero Reynolds numbers, and for thick and thin structural models. We show here that linear solver performance degrades with increasing Reynolds number and material stiffness, especially for thin interface cases. Nonetheless, the proposed approaches promise to yield effective solution algorithms, especially at lower Reynolds numbers and at modest-to-high elastic stiffnesses. △ Less

Submitted 7 December, 2016; originally announced December 2016.

A continuum mechanics-based musculo-mechanical model for esophageal transport

Authors: Wenjun Kou, Boyce E. Griffith, John E. Pandolfino, Peter J. Kahrilas, Neelesh A. Patankar

Abstract: In this work, we extend our previous esophageal transport model using an immersed boundary (IB) method with discrete fiber-based structures, to one using a continuum mechanics-based model that is approximated based on finite elements (IB-FE). To deal with the leakage of flow when the Lagrangian mesh becomes coarser than the fluid mesh, we employ adaptive interaction quadrature points for Lagrangia… ▽ More In this work, we extend our previous esophageal transport model using an immersed boundary (IB) method with discrete fiber-based structures, to one using a continuum mechanics-based model that is approximated based on finite elements (IB-FE). To deal with the leakage of flow when the Lagrangian mesh becomes coarser than the fluid mesh, we employ adaptive interaction quadrature points for Lagrangian-Eulerian interaction equations based on a previous work. In particular, we introduce a new anisotropic adaptive interaction quadrature rule. The new rule permits us to vary the interaction quadrature points not only at each time-step and element but also at different orientations per element. For the material model, we extend our previous fiber-based model to a continuum-based model. We first study a case in which a three-dimensional short tube is dilated. Results match very well with those from the implicit FE method. We remark that in our IB-FE case, the three-dimensional tube undergoes a very large deformation and the Lagrangian mesh-size becomes about 6 times of Eulerian mesh-size. To validate the method in handling fiber-matrix material models, we perform a second study on dilating a long fiber-reinforced tube. Errors are small when we compare numerical solutions with analytical solutions. The technique is then applied to the problem of esophageal transport. We present three cases that differ in the material model and muscle fiber architecture. The overall transport features are consistent with those from the previous model. We remark that the continuum-based model can handle more realistic and complicated material behavior. This is demonstrated in our third case with spatially varying fiber architecture. We find this unique muscle fiber architecture could generate a so-called pressure transition zone. This suggests an important role of muscle fiber architecture in esophageal transport. △ Less

Submitted 13 September, 2016; originally announced September 2016.

Comments: 47 pages, 17 figures

Hydrodynamics of Suspensions of Passive and Active Rigid Particles: A Rigid Multiblob Approach

Authors: F. Balboa Usabiaga, B. Kallemov, B. Delmotte, A. Pal Singh Bhalla, B. E. Griffith, A. Donev

Abstract: We develop a rigid multiblob method for numerically solving the mobility problem for suspensions of passive and active rigid particles of complex shape in Stokes flow in unconfined, partially confined, and fully confined geometries. As in a number of existing methods, we discretize rigid bodies using a collection of minimally-resolved spherical blobs constrained to move as a rigid body, to arrive… ▽ More We develop a rigid multiblob method for numerically solving the mobility problem for suspensions of passive and active rigid particles of complex shape in Stokes flow in unconfined, partially confined, and fully confined geometries. As in a number of existing methods, we discretize rigid bodies using a collection of minimally-resolved spherical blobs constrained to move as a rigid body, to arrive at a potentially large linear system of equations for the unknown Lagrange multipliers and rigid-body motions. Here we develop a block-diagonal preconditioner for this linear system and show that a standard Krylov solver converges in a modest number of iterations that is essentially independent of the number of particles. For unbounded suspensions and suspensions sedimented against a single no-slip boundary, we rely on existing analytical expressions for the Rotne-Prager tensor combined with a fast multipole method or a direct summation on a Graphical Processing Unit to obtain an simple yet efficient and scalable implementation. For fully confined domains, such as periodic suspensions or suspensions confined in slit and square channels, we extend a recently-developed rigid-body immersed boundary method to suspensions of freely-moving passive or active rigid particles at zero Reynolds number. We demonstrate that the iterative solver for the coupled fluid and rigid body equations converges in a bounded number of iterations regardless of the system size. We optimize a number of parameters in the iterative solvers and apply our method to a variety of benchmark problems to carefully assess the accuracy of the rigid multiblob approach as a function of the resolution. We also model the dynamics of colloidal particles studied in recent experiments, such as passive boomerangs in a slit channel, as well as a pair of non-Brownian active nanorods sedimented against a wall. △ Less

Submitted 20 November, 2016; v1 submitted 5 February, 2016; originally announced February 2016.

