Showing 1–28 of 28 results for author: Govenius, J

Measurement of microwave photon correlations at millikelvin with a thermal detector

Authors: Aarne Keränen, Qi-Ming Chen, András Gunyhó, Priyank Singh, Jian Ma, Visa Vesterinen, Joonas Govenius, Mikko Möttönen

Abstract: Microwave photons are important carriers of quantum information in many promising platforms for quantum computing. They can be routinely generated, controlled, and teleported in experiments, indicating a variety of applications in quantum technology. However, observation of quantum statistical properties of microwave photons remains demanding: The energy of several microwave photons is considerabl… ▽ More Microwave photons are important carriers of quantum information in many promising platforms for quantum computing. They can be routinely generated, controlled, and teleported in experiments, indicating a variety of applications in quantum technology. However, observation of quantum statistical properties of microwave photons remains demanding: The energy of several microwave photons is considerably smaller than the thermal fluctuation of any room-temperature detector, while amplification necessarily induces noise. Here, we present a measurement technique with a nanobolometer that directly measures the photon statistics at millikelvin and overcomes this trade-off. We apply our method to thermal states generated by a blackbody radiator operating in the regime of circuit quantum electrodynamics. We demonstrate the photon number resolvedness of the nanobolometer, and reveal the n(n+1)-scaling law of the photon number variance as indicated by the Bose--Einstein distribution. By engineering the coherent and incoherent proportions of the input field, we observe the transition between super-Poissonian and Poissonian statistics of the microwave photons from the bolometric second-order correlation measurement. This technique is poised to serve in fundamental tests of quantum mechanics with microwave photons and function as a scalable readout solution for a quantum information processor. △ Less

Submitted 6 July, 2024; originally announced July 2024.

Equivalence of flexible stripline and coaxial cables for superconducting qubit control and readout pulses

Authors: V. Y. Monarkha, S. Simbierowicz, M. Borrelli, R. van Gulik, N. Drobotun, D. Kuitenbrouwer, D. Bouman, D. Datta, P. Eskelinen, E. Mannila, J. Kaikkonen, V. Vesterinen, J. Govenius, R. E. Lake

Abstract: We report a comparative study on microwave control lines for a transmon qubit using: (i) flexible stripline transmission lines, and (ii) semi-rigid coaxial cables. During each experiment we performed repeated measurements of the energy relaxation and coherence times of a transmon qubit using one of the wiring configurations. Each measurement run spanned 70 h to 250 h of measurement time, and four… ▽ More We report a comparative study on microwave control lines for a transmon qubit using: (i) flexible stripline transmission lines, and (ii) semi-rigid coaxial cables. During each experiment we performed repeated measurements of the energy relaxation and coherence times of a transmon qubit using one of the wiring configurations. Each measurement run spanned 70 h to 250 h of measurement time, and four separate cooldowns were performed so that each configuration could be tested twice. From these datasets we observe that changing the microwave control lines from coaxial cables to flexible stripline transmission lines does not have a measurable effect on coherence compared to thermal cycling the system, or random coherence fluctuations. Our results open up the possibility of large scale integration of qubit control lines with integrated component with planar layouts on flexible substrate. △ Less

Submitted 15 May, 2024; originally announced May 2024.

Comments: 6 pages, 2 figures

Efficient electronic cooling above 2 K by niobium-based superconducting tunnel junctions

Authors: J. Hätinen, A. Ronzani, R. P. Loreto, E. Mykkänen, A. Kemppinen, K. Viisanen, T. Rantanen, J. Geisor, J. Lehtinen, M. Ribeiro, J-P. Kaikkonen, O. Prakash, V. Vesterinen, W. Förbom, E. T. Mannila, M. Kervinen, J. Govenius, M. Prunnila

