-
ExU: AI Models for Examining Multilingual Disinformation Narratives and Understanding their Spread
Authors:
Jake Vasilakes,
Zhixue Zhao,
Ivan Vykopal,
Michal Gregor,
Martin Hyben,
Carolina Scarton
Abstract:
Addressing online disinformation requires analysing narratives across languages to help fact-checkers and journalists sift through large amounts of data. The ExU project focuses on develo** AI-based models for multilingual disinformation analysis, addressing the tasks of rumour stance classification and claim retrieval. We describe the ExU project proposal and summarise the results of a user req…
▽ More
Addressing online disinformation requires analysing narratives across languages to help fact-checkers and journalists sift through large amounts of data. The ExU project focuses on develo** AI-based models for multilingual disinformation analysis, addressing the tasks of rumour stance classification and claim retrieval. We describe the ExU project proposal and summarise the results of a user requirements survey regarding the design of tools to support fact-checking.
△ Less
Submitted 30 May, 2024;
originally announced June 2024.
-
Microscale Fiber-Integrated Vector Magnetometer with On-Tip Field Biasing using NV Ensembles in Diamond Microcystals
Authors:
Jonas Homrighausen,
Frederik Hoffmann,
Jens Pogorzelski,
Peter Glösekötter,
Markus Gregor
Abstract:
In quantum sensing of magnetic fields, ensembles of NV centers in diamond offer high sensitivity, high bandwidth and outstanding spatial resolution while operating in harsh environments. Moreover, the orientation of defect centers along four crystal axes forms an intrinsic coordinate system, enabling vector magnetometry within a single diamond crystal. While most vector magnetometers rely on a kno…
▽ More
In quantum sensing of magnetic fields, ensembles of NV centers in diamond offer high sensitivity, high bandwidth and outstanding spatial resolution while operating in harsh environments. Moreover, the orientation of defect centers along four crystal axes forms an intrinsic coordinate system, enabling vector magnetometry within a single diamond crystal. While most vector magnetometers rely on a known bias magnetic field for full recovery of three-dimensional field information, employing external 3D Helmholtz coils or permanent magnets results in bulky, laboratory-bound setups, impeding miniaturization of the device. Here, a novel approach is presented that utilizes a fiber-integrated microscale coil at the fiber tip to generate a localized uniaxial magnetic field. The same fiber-tip coil is used in parallel for spin control by combining DC and microwave signals in a bias tee. To implement vector magnetometry using a uniaxial bias field, we preselect the orientation of the diamond crystal and then fully characterize it by rotating a static magnetic field in three planes of rotation. We demonstrate the measurement of vector magnetic fields in the full solid angle with a shot-noise limited sensitivity of $19.4\:\textrm{nT/Hz}^{1/2}$ and microscale spatial resolution while achieving a cross section of the fiber sensor head below $1\:\textrm{mm}^2.$
△ Less
Submitted 22 April, 2024;
originally announced April 2024.
-
Optical Tactile Sensing for Aerial Multi-Contact Interaction: Design, Integration, and Evaluation
Authors:
Emanuele Aucone,
Carmelo Sferrazza,
Manuel Gregor,
Raffaello D'Andrea,
Stefano Mintchev
Abstract:
Distributed tactile sensing for multi-force detection is crucial for various aerial robot interaction tasks. However, current contact sensing solutions on drones only exploit single end-effector sensors and cannot provide distributed multi-contact sensing. Designed to be easily mounted at the bottom of a drone, we propose an optical tactile sensor that features a large and curved soft sensing surf…
▽ More
Distributed tactile sensing for multi-force detection is crucial for various aerial robot interaction tasks. However, current contact sensing solutions on drones only exploit single end-effector sensors and cannot provide distributed multi-contact sensing. Designed to be easily mounted at the bottom of a drone, we propose an optical tactile sensor that features a large and curved soft sensing surface, a hollow structure and a new illumination system. Even when spaced only 2 cm apart, multiple contacts can be detected simultaneously using our software pipeline, which provides real-world quantities of 3D contact locations (mm) and 3D force vectors (N), with an accuracy of 1.5 mm and 0.17 N respectively. We demonstrate the sensor's applicability and reliability onboard and in real-time with two demos related to i) the estimation of the compliance of different perches and subsequent re-alignment and landing on the stiffer one, and ii) the map** of sparse obstacles. The implementation of our distributed tactile sensor represents a significant step towards attaining the full potential of drones as versatile robots capable of interacting with and navigating within complex environments.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
Beyond Image-Text Matching: Verb Understanding in Multimodal Transformers Using Guided Masking
Authors:
Ivana Beňová,
Jana Košecká,
Michal Gregor,
Martin Tamajka,
Marcel Veselý,
Marián Šimko
Abstract:
