Showing 1–41 of 41 results for author: Griffin, R

A self-aligning recirculated crossed optical dipole trap for lithium atoms

Authors: Ming Lian, Maximillian Mrozek-McCourt, Christopher K. Angyal, Dadbeh Shaddel, Zachary J. Blogg, John R. Griffin, Ian Crawley, Ariel T. Sommer

Abstract: Crossed optical dipole traps (ODTs) provide three-dimensional confinement of cold atoms and other optically trappable particles. However, the need to maintain the intersection of the two trap** beams poses strict requirements on alignment stability, and limits the ability to move the trap. Here we demonstrate a novel crossed ODT design that features inherent stability of the beam crossing, allow… ▽ More Crossed optical dipole traps (ODTs) provide three-dimensional confinement of cold atoms and other optically trappable particles. However, the need to maintain the intersection of the two trap** beams poses strict requirements on alignment stability, and limits the ability to move the trap. Here we demonstrate a novel crossed ODT design that features inherent stability of the beam crossing, allowing the trap to move and remain aligned. The trap consists of a single high-power laser beam, imaged back onto itself at an angle to form a crossed trap. Self-aligning behavior results from employing an imaging system with positive magnification tuned precisely to unity. We employ laser-cooled samples of $^6$Li atoms to demonstrate that the trap remains well-aligned over a 4.3 mm travel range along an axis approximately perpendicular to the plane containing the crossed beams. Our scheme can be applied to bring an atomic cloud held in a crossed ODT close to a surface or field source for various applications in quantum simulation, sensing, and information processing. △ Less

Submitted 5 June, 2024; originally announced June 2024.

Comments: 9 pages, 5 figures

Identification of defects and the origins of surface noise on hydrogen-terminated (100) diamond

Authors: Yi-Ying Sung, Lachlan Oberg, Rebecca Griffin, Alex K. Schenk, Henry Chandler, Santiago Corujeira Gallo, Alastair Stacey, Tetiana Sergeieva, Marcus W. Doherty, Cedric Weber, Christopher I. Pakes

Abstract: Near-surface nitrogen-vacancy centres are critical to many diamond-based quantum technologies such as information processors and nanosensors. Surface defects play an important role in the design and performance of these devices. The targeted creation of defects is central to proposed bottom-up approaches to nanofabrication of quantum diamond processors, and uncontrolled surface defects may generat… ▽ More Near-surface nitrogen-vacancy centres are critical to many diamond-based quantum technologies such as information processors and nanosensors. Surface defects play an important role in the design and performance of these devices. The targeted creation of defects is central to proposed bottom-up approaches to nanofabrication of quantum diamond processors, and uncontrolled surface defects may generate noise and charge trap** which degrade shallow NV device performance. Surface preparation protocols may be able to control the production of desired defects and eliminate unwanted defects, but only if their atomic structure can first be conclusively identified. This work uses a combination of scanning tunnelling microscopy (STM) imaging and first-principles simulations to identify several surface defects on H:C(100)-2x1 surfaces prepared using chemical vapour deposition (CVD). The atomic structure of these defects is elucidated, from which the microscopic origins of magnetic noise and charge trap** is determined based on modelling of their paramagnetic properties and acceptor states. Rudimentary control of these deleterious properties is demonstrated through STM tip-induced manipulation of the defect structure. Furthermore, the results validate accepted models for CVD diamond growth by identifying key adsorbates responsible for nucleation of new layers. △ Less

Submitted 29 May, 2024; originally announced May 2024.

Comments: 15 pages, 14 figures, combined manuscript and supporting information

Physically Consistent Online Inertial Adaptation for Humanoid Loco-manipulation

Authors: James Foster, Stephen McCrory, Christian DeBuys, Sylvain Bertrand, Robert Griffin

Abstract: The ability to accomplish manipulation and locomotion tasks in the presence of significant time-varying external loads is a remarkable skill of humans that has yet to be replicated convincingly by humanoid robots. Such an ability will be a key requirement in the environments we envision deploying our robots: dull, dirty, and dangerous. External loads constitute a large model bias, which is typical… ▽ More The ability to accomplish manipulation and locomotion tasks in the presence of significant time-varying external loads is a remarkable skill of humans that has yet to be replicated convincingly by humanoid robots. Such an ability will be a key requirement in the environments we envision deploying our robots: dull, dirty, and dangerous. External loads constitute a large model bias, which is typically unaccounted for. In this work, we enable our humanoid robot to engage in loco-manipulation tasks in the presence of significant model bias due to external loads. We propose an online estimation and control framework involving the combination of a physically consistent extended Kalman filter for inertial parameter estimation coupled to a whole-body controller. We showcase our results both in simulation and in hardware, where weights are mounted on Nadia's wrist links as a proxy for engaging in tasks where large external loads are applied to the robot. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Comments: Submitted to the 2024 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)

Multi-Contact Inertial Estimation and Localization in Legged Robots

Authors: Sergi Martinez, Robert Griffin, Carlos Mastalli

Abstract: Optimal estimation is a promising tool for multi-contact inertial estimation and localization. To harness its advantages in robotics, it is crucial to solve these large and challenging optimization problems efficiently. To tackle this, we (i) develop a multiple-shooting solver that exploits both temporal and parametric structures through a parametrized Riccati recursion. Additionally, we (ii) prop… ▽ More Optimal estimation is a promising tool for multi-contact inertial estimation and localization. To harness its advantages in robotics, it is crucial to solve these large and challenging optimization problems efficiently. To tackle this, we (i) develop a multiple-shooting solver that exploits both temporal and parametric structures through a parametrized Riccati recursion. Additionally, we (ii) propose an inertial local manifold that ensures its full physical consistency. It also enhances convergence compared to the singularity-free log-Cholesky approach. To handle its singularities, we (iii) introduce a nullspace approach in our optimal estimation solver. We (iv) finally develop the analytical derivatives of contact dynamics for both inertial parametrizations. Our framework can successfully solve estimation problems for complex maneuvers such as brachiation in humanoids. We demonstrate its numerical capabilities across various robotics tasks and its benefits in experimental trials with the Go1 robot. △ Less

Submitted 25 March, 2024; originally announced March 2024.

Formation of a boron-oxide termination for the (100) diamond surface

Authors: Alex K. Schenk, Rebecca Griffin, Anton Tadich, Daniel Roberts, Alastair Stacey

Abstract: A boron-oxide termination of the diamond (100) surface has been formed by depositing molecular boron oxide $\rm{B_2O_3}$ onto the hydrogen-terminated (100) diamond surface under ultrahigh vacuum conditions and annealing to $\rm{950^{\circ} C}$. The resulting termination was highly oriented and chemically homogeneous, although further optimisation is required to increase the surface coverage beyond… ▽ More A boron-oxide termination of the diamond (100) surface has been formed by depositing molecular boron oxide $\rm{B_2O_3}$ onto the hydrogen-terminated (100) diamond surface under ultrahigh vacuum conditions and annealing to $\rm{950^{\circ} C}$. The resulting termination was highly oriented and chemically homogeneous, although further optimisation is required to increase the surface coverage beyond the 0.4 ML achieved here. This work demonstrates the possibility of using molecular deposition under ultrahigh vacuum conditions for complex surface engineering of the diamond surface, and may be a first step in an alternative approach to fabricating boron doped delta layers in diamond. △ Less

Submitted 3 March, 2024; v1 submitted 6 February, 2024; originally announced February 2024.

