-
Interference of ultrahigh frequency acoustic phonons from distant quasi-continuous sources
Authors:
C. Xiang,
E. R. Cardozo de Oliveira,
S. Sandeep,
K. Papatryfonos,
M. Morassi,
L. Le Gratiet,
A. Harouri,
I. Sagnes,
A. Lemaitre,
O. Ortiz,
M. Esmann,
N. D. Lanzillotti-Kimura
Abstract:
The generation of propagating acoustic waves is essential for telecommunication applications, quantum technologies, and sensing. Up to now, the electrical generation has been at the core of most implementations, but is technologically limited to a few gigahertz. Overcoming this frequency limit holds the prospect of faster modulators, quantum acoustics at higher working temperatures, nanoacoustic s…
▽ More
The generation of propagating acoustic waves is essential for telecommunication applications, quantum technologies, and sensing. Up to now, the electrical generation has been at the core of most implementations, but is technologically limited to a few gigahertz. Overcoming this frequency limit holds the prospect of faster modulators, quantum acoustics at higher working temperatures, nanoacoustic sensing from smaller volumes. Alternatively, the optical excitation of acoustic resonators has unlocked frequencies up to 1 THz, but in most cases, the acoustic energy cannot be efficiently extracted from the resonator into a propagating wave. Here, we demonstrate a quasi-continuous and coherent source of 20 GHz acoustic phonons, based on a ridge waveguide, structured in the vertical direction as a high-Q acousto-optic resonator. The high frequency phonons propagate up to 20 $μ$m away from the source, with a decay rate of $\sim$1.14 dB/$μ$m. We demonstrate the coherence between acoustic phonons generated from two distant sources through spatio-temporal interference. This concept could be scaled up to a larger number of sources, which enable a new generation of optically programmed, reconfigurable nanoacoustic devices and applications.
△ Less
Submitted 9 July, 2024;
originally announced July 2024.
-
Elliptical micropillars for efficient generation and detection of coherent acoustic phonons
Authors:
Chushuang Xiang,
Anne Rodriguez,
Edson Rafael Cardozo de Oliveira,
Luc Le Gratiet,
Isabelle Sagnes,
Martina Morassi,
Aristide Lemaitre,
Norberto Daniel Lanzillotti-Kimura
Abstract:
Coherent acoustic phonon generation and detection assisted by optical resonances are at the core of efficient optophononic transduction processes. However, when dealing with a single optical resonance, the optimum generation and detection conditions take place at different laser wavelengths, i.e. different detunings from the cavity mode. In this work, we theoretically propose and experimentally de…
▽ More
Coherent acoustic phonon generation and detection assisted by optical resonances are at the core of efficient optophononic transduction processes. However, when dealing with a single optical resonance, the optimum generation and detection conditions take place at different laser wavelengths, i.e. different detunings from the cavity mode. In this work, we theoretically propose and experimentally demonstrate the use of elliptical micropillars to reach these conditions simultaneously at a single wavelength. Elliptical micropillar optophononic resonators present two optical modes with orthogonal polarizations at different wavelengths. By employing a cross-polarized scheme pump-probe experiment, we exploit the mode splitting and couple the pump beam to one mode while the probe is detuned from the other one. In this way, at a particular micropillar ellipticity, both phonon generation and detection processes are enhanced. We report an enhancement of a factor of ~3.1 when comparing the signals from elliptical and circular micropillars. Our findings constitute a step forward in tailoring the light-matter interaction for more efficient ultrahigh-frequency optophononic devices.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
Controlling photon polarisation with a single quantum dot spin
Authors:
Elham Mehdi,
Manuel Gundin-Martinez,
Clément Millet,
Niccolo Somaschi,
Aristide Lemaître,
Isabelle Sagnes,
Luc Le Gratiet,
Dario Fioretto,
Nadia Belabas,
Olivier Krebs,
Pascale Senellart,
Loïc Lanco
Abstract:
In the framework of optical quantum computing and communications, a major objective consists in building receiving nodes that implement conditional operations on incoming photons, using the interaction with a single stationary qubit. In particular, the quest for scalable nodes motivated the development of cavity-enhanced spin-photon interfaces with solid-state emitters. An important challenge rema…
▽ More
In the framework of optical quantum computing and communications, a major objective consists in building receiving nodes that implement conditional operations on incoming photons, using the interaction with a single stationary qubit. In particular, the quest for scalable nodes motivated the development of cavity-enhanced spin-photon interfaces with solid-state emitters. An important challenge remains, however, to produce a stable, controllable, spin-dependant photon state, in a deterministic way. Here we use a pillar-based high-Q cavity, embedding a singly-charged semiconductor quantum dot, to demonstrate the control of giant polarisation rotations induced by a single electron spin. A complete tomography approach is used to deduce the output polarisation Stokes vector, conditioned by a single spin state. We experimentally demonstrate rotation amplitudes such as $\pm \fracπ{2}$ and $π$ in the Poincaré sphere, as required for applications based on spin-polarisation map** and spin-mediated photon-photon gates. In agreement with our modeling, we observe that the environmental noise does not limit the amplitude of the spin-induced rotation, yet slightly degrades the polarisation purity of the output states. We find that the polarisation state of the reflected photons can be manipulated in most of the Poincaré sphere, through controlled spin-induced rotations, thanks to moderate cavity birefringence and limited noise. This control allows the operation of spin-photon interfaces in various configurations, including at zero or low magnetic fields, which ensures compatibility with key protocols for photonic cluster state generation.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
Brillouin Scattering Selection Rules in Polarization-Sensitive Photonic Resonators
Authors:
Anne Rodriguez,
Priya Priya,
Edson Cardozo de Oliveira,
Luc Le Gratiet,
Isabelle Sagnes,
Martina Morassi,
Aristide Lemaître,
Florian Pastier,
Loïc Lanco,
Martin Esmann,
Norberto Daniel Lanzillotti-Kimura
Abstract:
The selection rules governing spontaneous Brillouin scattering in crystalline solids are usually taken as intrinsic material properties, locking the relative polarization of excitation and signal in bulk. In this work, we independently manipulate these polarization states by means of optical resonances in elliptical micropillars and demonstrate a polarization-based filtering scheme for Brillouin s…
▽ More
The selection rules governing spontaneous Brillouin scattering in crystalline solids are usually taken as intrinsic material properties, locking the relative polarization of excitation and signal in bulk. In this work, we independently manipulate these polarization states by means of optical resonances in elliptical micropillars and demonstrate a polarization-based filtering scheme for Brillouin spectroscopy in the 20-100 GHz range, important for telecom applications. This strong modification of selection rules using elliptical micropillars can be extended to any optical system with localized, polarization-sensitive modes, such as plasmonic resonators, photonic crystals, birefringent micro-, and nanostructures. Our polarization control protocol will thus find applications in the engineering of light-matter interactions in optomechanical, optoelectronic and quantum optics devices.
△ Less
Submitted 26 September, 2022;
originally announced September 2022.
-
Continuous-Wave Second-Harmonic Generation in Orientation-Patterned GaP Waveguides at Telecom Wavelengths
Authors:
Konstantinos Pantzas,
Sylvain Combrié,
Myriam Bailly,
Raphaël Mandouze,
Francesco Rinaldi Talenti,
Abdelmounaim Harouri,
Bruno Gérard,
Grégoire Beaudoin,
Luc Le Gratiet,
Gilles Patriarche,
Alfredo de Rossi,
Yoan Léger,
Isabelle Sagnes,
Arnaud Grisard
Abstract:
A new process to produce Orientation-Patterned Gallium Phosphide (OP-GaP) on GaAs with almost perfectly parallel domain boundaries is presented. Taking advantage of the chemical selectivity between phosphides and arsenides, OP-GaP is processed into suspended shallow-ridge waveguides. Efficient Second-Harmonic Generation from Telecom wavelengths is achieved in both Type-I and Type-II polarisation c…
▽ More
A new process to produce Orientation-Patterned Gallium Phosphide (OP-GaP) on GaAs with almost perfectly parallel domain boundaries is presented. Taking advantage of the chemical selectivity between phosphides and arsenides, OP-GaP is processed into suspended shallow-ridge waveguides. Efficient Second-Harmonic Generation from Telecom wavelengths is achieved in both Type-I and Type-II polarisation configurations. The highest observed conversion efficiency is \SI{200}{\percent\per\watt\per\centi\meter\squared}, with a bandwidth of \SI{2.67}{\nano\meter} in a \SI{1}{\milli\meter}-long waveguide. The variation of the conversion efficiency with wavelength closely follows a squared cardinal sine function, in excellent agreement with theory, confirming the good uniformity of the poling period over the entire length of the waveguide.
