-
Thick-Target Neutron Yield from the 19F(alpha,n) Reaction
Authors:
E. B. Norman,
T. E. Chupp,
K. T. Lesko,
G. L. Woodruff,
P. J. Grant
Abstract:
Thick-target neutron yields from the 19F(alpha,n) reaction are reported for E(alpha) = 3.5 - 10.0 MeV.
Thick-target neutron yields from the 19F(alpha,n) reaction are reported for E(alpha) = 3.5 - 10.0 MeV.
△ Less
Submitted 10 January, 2015; v1 submitted 31 October, 2014;
originally announced November 2014.
-
Performance of Spatial Modulation using Measured Real-World Channels
Authors:
Abdelhamid Younis,
William Thompson,
Marco Di Renzo,
Cheng-Xiang Wang,
Mark A. Beach,
Harald Haas,
Peter M. Grant
Abstract:
In this paper, for the first time real-world channel measurements are used to analyse the performance of spatial modulation (SM), where a full analysis of the average bit error rate performance (ABER) of SM using measured urban correlated and uncorrelated Rayleigh fading channels is provided. The channel measurements are taken from an outdoor urban multiple input multiple output (MIMO) measurement…
▽ More
In this paper, for the first time real-world channel measurements are used to analyse the performance of spatial modulation (SM), where a full analysis of the average bit error rate performance (ABER) of SM using measured urban correlated and uncorrelated Rayleigh fading channels is provided. The channel measurements are taken from an outdoor urban multiple input multiple output (MIMO) measurement campaign. Moreover, ABER performance results using simulated Rayleigh fading channels are provided and compared with a derived analytical bound for the ABER of SM, and the ABER results for SM using the measured urban channels. The ABER results using the measured urban channels validate the derived analytical bound and the ABER results using the simulated channels.
Finally, the ABER of SM is compared with the performance of spatial multiplexing (SMX) using the measured urban channels for small and large scale MIMO. It is shown that SM offers nearly the same or a slightly better performance than SMX for small scale MIMO. However, SM offers large reduction in ABER for large scale MIMO.
△ Less
Submitted 15 May, 2013;
originally announced May 2013.
-
Practical Implementation of Spatial Modulation
Authors:
N. Serafimovski,
A. Younis,
R. Mesleh,
P. Chambers,
M. Di Renzo,
C. X. Wang,
P. M. Grant,
M. A. Beach,
H. Haas
Abstract:
In this work we seek to characterise the performance of spatial modulation (SM) and spatial multiplexing (SMX) with an experimental test bed. Two National Instruments (NI)-PXIe devices are used for the system testing, one for the transmitter and one for the receiver. The digital signal processing that formats the information data in preparation of transmission is described along with the digital s…
▽ More
In this work we seek to characterise the performance of spatial modulation (SM) and spatial multiplexing (SMX) with an experimental test bed. Two National Instruments (NI)-PXIe devices are used for the system testing, one for the transmitter and one for the receiver. The digital signal processing that formats the information data in preparation of transmission is described along with the digital signal processing that recovers the information data. In addition, the hardware limitations of the system are also analysed. The average bit error ratio (ABER) of the system is validated through both theoretical analysis and simulation results for SM and SMX under line of sight (LoS) channel conditions.
△ Less
Submitted 3 June, 2013; v1 submitted 3 May, 2013;
originally announced May 2013.
-
Practical Analysis of Codebook Design and Frequency Offset Estimation for Virtual-MIMO Systems
Authors:
**g Jiang,
John S. Thompson,
Hongjian Sun,
Peter M. Grant
Abstract:
A virtual multiple-input multiple-output (MIMO) wireless system using the receiver-side cooperation with the compress-and-forward (CF) protocol, is an alternative to a point-to-point MIMO system, when a single receiver is not equipped with multiple antennas. It is evident that the practicality of CF cooperation will be greatly enhanced if an efficient source coding technique can be used at the rel…
▽ More
A virtual multiple-input multiple-output (MIMO) wireless system using the receiver-side cooperation with the compress-and-forward (CF) protocol, is an alternative to a point-to-point MIMO system, when a single receiver is not equipped with multiple antennas. It is evident that the practicality of CF cooperation will be greatly enhanced if an efficient source coding technique can be used at the relay. It is even more desirable that CF cooperation should not be unduly sensitive to carrier frequency offsets (CFOs). This paper presents a practical study of these two issues. Firstly, codebook designs of the Voronoi vector quantization (VQ) and the tree-structure vector quantization (TSVQ) to enable CF cooperation at the relay are described. A comparison in terms of the codebook design and encoding complexity is analyzed. It is shown that the TSVQ is much simpler to design and operate, and can achieve a favorable performance-complexity tradeoff. Furthermore, this paper demonstrates that CFO can lead to significant performance degradation for the virtual MIMO system. To overcome this, it is proposed to maintain clock synchronization and jointly estimate the CFO between the relay and the destination. This approach is shown to provide a significant performance improvement.
△ Less
Submitted 7 February, 2013;
originally announced February 2013.
