Showing 1–50 of 54 results for author: Gray, L

Smart Pixels: In-pixel AI for on-sensor data filtering

Authors: Benjamin Parpillon, Chinar Syal, Jieun Yoo, Jennet Dickinson, Morris Swartz, Giuseppe Di Guglielmo, Alice Bean, Douglas Berry, Manuel Blanco Valentin, Karri DiPetrillo, Anthony Badea, Lindsey Gray, Petar Maksimovic, Corrinne Mills, Mark S. Neubauer, Gauri Pradhan, Nhan Tran, Dahai Wen, Farah Fahim

Abstract: We present a smart pixel prototype readout integrated circuit (ROIC) designed in CMOS 28 nm bulk process, with in-pixel implementation of an artificial intelligence (AI) / machine learning (ML) based data filtering algorithm designed as proof-of-principle for a Phase III upgrade at the Large Hadron Collider (LHC) pixel detector. The first version of the ROIC consists of two matrices of 256 smart p… ▽ More We present a smart pixel prototype readout integrated circuit (ROIC) designed in CMOS 28 nm bulk process, with in-pixel implementation of an artificial intelligence (AI) / machine learning (ML) based data filtering algorithm designed as proof-of-principle for a Phase III upgrade at the Large Hadron Collider (LHC) pixel detector. The first version of the ROIC consists of two matrices of 256 smart pixels, each 25$\times$25 $μ$m$^2$ in size. Each pixel consists of a charge-sensitive preamplifier with leakage current compensation and three auto-zero comparators for a 2-bit flash-type ADC. The frontend is capable of synchronously digitizing the sensor charge within 25 ns. Measurement results show an equivalent noise charge (ENC) of $\sim$30e$^-$ and a total dispersion of $\sim$100e$^-$ The second version of the ROIC uses a fully connected two-layer neural network (NN) to process information from a cluster of 256 pixels to determine if the pattern corresponds to highly desirable high-momentum particle tracks for selection and readout. The digital NN is embedded in-between analog signal processing regions of the 256 pixels without increasing the pixel size and is implemented as fully combinatorial digital logic to minimize power consumption and eliminate clock distribution, and is active only in the presence of an input signal. The total power consumption of the neural network is $\sim$ 300 $μ$W. The NN performs momentum classification based on the generated cluster patterns and even with a modest momentum threshold, it is capable of 54.4\% - 75.4\% total data rejection, opening the possibility of using the pixel information at 40MHz for the trigger. The total power consumption of analog and digital functions per pixel is $\sim$ 6 $μ$W per pixel, which corresponds to $\sim$ 1 W/cm$^2$ staying within the experimental constraints. △ Less

Submitted 21 June, 2024; originally announced June 2024.

Comments: IEEE NSS MIC RSTD 2024

Report number: FERMILAB-CONF-24-0233-ETD

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, B. Acar, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. AlKadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 30 June, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Comments: Prepared for submission to JINST

Participation in the age of foundation models

Authors: Harini Suresh, Emily Tseng, Meg Young, Mary L. Gray, Emma Pierson, Karen Levy

Abstract: Growing interest and investment in the capabilities of foundation models has positioned such systems to impact a wide array of public services. Alongside these opportunities is the risk that these systems reify existing power imbalances and cause disproportionate harm to marginalized communities. Participatory approaches hold promise to instead lend agency and decision-making power to marginalized… ▽ More Growing interest and investment in the capabilities of foundation models has positioned such systems to impact a wide array of public services. Alongside these opportunities is the risk that these systems reify existing power imbalances and cause disproportionate harm to marginalized communities. Participatory approaches hold promise to instead lend agency and decision-making power to marginalized stakeholders. But existing approaches in participatory AI/ML are typically deeply grounded in context - how do we apply these approaches to foundation models, which are, by design, disconnected from context? Our paper interrogates this question. First, we examine existing attempts at incorporating participation into foundation models. We highlight the tension between participation and scale, demonstrating that it is intractable for impacted communities to meaningfully shape a foundation model that is intended to be universally applicable. In response, we develop a blueprint for participatory foundation models that identifies more local, application-oriented opportunities for meaningful participation. In addition to the "foundation" layer, our framework proposes the "subfloor'' layer, in which stakeholders develop shared technical infrastructure, norms and governance for a grounded domain, and the "surface'' layer, in which affected communities shape the use of a foundation model for a specific downstream task. The intermediate "subfloor'' layer scopes the range of potential harms to consider, and affords communities more concrete avenues for deliberation and intervention. At the same time, it avoids duplicative effort by scaling input across relevant use cases. Through three case studies in clinical care, financial services, and journalism, we illustrate how this multi-layer model can create more meaningful opportunities for participation than solely intervening at the foundation layer. △ Less

Submitted 29 May, 2024; originally announced May 2024.

Comments: 13 pages, 2 figures. Appeared at FAccT '24

Journal ref: In The 2024 ACM Conference on Fairness, Accountability, and Transparency (FAccT '24), June 3-6, 2024, Rio de Janeiro, Brazil. ACM, New York, NY, USA, 13 pages

Multi-view Disparity Estimation Using a Novel Gradient Consistency Model

Authors: James L. Gray, Aous T. Naman, David S. Taubman

Abstract: Variational approaches to disparity estimation typically use a linearised brightness constancy constraint, which only applies in smooth regions and over small distances. Accordingly, current variational approaches rely on a schedule to progressively include image data. This paper proposes the use of Gradient Consistency information to assess the validity of the linearisation; this information is u… ▽ More Variational approaches to disparity estimation typically use a linearised brightness constancy constraint, which only applies in smooth regions and over small distances. Accordingly, current variational approaches rely on a schedule to progressively include image data. This paper proposes the use of Gradient Consistency information to assess the validity of the linearisation; this information is used to determine the weights applied to the data term as part of an analytically inspired Gradient Consistency Model. The Gradient Consistency Model penalises the data term for view pairs that have a mismatch between the spatial gradients in the source view and the spatial gradients in the target view. Instead of relying on a tuned or learned schedule, the Gradient Consistency Model is self-scheduling, since the weights evolve as the algorithm progresses. We show that the Gradient Consistency Model outperforms standard coarse-to-fine schemes and the recently proposed progressive inclusion of views approach in both rate of convergence and accuracy. △ Less

Submitted 27 May, 2024; originally announced May 2024.

Comments: 11 pages, 11 figures. Submitted to Transactions on Image Processing

Analysis Facilities White Paper

Authors: D. Ciangottini, A. Forti, L. Heinrich, N. Skidmore, C. Alpigiani, M. Aly, D. Benjamin, B. Bockelman, L. Bryant, J. Catmore, M. D'Alfonso, A. Delgado Peris, C. Doglioni, G. Duckeck, P. Elmer, J. Eschle, M. Feickert, J. Frost, R. Gardner, V. Garonne, M. Giffels, J. Gooding, E. Gramstad, L. Gray, B. Hegner , et al. (41 additional authors not shown)

Abstract: This white paper presents the current status of the R&D for Analysis Facilities (AFs) and attempts to summarize the views on the future direction of these facilities. These views have been collected through the High Energy Physics (HEP) Software Foundation's (HSF) Analysis Facilities forum, established in March 2022, the Analysis Ecosystems II workshop, that took place in May 2022, and the WLCG/HS… ▽ More This white paper presents the current status of the R&D for Analysis Facilities (AFs) and attempts to summarize the views on the future direction of these facilities. These views have been collected through the High Energy Physics (HEP) Software Foundation's (HSF) Analysis Facilities forum, established in March 2022, the Analysis Ecosystems II workshop, that took place in May 2022, and the WLCG/HSF pre-CHEP workshop, that took place in May 2023. The paper attempts to cover all the aspects of an analysis facility. △ Less

Submitted 15 April, 2024; v1 submitted 2 April, 2024; originally announced April 2024.

Smartpixels: Towards on-sensor inference of charged particle track parameters and uncertainties

Authors: Jennet Dickinson, Rachel Kovach-Fuentes, Lindsey Gray, Morris Swartz, Giuseppe Di Guglielmo, Alice Bean, Doug Berry, Manuel Blanco Valentin, Karri DiPetrillo, Farah Fahim, James Hirschauer, Shruti R. Kulkarni, Ron Lipton, Petar Maksimovic, Corrinne Mills, Mark S. Neubauer, Benjamin Parpillon, Gauri Pradhan, Chinar Syal, Nhan Tran, Dahai Wen, Jieun Yoo, Aaron Young

Abstract: The combinatorics of track seeding has long been a computational bottleneck for triggering and offline computing in High Energy Physics (HEP), and remains so for the HL-LHC. Next-generation pixel sensors will be sufficiently fine-grained to determine angular information of the charged particle passing through from pixel-cluster properties. This detector technology immediately improves the situatio… ▽ More The combinatorics of track seeding has long been a computational bottleneck for triggering and offline computing in High Energy Physics (HEP), and remains so for the HL-LHC. Next-generation pixel sensors will be sufficiently fine-grained to determine angular information of the charged particle passing through from pixel-cluster properties. This detector technology immediately improves the situation for offline tracking, but any major improvements in physics reach are unrealized since they are dominated by lowest-level hardware trigger acceptance. We will demonstrate track angle and hit position prediction, including errors, using a mixture density network within a single layer of silicon as well as the progress towards and status of implementing the neural network in hardware on both FPGAs and ASICs. △ Less

Submitted 18 December, 2023; originally announced December 2023.

Comments: 6 pages, 3 figures, submitted to Neural Information Processing Systems 2023 (NeurIPS)

Report number: FERMILAB-PUB-23-513-CMS-ETD-PPD

Optimizing High Throughput Inference on Graph Neural Networks at Shared Computing Facilities with the NVIDIA Triton Inference Server

Authors: Claire Savard, Nicholas Manganelli, Burt Holzman, Lindsey Gray, Alexx Perloff, Kevin Pedro, Kevin Stenson, Keith Ulmer

Abstract: With machine learning applications now spanning a variety of computational tasks, multi-user shared computing facilities are devoting a rapidly increasing proportion of their resources to such algorithms. Graph neural networks (GNNs), for example, have provided astounding improvements in extracting complex signatures from data and are now widely used in a variety of applications, such as particle… ▽ More With machine learning applications now spanning a variety of computational tasks, multi-user shared computing facilities are devoting a rapidly increasing proportion of their resources to such algorithms. Graph neural networks (GNNs), for example, have provided astounding improvements in extracting complex signatures from data and are now widely used in a variety of applications, such as particle jet classification in high energy physics (HEP). However, GNNs also come with an enormous computational penalty that requires the use of GPUs to maintain reasonable throughput. At shared computing facilities, such as those used by physicists at Fermi National Accelerator Laboratory (Fermilab), methodical resource allocation and high throughput at the many-user scale are key to ensuring that resources are being used as efficiently as possible. These facilities, however, primarily provide CPU-only nodes, which proves detrimental to time-to-insight and computational throughput for workflows that include machine learning inference. In this work, we describe how a shared computing facility can use the NVIDIA Triton Inference Server to optimize its resource allocation and computing structure, recovering high throughput while scaling out to multiple users by massively parallelizing their machine learning inference. To demonstrate the effectiveness of this system in a realistic multi-user environment, we use the Fermilab Elastic Analysis Facility augmented with the Triton Inference Server to provide scalable and high throughput access to a HEP-specific GNN and report on the outcome. △ Less

Submitted 11 December, 2023; originally announced December 2023.