△ Less
Submitted 5 May, 2022; v1 submitted 17 March, 2022;
originally announced March 2022.
-
Observation of KPZ universal scaling in a one-dimensional polariton condensate
Authors:
Quentin Fontaine,
Davide Squizzato,
Florent Baboux,
Ivan Amelio,
Aristide Lemaître,
Marina Morassi,
Isabelle Sagnes,
Luc Le Gratiet,
Abdelmounaim Harouri,
Michiel Wouters,
Iacopo Carusotto,
Alberto Amo,
Maxime Richard,
Anna Minguzzi,
Léonie Canet,
Sylvain Ravets,
Jacqueline Bloch
Abstract:
Revealing universal behaviors is a hallmark of statistical physics. Phenomena such as the stochastic growth of crystalline surfaces, of interfaces in bacterial colonies, and spin transport in quantum magnets all belong to the same universality class, despite the great plurality of physical mechanisms they involve at the microscopic level. This universality stems from a common underlying effective…
▽ More
Revealing universal behaviors is a hallmark of statistical physics. Phenomena such as the stochastic growth of crystalline surfaces, of interfaces in bacterial colonies, and spin transport in quantum magnets all belong to the same universality class, despite the great plurality of physical mechanisms they involve at the microscopic level. This universality stems from a common underlying effective dynamics governed by the non-linear stochastic Kardar-Parisi-Zhang (KPZ) equation. Recent theoretical works suggest that this dynamics also emerges in the phase of out-of-equilibrium systems displaying macroscopic spontaneous coherence. Here, we experimentally demonstrate that the evolution of the phase in a driven-dissipative one-dimensional polariton condensate falls in the KPZ universality class. Our demonstration relies on a direct measurement of KPZ space-time scaling laws, combined with a theoretical microscopic analysis that consistently reveals the other key signatures of this universality class, together with the possible resilience of KPZ dynamics to the presence of space-time vortices. Our results highlight fundamental physical differences between out-of-equilibrium condensates and their equilibrium counterparts, and open a new paradigm for exploring universal behaviors in open systems.
△ Less
Submitted 28 June, 2022; v1 submitted 17 December, 2021;
originally announced December 2021.
-
Optically defined cavities in driven-dissipative photonic lattices
Authors:
O. Jamadi,
B. Real,
K. Sawicki,
C. Hainaut,
A. Gonzalez-Tudela,
N. Pernet,
I. Sagnes,
M. Morassi,
A. Lemaitre,
L. Le Gratiet,
A. Harouri,
S. Ravets,
J. Bloch,
A. Amo
Abstract:
The engineering of localised modes in photonic structures is one of the main targets of modern photonics. An efficient strategy to design these modes is to use the interplay of constructive and destructive interference in periodic photonic lattices. This mechanism is at the origin of defect modes in photonic bandgaps, bound states in the continuum and compact localised states in flat bands. Here w…
▽ More
The engineering of localised modes in photonic structures is one of the main targets of modern photonics. An efficient strategy to design these modes is to use the interplay of constructive and destructive interference in periodic photonic lattices. This mechanism is at the origin of defect modes in photonic bandgaps, bound states in the continuum and compact localised states in flat bands. Here we show that in lattices of lossy resonators, the addition of external optical drives with controlled phase enlarges the possibilities of manipulating interference effects and allows designing novel types of localised modes. Using a honeycomb lattice of coupled micropillars resonantly driven with several laser spots at energies within its photonic bands we demonstrate the localisation of light in at-will geometries down to a single site. These localised modes can be seen as fully reconfigurable optical cavities with the potentiality of enhancing nonlinear effects and of controlling light-matter interactions with single site resolution.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
Chiral emission induced by optical Zeeman effect in polariton micropillars
Authors:
B. Real,
N. Carlon Zambon,
P. St-Jean,
I. Sagnes,
A. Lemaître,
L. Le Gratiet,
A. Harouri,
S. Ravets,
J. Bloch,
A. Amo
Abstract:
The low sensitivity of photons to external magnetic fields is one of the major challenges for the engineering of photonic lattices with broken time-reversal symmetry. Here we show that time-reversal symmetry can be broken for microcavity polaritons in the absence of any external magnetic field thanks to polarization dependent polariton interactions. Circularly polarized excitation of carriers in a…
▽ More
The low sensitivity of photons to external magnetic fields is one of the major challenges for the engineering of photonic lattices with broken time-reversal symmetry. Here we show that time-reversal symmetry can be broken for microcavity polaritons in the absence of any external magnetic field thanks to polarization dependent polariton interactions. Circularly polarized excitation of carriers in a micropillar induces a Zeeman-like energy splitting between polaritons of opposite polarizations. In combination with optical spin-orbit coupling inherent to semiconductor microstructures, the interaction induced Zeeman splitting results in emission of vortical beams with a well-defined chirality. Our experimental findings can be extended to lattices of coupled micropillars opening the possibility of controling optically the topological properties of polariton Chern insulators.
△ Less
Submitted 23 July, 2021;
originally announced July 2021.
-
Topological gap solitons in a 1D non-Hermitian lattice
Authors:
N. Pernet,
P. St-Jean,
D. D. Solnyshkov,
G. Malpuech,
N. Carlon Zambon,
B. Real,
O. Jamadi,
A. Lemaître,
M. Morassi,
L. Le Gratiet,
T. Baptiste,
A. Harouri,
I. Sagnes,
A. Amo,
S. Ravets,
J. Bloch
Abstract:
Nonlinear topological photonics is an emerging field aiming at extending the fascinating properties of topological states to the realm where interactions between the system constituents cannot be neglected. Interactions can indeed trigger topological phase transitions, induce symmetry protection and robustness properties for the many-body system. Moreover when coupling to the environment via drive…
▽ More
Nonlinear topological photonics is an emerging field aiming at extending the fascinating properties of topological states to the realm where interactions between the system constituents cannot be neglected. Interactions can indeed trigger topological phase transitions, induce symmetry protection and robustness properties for the many-body system. Moreover when coupling to the environment via drive and dissipation is also considered, novel collective phenomena are expected to emerge. Here, we report the nonlinear response of a polariton lattice implementing a non-Hermitian version of the Su-Schrieffer-Heeger model. We trigger the formation of solitons in the topological gap of the band structure, and show that these solitons demonstrate robust nonlinear properties with respect to defects, because of the underlying sub-lattice symmetry. Leveraging on the system non-Hermiticity, we engineer the drive phase pattern and unveil bulk solitons that have no counterpart in conservative systems. They are localized on a single sub-lattice with a spatial profile alike a topological edge state. Our results demonstrate a tool to stabilize the nonlinear response of driven dissipative topological systems, which may constitute a powerful resource for nonlinear topological photonics.
△ Less
Submitted 4 January, 2021;
originally announced January 2021.
-
Semi-Dirac Transport and Anisotropic Localization in Polariton Honeycomb Lattices
Authors:
B. Real,
O. Jamadi,
M. Milićević,
N. Pernet,
P. St-Jean,
T. Ozawa,
G. Montambaux,
I. Sagnes,
A. Lemaître,
L. Le Gratiet,
A. Harouri,
S. Ravets,
J. Bloch,
A. Amo
Abstract:
Compression dramatically changes the transport and localization properties of graphene. This is intimately related to the change of symmetry of the Dirac cone when the particle hop** is different along different directions of the lattice. In particular, for a critical compression, a semi-Dirac cone is formed with massless and massive dispersions along perpendicular directions. Here we show direc…
▽ More
Compression dramatically changes the transport and localization properties of graphene. This is intimately related to the change of symmetry of the Dirac cone when the particle hop** is different along different directions of the lattice. In particular, for a critical compression, a semi-Dirac cone is formed with massless and massive dispersions along perpendicular directions. Here we show direct evidence of the highly anisotropic transport of polaritons in a honeycomb lattice of coupled micropillars implementing a semi-Dirac cone. If we optically induce a vacancy-like defect in the lattice, we observe an anisotropically localized polariton distribution in a single sublattice, a consequence of the semi-Dirac dispersion. Our work opens up new horizons for the study of transport and localization in lattices with chiral symmetry and exotic Dirac dispersions.