Comments: Main text 10 pages, 4 figures. Supp Info 3 pages

Efficient, Dynamic Locomotion through Step Placement with Straight Legs and Rolling Contacts

Authors: Stefan Fasano, James Foster, Sylvain Bertrand, Christian DeBuys, Robert Griffin

Abstract: For humans, fast, efficient walking over flat ground represents the vast majority of locomotion that an individual experiences on a daily basis, and for an effective, real-world humanoid robot the same will likely be the case. In this work, we propose a locomotion controller for efficient walking over near-flat ground using a relatively simple, model-based controller that utilizes a novel combinat… ▽ More For humans, fast, efficient walking over flat ground represents the vast majority of locomotion that an individual experiences on a daily basis, and for an effective, real-world humanoid robot the same will likely be the case. In this work, we propose a locomotion controller for efficient walking over near-flat ground using a relatively simple, model-based controller that utilizes a novel combination of several interesting design features including an ALIP-based step adjustment strategy, stance leg length control as an alternative to center of mass height control, and rolling contact for heel-to-toe motion of the stance foot. We then present the results of this controller on our robot Nadia, both in simulation and on hardware. These results include validation of this controller's ability to perform fast, reliable forward walking at 0.75 m/s along with backwards walking, side-step**, turning in place, and push recovery. We also present an efficiency comparison between the proposed control strategy and our baseline walking controller over three steady-state walking speeds. Lastly, we demonstrate some of the benefits of utilizing rolling contact in the stance foot, specifically the reduction of necessary positive and negative work throughout the stride. △ Less

Submitted 7 March, 2024; v1 submitted 19 October, 2023; originally announced October 2023.

Comments: Submitted and accepted to 2024 IEEE International Conference on Robotics and Automation (ICRA)

Authoring and Operating Humanoid Behaviors On the Fly using Coactive Design Principles

Authors: Duncan Calvert, Dexton Anderson, Tomasz Bialek, Stephen McCrory, Luigi Penco, Jerry Pratt, Robert Griffin

Abstract: Humanoid robots have the potential to perform useful tasks in a world built for humans. However, communicating intention and teaming with a humanoid robot is a multi-faceted and complex problem. In this paper, we tackle the problems associated with quickly and interactively authoring new robot behavior that works on real hardware. We bring the powerful concepts of Affordance Templates and Coactive… ▽ More Humanoid robots have the potential to perform useful tasks in a world built for humans. However, communicating intention and teaming with a humanoid robot is a multi-faceted and complex problem. In this paper, we tackle the problems associated with quickly and interactively authoring new robot behavior that works on real hardware. We bring the powerful concepts of Affordance Templates and Coactive Design methodology to this problem to attempt to solve and explain it. In our approach we use interactive stance and hand pose goals along with other types of actions to author humanoid robot behavior on the fly. We then describe how our operator interface works to author behaviors on the fly and provide interdependence analysis charts for task approach and door opening. We present timings from real robot performances for traversing a push door and doing a pick and place task on our Nadia humanoid robot. △ Less

Submitted 24 July, 2023; v1 submitted 24 July, 2023; originally announced July 2023.

Comments: 8 pages, 12 figures, for Humanoids 2023

Reachability Aware Capture Regions with Time Adjustment and Cross-Over for Step Recovery

Authors: Robert Griffin, James Foster, Stefan Fasano, Brandon Shrewsbury, Sylvain Bertrand

Abstract: For humanoid robots to live up to their potential utility, they must be able to robustly recover from instabilities. In this work, we propose a number of balance enhancements to enable the robot to both achieve specific, desired footholds in the world and adjusting the step positions and times as necessary while leveraging ankle and hip. This includes improving the calculation of capture regions f… ▽ More For humanoid robots to live up to their potential utility, they must be able to robustly recover from instabilities. In this work, we propose a number of balance enhancements to enable the robot to both achieve specific, desired footholds in the world and adjusting the step positions and times as necessary while leveraging ankle and hip. This includes improving the calculation of capture regions for bipedal locomotion to better consider how step constraints affect the ability to recover. We then explore a new strategy for performing cross-over steps to maintain stability, which greatly enhances the variety of tracking error from which the robot may recover. Our last contribution is a strategy for time adaptation during the transfer phase for recovery. We then present these results on our humanoid robot, Nadia, in both simulation and hardware, showing the robot walking over rough terrain, recovering from external disturbances, and taking cross-over steps to maintain balance. △ Less

Submitted 21 July, 2023; originally announced July 2023.

Comments: Submitted to 2023 IEEE International Conference on Humanoid Robotics (Humanoids)

Exponential Qubit Reduction in Optimization for Financial Transaction Settlement

Authors: Elias X. Huber, Benjamin Y. L. Tan, Paul R. Griffin, Dimitris G. Angelakis

Abstract: We extend the qubit-efficient encoding presented in [Tan et al., Quantum 5, 454 (2021)] and apply it to instances of the financial transaction settlement problem constructed from data provided by a regulated financial exchange. Our methods are directly applicable to any QUBO problem with linear inequality constraints. Our extension of previously proposed methods consists of a simplification in var… ▽ More We extend the qubit-efficient encoding presented in [Tan et al., Quantum 5, 454 (2021)] and apply it to instances of the financial transaction settlement problem constructed from data provided by a regulated financial exchange. Our methods are directly applicable to any QUBO problem with linear inequality constraints. Our extension of previously proposed methods consists of a simplification in varying the number of qubits used to encode correlations as well as a new class of variational circuits which incorporate symmetries, thereby reducing sampling overhead, improving numerical stability and recovering the expression of the cost objective as a Hermitian observable. We also propose optimality-preserving methods to reduce variance in real-world data and substitute continuous slack variables. We benchmark our methods against standard QAOA for problems consisting of 16 transactions and obtain competitive results. Our newly proposed variational ansatz performs best overall. We demonstrate tackling problems with 128 transactions on real quantum hardware, exceeding previous results bounded by NISQ hardware by almost two orders of magnitude. △ Less

Submitted 16 December, 2023; v1 submitted 14 July, 2023; originally announced July 2023.

Comments: 16 pages, 8 figures

Generating Humanoid Multi-Contact through Feasibility Visualization

Authors: Stephen McCrory, Sylvain Bertrand, Achintya Mohan, Duncan Calvert, Jerry Pratt, Robert Griffin

Abstract: We present a feasibility-driven teleoperation framework designed to generate humanoid multi-contact maneuvers for use in unstructured environments. Our framework is designed for motions with arbitrary contact modes and postures. The operator configures a pre-execution preview robot through contact points and kinematic tasks. A fast estimation of the preview robot's quasi-static feasibility is perf… ▽ More We present a feasibility-driven teleoperation framework designed to generate humanoid multi-contact maneuvers for use in unstructured environments. Our framework is designed for motions with arbitrary contact modes and postures. The operator configures a pre-execution preview robot through contact points and kinematic tasks. A fast estimation of the preview robot's quasi-static feasibility is performed by checking contact stability and collisions along an interpolated trajectory. A visualization of Center of Mass (CoM) stability margin, based on friction and actuation constraints, is displayed and can be previewed if the operator chooses to add or remove contacts. Contact points can be placed anywhere on a mesh approximation of the robot surface, enabling motions with knee or forearm contacts. We demonstrate our approach in simulation and hardware on a NASA Valkyrie humanoid, focusing on multi-contact trajectories which are challenging to generate autonomously or through alternative teleoperation approaches. △ Less

Submitted 10 November, 2023; v1 submitted 14 March, 2023; originally announced March 2023.

Integrable Whole-body Orientation Coordinates for Legged Robots

Authors: Yu-Ming Chen, Gabriel Nelson, Robert Griffin, Michael Posa, Jerry Pratt

Abstract: Complex multibody legged robots can have complex rotational control challenges. In this paper, we propose a concise way to understand and formulate a \emph{whole-body orientation} that (i) depends on system configuration only and not a history of motion, (ii) can be representative of the orientation of the entire system while not being attached to any specific link, and (iii) has a rate of change… ▽ More Complex multibody legged robots can have complex rotational control challenges. In this paper, we propose a concise way to understand and formulate a \emph{whole-body orientation} that (i) depends on system configuration only and not a history of motion, (ii) can be representative of the orientation of the entire system while not being attached to any specific link, and (iii) has a rate of change that approximates total system angular momentum. We relate this orientation coordinate to past work, and discuss and demonstrate, including on hardware, several different uses for it. △ Less

Submitted 31 July, 2023; v1 submitted 14 October, 2022; originally announced October 2022.

