-
Rheological signatures of a glass-glass transition in an aging colloidal clay
Authors:
Roberta Angelini,
Domenico Larobina,
Barbara Ruzicka,
Francesco Greco,
Raffaele Pastore
Abstract:
The occurrence of non-equilibrium transitions between arrested states has recently emerged as an intriguing issue in the field of soft glassy materials. The existence of one such transition has been suggested for aging colloidal clays (Laponite$^{\circledR}$ suspensions) at weight concentration 3.0%, although further experimental evidences are necessary to validate this scenario. Here, we test the…
▽ More
The occurrence of non-equilibrium transitions between arrested states has recently emerged as an intriguing issue in the field of soft glassy materials. The existence of one such transition has been suggested for aging colloidal clays (Laponite$^{\circledR}$ suspensions) at weight concentration 3.0%, although further experimental evidences are necessary to validate this scenario. Here, we test the occurrence of this transition for spontaneously aged (non-rejuvenated) samples, by exploiting the rheological tools of Dynamical Mechanical Analysis. On imposing consecutive compression cycles to differently aged clay suspensions, we find that a quite abrupt change of rheological parameters occurs for ages around three days. For the Young and elastic moduli, the change with the waiting time is essentially independent from the deformation rate, whereas other "fluid-like" properties, such as the loss modulus, do clearly display some rate dependence. We also show that the crossover identified by rheology coincides with deviations of the relaxation time (obtained through X-Ray Photon Correlation Spectroscopy) from its expected monotonic increase with aging. Thus, our results robustly support the existence of a glass-glass transition in aging colloidal clays, highlighting characteristic features of of their viscoelastic behaviour.
△ Less
Submitted 11 October, 2023;
originally announced October 2023.
-
Towards a Novel Ultrasound System Based on Low-Frequency Feature Extraction From a Fully-Printed Flexible Transducer
Authors:
Marco Giordano,
Kirill Keller,
Francesco Greco,
Luca Benini,
Michele Magno,
Christoph Leitner
Abstract:
Ultrasound is a key technology in healthcare, and it is being explored for non-invasive, wearable, continuous monitoring of vital signs. However, its widespread adoption in this scenario is still hindered by the size, complexity, and power consumption of current devices. Moreover, such an application demands adaptability to human anatomy, which is hard to achieve with current transducer technology…
▽ More
Ultrasound is a key technology in healthcare, and it is being explored for non-invasive, wearable, continuous monitoring of vital signs. However, its widespread adoption in this scenario is still hindered by the size, complexity, and power consumption of current devices. Moreover, such an application demands adaptability to human anatomy, which is hard to achieve with current transducer technology. This paper presents a novel ultrasound system prototype based on a fully printed, lead-free, and flexible polymer ultrasound transducer, whose bending radius promises good adaptability to the human anatomy. Our application scenario focuses on continuous blood flow monitoring. We implemented a hardware envelope filter to efficiently transpose high-frequency ultrasound signals to a lower-frequency spectrum. This reduces computational and power demands with little to no degradation in the task proposed for this work. We validated our method on a setup that mimics human blood flow by using a flow phantom and a peristaltic pump simulating 3 different heartbeat rhythms: 60, 90 and 120 beats per minute. Our ultrasound setup reconstructs peristaltic pump frequencies with errors of less than 0.05 Hz (3 bpm) from the set pump frequency, both for the raw echo and the enveloped echo. The analog pre-processing showed a promising reduction of signal bandwidth of more than 6x: pulse-echo signals of transducers excited at 12.5 MHz were reduced to about 2 MHz. Thus, allowing consumer MCUs to acquire and elaborate signals within mW-power range in an inexpensive fashion.
△ Less
Submitted 25 September, 2023;
originally announced September 2023.
-
Optical taxonomic signal
Authors:
Frank A. Greco
Abstract:
Scattering of light by biological tissue has hindered applications of spectroscopy to medical diagnosis. We describe here a combination of feature selection techniques and several discriminant statistics that may mitigate this problem. In the particular case of spectroscopy, a useful feature should have linewidth, which in practice means that the discriminant statistic should have significant valu…
▽ More
Scattering of light by biological tissue has hindered applications of spectroscopy to medical diagnosis. We describe here a combination of feature selection techniques and several discriminant statistics that may mitigate this problem. In the particular case of spectroscopy, a useful feature should have linewidth, which in practice means that the discriminant statistic should have significant values on several contiguous pixels of the detector. We also suggest a definition for optical taxonomic signal as a measure of how efficacious a particular combination may be and how much other variables such as source-detector separation and fiber width may affect discrimination.