△ Less
Submitted 4 November, 2020; v1 submitted 7 April, 2020;
originally announced April 2020.
-
Measuring topological invariants in polaritonic graphene
Authors:
P. St-Jean,
A. Dauphin,
P. Massignan,
B. Real,
O. Jamadi,
M. Milićević,
A. Lemaître,
A. Harouri,
L. Le Gratiet,
I. Sagnes,
S. Ravets,
J. Bloch,
A. Amo
Abstract:
Topological materials rely on engineering global properties of their bulk energy bands called topological invariants. These invariants, usually defined over the entire Brillouin zone, are related to the existence of protected edge states. However, for an important class of Hamiltonians corresponding to 2D lattices with time-reversal and chiral symmetry (e.g. graphene), the existence of edge states…
▽ More
Topological materials rely on engineering global properties of their bulk energy bands called topological invariants. These invariants, usually defined over the entire Brillouin zone, are related to the existence of protected edge states. However, for an important class of Hamiltonians corresponding to 2D lattices with time-reversal and chiral symmetry (e.g. graphene), the existence of edge states is linked to invariants that are not defined over the full 2D Brillouin zone, but on reduced 1D sub-spaces. Here, we demonstrate a novel scheme based on a combined real- and momentum-space measurement to directly access these 1D topological invariants in lattices of semiconductor microcavities confining exciton-polaritons. We extract these invariants in arrays emulating the physics of regular and critically compressed graphene sucht that Dirac cones have merged. Our scheme provides a direct evidence of the bulk-edge correspondence in these systems, and opens the door to the exploration of more complex topological effects, for example involving disorder and interactions.
△ Less
Submitted 23 June, 2020; v1 submitted 21 February, 2020;
originally announced February 2020.
-
Direct observation of photonic Landau levels and helical edge states in strained honeycomb lattices
Authors:
O. Jamadi,
E. Rozas,
G. Salerno,
M. Milićević,
T. Ozawa,
I. Sagnes,
A. Lemaître,
L. Le Gratiet,
A. Harouri,
I. Carusotto,
J. Bloch,
A. Amo
Abstract:
We report the realization of a synthetic magnetic field for photons and polaritons in a honeycomb lattice of coupled semiconductor micropillars. A strong synthetic field is induced in both the s and p orbital bands by engineering a uniaxial hop** gradient in the lattice, giving rise to the formation of Landau levels at the Dirac points. We provide direct evidence of the sublattice symmetry break…
▽ More
We report the realization of a synthetic magnetic field for photons and polaritons in a honeycomb lattice of coupled semiconductor micropillars. A strong synthetic field is induced in both the s and p orbital bands by engineering a uniaxial hop** gradient in the lattice, giving rise to the formation of Landau levels at the Dirac points. We provide direct evidence of the sublattice symmetry breaking of the lowest-order Landau level wavefunction, a distinctive feature of synthetic magnetic fields. Our realization implements helical edge states in the gap between n=0 and n=1 Landau levels, experimentally demonstrating a novel way of engineering propagating edge states in photonic lattices. In light of recent advances in the enhancement of polariton-polariton nonlinearities, the Landau levels reported here are promising for the study of the interplay between pseudomagnetism and interactions in a photonic system.
△ Less
Submitted 5 January, 2021; v1 submitted 28 January, 2020;
originally announced January 2020.
-
Optimal architecture for diamond-based wide-field thermal imaging
Authors:
R. Tanos,
W. Akhtar,
S. Monneret,
F. Favaro de Oliveira,
G. Seniutinas,
M. Munsch,
P. Maletinsky,
L. le Gratiet,
I. Sagnes,
A. Dréau,
C. Gergely,
V. Jacques,
G. Baffou,
I. Robert-Philip
Abstract:
Nitrogen-Vacancy centers in diamond possess an electronic spin resonance that strongly depends on temperature, which makes them efficient temperature sensor with a sensitivity down to a few mK/$\sqrt{\rm Hz}$. However, the high thermal conductivity of the host diamond may strongly damp any temperature variations, leading to invasive measurements when probing local temperature distributions. In vie…
▽ More
Nitrogen-Vacancy centers in diamond possess an electronic spin resonance that strongly depends on temperature, which makes them efficient temperature sensor with a sensitivity down to a few mK/$\sqrt{\rm Hz}$. However, the high thermal conductivity of the host diamond may strongly damp any temperature variations, leading to invasive measurements when probing local temperature distributions. In view of determining possible and optimal configurations for diamond-based wide-field thermal imaging, we here investigate, both experimentally and numerically, the effect of the presence of diamond on microscale temperature distributions. Three geometrical configurations are studied: a bulk diamond substrate, a thin diamond layer bonded on quartz and diamond nanoparticles dispersed on quartz. We show that the use of bulk diamond substrates for thermal imaging is highly invasive, in the sense that it prevents any substantial temperature increase. Conversely, thin diamond layers partly solve this issue and could provide a possible alternative for microscale thermal imaging. Dispersions of diamond nanoparticles throughout the sample appear as the most relevant approach as they do not affect the temperature distribution, although NV centers in nanodiamonds yield lower temperature sensitivities compared to bulk diamond.
△ Less
Submitted 27 January, 2020;
originally announced January 2020.
-
Emergence of criticality through a cascade of delocalization transitions in quasiperiodic chains
Authors:
V. Goblot,
A. Štrkalj,
N. Pernet,
J. L. Lado,
C. Dorow,
A. Lemaître,
L. Le Gratiet,
A. Harouri,
I. Sagnes,
S. Ravets,
A. Amo,
J. Bloch,
O. Zilberberg
Abstract:
Conduction through materials crucially depends on how ordered they are. Periodically ordered systems exhibit extended Bloch waves that generate metallic bands, whereas disorder is known to limit conduction and localize the motion of particles in a medium. In this context, quasiperiodic systems, which are neither periodic nor disordered, reveal exotic conduction properties, self-similar wavefunctio…
▽ More
Conduction through materials crucially depends on how ordered they are. Periodically ordered systems exhibit extended Bloch waves that generate metallic bands, whereas disorder is known to limit conduction and localize the motion of particles in a medium. In this context, quasiperiodic systems, which are neither periodic nor disordered, reveal exotic conduction properties, self-similar wavefunctions, and critical phenomena. Here, we explore the localization properties of waves in a novel family of quasiperiodic chains obtained when continuously interpolating between two paradigmatic limits: the Aubry-André model, famous for its metal-to-insulator transition, and the Fibonacci chain, known for its critical nature. Using both theoretical analysis and experiments on cavity-polariton devices, we discover that the Aubry-André model evolves into criticality through a cascade of band-selective localization/delocalization transitions that iteratively shape the self-similar critical wavefunctions of the Fibonacci chain. Our findings offer (i) a unique new insight into understanding the criticality of quasiperiodic chains, (ii) a controllable knob by which to engineer band-selective pass filters, and (iii) a versatile experimental platform with which to further study the interplay of many-body interactions and dissipation in a wide range of quasiperiodic models.
△ Less
Submitted 18 November, 2019;
originally announced November 2019.