Proprioceptive State Estimation of Legged Robots with Kinematic Chain Modeling

Authors: Varun Agrawal, Sylvain Bertrand, Robert Griffin, Frank Dellaert

Abstract: Legged robot locomotion is a challenging task due to a myriad of sub-problems, such as the hybrid dynamics of foot contact and the effects of the desired gait on the terrain. Accurate and efficient state estimation of the floating base and the feet joints can help alleviate much of these issues by providing feedback information to robot controllers. Current state estimation methods are highly reli… ▽ More Legged robot locomotion is a challenging task due to a myriad of sub-problems, such as the hybrid dynamics of foot contact and the effects of the desired gait on the terrain. Accurate and efficient state estimation of the floating base and the feet joints can help alleviate much of these issues by providing feedback information to robot controllers. Current state estimation methods are highly reliant on a conjunction of visual and inertial measurements to provide real-time estimates, thus being handicapped in perceptually poor environments. In this work, we show that by leveraging the kinematic chain model of the robot via a factor graph formulation, we can perform state estimation of the base and the leg joints using primarily proprioceptive inertial data. We perform state estimation using a combination of preintegrated IMU measurements, forward kinematic computations, and contact detections in a factor-graph based framework, allowing our state estimate to be constrained by the robot model. Experimental results in simulation and on hardware show that our approach out-performs current proprioceptive state estimation methods by 27% on average, while being generalizable to a variety of legged robot platforms. We demonstrate our results both quantitatively and qualitatively on a wide variety of trajectories. △ Less

Submitted 19 December, 2022; v1 submitted 12 September, 2022; originally announced September 2022.

Comments: Published in Humanoids 2022

Observing Nearby Nuclei on Paramagnetic Trityls and MOFs via DNP and Electron Decoupling

Authors: Kong Ooi Tan, Luming Yang, Michael Mardini, Choon Boon Cheong, Benoit Driesschaert, Mircea Dincă, Robert G Griffin

Abstract: Dynamic nuclear polarization (DNP) is an NMR sensitivity enhancement technique that mediates polarization transfer from unpaired electrons to NMR-active nuclei. Despite its success in elucidating important structural information on biological and inorganic materials, the detailed polarization-transfer pathway-from the electrons to the nearby and then the bulk solvent nuclei, and finally to the mol… ▽ More Dynamic nuclear polarization (DNP) is an NMR sensitivity enhancement technique that mediates polarization transfer from unpaired electrons to NMR-active nuclei. Despite its success in elucidating important structural information on biological and inorganic materials, the detailed polarization-transfer pathway-from the electrons to the nearby and then the bulk solvent nuclei, and finally to the molecules of interest-remains unclear. In particular, the nuclei in the paramagnetic polarizing agent play significant roles in relaying the enhanced NMR polarizations to more remote nuclei. Despite their importance, the direct NMR observation of these nuclei is challenging because of poor sensitivity. Here, we show that a combined DNP and electron decoupling approach can facilitate direct NMR detection of these nuclei. We achieved an ~80 % improvement in NMR intensity via electron decoupling at 0.35 T and 80 K on trityl radicals. Moreover, we recorded a DNP enhancement factor of $ε$ ~ 90 and ~11 % higher NMR intensity using electron decoupling on a paramagnetic metal-organic framework, magnesium hexaoxytriphenylene (MgHOTP MOF). △ Less

Submitted 2 August, 2022; originally announced August 2022.

A Fast, Autonomous, Bipedal Walking Behavior over Rapid Regions

Authors: Duncan Calvert, Bhavyansh Mishra, Stephen McCrory, Sylvain Bertrand, Robert Griffin, Jerry Pratt

Abstract: In trying to build humanoid robots that perform useful tasks in a world built for humans, we address the problem of autonomous locomotion. Humanoid robot planning and control algorithms for walking over rough terrain are becoming increasingly capable. At the same time, commercially available depth cameras have been getting more accurate and GPU computing has become a primary tool in AI research. I… ▽ More In trying to build humanoid robots that perform useful tasks in a world built for humans, we address the problem of autonomous locomotion. Humanoid robot planning and control algorithms for walking over rough terrain are becoming increasingly capable. At the same time, commercially available depth cameras have been getting more accurate and GPU computing has become a primary tool in AI research. In this paper, we present a newly constructed behavior control system for achieving fast, autonomous, bipedal walking, without pauses or deliberation. We achieve this using a recently published rapid planar regions perception algorithm, a height map based body path planner, an A* footstep planner, and a momentum-based walking controller. We put these elements together to form a behavior control system supported by modern software development practices and simulation tools. △ Less

Submitted 17 July, 2022; originally announced July 2022.

Integrated, stretched, and adiabatic solid effects

Authors: Yifan Quan, Jakob Steiner, Yifu Ouyang, Kong Ooi Tan, W. Thomas Wenckebach, Patrick Hautle, Robert G. Griffin

Abstract: This paper presents a theory describing the dynamic nuclear polarization (DNP) process associated with an arbitrary frequency swept microwave pulse. The theory is utilized to explain the integrated solid effect (ISE) as well as the newly discovered stretched solid effect (SSE) and adiabatic solid effect (ASE). It is verified with experiments performed at 9.4 GHz (0.34 T) on single crystals of naph… ▽ More This paper presents a theory describing the dynamic nuclear polarization (DNP) process associated with an arbitrary frequency swept microwave pulse. The theory is utilized to explain the integrated solid effect (ISE) as well as the newly discovered stretched solid effect (SSE) and adiabatic solid effect (ASE). It is verified with experiments performed at 9.4 GHz (0.34 T) on single crystals of naphthalene doped with pentacene-d14. It is shown that SSE and ASE can be more efficient than ISE. Furthermore, the theory predicts that the efficiency of the SSE improves at high magnetic fields, where the EPR linewidth is small compared to the nuclear Larmor frequency. In addition, we show that ISE, SSE, and ASE are based on similar physical principles and we suggest definitions to distinguish among them. △ Less

Submitted 16 May, 2022; originally announced May 2022.

Humanoid Path Planning over Rough Terrain using Traversability Assessment

Authors: Stephen McCrory, Bhavyansh Mishra, Jaehoon An, Robert Griffin, Jerry Pratt, Hakki Erhan Sevil

Abstract: We present a planning framework designed for humanoid navigation over challenging terrain. This framework is designed to plan a traversable, smooth, and collision-free path using a 2.5D height map. The planner is comprised of two stages. The first stage consists of an A* planner which reasons about traversability using terrain features. A novel cost function is presented which encodes the bipedal… ▽ More We present a planning framework designed for humanoid navigation over challenging terrain. This framework is designed to plan a traversable, smooth, and collision-free path using a 2.5D height map. The planner is comprised of two stages. The first stage consists of an A* planner which reasons about traversability using terrain features. A novel cost function is presented which encodes the bipedal gait directly into the graph structure, enabling natural paths that are robust to small gaps in traversability. The second stage is an optimization framework which smooths the path while further improving traversability. The planner is tested on a variety of terrains in simulation and is combined with a footstep planner and balance controller to create an integrated navigation framework, which is demonstrated on a DRC Boston Dynamics Atlas robot. △ Less

Submitted 1 March, 2022; originally announced March 2022.

Optical Confirmation of X-ray selected Galaxy clusters from the Swift AGN and Cluster survey with MDM and Pan-STARRS Data (Paper III)

Authors: Saloni Bhatiani, Xinyu Dai, Rhiannon D. Griffin, Jenna M. Nugent, Christopher S. Kochanek, Joel N. Bregman

Abstract: To understand structure formation in the universe and impose stronger constraints on the cluster mass function and cosmological models, it is important to have large galaxy cluster catalogs. The Swift AGN and Cluster Survey is a serendipitous X-ray survey aimed at building a large statistically selected X-ray cluster catalog with 442 cluster candidates in its first release. Our initial SDSS follow… ▽ More To understand structure formation in the universe and impose stronger constraints on the cluster mass function and cosmological models, it is important to have large galaxy cluster catalogs. The Swift AGN and Cluster Survey is a serendipitous X-ray survey aimed at building a large statistically selected X-ray cluster catalog with 442 cluster candidates in its first release. Our initial SDSS follow-up study confirmed $50\%$ of clusters in the SDSS footprint as z $<$ 0.5 clusters. Here, we present further optical follow-up analysis of 248 (out of 442) cluster candidates from the Swift cluster catalog using multi-band imaging from the MDM $2.4m$ telescope and the Pan-STARRS survey. We report the optical confirmation of 55 clusters with $> 3σ$ galaxy overdensities and detectable red sequences in the color-magnitude space. The majority of these confirmed clusters have redshifts z $<$ 0.6. The remaining candidates are potentially higher redshift clusters that are excellent targets for infrared observations. We report the X-ray luminosity and the optical richness for these confirmed clusters. We also discuss the distinction between X-ray and optical observables for the detected and non-detected cluster candidates. △ Less

Submitted 18 November, 2021; originally announced November 2021.

