-
Derivation of Jacobian matrices for the error propagation of charged particles traversing magnetic fields and materials
Authors:
Beomki Yeo,
Heather Gray,
Andreas Salzburger,
Stephen Nicholas Swatman
Abstract:
In high-energy physics experiments, the trajectories of charged particles are reconstructed using track reconstruction algorithms. Such algorithms need to both identify the set of measurements from a single charged particle and to fit the parameters by propagating tracks along the measurements. The propagation of the track parameter uncertainties is an important component in the track fitting to g…
▽ More
In high-energy physics experiments, the trajectories of charged particles are reconstructed using track reconstruction algorithms. Such algorithms need to both identify the set of measurements from a single charged particle and to fit the parameters by propagating tracks along the measurements. The propagation of the track parameter uncertainties is an important component in the track fitting to get the optimal precision in the fitted parameters. The error propagation is performed at the surface intersections by calculating a Jacobian matrix corresponding to the surface-to-surface transport. This paper derives the Jacobian matrix in a general manner to harmonize with semi-analytical numerical integration methods developed for inhomogeneous magnetic fields and materials. The Jacobian and transported covariance matrices are validated by simulating the charged particles between two surfaces and comparing with the results of numerical methods.
△ Less
Submitted 25 March, 2024;
originally announced March 2024.
-
TASI 2022 lectures on LHC experiments
Authors:
Heather M. Gray
Abstract:
The field of experimental particle physics studies the fundamental particles and forces that constitute matter and radiation. Frequently the experimental tools used to enable this study are accelerators and detectors. The Large Hadron Collider (LHC) is the highest energy proton-proton accelerator currently operating and where the ATLAS and CMS collaboration discovered and are currently studying th…
▽ More
The field of experimental particle physics studies the fundamental particles and forces that constitute matter and radiation. Frequently the experimental tools used to enable this study are accelerators and detectors. The Large Hadron Collider (LHC) is the highest energy proton-proton accelerator currently operating and where the ATLAS and CMS collaboration discovered and are currently studying the properties of the Higgs boson. These notes provide a short introduction to accelerators and detectors using the LHC and its detectors as examples. The detector section will focus on two types of detectors extensively used today: tracking detectors and calorimeters. The notes will then discuss the algorithms used to process the information from the detectors and how that information is used for physics analysis using the search for the decay of the Higgs boson to bottom quarks.
△ Less
Submitted 4 July, 2023;
originally announced July 2023.
-
Detector R&D needs for the next generation $e^+e^-$ collider
Authors:
A. Apresyan,
M. Artuso,
J. Brau,
H. Chen,
M. Demarteau,
Z. Demiragli,
S. Eno,
J. Gonski,
P. Grannis,
H. Gray,
O. Gutsche,
C. Haber,
M. Hohlmann,
J. Hirschauer,
G. Iakovidis,
K. Jakobs,
A. J. Lankford,
C. Pena,
S. Rajagopalan,
J. Strube,
C. Tully,
C. Vernieri,
A. White,
G. W. Wilson,
S. Xie
, et al. (3 additional authors not shown)
Abstract:
The 2021 Snowmass Energy Frontier panel wrote in its final report "The realization of a Higgs factory will require an immediate, vigorous and targeted detector R&D program". Both linear and circular $e^+e^-$ collider efforts have developed a conceptual design for their detectors and are aggressively pursuing a path to formalize these detector concepts. The U.S. has world-class expertise in particl…
▽ More
The 2021 Snowmass Energy Frontier panel wrote in its final report "The realization of a Higgs factory will require an immediate, vigorous and targeted detector R&D program". Both linear and circular $e^+e^-$ collider efforts have developed a conceptual design for their detectors and are aggressively pursuing a path to formalize these detector concepts. The U.S. has world-class expertise in particle detectors, and is eager to play a leading role in the next generation $e^+e^-$ collider, currently slated to become operational in the 2040s. It is urgent that the U.S. organize its efforts to provide leadership and make significant contributions in detector R&D. These investments are necessary to build and retain the U.S. expertise in detector R&D and future projects, enable significant contributions during the construction phase and maintain its leadership in the Energy Frontier regardless of the choice of the collider project. In this document, we discuss areas where the U.S. can and must play a leading role in the conceptual design and R&D for detectors for $e^+e^-$ colliders.
△ Less
Submitted 26 June, 2023; v1 submitted 23 June, 2023;
originally announced June 2023.
-
Exploration of different parameter optimization algorithms within the context of ACTS software framework
Authors:
Rocky Bala Garg,
Elyssa Hofgard,
Lauren Tompkins,
Heather Gray
Abstract:
Particle track reconstruction, in which the trajectories of charged particles are determined, is a critical and time consuming component of the full event reconstruction chain. The underlying software is complex and consists of a number of mathematically intense algorithms, each dealing with a particular tracking sub-process. These algorithms have many input parameters that need to be supplied in…
▽ More
Particle track reconstruction, in which the trajectories of charged particles are determined, is a critical and time consuming component of the full event reconstruction chain. The underlying software is complex and consists of a number of mathematically intense algorithms, each dealing with a particular tracking sub-process. These algorithms have many input parameters that need to be supplied in advance. However, it is difficult to determine the configuration of these parameters that produces the best performance. Currently, the input parameter values are decided on the basis of prior experience or by the use of brute force techniques. A parameter optimization approach that is able to automatically tune these parameters for high performance is greatly desirable. In the current work, we explore various machine learning based optimization methods to devise a suitable technique to optimize parameters in the complex track reconstruction environment. These methods are evaluated on the basis of a metric that targets high efficiency while kee** the duplicate and fake rates small. We focus on derivative free optimization approaches that can be applied to problems involving non-differentiable loss functions. For our studies, we consider the tracking algorithms defined within A Common Tracking Software (ACTS) framework. We test our methods using simulated data from ACTS software corresponding to the ACTS Generic detector and the ATLAS ITk detector geometries.