Comments: 20 pages, 14 figures, submitted to "Computing and Software for Big Science"

Choroidalyzer: An open-source, end-to-end pipeline for choroidal analysis in optical coherence tomography

Authors: Justin Engelmann, Jamie Burke, Charlene Hamid, Megan Reid-Schachter, Dan Pugh, Neeraj Dhaun, Diana Moukaddem, Lyle Gray, Niall Strang, Paul McGraw, Amos Storkey, Paul J. Steptoe, Stuart King, Tom MacGillivray, Miguel O. Bernabeu, Ian J. C. MacCormick

Abstract: Purpose: To develop Choroidalyzer, an open-source, end-to-end pipeline for segmenting the choroid region, vessels, and fovea, and deriving choroidal thickness, area, and vascular index. Methods: We used 5,600 OCT B-scans (233 subjects, 6 systemic disease cohorts, 3 device types, 2 manufacturers). To generate region and vessel ground-truths, we used state-of-the-art automatic methods following ma… ▽ More Purpose: To develop Choroidalyzer, an open-source, end-to-end pipeline for segmenting the choroid region, vessels, and fovea, and deriving choroidal thickness, area, and vascular index. Methods: We used 5,600 OCT B-scans (233 subjects, 6 systemic disease cohorts, 3 device types, 2 manufacturers). To generate region and vessel ground-truths, we used state-of-the-art automatic methods following manual correction of inaccurate segmentations, with foveal positions manually annotated. We trained a U-Net deep-learning model to detect the region, vessels, and fovea to calculate choroid thickness, area, and vascular index in a fovea-centred region of interest. We analysed segmentation agreement (AUC, Dice) and choroid metrics agreement (Pearson, Spearman, mean absolute error (MAE)) in internal and external test sets. We compared Choroidalyzer to two manual graders on a small subset of external test images and examined cases of high error. Results: Choroidalyzer took 0.299 seconds per image on a standard laptop and achieved excellent region (Dice: internal 0.9789, external 0.9749), very good vessel segmentation performance (Dice: internal 0.8817, external 0.8703) and excellent fovea location prediction (MAE: internal 3.9 pixels, external 3.4 pixels). For thickness, area, and vascular index, Pearson correlations were 0.9754, 0.9815, and 0.8285 (internal) / 0.9831, 0.9779, 0.7948 (external), respectively (all p<0.0001). Choroidalyzer's agreement with graders was comparable to the inter-grader agreement across all metrics. Conclusions: Choroidalyzer is an open-source, end-to-end pipeline that accurately segments the choroid and reliably extracts thickness, area, and vascular index. Especially choroidal vessel segmentation is a difficult and subjective task, and fully-automatic methods like Choroidalyzer could provide objectivity and standardisation. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Do AI models produce better weather forecasts than physics-based models? A quantitative evaluation case study of Storm Ciarán

Authors: Andrew J. Charlton-Perez, Helen F. Dacre, Simon Driscoll, Suzanne L. Gray, Ben Harvey, Natalie J. Harvey, Kieran M. R. Hunt, Robert W. Lee, Ran**i Swaminathan, Remy Vandaele, Ambrogio Volonté

Abstract: There has been huge recent interest in the potential of making operational weather forecasts using machine learning techniques. As they become a part of the weather forecasting toolbox, there is a pressing need to understand how well current machine learning models can simulate high-impact weather events. We compare forecasts of Storm Ciarán, a European windstorm that caused sixteen deaths and ext… ▽ More There has been huge recent interest in the potential of making operational weather forecasts using machine learning techniques. As they become a part of the weather forecasting toolbox, there is a pressing need to understand how well current machine learning models can simulate high-impact weather events. We compare forecasts of Storm Ciarán, a European windstorm that caused sixteen deaths and extensive damage in Northern Europe, made by machine learning and numerical weather prediction models. The four machine learning models considered (FourCastNet, Pangu-Weather, GraphCast and FourCastNet-v2) produce forecasts that accurately capture the synoptic-scale structure of the cyclone including the position of the cloud head, shape of the warm sector and location of warm conveyor belt jet, and the large-scale dynamical drivers important for the rapid storm development such as the position of the storm relative to the upper-level jet exit. However, their ability to resolve the more detailed structures important for issuing weather warnings is more mixed. All of the machine learning models underestimate the peak amplitude of winds associated with the storm, only some machine learning models resolve the warm core seclusion and none of the machine learning models capture the sharp bent-back warm frontal gradient. Our study shows there is a great deal about the performance and properties of machine learning weather forecasts that can be derived from case studies of high-impact weather events such as Storm Ciarán. △ Less

Submitted 19 February, 2024; v1 submitted 5 December, 2023; originally announced December 2023.

The U.S. CMS HL-LHC R&D Strategic Plan

Authors: Oliver Gutsche, Tulika Bose, Margaret Votava, David Mason, Andrew Melo, Mia Liu, Dirk Hufnagel, Lindsey Gray, Mike Hildreth, Burt Holzman, Kevin Lannon, Saba Sehrish, David Sperka, James Letts, Lothar Bauerdick, Kenneth Bloom

Abstract: The HL-LHC run is anticipated to start at the end of this decade and will pose a significant challenge for the scale of the HEP software and computing infrastructure. The mission of the U.S. CMS Software & Computing Operations Program is to develop and operate the software and computing resources necessary to process CMS data expeditiously and to enable U.S. physicists to fully participate in the… ▽ More The HL-LHC run is anticipated to start at the end of this decade and will pose a significant challenge for the scale of the HEP software and computing infrastructure. The mission of the U.S. CMS Software & Computing Operations Program is to develop and operate the software and computing resources necessary to process CMS data expeditiously and to enable U.S. physicists to fully participate in the physics of CMS. We have developed a strategic plan to prioritize R&D efforts to reach this goal for the HL-LHC. This plan includes four grand challenges: modernizing physics software and improving algorithms, building infrastructure for exabyte-scale datasets, transforming the scientific data analysis process and transitioning from R&D to operations. We are involved in a variety of R&D projects that fall within these grand challenges. In this talk, we will introduce our four grand challenges and outline the R&D program of the U.S. CMS Software & Computing Operations Program. △ Less

Submitted 4 December, 2023; v1 submitted 1 December, 2023; originally announced December 2023.

Comments: CHEP2023 proceedings, to be published in EPJ Web of Conferences

Exploring the Consistency, Quality and Challenges in Manual and Automated Coding of Free-text Diagnoses from Hospital Outpatient Letters

Authors: Warren Del-Pinto, George Demetriou, Meghna Jani, Rikesh Patel, Leanne Gray, Alex Bulcock, Niels Peek, Andrew S. Kanter, William G Dixon, Goran Nenadic

Abstract: Coding of unstructured clinical free-text to produce interoperable structured data is essential to improve direct care, support clinical communication and to enable clinical research.However, manual clinical coding is difficult and time consuming, which motivates the development and use of natural language processing for automated coding. This work evaluates the quality and consistency of both man… ▽ More Coding of unstructured clinical free-text to produce interoperable structured data is essential to improve direct care, support clinical communication and to enable clinical research.However, manual clinical coding is difficult and time consuming, which motivates the development and use of natural language processing for automated coding. This work evaluates the quality and consistency of both manual and automated clinical coding of diagnoses from hospital outpatient letters. Using 100 randomly selected letters, two human clinicians performed coding of diagnosis lists to SNOMED CT. Automated coding was also performed using IMO's Concept Tagger. A gold standard was constructed by a panel of clinicians from a subset of the annotated diagnoses. This was used to evaluate the quality and consistency of both manual and automated coding via (1) a distance-based metric, treating SNOMED CT as a graph, and (2) a qualitative metric agreed upon by the panel of clinicians. Correlation between the two metrics was also evaluated. Comparing human and computer-generated codes to the gold standard, the results indicate that humans slightly out-performed automated coding, while both performed notably better when there was only a single diagnosis contained in the free-text description. Automated coding was considered acceptable by the panel of clinicians in approximately 90% of cases. △ Less

Submitted 17 November, 2023; originally announced November 2023.

Progress in End-to-End Optimization of Detectors for Fundamental Physics with Differentiable Programming

Authors: Max Aehle, Lorenzo Arsini, R. Belén Barreiro, Anastasios Belias, Florian Bury, Susana Cebrian, Alexander Demin, Jennet Dickinson, Julien Donini, Tommaso Dorigo, Michele Doro, Nicolas R. Gauger, Andrea Giammanco, Lindsey Gray, Borja S. González, Verena Kain, Jan Kieseler, Lisa Kusch, Marcus Liwicki, Gernot Maier, Federico Nardi, Fedor Ratnikov, Ryan Roussel, Roberto Ruiz de Austri, Fredrik Sandin , et al. (5 additional authors not shown)

Abstract: In this article we examine recent developments in the research area concerning the creation of end-to-end models for the complete optimization of measuring instruments. The models we consider rely on differentiable programming methods and on the specification of a software pipeline including all factors impacting performance -- from the data-generating processes to their reconstruction and the ext… ▽ More In this article we examine recent developments in the research area concerning the creation of end-to-end models for the complete optimization of measuring instruments. The models we consider rely on differentiable programming methods and on the specification of a software pipeline including all factors impacting performance -- from the data-generating processes to their reconstruction and the extraction of inference on the parameters of interest of a measuring instrument -- along with the careful specification of a utility function well aligned with the end goals of the experiment. Building on previous studies originated within the MODE Collaboration, we focus specifically on applications involving instruments for particle physics experimentation, as well as industrial and medical applications that share the detection of radiation as their data-generating mechanism. △ Less

Submitted 30 September, 2023; originally announced October 2023.

Comments: 70 pages, 17 figures. To be submitted to journal

Smart pixel sensors: towards on-sensor filtering of pixel clusters with deep learning

Authors: Jieun Yoo, Jennet Dickinson, Morris Swartz, Giuseppe Di Guglielmo, Alice Bean, Douglas Berry, Manuel Blanco Valentin, Karri DiPetrillo, Farah Fahim, Lindsey Gray, James Hirschauer, Shruti R. Kulkarni, Ron Lipton, Petar Maksimovic, Corrinne Mills, Mark S. Neubauer, Benjamin Parpillon, Gauri Pradhan, Chinar Syal, Nhan Tran, Dahai Wen, Aaron Young

Abstract: Highly granular pixel detectors allow for increasingly precise measurements of charged particle tracks. Next-generation detectors require that pixel sizes will be further reduced, leading to unprecedented data rates exceeding those foreseen at the High Luminosity Large Hadron Collider. Signal processing that handles data incoming at a rate of O(40MHz) and intelligently reduces the data within the… ▽ More Highly granular pixel detectors allow for increasingly precise measurements of charged particle tracks. Next-generation detectors require that pixel sizes will be further reduced, leading to unprecedented data rates exceeding those foreseen at the High Luminosity Large Hadron Collider. Signal processing that handles data incoming at a rate of O(40MHz) and intelligently reduces the data within the pixelated region of the detector at rate will enhance physics performance at high luminosity and enable physics analyses that are not currently possible. Using the shape of charge clusters deposited in an array of small pixels, the physical properties of the traversing particle can be extracted with locally customized neural networks. In this first demonstration, we present a neural network that can be embedded into the on-sensor readout and filter out hits from low momentum tracks, reducing the detector's data volume by 54.4-75.4%. The network is designed and simulated as a custom readout integrated circuit with 28 nm CMOS technology and is expected to operate at less than 300 $μW$ with an area of less than 0.2 mm$^2$. The temporal development of charge clusters is investigated to demonstrate possible future performance gains, and there is also a discussion of future algorithmic and technological improvements that could enhance efficiency, data reduction, and power per area. △ Less

Submitted 3 October, 2023; originally announced October 2023.