The dominant probing approaches rely on the zero-shot performance of image-text matching tasks to gain a finer-grained understanding of the representations learned by recent multimodal image-language transformer models. The evaluation is carried out on carefully curated datasets focusing on counting, relations, attributes, and others. This work introduces an alternative probing strategy called gui…
▽ More
The dominant probing approaches rely on the zero-shot performance of image-text matching tasks to gain a finer-grained understanding of the representations learned by recent multimodal image-language transformer models. The evaluation is carried out on carefully curated datasets focusing on counting, relations, attributes, and others. This work introduces an alternative probing strategy called guided masking. The proposed approach ablates different modalities using masking and assesses the model's ability to predict the masked word with high accuracy. We focus on studying multimodal models that consider regions of interest (ROI) features obtained by object detectors as input tokens. We probe the understanding of verbs using guided masking on ViLBERT, LXMERT, UNITER, and VisualBERT and show that these models can predict the correct verb with high accuracy. This contrasts with previous conclusions drawn from image-text matching probing techniques that frequently fail in situations requiring verb understanding. The code for all experiments will be publicly available https://github.com/ivana-13/guided_masking.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
Characterization of Passive CMOS Strip Sensors
Authors:
Leena Diehl,
Marta Baselga,
Ingrid Maria Gregor,
Marc Hauser,
Tomasz Hemperek,
Jan Cedric Hönig,
Karl Jakobs,
Sven Mägdefessel,
Ulrich Parzefall,
Arturo Rodriguez,
Surabhi Sharma,
Dennis Sperlich,
Liv Wiik-Fuchs,
Tianyang Wang
Abstract:
Recent advances in CMOS imaging sensor technology , e.g. in CMOS pixel sensors, have proven that the CMOS process is radiation tolerant enough to cope with certain radiation levels required for tracking layers in hadron collider experiments. With the ever-increasing area covered by silicon tracking detectors cost effective alternatives to the current silicon sensors and more integrated designs are…
▽ More
Recent advances in CMOS imaging sensor technology , e.g. in CMOS pixel sensors, have proven that the CMOS process is radiation tolerant enough to cope with certain radiation levels required for tracking layers in hadron collider experiments. With the ever-increasing area covered by silicon tracking detectors cost effective alternatives to the current silicon sensors and more integrated designs are desirable. This article describes results obtained from laboratory measurements of silicon strip sensors produced in a passive p-CMOS process. Electrical characterization and charge collection measurements with a 90Sr source and a laser with infrared wavelength showed no effect of the stitching process on the performance of the sensor.
△ Less
Submitted 1 April, 2022;
originally announced April 2022.
-
Theoretical and experimental investigation of the equation of state of boron plasmas
Authors:
Shuai Zhang,
Burkhard Militzer,
Michelle C. Gregor,
Kyle Caspersen,
Lin H. Yang,
Tadashi Ogitsu,
Damian Swift,
Amy Lazicki,
D. Erskine,
Richard A. London,
P. M. Celliers,
Joseph Nilsen,
Philip A. Sterne,
Heather D. Whitley
Abstract:
We report a theoretical equation of state (EOS) table for boron across a wide range of temperatures (5.1$\times$10$^4$-5.2$\times$10$^8$ K) and densities (0.25-49 g/cm$^3$), and experimental shock Hugoniot data at unprecedented high pressures (5608$\pm$118 GPa). The calculations are performed with full, first-principles methods combining path integral Monte Carlo (PIMC) at high temperatures and de…
▽ More
We report a theoretical equation of state (EOS) table for boron across a wide range of temperatures (5.1$\times$10$^4$-5.2$\times$10$^8$ K) and densities (0.25-49 g/cm$^3$), and experimental shock Hugoniot data at unprecedented high pressures (5608$\pm$118 GPa). The calculations are performed with full, first-principles methods combining path integral Monte Carlo (PIMC) at high temperatures and density functional theory molecular dynamics (DFT-MD) methods at lower temperatures. PIMC and DFT-MD cross-validate each other by providing coherent EOS (difference $<$1.5 Hartree/boron in energy and $<$5% in pressure) at 5.1$\times$10$^5$ K. The Hugoniot measurement is conducted at the National Ignition Facility using a planar shock platform. The pressure-density relation found in our shock experiment is on top of the shock Hugoniot profile predicted with our first-principles EOS and a semi-empirical EOS table (LEOS 50). We investigate the self diffusivity and the effect of thermal and pressure-driven ionization on the EOS and shock compression behavior in high pressure and temperature conditions We study the performance sensitivity of a polar direct-drive exploding pusher platform to pressure variations based on comparison of the first-principles calculations with LEOS 50 via 1D hydrodynamic simulations. The results are valuable for future theoretical and experimental studies and engineering design in high energy density research. (LLNL-JRNL-748227)
△ Less
Submitted 30 April, 2018;
originally announced April 2018.