△ Less
Submitted 20 January, 2023; v1 submitted 1 November, 2022;
originally announced November 2022.
-
A Non-Linear Kalman Filter for track parameters estimation in High Energy Physics
Authors:
Xiaocong Ai,
Heather M. Gray,
Andreas Salzburger,
Nicholas Styles
Abstract:
The Kalman Filter is a widely used approach for the linear estimation of dynamical systems and is frequently employed within nuclear and particle physics experiments for the reconstruction of charged particle trajectories, known as tracks. Implementations of this formalism often make assumptions on the linearity of the underlying dynamic system and the Gaussian nature of the process noise, which i…
▽ More
The Kalman Filter is a widely used approach for the linear estimation of dynamical systems and is frequently employed within nuclear and particle physics experiments for the reconstruction of charged particle trajectories, known as tracks. Implementations of this formalism often make assumptions on the linearity of the underlying dynamic system and the Gaussian nature of the process noise, which is violated in many track reconstruction applications. This paper introduces an implementation of a Non-Linear Kalman Filter (NLKF) within the ACTS track reconstruction toolkit. The NLKF addresses the issue of non-linearity by using a set of representative sample points during its track state propagation. In a typical use case, the NLKF outperforms an Extended Kalman Filter in the accuracy and precision of the track parameter estimates obtained, with the increase in CPU time below a factor of two. It is therefore a promising approach for use in applications where precise estimation of track parameters is a key concern.
△ Less
Submitted 17 December, 2021;
originally announced December 2021.
-
Intermittent Signals and Planetary Days in SETI
Authors:
Robert H. Gray
Abstract:
Interstellar signals might be intermittent for many reasons, such as targeted sequential transmissions, or isotropic broadcasts that are not on continuously, or many other reasons. The time interval between such signals would be important, because searchers would need to observe for long enough to achieve an initial detection and possibly determine a period. This article suggests that: (1) the pow…
▽ More
Interstellar signals might be intermittent for many reasons, such as targeted sequential transmissions, or isotropic broadcasts that are not on continuously, or many other reasons. The time interval between such signals would be important, because searchers would need to observe for long enough to achieve an initial detection and possibly determine a period. This article suggests that: (1) the power requirements of interstellar transmissions could be reduced by orders of magnitude by strategies that would result in intermittent signals, and (2) planetary rotation might constrain some transmissions to be intermittent and in some cases to have the period of the source planet, and (3) signals constrained by planetary rotation might often have a cadence in the range of 10-25 hours, if the majority of planets in our solar system are taken as a guide. Extended observations might be needed to detect intermittent signals and are rarely used in SETI but are feasible, and seem appropriate when observing large concentrations of stars or following up on good candidate signals.
△ Less
Submitted 23 October, 2021; v1 submitted 12 September, 2021;
originally announced September 2021.
-
A Common Tracking Software Project
Authors:
Xiaocong Ai,
Corentin Allaire,
Noemi Calace,
Angéla Czirkos,
Irina Ene,
Markus Elsing,
Ralf Farkas,
Louis-Guillaume Gagnon,
Rocky Garg,
Paul Gessinger,
Hadrien Grasland,
Heather M. Gray,
Christian Gumpert,
Julia Hrdinka,
Benjamin Huth,
Moritz Kiehn,
Fabian Klimpel,
Attila Krasznahorkay,
Robert Langenberg,
Charles Leggett,
Joana Niermann,
Joseph D. Osborn,
Andreas Salzburger,
Bastian Schlag,
Lauren Tompkins
, et al. (7 additional authors not shown)
Abstract:
The reconstruction of the trajectories of charged particles, or track reconstruction, is a key computational challenge for particle and nuclear physics experiments. While the tuning of track reconstruction algorithms can depend strongly on details of the detector geometry, the algorithms currently in use by experiments share many common features. At the same time, the intense environment of the Hi…
▽ More
The reconstruction of the trajectories of charged particles, or track reconstruction, is a key computational challenge for particle and nuclear physics experiments. While the tuning of track reconstruction algorithms can depend strongly on details of the detector geometry, the algorithms currently in use by experiments share many common features. At the same time, the intense environment of the High-Luminosity LHC accelerator and other future experiments is expected to put even greater computational stress on track reconstruction software, motivating the development of more performant algorithms. We present here A Common Tracking Software (ACTS) toolkit, which draws on the experience with track reconstruction algorithms in the ATLAS experiment and presents them in an experiment-independent and framework-independent toolkit. It provides a set of high-level track reconstruction tools which are agnostic to the details of the detection technologies and magnetic field configuration and tested for strict thread-safety to support multi-threaded event processing. We discuss the conceptual design and technical implementation of ACTS, selected applications and performance of ACTS, and the lessons learned.
△ Less
Submitted 25 June, 2021;
originally announced June 2021.
-
A GPU-based Kalman Filter for Track Fitting
Authors:
Xiaocong Ai,
Georgiana Mania,
Heather M. Gray,
Michael Kuhn,
Nicholas Styles
Abstract:
Computing centres, including those used to process High-Energy Physics data and simulations, are increasingly providing significant fractions of their computing resources through hardware architectures other than x86 CPUs, with GPUs being a common alternative. GPUs can provide excellent computational performance at a good price point for tasks that can be suitably parallelized. Charged particle (t…
▽ More
Computing centres, including those used to process High-Energy Physics data and simulations, are increasingly providing significant fractions of their computing resources through hardware architectures other than x86 CPUs, with GPUs being a common alternative. GPUs can provide excellent computational performance at a good price point for tasks that can be suitably parallelized. Charged particle (track) reconstruction is a computationally expensive component of HEP data reconstruction, and thus needs to use available resources in an efficient way. In this paper, an implementation of Kalman filter-based track fitting using CUDA and running on GPUs is presented. This utilizes the ACTS (A Common Tracking Software) toolkit; an open source and experiment-independent toolkit for track reconstruction. The implementation details and parallelization approach are described, along with the specific challenges for such an implementation. Detailed performance benchmarking results are discussed, which show encouraging performance gains over a CPU-based implementation for representative configurations. Finally, a perspective on the challenges and future directions for these studies is outlined. These include more complex and realistic scenarios which can be studied, and anticipated developments to software frameworks and standards which may open up possibilities for greater flexibility and improved performance.