Comments: 18 pages; 6 Figures; 1 Table; accepted for publication in ApJ Supplement series

Composite-Spectrum Binaries, Paper XXIII: HD 69479/80, a 90-day binary with a cool-giant primary

Authors: R. E. M. Griffin, R. F. Griffin

Abstract: HD~69479/80 is a composite-spectrum binary whose components are a late-G giant and an early-A dwarf. The orbit has a period of only 91 days (which seems short for a system containing a cool giant with a radius of $\sim$13 solar radii), and a very small, but probably significantly non-zero, eccentricity. We separated the component spectra by a procedure of spectral subtraction, using a standard s… ▽ More HD~69479/80 is a composite-spectrum binary whose components are a late-G giant and an early-A dwarf. The orbit has a period of only 91 days (which seems short for a system containing a cool giant with a radius of $\sim$13 solar radii), and a very small, but probably significantly non-zero, eccentricity. We separated the component spectra by a procedure of spectral subtraction, using a standard single giant spectrum as a template, and found the closest match to the spectrum of the cool component to be that of 15~Cyg (G8\,III). We measured the radial velocity of the secondary component from each uncovered spectrum, solved the SB2 orbit for the system, and derived a mass ratio $m_1$\,/\,$m_2$ of 1.318. Fitting synthetic spectra to the spectra of the secondary component indicated a \teff~of 9250\,K, {\it log}\,g = 3.75, and a rotational velocity of $\sim$90\,\kms. We determined the difference in absolute magnitude, $δ$V, between the component stars to be 1.07 mag, the late-type component being the brighter; we could thence calculate radii and luminosities for both components, plot their H--R diagram positions, and fit evolutionary tracks. The best-fitting tracks indicated masses of 2.9\,\msun~for the giant and 2.2\,\msun~for the dwarf, which was fully in kee** with the mass ratio given by the SB2 orbit. The track for the dwarf star confirms that this component has begun to evolve away from the ZAMS. Fitting the corresponding isochrone to those H--R diagram positions indicated a log\,(age) of the system of approximately 8.60 Gyr since the cool star evolved from the ZAMS, which is a little younger than the ages deduced for many cool giants. We also detected the $λ$\,6707-Å~lithium line in the spectrum of the giant component, thus adding to the evidence that it is near the start of its primary ascent of the red-giant branch. △ Less

Submitted 18 September, 2020; originally announced September 2020.

Non-Linear Trajectory Optimization for Large Step-Ups: Application to the Humanoid Robot Atlas

Authors: Stefano Dafarra, Sylvain Bertrand, Robert J. Griffin, Giorgio Metta, Daniele Pucci, Jerry Pratt

Abstract: Performing large step-ups is a challenging task for a humanoid robot. It requires the robot to perform motions at the limit of its reachable workspace while straining to move its body upon the obstacle. This paper presents a non-linear trajectory optimization method for generating step-up motions. We adopt a simplified model of the centroidal dynamics to generate feasible Center of Mass trajectori… ▽ More Performing large step-ups is a challenging task for a humanoid robot. It requires the robot to perform motions at the limit of its reachable workspace while straining to move its body upon the obstacle. This paper presents a non-linear trajectory optimization method for generating step-up motions. We adopt a simplified model of the centroidal dynamics to generate feasible Center of Mass trajectories aimed at reducing the torques required for the step-up motion. The activation and deactivation of contacts at both feet are considered explicitly. The output of the planner is a Center of Mass trajectory plus an optimal duration for each walking phase. These desired values are stabilized by a whole-body controller that determines a set of desired joint torques. We experimentally demonstrate that by using trajectory optimization techniques, the maximum torque required to the full-size humanoid robot Atlas can be reduced up to 20% when performing a step-up motion. △ Less

Submitted 25 April, 2020; originally announced April 2020.

Comments: This article has been included in the first author's PhD thesis arXiv:2004.07699

0-Step Capturability, Motion Decomposition and Global Feedback Control of the 3D Variable Height-Inverted Pendulum

Authors: Gabriel Garcia, Robert Griffin, Jerry Pratt

Abstract: One common method for stabilizing robots after a push is the Instantaneous Capture Point, however, this has the fundamental limitation of assuming constant height. Although there are several works for balancing bipedal robots including height variations in 2D, the amount of literature on 3D models is limited. There are optimization methods using variable Center of Pressure (CoP) and reaction force… ▽ More One common method for stabilizing robots after a push is the Instantaneous Capture Point, however, this has the fundamental limitation of assuming constant height. Although there are several works for balancing bipedal robots including height variations in 2D, the amount of literature on 3D models is limited. There are optimization methods using variable Center of Pressure (CoP) and reaction force to the ground, although they do not provide the physical region where a robot can step and require a precomputation for the analysis. This work provides the necessary and sufficient conditions to maintain balance of the 3D Variable Height Inverted Pendulum (VHIP) with both, fixed and variable CoP. We also prove that the 3D VHIP with Fixed CoP is the same as its 2D version, and we generalize controllers working on the 2D VHIP to the 3D VHIP. We also show the generalization of the Divergent Component of Motion to the 3D VHIP and we provide an alternative motion decomposition for the analysis of height and CoP strategies independently. This allow us to generalize previous global feedback controllers done in the 2D VHIP to the 3D VHIP with a Variable CoP. △ Less

Submitted 12 December, 2019; originally announced December 2019.

Comments: 13 pages, 12 figures, To be submitted - RA-L

Deploying the NASA Valkyrie Humanoid for IED Response: An Initial Approach and Evaluation Summary

Authors: Steven Jens Jorgensen, Michael W. Lanighan, Sylvain S. Bertrand, Andrew Watson, Joseph S. Altemus, R. Scott Askew, Lyndon Bridgwater, Beau Domingue, Charlie Kendrick, Jason Lee, Mark Paterson, Jairo Sanchez, Patrick Beeson, Seth Gee, Stephen Hart, Ana Huaman Quispe, Robert Griffin, Inho Lee, Stephen McCrory, Luis Sentis, Jerry Pratt, Joshua S. Mehling

Abstract: As part of a feasibility study, this paper shows the NASA Valkyrie humanoid robot performing an end-to-end improvised explosive device (IED) response task. To demonstrate and evaluate robot capabilities, sub-tasks highlight different locomotion, manipulation, and perception requirements: traversing uneven terrain, passing through a narrow passageway, opening a car door, retrieving a suspected IED,… ▽ More As part of a feasibility study, this paper shows the NASA Valkyrie humanoid robot performing an end-to-end improvised explosive device (IED) response task. To demonstrate and evaluate robot capabilities, sub-tasks highlight different locomotion, manipulation, and perception requirements: traversing uneven terrain, passing through a narrow passageway, opening a car door, retrieving a suspected IED, and securing the IED in a total containment vessel (TCV). For each sub-task, a description of the technical approach and the hidden challenges that were overcome during development are presented. The discussion of results, which explicitly includes existing limitations, is aimed at motivating continued research and development to enable practical deployment of humanoid robots for IED response. For instance, the data shows that operator pauses contribute to 50\% of the total completion time, which implies that further work is needed on user interfaces for increasing task completion efficiency. △ Less

Submitted 1 October, 2019; originally announced October 2019.