Catching Tidal Dwarf Galaxies at a Later Evolutionary Stage with ALFALFA

Authors: Laurin M. Gray, Katherine L. Rhode, Lukas Leisman, Pavel E. Mancera Piña, John M. Cannon, John J. Salzer, Lexi Gault, Jackson Fuson, Gyula I. G. Józsa, Elizabeth A. K. Adams, Nicholas J. Smith, Martha P. Haynes, Steven Janowiecki, Hannah J. Pagel

Abstract: We present deep optical imaging and photometry of four objects classified as "Almost-Dark" galaxies in the ALFALFA survey because of their gas-rich nature and extremely faint or missing optical emission in existing catalogs. They have HI masses of $10^7$-$10^9$ $M_{\odot}$ and distances of $\sim$9-100 Mpc. Observations with the WIYN 3.5m telescope and One Degree Imager reveal faint stellar compone… ▽ More We present deep optical imaging and photometry of four objects classified as "Almost-Dark" galaxies in the ALFALFA survey because of their gas-rich nature and extremely faint or missing optical emission in existing catalogs. They have HI masses of $10^7$-$10^9$ $M_{\odot}$ and distances of $\sim$9-100 Mpc. Observations with the WIYN 3.5m telescope and One Degree Imager reveal faint stellar components with central surface brightnesses of $\sim$24-25 $\mathrm{mag}\,\mathrm{arcsec}^{-2}$ in the g-band. We also present the results of HI synthesis observations with the Westerbork Synthesis Radio Telescope. These Almost-Dark galaxies have been identified as possible tidal dwarf galaxies (TDGs) based on their proximity to one or more massive galaxies. We demonstrate that AGC 229398 and AGC 333576 likely have the low dark matter content and large effective radii representative of TDGs. They are located much farther from their progenitors than previously studied TDGs, suggesting they are older and more evolved. AGC 219369 is likely dark matter dominated, while AGC 123216 has a dark matter content that is unusually high for a TDG, but low for a normal dwarf galaxy. We consider possible mechanisms for the formation of the TDG candidates such as a traditional major merger scenario and gas ejection from a high velocity fly-by. Blind HI surveys like ALFALFA enable the detection of gas-rich, optically faint TDGs that can be overlooked in other surveys, thereby providing a more complete census of the low-mass galaxy population and an opportunity to study TDGs at a more advanced stage of their life cycle. △ Less

Submitted 17 April, 2023; originally announced April 2023.

Comments: 38 pages, 26 figures. Accepted by AJ

Journal ref: AJ 165 197 (2023)

Can Workers Meaningfully Consent to Workplace Wellbeing Technologies?

Authors: Shreya Chowdhary, Anna Kawakami, Mary L. Gray, **a Suh, Alexandra Olteanu, Koustuv Saha

Abstract: Sensing technologies deployed in the workplace can unobtrusively collect detailed data about individual activities and group interactions that are otherwise difficult to capture. A hopeful application of these technologies is that they can help businesses and workers optimize productivity and wellbeing. However, given the workplace's inherent and structural power dynamics, the prevalent approach o… ▽ More Sensing technologies deployed in the workplace can unobtrusively collect detailed data about individual activities and group interactions that are otherwise difficult to capture. A hopeful application of these technologies is that they can help businesses and workers optimize productivity and wellbeing. However, given the workplace's inherent and structural power dynamics, the prevalent approach of accepting tacit compliance to monitor work activities rather than seeking workers' meaningful consent raises privacy and ethical concerns. This paper unpacks the challenges workers face when consenting to workplace wellbeing technologies. Using a hypothetical case to prompt reflection among six multi-stakeholder focus groups involving 15 participants, we explored participants' expectations and capacity to consent to these technologies. We sketched possible interventions that could better support meaningful consent to workplace wellbeing technologies by drawing on critical computing and feminist scholarship -- which reframes consent from a purely individual choice to a structural condition experienced at the individual level that needs to be freely given, reversible, informed, enthusiastic, and specific (FRIES). The focus groups revealed how workers are vulnerable to "meaningless" consent -- as they may be subject to power dynamics that minimize their ability to withhold consent and may thus experience an erosion of autonomy, also undermining the value of data gathered in the name of "wellbeing." To meaningfully consent, participants wanted changes to the technology and to the policies and practices surrounding the technology. Our map** of what prevents workers from meaningfully consenting to workplace wellbeing technologies (challenges) and what they require to do so (interventions) illustrates how the lack of meaningful consent is a structural problem requiring socio-technical solutions. △ Less

Submitted 19 May, 2023; v1 submitted 13 March, 2023; originally announced March 2023.

ACM Class: H.5.3; J.4

Journal ref: 2023 ACM Conference on Fairness, Accountability, and Transparency (FAccT '23), June 12--15, 2023, Chicago, IL, USA

Data Science and Machine Learning in Education

Authors: Gabriele Benelli, Thomas Y. Chen, Javier Duarte, Matthew Feickert, Matthew Graham, Lindsey Gray, Dan Hackett, Phil Harris, Shih-Chieh Hsu, Gregor Kasieczka, Elham E. Khoda, Matthias Komm, Mia Liu, Mark S. Neubauer, Scarlet Norberg, Alexx Perloff, Marcel Rieger, Claire Savard, Kazuhiro Terao, Savannah Thais, Avik Roy, Jean-Roch Vlimant, Grigorios Chachamis

Abstract: The growing role of data science (DS) and machine learning (ML) in high-energy physics (HEP) is well established and pertinent given the complex detectors, large data, sets and sophisticated analyses at the heart of HEP research. Moreover, exploiting symmetries inherent in physics data have inspired physics-informed ML as a vibrant sub-field of computer science research. HEP researchers benefit gr… ▽ More The growing role of data science (DS) and machine learning (ML) in high-energy physics (HEP) is well established and pertinent given the complex detectors, large data, sets and sophisticated analyses at the heart of HEP research. Moreover, exploiting symmetries inherent in physics data have inspired physics-informed ML as a vibrant sub-field of computer science research. HEP researchers benefit greatly from materials widely available materials for use in education, training and workforce development. They are also contributing to these materials and providing software to DS/ML-related fields. Increasingly, physics departments are offering courses at the intersection of DS, ML and physics, often using curricula developed by HEP researchers and involving open software and data used in HEP. In this white paper, we explore synergies between HEP research and DS/ML education, discuss opportunities and challenges at this intersection, and propose community activities that will be mutually beneficial. △ Less

Submitted 19 July, 2022; originally announced July 2022.

Comments: Contribution to Snowmass 2021

Collaborative Computing Support for Analysis Facilities Exploiting Software as Infrastructure Techniques

Authors: Maria Acosta Flechas, Garhan Attebury, Kenneth Bloom, Brian Bockelman, Lindsey Gray, Burt Holzman, Carl Lundstedt, Oksana Shadura, Nicholas Smith, John Thiltges

Abstract: Prior to the public release of Kubernetes it was difficult to conduct joint development of elaborate analysis facilities due to the highly non-homogeneous nature of hardware and network topology across compute facilities. However, since the advent of systems like Kubernetes and OpenShift, which provide declarative interfaces for building fault-tolerant and self-healing deployments of networked sof… ▽ More Prior to the public release of Kubernetes it was difficult to conduct joint development of elaborate analysis facilities due to the highly non-homogeneous nature of hardware and network topology across compute facilities. However, since the advent of systems like Kubernetes and OpenShift, which provide declarative interfaces for building fault-tolerant and self-healing deployments of networked software, it is possible for multiple institutes to collaborate more effectively since resource details are abstracted away through various forms of hardware and software virtualization. In this whitepaper we will outline the development of two analysis facilities: "Coffea-casa" at University of Nebraska Lincoln and the "Elastic Analysis Facility" at Fermilab, and how utilizing platform abstraction has improved the development of common software for each of these facilities, and future development plans made possible by this methodology. △ Less

Submitted 22 March, 2022; v1 submitted 18 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Report number: FERMILAB-FN-1163-SCD

Reconstruction of Large Radius Tracks with the Exa.TrkX pipeline

Authors: Chun-Yi Wang, Xiangyang Ju, Shih-Chieh Hsu, Daniel Murnane, Paolo Calafiura, Steven Farrell, Maria Spiropulu, Jean-Roch Vlimant, Adam Aurisano, V Hewes, Giuseppe Cerati, Lindsey Gray, Thomas Klijnsma, Jim Kowalkowski, Markus Atkinson, Mark Neubauer, Gage DeZoort, Savannah Thais, Alexandra Ballow, Alina Lazar, Sylvain Caillou, Charline Rougier, Jan Stark, Alexis Vallier, Jad Sardain

Abstract: Particle tracking is a challenging pattern recognition task at the Large Hadron Collider (LHC) and the High Luminosity-LHC. Conventional algorithms, such as those based on the Kalman Filter, achieve excellent performance in reconstructing the prompt tracks from the collision points. However, they require dedicated configuration and additional computing time to efficiently reconstruct the large rad… ▽ More Particle tracking is a challenging pattern recognition task at the Large Hadron Collider (LHC) and the High Luminosity-LHC. Conventional algorithms, such as those based on the Kalman Filter, achieve excellent performance in reconstructing the prompt tracks from the collision points. However, they require dedicated configuration and additional computing time to efficiently reconstruct the large radius tracks created away from the collision points. We developed an end-to-end machine learning-based track finding algorithm for the HL-LHC, the Exa.TrkX pipeline. The pipeline is designed so as to be agnostic about global track positions. In this work, we study the performance of the Exa.TrkX pipeline for finding large radius tracks. Trained with all tracks in the event, the pipeline simultaneously reconstructs prompt tracks and large radius tracks with high efficiencies. This new capability offered by the Exa.TrkX pipeline may enable us to search for new physics in real time. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Comments: 5 pages, 3 figures. Proceedings of 20th International Workshop on Advanced Computing and Analysis Techniques in Physics Research

Strategy for Understanding the Higgs Physics: The Cool Copper Collider

Authors: Sridhara Dasu, Emilio A. Nanni, Michael E. Peskin, Caterina Vernieri, Tim Barklow, Rainer Bartoldus, Pushpalatha C. Bhat, Kevin Black, Jim Brau, Martin Breidenbach, Nathaniel Craig, Dmitri Denisov, Lindsey Gray, Philip C. Harris, Michael Kagan, Zhen Liu, Patrick Meade, Nathan Majernik, Sergei Nagaitsev, Isobel Ojalvo, Christoph Paus, Carl Schroeder, Ariel G. Schwartzman, Jan Strube, Su Dong , et al. (4 additional authors not shown)

Abstract: A program to build a lepton-collider Higgs factory, to precisely measure the couplings of the Higgs boson to other particles, followed by a higher energy run to establish the Higgs self-coupling and expand the new physics reach, is widely recognized as a primary focus of modern particle physics. We propose a strategy that focuses on a new technology and preliminary estimates suggest that can lead… ▽ More A program to build a lepton-collider Higgs factory, to precisely measure the couplings of the Higgs boson to other particles, followed by a higher energy run to establish the Higgs self-coupling and expand the new physics reach, is widely recognized as a primary focus of modern particle physics. We propose a strategy that focuses on a new technology and preliminary estimates suggest that can lead to a compact, affordable machine. New technology investigations will provide much needed enthusiasm for our field, resulting in trained workforce. This cost-effective, compact design, with technologies useful for a broad range of other accelerator applications, could be realized as a project in the US. Its technology innovations, both in the accelerator and the detector, will offer unique and exciting opportunities to young scientists. Moreover, cost effective compact designs, broadly applicable to other fields of research, are more likely to obtain financial support from our funding agencies. △ Less

Submitted 7 June, 2022; v1 submitted 15 March, 2022; originally announced March 2022.