-
Parametric instability in coupled nonlinear microcavities
Authors:
N. Carlon Zambon,
S. R. K. Rodriguez,
A. Lemaitre,
A. Harouri,
L. Le Gratiet,
I. Sagnes,
P. St-Jean,
S. Ravets,
A. Amo,
J. Bloch
Abstract:
We report the observation of a parametric instability in the out-of-equilibrium steady state of two coupled Kerr microresonators coherently driven by a laser. Using a resonant excitation, we drive the system into an unstable regime, where we observe the appearance of intense and well resolved sideband modes in the emission spectrum. This feature is a characteristic signature of self-sustained osci…
▽ More
We report the observation of a parametric instability in the out-of-equilibrium steady state of two coupled Kerr microresonators coherently driven by a laser. Using a resonant excitation, we drive the system into an unstable regime, where we observe the appearance of intense and well resolved sideband modes in the emission spectrum. This feature is a characteristic signature of self-sustained oscillations of the intracavity field. We comprehensively model our findings using semiclassical Langevin equations for the cavity field dynamics combined with a linear stability analysis. The inherent scalability of our semiconductor platform, enriched with a strong Kerr nonlinearity, is promising for the realization of integrated optical parametric oscillator networks operating in a few-photon regime.
△ Less
Submitted 7 November, 2019;
originally announced November 2019.
-
Multi-orbital tight binding model for cavity-polariton lattices
Authors:
Franco Mangussi,
Marijana Milićević,
Isabelle Sagnes,
Luc Le Gratiet,
Abdelmounaim Harouri,
Aristide Lemaître,
Jacqueline Bloch,
Alberto Amo,
Gonzalo Usaj
Abstract:
In this work we present a tight-binding model that allows to describe with a minimal amount of parameters the band structure of exciton-polariton lattices. This model based on $s$ and $p$ non-orthogonal photonic orbitals faithfully reproduces experimental results reported for polariton graphene ribbons. We analyze in particular the influence of the non-orthogonality, the inter-orbitals interaction…
▽ More
In this work we present a tight-binding model that allows to describe with a minimal amount of parameters the band structure of exciton-polariton lattices. This model based on $s$ and $p$ non-orthogonal photonic orbitals faithfully reproduces experimental results reported for polariton graphene ribbons. We analyze in particular the influence of the non-orthogonality, the inter-orbitals interaction and the photonic spin-orbit coupling on the polarization and dispersion of bulk bands and edge states.
△ Less
Submitted 31 July, 2019;
originally announced July 2019.
-
Nonlinear Polariton Fluids in a Flatband Reveal Discrete Gap Solitons
Authors:
V. Goblot,
B. Rauer,
F. Vicentini,
A. Le Boité,
E. Galopin,
A. Lemaître,
L. Le Gratiet,
A. Harouri,
I. Sagnes,
S. Ravets,
C. Ciuti,
A. Amo,
J. Bloch
Abstract:
Phase frustration in periodic lattices is responsible for the formation of dispersionless flat bands. The absence of any kinetic energy scale makes flat band physics critically sensitive to perturbations and interactions. We report here on the experimental investigation of the nonlinear dynamics of cavity polaritons in the gapped flat band of a one-dimensional Lieb lattice. We observe the formatio…
▽ More
Phase frustration in periodic lattices is responsible for the formation of dispersionless flat bands. The absence of any kinetic energy scale makes flat band physics critically sensitive to perturbations and interactions. We report here on the experimental investigation of the nonlinear dynamics of cavity polaritons in the gapped flat band of a one-dimensional Lieb lattice. We observe the formation of gap solitons with quantized size and very abrupt edges, signature of the frozen propagation of switching fronts. This type of gap solitons belongs to the class of truncated Bloch waves, and had only been observed in closed systems up to now. Here the driven-dissipative character of the system gives rise to a complex multistability of the nonlinear domains generated in the flat band. These results open up interesting perspective regarding more complex 2D lattices and the generation of correlated photon phases.
△ Less
Submitted 17 September, 2019; v1 submitted 9 May, 2019;
originally announced May 2019.
-
Orbital angular momentum bistability in a microlaser
Authors:
Nicola Carlon Zambon,
Philippe St-Jean,
Aristide Lemaître,
Abdelmounaim Harouri,
Luc Le Gratiet,
Isabelle Sagnes,
Sylvain Ravets,
Alberto Amo,
Jacqueline Bloch
Abstract:
Light's orbital angular momentum (OAM) is an unbounded degree of freedom emerging in helical beams that appears very advantageous technologically. Using a chiral microlaser, i.e. an integrated device that allows generating an emission carrying a net OAM, we demonstrate a regime of bistability involving two modes presenting distinct OAM (L = 0 and L = 2). Furthermore, thanks to an engineered spin-o…
▽ More
Light's orbital angular momentum (OAM) is an unbounded degree of freedom emerging in helical beams that appears very advantageous technologically. Using a chiral microlaser, i.e. an integrated device that allows generating an emission carrying a net OAM, we demonstrate a regime of bistability involving two modes presenting distinct OAM (L = 0 and L = 2). Furthermore, thanks to an engineered spin-orbit coupling of light in the device, these modes also exhibit distinct polarization patterns, i.e. cirular and azimuthal polarizations. Using a dynamical model of rate euqations, we show that this bistability arises from polarization-dependent saturation of the gain medium. Such a bistable regime appears very promising for implementing ultrafast optical switches based on the OAM of light. As well, it paves the way to the exploration of dynamical processes involving phase and polarization vortices.
△ Less
Submitted 14 December, 2018;
originally announced December 2018.
-
Tilted and type-III Dirac cones emerging from flat bands in photonic orbital graphene
Authors:
M. Milićević,
G. Montambaux,
T. Ozawa,
I. Sagnes,
A. Lemaître,
L. Le Gratiet,
A. Harouri,
J. Bloch,
A. Amo
Abstract:
The extraordinary electronic properties of Dirac materials, the two-dimensional partners of Weyl semimetals, arise from the linear crossings in their band structure. When the dispersion around the Dirac points is tilted, the emergence of intricate transport phenomena has been predicted, such as modified Klein tunnelling, intrinsic anomalous Hall effects and ferrimagnetism. However, Dirac materials…
▽ More
The extraordinary electronic properties of Dirac materials, the two-dimensional partners of Weyl semimetals, arise from the linear crossings in their band structure. When the dispersion around the Dirac points is tilted, the emergence of intricate transport phenomena has been predicted, such as modified Klein tunnelling, intrinsic anomalous Hall effects and ferrimagnetism. However, Dirac materials are rare, particularly with tilted Dirac cones. Recently, artificial materials whose building blocks present orbital degrees of freedom have appeared as promising candidates for the engineering of exotic Dirac dispersions. Here we take advantage of the orbital structure of photonic resonators arranged in a honeycomb lattice to implement photonic lattices with semi-Dirac, tilted and, most interestingly, type-III Dirac cones that combine flat and linear dispersions. The tilted cones emerge from the touching of a flat and a parabolic band with a non-trivial topological charge. These results open the way to the synthesis of orbital Dirac matter with unconventional transport properties and, in combination with polariton nonlinearities, to the study of topological and Dirac superfluids in photonic lattices.
△ Less
Submitted 23 July, 2018;
originally announced July 2018.
-
Lasing in optically induced gap states in photonic graphene
Authors:
M. Milićević,
O. Bleu,
D. D. Solnyshkov,
I. Sagnes,
A. Lemaître,
L. Le Gratiet,
A. Harouri,
J. Bloch,
G. Malpuech,
A. Amo
Abstract:
We report polariton lasing in localised gap states in a honeycomb lattice of coupled micropillars. Localisation of the modes is induced by the optical potential created by the excitation beam, requiring no additional engineering of the otherwise homogeneous polariton lattice. The spatial shape of the gap states arises from the interplay of the orbital angular momentum eigenmodes of the cylindrical…
▽ More
We report polariton lasing in localised gap states in a honeycomb lattice of coupled micropillars. Localisation of the modes is induced by the optical potential created by the excitation beam, requiring no additional engineering of the otherwise homogeneous polariton lattice. The spatial shape of the gap states arises from the interplay of the orbital angular momentum eigenmodes of the cylindrical potential created by the excitation beam and the hexagonal symmetry of the underlying lattice. Our results provide insights into the engineering of defect states in two-dimensional lattices.
△ Less
Submitted 12 November, 2018; v1 submitted 11 June, 2018;
originally announced June 2018.