△ Less
Submitted 17 May, 2024; v1 submitted 18 July, 2023;
originally announced July 2023.
-
Topology optimization of flexoelectric metamaterials with apparent piezoelectricity
Authors:
Francesco Greco,
David Codony,
Hossein Mohammadi,
Sonia Fernandez-Mendez,
Irene Arias
Abstract:
The flexoelectric effect, coupling polarization and strain gradient as well as strain and electric field gradients, is universal to dielectrics, but, as compared to piezoelectricity, it is more difficult to harness as it requires field gradients and it is a small-scale effect. These drawbacks can be overcome by suitably designing metamaterials made of a non-piezoelectric base material but exhibiti…
▽ More
The flexoelectric effect, coupling polarization and strain gradient as well as strain and electric field gradients, is universal to dielectrics, but, as compared to piezoelectricity, it is more difficult to harness as it requires field gradients and it is a small-scale effect. These drawbacks can be overcome by suitably designing metamaterials made of a non-piezoelectric base material but exhibiting apparent piezoelectricity. We develop a theoretical and computational framework to perform topology optimization of the representative volume element of such metamaterials by accurately modeling the governing equations of flexoelectricity using a Cartesian B-spline method, describing geometry with a level set, and resorting to genetic algorithms for optimization. We consider a multi-objective optimization problem where area fraction competes with four fundamental piezoelectric functionalities (stress/strain sensor/ actuator). We computationally obtain Pareto fronts, and discuss the different geometries depending on the apparent piezoelectric coefficient being optimized. In general, we find competitive estimations of apparent piezoelectricity as compared to reference materials such as quartz and PZT ceramics. This opens the possibility to design devices for sensing, actuation and energy harvesting from a much wider, cheaper and effective class of materials.
△ Less
Submitted 3 November, 2023; v1 submitted 14 March, 2023;
originally announced March 2023.
-
Supercooled liquids are Fickian yet non-Gaussian
Authors:
Francesco Rusciano,
Raffaele Pastore,
Francesco Greco
Abstract:
Reply to "Comment on 'Fickian non-Gaussian diffusion in glass-forming liquids' ".
In [ArXiv:2210.07119v1], Berthier et al. questioned the findings of our letter [Phys. Rev. Lett. 128, 168001 (2022)], concerning the existence and the features of Fickian non-Gaussian diffusion in glass-forming liquids. Here we demonstrate that their arguments are either wrong, or not meaningful to our scope. Thus,…
▽ More
Reply to "Comment on 'Fickian non-Gaussian diffusion in glass-forming liquids' ".
In [ArXiv:2210.07119v1], Berthier et al. questioned the findings of our letter [Phys. Rev. Lett. 128, 168001 (2022)], concerning the existence and the features of Fickian non-Gaussian diffusion in glass-forming liquids. Here we demonstrate that their arguments are either wrong, or not meaningful to our scope. Thus, we fully confirm the validity and novelty of our results.
△ Less
Submitted 19 December, 2022;
originally announced December 2022.
-
Design and Structure Dependent Priors for Scale Parameters in Latent Gaussian Models
Authors:
Aldo Gardini,
Fedele Greco,
Carlo Trivisano
Abstract:
Many common correlation structures assumed for data can be described through latent Gaussian models. When Bayesian inference is carried out, it is required to set the prior distribution for scale parameters that rules the model components, possibly allowing to incorporate prior information. This task is particularly delicate and many contributions in the literature are devoted to investigating suc…
▽ More
Many common correlation structures assumed for data can be described through latent Gaussian models. When Bayesian inference is carried out, it is required to set the prior distribution for scale parameters that rules the model components, possibly allowing to incorporate prior information. This task is particularly delicate and many contributions in the literature are devoted to investigating such aspects. We focus on the fact that the scale parameter controls the prior variability of the model component in a complex way since its dispersion is also affected by the correlation structure and the design. To overcome this issue that might confound the prior elicitation step, we propose to let the user specify the marginal prior of a measure of dispersion of the model component, integrating out the scale parameter, the structure and the design. Then, we analytically derive the implied prior for the scale parameter. Results from a simulation study, aimed at showing the behavior of the estimators sampling properties under the proposed prior elicitation strategy, are discussed. Lastly, some real data applications are explored to investigate prior sensitivity and allocation of explained variance among model components.