Comments: 11 pages, 2 figures, contribution to Snowmass 2021

Report number: SLAC-PUB-17661

The International Linear Collider: Report to Snowmass 2021

Authors: Alexander Aryshev, Ties Behnke, Mikael Berggren, James Brau, Nathaniel Craig, Ayres Freitas, Frank Gaede, Spencer Gessner, Stefania Gori, Christophe Grojean, Sven Heinemeyer, Daniel Jeans, Katja Kruger, Benno List, Jenny List, Zhen Liu, Shinichiro Michizono, David W. Miller, Ian Moult, Hitoshi Murayama, Tatsuya Nakada, Emilio Nanni, Mihoko Nojiri, Hasan Padamsee, Maxim Perelstein , et al. (487 additional authors not shown)

Abstract: The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu… ▽ More The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community. △ Less

Submitted 16 January, 2023; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: 356 pages, Large pdf file (40 MB) submitted to Snowmass 2021; v2 references to Snowmass contributions added, additional authors; v3 references added, some updates, additional authors

Report number: DESY-22-045, IFT--UAM/CSIC--22-028, KEK Preprint 2021-61, PNNL-SA-160884, SLAC-PUB-17662

GNN-based end-to-end reconstruction in the CMS Phase 2 High-Granularity Calorimeter

Authors: Saptaparna Bhattacharya, Nadezda Chernyavskaya, Saranya Ghosh, Lindsey Gray, Jan Kieseler, Thomas Klijnsma, Kenneth Long, Raheel Nawaz, Kevin Pedro, Maurizio Pierini, Gauri Pradhan, Shah Rukh Qasim, Oleksander Viazlo, Philipp Zehetner

Abstract: We present the current stage of research progress towards a one-pass, completely Machine Learning (ML) based imaging calorimeter reconstruction. The model used is based on Graph Neural Networks (GNNs) and directly analyzes the hits in each HGCAL endcap. The ML algorithm is trained to predict clusters of hits originating from the same incident particle by labeling the hits with the same cluster ind… ▽ More We present the current stage of research progress towards a one-pass, completely Machine Learning (ML) based imaging calorimeter reconstruction. The model used is based on Graph Neural Networks (GNNs) and directly analyzes the hits in each HGCAL endcap. The ML algorithm is trained to predict clusters of hits originating from the same incident particle by labeling the hits with the same cluster index. We impose simple criteria to assess whether the hits associated as a cluster by the prediction are matched to those hits resulting from any particular individual incident particles. The algorithm is studied by simulating two tau leptons in each of the two HGCAL endcaps, where each tau may decay according to its measured standard model branching probabilities. The simulation includes the material interaction of the tau decay products which may create additional particles incident upon the calorimeter. Using this varied multiparticle environment we can investigate the application of this reconstruction technique and begin to characterize energy containment and performance. △ Less

Submitted 2 March, 2022; originally announced March 2022.

Comments: 5 pages, 5 figures, proceedings for the 20th International Workshop on Advanced Computing and Analysis Techniques in Physics Research

Constraints on future analysis metadata systems in High Energy Physics

Authors: T. J. Khoo, A. Reinsvold Hall, N. Skidmore, S. Alderweireldt, J. Anders, C. Burr, W. Buttinger, P. David, L. Gouskos, L. Gray, S. Hageboeck, A. Krasznahorkay, P. Laycock, A. Lister, Z. Marshall, A. B. Meyer, T. Novak, S. Rappoccio, M. Ritter, E. Rodrigues, J. Rumsevicius, L. Sexton-Kennedy, N. Smith, G. A. Stewart, S. Wertz

Abstract: In High Energy Physics (HEP), analysis metadata comes in many forms -- from theoretical cross-sections, to calibration corrections, to details about file processing. Correctly applying metadata is a crucial and often time-consuming step in an analysis, but designing analysis metadata systems has historically received little direct attention. Among other considerations, an ideal metadata tool shoul… ▽ More In High Energy Physics (HEP), analysis metadata comes in many forms -- from theoretical cross-sections, to calibration corrections, to details about file processing. Correctly applying metadata is a crucial and often time-consuming step in an analysis, but designing analysis metadata systems has historically received little direct attention. Among other considerations, an ideal metadata tool should be easy to use by new analysers, should scale to large data volumes and diverse processing paradigms, and should enable future analysis reinterpretation. This document, which is the product of community discussions organised by the HEP Software Foundation, categorises types of metadata by scope and format and gives examples of current metadata solutions. Important design considerations for metadata systems, including sociological factors, analysis preservation efforts, and technical factors, are discussed. A list of best practices and technical requirements for future analysis metadata systems is presented. These best practices could guide the development of a future cross-experimental effort for analysis metadata tools. △ Less

Submitted 19 May, 2022; v1 submitted 1 March, 2022; originally announced March 2022.

Journal ref: Comput Softw Big Sci 6, 13 (2022)

Accelerating the Inference of the Exa.TrkX Pipeline

Authors: Alina Lazar, Xiangyang Ju, Daniel Murnane, Paolo Calafiura, Steven Farrell, Yaoyuan Xu, Maria Spiropulu, Jean-Roch Vlimant, Giuseppe Cerati, Lindsey Gray, Thomas Klijnsma, Jim Kowalkowski, Markus Atkinson, Mark Neubauer, Gage DeZoort, Savannah Thais, Shih-Chieh Hsu, Adam Aurisano, V Hewes, Alexandra Ballow, Nirajan Acharya, Chun-yi Wang, Emma Liu, Alberto Lucas

Abstract: Recently, graph neural networks (GNNs) have been successfully used for a variety of particle reconstruction problems in high energy physics, including particle tracking. The Exa.TrkX pipeline based on GNNs demonstrated promising performance in reconstructing particle tracks in dense environments. It includes five discrete steps: data encoding, graph building, edge filtering, GNN, and track labelin… ▽ More Recently, graph neural networks (GNNs) have been successfully used for a variety of particle reconstruction problems in high energy physics, including particle tracking. The Exa.TrkX pipeline based on GNNs demonstrated promising performance in reconstructing particle tracks in dense environments. It includes five discrete steps: data encoding, graph building, edge filtering, GNN, and track labeling. All steps were written in Python and run on both GPUs and CPUs. In this work, we accelerate the Python implementation of the pipeline through customized and commercial GPU-enabled software libraries, and develop a C++ implementation for inferencing the pipeline. The implementation features an improved, CUDA-enabled fixed-radius nearest neighbor search for graph building and a weakly connected component graph algorithm for track labeling. GNNs and other trained deep learning models are converted to ONNX and inferenced via the ONNX Runtime C++ API. The complete C++ implementation of the pipeline allows integration with existing tracking software. We report the memory usage and average event latency tracking performance of our implementation applied to the TrackML benchmark dataset. △ Less

Submitted 14 February, 2022; originally announced February 2022.

Comments: Proceedings submission to ACAT2021 Conference, 7 pages

Welsch Based Multiview Disparity Estimation

Authors: James L. Gray, Aous T. Naman, David S. Taubman

Abstract: In this work, we explore disparity estimation from a high number of views. We experimentally identify occlusions as a key challenge for disparity estimation for applications with high numbers of views. In particular, occlusions can actually result in a degradation in accuracy as more views are added to a dataset. We propose the use of a Welsch loss function for the data term in a global variationa… ▽ More In this work, we explore disparity estimation from a high number of views. We experimentally identify occlusions as a key challenge for disparity estimation for applications with high numbers of views. In particular, occlusions can actually result in a degradation in accuracy as more views are added to a dataset. We propose the use of a Welsch loss function for the data term in a global variational framework for disparity estimation. We also propose a disciplined war** strategy and a progressive inclusion of views strategy that can reduce the need for coarse to fine strategies that discard high spatial frequency components from the early iterations. Experimental results demonstrate that the proposed approach produces superior and/or more robust estimates than other conventional variational approaches. △ Less

Submitted 2 October, 2021; originally announced October 2021.

Comments: Published in 2021 IEEE International Conference on Image Processing (ICIP), 5 pages

Journal ref: 2021 IEEE International Conference on Image Processing (ICIP), 2021, pp. 3223-3227,

The ALFALFA Almost-Dark Galaxy AGC~229101: A Two Billion Solar Mass HI Cloud with a Very Low Surface Brightness Optical Counterpart

Authors: Lukas Leisman, Katherine L. Rhode, Catherine Ball, Hannah J. Pagel, John M. Cannon, John J. Salzer, Steven Janowiecki, William F. Janesh, Gyula I. G. Józsa, Riccardo Giovanelli, Martha P. Haynes, Elizabeth A. K. Adams, Laurin Gray, Nicholas J. Smith

Abstract: We present results from deep HI and optical imaging of AGC 229101, an unusual HI source detected at v$_{\rm helio}$ = 7116 km/s in the ALFALFA survey. Initially classified as a candidate "dark" source because it lacks a clear optical counterpart in SDSS or DSS2 imaging, AGC 229101 has $10^{9.31\pm0.05}$ solar masses of HI, but an HI line width of only 43$\pm$9 km/s. Low resolution WSRT imaging and… ▽ More We present results from deep HI and optical imaging of AGC 229101, an unusual HI source detected at v$_{\rm helio}$ = 7116 km/s in the ALFALFA survey. Initially classified as a candidate "dark" source because it lacks a clear optical counterpart in SDSS or DSS2 imaging, AGC 229101 has $10^{9.31\pm0.05}$ solar masses of HI, but an HI line width of only 43$\pm$9 km/s. Low resolution WSRT imaging and higher resolution VLA B-array imaging show that the source is significantly elongated, stretching over a projected length of ~80 kpc. The HI imaging resolves the source into two parts of roughly equal mass. WIYN pODI optical imaging reveals a faint, blue optical counterpart coincident with the northern portion of the HI. The peak surface brightness of the optical source is only $μ_{g}$ = 26.6 mag arcsec$^{-2}$, well below the typical cutoff that defines the isophotal edge of a galaxy, and its estimated stellar mass is only $10^{7.32\pm0.33}$ solar masses, yielding an overall neutral gas-to-stellar mass ratio of M$_{\rm HI}$/M$_*=$~98$_{+111}\atop^{-52}$. We demonstrate the extreme nature of this object by comparing its properties to those of other HI-rich sources in ALFALFA and the literature. We also explore potential scenarios that might explain the existence of AGC~229101, including a tidal encounter with neighboring objects and a merger of two dark HI clouds. △ Less

Submitted 24 September, 2021; originally announced September 2021.