-
Unstable and stable regimes of polariton condensation
Authors:
F. Baboux,
D. De Bernardis,
V. Goblot,
V. N. Gladilin,
C. Gomez,
E. Galopin,
L. Le Gratiet,
A. Lemaître,
I. Sagnes,
I. Carusotto,
M. Wouters,
A. Amo,
J. Bloch
Abstract:
Modulational instabilities play a key role in a wide range of nonlinear optical phenomena, leading e.g. to the formation of spatial and temporal solitons, rogue waves and chaotic dynamics. Here we experimentally demonstrate the existence of a modulational instability in condensates of cavity polaritons, arising from the strong coupling of cavity photons with quantum well excitons. For this purpose…
▽ More
Modulational instabilities play a key role in a wide range of nonlinear optical phenomena, leading e.g. to the formation of spatial and temporal solitons, rogue waves and chaotic dynamics. Here we experimentally demonstrate the existence of a modulational instability in condensates of cavity polaritons, arising from the strong coupling of cavity photons with quantum well excitons. For this purpose we investigate the spatiotemporal coherence properties of polariton condensates in GaAs-based microcavities under continuous-wave pum**. The chaotic behavior of the instability results in a strongly reduced spatial and temporal coherence and a significantly inhomogeneous density. Additionally we show how the instability can be tamed by introducing a periodic potential so that condensation occurs into negative mass states, leading to largely improved coherence and homogeneity. These results pave the way to the exploration of long-range order in dissipative quantum fluids of light within a controlled platform.
△ Less
Submitted 29 March, 2018; v1 submitted 18 July, 2017;
originally announced July 2017.
-
Lasing in topological edge states of a 1D lattice
Authors:
P. St-Jean,
V. Goblot,
E. Galopin,
A. Lemaître,
T. Ozawa,
L. Le Gratiet,
I. Sagnes,
J. Bloch,
A. Amo
Abstract:
Topology describes properties that remain unaffected by smooth distortions. Its main hallmark is the emergence of edge states localized at the boundary between regions characterized by distinct topological invariants. This feature offers new opportunities for robust trap** of light in nano- and micro-meter scale systems subject to fabrication imperfections and to environmentally induced deformat…
▽ More
Topology describes properties that remain unaffected by smooth distortions. Its main hallmark is the emergence of edge states localized at the boundary between regions characterized by distinct topological invariants. This feature offers new opportunities for robust trap** of light in nano- and micro-meter scale systems subject to fabrication imperfections and to environmentally induced deformations. Here we show lasing in such topological edge states of a one-dimensional lattice of polariton micropillars that implements an orbital version of the Su-Schrieffer-Heeger Hamiltonian. We further demonstrate that lasing in these states persists under local deformations of the lattice. These results open the way to the implementation of chiral lasers in systems with broken time-reversal symmetry and, when combined with polariton interactions, to the study of nonlinear topological photonics.
△ Less
Submitted 24 April, 2017;
originally announced April 2017.
-
Uncertainty and sensitivity analysis of functional risk curves based on Gaussian processes
Authors:
Bertrand Iooss,
Loïc Le Gratiet
Abstract:
A functional risk curve gives the probability of an undesirable event as a function of the value of a critical parameter of a considered physical system. In several applicative situations, this curve is built using phenomenological numerical models which simulate complex physical phenomena. To avoid cpu-time expensive numerical models, we propose to use Gaussian process regression to build functio…
▽ More
A functional risk curve gives the probability of an undesirable event as a function of the value of a critical parameter of a considered physical system. In several applicative situations, this curve is built using phenomenological numerical models which simulate complex physical phenomena. To avoid cpu-time expensive numerical models, we propose to use Gaussian process regression to build functional risk curves. An algorithm is given to provide confidence bounds due to this approximation. Two methods of global sensitivity analysis of the models' random input parameters on the functional risk curve are also studied. In particular, the PLI sensitivity indices allow to understand the effect of misjudgment on the input parameters' probability density functions.
△ Less
Submitted 25 July, 2017; v1 submitted 3 April, 2017;
originally announced April 2017.
-
Orbital edge states in a photonic honeycomb lattice
Authors:
Marijana Milićević,
Tomoki Ozawa,
Gilles Montambaux,
Iacopo Carusotto,
Elisabeth Galopin,
Aristide Lemaître,
Luc Le Gratiet,
Isabelle Sagnes,
Jacqueline Bloch,
Alberto Amo
Abstract:
We experimentally reveal the emergence of edge states in a photonic lattice with orbital bands. We use a two-dimensional honeycomb lattice of coupled micropillars whose bulk spectrum shows four gapless bands arising from the coupling of $p$-like photonic orbitals. We observe zero-energy edge states whose topological origin is similar to that of conventional edge states in graphene. Additionally, w…
▽ More
We experimentally reveal the emergence of edge states in a photonic lattice with orbital bands. We use a two-dimensional honeycomb lattice of coupled micropillars whose bulk spectrum shows four gapless bands arising from the coupling of $p$-like photonic orbitals. We observe zero-energy edge states whose topological origin is similar to that of conventional edge states in graphene. Additionally, we report novel dispersive edge states that emerge not only in zigzag and bearded terminations, but also in armchair edges. The observations are reproduced by tight-binding and analytical calculations. Our work shows the potentiality of coupled micropillars in elucidating some of the electronic properties of emergent 2D materials with orbital bands.
△ Less
Submitted 21 September, 2016;
originally announced September 2016.
-
Probing a dissipative phase transition via dynamical optical hysteresis
Authors:
S. R. K. Rodriguez,
W. Casteels,
F. Storme,
N. Carlon Zambon,
I. Sagnes,
L. Le Gratiet,
E. Galopin,
A. Lemaitre,
A. Amo,
C. Ciuti,
J. Bloch
Abstract:
We experimentally explore the dynamic optical hysteresis of a semiconductor microcavity as a function of the sweep time. The hysteresis area exhibits a double power law decay due to the shot noise of the driving laser, which triggers switching between metastable states. Upon increasing the average photon number and approaching the thermodynamic limit, the double power law evolves into a single pow…
▽ More
We experimentally explore the dynamic optical hysteresis of a semiconductor microcavity as a function of the sweep time. The hysteresis area exhibits a double power law decay due to the shot noise of the driving laser, which triggers switching between metastable states. Upon increasing the average photon number and approaching the thermodynamic limit, the double power law evolves into a single power law. This algebraic behavior characterizes a dissipative phase transition. Our findings are in good agreement with theoretical predictions, and the present experimental approach is promising for the exploration of critical phenomena in photonic lattices.
△ Less
Submitted 8 February, 2017; v1 submitted 31 July, 2016;
originally announced August 2016.
-
Measuring topological invariants from generalized edge states in polaritonic quasicrystals
Authors:
F. Baboux,
E. Levy,
A. Lemaître,
C. Gomez,
E. Galopin,
L. Le Gratiet,
I. Sagnes,
A. Amo,
J. Bloch,
E. Akkermans
Abstract:
We investigate the topological properties of Fibonacci quasicrystals using cavity polaritons. Composite structures made of the concatenation of two Fibonacci sequences allow investigating generalized edge states forming in the gaps of the fractal energy spectrum. We employ these generalized edge states to determine the topological invariants of the quasicrystal. When varying a structural degree of…
▽ More
We investigate the topological properties of Fibonacci quasicrystals using cavity polaritons. Composite structures made of the concatenation of two Fibonacci sequences allow investigating generalized edge states forming in the gaps of the fractal energy spectrum. We employ these generalized edge states to determine the topological invariants of the quasicrystal. When varying a structural degree of freedom (phason) of the Fibonacci sequence, the edge states spectrally traverse the gaps, while their spatial symmetry switches: the periodicity of this spectral and spatial evolution yields direct measurements of the gap topological numbers. The topological invariants that we determine coincide with those assigned by the gap-labeling theorem, illustrating the direct connection between the fractal and topological properties of Fibonacci quasicrystals.
△ Less
Submitted 22 May, 2017; v1 submitted 13 July, 2016;
originally announced July 2016.