△ Less
Submitted 19 December, 2022;
originally announced December 2022.
-
The language and social behavior of innovators
Authors:
A. Fronzetti Colladon,
L. Toschi,
E. Ughetto,
F. Greco
Abstract:
Innovators are creative people who can conjure the ground-breaking ideas that represent the main engine of innovative organizations. Past research has extensively investigated who innovators are and how they behave in work-related activities. In this paper, we suggest that it is necessary to analyze how innovators behave in other contexts, such as in informal communication spaces, where knowledge…
▽ More
Innovators are creative people who can conjure the ground-breaking ideas that represent the main engine of innovative organizations. Past research has extensively investigated who innovators are and how they behave in work-related activities. In this paper, we suggest that it is necessary to analyze how innovators behave in other contexts, such as in informal communication spaces, where knowledge is shared without formal structure, rules, and work obligations. Drawing on communication and network theory, we analyze about 38,000 posts available in the intranet forum of a large multinational company. From this, we explain how innovators differ from other employees in terms of social network behavior and language characteristics. Through text mining, we find that innovators write more, use a more complex language, introduce new concepts/ideas, and use positive but factual-based language. Understanding how innovators behave and communicate can support the decision-making processes of managers who want to foster innovation.
△ Less
Submitted 20 September, 2022;
originally announced September 2022.
-
SENSATION: An Authoring Tool to Support Event-State Paradigm in End-User Development
Authors:
Giuseppe Desolda,
Francesco Greco,
Francisco Guarnieri,
Nicole Mariz,
Massimo Zancanaro
Abstract:
In this paper, we present the design and the evaluation of an authoring tool for End-User Development, which supports the definition of Trigger-Actions rules that combines events and states in the triggers. The possibility of using either states or events in triggers has already been discussed in the literature. However, it is recognized that the state/event distinction is difficult to manage for…
▽ More
In this paper, we present the design and the evaluation of an authoring tool for End-User Development, which supports the definition of Trigger-Actions rules that combines events and states in the triggers. The possibility of using either states or events in triggers has already been discussed in the literature. However, it is recognized that the state/event distinction is difficult to manage for users. In this paper, we propose an authoring tool that provides explicit support for managing this distinction. We compare it with a state-of-the-art authoring tool that implements the classical event-event paradigm.
△ Less
Submitted 6 September, 2021;
originally announced September 2021.
-
A multiscale analysis of instability-induced failure mechanisms in fiber-reinforced composite structures via alternative modeling approaches
Authors:
Fabrizio Greco,
Lorenzo Leonetti,
Paolo Lonetti,
Raimondo Luciano,
Andrea Pranno
Abstract:
Multiscale techniques have been widely shown to potentially overcome the limitation of homogenization schemes in representing the microscopic failure mechanisms in heterogeneous media as well as their influence on their structural response at the macroscopic level. Such techniques allow the use of fully detailed models to be avoided, thus resulting in a notable decrease in the overall computationa…
▽ More
Multiscale techniques have been widely shown to potentially overcome the limitation of homogenization schemes in representing the microscopic failure mechanisms in heterogeneous media as well as their influence on their structural response at the macroscopic level. Such techniques allow the use of fully detailed models to be avoided, thus resulting in a notable decrease in the overall computational cost at fixed numerical accuracy compared to the so-called direct numerical simulations. In the present work, two different multiscale modeling approaches are presented for the analysis of microstructural instability-induced failure in locally periodic fiber-reinforced composite materials subjected to general loading conditions involving large deformations. The first approach, which is of a semi-concurrent kind, consists in the on-the-fly derivation of the macroscopic constitutive response of the composite structure together with its microscopic stability properties through a two-way computational homogenization scheme. The latter one is a novel hybrid hierarchical-concurrent multiscale approach relying on a two-level domain decomposition scheme used in conjunction with a nonlinear homogenization scheme performed at the preprocessing stage. Both multiscale approaches have been suitably validated through comparisons with reference direct numerical simulations, by which the ability of the latter approach in capturing boundary layer effects has been demonstrated.
△ Less
Submitted 28 July, 2021;
originally announced August 2021.