Comments: Under revision in CAMCOS, Nov 2016

Journal ref: Commun. Appl. Math. Comput. Sci. 11 (2016) 217-296

An Immersed Boundary Method for Rigid Bodies

Authors: B. Kallemov, A. Pal Singh Bhalla, B. E. Griffith, A. Donev

Abstract: We develop an immersed boundary (IB) method for modeling flows around fixed or moving rigid bodies that is suitable for a broad range of Reynolds numbers, including steady Stokes flow. The spatio-temporal discretization of the fluid equations is based on a standard staggered-grid approach. Fluid-body interaction is handled using Peskin's IB method; however, unlike existing IB approaches to such pr… ▽ More We develop an immersed boundary (IB) method for modeling flows around fixed or moving rigid bodies that is suitable for a broad range of Reynolds numbers, including steady Stokes flow. The spatio-temporal discretization of the fluid equations is based on a standard staggered-grid approach. Fluid-body interaction is handled using Peskin's IB method; however, unlike existing IB approaches to such problems, we do not rely on penalty or fractional-step formulations. Instead, we use an unsplit scheme that ensures the no-slip constraint is enforced exactly in terms of the Lagrangian velocity field evaluated at the IB markers. Fractional-step approaches, by contrast, can impose such constraints only approximately. Imposing these constraints exactly requires the solution of a large linear system that includes the fluid velocity and pressure as well as Lagrange multiplier forces that impose the motion of the body. To solve this system efficiently, we develop a preconditioner for the constrained IB formulation that is based on an analytical approximation to the Schur complement. This approach is enabled by the near translational and rotational invariance of Peskin's IB method. We demonstrate that only a few cycles of a geometric multigrid method for the fluid equations are required in each application of the preconditioner, and we demonstrate robust convergence of the overall Krylov solver despite the approximations made in the preconditioner. We apply the method to a number of test problems at zero and finite Reynolds numbers, and we demonstrate first-order convergence of the method to several analytical solutions and benchmark computations. △ Less

Submitted 23 November, 2015; v1 submitted 28 May, 2015; originally announced May 2015.

Comments: Submitted to CAMCOS

Journal ref: Commun. Appl. Math. Comput. Sci. 11 (2016) 79-141

Immersed boundary-finite element model of fluid-structure interaction in the aortic root

Authors: Vittoria Flamini, Abe DeAnda, Boyce E. Griffith

Abstract: It has long been recognized that aortic root elasticity helps to ensure efficient aortic valve closure, but our understanding of the functional importance of the elasticity and geometry of the aortic root continues to evolve as increasingly detailed in vivo imaging data become available. Herein, we describe fluid-structure interaction models of the aortic root, including the aortic valve leaflets,… ▽ More It has long been recognized that aortic root elasticity helps to ensure efficient aortic valve closure, but our understanding of the functional importance of the elasticity and geometry of the aortic root continues to evolve as increasingly detailed in vivo imaging data become available. Herein, we describe fluid-structure interaction models of the aortic root, including the aortic valve leaflets, the sinuses of Valsalva, the aortic annulus, and the sinotubular junction, that employ a version of Peskin's immersed boundary (IB) method with a finite element (FE) description of the structural elasticity. We develop both an idealized model of the root with three-fold symmetry of the aortic sinuses and valve leaflets, and a more realistic model that accounts for the differences in the sizes of the left, right, and noncoronary sinuses and corresponding valve cusps. As in earlier work, we use fiber-based models of the valve leaflets, but this study extends earlier IB models of the aortic root by employing incompressible hyperelastic models of the mechanics of the sinuses and ascending aorta using a constitutive law fit to experimental data from human aortic root tissue. In vivo pressure loading is accounted for by a backwards displacement method that determines the unloaded configurations of the root models. Our models yield realistic cardiac output at physiological pressures, with low transvalvular pressure differences during forward flow, minimal regurgitation during valve closure, and realistic pressure loads when the valve is closed during diastole. Further, results from high-resolution computations demonstrate that IB models of the aortic valve are able to produce essentially grid-converged dynamics at practical grid spacings for the high-Reynolds number flows of the aortic root. △ Less

Submitted 9 January, 2015; originally announced January 2015.