Comments: 18 pages, 8 figures, accepted by AJ

Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector

Authors: R. Abbott, A. Abreu, F. Addesa, M. Alhusseini, T. Anderson, Y. Andreev, A. Apresyan, R. Arcidiacono, M. Arenton, E. Auffray, D. Bastos, L. A. T. Bauerdick, R. Bellan, M. Bellato, A. Benaglia, M. Benettoni, R. Bertoni, M. Besancon, S. Bharthuar, A. Bornheim, E. Brücken, J. N. Butler, C. Campagnari, M. Campana, R. Carlin , et al. (174 additional authors not shown)

Abstract: The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about… ▽ More The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about 30 ps at the beginning of operation, and degrading to 50-60 ps at the end of the detector lifetime as a result of radiation damage. In this work, we present the results obtained using a 120 GeV proton beam at the Fermilab Test Beam Facility to measure the time resolution of unirradiated sensors. A proof-of-concept of the sensor layout proposed for the barrel region of the MTD, consisting of elongated crystal bars with dimensions of about 3 x 3 x 57 mm$^3$ and with double-ended SiPM readout, is demonstrated. This design provides a robust time measurement independent of the impact point of the MIP along the crystal bar. We tested LYSO:Ce bars of different thickness (2, 3, 4 mm) with a geometry close to the reference design and coupled to SiPMs manufactured by Hamamatsu and Fondazione Bruno Kessler. The various aspects influencing the timing performance such as the crystal thickness, properties of the SiPMs (e.g. photon detection efficiency), and impact angle of the MIP are studied. A time resolution of about 28 ps is measured for MIPs crossing a 3 mm thick crystal bar, corresponding to an MPV energy deposition of 2.6 MeV, and of 22 ps for the 4.2 MeV MPV energy deposition expected in the BTL, matching the detector performance target for unirradiated devices. △ Less

Submitted 16 July, 2021; v1 submitted 15 April, 2021; originally announced April 2021.

Journal ref: Journal of Instrumentation, Volume 16, July 2021

Performance of a Geometric Deep Learning Pipeline for HL-LHC Particle Tracking

Authors: Xiangyang Ju, Daniel Murnane, Paolo Calafiura, Nicholas Choma, Sean Conlon, Steve Farrell, Yaoyuan Xu, Maria Spiropulu, Jean-Roch Vlimant, Adam Aurisano, V Hewes, Giuseppe Cerati, Lindsey Gray, Thomas Klijnsma, Jim Kowalkowski, Markus Atkinson, Mark Neubauer, Gage DeZoort, Savannah Thais, Aditi Chauhan, Alex Schuy, Shih-Chieh Hsu, Alex Ballow, and Alina Lazar

Abstract: The Exa.TrkX project has applied geometric learning concepts such as metric learning and graph neural networks to HEP particle tracking. Exa.TrkX's tracking pipeline groups detector measurements to form track candidates and filters them. The pipeline, originally developed using the TrackML dataset (a simulation of an LHC-inspired tracking detector), has been demonstrated on other detectors, includ… ▽ More The Exa.TrkX project has applied geometric learning concepts such as metric learning and graph neural networks to HEP particle tracking. Exa.TrkX's tracking pipeline groups detector measurements to form track candidates and filters them. The pipeline, originally developed using the TrackML dataset (a simulation of an LHC-inspired tracking detector), has been demonstrated on other detectors, including DUNE Liquid Argon TPC and CMS High-Granularity Calorimeter. This paper documents new developments needed to study the physics and computing performance of the Exa.TrkX pipeline on the full TrackML dataset, a first step towards validating the pipeline using ATLAS and CMS data. The pipeline achieves tracking efficiency and purity similar to production tracking algorithms. Crucially for future HEP applications, the pipeline benefits significantly from GPU acceleration, and its computational requirements scale close to linearly with the number of particles in the event. △ Less

Submitted 21 September, 2021; v1 submitted 11 March, 2021; originally announced March 2021.

Graph Neural Network for Object Reconstruction in Liquid Argon Time Projection Chambers

Authors: V Hewes, Adam Aurisano, Giuseppe Cerati, Jim Kowalkowski, Claire Lee, Wei-keng Liao, Alexandra Day, Ankit Agrawal, Maria Spiropulu, Jean-Roch Vlimant, Lindsey Gray, Thomas Klijnsma, Paolo Calafiura, Sean Conlon, Steve Farrell, Xiangyang Ju, Daniel Murnane

Abstract: This paper presents a graph neural network (GNN) technique for low-level reconstruction of neutrino interactions in a Liquid Argon Time Projection Chamber (LArTPC). GNNs are still a relatively novel technique, and have shown great promise for similar reconstruction tasks in the LHC. In this paper, a multihead attention message passing network is used to classify the relationship between detector… ▽ More This paper presents a graph neural network (GNN) technique for low-level reconstruction of neutrino interactions in a Liquid Argon Time Projection Chamber (LArTPC). GNNs are still a relatively novel technique, and have shown great promise for similar reconstruction tasks in the LHC. In this paper, a multihead attention message passing network is used to classify the relationship between detector hits by labelling graph edges, determining whether hits were produced by the same underlying particle, and if so, the particle type. The trained model is 84% accurate overall, and performs best on the EM shower and muon track classes. The model's strengths and weaknesses are discussed, and plans for develo** this technique further are summarised. △ Less

Submitted 11 March, 2021; v1 submitted 10 March, 2021; originally announced March 2021.

Comments: 7 pages, 3 figures, submitted to the 25th International Conference on Computing in High-Energy and Nuclear Physics

The Analog Front-end for the LGAD Based Precision Timing Application in CMS ETL

Authors: Quan Sun, Sunil M. Dogra, Christopher Edwards, Datao Gong, Lindsey Gray, Xing Huang, Siddhartha Joshi, Jongho Lee, Chonghan Liu, Tiehui Liu, Tiankuan Liu, Sergey Los, Chang-Seong Moon, Geonhee Oh, Jamieson Olsen, Luciano Ristori, Hanhan Sun, Xiao Wang, **yuan Wu, **gbo Ye, Zhenyu Ye, Li Zhang, Wei Zhang

Abstract: The analog front-end for the Low Gain Avalanche Detector (LGAD) based precision timing application in the CMS Endcap Timing Layer (ETL) has been prototyped in a 65 nm CMOS mini-ASIC named ETROC0. Serving as the very first prototype of ETL readout chip (ETROC), ETROC0 aims to study and demonstrate the performance of the analog frontend, with the goal to achieve 40 to 50 ps time resolution per hit w… ▽ More The analog front-end for the Low Gain Avalanche Detector (LGAD) based precision timing application in the CMS Endcap Timing Layer (ETL) has been prototyped in a 65 nm CMOS mini-ASIC named ETROC0. Serving as the very first prototype of ETL readout chip (ETROC), ETROC0 aims to study and demonstrate the performance of the analog frontend, with the goal to achieve 40 to 50 ps time resolution per hit with LGAD (therefore reach about 30ps per track with two detector-layer hits per track). ETROC0 consists of preamplifier and discriminator stages, which amplifies the LGAD signal and generates digital pulses containing time of arrival and time over threshold information. This paper will focus on the design considerations that lead to the ETROC front-end architecture choice, the key design features of the building blocks, the methodology of using the LGAD simulation data to evaluate and optimize the front-end design. The ETROC0 prototype chips have been extensively tested using charge injection and the measured performance agrees well with simulation. The initial beam test results are also presented, with time resolution of around 33 ps observed from the preamplifier waveform analysis and around 41 ps from the discriminator pulses analysis. A subset of ETROC0 chips have also been tested to a total ionizing dose of 100 MRad with X-ray and no performance degradation been observed. △ Less

Submitted 28 December, 2020; originally announced December 2020.

Accelerated Charged Particle Tracking with Graph Neural Networks on FPGAs

Authors: Aneesh Heintz, Vesal Razavimaleki, Javier Duarte, Gage DeZoort, Isobel Ojalvo, Savannah Thais, Markus Atkinson, Mark Neubauer, Lindsey Gray, Sergo **dariani, Nhan Tran, Philip Harris, Dylan Rankin, Thea Aarrestad, Vladimir Loncar, Maurizio Pierini, Sioni Summers, Jennifer Ngadiuba, Mia Liu, Edward Kreinar, Zhenbin Wu

Abstract: We develop and study FPGA implementations of algorithms for charged particle tracking based on graph neural networks. The two complementary FPGA designs are based on OpenCL, a framework for writing programs that execute across heterogeneous platforms, and hls4ml, a high-level-synthesis-based compiler for neural network to firmware conversion. We evaluate and compare the resource usage, latency, an… ▽ More We develop and study FPGA implementations of algorithms for charged particle tracking based on graph neural networks. The two complementary FPGA designs are based on OpenCL, a framework for writing programs that execute across heterogeneous platforms, and hls4ml, a high-level-synthesis-based compiler for neural network to firmware conversion. We evaluate and compare the resource usage, latency, and tracking performance of our implementations based on a benchmark dataset. We find a considerable speedup over CPU-based execution is possible, potentially enabling such algorithms to be used effectively in future computing workflows and the FPGA-based Level-1 trigger at the CERN Large Hadron Collider. △ Less

Submitted 30 November, 2020; originally announced December 2020.

Comments: 8 pages, 4 figures, To appear in Third Workshop on Machine Learning and the Physical Sciences (NeurIPS 2020)

Report number: FERMILAB-CONF-20-622-CMS-SCD

Analysis Description Languages for the LHC

Authors: Sezen Sekmen, Philippe Gras, Lindsey Gray, Benjamin Krikler, Jim Pivarski, Harrison B. Prosper, Andrea Rizzi, Gokhan Unel, Gordon Watts

Abstract: An analysis description language is a domain specific language capable of describing the contents of an LHC analysis in a standard and unambiguous way, independent of any computing framework. It is designed for use by anyone with an interest in, and knowledge of, LHC physics, i.e., experimentalists, phenomenologists and other enthusiasts. Adopting analysis description languages would bring numerou… ▽ More An analysis description language is a domain specific language capable of describing the contents of an LHC analysis in a standard and unambiguous way, independent of any computing framework. It is designed for use by anyone with an interest in, and knowledge of, LHC physics, i.e., experimentalists, phenomenologists and other enthusiasts. Adopting analysis description languages would bring numerous benefits for the LHC experimental and phenomenological communities ranging from analysis preservation beyond the lifetimes of experiments or analysis software to facilitating the abstraction, design, visualization, validation, combination, reproduction, interpretation and overall communication of the analysis contents. Here, we introduce the analysis description language concept and summarize the current efforts ongoing to develop such languages and tools to use them in LHC analyses. △ Less

Submitted 3 November, 2020; originally announced November 2020.