△ Less
Submitted 19 November, 2021; v1 submitted 4 May, 2021;
originally announced May 2021.
-
The Tracking Machine Learning challenge : Throughput phase
Authors:
Sabrina Amrouche,
Laurent Basara,
Paolo Calafiura,
Dmitry Emeliyanov,
Victor Estrade,
Steven Farrell,
Cécile Germain,
Vladimir Vava Gligorov,
Tobias Golling,
Sergey Gorbunov,
Heather Gray,
Isabelle Guyon,
Mikhail Hushchyn,
Vincenzo Innocente,
Moritz Kiehn,
Marcel Kunze,
Edward Moyse,
David Rousseau,
Andreas Salzburger,
Andrey Ustyuzhanin,
Jean-Roch Vlimant
Abstract:
This paper reports on the second "Throughput" phase of the Tracking Machine Learning (TrackML) challenge on the Codalab platform. As in the first "Accuracy" phase, the participants had to solve a difficult experimental problem linked to tracking accurately the trajectory of particles as e.g. created at the Large Hadron Collider (LHC): given O($10^5$) points, the participants had to connect them in…
▽ More
This paper reports on the second "Throughput" phase of the Tracking Machine Learning (TrackML) challenge on the Codalab platform. As in the first "Accuracy" phase, the participants had to solve a difficult experimental problem linked to tracking accurately the trajectory of particles as e.g. created at the Large Hadron Collider (LHC): given O($10^5$) points, the participants had to connect them into O($10^4$) individual groups that represent the particle trajectories which are approximated helical. While in the first phase only the accuracy mattered, the goal of this second phase was a compromise between the accuracy and the speed of inference. Both were measured on the Codalab platform where the participants had to upload their software. The best three participants had solutions with good accuracy and speed an order of magnitude faster than the state of the art when the challenge was designed. Although the core algorithms were less diverse than in the first phase, a diversity of techniques have been used and are described in this paper. The performance of the algorithms are analysed in depth and lessons derived.
△ Less
Submitted 14 May, 2021; v1 submitted 3 May, 2021;
originally announced May 2021.
-
Designing Building Blocks for Open-Ended Early Literacy Software
Authors:
Ivan Sysoev,
James H. Gray,
Susan Fine,
Deb Roy
Abstract:
English has a convoluted relationship between its pronunciation and spelling, which obscures its phonological structure for early literacy learners. This convoluted relationship has implications for early literacy software, particularly for open-ended, child-driven designs. A tempting way to bypass this issue is to use manipulables (blocks) that are directly tied to phonemes. However, creating pho…
▽ More
English has a convoluted relationship between its pronunciation and spelling, which obscures its phonological structure for early literacy learners. This convoluted relationship has implications for early literacy software, particularly for open-ended, child-driven designs. A tempting way to bypass this issue is to use manipulables (blocks) that are directly tied to phonemes. However, creating phoneme-based blocks leads to two design challenges: (a) how to represent phonemes visually in a child-accessible way and (b) how to account for context-dependent spelling. In the present work, we approached these challenges by develo** a set of animated, onomatopoeia-based mnemonic characters, one per phoneme, that can take the shape of different graphemes.We applied the characters to a construction-based literacy app to simplify independent word-building for literacy beginners. We tested the app during a 13-week-long period with 4- to 5-year-olds in kindergarten classrooms. Children showed visible interest in the characters and properly grasped the principles of their functioning. However, the blocks were not sufficient to scaffold independent word building, leading children to rely on other scaffolding mechanisms. To test the characters' efficiency as mnemonics, we evaluated their effect on the speed and accuracy of finding phonemes on a keyboard. The results suggest that there were both children who benefitted from the characters in this task and those who performed better without them. The factors that differentiated these two categories are currently unclear. To help further research on phonetic mnemonics in literacy learning software, we are making the characters available to the research community.
△ Less
Submitted 30 March, 2021;
originally announced March 2021.
-
Porting HEP Parameterized Calorimeter Simulation Code to GPUs
Authors:
Zhihua Dong,
Heather Gray,
Charles Leggett,
Meifeng Lin,
Vincent R. Pascuzzi,
Kwangmin Yu
Abstract:
The High Energy Physics (HEP) experiments, such as those at the Large Hadron Collider (LHC), traditionally consume large amounts of CPU cycles for detector simulations and data analysis, but rarely use compute accelerators such as GPUs. As the LHC is upgraded to allow for higher luminosity, resulting in much higher data rates, purely relying on CPUs may not provide enough computing power to suppor…
▽ More
The High Energy Physics (HEP) experiments, such as those at the Large Hadron Collider (LHC), traditionally consume large amounts of CPU cycles for detector simulations and data analysis, but rarely use compute accelerators such as GPUs. As the LHC is upgraded to allow for higher luminosity, resulting in much higher data rates, purely relying on CPUs may not provide enough computing power to support the simulation and data analysis needs. As a proof of concept, we investigate the feasibility of porting a HEP parameterized calorimeter simulation code to GPUs. We have chosen to use FastCaloSim, the ATLAS fast parametrized calorimeter simulation. While FastCaloSim is sufficiently fast such that it does not impose a bottleneck in detector simulations overall, significant speed-ups in the processing of large samples can be achieved from GPU parallelization at both the particle (intra-event) and event levels; this is especially beneficial in conditions expected at the high-luminosity LHC, where extremely high per-event particle multiplicities will result from the many simultaneous proton-proton collisions. We report our experience with porting FastCaloSim to NVIDIA GPUs using CUDA. A preliminary Kokkos implementation of FastCaloSim for portability to other parallel architectures is also described.