Abstract: Numerous applications, from industrial non-destructive imaging through ultra-sensitive photon counting to various implementations of solid-state quantum computers require low temperatures for their sensor and processor chips. Replacing the bulky cryo-liquid based cooling stages of cryo-enabled instruments by chip scale refrigeration is envisioned to disruptively reduce the system size similarly as… ▽ More Numerous applications, from industrial non-destructive imaging through ultra-sensitive photon counting to various implementations of solid-state quantum computers require low temperatures for their sensor and processor chips. Replacing the bulky cryo-liquid based cooling stages of cryo-enabled instruments by chip scale refrigeration is envisioned to disruptively reduce the system size similarly as microprocessors did for computers. Chip scale cooling has been demonstrated with electronic refrigerators based on tunnel junctions in the sub-1 K temperature range. Here, we extend the operation temperature to above 2 K, thereby, bridging the gap between electronic and pulse tube refrigerators. We report on scalable Al-AlOx-Nb superconducting tunnel junction cooler technology that can deliver electronic cooling power of ~ mW/mm^2, which is enough to demonstrate significant electron temperature reduction of 0.82 K against the phonon bath at 2.4 K (34% relative cooling). Our work shows that the key material of integrated superconducting circuits (niobium) enables powerful cryogenic refrigerator technology. This result is a prerequisite for practical cryogenic chip scale refrigerators and, at the same time, it introduces a new electro-thermal tool for quantum heat transport experiments. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Near-ground state cooling in electromechanics using measurement-based feedback and Josephson parametric amplifier

Authors: Ewa Rej, Richa Cutting, Debopam Datta, Nils Tiencken, Joonas Govenius, Visa Vesterinen, Yulong Liu, Mika A. Sillanpää

Abstract: Feedback-based control of nano- and micromechanical resonators can enable the study of macroscopic quantum phenomena and also sensitive force measurements. Here, we demonstrate the feedback cooling of a low-loss and high-stress macroscopic SiN membrane resonator close to its quantum ground state. We use the microwave optomechanical platform, where the resonator is coupled to a microwave cavity. Th… ▽ More Feedback-based control of nano- and micromechanical resonators can enable the study of macroscopic quantum phenomena and also sensitive force measurements. Here, we demonstrate the feedback cooling of a low-loss and high-stress macroscopic SiN membrane resonator close to its quantum ground state. We use the microwave optomechanical platform, where the resonator is coupled to a microwave cavity. The experiment utilizes a Josephson travelling wave parametric amplifier, which is nearly quantum-limited in added noise, and is important to mitigate resonator heating due to system noise in the feedback loop. We reach a thermal phonon number as low as 1.6, which is limited primarily by microwave-induced heating. We also discuss the sideband asymmetry observed when a weak microwave tone for independent readout is applied in addition to other tones used for the cooling. The asymmetry can be qualitatively attributed to the quantum-mechanical imbalance between emission and absorption. However, we find that the observed asymmetry is only partially due to this quantum effect. In specific situations, the asymmetry is fully dominated by a cavity Kerr effect under multitone irradiation. △ Less

Submitted 4 March, 2024; originally announced March 2024.

Signal crosstalk in a flip-chip quantum processor

Authors: Sandoko Kosen, Hang-Xi Li, Marcus Rommel, Robert Rehammar, Marco Caputo, Leif Grönberg, Jorge Fernández-Pendás, Anton Frisk Kockum, Janka Biznárová, Liangyu Chen, Christian Križan, Andreas Nylander, Amr Osman, Anita Fadavi Roudsari, Daryoush Shiri, Giovanna Tancredi, Joonas Govenius, Jonas Bylander