Comments: Accepted contribution to the proceedings of The 8th Annual Conference on Large Hadron Collider Physics, LHCP2020, 25-30 May, 2020, online

Journal ref: Proceedings of Science, PoS(LHCP2020)065

HL-LHC Computing Review: Common Tools and Community Software

Authors: HEP Software Foundation, :, Thea Aarrestad, Simone Amoroso, Markus Julian Atkinson, Joshua Bendavid, Tommaso Boccali, Andrea Bocci, Andy Buckley, Matteo Cacciari, Paolo Calafiura, Philippe Canal, Federico Carminati, Taylor Childers, Vitaliano Ciulli, Gloria Corti, Davide Costanzo, Justin Gage Dezoort, Caterina Doglioni, Javier Mauricio Duarte, Agnieszka Dziurda, Peter Elmer, Markus Elsing, V. Daniel Elvira, Giulio Eulisse , et al. (85 additional authors not shown)

Abstract: Common and community software packages, such as ROOT, Geant4 and event generators have been a key part of the LHC's success so far and continued development and optimisation will be critical in the future. The challenges are driven by an ambitious physics programme, notably the LHC accelerator upgrade to high-luminosity, HL-LHC, and the corresponding detector upgrades of ATLAS and CMS. In this doc… ▽ More Common and community software packages, such as ROOT, Geant4 and event generators have been a key part of the LHC's success so far and continued development and optimisation will be critical in the future. The challenges are driven by an ambitious physics programme, notably the LHC accelerator upgrade to high-luminosity, HL-LHC, and the corresponding detector upgrades of ATLAS and CMS. In this document we address the issues for software that is used in multiple experiments (usually even more widely than ATLAS and CMS) and maintained by teams of developers who are either not linked to a particular experiment or who contribute to common software within the context of their experiment activity. We also give space to general considerations for future software and projects that tackle upcoming challenges, no matter who writes it, which is an area where community convergence on best practice is extremely useful. △ Less

Submitted 31 August, 2020; originally announced August 2020.

Comments: 40 pages contribution to Snowmass 2021

Report number: HSF-DOC-2020-01

Coffea -- Columnar Object Framework For Effective Analysis

Authors: Nicholas Smith, Lindsey Gray, Matteo Cremonesi, Bo Jayatilaka, Oliver Gutsche, Allison Hall, Kevin Pedro, Maria Acosta, Andrew Melo, Stefano Belforte, Jim Pivarski

Abstract: The coffea framework provides a new approach to High-Energy Physics analysis, via columnar operations, that improves time-to-insight, scalability, portability, and reproducibility of analysis. It is implemented with the Python programming language, the scientific python package ecosystem, and commodity big data technologies. To achieve this suite of improvements across many use cases, coffea takes… ▽ More The coffea framework provides a new approach to High-Energy Physics analysis, via columnar operations, that improves time-to-insight, scalability, portability, and reproducibility of analysis. It is implemented with the Python programming language, the scientific python package ecosystem, and commodity big data technologies. To achieve this suite of improvements across many use cases, coffea takes a factorized approach, separating the analysis implementation and data delivery scheme. All analysis operations are implemented using the NumPy or awkward-array packages which are wrapped to yield user code whose purpose is quickly intuited. Various data delivery schemes are wrapped into a common front-end which accepts user inputs and code, and returns user defined outputs. We will discuss our experience in implementing analysis of CMS data using the coffea framework along with a discussion of the user experience and future directions. △ Less

Submitted 6 August, 2021; v1 submitted 28 August, 2020; originally announced August 2020.

Comments: As presented at CHEP 2019

Journal ref: EPJ Web of Conferences 245, 06012 (2020)

Track Seeding and Labelling with Embedded-space Graph Neural Networks

Authors: Nicholas Choma, Daniel Murnane, Xiangyang Ju, Paolo Calafiura, Sean Conlon, Steven Farrell, Prabhat, Giuseppe Cerati, Lindsey Gray, Thomas Klijnsma, Jim Kowalkowski, Panagiotis Spentzouris, Jean-Roch Vlimant, Maria Spiropulu, Adam Aurisano, V Hewes, Aristeidis Tsaris, Kazuhiro Terao, Tracy Usher

Abstract: To address the unprecedented scale of HL-LHC data, the Exa.TrkX project is investigating a variety of machine learning approaches to particle track reconstruction. The most promising of these solutions, graph neural networks (GNN), process the event as a graph that connects track measurements (detector hits corresponding to nodes) with candidate line segments between the hits (corresponding to edg… ▽ More To address the unprecedented scale of HL-LHC data, the Exa.TrkX project is investigating a variety of machine learning approaches to particle track reconstruction. The most promising of these solutions, graph neural networks (GNN), process the event as a graph that connects track measurements (detector hits corresponding to nodes) with candidate line segments between the hits (corresponding to edges). Detector information can be associated with nodes and edges, enabling a GNN to propagate the embedded parameters around the graph and predict node-, edge- and graph-level observables. Previously, message-passing GNNs have shown success in predicting doublet likelihood, and we here report updates on the state-of-the-art architectures for this task. In addition, the Exa.TrkX project has investigated innovations in both graph construction, and embedded representations, in an effort to achieve fully learned end-to-end track finding. Hence, we present a suite of extensions to the original model, with encouraging results for hitgraph classification. In addition, we explore increased performance by constructing graphs from learned representations which contain non-linear metric structure, allowing for efficient clustering and neighborhood queries of data points. We demonstrate how this framework fits in with both traditional clustering pipelines, and GNN approaches. The embedded graphs feed into high-accuracy doublet and triplet classifiers, or can be used as an end-to-end track classifier by clustering in an embedded space. A set of post-processing methods improve performance with knowledge of the detector physics. Finally, we present numerical results on the TrackML particle tracking challenge dataset, where our framework shows favorable results in both seeding and track finding. △ Less

Submitted 30 June, 2020; originally announced July 2020.

Comments: Proceedings submission in Connecting the Dots Workshop 2020, 10 pages

Graph Neural Networks for Particle Reconstruction in High Energy Physics detectors

Authors: Xiangyang Ju, Steven Farrell, Paolo Calafiura, Daniel Murnane, Prabhat, Lindsey Gray, Thomas Klijnsma, Kevin Pedro, Giuseppe Cerati, Jim Kowalkowski, Gabriel Perdue, Panagiotis Spentzouris, Nhan Tran, Jean-Roch Vlimant, Alexander Zlokapa, Joosep Pata, Maria Spiropulu, Sitong An, Adam Aurisano, V Hewes, Aristeidis Tsaris, Kazuhiro Terao, Tracy Usher

Abstract: Pattern recognition problems in high energy physics are notably different from traditional machine learning applications in computer vision. Reconstruction algorithms identify and measure the kinematic properties of particles produced in high energy collisions and recorded with complex detector systems. Two critical applications are the reconstruction of charged particle trajectories in tracking d… ▽ More Pattern recognition problems in high energy physics are notably different from traditional machine learning applications in computer vision. Reconstruction algorithms identify and measure the kinematic properties of particles produced in high energy collisions and recorded with complex detector systems. Two critical applications are the reconstruction of charged particle trajectories in tracking detectors and the reconstruction of particle showers in calorimeters. These two problems have unique challenges and characteristics, but both have high dimensionality, high degree of sparsity, and complex geometric layouts. Graph Neural Networks (GNNs) are a relatively new class of deep learning architectures which can deal with such data effectively, allowing scientists to incorporate domain knowledge in a graph structure and learn powerful representations leveraging that structure to identify patterns of interest. In this work we demonstrate the applicability of GNNs to these two diverse particle reconstruction problems. △ Less

Submitted 3 June, 2020; v1 submitted 25 March, 2020; originally announced March 2020.

Comments: Presented at NeurIPS 2019 Workshop "Machine Learning and the Physical Sciences"

A Dynamic Reduction Network for Point Clouds

Authors: Lindsey Gray, Thomas Klijnsma, Shamik Ghosh

Abstract: Classifying whole images is a classic problem in machine learning, and graph neural networks are a powerful methodology to learn highly irregular geometries. It is often the case that certain parts of a point cloud are more important than others when determining overall classification. On graph structures this started by pooling information at the end of convolutional filters, and has evolved to a… ▽ More Classifying whole images is a classic problem in machine learning, and graph neural networks are a powerful methodology to learn highly irregular geometries. It is often the case that certain parts of a point cloud are more important than others when determining overall classification. On graph structures this started by pooling information at the end of convolutional filters, and has evolved to a variety of staged pooling techniques on static graphs. In this paper, a dynamic graph formulation of pooling is introduced that removes the need for predetermined graph structure. It achieves this by dynamically learning the most important relationships between data via an intermediate clustering. The network architecture yields interesting results considering representation size and efficiency. It also adapts easily to a large number of tasks from image classification to energy regression in high energy particle physics. △ Less

Submitted 17 March, 2020; originally announced March 2020.

Comments: 4 pages, 2 figures, to be updated

Dusty Stellar Birth and Death in the Metal-Poor Galaxy NGC 6822

Authors: Alec S. Hirschauer, Laurin Gray, Margaret Meixner, Olivia C. Jones, Sundar Srinivasan, Martha L. Boyer, B. A. Sargent

Abstract: The nearby ($\sim$500 kpc) metal-poor ([Fe/H] $\approx$ -1.2; $Z$ $\approx$ 30% $Z_{\odot}$) star-forming galaxy NGC 6822 has a metallicity similar to systems at the epoch of peak star formation. Through identification and study of dusty and dust-producing stars, it is therefore a useful laboratory to shed light on the dust life cycle in the early Universe. We present a catalog of sources combinin… ▽ More The nearby ($\sim$500 kpc) metal-poor ([Fe/H] $\approx$ -1.2; $Z$ $\approx$ 30% $Z_{\odot}$) star-forming galaxy NGC 6822 has a metallicity similar to systems at the epoch of peak star formation. Through identification and study of dusty and dust-producing stars, it is therefore a useful laboratory to shed light on the dust life cycle in the early Universe. We present a catalog of sources combining near- and mid-IR photometry from the United Kingdom Infrared Telescope (UKIRT; $J$, $H$, and $K$) and the $Spitzer$ $Space$ $Telescope$ (IRAC 3.6, 4.5, 5.8, and 8.0 $μ$m and MIPS 24 $μ$m). This catalog is employed to identify dusty and evolved stars in NGC 6822 utilizing three color-magnitude diagrams (CMDs). With diagnostic CMDs covering a wavelength range spanning the near- and mid-IR, we develop color cuts using kernel density estimate (KDE) techniques to identify dust-producing evolved stars, including red supergiant (RSG) and thermally-pulsing asymptotic giant branch (TP-AGB) star candidates. In total, we report 1,292 RSG candidates, 1,050 oxygen-rich AGB star candidates, and 560 carbon-rich AGB star candidates with high confidence in NGC 6822. Our analysis of the AGB stars suggests a robust population inhabiting the central stellar bar of the galaxy, with a measured global stellar metallicity of [Fe/H] = -1.286 $\pm$ 0.095, consistent with previous studies. In addition, we identify 277 young stellar object (YSO) candidates. The detection of a large number of YSO candidates within a centrally-located, compact cluster reveals the existence of an embedded, high-mass star-formation region that has eluded previous detailed study. Spitzer I appears to be younger and more active than the other prominent star-forming regions in the galaxy. △ Less

Submitted 27 February, 2020; originally announced February 2020.