△ Less
Submitted 18 May, 2021; v1 submitted 26 March, 2021;
originally announced March 2021.
-
HL-LHC Computing Review: Common Tools and Community Software
Authors:
HEP Software Foundation,
:,
Thea Aarrestad,
Simone Amoroso,
Markus Julian Atkinson,
Joshua Bendavid,
Tommaso Boccali,
Andrea Bocci,
Andy Buckley,
Matteo Cacciari,
Paolo Calafiura,
Philippe Canal,
Federico Carminati,
Taylor Childers,
Vitaliano Ciulli,
Gloria Corti,
Davide Costanzo,
Justin Gage Dezoort,
Caterina Doglioni,
Javier Mauricio Duarte,
Agnieszka Dziurda,
Peter Elmer,
Markus Elsing,
V. Daniel Elvira,
Giulio Eulisse
, et al. (85 additional authors not shown)
Abstract:
Common and community software packages, such as ROOT, Geant4 and event generators have been a key part of the LHC's success so far and continued development and optimisation will be critical in the future. The challenges are driven by an ambitious physics programme, notably the LHC accelerator upgrade to high-luminosity, HL-LHC, and the corresponding detector upgrades of ATLAS and CMS. In this doc…
▽ More
Common and community software packages, such as ROOT, Geant4 and event generators have been a key part of the LHC's success so far and continued development and optimisation will be critical in the future. The challenges are driven by an ambitious physics programme, notably the LHC accelerator upgrade to high-luminosity, HL-LHC, and the corresponding detector upgrades of ATLAS and CMS. In this document we address the issues for software that is used in multiple experiments (usually even more widely than ATLAS and CMS) and maintained by teams of developers who are either not linked to a particular experiment or who contribute to common software within the context of their experiment activity. We also give space to general considerations for future software and projects that tackle upcoming challenges, no matter who writes it, which is an area where community convergence on best practice is extremely useful.
△ Less
Submitted 31 August, 2020;
originally announced August 2020.
-
Hidden Diversity of Vacancy Networks in Prussian Blue Analogues
Authors:
Arkadiy Simonov,
Trees De Baerdemaeker,
Hanna L. B. Boström,
María Laura Ríos Gómez,
Harry J. Gray,
Dmitry Chernyshov,
Alexey Bosak,
Hans-Beat Bürgi,
Andrew L. Goodwin
Abstract:
Prussian blue analogues (PBAs) are a broad and important family of microporous inorganic solids, famous for their gas storage, metal-ion immobilisation, proton conduction, and stimuli-dependent magnetic, electronic and optical properties. The family also includes the widely-used double-metal cyanide (DMC) catalysts and the topical hexacyanoferrate/hexacyanomanganate (HCF/HCM) battery materials. Ce…
▽ More
Prussian blue analogues (PBAs) are a broad and important family of microporous inorganic solids, famous for their gas storage, metal-ion immobilisation, proton conduction, and stimuli-dependent magnetic, electronic and optical properties. The family also includes the widely-used double-metal cyanide (DMC) catalysts and the topical hexacyanoferrate/hexacyanomanganate (HCF/HCM) battery materials. Central to the various physical properties of PBAs is the ability to transport mass reversibly, a process made possible by structural vacancies. Normally presumed random, vacancy arrangements are actually crucially important because they control the connectivity of the micropore network, and hence diffusivity and adsorption profiles. The long-standing obstacle to characterising PBA vacancy networks has always been the relative inaccessibility of single-crystal samples. Here we report the growth of single crystals of a range of PBAs. By measuring and interpreting their X-ray diffuse scattering patterns, we identify for the first time a striking diversity of non-random vacancy arrangements that is hidden from conventional crystallographic analysis of powder samples. Moreover, we show that this unexpected phase complexity can be understood in terms of a remarkably simple microscopic model based on local rules of electroneutrality and centrosymmetry. The hidden phase boundaries that emerge demarcate vacancy-network polymorphs with profoundly different micropore characteristics. Our results establish a clear foundation for correlated defect engineering in PBAs as a means of controlling storage capacity, anisotropy, and transport efficiency.
△ Less
Submitted 28 August, 2019;
originally announced August 2019.
-
Higgs couplings in ATLAS at Run2
Authors:
Heather Gray
Abstract:
Since the discovery of the Higgs boson in summer 2012, the understanding of its properties has been a high priority of the ATLAS physics program. Measurements of Higgs boson properties sensitive to its production processes, decay modes, kinematics, mass, and spin/CP properties based on $pp$ collision data recorded at 13 TeV are presented. The analyses of several production processes and decay chan…
▽ More
Since the discovery of the Higgs boson in summer 2012, the understanding of its properties has been a high priority of the ATLAS physics program. Measurements of Higgs boson properties sensitive to its production processes, decay modes, kinematics, mass, and spin/CP properties based on $pp$ collision data recorded at 13 TeV are presented. The analyses of several production processes and decay channels will be described, including recent highlights as the direct observation of the couplings to top and beauty quarks, and an updated combination of all measurements.
△ Less
Submitted 14 July, 2019;
originally announced July 2019.