Abstract: Quantum processors require a signal-delivery architecture with high addressability (low crosstalk) to ensure high performance already at the scale of dozens of qubits. Signal crosstalk causes inadvertent driving of quantum gates, which will adversely affect quantum-gate fidelities in scaled-up devices. Here, we demonstrate packaged flip-chip superconducting quantum processors with signal-crosstalk… ▽ More Quantum processors require a signal-delivery architecture with high addressability (low crosstalk) to ensure high performance already at the scale of dozens of qubits. Signal crosstalk causes inadvertent driving of quantum gates, which will adversely affect quantum-gate fidelities in scaled-up devices. Here, we demonstrate packaged flip-chip superconducting quantum processors with signal-crosstalk performance competitive with those reported in other platforms. For capacitively coupled qubit-drive lines, we find on-resonant crosstalk better than -27 dB (average -37 dB). For inductively coupled magnetic-flux-drive lines, we find less than 0.13 % direct-current flux crosstalk (average 0.05 %). These observed crosstalk levels are adequately small and indicate a decreasing trend with increasing distance, which is promising for further scaling up to larger numbers of qubits. We discuss the implication of our results for the design of a low-crosstalk, on-chip signal delivery architecture, including the influence of a shielding tunnel structure, potential sources of crosstalk, and estimation of crosstalk-induced qubit-gate error in scaled-up quantum processors. △ Less

Submitted 1 March, 2024; originally announced March 2024.

Comments: 16 pages, 12 figures, includes appendices

Cryogenic microwave link for quantum local area networks

Authors: M. Renger, S. Gandorfer, W. Yam, F. Fesquet, M. Handschuh, K. E. Honasoge, F. Kronowetter, Y. Nojiri, M. Partanen, M. Pfeiffer, H. van der Vliet, A. J. Matthews, J. Govenius, R. N. Jabdaraghi, M. Prunnila, A. Marx, F. Deppe, R. Gross, K. G. Fedorov

Abstract: Scalable quantum information processing with superconducting circuits is about to advance from individual processors in single dilution refrigerators to more powerful distributed quantum computing systems located in separate cooling units in order to achieve a practical quantum advantage. Hence, realization of hardware platforms for quantum local area networks (QLANs) compatible with superconducti… ▽ More Scalable quantum information processing with superconducting circuits is about to advance from individual processors in single dilution refrigerators to more powerful distributed quantum computing systems located in separate cooling units in order to achieve a practical quantum advantage. Hence, realization of hardware platforms for quantum local area networks (QLANs) compatible with superconducting technology is of high importance. Here, we demonstrate a basic prototype for a microwave QLAN based on a cryogenic link connecting two individual dilution cryostats over a distance of 6.6m with a base temperature of 52mK in the center. We provide details about the system design, installation, and performance. We employ superconducting coaxial microwave transmission lines to form a quantum communication channel and characterize its potential by demonstrating robust entanglement distribution in the form of two-mode squeezing between remote parties. By preserving entanglement distribution at link temperatures up to 1K, we experimentally verify the fluctuation-dissipation theorem. Consequently, we demonstrate that our system can form the backbone for future distributed quantum computing applications. △ Less

Submitted 23 August, 2023; originally announced August 2023.

Experimentally verified, fast analytic and numerical design of superconducting resonators in flip-chip architectures

Authors: Hang-Xi Li, Daryoush Shiri, Sandoko Kosen, Marcus Rommel, Lert Chayanun, Andreas Nylander, Robert Rehammar, Giovanna Tancredi, Marco Caputo, Kestutis Grigoras, Leif Grönberg, Joonas Govenius, Jonas Bylander

Abstract: In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting resonators must be controlled well to ensure high-fidelity multiplexed readout of qubits. Here we present a method, based on conformal map** techniques, to p… ▽ More In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting resonators must be controlled well to ensure high-fidelity multiplexed readout of qubits. Here we present a method, based on conformal map** techniques, to predict a resonator's parameters directly from its 2D cross-section, without computationally heavy and time-consuming 3D simulation. We demonstrate the method's validity by comparing the calculated resonator frequency and coupling quality factor with those obtained through 3D finite-element-method simulation and by measurement of 15 resonators in a flip-chip-integrated architecture. We achieve a discrepancy of less than 2% between designed and measured frequencies, for 6-GHz resonators. We also propose a design method that reduces the sensitivity of the resonant frequency to variations in the inter-chip spacing. △ Less

Submitted 30 August, 2023; v1 submitted 9 May, 2023; originally announced May 2023.