Comments: Accepted for publication in The Astrophysical Journal; 27 pages, 13 figures, 12 tables (master catalog will be available from publisher)

Response to NITRD, NCO, NSF Request for Information on "Update to the 2016 National Artificial Intelligence Research and Development Strategic Plan"

Authors: J. Amundson, J. Annis, C. Avestruz, D. Bowring, J. Caldeira, G. Cerati, C. Chang, S. Dodelson, D. Elvira, A. Farahi, K. Genser, L. Gray, O. Gutsche, P. Harris, J. Kinney, J. B. Kowalkowski, R. Kutschke, S. Mrenna, B. Nord, A. Para, K. Pedro, G. N. Perdue, A. Scheinker, P. Spentzouris, J. St. John , et al. (5 additional authors not shown)

Abstract: We present a response to the 2018 Request for Information (RFI) from the NITRD, NCO, NSF regarding the "Update to the 2016 National Artificial Intelligence Research and Development Strategic Plan." Through this document, we provide a response to the question of whether and how the National Artificial Intelligence Research and Development Strategic Plan (NAIRDSP) should be updated from the perspect… ▽ More We present a response to the 2018 Request for Information (RFI) from the NITRD, NCO, NSF regarding the "Update to the 2016 National Artificial Intelligence Research and Development Strategic Plan." Through this document, we provide a response to the question of whether and how the National Artificial Intelligence Research and Development Strategic Plan (NAIRDSP) should be updated from the perspective of Fermilab, America's premier national laboratory for High Energy Physics (HEP). We believe the NAIRDSP should be extended in light of the rapid pace of development and innovation in the field of Artificial Intelligence (AI) since 2016, and present our recommendations below. AI has profoundly impacted many areas of human life, promising to dramatically reshape society --- e.g., economy, education, science --- in the coming years. We are still early in this process. It is critical to invest now in this technology to ensure it is safe and deployed ethically. Science and society both have a strong need for accuracy, efficiency, transparency, and accountability in algorithms, making investments in scientific AI particularly valuable. Thus far the US has been a leader in AI technologies, and we believe as a national Laboratory it is crucial to help maintain and extend this leadership. Moreover, investments in AI will be important for maintaining US leadership in the physical sciences. △ Less

Submitted 4 November, 2019; originally announced November 2019.

Report number: FERMILAB-FN-1092-SCD

An in-plane hexagonal antiferromagnet in the Cu-Mn-As system, Cu$_{0.82}$Mn$_{1.18}$As

Authors: Manohar H. Karigerasi, Kisung Kang, Arun Ramanathan, Danielle L. Gray, Matthias D. Frontzek, Huibo Cao, André Schleife, Daniel P. Shoemaker

Abstract: We report the single-crystal growth and characterization of a new hexagonal phase, Cu$_{0.82}$Mn$_{1.18}$As, in the Cu-Mn-As system. This compound contains the same square-pyramidal MnAs$_5$ units as the tetragonal and orthorhombic polymorphs of CuMnAs. Calorimetry, magnetometry, and neutron diffraction measurements reveal antiferromagnetic ordering at 270 K. The magnetic structure consists of a t… ▽ More We report the single-crystal growth and characterization of a new hexagonal phase, Cu$_{0.82}$Mn$_{1.18}$As, in the Cu-Mn-As system. This compound contains the same square-pyramidal MnAs$_5$ units as the tetragonal and orthorhombic polymorphs of CuMnAs. Calorimetry, magnetometry, and neutron diffraction measurements reveal antiferromagnetic ordering at 270 K. The magnetic structure consists of a triangular arrangement of spins in the $ab$ plane. Hexagonal Cu$_{0.82}$Mn$_{1.18}$As shows resistivity that varies only weakly from 5 K to 300 K, and is many times higher than tetragonal CuMnAs, indicative of a strongly-scattering metal. First-principles calculations confirm the metallic band structure with a small density of states at the Fermi energy. The neutron-refined magnetic ground state is close to the computationally-determined minimum energy configuration. This compound should serve as a clear control when disentangling the effects of current-driven Néel switching of metallic antiferromagnets since it exhibits in-plane spins but the magnetic ordering does not break degeneracy along the $a$ and $b$ directions, unlike tetragonal CuMnAs. △ Less

Submitted 23 November, 2019; v1 submitted 5 August, 2019; originally announced August 2019.

Comments: 7 pages, 8 figures; Added Cu-Mn-As phase diagram, updated 1 figure and added some more text

Journal ref: Phys. Rev. Materials 3, 111402 (2019)

Boundary Integral Analysis for the Non-homogeneous 3D Stokes Equation

Authors: L. J. Gray, Jas Jakowski, M. N. J. Moore, Wen**g Ye

Abstract: A regular-grid volume-integration algorithm is developed for the non-homogeneous 3D Stokes equation. Based upon the observation that the Stokeslet ${\mathcal U}$ is the Laplacian of a function ${\mathcal H}$, the volume integral is reformulated as a simple boundary integral, plus a remainder domain integral. The modified source term in this remainder integral is everywhere zero on the boundary and… ▽ More A regular-grid volume-integration algorithm is developed for the non-homogeneous 3D Stokes equation. Based upon the observation that the Stokeslet ${\mathcal U}$ is the Laplacian of a function ${\mathcal H}$, the volume integral is reformulated as a simple boundary integral, plus a remainder domain integral. The modified source term in this remainder integral is everywhere zero on the boundary and can therefore be continuously extended as zero to a regular grid covering the domain. The volume integral can then be evaluated on the grid. Applying this method to the Navier-Stokes equations will require obtaining velocity gradients, and thus an efficient algorithm for post-processing these derivatives is also discussed. To validate the numerical implementation, test results employing a linear element Galerkin approximation are presented. △ Less

Submitted 3 December, 2018; originally announced December 2018.

A Phase Variable Approach for Improved Rhythmic and Non-Rhythmic Control of a Powered Knee-Ankle Prosthesis

Authors: Siavash Rezazadeh, David Quintero, Nikhil Divekar, Emma Reznick, Leslie Gray, Robert D. Gregg

Abstract: Although there has been recent progress in control of multi-joint prosthetic legs for rhythmic tasks such as walking, control of these systems for non-rhythmic motions and general real-world maneuvers is still an open problem. In this article, we develop a new controller that is capable of both rhythmic (constant-speed) walking, transitions between speeds and/or tasks, and some common volitional l… ▽ More Although there has been recent progress in control of multi-joint prosthetic legs for rhythmic tasks such as walking, control of these systems for non-rhythmic motions and general real-world maneuvers is still an open problem. In this article, we develop a new controller that is capable of both rhythmic (constant-speed) walking, transitions between speeds and/or tasks, and some common volitional leg motions. We introduce a new piecewise holonomic phase variable, which, through a finite state machine, forms the basis of our controller. The phase variable is constructed by measuring the thigh angle, and the transitions in the finite state machine are formulated through sensing foot contact along with attributes of a nominal reference gait trajectory. The controller was implemented on a powered knee-ankle prosthesis and tested with a transfemoral amputee subject, who successfully performed a wide range of rhythmic and non-rhythmic tasks, including slow and fast walking, quick start and stop, backward walking, walking over obstacles, and kicking a soccer ball. Use of the powered leg resulted in clinically significant reductions in amputee compensations for rhythmic tasks (including vaulting and hip circumduction) when compared to use of the take-home passive leg. In addition, considerable improvements were also observed in the performance for non-rhythmic tasks. The proposed approach is expected to provide a better understanding of rhythmic and non-rhythmic motions in a unified framework, which in turn can lead to more reliable control of multi-joint prostheses for a wider range of real-world tasks. △ Less

Submitted 4 August, 2019; v1 submitted 13 November, 2018; originally announced November 2018.

Novel deep learning methods for track reconstruction

Authors: Steven Farrell, Paolo Calafiura, Mayur Mudigonda, Prabhat, Dustin Anderson, Jean-Roch Vlimant, Stephan Zheng, Josh Bendavid, Maria Spiropulu, Giuseppe Cerati, Lindsey Gray, Jim Kowalkowski, Panagiotis Spentzouris, Aristeidis Tsaris

Abstract: For the past year, the HEP.TrkX project has been investigating machine learning solutions to LHC particle track reconstruction problems. A variety of models were studied that drew inspiration from computer vision applications and operated on an image-like representation of tracking detector data. While these approaches have shown some promise, image-based methods face challenges in scaling up to r… ▽ More For the past year, the HEP.TrkX project has been investigating machine learning solutions to LHC particle track reconstruction problems. A variety of models were studied that drew inspiration from computer vision applications and operated on an image-like representation of tracking detector data. While these approaches have shown some promise, image-based methods face challenges in scaling up to realistic HL-LHC data due to high dimensionality and sparsity. In contrast, models that can operate on the spacepoint representation of track measurements ("hits") can exploit the structure of the data to solve tasks efficiently. In this paper we will show two sets of new deep learning models for reconstructing tracks using space-point data arranged as sequences or connected graphs. In the first set of models, Recurrent Neural Networks (RNNs) are used to extrapolate, build, and evaluate track candidates akin to Kalman Filter algorithms. Such models can express their own uncertainty when trained with an appropriate likelihood loss function. The second set of models use Graph Neural Networks (GNNs) for the tasks of hit classification and segment classification. These models read a graph of connected hits and compute features on the nodes and edges. They adaptively learn which hit connections are important and which are spurious. The models are scaleable with simple architecture and relatively few parameters. Results for all models will be presented on ACTS generic detector simulated data. △ Less

Submitted 14 October, 2018; originally announced October 2018.