-
The Tracking Machine Learning challenge : Accuracy phase
Authors:
Sabrina Amrouche,
Laurent Basara,
Paolo Calafiura,
Victor Estrade,
Steven Farrell,
Diogo R. Ferreira,
Liam Finnie,
Nicole Finnie,
Cécile Germain,
Vladimir Vava Gligorov,
Tobias Golling,
Sergey Gorbunov,
Heather Gray,
Isabelle Guyon,
Mikhail Hushchyn,
Vincenzo Innocente,
Moritz Kiehn,
Edward Moyse,
Jean-Francois Puget,
Yuval Reina,
David Rousseau,
Andreas Salzburger,
Andrey Ustyuzhanin,
Jean-Roch Vlimant,
Johan Sokrates Wind
, et al. (2 additional authors not shown)
Abstract:
This paper reports the results of an experiment in high energy physics: using the power of the "crowd" to solve difficult experimental problems linked to tracking accurately the trajectory of particles in the Large Hadron Collider (LHC). This experiment took the form of a machine learning challenge organized in 2018: the Tracking Machine Learning Challenge (TrackML). Its results were discussed at…
▽ More
This paper reports the results of an experiment in high energy physics: using the power of the "crowd" to solve difficult experimental problems linked to tracking accurately the trajectory of particles in the Large Hadron Collider (LHC). This experiment took the form of a machine learning challenge organized in 2018: the Tracking Machine Learning Challenge (TrackML). Its results were discussed at the competition session at the Neural Information Processing Systems conference (NeurIPS 2018). Given 100.000 points, the participants had to connect them into about 10.000 arcs of circles, following the trajectory of particles issued from very high energy proton collisions. The competition was difficult with a dozen front-runners well ahead of a pack. The single competition score is shown to be accurate and effective in selecting the best algorithms from the domain point of view. The competition has exposed a diversity of approaches, with various roles for Machine Learning, a number of which are discussed in the document
△ Less
Submitted 3 May, 2021; v1 submitted 14 April, 2019;
originally announced April 2019.
-
A pattern recognition algorithm for quantum annealers
Authors:
Frederic Bapst,
Wahid Bhimji,
Paolo Calafiura,
Heather Gray,
Wim Lavrijsen,
Lucy Linder
Abstract:
The reconstruction of charged particles will be a key computing challenge for the high-luminosity Large Hadron Collider (HL-LHC) where increased data rates lead to large increases in running time for current pattern recognition algorithms. An alternative approach explored here expresses pattern recognition as a Quadratic Unconstrained Binary Optimization (QUBO) using software and quantum annealing…
▽ More
The reconstruction of charged particles will be a key computing challenge for the high-luminosity Large Hadron Collider (HL-LHC) where increased data rates lead to large increases in running time for current pattern recognition algorithms. An alternative approach explored here expresses pattern recognition as a Quadratic Unconstrained Binary Optimization (QUBO) using software and quantum annealing. At track densities comparable with current LHC conditions, our approach achieves physics performance competitive with state-of-the-art pattern recognition algorithms. More research will be needed to achieve comparable performance in HL-LHC conditions, as increasing track density decreases the purity of the QUBO track segment classifier.
△ Less
Submitted 21 February, 2019;
originally announced February 2019.
-
Automatic individual pig detection and tracking in surveillance videos
Authors:
Lei Zhang,
Helen Gray,
Xujiong Ye,
Lisa Collins,
Nigel Allinson
Abstract:
Individual pig detection and tracking is an important requirement in many video-based pig monitoring applications. However, it still remains a challenging task in complex scenes, due to problems of light fluctuation, similar appearances of pigs, shape deformations and occlusions. To tackle these problems, we propose a robust real time multiple pig detection and tracking method which does not requi…
▽ More
Individual pig detection and tracking is an important requirement in many video-based pig monitoring applications. However, it still remains a challenging task in complex scenes, due to problems of light fluctuation, similar appearances of pigs, shape deformations and occlusions. To tackle these problems, we propose a robust real time multiple pig detection and tracking method which does not require manual marking or physical identification of the pigs, and works under both daylight and infrared light conditions. Our method couples a CNN-based detector and a correlation filter-based tracker via a novel hierarchical data association algorithm. The detector gains the best accuracy/speed trade-off by using the features derived from multiple layers at different scales in a one-stage prediction network. We define a tag-box for each pig as the tracking target, and the multiple object tracking is conducted in a key-points tracking manner using learned correlation filters. Under challenging conditions, the tracking failures are modelled based on the relations between responses of detector and tracker, and the data association algorithm allows the detection hypotheses to be refined, meanwhile the drifted tracks can be corrected by probing the tracking failures followed by the re-initialization of tracking. As a result, the optimal tracklets can sequentially grow with on-line refined detections, and tracking fragments are correctly integrated into respective tracks while kee** the original identifications. Experiments with a dataset captured from a commercial farm show that our method can robustly detect and track multiple pigs under challenging conditions. The promising performance of the proposed method also demonstrates a feasibility of long-term individual pig tracking in a complex environment and thus promises a commercial potential.
△ Less
Submitted 12 December, 2018;
originally announced December 2018.
-
Shrinkage estimation of large covariance matrices using multiple shrinkage targets
Authors:
Harry Gray,
Gwenaël G. R. Leday,
Catalina A. Vallejos,
Sylvia Richardson
Abstract:
Linear shrinkage estimators of a covariance matrix --- defined by a weighted average of the sample covariance matrix and a pre-specified shrinkage target matrix --- are popular when analysing high-throughput molecular data. However, their performance strongly relies on an appropriate choice of target matrix. This paper introduces a more flexible class of linear shrinkage estimators that can accomm…
▽ More
Linear shrinkage estimators of a covariance matrix --- defined by a weighted average of the sample covariance matrix and a pre-specified shrinkage target matrix --- are popular when analysing high-throughput molecular data. However, their performance strongly relies on an appropriate choice of target matrix. This paper introduces a more flexible class of linear shrinkage estimators that can accommodate multiple shrinkage target matrices, directly accounting for the uncertainty regarding the target choice. This is done within a conjugate Bayesian framework, which is computationally efficient. Using both simulated and real data, we show that the proposed estimator is less sensitive to target misspecification and can outperform state-of-the-art (nonparametric) single-target linear shrinkage estimators. Using protein expression data from The Cancer Proteome Atlas we illustrate how multiple sources of prior information (obtained from more than 30 different cancer types) can be incorporated into the proposed multi-target linear shrinkage estimator. In particular, it is shown that the target-specific weights can provide insights into the differences and similarities between cancer types. Software for the method is freely available as an R-package at http://github.com/HGray384/TAS.