Comments: 2019 IEEE-RAS International Conference on Humanoid Robots

Footstep Planning for Autonomous Walking Over Rough Terrain

Authors: Robert J. Griffin, Georg Wiedebach, Stephen McCrory, Sylvain Bertrand, Inho Lee, Jerry Pratt

Abstract: To increase the speed of operation and reduce operator burden, humanoid robots must be able to function autonomously, even in complex, cluttered environments. For this to be possible, they must be able to quickly and efficiently compute desired footsteps to reach a goal. In this work, we present a new A* footstep planner that utilizes a planar region representation of the environment enable footst… ▽ More To increase the speed of operation and reduce operator burden, humanoid robots must be able to function autonomously, even in complex, cluttered environments. For this to be possible, they must be able to quickly and efficiently compute desired footsteps to reach a goal. In this work, we present a new A* footstep planner that utilizes a planar region representation of the environment enable footstep planning over rough terrain. To increase the number of available footholds, we present an approach to allow the use of partial footholds during the planning process. The footstep plan solutions are then post-processed to capture better solutions that lie between the lattice discretization of the footstep graph. We then demonstrate this planner over a variety of virtual and real world environments, including some that require partial footholds and rough terrain using the Atlas and Valkyrie humanoid robots. △ Less

Submitted 19 July, 2019; originally announced July 2019.

Comments: Submitted to IEEE Humanoids 2019

R Coronae Borealis: Radial-velocity and other observations, 1950-2007

Authors: M. W. Feast, R. F. Griffin, G. H. Herbig, P. A. Whitelock

Abstract: Radial-velocity observations made on more than a thousand nights are presented for the type star of the R Coronae Borealis (RCB) class. There are four principal sources: the Lick Observatory (1950-1953), the original Cambridge radial-velocity spectrometer (1968-1991), and the Haute-Provence and Cambridge Coravels (1986-1998 and 1997- 2007, respectively). In the case of the last set the size (equiv… ▽ More Radial-velocity observations made on more than a thousand nights are presented for the type star of the R Coronae Borealis (RCB) class. There are four principal sources: the Lick Observatory (1950-1953), the original Cambridge radial-velocity spectrometer (1968-1991), and the Haute-Provence and Cambridge Coravels (1986-1998 and 1997- 2007, respectively). In the case of the last set the size (equivalent width) and width (expressed as if Vsin(i)) of the Coravel cross-correlation ('dip') profiles are also given, and the variation and complexity of those profiles are discussed. Although there is often evidence of cyclical behaviour in radial velocity, no coherent periodicity is found in any of the series. From time to time, and especially over 100 days before the great decline of 2007, the atmosphere was highly disturbed, with evidence of high-velocity components. We suggest that those are associated with large turbulent elements and result in mass ejection to sufficient distances for the formation of soot and other solids and thus the initiation of RCB-type declines. We associate the changes in light and radial velocity near maximum light primarily with the combined effect of such turbulent elements, and not with coherent pulsation. There is some evidence for a variation in the mean radial velocity on a time scale of about ten thousand days. △ Less

Submitted 25 October, 2018; originally announced October 2018.

Comments: 23 pages, 11 figures, accepted for MNRAS (appendix on-line only)

Capture Point Trajectories for Reduced Knee Bend using Step Time Optimization

Authors: Robert J. Griffin, Sylvain Bertrand, Georg Wiedebach, Alexander Leonessa, Jerry Pratt

Abstract: Traditional force-controlled bipedal walking utilizes highly bent knees, resulting in high torques as well as inefficient, and unnatural motions. Even with advanced planning of center of mass height trajectories, significant amounts of knee-bend can be required due to arbitrarily chosen step timing. In this work, we present a method that examines the effects of adjusting the step timing to produce… ▽ More Traditional force-controlled bipedal walking utilizes highly bent knees, resulting in high torques as well as inefficient, and unnatural motions. Even with advanced planning of center of mass height trajectories, significant amounts of knee-bend can be required due to arbitrarily chosen step timing. In this work, we present a method that examines the effects of adjusting the step timing to produce plans that only require a specified amount of knee bend to execute. We define a quadratic program that optimizes the step timings and is executed using a simple iterative feedback approach to account for higher order terms. We then illustrate the effectiveness of this algorithm by comparing the walking gait of the simulated Atlas humanoid with and without the algorithm, showing that the algorithm significantly reduces the required knee bend for execution. We aim to later use this approach to achieve natural, efficient walking motions on humanoid robot platforms. △ Less

Submitted 27 December, 2017; v1 submitted 11 September, 2017; originally announced September 2017.

Journal ref: Humanoid Robots (Humanoids), 2017 IEEE-RAS 17th International Conference on

Straight-Leg Walking Through Underconstrained Whole-Body Control

Authors: Robert J. Griffin, Georg Wiedebach, Sylvain Bertrand, Alexander Leonessa, Jerry Pratt

Abstract: We present an approach for achieving a natural, efficient gait on bipedal robots using straightened legs and toe-off. Our algorithm avoids complex height planning by allowing a whole-body controller to determine the straightest possible leg configuration at run-time. The controller solutions are biased towards a straight leg configuration by projecting leg joint angle objectives into the null-spac… ▽ More We present an approach for achieving a natural, efficient gait on bipedal robots using straightened legs and toe-off. Our algorithm avoids complex height planning by allowing a whole-body controller to determine the straightest possible leg configuration at run-time. The controller solutions are biased towards a straight leg configuration by projecting leg joint angle objectives into the null-space of the other quadratic program motion objectives. To allow the legs to remain straight throughout the gait, toe-off was utilized to increase the kinematic reachability of the legs. The toe-off motion is achieved through underconstraining the foot position, allowing it to emerge naturally. We applied this approach of under-specifying the motion objectives to the Atlas humanoid, allowing it to walk over a variety of terrain. We present both experimental and simulation results and discuss performance limitations and potential improvements. △ Less

Submitted 11 September, 2017; originally announced September 2017.

Comments: Submitted to 2018 IEEE International Conference on Robotics and Automation

Journal ref: 2018 IEEE International Conference on Robotics and Automation

Precise orbital elements, masses and parallax of the spectroscopic-interferometric binary HD 26441

Authors: Jose A. Docobo, Roger F. Griffin, Pedro P. Campo, Ahmad A. Abushattal

Abstract: The orbit of the visual-speckle binary A 2801 (HD 26441) was calculated independently of the previously published double-lined spectroscopic solution, obtaining similar values for the common orbital elements. In this way, it has been possible to provide a consistent 3D orbit and precise values for both the orbital parallax and the individual masses of the components, so the physical properties of… ▽ More The orbit of the visual-speckle binary A 2801 (HD 26441) was calculated independently of the previously published double-lined spectroscopic solution, obtaining similar values for the common orbital elements. In this way, it has been possible to provide a consistent 3D orbit and precise values for both the orbital parallax and the individual masses of the components, so the physical properties of this stellar system are determined. △ Less

Submitted 11 April, 2017; originally announced April 2017.

Walking Stabilization Using Step Timing and Location Adjustment on the Humanoid Robot, Atlas

Authors: Robert J. Griffin, Georg Wiedebach, Sylvain Bertrand, Alexander Leonessa, Jerry Pratt

Abstract: While humans are highly capable of recovering from external disturbances and uncertainties that result in large tracking errors, humanoid robots have yet to reliably mimic this level of robustness. Essential to this is the ability to combine traditional "ankle strategy" balancing with step timing and location adjustment techniques. In doing so, the robot is able to step quickly to the necessary lo… ▽ More While humans are highly capable of recovering from external disturbances and uncertainties that result in large tracking errors, humanoid robots have yet to reliably mimic this level of robustness. Essential to this is the ability to combine traditional "ankle strategy" balancing with step timing and location adjustment techniques. In doing so, the robot is able to step quickly to the necessary location to continue walking. In this work, we present both a new swing speed up algorithm to adjust the step timing, allowing the robot to set the foot down more quickly to recover from errors in the direction of the current capture point dynamics, and a new algorithm to adjust the desired footstep, expanding the base of support to utilize the center of pressure (CoP)-based ankle strategy for balance. We then utilize the desired centroidal moment pivot (CMP) to calculate the momentum rate of change for our inverse-dynamics based whole-body controller. We present simulation and experimental results using this work, and discuss performance limitations and potential improvements. △ Less

Submitted 27 December, 2017; v1 submitted 1 March, 2017; originally announced March 2017.