-
Using LLVM-based JIT Compilation in Genetic Programming
Authors:
Michal Gregor,
Juraj Spalek
Abstract:
The paper describes an approach to implementing genetic programming, which uses the LLVM library to just-in-time compile/interpret the evolved abstract syntax trees. The solution is described in some detail, including a parser (based on FlexC++ and BisonC++) that can construct the trees from a simple toy language with C-like syntax. The approach is compared with a previous implementation (based on…
▽ More
The paper describes an approach to implementing genetic programming, which uses the LLVM library to just-in-time compile/interpret the evolved abstract syntax trees. The solution is described in some detail, including a parser (based on FlexC++ and BisonC++) that can construct the trees from a simple toy language with C-like syntax. The approach is compared with a previous implementation (based on direct execution of trees using polymorphic functors) in terms of execution speed.
△ Less
Submitted 20 January, 2017;
originally announced January 2017.
-
Fitness-based Adaptive Control of Parameters in Genetic Programming: Adaptive Value Setting of Mutation Rate and Flood Mechanisms
Authors:
Michal Gregor,
Juraj Spalek
Abstract:
This paper concerns applications of genetic algorithms and genetic programming to tasks for which it is difficult to find a representation that does not map to a highly complex and discontinuous fitness landscape. In such cases the standard algorithm is prone to getting trapped in local extremes. The paper proposes several adaptive mechanisms that are useful in preventing the search from getting t…
▽ More
This paper concerns applications of genetic algorithms and genetic programming to tasks for which it is difficult to find a representation that does not map to a highly complex and discontinuous fitness landscape. In such cases the standard algorithm is prone to getting trapped in local extremes. The paper proposes several adaptive mechanisms that are useful in preventing the search from getting trapped.
△ Less
Submitted 5 May, 2016;
originally announced May 2016.
-
Performance of the EUDET-type beam telescopes
Authors:
H. Jansen,
S. Spannagel,
J. Behr,
A. Bulgheroni,
G. Claus,
E. Corrin,
D. G. Cussans,
J. Dreyling-Eschweiler,
D. Eckstein,
T. Eichhorn,
M. Goffe,
I. M. Gregor,
D. Haas,
C. Muhl,
H. Perrey,
R. Peschke,
P. Roloff,
I. Rubinskiy,
M. Winter
Abstract:
Test beam measurements at the test beam facilities of DESY have been conducted to characterise the performance of the EUDET-type beam telescopes originally developed within the EUDET project. The beam telescopes are equipped with six sensor planes using MIMOSA26 monolithic active pixel devices. A programmable Trigger Logic Unit provides trigger logic and time stamp information on particle passage.…
▽ More
Test beam measurements at the test beam facilities of DESY have been conducted to characterise the performance of the EUDET-type beam telescopes originally developed within the EUDET project. The beam telescopes are equipped with six sensor planes using MIMOSA26 monolithic active pixel devices. A programmable Trigger Logic Unit provides trigger logic and time stamp information on particle passage. Both data acquisition framework and offline reconstruction software packages are available. User devices are easily integrable into the data acquisition framework via predefined interfaces.
The biased residual distribution is studied as a function of the beam energy, plane spacing and sensor threshold. Its standard deviation at the two centre pixel planes using all six planes for tracking in a 6\,GeV electron/positron-beam is measured to be $(2.88\,\pm\,0.08)\,\upmu\meter$.Iterative track fits using the formalism of General Broken Lines are performed to estimate the intrinsic resolution of the individual pixel planes. The mean intrinsic resolution over the six sensors used is found to be $(3.24\,\pm\,0.09)\,\upmu\meter$.With a 5\,GeV electron/positron beam, the track resolution halfway between the two inner pixel planes using an equidistant plane spacing of 20\,mm is estimated to $(1.83\,\pm\,0.03)\,\upmu\meter$ assuming the measured intrinsic resolution. Towards lower beam energies the track resolution deteriorates due to increasing multiple scattering. Threshold studies show an optimal working point of the MIMOSA26 sensors at a sensor threshold of between five and six times their RMS noise. Measurements at different plane spacings are used to calibrate the amount of multiple scattering in the material traversed and allow for corrections to the predicted angular scattering for electron beams.
△ Less
Submitted 10 May, 2016; v1 submitted 31 March, 2016;
originally announced March 2016.