-
Gamma-matrices: a new class of simultaneously diagonalizable matrices
Authors:
Antonio Boccuto,
Ivan Gerace,
Valentina Giorgetti,
Federico Greco
Abstract:
In order to precondition Toeplitz systems, we present a new class of simultaneously diagonalizable real matrices, the Gamma-matrices, which include both symmetric circulant matrices and a subclass of the set of all reverse circulant matrices. We define some algorithms for fast computation of the product between a Gamma-matrix and a real vector and between two Gamma-matrices. Moreover, we illustrat…
▽ More
In order to precondition Toeplitz systems, we present a new class of simultaneously diagonalizable real matrices, the Gamma-matrices, which include both symmetric circulant matrices and a subclass of the set of all reverse circulant matrices. We define some algorithms for fast computation of the product between a Gamma-matrix and a real vector and between two Gamma-matrices. Moreover, we illustrate a technique of approximating a real symmetric Toeplitz matrix by a Gamma-matrix, and we show that the eigenvalues of the preconditioned matrix are clustered around zero with the exception of at most a finite number of terms.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.
-
Toward the use of temporary tattoo electrodes for impedancemetric respiration monitoring and other electrophysiological recordings
Authors:
Silvia Taccola,
Aliria Poliziani,
Daniele Santonocito,
Alessio Mondini,
Christian Denk,
Alessandro Noriaki Ide,
Markus Oberparleiter,
Francesco Greco,
Virgilio Mattoli
Abstract:
Development of dry, ultra-conformable and unperceivable temporary tattoo electrodes (TTEs), based on the ink-jet printing of PEDOT:PSS on top of commercially available temporary tattoo paper, has gained increasing attention as a new and promising technology for electrophysiological recordings on skin. In this work we present a TTEs epidermal sensor for real time monitoring of respiration through t…
▽ More
Development of dry, ultra-conformable and unperceivable temporary tattoo electrodes (TTEs), based on the ink-jet printing of PEDOT:PSS on top of commercially available temporary tattoo paper, has gained increasing attention as a new and promising technology for electrophysiological recordings on skin. In this work we present a TTEs epidermal sensor for real time monitoring of respiration through transthoracic impedance measurements, exploiting a new design based on the application of soft screen printed Ag ink and magnetic interlink, that guarantees a repositionable, long term stable and robust interconnection of TTEs with external docking devices. The efficiency of the TTE and the proposed interconnection strategy under stretching (up to 10%) and over time (up to 96 hours) has been verified on a dedicated experimental setup and on humans, fulfilling the proposed specific application of transthoracic impedance measurements. The proposed approach makes this technology suitable for large-scale production and suitable not only for the specific use case presented, but also for real time monitoring of different bio-electric signals, as demonstrated through specific proof of concept demonstrators.
△ Less
Submitted 24 December, 2020;
originally announced December 2020.
-
High-order maximum-entropy collocation methods
Authors:
F. Greco,
M. Arroyo
Abstract:
This paper considers the approximation of partial differential equations with a point collocation framework based on high-order local maximum-entropy schemes (HOLMES). In this approach, smooth basis functions are computed through an optimization procedure and the strong form of the problem is directly imposed at the collocation points, reducing significantly the computational times with respect to…
▽ More
This paper considers the approximation of partial differential equations with a point collocation framework based on high-order local maximum-entropy schemes (HOLMES). In this approach, smooth basis functions are computed through an optimization procedure and the strong form of the problem is directly imposed at the collocation points, reducing significantly the computational times with respect to the Galerkin formulation. Furthermore, such a method is truly meshless, since no background integration grids are necessary. The validity of the proposed methodology is verified with supportive numerical examples, where the expected convergence rates are obtained. This includes the approximation of PDEs on domains bounded by implicit and explicit (NURBS) curves, illustrating a direct integration between the geometric modeling and the numerical analysis.
△ Less
Submitted 30 October, 2020; v1 submitted 26 October, 2020;
originally announced October 2020.