-
Analysis of Gamma Rays and Cosmic Muons with a Single Detector
Authors:
Abdel G. Bachri,
Perry C. Grant,
Azriel Goldschmidt
Abstract:
We report on the construction and upgrade of a Lawrence Berkeley National Laboratory Cosmic Muons Detector. We modify the electronics and mechanics to achieve a highly efficient gamma-ray and cosmic-ray detector. Each detector module uses a one-inch-thick scintillator, attached to a photomultiplier tube (PMT) and mounted on a solid aluminum frame. The detector uses scintillation to transform passi…
▽ More
We report on the construction and upgrade of a Lawrence Berkeley National Laboratory Cosmic Muons Detector. We modify the electronics and mechanics to achieve a highly efficient gamma-ray and cosmic-ray detector. Each detector module uses a one-inch-thick scintillator, attached to a photomultiplier tube (PMT) and mounted on a solid aluminum frame. The detector uses scintillation to transform passing radiation into detectable photons that are guided toward a photocathode surface of the PMT, triggering the release of photoelectrons that are then amplified to yield measurable electronic signals. The modules were connected to an electronics section that compared the signals from the two PMTs and logically determined if they were coincidence events. A data-collection device was added for faster and prolonged count rates. A cobalt-60, which produced two gamma rays and a beta particle has been used as a calibration source. To investigate the isotropic behavior of radiation, two detection modules were adjusted to different angles of rotation with respect to each other, and the coincidence counts were measured. The coincidence counts from the modules set at various angles were consistent throughout the angular spectrum, and only lead shielding visibly reduced the number of counts from the radioactive source. The inverse-square-law behavior of radiation has also been considered. The results were such that the number of counts decreased as a function of increasing distance from the source. Furthermore, positioning the detector to point toward the sky in different orientations, we measured cosmic ray muon flux as the angle from the vertical was decreased. In doing so, we scanned different patches of the atmosphere. For the optimum operation during the detection phase, we plateaued both PMTs to single out their best operating gain voltage while eliminating false background noise signals.
△ Less
Submitted 22 July, 2011;
originally announced July 2011.
-
Reaction rate sensitivity of 44Ti production in massive stars and implications of a thick target yield measurement of 40Ca(alpha,gamma)44Ti
Authors:
R. D. Hoffman,
S. A. Sheets,
J. T. Burke,
N. D. Scielzo,
T. Rauscher,
E. B. Norman,
S. Tumey,
T. A. Brown,
P. G. Grant,
A. M. Hurst,
L. Phair,
M. A. Stoyer,
T. Wooddy,
J. L. Fisker,
D. Bleuel
Abstract:
We evaluate two dominant nuclear reaction rates and their uncertainties that affect 44Ti production in explosive nucleosynthesis. Experimentally we develop thick-target yields for the 40Ca(alpha,gamma)44Ti reaction at E(alpha) = 4.13, 4.54, and 5.36 MeV using gamma-ray spectroscopy. At the highest beam energy, we also performed an activation measurement that agrees with the thick target result.…
▽ More
We evaluate two dominant nuclear reaction rates and their uncertainties that affect 44Ti production in explosive nucleosynthesis. Experimentally we develop thick-target yields for the 40Ca(alpha,gamma)44Ti reaction at E(alpha) = 4.13, 4.54, and 5.36 MeV using gamma-ray spectroscopy. At the highest beam energy, we also performed an activation measurement that agrees with the thick target result. From the measured yields a stellar reaction rate was developed that is smaller than current statistical-model calculations and recent experimental results, which would suggest lower 44Ti production in scenarios for the alpha-rich freeze out. Special attention has been paid to assessing realistic uncertainties of stellar rates produced from a combination of experimental and theoretical cross sections, which we use to develop a re-evaluation of the 44Ti(alpha,p)47V reaction rate. Using these we carry out a sensitivity survey of 44Ti synthesis in eight expansions representing peak temperature and density conditions drawn from a suite of recent supernova explosion models. Our results suggest that the current uncertainty in these two reaction rates could lead to as large an uncertainty in 44Ti synthesis as that produced by different treatments of stellar physics.
△ Less
Submitted 15 May, 2010; v1 submitted 27 February, 2010;
originally announced March 2010.
-
Stable mode-locked pulses from mid-infrared semiconductor lasers
Authors:
Christine Y. Wang,
L. Kuznetsova,
V. M. Gkortsas,
L. Diehl,
F. X. Kaertner,
M. A. Belkin,
A. Belyanin,
X. Li,
D. Ham,
H Schneider,
P. Grant,
C. Y. Song,
S. Haffouz,
Z. R. Wasilewski,
H. C. Liu,
Federico Capasso
Abstract:
We report the unequivocal demonstration of mid-infrared mode-locked pulses from a semiconductor laser. The train of short pulses was generated by actively modulating the current and hence the optical gain in a small section of an edge-emitting quantum cascade laser (QCL). Pulses with pulse duration at full-width-at-half-maximum of about 3 ps and energy of 0.5 pJ were characterized using a second…
▽ More
We report the unequivocal demonstration of mid-infrared mode-locked pulses from a semiconductor laser. The train of short pulses was generated by actively modulating the current and hence the optical gain in a small section of an edge-emitting quantum cascade laser (QCL). Pulses with pulse duration at full-width-at-half-maximum of about 3 ps and energy of 0.5 pJ were characterized using a second-order interferometric autocorrelation technique based on a nonlinear quantum well infrared photodetector. The mode-locking dynamics in the QCLs was modelled and simulated based on Maxwell-Bloch equations in an open two-level system. We anticipate our results to be a significant step toward a compact, electrically-pumped source generating ultrashort light pulses in the mid-infrared and terahertz spectral ranges.