A fully resolved active musculo-mechanical model for esophageal transport

Authors: Wenjun Kou, Amneet Pal Singh Bhalla, Boyce E. Griffith, John E. Pandolfino, Peter J. Kahrilas, Neelesh A. Patankar

Abstract: Esophageal transport is a physiological process that mechanically transports an ingested food bolus from the pharynx to the stomach via the esophagus, a multi-layered muscular tube. This process involves interactions between the bolus, the esophagus, and the neurally coordinated activation of the esophageal muscles. In this work, we use an immersed boundary (IB) approach to simulate peristaltic tr… ▽ More Esophageal transport is a physiological process that mechanically transports an ingested food bolus from the pharynx to the stomach via the esophagus, a multi-layered muscular tube. This process involves interactions between the bolus, the esophagus, and the neurally coordinated activation of the esophageal muscles. In this work, we use an immersed boundary (IB) approach to simulate peristaltic transport in the esophagus. The bolus is treated as a viscous fluid that is actively transported by the muscular esophagus, which is modeled as an actively contracting, fiber-reinforced tube. A simplified version of our model is verified by comparison to an analytic solution to the tube dilation problem. Three different complex models of the multi-layered esophagus, which differ in their activation patterns and the layouts of the mucosal layers, are then extensively tested. To our knowledge, these simulations are the first of their kind to incorporate the bolus, the multi-layered esophagus tube, and muscle activation into an integrated model. Consistent with experimental observations, our simulations capture the pressure peak generated by the muscle activation pulse that travels along the bolus tail. These fully resolved simulations provide new insights into roles of the mucosal layers during bolus transport. In addition, the information on pressure and the kinematics of the esophageal wall due to the coordination of muscle activation is provided, which may help relate clinical data from manometry and ultrasound images to the underlying esophageal motor function. △ Less

Submitted 8 January, 2015; originally announced January 2015.

Journal ref: Journal of Computational Physics, Volume 298, 1 October 2015, Pages 446-465

Multiscale temporal integrators for fluctuating hydrodynamics

Authors: S. Delong, Y. Sun, B. E. Griffith, E. Vanden-Eijnden, A. Donev

Abstract: Following on our previous work [S. Delong and B. E. Griffith and E. Vanden-Eijnden and A. Donev, Phys. Rev. E, 87(3):033302, 2013], we develop temporal integrators for solving Langevin stochastic differential equations that arise in fluctuating hydrodynamics. Our simple predictor-corrector schemes add fluctuations to standard second-order deterministic solvers in a way that maintains second-order… ▽ More Following on our previous work [S. Delong and B. E. Griffith and E. Vanden-Eijnden and A. Donev, Phys. Rev. E, 87(3):033302, 2013], we develop temporal integrators for solving Langevin stochastic differential equations that arise in fluctuating hydrodynamics. Our simple predictor-corrector schemes add fluctuations to standard second-order deterministic solvers in a way that maintains second-order weak accuracy for linearized fluctuating hydrodynamics. We construct a general class of schemes and recommend two specific schemes: an explicit midpoint method, and an implicit trapezoidal method. We also construct predictor-corrector methods for integrating the overdamped limit of systems of equations with a fast and slow variable in the limit of infinite separation of the fast and slow timescales. We propose using random finite differences to approximate some of the stochastic drift terms that arise because of the kinetic multiplicative noise in the limiting dynamics. We illustrate our integrators on two applications involving the development of giant nonequilibrium concentration fluctuations in diffusively-mixing fluids. We first study the development of giant fluctuations in recent experiments performed in microgravity using an overdamped integrator. We then include the effects of gravity, and find that we also need to include the effects of fluid inertia, which affects the dynamics of the concentration fluctuations greatly at small wavenumbers. △ Less

Submitted 7 January, 2015; v1 submitted 1 October, 2014; originally announced October 2014.