-
Surface transport properties of Fe-based superconductors: The influence of degradation and inhomogeneity
Authors:
T. Plecenik,
M. Gregor,
R. Sobota,
M. Truchly,
L. Satrapinskyy,
F. Kurth,
B. Holzapfel,
K. Iida,
P. Kus,
A. Plecenik
Abstract:
Surface properties of Co-doped BaFe2As2 epitaxial superconducting thin films were inspected by X-ray photoelectron spectroscopy, scanning spreading resistance microscopy (SSRM), and point contact spectroscopy (PCS). It has been shown that surface of Fe-based superconductors degrades rapidly if being exposed to air, what results in suppression of gap-like structure on PCS spectra. Moreover, SSRM me…
▽ More
Surface properties of Co-doped BaFe2As2 epitaxial superconducting thin films were inspected by X-ray photoelectron spectroscopy, scanning spreading resistance microscopy (SSRM), and point contact spectroscopy (PCS). It has been shown that surface of Fe-based superconductors degrades rapidly if being exposed to air, what results in suppression of gap-like structure on PCS spectra. Moreover, SSRM measurements revealed inhomogeneous surface conductivity, what is consistent with strong dependence of PCS spectra on contact position. Presented results suggest that fresh surface and small probing area should be assured for surface sensitive measurements like PCS to obtain intrinsic properties of Fe-based superconductors.
△ Less
Submitted 30 July, 2013;
originally announced July 2013.
-
The HERMES Recoil Detector
Authors:
A. Airapetian,
E. C. Aschenauer,
S. Belostotski,
A. Borissov,
A. Borisenko,
J. Bowles,
I. Brodski,
V. Bryzgalov,
J. Burns,
G. P. Capitani,
V. Carassiti,
G. Ciullo,
A. Clarkson,
M. Contalbrigo,
R. De Leo,
E. De Sanctis,
M. Diefenthaler,
P. Di Nezza,
M. Düren,
M. Ehrenfried,
H. Guler,
I. M. Gregor,
M. Hartig,
G. Hill,
M. Hoek
, et al. (58 additional authors not shown)
Abstract:
For the final running period of HERA, a recoil detector was installed at the HERMES experiment to improve measurements of hard exclusive processes in charged-lepton nucleon scattering. Here, deeply virtual Compton scattering is of particular interest as this process provides constraints on generalised parton distributions that give access to the total angular momenta of quarks within the nucleon.…
▽ More
For the final running period of HERA, a recoil detector was installed at the HERMES experiment to improve measurements of hard exclusive processes in charged-lepton nucleon scattering. Here, deeply virtual Compton scattering is of particular interest as this process provides constraints on generalised parton distributions that give access to the total angular momenta of quarks within the nucleon. The HERMES recoil detector was designed to improve the selection of exclusive events by a direct measurement of the four-momentum of the recoiling particle. It consisted of three components: two layers of double-sided silicon strip sensors inside the HERA beam vacuum, a two-barrel scintillating fibre tracker, and a photon detector. All sub-detectors were located inside a solenoidal magnetic field with an integrated field strength of 1 T. The recoil detector was installed in late 2005. After the commissioning of all components was finished in September 2006, it operated stably until the end of data taking at HERA end of June 2007. The present paper gives a brief overview of the physics processes of interest and the general detector design. The recoil detector components, their calibration, the momentum reconstruction of charged particles, and the event selection are described in detail. The paper closes with a summary of the performance of the detection system.
△ Less
Submitted 6 May, 2013; v1 submitted 25 February, 2013;
originally announced February 2013.
-
Studies of YBa2Cu3O6+x degradation and surface conductivity properties by Scanning Spreading Resistance Microscopy
Authors:
Martin Truchly,
Tomas Plecenik,
Ondrej Krsko,
Maros Gregor,
Leonid Satrapinsky,
Tomas Roch,
Branislav Grancic,
Marian Mikula,
Agata Dujavova,
Stefan Chromik,
Peter Kus,
Andrej Plecenik
Abstract:
Local surface conductivity properties and surface degradation of c-axis oriented YBa2Cu3O6+x (YBCO) thin films were studied by Scanning Spreading Resistance Microscopy (SSRM). For the surface degradation studies, the YBCO surface was cleaned by ion beam etching and the SSRM surface conductivity map has been subsequently repeatedly measured over several hours in air and pure nitrogen. Average surfa…
▽ More
Local surface conductivity properties and surface degradation of c-axis oriented YBa2Cu3O6+x (YBCO) thin films were studied by Scanning Spreading Resistance Microscopy (SSRM). For the surface degradation studies, the YBCO surface was cleaned by ion beam etching and the SSRM surface conductivity map has been subsequently repeatedly measured over several hours in air and pure nitrogen. Average surface conductivity of the scanned area was gradually decreasing over time in both cases, faster in air. This was explained by oxygen out-diffusion in both cases and chemical reactions with water vapor in air. The obtained surface conductivity images also revealed its high inhomogenity on micrometer and nanometer scale with numerous regions of highly enhanced conductivity compared to the surroundings. Furthermore, it has been shown that the size of these conductive regions considerably depends on the applied voltage. We propose that such inhomogeneous surface conductivity is most likely caused by varying thickness of degraded YBCO surface layer as well as varying oxygen concentration (x parameter) within this layer, what was confirmed by scanning Auger electron microscopy (SAM). In our opinion the presented findings might be important for analysis of current-voltage and differential characteristics measured on classical planar junctions on YBCO as well as other perovskites.