Comments: Accepted version. 13 pages, 12 figures

Journal ref: IEEE Transactions on Quantum Engineering, vol. 4, pp. 1-12, 2023, Art no. 3101312

Effect of ion irradiation on superconducting thin films

Authors: Katja Kohopää, Alberto Ronzani, Robab Najafi Jabdaraghi, Arijit Bera, Mário Ribeiro, Dibyendu Hazra, Jorden Senior, Mika Prunnila, Joonas Govenius, Janne S. Lehtinen, Antti Kemppinen

Abstract: We demonstrate ion irradiation by argon or gallium as a wafer-scale post-processing method to increase disorder in superconducting thin films. We study several widely used superconductors, both single-elements and compounds. We show that ion irradiation increases normal-state resistivity in all our films, which is expected to enable tuning their superconducting properties, for example, toward high… ▽ More We demonstrate ion irradiation by argon or gallium as a wafer-scale post-processing method to increase disorder in superconducting thin films. We study several widely used superconductors, both single-elements and compounds. We show that ion irradiation increases normal-state resistivity in all our films, which is expected to enable tuning their superconducting properties, for example, toward higher kinetic inductance. We observe an increase of superconducting transition temperature for Al and MoSi, and a decrease for Nb, NbN, and TiN. In MoSi, ion irradiation also improves the mixing of the two materials. We demonstrate fabrication of an amorphous and homogeneous film of MoSi with uniform thickness, which is promising, e.g., for superconducting nanowire single-photon detectors. △ Less

Submitted 19 June, 2024; v1 submitted 20 March, 2023; originally announced March 2023.

Transmon qubit readout fidelity at the threshold for quantum error correction without a quantum-limited amplifier

Authors: Liangyu Chen, Hang-Xi Li, Yong Lu, Christopher W. Warren, Christian J. Križan, Sandoko Kosen, Marcus Rommel, Shahnawaz Ahmed, Amr Osman, Janka Biznárová, Anita Fadavi Roudsari, Benjamin Lienhard, Marco Caputo, Kestutis Grigoras, Leif Grönberg, Joonas Govenius, Anton Frisk Kockum, Per Delsing, Jonas Bylander, Giovanna Tancredi

Abstract: High-fidelity and rapid readout of a qubit state is key to quantum computing and communication, and it is a prerequisite for quantum error correction. We present a readout scheme for superconducting qubits that combines two microwave techniques: applying a shelving technique to the qubit that effectively increases the energy-relaxation time, and a two-tone excitation of the readout resonator to di… ▽ More High-fidelity and rapid readout of a qubit state is key to quantum computing and communication, and it is a prerequisite for quantum error correction. We present a readout scheme for superconducting qubits that combines two microwave techniques: applying a shelving technique to the qubit that effectively increases the energy-relaxation time, and a two-tone excitation of the readout resonator to distinguish among qubit populations in higher energy levels. Using a machine-learning algorithm to post-process the two-tone measurement results further improves the qubit-state assignment fidelity. We perform single-shot frequency-multiplexed qubit readout, with a 140ns readout time, and demonstrate 99.5% assignment fidelity for two-state readout and 96.9% for three-state readout - without using a quantum-limited amplifier. △ Less

Submitted 11 August, 2022; originally announced August 2022.

Propagating Quantum Microwaves: Towards Applications in Communication and Sensing

Authors: Mateo Casariego, Emmanuel Zambrini Cruzeiro, Stefano Gherardini, Tasio Gonzalez-Raya, Rui André, Gonçalo Frazão, Giacomo Catto, Mikko Möttönen, Debopam Datta, Klaara Viisanen, Joonas Govenius, Mika Prunnila, Kimmo Tuominen, Maximilian Reichert, Michael Renger, Kirill G. Fedorov, Frank Deppe, Harriet van der Vliet, A. J. Matthews, Yolanda Fernández, R. Assouly, R. Dassonneville, B. Huard, Mikel Sanz, Yasser Omar