△ Less
Submitted 21 September, 2018;
originally announced September 2018.
-
Production and Integration of the ATLAS Insertable B-Layer
Authors:
B. Abbott,
J. Albert,
F. Alberti,
M. Alex,
G. Alimonti,
S. Alkire,
P. Allport,
S. Altenheiner,
L. Ancu,
E. Anderssen,
A. Andreani,
A. Andreazza,
B. Axen,
J. Arguin,
M. Backhaus,
G. Balbi,
J. Ballansat,
M. Barbero,
G. Barbier,
A. Bassalat,
R. Bates,
P. Baudin,
M. Battaglia,
T. Beau,
R. Beccherle
, et al. (352 additional authors not shown)
Abstract:
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and i…
▽ More
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector.
△ Less
Submitted 6 June, 2018; v1 submitted 2 March, 2018;
originally announced March 2018.
-
A Roadmap for HEP Software and Computing R&D for the 2020s
Authors:
Johannes Albrecht,
Antonio Augusto Alves Jr,
Guilherme Amadio,
Giuseppe Andronico,
Nguyen Anh-Ky,
Laurent Aphecetche,
John Apostolakis,
Makoto Asai,
Luca Atzori,
Marian Babik,
Giuseppe Bagliesi,
Marilena Bandieramonte,
Sunanda Banerjee,
Martin Barisits,
Lothar A. T. Bauerdick,
Stefano Belforte,
Douglas Benjamin,
Catrin Bernius,
Wahid Bhimji,
Riccardo Maria Bianchi,
Ian Bird,
Catherine Biscarat,
Jakob Blomer,
Kenneth Bloom,
Tommaso Boccali
, et al. (285 additional authors not shown)
Abstract:
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for…
▽ More
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for the HL-LHC in particular, it is critical that all of the collaborating stakeholders agree on the software goals and priorities, and that the efforts complement each other. In this spirit, this white paper describes the R&D activities required to prepare for this software upgrade.
△ Less
Submitted 19 December, 2018; v1 submitted 18 December, 2017;
originally announced December 2017.
-
Temperature dependence of nuclear fission time in heavy-ion fusion-fission reactions
Authors:
Chris Eccles,
Sanil Roy,
Thomas H. Gray,
Alessio Zaccone
Abstract:
Accounting for viscous dam** within Fokker-Planck equations led to various improvements in the understanding and analysis of nuclear fission of heavy nuclei. Analytical expressions for the fission time are typically provided by Kramers' theory, which improves on the Bohr-Wheeler estimate by including the time-scale related to many-particle dissipative processes along the deformation coordinate.…
▽ More
Accounting for viscous dam** within Fokker-Planck equations led to various improvements in the understanding and analysis of nuclear fission of heavy nuclei. Analytical expressions for the fission time are typically provided by Kramers' theory, which improves on the Bohr-Wheeler estimate by including the time-scale related to many-particle dissipative processes along the deformation coordinate. However, Kramers' formula breaks down for sufficiently high excitation energies where Kramers' assumption of a large barrier no longer holds. In the regime $T>1$ MeV, Kramers' theory should be replaced by a new theory based on the Ornstein-Uhlenbeck first-passage time method that is proposed here. The theory is applied to fission time data from fusion-fission experiments on $^{16}$O+$^{208}$Pb $\rightarrow$ $^{224}$Th. The proposed model provides an internally consistent one-parameter fitting of fission data with a constant nuclear friction as the fitting parameter, whereas Kramers' fitting requires a value of friction which falls out of the allowed range. The theory provides also an analytical formula that in future work can be easily implemented in numerical codes such as CASCADE or JOANNE4.
△ Less
Submitted 21 July, 2017;
originally announced July 2017.
-
Dissociation rates from single-molecule pulling experiments under large thermal fluctuations or large applied force
Authors:
Masoud Abkenar,
Thomas H. Gray,
Alessio Zaccone
Abstract:
Theories that are used to extract energy-landscape information from single-molecule pulling experiments in biophysics are all invariably based on Kramers' theory of thermally-activated escape rate from a potential well. As is well known, this theory recovers the Arrhenius dependence of the rate on the barrier energy, and crucially relies on the assumption that the barrier energy is much larger tha…
▽ More
Theories that are used to extract energy-landscape information from single-molecule pulling experiments in biophysics are all invariably based on Kramers' theory of thermally-activated escape rate from a potential well. As is well known, this theory recovers the Arrhenius dependence of the rate on the barrier energy, and crucially relies on the assumption that the barrier energy is much larger than $k_{B}T$ (limit of comparatively low thermal fluctuations). As was already shown in Dudko, Hummer, Szabo Phys. Rev. Lett. (2006), this approach leads to the unphysical prediction of dissociation time increasing with decreasing binding energy when the latter is lowered to values comparable to $k_{B}T$ (limit of large thermal fluctuations). We propose a new theoretical framework (fully supported by numerical simulations) which amends Kramers' theory in this limit, and use it to extract the dissociation rate from single-molecule experiments where now predictions are physically meaningful and in agreement with simulations over the whole range of applied forces (binding energies). These results are expected to be relevant for a large number of experimental settings in single-molecule biophysics.