-
Metamodel-based sensitivity analysis: Polynomial chaos expansions and Gaussian processes
Authors:
L. Le Gratiet,
S. Marelli,
B. Sudret
Abstract:
Global sensitivity analysis is now established as a powerful approach for determining the key random input parameters that drive the uncertainty of model output predictions. Yet the classical computation of the so-called Sobol' indices is based on Monte Carlo simulation, which is not affordable when computationally expensive models are used, as it is the case in most applications in engineering an…
▽ More
Global sensitivity analysis is now established as a powerful approach for determining the key random input parameters that drive the uncertainty of model output predictions. Yet the classical computation of the so-called Sobol' indices is based on Monte Carlo simulation, which is not affordable when computationally expensive models are used, as it is the case in most applications in engineering and applied sciences. In this respect metamodels such as polynomial chaos expansions (PCE) and Gaussian processes (GP) have received tremendous attention in the last few years, as they allow one to replace the original, taxing model by a surrogate which is built from an experimental design of limited size. Then the surrogate can be used to compute the sensitivity indices in negligible time. In this chapter an introduction to each technique is given, with an emphasis on their strengths and limitations in the context of global sensitivity analysis. In particular, Sobol' (resp. total Sobol') indices can be computed analytically from the PCE coefficients. In contrast, confidence intervals on sensitivity indices can be derived straightforwardly from the properties of GPs. The performance of the two techniques is finally compared on three well-known analytical benchmarks (Ishigami, G-Sobol and Morris functions) as well as on a realistic engineering application (deflection of a truss structure).
△ Less
Submitted 14 June, 2016;
originally announced June 2016.
-
Interaction-induced hop** phase in driven-dissipative coupled photonic microcavities
Authors:
S. R. K. Rodriguez,
A. Amo,
I. Sagnes,
L. Le Gratiet,
E. Galopin,
A. Lemaitre,
J. Bloch
Abstract:
Bosons hop** across sites and interacting on-site are the essence of the Bose-Hubbard model (BHM). Inspired by the success of BHM simulators with atoms in optical lattices, proposals for implementing the BHM with photons in coupled nonlinear cavities have emerged. Two coupled semiconductor microcavities constitute a model system where the hop**, interaction, and decay of exciton polaritons ---…
▽ More
Bosons hop** across sites and interacting on-site are the essence of the Bose-Hubbard model (BHM). Inspired by the success of BHM simulators with atoms in optical lattices, proposals for implementing the BHM with photons in coupled nonlinear cavities have emerged. Two coupled semiconductor microcavities constitute a model system where the hop**, interaction, and decay of exciton polaritons --- mixed light-matter quasiparticles --- can be engineered in combination with site-selective coherent driving to implement the driven-dissipative two-site optical BHM. Here we explore the interplay of interference and nonlinearity in this system, in a regime where three distinct density profiles can be observed under identical driving conditions. We demonstrate how the phase acquired by polaritons hop** between cavities can be controlled through effective polariton-polariton interactions. Our results open new perspectives for synthesizing density-dependent gauge fields for polaritons in two-dimensional multicavity systems.
△ Less
Submitted 23 February, 2016;
originally announced February 2016.
-
Model Assisted Probability of Detection curves: New statistical tools and progressive methodology
Authors:
Loïc Le Gratiet,
Bertrand Iooss,
Géraud Blatman,
Thomas Browne,
Sara Cordeiro,
Benjamin Goursaud
Abstract:
The Probability Of Detection (POD) curve is a standard tool in several industries to evaluate the performance of Non Destructive Testing (NDT) procedures for the detection of harmful defects for the inspected structure. Due to new capabilities of NDT process numerical simulation , Model Assisted Probability of Detection (MAPOD) approaches have also been recently developed. In this paper, a generic…
▽ More
The Probability Of Detection (POD) curve is a standard tool in several industries to evaluate the performance of Non Destructive Testing (NDT) procedures for the detection of harmful defects for the inspected structure. Due to new capabilities of NDT process numerical simulation , Model Assisted Probability of Detection (MAPOD) approaches have also been recently developed. In this paper, a generic and progressive MAPOD methodology is proposed. Limits and assumptions of the classical methods are enlightened, while new metamodel-based methods are proposed. They allow to access to relevant information based on sensitivity analysis of MAPOD inputs. Applications are performed on Eddy Current Non Destructive Examination numerical data.
△ Less
Submitted 22 January, 2016;
originally announced January 2016.
-
Stochastic simulators based optimization by Gaussian process metamodels -- Application to maintenance investments planning issues
Authors:
Thomas Browne,
Bertrand Iooss,
Loïc Le Gratiet,
Jérôme Lonchampt,
Emmanuel Remy
Abstract:
This paper deals with the optimization of industrial asset management strategies, whose profitability is characterized by the Net Present Value (NPV) indicator which is assessed by a Monte Carlo simulator. The developed method consists in building a metamodel of this stochastic simulator, allowing to get, for a given model input, the NPV probability distribution without running the simulator. The…
▽ More
This paper deals with the optimization of industrial asset management strategies, whose profitability is characterized by the Net Present Value (NPV) indicator which is assessed by a Monte Carlo simulator. The developed method consists in building a metamodel of this stochastic simulator, allowing to get, for a given model input, the NPV probability distribution without running the simulator. The present work is concentrated on the emulation of the quantile function of the stochastic simulator by interpolating well chosen basis functions and metamodeling their coefficients (using the Gaussian process metamodel). This quantile function metamodel is then used to treat a problem of strategy maintenance optimization (four systems installed on different plants), in order to optimize an NPV quantile. Using the Gaussian process framework, an adaptive design method (called QFEI) is defined by extending in our case the well known EGO algorithm. This allows to obtain an "optimal" solution using a small number of simulator runs.
△ Less
Submitted 3 May, 2016; v1 submitted 22 December, 2015;
originally announced December 2015.
-
Stochastic simulators based optimization by Gaussian process metamodels - Application to maintenance investments planning issues
Authors:
Thomas Browne,
Bertrand Iooss,
Loïc Le Gratiet,
Jérome Lonchampt
Abstract:
This paper deals with the construction of a metamodel (i.e. a simplified mathematical model) for a stochastic computer code (also called stochastic numerical model or stochastic simulator), where stochastic means that the code maps the realization of a random variable. The goal is to get, for a given model input, the main information about the output probability distribution by using this metamode…
▽ More
This paper deals with the construction of a metamodel (i.e. a simplified mathematical model) for a stochastic computer code (also called stochastic numerical model or stochastic simulator), where stochastic means that the code maps the realization of a random variable. The goal is to get, for a given model input, the main information about the output probability distribution by using this metamodel and without running the computer code. In practical applications, such a metamodel enables one to have estimations of every possible random variable properties, such as the expectation, the probability of exceeding a threshold or any quantile. The present work is concentrated on the emulation of the quantile function of the stochastic simulator by interpolating well chosen basis function and metamodeling their coefficients (using the Gaussian process metamodel). This quantile function metamodel is then used to treat a simple optimization strategy maintenance problem using a stochastic code, in order to optimize the quantile of an economic indicator. Using the Gaussian process framework, an adaptive design method (called QFEI) is defined by extending in our case the well known EGO algorithm. This allows to obtain an "optimal" solution using a small number of simulator runs.
△ Less
Submitted 13 September, 2015;
originally announced September 2015.
-
Bosonic Condensation and Disorder-Induced Localization in a Flat Band
Authors:
F. Baboux,
L. Ge,
T. Jacqmin,
M. Biondi,
A. Lemaître,
L. Le Gratiet,
I. Sagnes,
S. Schmidt,
H. E. Türeci,
A. Amo,
J. Bloch
Abstract:
We report on the engineering of a non-dispersive (flat) energy band in a geometrically frustrated lattice of micro-pillar optical cavities. By taking advantage of the non-hermitian nature of our system, we achieve bosonic condensation of exciton-polaritons into the flat band. Due to the infinite effective mass in such band, the condensate is highly sensitive to disorder and fragments into localize…
▽ More
We report on the engineering of a non-dispersive (flat) energy band in a geometrically frustrated lattice of micro-pillar optical cavities. By taking advantage of the non-hermitian nature of our system, we achieve bosonic condensation of exciton-polaritons into the flat band. Due to the infinite effective mass in such band, the condensate is highly sensitive to disorder and fragments into localized modes reflecting the elementary eigenstates produced by geometric frustration. This realization offers a novel approach to studying coherent phases of light and matter under the controlled interplay of frustration, interactions and dissipation.
△ Less
Submitted 17 February, 2016; v1 submitted 21 May, 2015;
originally announced May 2015.