-
Concentrated suspensions of Brownian beads in water: dynamic heterogeneities trough a simple experimental technique
Authors:
Raffaele Pastore,
Marco Caggioni,
Domenico Larobina,
Luigi Santamaria Amato,
Francesco Greco
Abstract:
Concentrated suspensions of Brownian hard-spheres in water are an epitome for understanding the glassy dynamics of both soft materials and supercooled molecular liquids. From an experimental point of view, such systems are especially suited to perform particle tracking easily, and, therefore, are a benchmark for novel optical techniques, applicable when primary particles cannot be resolved. Differ…
▽ More
Concentrated suspensions of Brownian hard-spheres in water are an epitome for understanding the glassy dynamics of both soft materials and supercooled molecular liquids. From an experimental point of view, such systems are especially suited to perform particle tracking easily, and, therefore, are a benchmark for novel optical techniques, applicable when primary particles cannot be resolved. Differential Variance Analysis (DVA) is one such novel technique that simplifies significantly the characterization of structural relaxation processes of soft glassy materials, since it is directly applicable to digital image sequences of the sample. DVA succeeds in monitoring not only the average dynamics, but also its spatio-temporal fluctuations, known as dynamic heterogeneities. In this work, we study the dynamics of dense suspensions of Brownian beads in water, imaged through digital video-microscopy, by using both DVA and single-particle tracking. We focus on two commonly used signatures of dynamic heterogeneities: the dynamic susceptibility, $χ_4$, and the non-Gaussian parameter, $α_2$. By direct comparison of these two quantities, we are able to highlight similarities and differences. We do confirm that $χ_4$ and $α_2$ provide qualitatively similar information, but we find quantitative discrepancies in the scalings of characteristic time and length scale on approaching the glass transition.
△ Less
Submitted 3 April, 2019;
originally announced April 2019.
-
Ultra-Conformable Free-Standing Capacitors Based on Ultrathin Polyvinyl Formal Films
Authors:
Jonathan Barsotti,
Ikue Hirata,
Francesca Pignatelli,
Mario Caironi,
Francesco Greco,
Virgilio Mattoli
Abstract:
Conformable Electronics refers to a class of electronic devices that have the ability to conformally adhere onto non-planar surfaces and materials, resulting particularly appealing for skin applications, such as the case of skin-worn unobtrusive (bio)sensors for healthcare monitoring. Conformability can be addressed by integrating basic electronic components on ultrathin polymeric film substrates.…
▽ More
Conformable Electronics refers to a class of electronic devices that have the ability to conformally adhere onto non-planar surfaces and materials, resulting particularly appealing for skin applications, such as the case of skin-worn unobtrusive (bio)sensors for healthcare monitoring. Conformability can be addressed by integrating basic electronic components on ultrathin polymeric film substrates. Among other basic electronic components, capacitors are fundamental ones for energy storage, sensing, frequency tuning, impedance adaptation and signal processing. In this work we present a novel approach for conformable capacitors based on a free-standing, ultrathin and ultra-conformable nanosheets of poly (vinyl formal) (PVF), which serve both as structural and dielectric component of the capacitor. A novel fabrication approach is proposed and applied to fully free-standing ultrathin capacitors fabrication, having an overall thickness as low as 200 nm; that represents, to the best of our knowledge, the thinnest free-standing capacitors ever reported. Thanks to the ultra-low thickness, the proposed capacitors are able to sustain flexure to extremely small curvature radii (as low as 1.5 μm) and to conform to complex surfaces, such as a nylon mesh with micrometric texture without compromising their operation.
△ Less
Submitted 9 August, 2018;
originally announced August 2018.
-
Tattoo-Paper Transfer as a Versatile Platform for All-Printed Organic Edible Electronics
Authors:
Giorgio E. Bonacchini,
Caterina Bossio,
Francesco Greco,
Virgilio Mattoli,
Yun-Hi Kim,
Guglielmo Lanzani,
Mario Caironi
Abstract:
The use of natural or bioinspired materials to develop edible electronic devices is a potentially disruptive technology that can boost point-of-care testing. The technology exploits devices which can be safely ingested, along with pills or even food, and operated from within the gastrointestinal tract. Ingestible electronics could potentially target a significant number of biomedical applications,…
▽ More
The use of natural or bioinspired materials to develop edible electronic devices is a potentially disruptive technology that can boost point-of-care testing. The technology exploits devices which can be safely ingested, along with pills or even food, and operated from within the gastrointestinal tract. Ingestible electronics could potentially target a significant number of biomedical applications, both as therapeutic and diagnostic tool, and this technology may also impact the food industry, by providing ingestible or food-compatible electronic tags that can smart track goods and monitor their quality along the distribution chain. We hereby propose temporary tattoo-paper as a simple and versatile platform for the integration of electronics onto food and pharmaceutical capsules. In particular, we demonstrate the fabrication of all-printed Organic Field-Effect Transistors (OFETs) on untreated commercial tattoo-paper, and their subsequent transfer and operation on edible substrates with a complex non-planar geometry.