△ Less
Submitted 3 January, 2013;
originally announced January 2013.
-
Directly created electrostatic micro-domains on hydroxyapatite: probing with a Kelvin Force probe and a protein
Authors:
Tomas Plecenik,
Sylvain Robin,
Maros Gregor,
Martin Truchly,
Sidney Lang,
Abbasi Gandhi,
Miroslav Zahoran,
Fathima Laffir,
Tewfik Soulimane,
Melinda Vargova,
Gustav Plesch,
Peter Kus,
Andrej Plecenik,
S. A. M. Tofail
Abstract:
Micro-domains of modified surface potential (SP) were created on hydroxyapatite (HAp) films by direct patterning by midenergy focused electron beam, typically available as a microprobe of Scanning Electron Microscopes. The SP distribution of these patterns has been studied on sub-micrometer scale by the Kelvin Probe Force Microscopy method as well as lysozyme adsorption. Since the lysozyme is posi…
▽ More
Micro-domains of modified surface potential (SP) were created on hydroxyapatite (HAp) films by direct patterning by midenergy focused electron beam, typically available as a microprobe of Scanning Electron Microscopes. The SP distribution of these patterns has been studied on sub-micrometer scale by the Kelvin Probe Force Microscopy method as well as lysozyme adsorption. Since the lysozyme is positively charged at physiological pH, it allows us to track positively and negatively charged areas of the SP patterns. Distribution of the adsorbed proteins over the domains was in good agreement with the observed SP patterns.
△ Less
Submitted 2 January, 2013;
originally announced January 2013.
-
R&D Paths of Pixel Detectors for Vertex Tracking and Radiation Imaging
Authors:
M. Battaglia,
C. Da Via,
D. Bortoletto,
R. Brenner,
M. Campbell,
P. Collins,
G. F. Dalla Betta,
P. Denes,
H. Graafsma,
I. M. Gregor,
A. Kluge,
V. Manzari,
C. Parkes,
V. Re,
P. Riedler,
G. Rizzo,
W. Snoeys,
M. Winter
Abstract:
This report reviews current trends in the R&D of semiconductor pixellated sensors for vertex tracking and radiation imaging. It identifies requirements of future HEP experiments at colliders, needed technological breakthroughs and highlights the relation to radiation detection and imaging applications in other fields of science.
This report reviews current trends in the R&D of semiconductor pixellated sensors for vertex tracking and radiation imaging. It identifies requirements of future HEP experiments at colliders, needed technological breakthroughs and highlights the relation to radiation detection and imaging applications in other fields of science.
△ Less
Submitted 1 August, 2012;
originally announced August 2012.
-
Beam-helicity asymmetry arising from deeply virtual Compton scattering measured with kinematically complete event reconstruction
Authors:
The HERMES Collaboration,
A. Airapetian,
N. Akopov,
Z. Akopov,
E. C. Aschenauer,
W. Augustyniak,
R. Avakian,
A. Avetissian,
E. Avetisyan,
S. Belostotski,
H. P. Blok,
A. Borissov,
J. Bowles,
I. Brodski,
V. Bryzgalov,
J. Burns,
M. Capiluppi,
G. P. Capitani,
E. Cisbani,
G. Ciullo,
M. Contalbrigo,
P. F. Dalpiaz,
W. Deconinck,
R. De Leo,
L. De Nardo
, et al. (111 additional authors not shown)
Abstract:
The beam-helicity asymmetry in exclusive electroproduction of real photons by the longitudinally polarized HERA positron beam scattering off an unpolarized hydrogen target is measured at HERMES. The asymmetry arises from deeply virtual Compton scattering and its interference with the Bethe--Heitler process. Azimuthal amplitudes of the beam-helicity asymmetry are extracted from a data sample consis…
▽ More
The beam-helicity asymmetry in exclusive electroproduction of real photons by the longitudinally polarized HERA positron beam scattering off an unpolarized hydrogen target is measured at HERMES. The asymmetry arises from deeply virtual Compton scattering and its interference with the Bethe--Heitler process. Azimuthal amplitudes of the beam-helicity asymmetry are extracted from a data sample consisting of $ep\rightarrow epγ$ events with detection of all particles in the final state including the recoiling proton. The installation of a recoil detector, while reducing the acceptance of the experiment, allows the elimination of background from $ep\rightarrow eNπγ$ events, which was estimated to contribute an average of about 12% to the signal in previous HERMES publications. The removal of this background from the present data sample is shown to increase the magnitude of the leading asymmetry amplitude by 0.054 +/- 0.016 to -0.328 +/- 0.027 (stat.) +/- 0.045 (syst.).