△ Less
Submitted 25 March, 2009;
originally announced March 2009.
-
Program to calculate pure angular momentum coefficients in jj-coupling
Authors:
G. Gaigalas,
S. Fritzsche,
I. P. Grant
Abstract:
A program for computing pure angular momentum coefficients in relativistic atomic structure for any scalar one- and two-particle operator is presented. The program, written in Fortran 90/95 and based on techniques of second quantization, irreducible tensorial operators, quasispin and the theory of angular momentum, is intended to replace existing angular coefficient modules from GRASP92. The new…
▽ More
A program for computing pure angular momentum coefficients in relativistic atomic structure for any scalar one- and two-particle operator is presented. The program, written in Fortran 90/95 and based on techniques of second quantization, irreducible tensorial operators, quasispin and the theory of angular momentum, is intended to replace existing angular coefficient modules from GRASP92. The new module uses a different decomposition of the coefficients as sums of products of pure angular momentum coefficients, which depend only on the tensor rank of the interaction but not on its details, with effective interaction strengths of specific interactions. This saves memory and reduces the computational cost of big calculations signficantly.
△ Less
Submitted 25 May, 2004;
originally announced May 2004.
-
Aerogel keystones: extraction of complete hypervelocity impact events from aerogel collectors
Authors:
Andrew J. Westphal,
Christopher J. Snead,
Anna L. Butterworth,
Giles A. Graham,
John P. Bradley,
Sasa Bajt,
Patrick G. Grant,
Graham Bench,
Sean Brennan,
Piero Pianetta
Abstract:
In January 2006, the Stardust mission will return the first samples from a solid solar-system body since Apollo, and the first samples of contemporary interstellar dust ever collected. Although sophisticated laboratory instruments exist for the analysis of Stardust samples, techniques for the recovery of particles and particle residues from aerogel collectors remain primitive. Here we describe o…
▽ More
In January 2006, the Stardust mission will return the first samples from a solid solar-system body since Apollo, and the first samples of contemporary interstellar dust ever collected. Although sophisticated laboratory instruments exist for the analysis of Stardust samples, techniques for the recovery of particles and particle residues from aerogel collectors remain primitive. Here we describe our recent progress in develo** techniques for extracting small volumes of aerogel, which we have called ``keystones,'' which completely contain particle impacts but minimize the damage to the surrounding aerogel collector. These keystones can be fixed to custom-designed micromachined silicon fixtures (so-called ``microforklifts''). In this configuration the samples are self-supporting, which can be advantageous in situations in which interference from a supporting substrate is undesirable. The keystones may also be extracted and placed onto a substrate without a fixture. We have also demonstrated the capability of homologously crushing these unmounted keystones for analysis techniques which demand flat samples.
△ Less
Submitted 17 December, 2003;
originally announced December 2003.
-
Cost Projections for High Temperature Superconductors
Authors:
Paul M. Grant,
Thomas P. Sheahen
Abstract:
It is generally argued that for high-temperature superconductors (HTS) to be cost-competitive in power applications, the wire will have to sell for about $10 per kiloampere meter ($10/kAm) for operation at 77 K (e.g., NbTi costs around $1/kAm and Nb3Sn around $8, each at 4.2 K). Given what is already known about the critical current performance of Pb-stabilized Bi-2223 (BSCCO), this cost target…
▽ More
It is generally argued that for high-temperature superconductors (HTS) to be cost-competitive in power applications, the wire will have to sell for about $10 per kiloampere meter ($10/kAm) for operation at 77 K (e.g., NbTi costs around $1/kAm and Nb3Sn around $8, each at 4.2 K). Given what is already known about the critical current performance of Pb-stabilized Bi-2223 (BSCCO), this cost target may be extremely difficult to realistically achieve for silver-sheathed BSCCO produced by the oxide-powder-in-tube (OPIT) technique. In this paper, we examine the cost of component materials, add reasonable estimates for labor and related costs, and arrive at a likely cost/performance (C/P) figure. We also estimate the capital cost of a factory to produce HTS conductor by a particular coated conductor method, and calculate the necessary production-output and performance parameters necessary to manufacture 10 km/yr of wire and its associated C/P. Our results indicate that the real C/P seen by the customer will remain substantially above this $10/kAm target for some time to come.
△ Less
Submitted 21 February, 2002;
originally announced February 2002.