△ Less
Submitted 1 February, 2018;
originally announced February 2018.
-
P-spline smoothing for spatial data collected worldwide
Authors:
Fedele Greco,
Massimo Ventrucci,
Elisa Castelli
Abstract:
Spatial data collected worldwide at a huge number of locations are frequently used in environmental and climate studies. Spatial modelling for this type of data presents both methodological and computational challenges. In this work we illustrate a computationally efficient non parametric framework to model and estimate the spatial field while accounting for geodesic distances between locations. T…
▽ More
Spatial data collected worldwide at a huge number of locations are frequently used in environmental and climate studies. Spatial modelling for this type of data presents both methodological and computational challenges. In this work we illustrate a computationally efficient non parametric framework to model and estimate the spatial field while accounting for geodesic distances between locations. The spatial field is modelled via penalized splines (P-splines) using intrinsic Gaussian Markov Random Field (GMRF) priors for the spline coefficients. The key idea is to use the sphere as a surrogate for the Globe, then build the basis of B-spline functions on a geodesic grid system. The basis matrix is sparse and so is the precision matrix of the GMRF prior, thus computational efficiency is gained by construction. We illustrate the approach on a real climate study, where the goal is to identify the Intertropical Convergence Zone using high-resolution remote sensing data.
△ Less
Submitted 15 November, 2017;
originally announced November 2017.
-
Exploring University Students' Engagement with Online Video Lectures in a Blended Introductory Mechanics Course
Authors:
Shih-Yin Lin,
John M. Aiken,
Daniel T. Seaton,
Scott S. Douglas,
Edwin F. Greco,
Brian D. Thoms,
Michael F. Schatz
Abstract:
The advent of MOOCs has stimulated interest in using online videos to deliver content in university courses. We examined student engagement with 78 online videos that we created and were incorporated into a one-semester blended introductory mechanics course at the Georgia Institute of Technology. We found that students were more engaged with videos that supported laboratory activities than with vi…
▽ More
The advent of MOOCs has stimulated interest in using online videos to deliver content in university courses. We examined student engagement with 78 online videos that we created and were incorporated into a one-semester blended introductory mechanics course at the Georgia Institute of Technology. We found that students were more engaged with videos that supported laboratory activities than with videos that presented lecture content. In particular, the percentage of students accessing laboratory videos was consistently greater than 80 percent throughout the semester while the percentage of students accessing lecture videos dropped to less than 40 percent by the end of the term. Moreover, students were more likely to access the entirety of a laboratory video than a lecture video. Our results suggest that students may access videos based on perceived value: students appear to consider the laboratory videos as essential for successfully completing the laboratories while students appear to consider the lecture videos as something more akin to supplementary material. We found there was little correlation between student engagement with the videos and the performance in the course. In addition, an examination of the in-video content suggests that students focus more on concrete information that is explicitly required for assignment completion (e.g., actions required to complete laboratory work, or formulas/mathematical expressions needed to solve particular problems) and less on content that is considered more conceptual in nature. The results of the study suggest ways in which instructors may revise courses to better support student learning.
△ Less
Submitted 10 March, 2016;
originally announced March 2016.
-
Peer Evaluation of Video Lab Reports in an Introductory Physics MOOC
Authors:
Shih-Yin Lin,
Scott S. Douglas,
John M. Aiken,
Chien-Lin Liu,
Edwin F. Greco,
Brian D. Thoms,
Marcos D. Caballero,
Michael F. Schatz
Abstract:
Assessing student performance becomes challenging when course enrollment becomes very large (~10^4 students). As part of a Massive Open Online Course (MOOC) in introductory physics offered by Georgia Tech in 2013, students submitted video reports on mechanics labs. Peer evaluation of these reports provided the primary method for evaluating student laboratory work. This paper describes the methods…
▽ More
Assessing student performance becomes challenging when course enrollment becomes very large (~10^4 students). As part of a Massive Open Online Course (MOOC) in introductory physics offered by Georgia Tech in 2013, students submitted video reports on mechanics labs. Peer evaluation of these reports provided the primary method for evaluating student laboratory work. This paper describes the methods developed and used to guide students in evaluating each other's video lab reports. We also discuss how students' peer evaluation behavior changed with different interventions provided in the course.