Comments: Published with some errors (fixed here) as Phys. Rev. E, 90, 063312, 2014

Brownian Dynamics without Green's Functions

Authors: S. Delong, F. Balboa Usabiaga, R. Delgado-Buscalioni, B. E. Griffith, A. Donev

Abstract: We develop a Fluctuating Immersed Boundary (FIB) method for performing Brownian dynamics simulations of confined particle suspensions. Unlike traditional methods which employ analytical Green's functions for Stokes flow in the confined geometry, the FIB method uses a fluctuating finite-volume Stokes solver to generate the action of the response functions "on the fly". Importantly, we demonstrate t… ▽ More We develop a Fluctuating Immersed Boundary (FIB) method for performing Brownian dynamics simulations of confined particle suspensions. Unlike traditional methods which employ analytical Green's functions for Stokes flow in the confined geometry, the FIB method uses a fluctuating finite-volume Stokes solver to generate the action of the response functions "on the fly". Importantly, we demonstrate that both the deterministic terms necessary to capture the hydrodynamic interactions among the suspended particles, as well as the stochastic terms necessary to generate the hydrodynamically-correlated Brownian motion, can be generated by solving the steady Stokes equations numerically only once per time step. This is accomplished by including a stochastic contribution to the stress tensor in the fluid equations consistent with fluctuating hydrodynamics. We develop novel temporal integrators that account for the multiplicative nature of the noise in the equations of Brownian dynamics and the strong dependence of the mobility on the configuration for confined systems. Notably, we propose a random finite difference approach to approximating the stochastic drift proportional to the divergence of the configuration-dependent mobility matrix. Through comparisons with analytical and existing computational results, we numerically demonstrate the ability of the FIB method to accurately capture both the static (equilibrium) and dynamic properties of interacting particles in flow. △ Less

Submitted 26 June, 2015; v1 submitted 16 January, 2014; originally announced January 2014.

Comments: For software see https://github.com/stochasticHydroTools/MixingIBAMR This version is updated relative to journal version with some fixes and an updated Figs. 1 and 4 and Table 1 to show latest boundary condition capabilities of the IBAMR code

Journal ref: J. Chem. Phys., 140, 134110, 2014

Geometric multigrid for an implicit-time immersed boundary method

Authors: Robert D. Guy, Bobby Philip, Boyce E. Griffith

Abstract: The immersed boundary (IB) method is an approach to fluid-structure interaction that uses Lagrangian variables to describe the structure and Eulerian variables to describe the fluid. Explicit time step** schemes for the IB method require solvers only for Eulerian equations, for which fast Cartesian grid solution methods are available. Such methods are relatively straightforward to develop and ar… ▽ More The immersed boundary (IB) method is an approach to fluid-structure interaction that uses Lagrangian variables to describe the structure and Eulerian variables to describe the fluid. Explicit time step** schemes for the IB method require solvers only for Eulerian equations, for which fast Cartesian grid solution methods are available. Such methods are relatively straightforward to develop and are widely used in practice but often require very small time steps to maintain stability. Implicit-time IB methods permit the stable use of large time steps, but efficient implementations of such methods require significantly more complex solvers that effectively treat both Lagrangian and Eulerian variables simultaneously. Several different approaches to solving the coupled Lagrangian-Eulerian equations have been proposed, but a complete understanding of this problem is still emerging. This paper presents a geometric multigrid method for an implicit-time discretization of the IB equations. This multigrid scheme uses a generalization of box relaxation that is shown to handle problems in which the physical stiffness of the structure is very large. Numerical examples are provided to illustrate the effectiveness and efficiency of the algorithms described herein. These tests show that using multigrid as a preconditioner for a Krylov method yields improvements in both robustness and efficiency as compared to using multigrid as a solver. They also demonstrate that with a time step 100--1000 times larger than that permitted by an explicit IB method, the multigrid-preconditioned implicit IB method is approximately 50--200 times more efficient than the explicit method. △ Less

Submitted 5 April, 2017; v1 submitted 21 November, 2013; originally announced November 2013.