Abstract: The field of propagating quantum microwaves has started to receive considerable attention in the past few years. Motivated at first by the lack of an efficient microwave-to-optical platform that could solve the issue of secure communication between remote superconducting chips, current efforts are starting to reach other areas, from quantum communications to sensing. Here, we attempt at giving a s… ▽ More The field of propagating quantum microwaves has started to receive considerable attention in the past few years. Motivated at first by the lack of an efficient microwave-to-optical platform that could solve the issue of secure communication between remote superconducting chips, current efforts are starting to reach other areas, from quantum communications to sensing. Here, we attempt at giving a state-of-the-art view of the two, pointing at some of the technical and theoretical challenges we need to address, and while providing some novel ideas and directions for future research. Hence, the goal of this paper is to provide a bigger picture, and -- we hope -- to inspire new ideas in quantum communications and sensing: from open-air microwave quantum key distribution to direct detection of dark matter, we expect that the recent efforts and results in quantum microwaves will soon attract a wider audience, not only in the academic community, but also in an industrial environment. △ Less

Submitted 23 May, 2022; originally announced May 2022.

Journal ref: Quantum Sci. Technol. 8 (2), 023001 (2023)

Qubit-compatible substrates with superconducting through-silicon vias

Authors: K. Grigoras, N. Yurttagül, J. -P. Kaikkonen, E. T. Mannila, P. Eskelinen, D. P. Lozano, H. -X. Li, M. Rommel, D. Shiri, N. Tiencken, S. Simbierowicz, A. Ronzani, J. Hätinen, D. Datta, V. Vesterinen, L. Grönberg, J. Biznárová, A. Fadavi Roudsari, S. Kosen, A. Osman, M. Prunnila, J. Hassel, J. Bylander, J. Govenius

Abstract: We fabricate and characterize superconducting through-silicon vias and electrodes suitable for superconducting quantum processors. We measure internal quality factors of a million for test resonators excited at single-photon levels, on chips with superconducting vias used to stitch ground planes on the front and back sides of the chips. This resonator performance is on par with the state of the ar… ▽ More We fabricate and characterize superconducting through-silicon vias and electrodes suitable for superconducting quantum processors. We measure internal quality factors of a million for test resonators excited at single-photon levels, on chips with superconducting vias used to stitch ground planes on the front and back sides of the chips. This resonator performance is on par with the state of the art for silicon-based planar solutions, despite the presence of vias. Via stitching of ground planes is an important enabling technology for increasing the physical size of quantum processor chips, and is a first step toward more complex quantum devices with three-dimensional integration. △ Less

Submitted 8 November, 2022; v1 submitted 25 January, 2022; originally announced January 2022.

Comments: Accepted version. 11 pages, 7 figures, 2 tables with appendices included

Journal ref: IEEE Transactions on Quantum Engineering, vol. 3, pp. 1-10, 2022, Art no. 5100310

Supporting quantum technologies with an ultra-low loss silicon photonics platform

Authors: Matteo Cherchi, Arijit Bera, Antti Kemppinen, Jaani Nissilä, Kirsi Tappura, Marco Caputo, Lauri Lehtimäki, Janne Lehtinen, Joonas Govenius, Tomi Hassinen, Mika Prunnila, Timo Aalto

Abstract: Photonic integrated circuits (PICs) are expected to play a significant role in the ongoing second quantum revolution, thanks to their stability and scalability. Still, major upgrades are needed for available PIC platforms to meet the demanding requirements of quantum devices. In this paper, we present a review of our recent progress in upgrading an unconventional silicon photonics platform towards… ▽ More Photonic integrated circuits (PICs) are expected to play a significant role in the ongoing second quantum revolution, thanks to their stability and scalability. Still, major upgrades are needed for available PIC platforms to meet the demanding requirements of quantum devices. In this paper, we present a review of our recent progress in upgrading an unconventional silicon photonics platform towards such goal, including ultra-low propagation losses, low fibre coupling losses, integration of superconducting elements, Faraday rotators, fast and efficient detectors, as well as phase modulators with low loss and/or low energy consumption. We show the relevance of our developments and of our vision in two main applications: quantum key distribution - to achieve significantly higher key rates and large-scale deployment - and cryogenic quantum computers - to replace electrical connections to the cryostat with optical fibres. △ Less

Submitted 15 February, 2023; v1 submitted 12 January, 2022; originally announced January 2022.