-
Edge states in polariton honeycomb lattices
Authors:
M. Milicevic,
T. Ozawa,
P. Andreakou,
I. Carusotto,
T. Jacqmin,
E. Galopin,
A. Lemaître,
L. Le Gratiet,
I. Sagnes,
J. Bloch,
A. Amo
Abstract:
The experimental study of edge states in atomically-thin layered materials remains a challenge due to the difficult control of the geometry of the sample terminations, the stability of dangling bonds and the need to measure local properties. In the case of graphene, localised edge modes have been predicted in zig-zag and bearded edges, characterised by flat dispersions connecting the Dirac points.…
▽ More
The experimental study of edge states in atomically-thin layered materials remains a challenge due to the difficult control of the geometry of the sample terminations, the stability of dangling bonds and the need to measure local properties. In the case of graphene, localised edge modes have been predicted in zig-zag and bearded edges, characterised by flat dispersions connecting the Dirac points. Polaritons in semiconductor microcavities have recently emerged as an extraordinary photonic platform to emulate 1D and 2D Hamiltonians, allowing the direct visualization of the wavefunctions in both real- and momentum-space as well as of the energy dispersion of eigenstates via photoluminescence experiments. Here we report on the observation of edge states in a honeycomb lattice of coupled micropillars. The lowest two bands of this structure arise from the coupling of the lowest energy modes of the micropillars, and emulate the π and π* bands of graphene. We show the momentum space dispersion of the edge states associated to the zig-zag and bearded edges, holding unidimensional quasi-flat bands. Additionally, we evaluate polarisation effects characteristic of polaritons on the properties of these states.
△ Less
Submitted 22 April, 2015;
originally announced April 2015.
-
ANOVA decomposition of conditional Gaussian processes for sensitivity analysis with dependent inputs
Authors:
Gaëlle Chastaing,
Loic Le Gratiet
Abstract:
Complex computer codes are widely used in science to model physical systems. Sensitivity analysis aims to measure the contributions of the inputs on the code output variability. An efficient tool to perform such analysis are the variance-based methods which have been recently investigated in the framework of dependent inputs. One of their issue is that they require a large number of runs for the c…
▽ More
Complex computer codes are widely used in science to model physical systems. Sensitivity analysis aims to measure the contributions of the inputs on the code output variability. An efficient tool to perform such analysis are the variance-based methods which have been recently investigated in the framework of dependent inputs. One of their issue is that they require a large number of runs for the complex simulators. To handle it, a Gaussian process regression model may be used to approximate the complex code. In this work, we propose to decompose a Gaussian process into a high dimensional representation. This leads to the definition of a variance-based sensitivity measure well tailored for non-independent inputs. We give a methodology to estimate these indices and to quantify their uncertainty. Finally, the approach is illustrated on toy functions and on a river flood model.
△ Less
Submitted 14 October, 2013;
originally announced October 2013.
-
A Bayesian approach for global sensitivity analysis of (multi-fidelity) computer codes
Authors:
Loic Le Gratiet,
Claire Cannamela,
Bertrand Iooss
Abstract:
Complex computer codes are widely used in science and engineering to model physical phenomena. Furthermore, it is common that they have a large number of input parameters. Global sensitivity analysis aims to identify those which have the most important impact on the output. Sobol indices are a popular tool to perform such analysis. However, their estimations require an important number of simulati…
▽ More
Complex computer codes are widely used in science and engineering to model physical phenomena. Furthermore, it is common that they have a large number of input parameters. Global sensitivity analysis aims to identify those which have the most important impact on the output. Sobol indices are a popular tool to perform such analysis. However, their estimations require an important number of simulations and often cannot be processed under reasonable time constraint. To handle this problem, a Gaussian process regression model is built to surrogate the computer code and the Sobol indices are estimated through it. The aim of this paper is to provide a methodology to estimate the Sobol indices through a surrogate model taking into account both the estimation errors and the surrogate model errors. In particular, it allows us to derive non-asymptotic confidence intervals for the Sobol index estimations. Furthermore, we extend the suggested strategy to the case of multi-fidelity computer codes which can be run at different levels of accuracy. For such simulators, we use an extension of Gaussian process regression models for multivariate outputs.
△ Less
Submitted 8 July, 2013;
originally announced July 2013.
-
Asymptotic normality of a Sobol index estimator in Gaussian process regression framework
Authors:
Loic Le Gratiet
Abstract:
Stochastic simulators such as Monte-Carlo estimators are widely used in science and engineering to study physical systems through their probabilistic representation. Global sensitivity analysis aims to identify the input parameters which have the most important impact on the output. A popular tool to perform global sensitivity analysis is the variance-based method which comes from the Hoeffding-So…
▽ More
Stochastic simulators such as Monte-Carlo estimators are widely used in science and engineering to study physical systems through their probabilistic representation. Global sensitivity analysis aims to identify the input parameters which have the most important impact on the output. A popular tool to perform global sensitivity analysis is the variance-based method which comes from the Hoeffding-Sobol decomposition. Nevertheless, this method requires an important number of simulations and is often unfeasible under reasonable time constraint. Therefore, an approximation of the input/output relation of the code is built with a Gaussian process regression model. This paper provides conditions which ensure the asymptotic normality of a Sobol's index estimator evaluated through this surrogate model. This result allows for building asymptotic confidence intervals for the considered Sobol index estimator. The presented method is successfully applied on an academic example on the heat equation.
△ Less
Submitted 31 May, 2013;
originally announced May 2013.
-
Kriging-based sequential design strategies using fast cross-validation techniques with extensions to multi-fidelity computer codes
Authors:
Loic Le Gratiet,
Claire Cannamela
Abstract:
Kriging-based surrogate models have become very popular during the last decades to approximate a computer code output from few simulations. In practical applications, it is very common to sequentially add new simulations to obtain more accurate approximations. We propose in this paper a method of kriging-based sequential design which combines both the error evaluation providing by the kriging mode…
▽ More
Kriging-based surrogate models have become very popular during the last decades to approximate a computer code output from few simulations. In practical applications, it is very common to sequentially add new simulations to obtain more accurate approximations. We propose in this paper a method of kriging-based sequential design which combines both the error evaluation providing by the kriging model and the observed errors of a Leave-One-Out cross-validation procedure. This method is proposed in two versions, the first one selects points one at-a-time. The second one allows us to parallelize the simulations and to add several design points at-a-time. Then, we extend these strategies to multi-fidelity co-kriging models which allow us to surrogate a complex code using fast approximations of it. The main advantage of these extensions is that it not only provides the new locations where to perform simulations but also which versions of code have to be simulated (between the complex one or one of its fast approximations). A real multi-fidelity application is used to illustrate the efficiency of the proposed approaches. In this example, the accurate code is a two-dimensional finite element model and the less accurate one is a one-dimensional approximation of the system.
△ Less
Submitted 29 October, 2012; v1 submitted 23 October, 2012;
originally announced October 2012.
-
Regularity dependence of the rate of convergence of the learning curve for Gaussian process regression
Authors:
Loic Le Gratiet,
Josselin Garnier
Abstract:
This paper deals with the speed of convergence of the learning curve in a Gaussian process regression framework. The learning curve describes the average generalization error of the Gaussian process used for the regression. More specifically, it is defined in this paper as the integral of the mean squared error over the input parameter space with respect to the probability measure of the input par…
▽ More
This paper deals with the speed of convergence of the learning curve in a Gaussian process regression framework. The learning curve describes the average generalization error of the Gaussian process used for the regression. More specifically, it is defined in this paper as the integral of the mean squared error over the input parameter space with respect to the probability measure of the input parameters. The main result is the proof of a theorem giving the mean squared error in function of the number of observations for a large class of kernels and for any dimension when the number of observations is large. From this result, we can deduce the asymptotic behavior of the generalization error. The presented proof generalizes previous ones that were limited to more specific kernels or to small dimensions (one or two). The result can be used to build an optimal strategy for resources allocation. This strategy is applied successfully to a nuclear safety problem.
△ Less
Submitted 10 January, 2013; v1 submitted 10 October, 2012;
originally announced October 2012.