△ Less
Submitted 28 November, 2012; v1 submitted 25 June, 2012;
originally announced June 2012.
-
Effect of crystallographic anisotropy on the resistance switching phenomenon in perovskites
Authors:
T. Plecenik,
M. Tomasek,
M. Belogolovskii,
M. Truchly,
M. Gregor,
J. Noskovic,
M. Zahoran,
T. Roch,
I. Boylo,
M. Spankova,
S. Chromik,
P. Kus,
A. Plecenik
Abstract:
Resistance switching effects in metal/perovskite contacts based on epitaxial c-axis oriented Y-Ba-Cu-O (YBCO) thin films with different crystallographic orientations have been studied. Three types of Ag/YBCO junctions with the contact restricted to (i) c-axis direction, (ii) ab-plane direction, and (iii) both were designed and fabricated, and their current-voltage characteristics have been measure…
▽ More
Resistance switching effects in metal/perovskite contacts based on epitaxial c-axis oriented Y-Ba-Cu-O (YBCO) thin films with different crystallographic orientations have been studied. Three types of Ag/YBCO junctions with the contact restricted to (i) c-axis direction, (ii) ab-plane direction, and (iii) both were designed and fabricated, and their current-voltage characteristics have been measured. The type (i) junctions exhibited conventional bipolar resistance switching behavior, whereas in other two types the low-resistance state was unsteady and their resistance quickly relaxed to the initial high-resistance state. Physical mechanism based on the oxygen diffusion scenario, explaining such behavior, is discussed.
△ Less
Submitted 11 April, 2012;
originally announced April 2012.
-
Direct creation of micro-domains with positive and negative surface potential on hydroxyapatite coatings
Authors:
T. Plecenik,
S. A. M. Tofail,
M. Gregor,
M. Zahoran,
M. Truchly,
F. Laffir,
T. Roch,
P. Durina,
M. Vargova,
G. Plesch,
P. Kus,
A. Plecenik
Abstract:
A method for the direct patterning of electrostatic potential at the surface of hydroxyapatite is presented here. Micro-domains of surface potential have been created on hydroxyapatite coatings by a 20 keV focused electron beam with minimal alterations of surface chemistry. The success of such approach has been confirmed by Kelvin Probe Force Microscopy measurements, which show that this method is…
▽ More
A method for the direct patterning of electrostatic potential at the surface of hydroxyapatite is presented here. Micro-domains of surface potential have been created on hydroxyapatite coatings by a 20 keV focused electron beam with minimal alterations of surface chemistry. The success of such approach has been confirmed by Kelvin Probe Force Microscopy measurements, which show that this method is capable of creating micron sized positive and negative local electrostatic potential. The shape and potential difference of these domains were found to depend on the dose of total injected charge from the electron beam as well as the speed with which such charge is injected.
△ Less
Submitted 22 March, 2011;
originally announced March 2011.
-
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
Authors:
The ATLAS Collaboration,
G. Aad,
E. Abat,
B. Abbott,
J. Abdallah,
A. A. Abdelalim,
A. Abdesselam,
O. Abdinov,
B. Abi,
M. Abolins,
H. Abramowicz,
B. S. Acharya,
D. L. Adams,
T. N. Addy,
C. Adorisio,
P. Adragna,
T. Adye,
J. A. Aguilar-Saavedra,
M. Aharrouche,
S. P. Ahlen,
F. Ahles,
A. Ahmad,
H. Ahmed,
G. Aielli,
T. Akdogan
, et al. (2587 additional authors not shown)
Abstract:
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on…
▽ More
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.
△ Less
Submitted 14 August, 2009; v1 submitted 28 December, 2008;
originally announced January 2009.