Journal ref: Intelligent Robots and Systems (IROS), 2017 IEEE/RSJ International Conference on

Step** Forward with Exoskeletons: Team IHMC's Design and Approach in the 2016 Cybathlon

Authors: Robert Griffin, Tyson Cobb, Travis Craig, Mark Daniel, Nick van Dijk, Jeremy Gines, Koen Kramer, Shriya Shah, Olger Siebinga, Jesper Smith, Peter Neuhaus

Abstract: Exoskeletons are a promising technology that enables individuals with mobility limitations to walk again. As the 2016 Cybathlon illustrated, however, the community has a considerable way to go before exoskeletons have the necessary capabilities to be incorporated into daily life. While most exoskeletons power only hip and knee flexion, Team Institute for Human and Machine Cognition (IHMC) presents… ▽ More Exoskeletons are a promising technology that enables individuals with mobility limitations to walk again. As the 2016 Cybathlon illustrated, however, the community has a considerable way to go before exoskeletons have the necessary capabilities to be incorporated into daily life. While most exoskeletons power only hip and knee flexion, Team Institute for Human and Machine Cognition (IHMC) presents a new exoskeleton, Mina v2, which includes a powered ankle dorsi/plantar flexion. As our entry to the 2016 Cybathlon Powered Exoskeleton Competition, Mina v2's performance allowed us to explore the effectiveness of its powered ankle compared to other powered exoskeletons for pilots with paraplegia. We designed our gaits to incorporate powered ankle plantar flexion to help improve mobility, which allowed our pilot to navigate the given Cybathlon tasks quickly, including those that required ascending movements, and reliably achieve average, conservative walking speeds of 1.04 km/h (0.29 m/s). This enabled our team to place second overall in the Powered Exoskeleton Competition in the 2016 Cybathlon. △ Less

Submitted 24 December, 2017; v1 submitted 28 February, 2017; originally announced February 2017.

Journal ref: IEEE Robotics & Automation Magazine, Volume: 24, Issue 4, Dec. 2017

Walking on Partial Footholds Including Line Contacts with the Humanoid Robot Atlas

Authors: Georg Wiedebach, Sylvain Bertrand, Tingfan Wu, Luca Fiorio, Stephen McCrory, Robert Griffin, Francesco Nori, Jerry Pratt

Abstract: We present a method for humanoid robot walking on partial footholds such as small step** stones and rocks with sharp surfaces. Our algorithm does not rely on prior knowledge of the foothold, but information about an expected foothold can be used to improve the step** performance. After a step is taken, the robot explores the new contact surface by attempting to shift the center of pressure aro… ▽ More We present a method for humanoid robot walking on partial footholds such as small step** stones and rocks with sharp surfaces. Our algorithm does not rely on prior knowledge of the foothold, but information about an expected foothold can be used to improve the step** performance. After a step is taken, the robot explores the new contact surface by attempting to shift the center of pressure around the foot. The available foothold is inferred by the way in which the foot rotates about contact edges and/or by the achieved center of pressure locations on the foot during exploration. This estimated contact area is then used by a whole body momentum-based control algorithm. To walk and balance on partial footholds, we combine fast, dynamic step** with the use of upper body angular momentum to regain balance. We applied this method to the Atlas humanoid designed by Boston Dynamics to walk over small contact surfaces, such as line and point contacts. We present experimental results and discuss performance limitations. △ Less

Submitted 12 January, 2017; v1 submitted 27 July, 2016; originally announced July 2016.

Comments: in 2016 IEEE-RAS 16th International Conference on Humanoid Robots (Humanoids)

Constraining Gamma-Ray Emission from Luminous Infrared Galaxies with Fermi-LAT; Tentative Detection of Arp 220

Authors: Rhiannon D. Griffin, Xinyu Dai, Todd A. Thompson

Abstract: Star-forming galaxies produce gamma-rays primarily via pion production, resulting from inelastic collisions between cosmic ray protons and the interstellar medium (ISM). The dense ISM and high star formation rates of luminous and ultra-luminous infrared galaxies (LIRGs and ULIRGs) imply that they should be strong gamma-ray emitters, but so far only two LIRGs have been detected. Theoretical models… ▽ More Star-forming galaxies produce gamma-rays primarily via pion production, resulting from inelastic collisions between cosmic ray protons and the interstellar medium (ISM). The dense ISM and high star formation rates of luminous and ultra-luminous infrared galaxies (LIRGs and ULIRGs) imply that they should be strong gamma-ray emitters, but so far only two LIRGs have been detected. Theoretical models for their emission depend on the unknown fraction of cosmic ray protons that escape these galaxies before interacting. We analyze Fermi-LAT data for 82 of the brightest IRAS LIRGs and ULIRGs. We examine each system individually and carry out a stacking analysis to constrain their gamma-ray fluxes. We report the detection of the nearest ULIRG Arp 220 (~4.6sigma). We observe a gamma-ray flux (0.8--100 GeV) of 2.4e-10 phot cm^-2 s^-1 with photon index of 2.23 (8.2e10^41 ergs s^-1 at 77 Mpc) We also derive upper limits for the stacked LIRGs and ULIRGs. The gamma-ray luminosity of Arp~220 and the stacked upper limits agree with calorimetric predictions for dense star-forming galaxies. With the detection of Arp 220, we extend the gamma-ray--IR luminosity correlation to the high luminosity regime with log(L_[0.1-100 GeV]) = 1.25log(L_[8-1000]) + 26.7 as well as the gamma-ray--radio continuum luminosity correlation with log(L_[0.1-100 GeV]) = 1.22log(L_[1.4 GHz]) + 13.3. The current survey of Fermi-LAT is on the verge of detecting more LIRGs/ULIRGs in the local universe, and we expect even more detections with deeper Fermi-LAT observations or the next generation of gamma-ray detectors. △ Less

Submitted 4 May, 2016; v1 submitted 22 March, 2016; originally announced March 2016.

Comments: 14 single column pages, 4 figures, accepted by ApJL

The peculiar abundance pattern of the new Hg-Mn star HD 30085

Authors: R. Monier, M. Gebran, F. Royer, R. E. M. Griffin

Abstract: Using high-dispersion, high-quality spectra of HD 30085 obtained with the echelle spectrograph SOPHIE at Observatoire de Haute Provence, we show that this star contains strong lines of the s-process elements Sr II, Y II and Zr II. Line syntheses of the lines yield large overabundances of Sr, Y, Zr which are characteristic of HgMn stars. The Sr-Y-Zr triad of abundances is inverted in HD 30085 compa… ▽ More Using high-dispersion, high-quality spectra of HD 30085 obtained with the echelle spectrograph SOPHIE at Observatoire de Haute Provence, we show that this star contains strong lines of the s-process elements Sr II, Y II and Zr II. Line syntheses of the lines yield large overabundances of Sr, Y, Zr which are characteristic of HgMn stars. The Sr-Y-Zr triad of abundances is inverted in HD 30085 compared to that in our solar system. The violation of the odd-even rule suggests that physical processes such as radiative diffusion, chemical fractionation and others must be at work in the atmosphere of HD 30085, and that the atmosphere is stable enough to sustain them. △ Less

Submitted 3 July, 2015; originally announced July 2015.

Comments: 4 pages, SF2A conference proceeding

The Swift AGN and Cluster Survey. II. Cluster Confirmation with SDSS Data

Authors: Rhiannon D. Griffin, Xinyu Dai, Christopher S. Kochanek, Joel N. Bregman

Abstract: We study 203 (of 442) Swift AGN and Cluster Survey extended X-ray sources located in the SDSS DR8 footprint to search for galaxy over-densities in three dimensional space using SDSS galaxy photometric redshifts and positions near the Swift cluster candidates. We find 104 Swift clusters with a >3sigma galaxy over-density. The remaining targets are potentially located at higher redshifts and require… ▽ More We study 203 (of 442) Swift AGN and Cluster Survey extended X-ray sources located in the SDSS DR8 footprint to search for galaxy over-densities in three dimensional space using SDSS galaxy photometric redshifts and positions near the Swift cluster candidates. We find 104 Swift clusters with a >3sigma galaxy over-density. The remaining targets are potentially located at higher redshifts and require deeper optical follow-up observations for confirmation as galaxy clusters. We present a series of cluster properties including the redshift, BCG magnitude, BCG-to-X-ray center offset, optical richness, and X-ray luminosity. We also detect red sequences in ~85% of the 104 confirmed clusters. The X-ray luminosity and optical richness for the SDSS confirmed Swift clusters are correlated and follow previously established relations. The distribution of the separations between the X-ray centroids and the most likely BCG is also consistent with expectation. We compare the observed redshift distribution of the sample with a theoretical model, and find that our sample is complete for z <~ 0.3 and is still 80% complete up to z ~= 0.4, consistent with the SDSS survey depth. These analysis results suggest that our Swift cluster selection algorithm has yielded a statistically well-defined cluster sample for further studying cluster evolution and cosmology. We also match our SDSS confirmed Swift clusters to existing cluster catalogs, and find 42, 23 and 1 matches in optical, X-ray and SZ catalogs, respectively, so the majority of these clusters are new detections. △ Less

Submitted 15 January, 2016; v1 submitted 14 May, 2015; originally announced May 2015.