Comments: 24 pages, 14 figures, 159 references

Building Blocks of a Flip-Chip Integrated Superconducting Quantum Processor

Authors: Sandoko Kosen, Hang-Xi Li, Marcus Rommel, Daryoush Shiri, Christopher Warren, Leif Grönberg, Jaakko Salonen, Tahereh Abad, Janka Biznárová, Marco Caputo, Liangyu Chen, Kestutis Grigoras, Göran Johansson, Anton Frisk Kockum, Christian Križan, Daniel Pérez Lozano, Graham Norris, Amr Osman, Jorge Fernández-Pendás, Alberto Ronzani, Anita Fadavi Roudsari, Slawomir Simbierowicz, Giovanna Tancredi, Andreas Wallraff, Christopher Eichler , et al. (2 additional authors not shown)

Abstract: We have integrated single and coupled superconducting transmon qubits into flip-chip modules. Each module consists of two chips -- one quantum chip and one control chip -- that are bump-bonded together. We demonstrate time-averaged coherence times exceeding $90\,μs$, single-qubit gate fidelities exceeding $99.9\%$, and two-qubit gate fidelities above $98.6\%$. We also present device design methods… ▽ More We have integrated single and coupled superconducting transmon qubits into flip-chip modules. Each module consists of two chips -- one quantum chip and one control chip -- that are bump-bonded together. We demonstrate time-averaged coherence times exceeding $90\,μs$, single-qubit gate fidelities exceeding $99.9\%$, and two-qubit gate fidelities above $98.6\%$. We also present device design methods and discuss the sensitivity of device parameters to variation in interchip spacing. Notably, the additional flip-chip fabrication steps do not degrade the qubit performance compared to our baseline state-of-the-art in single-chip, planar circuits. This integration technique can be extended to the realisation of quantum processors accommodating hundreds of qubits in one module as it offers adequate input/output wiring access to all qubits and couplers. △ Less

Submitted 14 June, 2022; v1 submitted 5 December, 2021; originally announced December 2021.

Comments: 33 pages, 12 figures, includes supplementary materials, updated with further calculations on participation ratio and Purcell limit

Journal ref: Quantum Science and Technology, 7(3), 035018 (2022)

Broadband continuous variable entanglement generation using Kerr-free Josephson metamaterial

Authors: Michael Perelshtein, Kirill Petrovnin, Visa Vesterinen, Sina Hamedani Raja, Ilari Lilja, Marco Will, Alexander Savin, Slawomir Simbierowicz, Robab Jabdaraghi, Janne Lehtinen, Leif Grönberg, Juha Hassel, Mika Prunnila, Joonas Govenius, Sorin Paraoanu, Pertti Hakonen

Abstract: Entangled microwave photons form a fundamental resource for quantum information processing and sensing with continuous variables. We use a low-loss Josephson metamaterial comprising superconducting, non-linear, asymmetric inductive elements to generate frequency-entangled photons from vacuum fluctuations at a rate of 2 giga entangled bits per second spanning over 4 GHz bandwidth. The device is ope… ▽ More Entangled microwave photons form a fundamental resource for quantum information processing and sensing with continuous variables. We use a low-loss Josephson metamaterial comprising superconducting, non-linear, asymmetric inductive elements to generate frequency-entangled photons from vacuum fluctuations at a rate of 2 giga entangled bits per second spanning over 4 GHz bandwidth. The device is operated as a traveling wave parametric amplifier under Kerr-relieving biasing conditions. Furthermore, we realize the first successfully demonstration of single-mode squeezing in such devices -- $3.1\pm0.7$\,dB below the zero-point level at half of modulation frequency. △ Less

Submitted 19 March, 2022; v1 submitted 11 November, 2021; originally announced November 2021.