-
The experimental lifetime alpha-quantization of the 36 metastable elementary particle lifetimes
Authors:
Malcolm H. Mac Gregor
Abstract:
The fine structure constant alpha ~ 1/137 appears as a lifetime scaling factor for the 36 metastable (t > 10^-21 sec) elementary particles -- 34 hadrons and the mu and tau leptons. The hadrons divide into 24 long-lived unpaired-quark (UQ) and 3 short-lived paired-quark (PQ) ground states (the lowest-mass states for each u, d, s, c, b quark flavor combination), plus 7 excited states. The lifetime…
▽ More
The fine structure constant alpha ~ 1/137 appears as a lifetime scaling factor for the 36 metastable (t > 10^-21 sec) elementary particles -- 34 hadrons and the mu and tau leptons. The hadrons divide into 24 long-lived unpaired-quark (UQ) and 3 short-lived paired-quark (PQ) ground states (the lowest-mass states for each u, d, s, c, b quark flavor combination), plus 7 excited states. The lifetime ratios include six factors of alpha, six factors of alpha^4, and one factor of alpha^3 (the leptons). This experimental lifetime alpha-quantization has seven salient features, where (1)-(3) show powers of alpha and (4)-(7) show smaller scaling effects): (1) A low-mass (m < 1 Gev) particle alpha-chain of linked alpha and alpha^4 lifetime ratios that extends from the neutron to the eta' meson and spans 11 powers of alpha. (2) Four unpaired-quark lifetime clusters (UQ)(pi, s, b, c) that contain 23 ground states which are sorted by the quark priorities c > b > s. (3) Four paired-quark clusters (PQ)(pi, s, b, c), and four alpha^4 pairing gaps between the fast PQ decays (which conserve flavor) and the slow UQ decays (which do not). (4) IR integer-ratio scaling inside UQ clusters, with integer lifetime ratios of 2, 3, or 4. (5) RP random perturbations that produce ~10% deviations from exact IR scaling. (6) Hadronic BC-scaling, which reflects the empirical BC = t(b)/t(c) ~ 3 lifetime ratios that occur between unpaired b-quark states and corresponding unpaired c-quark states. (7) Leptonic BC-scaling, shown in the lifetime equation (t(tau) x BC) / t(mu) = alpha^3, which is accurate to 2% for BC = 3.0, and which utilizes an alpha^3 scaling factor. The UQ and PQ lifetime clusters clearly reflect their u, d, s, c, b quark substructures
△ Less
Submitted 6 June, 2008;
originally announced June 2008.
-
Superconducting MgB2 thin films nano-bridges for cryo-electronic application
Authors:
M. Gregor,
R. Micunek,
T. Plecenik,
T. Roch,
A. Lugstein,
E. Bertagnolli,
I. Vavra,
M. Stefecka,
M. Kubinec,
M. Leporis,
V. Gasparik,
P. Kus,
A. Plecenik
Abstract:
Precursor MgB2 thin films were prepared on sapphire substrates by magnetron sputtering. Influence of ex-situ annealing process on superconducting MgB2 thin films roughness is discussed. Optimized annealing process of MgB precursor thin films in vacuum results in smooth superconducting MgB2 thin films with roughness below 10 nm, critical temperature Tcon = 31 K and transition width DTc less than…
▽ More
Precursor MgB2 thin films were prepared on sapphire substrates by magnetron sputtering. Influence of ex-situ annealing process on superconducting MgB2 thin films roughness is discussed. Optimized annealing process of MgB precursor thin films in vacuum results in smooth superconducting MgB2 thin films with roughness below 10 nm, critical temperature Tcon = 31 K and transition width DTc less than 1 K. Nano-bridges based on the superconducting MgB2 thin films using optical and Focused Ion Beam lithography were prepared. Critical current density jc (4.2 K) measured on 50 nm wide strip was 7.3x106 A/cm2 and no significant loss of superconducting properties was detected. Resistance vs. temperature and critical current vs. temperature characteristics were measured on these structures using standard DC four probe measurements.
△ Less
Submitted 29 May, 2007;
originally announced May 2007.
-
MgB2 radio-frequency superconducting quantum interference device prepared by atomic force microscope lithography
Authors:
M. Gregor,
T. Plecenik,
M. Prascak,
R. Micunek,
M. Kubinec,
V. Gasparik,
M. Grajcar,
P. Kus,
A. Plecenik
Abstract:
A new method of preparation of radio-frequency superconducting quantum interference devices on MgB2 thin films is presented. The variable-thickness bridge was prepared by a combination of optical lithography and of the scratching by an atomic force microscope. The critical current of the nanobridge was 0.35 uA at 4.2 K. Non-contact measurements of the current-phase characteristics and of the cri…
▽ More
A new method of preparation of radio-frequency superconducting quantum interference devices on MgB2 thin films is presented. The variable-thickness bridge was prepared by a combination of optical lithography and of the scratching by an atomic force microscope. The critical current of the nanobridge was 0.35 uA at 4.2 K. Non-contact measurements of the current-phase characteristics and of the critical current vs. temperature have been investigated on our structures.
△ Less
Submitted 23 August, 2007; v1 submitted 29 May, 2007;
originally announced May 2007.