△ Less
Submitted 15 October, 2014; v1 submitted 17 July, 2014;
originally announced July 2014.
-
Peer Evaluation of Video Lab Reports in a Blended Introductory Physics Course
Authors:
Scott S. Douglas,
Shih-Yin Lin,
John M. Aiken,
Brian D. Thoms,
Edwin F. Greco,
Marcos D. Caballero,
Michael F. Schatz
Abstract:
The Georgia Tech blended introductory calculus-based mechanics course emphasizes scientific communication as one of its learning goals, and to that end, we gave our students a series of four peer-evaluation assignments intended to develop their abilities to present and evaluate scientific arguments. Within these assignments, we also assessed students' evaluation abilities by comparing their evalua…
▽ More
The Georgia Tech blended introductory calculus-based mechanics course emphasizes scientific communication as one of its learning goals, and to that end, we gave our students a series of four peer-evaluation assignments intended to develop their abilities to present and evaluate scientific arguments. Within these assignments, we also assessed students' evaluation abilities by comparing their evaluations to a set of expert evaluations. We summarize our development efforts and describe the changes we observed in student evaluation behavior.
△ Less
Submitted 14 October, 2014; v1 submitted 11 July, 2014;
originally announced July 2014.
-
Student Use of a Single Lecture Video in a Flipped Introductory Mechanics Course
Authors:
John M. Aiken,
Shih-Yin Lin,
Scott S. Douglas,
Edwin F. Greco,
Brian D. Thoms,
Marcos D. Caballero,
Michael F. Schatz
Abstract:
In the Fall of 2013, Georgia Tech offered a 'flipped' calculus-based introductory mechanics class as an alternative to the traditional large-enrollment lecture class. This class flipped instruction by introducing new material outside of the classroom through pre-recorded, lecture videos. Video lectures constituted students' initial introduction to course material. We analyze how students engaged w…
▽ More
In the Fall of 2013, Georgia Tech offered a 'flipped' calculus-based introductory mechanics class as an alternative to the traditional large-enrollment lecture class. This class flipped instruction by introducing new material outside of the classroom through pre-recorded, lecture videos. Video lectures constituted students' initial introduction to course material. We analyze how students engaged with online lecture videos via 'clickstream' data, consisting of time-stamped interactions (plays, pauses, seeks, etc.) with the online video player. Analysis of these events has shown that students may be focusing on elements of the video that facilitate a 'correct' solution.
△ Less
Submitted 22 September, 2014; v1 submitted 9 July, 2014;
originally announced July 2014.
-
Microrheology with Optical Tweezers: Measuring the solutions' relative viscosity at a glance
Authors:
Francesco Del Giudice,
Andrew Glidle,
Francesco Greco,
Paolo Antonio Netti,
Pier Luca Maffettone,
Jonathan M. Cooper,
Manlio Tassieri
Abstract:
We present a straightforward method for measuring the fluids' relative viscosity via a simple graphical analysis of the normalised position autocorrelation function of an optically trapped bead, without the need of embarking on laborious calculations. The advantages of the proposed microrheology method become evident, for instance, when it is adopted for measuring the molecular weight of rare or p…
▽ More
We present a straightforward method for measuring the fluids' relative viscosity via a simple graphical analysis of the normalised position autocorrelation function of an optically trapped bead, without the need of embarking on laborious calculations. The advantages of the proposed microrheology method become evident, for instance, when it is adopted for measuring the molecular weight of rare or precious materials by means of their intrinsic viscosity. The proposed method has been validated by direct comparison with conventional bulk rheology methods.
△ Less
Submitted 27 March, 2014; v1 submitted 26 March, 2014;
originally announced March 2014.
-
The Initial State of Students Taking an Introductory Physics MOOC
Authors:
John M. Aiken,
Shih-Yin Lin,
Scott S. Douglas,
Edwin F. Greco,
Brian D. Thoms,
Michael F. Schatz,
Marcos D. Caballero
Abstract:
As part of a larger research project into massively open online courses (MOOCs), we have investigated student background, as well as student participation in a physics MOOC with a laboratory component. Students completed a demographic survey and the Force and Motion Conceptual Evaluation at the beginning of the course. While the course is still actively running, we have tracked student participati…
▽ More
As part of a larger research project into massively open online courses (MOOCs), we have investigated student background, as well as student participation in a physics MOOC with a laboratory component. Students completed a demographic survey and the Force and Motion Conceptual Evaluation at the beginning of the course. While the course is still actively running, we have tracked student participation over the first five weeks of the eleven-week course.