MSC Class: 65F08; 65M55; 76M20

Journal ref: Adv Comput Math (2015) 41: 635

Efficient Variable-Coefficient Finite-Volume Stokes Solvers

Authors: M. Cai, A. J. Nonaka, J. B. Bell, B. E. Griffith, A. Donev

Abstract: We investigate several robust preconditioners for solving the saddle-point linear systems that arise from spatial discretization of unsteady and steady variable-coefficient Stokes equations on a uniform staggered grid. Building on the success of using the classical projection method as a preconditioner for the coupled velocity-pressure system [B. E. Griffith, J. Comp. Phys., 228 (2009), pp. 756575… ▽ More We investigate several robust preconditioners for solving the saddle-point linear systems that arise from spatial discretization of unsteady and steady variable-coefficient Stokes equations on a uniform staggered grid. Building on the success of using the classical projection method as a preconditioner for the coupled velocity-pressure system [B. E. Griffith, J. Comp. Phys., 228 (2009), pp. 75657595], as well as established techniques for steady and unsteady Stokes flow in the finite-element literature, we construct preconditioners that employ independent generalized Helmholtz and Poisson solvers for the velocity and pressure subproblems. We demonstrate that only a single cycle of a standard geometric multigrid algorithm serves as an effective inexact solver for each of these subproblems. Contrary to traditional wisdom, we find that the Stokes problem can be solved nearly as efficiently as the independent pressure and velocity subproblems, making the overall cost of solving the Stokes system comparable to the cost of classical projection or fractional step methods for incompressible flow, even for steady flow and in the presence of large density and viscosity contrasts. Two of the five preconditioners considered here are found to be robust to GMRES restarts and to increasing problem size, making them suitable for large-scale problems. Our work opens many possibilities for constructing novel unsplit temporal integrators for finite-volume spatial discretizations of the equations of low Mach and incompressible flow dynamics. △ Less

Submitted 6 January, 2014; v1 submitted 21 August, 2013; originally announced August 2013.

Comments: Submitted to CiCP

A Minimally-Resolved Immersed Boundary Model for Reaction-Diffusion Problems

Authors: A. Pal Singh Bhalla, B. E. Griffith, N. A. Patankar, A. Donev

Abstract: We develop an immersed-boundary approach to modeling reaction-diffusion processes in dispersions of reactive spherical particles, from the diffusion-limited to the reaction-limited setting. We represent each reactive particle with a minimally-resolved 'blob' using many fewer degrees of freedom per particle than standard discretization approaches. More complicated or more highly resolved particle s… ▽ More We develop an immersed-boundary approach to modeling reaction-diffusion processes in dispersions of reactive spherical particles, from the diffusion-limited to the reaction-limited setting. We represent each reactive particle with a minimally-resolved 'blob' using many fewer degrees of freedom per particle than standard discretization approaches. More complicated or more highly resolved particle shapes can be built out of a collection of reactive blobs. We demonstrate numerically that the blob model can provide an accurate representation at low to moderate packing densities of the reactive particles, at a cost not much larger than solving a Poisson equation in the same domain. Unlike multipole expansion methods, our method does not require analytically-computed Green's functions, but rather, computes regularized discrete Green's functions on the fly by using a standard grid-based discretization of the Poisson equation. This allows for great flexibility in implementing different boundary conditions, coupling to fluid flow or thermal transport, and the inclusion of other effects such as temporal evolution and even nonlinearities. We develop multigrid-based preconditioners for solving the linear systems that arise when using implicit temporal discretizations or studying steady states. In the diffusion-limited case the resulting linear system is a saddle-point problem, the efficient solution of which remains a challenge for suspensions of many particles. We validate our method by comparing to published results on reaction-diffusion in ordered and disordered suspensions of reactive spheres. △ Less

Submitted 30 September, 2013; v1 submitted 13 June, 2013; originally announced June 2013.

Comments: Submitted to J.Chem.Phys

Inertial Coupling Method for particles in an incompressible fluctuating fluid

Authors: F. Balboa Usabiaga, R. Delgado-Buscalioni, B. E. Griffith, A. Donev

Abstract: We develop an inertial coupling method for modeling the dynamics of point-like 'blob' particles immersed in an incompressible fluid, generalizing previous work for compressible fluids. The coupling consistently includes excess (positive or negative) inertia of the particles relative to the displaced fluid, and accounts for thermal fluctuations in the fluid momentum equation. The coupling between t… ▽ More We develop an inertial coupling method for modeling the dynamics of point-like 'blob' particles immersed in an incompressible fluid, generalizing previous work for compressible fluids. The coupling consistently includes excess (positive or negative) inertia of the particles relative to the displaced fluid, and accounts for thermal fluctuations in the fluid momentum equation. The coupling between the fluid and the blob is based on a no-slip constraint equating the particle velocity with the local average of the fluid velocity, and conserves momentum and energy. We demonstrate that the formulation obeys a fluctuation-dissipation balance, owing to the non-dissipative nature of the no-slip coupling. We develop a spatio-temporal discretization that preserves, as best as possible, these properties of the continuum formulation. In the spatial discretization, the local averaging and spreading operations are accomplished using compact kernels commonly used in immersed boundary methods. We find that the special properties of these kernels make the discrete blob a particle with surprisingly physically-consistent volume, mass, and hydrodynamic properties. We develop a second-order semi-implicit temporal integrator that maintains discrete fluctuation-dissipation balance, and is not limited in stability by viscosity. Furthermore, the temporal scheme requires only constant-coefficient Poisson and Helmholtz linear solvers, enabling a very efficient and simple FFT-based implementation on GPUs. We numerically investigate the performance of the method on several standard test problems... △ Less