-
A "Muon Mass Tree" with alpha-quantized Lepton, Quark and Hadron Masses
Authors:
Malcolm H. Mac Gregor
Abstract:
A "muon mass tree" is displayed that contains the excitation systematics for accurately reproducing the masses of the six Standard Model quarks (u,d,s,c,b,t); the heavy leptons; the proton; the phi, J/Psi and Upsilon vector meson thrshold states; the Bc meson; and the mass-averaged W and Z gauge bosons, using a unified mass formalism based on the electron ground state. Multiples of an alpha-quan…
▽ More
A "muon mass tree" is displayed that contains the excitation systematics for accurately reproducing the masses of the six Standard Model quarks (u,d,s,c,b,t); the heavy leptons; the proton; the phi, J/Psi and Upsilon vector meson thrshold states; the Bc meson; and the mass-averaged W and Z gauge bosons, using a unified mass formalism based on the electron ground state. Multiples of an alpha-quantized 105.04 MeV fermion mass quantum reproduce the states below 12 GeV, and multiples of a doubly-alpha-quantized 14,394 Mev fermion mass quantum reproduce the W-Z and t states above 12 GeV, where alpha ~ 1/137 is the fine structure constant. Masses are additive, and the overall mass accuracy for these states is in the 1% range. A similar "pion mass tree" based on an alpha-quantized 70.03 MeV boson mass quantum accurately reproduces the pseudoscalar meson masses. The mass alpha-quantization follows from a corresponding experimental alpha-spacing of the long-lived particle lifetimes, which occur in well-defined lifetime groups that are each determined by a dominant Standard Model quark substate.
△ Less
Submitted 20 July, 2006;
originally announced July 2006.
-
The top quark to electron mass ratio m(t) = 18*m(e)/alpha^2 where alpha = e^2/hslash*c
Authors:
Malcolm H. Mac Gregor
Abstract:
Threshold-state elementary particle lifetimes exhibit a scaling in powers of alpha = e^2/hslash*c, and a reciprocal electron-based 1/alpha scaling in particle masses that extends over two powers of 1/alpha. The m(e)/alpha coupling generates accurate q = (u,d), s, c, b quark masses for particles up to 11 GeV. The m(e)/alpha^2 coupling creates the "alpha-quarks" q^alpha = q/alpha that reproduce th…
▽ More
Threshold-state elementary particle lifetimes exhibit a scaling in powers of alpha = e^2/hslash*c, and a reciprocal electron-based 1/alpha scaling in particle masses that extends over two powers of 1/alpha. The m(e)/alpha coupling generates accurate q = (u,d), s, c, b quark masses for particles up to 11 GeV. The m(e)/alpha^2 coupling creates the "alpha-quarks" q^alpha = q/alpha that reproduce the top quark mass and average W^+-, Z^0 doublet mass. The calculated Bc mass is 6303.3 MeV/c^2, and the lattice QCD value is 6304 +- 12 MeV/c^2. The calculated and experimental top quark masses are m(t)calc = 18*m(e)/alpha^2 = 172.73 GeV/c^2 and m(t)exp = 172.5 +- 2.3 GeV/c^2.
△ Less
Submitted 23 March, 2006;
originally announced March 2006.
-
Electron generation of leptons and hadrons with reciprocal alpha-quantized lifetimes and masses
Authors:
Malcolm H. Mac Gregor
Abstract:
Hadron elementary particle measurements have long revealed an alpha-dependence in the long-lived threshold-state lifetimes, together with an alpha-related mass structure, where alpha ~ 1/137 is the fine structure constant. A detailed lifetime analysis shows that of the 156 particles with well-determined lifetimes, the 120 shortest lifetimes have a continuum of values, but the 36 longer lifetimes…
▽ More
Hadron elementary particle measurements have long revealed an alpha-dependence in the long-lived threshold-state lifetimes, together with an alpha-related mass structure, where alpha ~ 1/137 is the fine structure constant. A detailed lifetime analysis shows that of the 156 particles with well-determined lifetimes, the 120 shortest lifetimes have a continuum of values, but the 36 longer lifetimes occur in alpha-spaced groups which are sorted into s, c, b quark flavors. Guided by these lifetime results, we deduce an alpha-generated set of universal mass quanta, based on the electron ground state, which apply to both leptons and hadrons. A low-mass "threshold-state octet" of particles - muon, proton, tau, pion, eta, eta prime, kaon, phi meson - is reproduced to an average mass accuracy of 0.4%, with no adjustable parameters except a small hadronic binding energy. Without the lepton states, the hadron mass pattern is difficult to ascertain.
△ Less
Submitted 3 June, 2005;
originally announced June 2005.