Comments: 15 pages, 9 figures including supplement

Cryogenic sensor enabling broad-band and traceable power measurements

Authors: J. -P. Girard, R. E. Lake, W. Liu, R. Kokkoniemi, E. Visakorpi, J. Govenius, M. Möttönen

Abstract: Recently, great progress has been made in the field of ultrasensitive microwave detectors, reaching even the threshold for utilization in circuit quantum electrodynamics. However, cryogenic sensors lack the compatibility with broad-band metrologically traceable power absorption measurements at ultralow powers, which limits their scope of applications. Here, we demonstrate such measurements using a… ▽ More Recently, great progress has been made in the field of ultrasensitive microwave detectors, reaching even the threshold for utilization in circuit quantum electrodynamics. However, cryogenic sensors lack the compatibility with broad-band metrologically traceable power absorption measurements at ultralow powers, which limits their scope of applications. Here, we demonstrate such measurements using an ultralow-noise nanobolometer which we extend by an additional direct-current (dc) heater input. The tracing of the absorbed power relies on comparing the response of the bolometer between radio frequency (rf) and dc-heating powers traced to the Josephson voltage and quantum Hall resistance. To illustrate this technique, we demonstrate methods to calibrate the power that is delivered to the base temperature stage of a dilution refrigerator using our in-situ power sensor. As an example, we demonstrate the ability to measure accurately the attenuation of a coaxial input line between the frequencies of 50 MHz and 7 GHz with an uncertainty down to 0.1 dB at typical input power of -114 dBm. △ Less

Submitted 3 March, 2023; v1 submitted 11 August, 2021; originally announced August 2021.

Comments: 10 pages, 7 figures

Driving a low critical current Josephson junction array with a mode-locked laser

Authors: J. Nissila, T. Fordell, K. Kohopaa, E. Mykkanen, P. Immonen, R. N. Jabradaghi, E. Bardalen, O. Kieler, B. Karlsen, P. A. Ohlckers, R. Behr, A. J. Manninen, J. Govenius, A. Kemppinen

Abstract: We demonstrate the operation of Josephson junction arrays (JJA) driven by optical pulses generated by a mode-locked laser and an optical time-division multiplexer. A commercial photodiode converts the optical pulses into electrical ones in liquid helium several cm from the JJA. The performance of our custom-made mode-locked laser is sufficient for driving a JJA with low critical current at multipl… ▽ More We demonstrate the operation of Josephson junction arrays (JJA) driven by optical pulses generated by a mode-locked laser and an optical time-division multiplexer. A commercial photodiode converts the optical pulses into electrical ones in liquid helium several cm from the JJA. The performance of our custom-made mode-locked laser is sufficient for driving a JJA with low critical current at multiple Shapiro steps. Our optical approach is a potential enabler for fast and energy-efficient pulse drive without expensive high-bandwidth electrical pulse pattern generator, and without high-bandwidth electrical cabling crossing temperature stages. Our measurements and simulations motivate an improved integration of photodiodes and JJAs using, e.g., flip-chip techniques, in order to improve both the understanding and fidelity of pulse-driven Josephson Arbitrary Waveform Synthesizers (JAWS). △ Less

Submitted 25 September, 2020; originally announced September 2020.