Comments: 38 pages, 12 figures, 6 tables. Accepted in ApJS

The SWIFT AGN and Cluster Survey I: Number Counts of AGN and Galaxy Clusters

Authors: Xinyu Dai, Rhiannon D. Griffin, Christopher S. Kochanek, Jenna M. Nugent, Joel N. Bregman

Abstract: The Swift AGN and Cluster Survey (SACS) uses 125 deg^2 of Swift XRT serendipitous fields with variable depths surrounding gamma-ray bursts to provide a medium depth (4e-15 erg/s/cm^2) and area survey filling the gap between deep, narrow Chandra/XMM-Newton surveys and wide, shallow ROSAT surveys. Here we present a catalog of 22,563 point sources and 442 extended sources and examine the number count… ▽ More The Swift AGN and Cluster Survey (SACS) uses 125 deg^2 of Swift XRT serendipitous fields with variable depths surrounding gamma-ray bursts to provide a medium depth (4e-15 erg/s/cm^2) and area survey filling the gap between deep, narrow Chandra/XMM-Newton surveys and wide, shallow ROSAT surveys. Here we present a catalog of 22,563 point sources and 442 extended sources and examine the number counts of the AGN and galaxy cluster populations. SACS provides excellent constraints on the AGN number counts at the bright end with negligible uncertainties due to cosmic variance, and these constraints are consistent with previous measurements. We use Wise mid-infrared (MIR) colors to classify the sources. For AGN we can roughly separate the point sources into MIR-red and MIR-blue AGN, finding roughly equal numbers of each type in the soft X-ray band (0.5-2 keV), but fewer MIR-blue sources in the hard X-ray band (2-8 keV). The cluster number counts, with 5% uncertainties from cosmic variance, are also consistent with previous surveys but span a much larger continuous flux range. Deep optical or IR follow-up observations of this cluster sample will significantly increase the number of higher redshift (z > 0.5) X-ray-selected clusters. △ Less

Submitted 11 March, 2015; originally announced March 2015.

Comments: 44 pages, 18 figures, 12 tables, Accepted by ApJS

New Limits On Gamma-Ray Emission From Galaxy Clusters

Authors: Rhiannon D. Griffin, Xinyu Dai, Christopher S. Kochanek

Abstract: Galaxy clusters are predicted to produce gamma-rays through cosmic ray interactions and/or dark matter annihilation, potentially detectable by the Fermi Large Area Telescope (Fermi-LAT). We present a new, independent stacking analysis of Fermi-LAT photon count maps using the 78 richest nearby clusters (z<0.12) from the Two Micron All-Sky Survey (2MASS) cluster catalog. We obtain the lowest limit o… ▽ More Galaxy clusters are predicted to produce gamma-rays through cosmic ray interactions and/or dark matter annihilation, potentially detectable by the Fermi Large Area Telescope (Fermi-LAT). We present a new, independent stacking analysis of Fermi-LAT photon count maps using the 78 richest nearby clusters (z<0.12) from the Two Micron All-Sky Survey (2MASS) cluster catalog. We obtain the lowest limit on the photon flux to date, 2.3e-11 ph/s/cm^2 (95% confidence) per cluster in the 0.8-100 GeV band, which corresponds to a luminosity limit of 3.5e44 ph/s. We also constrain the emission limits in a range of narrower energy bands. Scaling to recent cosmic ray acceleration and gamma-ray emission models, we find that cosmic rays represent a negligible contribution to the intra-cluster energy density and gas pressure. △ Less

Submitted 2 October, 2014; v1 submitted 27 May, 2014; originally announced May 2014.

Comments: 5 pages, 3 figures, 2 tables, Accepted by ApJ Letters

Spectral Type and Radial Velocity Variations in Three SRC Variables

Authors: Kathleen E. Moncrieff, David G. Turner, C. Ian Short, Philip D. Bennett, David D. Balam, Roger F. Griffin

Abstract: SRC variables are M supergiants, precursors to Type II supernovae, that vary in brightness with moderately regular periods of order 100-1000 days. Although identified as pulsating stars that obey their own period-luminosity relation, few have been examined in enough detail to follow the temperature and spectral changes that they undergo during their long cycles. The present study examines such cha… ▽ More SRC variables are M supergiants, precursors to Type II supernovae, that vary in brightness with moderately regular periods of order 100-1000 days. Although identified as pulsating stars that obey their own period-luminosity relation, few have been examined in enough detail to follow the temperature and spectral changes that they undergo during their long cycles. The present study examines such changes for several SRC variables revealed by CCD spectra obtained at the Dominion Astrophysical Observatory (DAO) during 2005-2009, as well as by archival spectra from the DAO (and elsewhere) for some stars from the 1960s to 1980s, and Cambridge radial velocity spectrometer measures for Betelgeuse. Described here is our classification procedure and information on the spectral type and radial velocity changes in three of the stars. The results provide insights into the pulsation mechanism in M supergiants. △ Less

Submitted 7 March, 2011; originally announced March 2011.

Comments: To appear in the Odessa Variable Stars 2010 conference proceedings (see http://uavso.org.ua/?page=vs2010), edited by I. Andronov and V. Kovtyukh

Orbits of Six Late-type Active-Chromosphere Binaries

Authors: R. F. Griffin, N. Filiz Ak

Abstract: We present spectroscopic orbits for the active stars HD 82159 (GS Leo), HD 89959, BD +39 2587 (a visual companion to HD 112733), HD 138157 (OX Ser), HD 143705, and HD 160934. This paper is a sequel to one published in this journal in 2006, with similar avowed intention, by Galvez et al.. They showed only graphs, and gave no data, and no orbital elements apart from the periods (only two of which we… ▽ More We present spectroscopic orbits for the active stars HD 82159 (GS Leo), HD 89959, BD +39 2587 (a visual companion to HD 112733), HD 138157 (OX Ser), HD 143705, and HD 160934. This paper is a sequel to one published in this journal in 2006, with similar avowed intention, by Galvez et al.. They showed only graphs, and gave no data, and no orbital elements apart from the periods (only two of which were correct) and in some cases the eccentricities. Here we provide full information and reliable orbital elements for all the stars apart from HD 160934, which has not completed a cycle since it was first observed for radial velocity. △ Less

Submitted 11 April, 2010; originally announced April 2010.