-
Recursive co-kriging model for Design of Computer experiments with multiple levels of fidelity with an application to hydrodynamic
Authors:
Loic Le Gratiet
Abstract:
In many practical cases, a sensitivity analysis or an optimization of a complex time consuming computer code requires to build a fast running approximation of it - also called surrogate model. We consider in this paper the problem of building a surrogate model of a complex computer code which can be run at different levels of accuracy. The co-kriging based surrogate model is a promising tool to bu…
▽ More
In many practical cases, a sensitivity analysis or an optimization of a complex time consuming computer code requires to build a fast running approximation of it - also called surrogate model. We consider in this paper the problem of building a surrogate model of a complex computer code which can be run at different levels of accuracy. The co-kriging based surrogate model is a promising tool to build such an approximation. The idea is to improve the surrogate model by using fast and less accurate versions of the code. We present here a new approach to perform a multi-fidelity co-kriging model which is based on a recursive formulation. The strength of this new method is that the co-kriging model is built through a series of independent kriging models. From them, some properties of classical kriging models can naturally be extended to the presented co-kriging model such as a fast cross-validation procedure. Moreover, based on a Bayes linear formulation, an extension of the universal kriging equations are provided for the co-kriging model. Finally, the proposed model has the advantage to reduce the computational complexity compared to the previous models. The multi-fidelity model is successfully applied to emulate a hydrodynamic simulator. This real example illustrates the efficiency of the recursive model.
△ Less
Submitted 10 January, 2013; v1 submitted 2 October, 2012;
originally announced October 2012.
-
Planification d'expériences séquentielle dans un contexte de méta-modélisation multi-fidélité
Authors:
Loic Le Gratiet
Abstract:
Large computer codes are widely used in engineering to study physical systems. Nevertheless, simulations can sometimes be time-consuming. In this case, an approximation of the code input/output relation is made using a metamodel. Actually, a computer code can often be run at different levels of complexity and a hierarchy of levels of code can hence be obtained. For example, it can be a finite elem…
▽ More
Large computer codes are widely used in engineering to study physical systems. Nevertheless, simulations can sometimes be time-consuming. In this case, an approximation of the code input/output relation is made using a metamodel. Actually, a computer code can often be run at different levels of complexity and a hierarchy of levels of code can hence be obtained. For example, it can be a finite element model with a more or less fine mesh. The aim of our research is to study the use of several levels of a code to predict the output of a costly computer code. The presented multi-stage metamodel is a particular case of co-kriging which is a well-known geostatistical method. We first describe the construction of the co-kriging model and we focus then on a sequential experimental design strategy. Indeed, one of the strengths of co-kriging is that it provides through the predictive co-kriging variance an estimation of the model error at each point of the input space parameter. Therefore, to improve the surrogate model we can sequentially add points in the training set at locations where the predictive variances are the largest ones. Nonetheless, in a multi-fidelity framework, we also have to choose which level of code we have to run. We present here different strategies to choose this level. They are based on an original result which gives the contribution of each code on the co-kriging variance.
△ Less
Submitted 30 May, 2012;
originally announced May 2012.
-
Bayesian analysis of hierarchical multi-fidelity codes
Authors:
Loic Le Gratiet
Abstract:
This paper deals with the Gaussian process based approximation of a code which can be run at different levels of accuracy. This method, which is a particular case of co-kriging, allows us to improve a surrogate model of a complex computer code using fast approximations of it. In particular, we focus on the case of a large number of code levels on the one hand and on a Bayesian approach when we hav…
▽ More
This paper deals with the Gaussian process based approximation of a code which can be run at different levels of accuracy. This method, which is a particular case of co-kriging, allows us to improve a surrogate model of a complex computer code using fast approximations of it. In particular, we focus on the case of a large number of code levels on the one hand and on a Bayesian approach when we have two levels on the other hand. The main results of this paper are a new approach to estimate the model parameters which provides a closed form expression for an important parameter of the model (the scale factor), a reduction of the numerical complexity by simplifying the covariance matrix inversion, and a new Bayesian modelling that gives an explicit representation of the joint distribution of the parameters and that is not computationally expensive. A thermodynamic example is used to illustrate the comparison between 2-level and 3-level co-kriging.
△ Less
Submitted 24 September, 2012; v1 submitted 22 December, 2011;
originally announced December 2011.
-
Definition of the stimulated emission threshold in high-$β$ nanoscale lasers through phase-space reconstruction
Authors:
Hachair Xavier,
Rémy Braive,
Gian-Lucca Lippi,
Elvira David,
Luc Le Gratiet,
Aristide Lemaître,
Abram Izo,
Isabelle Sagnes,
Isabelle Robert-Philip,
Alexios Beveratos
Abstract:
Nanoscale lasers sustain few optical modes so that the fraction of spontaneous emission $β$ funnelled into the useful (lasing) mode is high (of the order of few 10$^{-1}$) and the threshold, which traditionally corresponds to an abrupt kink in the light in- light out curve, becomes ill-defined. We propose an alternative definition of the threshold, based on the dynamical response of the laser, whi…
▽ More
Nanoscale lasers sustain few optical modes so that the fraction of spontaneous emission $β$ funnelled into the useful (lasing) mode is high (of the order of few 10$^{-1}$) and the threshold, which traditionally corresponds to an abrupt kink in the light in- light out curve, becomes ill-defined. We propose an alternative definition of the threshold, based on the dynamical response of the laser, which is valid even for $β=1$ lasers. The laser dynamics is analyzed through a reconstruction of its phase-space trajectory for pulsed excitation. Crossing the threshold brings about a change in the shape of the trajectory and in the area contained in it. An unambiguous definition of the threshold in terms of this change is shown theoretically and illustrated experimentally in a photonic crystal laser.
△ Less
Submitted 16 February, 2011; v1 submitted 10 May, 2010;
originally announced May 2010.
-
Demonstration of coherent emission from high-$β$ photonic crystal nanolasers at room temperature
Authors:
Richard Hostein,
Remy Braive,
Luc Le Gratiet,
Anne Talneau,
Gregoire Beaudoin,
Isabelle Robert-Philip,
Isabelle Sagnes,
Alexios Beveratos
Abstract:
We report on lasing at room temperature and at telecommunications wavelength from photonic crystal nanocavities based on InAsP/InP quantum dots. Such laser cavities with a small modal volume and high quality factor display a high spontaneous emission coupling factor beta. Lasing is confirmed by measuring the second order autocorrelation function. A smooth transition from chaotic to coherent emissi…
▽ More
We report on lasing at room temperature and at telecommunications wavelength from photonic crystal nanocavities based on InAsP/InP quantum dots. Such laser cavities with a small modal volume and high quality factor display a high spontaneous emission coupling factor beta. Lasing is confirmed by measuring the second order autocorrelation function. A smooth transition from chaotic to coherent emission is observed, and coherent emission is obtained at 8 times the threshold power.
△ Less
Submitted 25 March, 2010;
originally announced March 2010.
-
Room temperature spontaneous emission enhancement from quantum dots in photonic crystal slab cavities in the telecommunications C-band
Authors:
Richard Hostein,
Rémy Braive,
Matthieu Larqué,
Ko-Hsin Lee,
Anne Talneau,
Luc Le Gratiet,
Isabelle Robert-Philip,
Isabelle Sagnes,
Alexios Beveratos
Abstract:
We report on the control of the spontaneous emission dynamics from InAsP self-assembled quantum dots emitting in the telecommunications C-band and weakly coupled to the mode of a double heterostructure cavity etched on a suspended InP membrane at room temperature. The quality factor of the cavity mode is 44x10^3 with an ultra-low modal volume of the order of 1.2 lambda/n)^3, inducing an enhancem…
▽ More
We report on the control of the spontaneous emission dynamics from InAsP self-assembled quantum dots emitting in the telecommunications C-band and weakly coupled to the mode of a double heterostructure cavity etched on a suspended InP membrane at room temperature. The quality factor of the cavity mode is 44x10^3 with an ultra-low modal volume of the order of 1.2 lambda/n)^3, inducing an enhancement of the spontaneous emission rate of up a factor of 2.8 at 300 K.
△ Less
Submitted 25 March, 2009;
originally announced March 2009.