Submitted 28 July, 2015; v1 submitted 27 December, 2012; originally announced December 2012.

Comments: Contains a number of corrections and an additional Figure 7 (and associated discussion) relative to published version

Journal ref: Computer Methods in Applied Mechanics and Engineering, 269:139-172, 2014

Temporal Integrators for Fluctuating Hydrodynamics

Authors: S. Delong, B. E. Griffith, E. Vanden-Eijnden, A. Donev

Abstract: Including the effect of thermal fluctuations in traditional computational fluid dynamics requires develo** numerical techniques for solving the stochastic partial differential equations of fluctuating hydrodynamics. These Langevin equations possess a special fluctuation-dissipation structure that needs to be preserved by spatio-temporal discretizations in order for the computed solution to repro… ▽ More Including the effect of thermal fluctuations in traditional computational fluid dynamics requires develo** numerical techniques for solving the stochastic partial differential equations of fluctuating hydrodynamics. These Langevin equations possess a special fluctuation-dissipation structure that needs to be preserved by spatio-temporal discretizations in order for the computed solution to reproduce the correct long-time behavior. In particular, numerical solutions should approximate the Gibbs-Boltzmann equilibrium distribution, and ideally this will hold even for large time step sizes. We describe finite-volume spatial discretizations for the fluctuating Burgers and fluctuating incompressible Navier-Stokes equations that obey a discrete fluctuation-dissipation balance principle just like the continuum equations. We develop implicit-explicit predictor-corrector temporal integrators for the resulting stochastic method-of-lines discretization. These stochastic Runge-Kutta schemes treat diffusion implicitly and advection explicitly, are weakly second-order accurate for additive noise for small time steps, and give a good approximation to the equilibrium distribution even for very strong fluctuations. Numerical results demonstrate that a midpoint predictor-corrector scheme is very robust over a broad range of time step sizes. △ Less

Submitted 21 February, 2013; v1 submitted 5 December, 2012; originally announced December 2012.

Comments: Submitted to Phys. Rev. E

Staggered Schemes for Fluctuating Hydrodynamics

Authors: F. B. Balboa, J. B. BelL, R. Delgado-Buscalioni, A. Donev, T. G. Fai, B. E. Griffith, C. S. Peskin

Abstract: We develop numerical schemes for solving the isothermal compressible and incompressible equations of fluctuating hydrodynamics on a grid with staggered momenta. We develop a second-order accurate spatial discretization of the diffusive, advective and stochastic fluxes that satisfies a discrete fluctuation-dissipation balance, and construct temporal discretizations that are at least second-order ac… ▽ More We develop numerical schemes for solving the isothermal compressible and incompressible equations of fluctuating hydrodynamics on a grid with staggered momenta. We develop a second-order accurate spatial discretization of the diffusive, advective and stochastic fluxes that satisfies a discrete fluctuation-dissipation balance, and construct temporal discretizations that are at least second-order accurate in time deterministically and in a weak sense. Specifically, the methods reproduce the correct equilibrium covariances of the fluctuating fields to third (compressible) and second (incompressible) order in the time step, as we verify numerically. We apply our techniques to model recent experimental measurements of giant fluctuations in diffusively mixing fluids in a micro-gravity environment [A. Vailati et. al., Nature Communications 2:290, 2011]. Numerical results for the static spectrum of non-equilibrium concentration fluctuations are in excellent agreement between the compressible and incompressible simulations, and in good agreement with experimental results for all measured wavenumbers. △ Less

Submitted 24 May, 2012; v1 submitted 25 August, 2011; originally announced August 2011.

Comments: Submitted. See also arXiv:0906.2425