△ Less
Submitted 29 April, 2017;
originally announced May 2017.
-
A VLA Search for Radio Signals from M31 and M33
Authors:
Robert H. Gray,
Kunal P. Mooley
Abstract:
Observing nearby galaxies would facilitate the search for artificial radio signals by sampling many billions of stars simultaneously, but few efforts have been made to exploit this opportunity. An added attraction is that the Milky Way is the second-largest member of the Local Group, so our galaxy might be a probable target for hypothetical broadcasters in nearby galaxies. We present the first rel…
▽ More
Observing nearby galaxies would facilitate the search for artificial radio signals by sampling many billions of stars simultaneously, but few efforts have been made to exploit this opportunity. An added attraction is that the Milky Way is the second-largest member of the Local Group, so our galaxy might be a probable target for hypothetical broadcasters in nearby galaxies. We present the first relatively high spectral resolution (<1 kHz) 21 cm band search for intelligent radio signals of complete galaxies in the Local Group with the Jansky VLA, observing the galaxies M31 (Andromeda) and M33 (Triangulum) - the first and third largest members of the group respectively - sampling more stars than any prior search of this kind. We used 122 Hz channels over a 1 MHz spectral window in the target galaxy velocity frame of reference, and 15 Hz channels over a 125 kHz window in our local standard of rest. No narrowband signals were detected above a signal-to-noise ratio of 7, suggesting the absence of continuous narrowband flux greater than approximately 0.24 Jy and 1.33 Jy in the respective spectral windows illuminating our part of the Milky Way during our observations in December 2014 and January 2015. This is also the first study in which the upgraded VLA has been used for SETI.
△ Less
Submitted 6 January, 2018; v1 submitted 10 February, 2017;
originally announced February 2017.
-
On extracting sediment transport information from measurements of luminescence in river sediment
Authors:
Harrison J. Gray,
Gregory E. Tucker,
Shannon A. Mahan,
Chris McGuire,
Edward J. Rhodes
Abstract:
Accurately quantifying sediment transport rates in rivers remains an important goal for geomorphologists, hydraulic engineers, and environmental scientists. However, current techniques for measuring transport rates are laborious, and formulae to predict transport are notoriously inaccurate. Here, we attempt to estimate sediment transport rates using luminescence, a property of common sedimentary m…
▽ More
Accurately quantifying sediment transport rates in rivers remains an important goal for geomorphologists, hydraulic engineers, and environmental scientists. However, current techniques for measuring transport rates are laborious, and formulae to predict transport are notoriously inaccurate. Here, we attempt to estimate sediment transport rates using luminescence, a property of common sedimentary minerals that is used by the geoscience community for geochronology. This method is advantageous because of the ease of measurement on ubiquitous quartz and feldspar sand. We develop a model based on conservation of energy and sediment mass to explain the patterns of luminescence in river channel sediment from a first-principles perspective. We show that the model can accurately reproduce the luminescence observed in previously published field measurements from two rivers with very different sediment transport styles. The parameters from the model can then be used to estimate the time-averaged virtual velocity, characteristic transport lengthscales, storage timescales, and floodplain exchange rates of fine sand-sized sediment in a fluvial system. The values obtained from the luminescence method appear to fall within expected ranges based on published compilations. However, caution is warranted when applying the model as the complex nature of sediment transport can sometimes invalidate underlying simplifications.
△ Less
Submitted 19 October, 2016;
originally announced October 2016.
-
Physics at a 100 TeV pp collider: Higgs and EW symmetry breaking studies
Authors:
R. Contino,
D. Curtin,
A. Katz,
M. L. Mangano,
G. Panico,
M. J. Ramsey-Musolf,
G. Zanderighi,
C. Anastasiou,
W. Astill,
G. Bambhaniya,
J. K. Behr,
W. Bizon,
P. S. Bhupal Dev,
D. Bortoletto,
D. Buttazzo,
Q. -H. Cao,
F. Caola,
J. Chakrabortty,
C. -Y. Chen,
S. -L. Chen,
D. de Florian,
F. Dulat,
C. Englert,
J. A. Frost,
B. Fuks
, et al. (50 additional authors not shown)
Abstract:
This report summarises the physics opportunities for the study of Higgs bosons and the dynamics of electroweak symmetry breaking at the 100 TeV pp collider.
This report summarises the physics opportunities for the study of Higgs bosons and the dynamics of electroweak symmetry breaking at the 100 TeV pp collider.
△ Less
Submitted 30 June, 2016;
originally announced June 2016.
-
The Fermi Paradox is Neither Fermis Nor a Paradox
Authors:
Robert H. Gray
Abstract:
The so-called Fermi paradox claims that if technological life existed anywhere else, we would see evidence of its visits to Earth-and since we do not, such life does not exist, or some special explanation is needed. Enrico Fermi, however, never published anything on this topic. On the one occasion he is known to have mentioned it, he asked 'where is everybody?'- apparently suggesting that we don't…
▽ More
The so-called Fermi paradox claims that if technological life existed anywhere else, we would see evidence of its visits to Earth-and since we do not, such life does not exist, or some special explanation is needed. Enrico Fermi, however, never published anything on this topic. On the one occasion he is known to have mentioned it, he asked 'where is everybody?'- apparently suggesting that we don't see extraterrestrials on Earth because interstellar travel may not be feasible, but not suggesting that intelligent extraterrestrial life does not exist, or suggesting its absence is paradoxical.
The claim 'they are not here; therefore they do not exist' was first published by Michael Hart, claiming that interstellar travel and colonization of the galaxy would be inevitable if intelligent extraterrestrial life existed, and taking its absence here as proof that it does not exist anywhere. The Fermi paradox appears to originate in Hart's argument, not Fermi's question.