△ Less
Submitted 13 September, 2013; v1 submitted 9 July, 2013;
originally announced July 2013.
-
Comparing large lecture mechanics curricula using the Force Concept Inventory: A five thousand student study
Authors:
Marcos D. Caballero,
Matthew A. Kohlmyer,
Edwin F. Greco,
Eric R. Murray,
Keith R. Bujak,
M. Jackson Marr,
Richard Catrambone,
Michael F. Schatz
Abstract:
The performance of over 5000 students in introductory calculus-based mechanics courses at the Georgia Institute of Technology was assessed using the Force Concept Inventory (FCI). Results from two different curricula were compared: a traditional mechanics curriculum and the Matter & Interactions (M&I) curriculum. Post-instruction FCI averages were significantly higher for the traditional curriculu…
▽ More
The performance of over 5000 students in introductory calculus-based mechanics courses at the Georgia Institute of Technology was assessed using the Force Concept Inventory (FCI). Results from two different curricula were compared: a traditional mechanics curriculum and the Matter & Interactions (M&I) curriculum. Post-instruction FCI averages were significantly higher for the traditional curriculum than for the M&I curriculum; the differences between curricula persist after accounting for factors such as pre-instruction FCI scores, grade point averages, and SAT scores. FCI performance on categories of items organized by concepts was also compared; traditional averages were significantly higher in each concept. We examined differences in student preparation between the curricula and found that the relative fraction of homework and lecture topics devoted to FCI force and motion concepts correlated with the observed performance differences. Limitations of concept inventories as instruments for evaluating curricular reforms are discussed.
△ Less
Submitted 3 July, 2012; v1 submitted 6 June, 2011;
originally announced June 2011.
-
The Padé iterations for the matrix sign function and their reciprocals are optimal
Authors:
Federico Greco,
Bruno Iannazzo,
Federico Poloni
Abstract:
It is proved that among the rational iterations locally converging with order s>1 to the sign function, the Padé iterations and their reciprocals are the unique rationals with the lowest sum of the degrees of numerator and denominator.
It is proved that among the rational iterations locally converging with order s>1 to the sign function, the Padé iterations and their reciprocals are the unique rationals with the lowest sum of the degrees of numerator and denominator.
△ Less
Submitted 13 November, 2011; v1 submitted 8 November, 2010;
originally announced November 2010.
-
Mechanical Properties of End-crosslinked Entangled Polymer Networks using Sliplink Brownian Dynamics Simulations
Authors:
Julian Oberdisse,
Giovanni Ianniruberto,
Francesco Greco,
Guiseppe Marrucci
Abstract:
The mechanical properties of a polymeric network containing both crosslinks and sliplinks (entanglements) are studied using a multi-chain Brownian dynamics simulation. We coarse-grain at the level of chain segments connecting consecutive nodes (cross- or sliplinks), with particular attention to the Gaussian statistics of the network. Affine displacement of nodes is not imposed: their displacemen…
▽ More
The mechanical properties of a polymeric network containing both crosslinks and sliplinks (entanglements) are studied using a multi-chain Brownian dynamics simulation. We coarse-grain at the level of chain segments connecting consecutive nodes (cross- or sliplinks), with particular attention to the Gaussian statistics of the network. Affine displacement of nodes is not imposed: their displacement as well as sliding of monomers through sliplinks is governed by force balances. The simulation results of stress in uniaxial extension and the full stress tensor in simple shear including the (non-zero) second normal stress difference are presented for monodisperse chains with up to 18 entanglements between two crosslinks. The cases of two different force laws of the subchains (Gaussian chains and chains with finite extensibility) for two different numbers of monomers in a subchain (no = 50 and no = 100) are examined. It is shown that the additivity assumption of slip- and crosslink contribution holds for sufficiently long chains with two or more entanglements, and that it can be used to construct the strain response of a network of infinitely long chains. An important consequence is that the contribution of sliplinks to the small-strain shear modulus is about ⅔ of the contribution of a crosslink.
△ Less
Submitted 20 February, 2006;
originally announced February 2006.