Comments: CTD 2018 proceedings

Machine Learning in High Energy Physics Community White Paper

Authors: Kim Albertsson, Piero Altoe, Dustin Anderson, John Anderson, Michael Andrews, Juan Pedro Araque Espinosa, Adam Aurisano, Laurent Basara, Adrian Bevan, Wahid Bhimji, Daniele Bonacorsi, Bjorn Burkle, Paolo Calafiura, Mario Campanelli, Louis Capps, Federico Carminati, Stefano Carrazza, Yi-fan Chen, Taylor Childers, Yann Coadou, Elias Coniavitis, Kyle Cranmer, Claire David, Douglas Davis, Andrea De Simone , et al. (103 additional authors not shown)

Abstract: Machine learning has been applied to several problems in particle physics research, beginning with applications to high-level physics analysis in the 1990s and 2000s, followed by an explosion of applications in particle and event identification and reconstruction in the 2010s. In this document we discuss promising future research and development areas for machine learning in particle physics. We d… ▽ More Machine learning has been applied to several problems in particle physics research, beginning with applications to high-level physics analysis in the 1990s and 2000s, followed by an explosion of applications in particle and event identification and reconstruction in the 2010s. In this document we discuss promising future research and development areas for machine learning in particle physics. We detail a roadmap for their implementation, software and hardware resource requirements, collaborative initiatives with the data science community, academia and industry, and training the particle physics community in data science. The main objective of the document is to connect and motivate these areas of research and development with the physics drivers of the High-Luminosity Large Hadron Collider and future neutrino experiments and identify the resource needs for their implementation. Additionally we identify areas where collaboration with external communities will be of great benefit. △ Less

Submitted 16 May, 2019; v1 submitted 8 July, 2018; originally announced July 2018.

Comments: Editors: Sergei Gleyzer, Paul Seyfert and Steven Schramm

Searching for Inflow Towards Massive Starless Clump Candidates Identified in the Bolocam Galactic Plane Survey

Authors: Jenny Calahan, Yancy Shirley, Brian Svoboda, Elizabeth Ivanov, Jonathan Schmid, Anna Pulley, Jennifier Lautenbach, Nicole Zawadzki, Christopher Bullivant, Claire Cook, Laurin Gray, Andrew Henrici, Massimo Pascale, Carter Bosse, Quadry Chance, Sarah Choi, Marina Dunn, Ramon Jame-Frias, Ian Kearsley, Joseph Kelledy, Collin Lewin, Qasim Mahmood, Scott McKinley, Adriana Mitchell, Daniel Robinson

Abstract: Recent Galactic plane surveys of dust continuum emission at long wavelengths have identified a population of dense, massive clumps with no evidence for on-going star formation. These massive starless clump candidates are excellent sites to search for the initial phases of massive star formation before the feedback from massive star formation effects the clump. In this study, we search for the spec… ▽ More Recent Galactic plane surveys of dust continuum emission at long wavelengths have identified a population of dense, massive clumps with no evidence for on-going star formation. These massive starless clump candidates are excellent sites to search for the initial phases of massive star formation before the feedback from massive star formation effects the clump. In this study, we search for the spectroscopic signature of inflowing gas toward starless clumps, some of which are massive enough to form a massive star. We observed 101 starless clump candidates identified in the Bolocam Galactic Plane Survey (BGPS) in HCO+ J = 1-0 using the 12m Arizona Radio Observatory telescope. We find a small blue excess of E = (Nblue - Nred)/Ntotal = 0.03 for the complete survey. We identified 6 clumps that are good candidates for inflow motion and used a radiative transfer model to calculate mass inflow rates that range from 500 - 2000 M /Myr. If the observed line profiles are indeed due to large-scale inflow motions, then these clumps will typically double their mass on a free fall time. Our survey finds that massive BGPS starless clump candidates with inflow signatures in HCO+ J = 1-0 are rare throughout our Galaxy. △ Less

Submitted 30 April, 2018; originally announced May 2018.

Comments: 14 pages, 9 figures

Initial performance studies of a general-purpose detector for multi-TeV physics at a 100 TeV pp collider

Authors: S. V. Chekanov, M. Beydler, A. V. Kotwal, L. Gray, S. Sen, N. V. Tran, S. -S. Yu, J. Zuzelski

Abstract: This paper describes simulations of detector response to multi-TeV physics at the Future Circular Collider (FCC-hh) or Super proton-proton Collider (SppC) which aim to collide proton beams with a centre-of-mass energy of 100 TeV. The unprecedented energy regime of these future experiments imposes new requirements on detector technologies which can be studied using the detailed GEANT4 simulations p… ▽ More This paper describes simulations of detector response to multi-TeV physics at the Future Circular Collider (FCC-hh) or Super proton-proton Collider (SppC) which aim to collide proton beams with a centre-of-mass energy of 100 TeV. The unprecedented energy regime of these future experiments imposes new requirements on detector technologies which can be studied using the detailed GEANT4 simulations presented in this paper. The initial performance of a detector designed for physics studies at the FCC-hh or SppC experiments is described with an emphasis on measurements of single particles up to 33 TeV in transverse momentum. The reconstruction of hadronic jets has also been studied in the transverse momentum range from 50 GeV to 26 TeV. The granularity requirements for calorimetry are investigated using the two-particle spatial resolution achieved for hadron showers. △ Less

Submitted 9 June, 2017; v1 submitted 21 December, 2016; originally announced December 2016.

Comments: 26 pages, 18 figures

Report number: ANL-HEP-132458, FERMILAB-PUB-17-064-CMS-E

Journal ref: JINST 12 (2017) P06009

Study Of Boosted W-Jets And Higgs-Jets With the SiFCC Detector

Authors: Shin-Shan Yu, Sergei Chekanov, Lindsey Gray, Ashutosh Kotwal, Sourav Sen, Nhan Viet Tran

Abstract: We study the detector performance in the reconstruction of hadronically-decaying W bosons and Higgs bosons at very high energy proton colliders using a full GEANT4 simulation of the SiFCC detector. The W and Higgs bosons carry transverse momentum in the multi-TeV range, which results in collimated decay products that are reconstructed as a single jet. We present a measurement of the energy respons… ▽ More We study the detector performance in the reconstruction of hadronically-decaying W bosons and Higgs bosons at very high energy proton colliders using a full GEANT4 simulation of the SiFCC detector. The W and Higgs bosons carry transverse momentum in the multi-TeV range, which results in collimated decay products that are reconstructed as a single jet. We present a measurement of the energy response and resolution of boosted W-jets and Higgs-jets and show the separation of two sub-jets within the boosted boson jet. △ Less

Submitted 3 November, 2016; originally announced November 2016.

Comments: Proceedings for the 38th International Conference on High Energy Physics, 3-10 August 2016, Chicago, USA (6 pages, 8 figures)

Computer keyboard interaction as an indicator of early Parkinson's disease

Authors: L. Giancardo, A. Sánchez-Ferro, T. Arroyo-Gallego, I. Butterworth, C. S. Mendoza, P. Montero, M. Matarazzo, A. Obeso, M. L. Gray, San José Estépar

Abstract: Parkinson's disease (PD) is a slowly progressing neurodegenerative disease with early manifestation of motor signs. Objective measurements of motor signs are of vital importance for diagnosing, monitoring and develo** disease modifying therapies, particularly for the early stages of the disease when putative neuroprotective treatments could stop neurodegeneration. Current medical practice has li… ▽ More Parkinson's disease (PD) is a slowly progressing neurodegenerative disease with early manifestation of motor signs. Objective measurements of motor signs are of vital importance for diagnosing, monitoring and develo** disease modifying therapies, particularly for the early stages of the disease when putative neuroprotective treatments could stop neurodegeneration. Current medical practice has limited tools to routinely monitor PD motor signs with enough frequency and without undue burden for patients and the healthcare system. In this paper, we present data indicating that the routine interaction with computer keyboards can be used to detect motor signs in the early stages of PD. We explore a solution that measures the key hold times (the time required to press and release a key) during the normal use of a computer without any change in hardware and converts it to a PD motor index. This is achieved by the automatic discovery of patterns in the time series of key hold times using an ensemble regression algorithm. This new approach discriminated early PD groups from controls with an AUC = 0.81 (n = 42/43; mean age = 59.0/60.1; women = 43%/60%;PD/controls). The performance was comparable or better than two other quantitative motor performance tests used clinically: alternating finger tap** (AUC = 0.75) and single key tap** (AUC = 0.61). △ Less

Submitted 5 October, 2016; v1 submitted 28 April, 2016; originally announced April 2016.

Comments: Available at: http://www.nature.com/articles/srep34468

ACM Class: J.3; I.2.1

Journal ref: Scientific Reports 6, Article number: 34468 (2016)

Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data

Authors: The CMS, LHCb Collaborations, :, V. Khachatryan, A. M. Sirunyan, A. Tumasyan, W. Adam, T. Bergauer, M. Dragicevic, J. Erö, M. Friedl, R. Frühwirth, V. M. Ghete, C. Hartl, N. Hörmann, J. Hrubec, M. Jeitler, W. Kiesenhofer, V. Knünz, M. Krammer, I. Krätschmer, D. Liko, I. Mikulec, D. Rabady, B. Rahbaran , et al. (2807 additional authors not shown)

Abstract: A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta… ▽ More A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM. △ Less

Submitted 17 August, 2015; v1 submitted 17 November, 2014; originally announced November 2014.

Comments: Correspondence should be addressed to [email protected]

Report number: CERN-PH-EP-2014-220, CMS-BPH-13-007, LHCb-PAPER-2014-049

Journal ref: Nature 522, 68-72 (04 June 2015)

Extreme paths in oriented 2D Percolation

Authors: E. D. Andjel, L. F. Gray

Abstract: A useful result about leftmost and rightmost paths in two dimensional bond percolation is proved. This result was introduced without proof in \cite{G} in the context of the contact process in continuous time. As discussed here, it also holds for several related models, including the discrete time contact process and two dimensional site percolation. Among the consequences are a natural monotonicit… ▽ More A useful result about leftmost and rightmost paths in two dimensional bond percolation is proved. This result was introduced without proof in \cite{G} in the context of the contact process in continuous time. As discussed here, it also holds for several related models, including the discrete time contact process and two dimensional site percolation. Among the consequences are a natural monotonicity in the probability of percolation between different sites and a somewhat counter-intuitive correlation inequality. △ Less

Submitted 4 July, 2015; v1 submitted 4 November, 2014; originally announced November 2014.

MSC Class: 60K35

Stability of adversarial Markov chains, with an application to adaptive MCMC algorithms

Authors: Radu V. Craiu, Lawrence Gray, Krzysztof Łatuszyński, Neal Madras, Gareth O. Roberts, Jeffrey S. Rosenthal

Abstract: We consider whether ergodic Markov chains with bounded step size remain bounded in probability when their transitions are modified by an adversary on a bounded subset. We provide counterexamples to show that the answer is no in general, and prove theorems to show that the answer is yes under various additional assumptions. We then use our results to prove convergence of various adaptive Markov cha… ▽ More We consider whether ergodic Markov chains with bounded step size remain bounded in probability when their transitions are modified by an adversary on a bounded subset. We provide counterexamples to show that the answer is no in general, and prove theorems to show that the answer is yes under various additional assumptions. We then use our results to prove convergence of various adaptive Markov chain Monte Carlo algorithms. △ Less

Submitted 5 November, 2015; v1 submitted 16 March, 2014; originally announced March 2014.

Comments: Published at http://dx.doi.org/10.1214/14-AAP1083 in the Annals of Applied Probability (http://www.imstat.org/aap/) by the Institute of Mathematical Statistics (http://www.imstat.org)

Report number: IMS-AAP-AAP1083

Journal ref: Annals of Applied Probability 2015, Vol. 25, No. 6, 3592-3623