Clarifying the origin of these ideas is important, because the Fermi paradox is seen by some as an authoritative objection to searching for evidence of extraterrestrial intelligence-cited in the U. S. Congress as a reason for killing NASA's SETI program on one occasion-but evidence indicates that it misrepresents Fermi's views, misappropriates his authority, deprives the actual authors of credit, and is not a valid paradox.
Keywords: Astrobiology, SETI, Fermi paradox, extraterrestrial life
△ Less
Submitted 2 April, 2016;
originally announced May 2016.
-
Measurement of the b-jet cross-section with associated vector boson production with the ATLAS experiment at the LHC
Authors:
Heather M. Gray
Abstract:
A measurement of the cross-section for vector boson production in association with jets containing b-hadrons is presented using 35 pb-1 of data from the LHC collected by the ATLAS experiment in 2010. Such processes are not only important tests of pQCD but also large, irreducible backgrounds to searches such as a low mass Higgs boson decaying to pairs of b-quarks when the Higgs is produced in assoc…
▽ More
A measurement of the cross-section for vector boson production in association with jets containing b-hadrons is presented using 35 pb-1 of data from the LHC collected by the ATLAS experiment in 2010. Such processes are not only important tests of pQCD but also large, irreducible backgrounds to searches such as a low mass Higgs boson decaying to pairs of b-quarks when the Higgs is produced in association with a vector boson. Theoretical predictions of the V+b production rate have large uncertainties and previous measurements have reported discrepancies. Cross-sections measured using in the electron and muon channels will be shown. Comparisons will be made to recent theoretical predictions at the next-to-leading order in alpha_s.
△ Less
Submitted 24 January, 2012;
originally announced January 2012.
-
New Physics at the LHC. A Les Houches Report: Physics at TeV Colliders 2009 - New Physics Working Group
Authors:
G. Brooijmans,
C. Grojean,
G. D. Kribs,
C. Shepherd-Themistocleous,
K. Agashe,
L. Basso,
G. Belanger,
A. Belyaev,
K. Black,
T. Bose,
R. Brunelière,
G. Cacciapaglia,
E. Carrera,
S. P. Das,
A. Deandrea,
S. De Curtis,
A. -I. Etienvre,
J. R. Espinosa,
S. Fichet,
L. Gauthier,
S. Gopalakrishna,
H. Gray,
B. Gripaios,
M. Guchait,
S. J. Harper
, et al. (35 additional authors not shown)
Abstract:
We present a collection of signatures for physics beyond the standard model that need to be explored at the LHC. First, are presented various tools developed to measure new particle masses in scenarios where all decays include an unobservable particle. Second, various aspects of supersymmetric models are discussed. Third, some signatures of models of strong electroweak symmetry are discussed. In t…
▽ More
We present a collection of signatures for physics beyond the standard model that need to be explored at the LHC. First, are presented various tools developed to measure new particle masses in scenarios where all decays include an unobservable particle. Second, various aspects of supersymmetric models are discussed. Third, some signatures of models of strong electroweak symmetry are discussed. In the fourth part, a special attention is devoted to high mass resonances, as the ones appearing in models with warped extra dimensions. Finally, prospects for models with a hidden sector/valley are presented. Our report, which includes brief experimental and theoretical reviews as well as original results, summarizes the activities of the "New Physics" working group for the "Physics at TeV Colliders" workshop (Les Houches, France, 8-26 June, 2009).
△ Less
Submitted 7 May, 2010;
originally announced May 2010.
-
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
Authors:
The ATLAS Collaboration,
G. Aad,
E. Abat,
B. Abbott,
J. Abdallah,
A. A. Abdelalim,
A. Abdesselam,
O. Abdinov,
B. Abi,
M. Abolins,
H. Abramowicz,
B. S. Acharya,
D. L. Adams,
T. N. Addy,
C. Adorisio,
P. Adragna,
T. Adye,
J. A. Aguilar-Saavedra,
M. Aharrouche,
S. P. Ahlen,
F. Ahles,
A. Ahmad,
H. Ahmed,
G. Aielli,
T. Akdogan
, et al. (2587 additional authors not shown)
Abstract:
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on…
▽ More
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.
△ Less
Submitted 14 August, 2009; v1 submitted 28 December, 2008;
originally announced January 2009.
-
A Cone Jet-Finding Algorithm for Heavy-Ion Collisions at LHC Energies
Authors:
S-L Blyth,
M J Horner,
T Awes,
T Cormier,
H Gray,
J L Klay,
S R Klein,
M van Leeuwen,
A Morsch,
G Odyniec,
A Pavlinov
Abstract:
Standard jet finding techniques used in elementary particle collisions have not been successful in the high track density of heavy-ion collisions. This paper describes a modified cone-type jet finding algorithm developed for the complex environment of heavy-ion collisions. The primary modification to the algorithm is the evaluation and subtraction of the large background energy, arising from unc…
▽ More
Standard jet finding techniques used in elementary particle collisions have not been successful in the high track density of heavy-ion collisions. This paper describes a modified cone-type jet finding algorithm developed for the complex environment of heavy-ion collisions. The primary modification to the algorithm is the evaluation and subtraction of the large background energy, arising from uncorrelated soft hadrons, in each collision. A detailed analysis of the background energy and its event-by-event fluctuations has been performed on simulated data, and a method developed to estimate the background energy inside the jet cone from the measured energy outside the cone on an event-by-event basis. The algorithm has been tested using Monte-Carlo simulations of Pb+Pb collisions at $\sqrt{s}=5.5$ TeV for the ALICE detector at the LHC. The algorithm can reconstruct jets with a transverse energy of 50 GeV and above with an energy resolution of $\sim30%$.
△ Less
Submitted 15 September, 2006;
originally announced September 2006.