Comments: 17 pages, 8 figures. Accepted for publication in Astrophysics & Space Science

Contribution à l'etude des binaires des types F, G, K, M IX. HD 191588, nouvelle binaire spectroscopique à raies simples de type RS Cvn, systeme triple

Authors: Roger R. F. Griffin, Nicole Ginestet, Jean-Michel Carquillat

Abstract: An accident of misidentification has brought to light the interesting system HD 191588, a new RS CVn-type spectroscopic binary. A radial-velocity study of the primary star, the only seen component, carried out at the Observatoire de Haute-Provence with the Coravel instrument and subsequently at the Cambridge Observatories with a similar one, reveals two orbital motions: a short-period orbit (60… ▽ More An accident of misidentification has brought to light the interesting system HD 191588, a new RS CVn-type spectroscopic binary. A radial-velocity study of the primary star, the only seen component, carried out at the Observatoire de Haute-Provence with the Coravel instrument and subsequently at the Cambridge Observatories with a similar one, reveals two orbital motions: a short-period orbit (60 days) and a long-period one (about 4.5 years), so this star is a triple system. The following orbital elements are obtained: (1) for the long-period orbit P = 1667+/-17 days, T = 50901 +/-67 MJD, Gamma = +2.09 +/-0.07 km/s, K = 2.51 +/-0.13 km/s, e = 0.18 +/-0.04, omega = 228deg +/- 14 deg, a1 sin i = 56.7 +/- 3.0 Gm, f(m) = 0.0026 +/-0.0004 M_sun, and (2) for the short-period orbit P = 60.0269 +/-0.0016 days, T = 50482.6 +/-3.3 MJD, gamma is var., K = 24.03 +/- 0.09 km/s, e = 0.012 +/-0.004, omega = 233 deg +/-19deg, a1 sin i = 19.83 +/-0.07 Gm, f(m) = 0.0865 +/-0.0009 M_sun. From near-infrared observations we refine the classification of the primary component and we found a spectral type of K2.5 III, and a spectrum obtained in the blue--near-UV spectral region reveals strong H and K emission lines of Ca II. The unseen secondary should be a solar-type star (F or G V); the minimum mass of the third body is that of a dwarf M star. Probably, the primary component rotates in synchronism with the orbital motion in the inner orbit; a model, based upon that hypothesis, is proposed for the system, and finally the connection of the inner binary to the long-period RS CVn group (Hall 1976) is discussed. △ Less

Submitted 28 February, 2007; originally announced February 2007.

Comments: 8 pages

Journal ref: Rom.Astron.J.13:31-38,2003

Spectroscopic Binary Orbits from Photoelectric Radial Velocities - Paper 191: HD 17310, HD 70645 and HD 80731

Authors: R. F. Griffin, H. M. J. Boffin

Abstract: The three objects have been identified as members of the recently recognized class of Gamma Doradus stars, which exhibit multi-periodic photometric variations that are thought to arise from non-radial pulsation. The particular objects treated here also prove to be spectroscopic binaries, for which we provide reliable orbits. The radial velocities exhibit unusually large residuals, in which some… ▽ More The three objects have been identified as members of the recently recognized class of Gamma Doradus stars, which exhibit multi-periodic photometric variations that are thought to arise from non-radial pulsation. The particular objects treated here also prove to be spectroscopic binaries, for which we provide reliable orbits. The radial velocities exhibit unusually large residuals, in which some of the photometric periodicities can be traced. Some of the same periodicities are also demonstrated by the observed variations in the line profiles, which are quantified here simply in terms of the line-widths. △ Less

Submitted 28 December, 2006; originally announced December 2006.

Comments: 15 pages, 5 tables (3 separate), 6 figures

Journal ref: The Observatory, 126, 401-421, 2006

Spectroscopic Binary Orbits from Photoelectric Radial Velocities -- Paper 171: HD 152028 and Hde 284195 (GK Draconis and V1094 Tauri)

Authors: R. F. Griffin, H. M. J. Boffin

Abstract: The two stars that form the subject of this paper are both short-period double- lined eclipsing binaries having non-circular orbits despite their short periods. Although the HD type of HD 152028 is G0, the integrated spectral type of the system must actually be much earlier: the B-V colour index is only about 0.37 mag and the parallax indicates an integrated absolute magnitude as bright as +1.4… ▽ More The two stars that form the subject of this paper are both short-period double- lined eclipsing binaries having non-circular orbits despite their short periods. Although the HD type of HD 152028 is G0, the integrated spectral type of the system must actually be much earlier: the B-V colour index is only about 0.37 mag and the parallax indicates an integrated absolute magnitude as bright as +1.4 mag. A published photometric investigation suggests that the primary star exhibits delta Scuti pulsations, with a period of 0.1138 days. That period is not present in the radial velocities, but we have identified a comparable periodicity in the initially excessive residuals (sigma of the order of 2 km/s) in the radial velocities of the primary star: there is an asymmetrical pulsational velocity curve with a semi-amplitude of about 3 km/s and a period of 0.1178 days. HDE 284195 was not observed by Hipparcos, but its HDE type of G0 is in reasonable agreement with its colour and the nature of its radial-velocity traces. The rotations of both stars appear to be pseudo-synchronized to the orbit. The orbital inclinations are not formally determined but they must be very high,however and there is specific evidence that the inclination of HD 152028 is very close to 90 degrees,so it is permissible to assume that the masses are scarcely above the minimum values, which in the case of HD 152028 are 1.78 and 1.42 solar mass and in that of HDE 284195 are 1.10 and 1.01 solar mass, with uncertainties below 1%.(ABRIDGED) △ Less

Submitted 5 June, 2003; originally announced June 2003.

Comments: 13 pages, 9 figures,3 tables, to appear in The Observatory in august 2003

Direct Observation of the Fourth Star in the Zeta Cancri System

Authors: J. B. Hutchings, R. F. Griffin, F. Menard

Abstract: Direct imaging of the zeta Cnc system has resolved the fourth star in the system, which is in orbit around zeta Cnc C. The presence of the fourth star has been inferred for many years from irregularities in the motion of star C, and recently from C's spectroscopic orbit. However, its mass is close to that of C, making its non-detection puzzling. Observing at wavelengths of 1.2, 1.7, and 2.2 micr… ▽ More Direct imaging of the zeta Cnc system has resolved the fourth star in the system, which is in orbit around zeta Cnc C. The presence of the fourth star has been inferred for many years from irregularities in the motion of star C, and recently from C's spectroscopic orbit. However, its mass is close to that of C, making its non-detection puzzling. Observing at wavelengths of 1.2, 1.7, and 2.2 microns with the adaptive-optics system of the CFHT, we have obtained images which very clearly reveal star D and show it to have the color of an M2 star. Its brightness is consonant with its being two M stars, which are not resolved in our observations but are likely to be in a short-period orbit, thereby accounting for the large mass and the difficulty of detection at optical wavelengths, where the magnitude difference is much larger. The positions and colors of all four stars in the system are reported and are consistent with the most recent astrometric observations. △ Less

Submitted 19 April, 2000; originally announced April 2000.

Comments: 7 pages including 3 tables, 1 figure; To appear in PASP

9 Aurigae: Strong Evidence for Non-Radial Pulsations

Authors: Kevin Krisciunas, Roger F. Griffin, Edward F. Guinan, Kenneth D. Luedeke, George P. McCook

Abstract: We present further photometric observations of the unusual F0 V star 9 Aurigae and present evidence that this star's radial velocity, spectroscopic line widths and line depths are also variable with the same frequencies as the photometric data ($f_1 \approx 0.795$ and $f_2 \approx 0.345$ d$^{-1}$). The phases of these sinusoids are stable over time scales of longer than one year, though the ampl… ▽ More We present further photometric observations of the unusual F0 V star 9 Aurigae and present evidence that this star's radial velocity, spectroscopic line widths and line depths are also variable with the same frequencies as the photometric data ($f_1 \approx 0.795$ and $f_2 \approx 0.345$ d$^{-1}$). The phases of these sinusoids are stable over time scales of longer than one year, though the amplitudes can vary, making the prediction of photometric behavior impossible. Given that a variety of other explanations have already been discounted (e.g. interactions with a close companion, the existence of a lumpy, orbiting ring of dust, or star spots) and that these variations occur on time scales an order of magnitude slower than the fundamental radial pulsation period, we have very strong evidence that 9 Aurigae exhibits non-radial {\it g}-mode pulsations. Since the power spectrum of the radial velocity data shows frequency $f_2$ but does not clearly show $f_1$, the present data suggest that $f_2$ is associated with a low degree spherical harmonic ($\ell$ = 1 or 2), while $f_1$ is associated with a higher degree harmonic. 9 Aurigae, along with such stars as $γ$ Doradus, HD 224638, HD 224945, and HD 164615, appear to constitute a new class of pulsating variables. These stars are to be found at or beyond the cool edge of the Cepheid instability strip in the HR Diagram. Prior to this, only much hotter stars have been shown to exhibit non-radial {\it g}-modes. △ Less

Submitted 7 November, 1994; v1 submitted 28 July, 1994; originally announced July 1994.

Comments: 11 pages Latex plus 5 pages of figures available via Fax or regular mail. Uses MN.STY version 1.0. Revised version for Monthly Notices of the Royal Astr. Soc