Bolometer operating at the threshold for circuit quantum electrodynamics

Authors: R. Kokkoniemi, J. -P. Girard, D. Hazra, A. Laitinen, J. Govenius, R. E. Lake, I. Sallinen, V. Vesterinen, P. Hakonen, M. Möttönen

Abstract: Radiation sensors based on the heating effect of the absorbed radiation are typically relatively simple to operate and flexible in terms of the input frequency. Consequently, they are widely applied, for example, in gas detection, security, THz imaging, astrophysical observations, and medical applications. A new spectrum of important applications is currently emerging from quantum technology and e… ▽ More Radiation sensors based on the heating effect of the absorbed radiation are typically relatively simple to operate and flexible in terms of the input frequency. Consequently, they are widely applied, for example, in gas detection, security, THz imaging, astrophysical observations, and medical applications. A new spectrum of important applications is currently emerging from quantum technology and especially from electrical circuits behaving quantum mechanically. This circuit quantum electrodynamics (cQED) has given rise to unprecedented single-photon detectors and a quantum computer supreme to the classical supercomputers in a certain task. Thermal sensors are appealing in enhancing these devices since they are not plagued by quantum noise and are smaller, simpler, and consume about six orders of magnitude less power than the commonly used traveling-wave parametric amplifiers. However, despite great progress in the speed and noise levels of thermal sensors, no bolometer to date has proven fast and sensitive enough to provide advantages in cQED. Here, we experimentally demonstrate a bolometer surpassing this threshold with a noise equivalent power of $30\, \rm{zW}/\sqrt{\rm{Hz}}$ on par with the current record while providing two-orders of magnitude shorter thermal time constant of 500 ns. Importantly, both of these characteristic numbers have been measured directly from the same device, which implies a faithful estimation of the calorimetric energy resolution of a single 30-GHz photon. These improvements stem from the utilization of a graphene monolayer as the active material with extremely low specific heat. The minimum demonstrated time constant of 200 ns falls greatly below the state-of-the-art dephasing times of roughly 100 μs for superconducting qubits and meets the timescales of contemporary readout schemes thus enabling the utilization of thermal detectors in cQED. △ Less

Submitted 11 August, 2020; originally announced August 2020.

Nanobolometer with Ultralow Noise Equivalent Power

Authors: R. Kokkoniemi, J. Govenius, V. Vesterinen, R. E. Lake, A. M. Gunyho, K. Y. Tan, S. Simbierowicz, L. Grönberg, J. Lehtinen, M. Prunnila, J. Hassel, O. -P. Saira, M. Möttönen

Abstract: Since the introduction of bolometers more than a century ago, they have been applied in a broad spectrum of contexts ranging from security and the construction industry to particle physics and astronomy. However, emerging technologies and missions call for faster bolometers with lower noise. Here, we demonstrate a nanobolometer that exhibits roughly an order of magnitude lower noise equivalent pow… ▽ More Since the introduction of bolometers more than a century ago, they have been applied in a broad spectrum of contexts ranging from security and the construction industry to particle physics and astronomy. However, emerging technologies and missions call for faster bolometers with lower noise. Here, we demonstrate a nanobolometer that exhibits roughly an order of magnitude lower noise equivalent power, $20\textrm{ zW}/\sqrt{\textrm{Hz}}$, than previously reported for any bolometer. Importantly, it is more than an order of magnitude faster than other low-noise bolometers, with a time constant of 30 $μ$s at $60\textrm{ zW}/\sqrt{\textrm{Hz}}$. These results suggest a calorimetric energy resolution of $0.3\textrm{ zJ}=h\times 0.4$ THz with a time constant of 30 $μ$s. Thus the introduced nanobolometer is a promising candidate for future applications requiring extreme precision and speed such as those in astronomy and terahertz photon counting. △ Less

Submitted 26 June, 2018; v1 submitted 25 June, 2018; originally announced June 2018.

Flux-tunable heat sink for quantum electric circuits

Authors: Matti Partanen, Kuan Yen Tan, Shumpei Masuda, Joonas Govenius, Russell E. Lake, Máté Jenei, Leif Grönberg, Juha Hassel, Slawomir Simbierowicz, Visa Vesterinen, Jani Tuorila, Tapio Ala-Nissila, Mikko Möttönen

Abstract: Superconducting microwave circuits show great potential for practical quantum technological applications such as quantum information processing. However, fast and on-demand initialization of the quantum degrees of freedom in these devices remains a challenge. Here, we experimentally implement a tunable heat sink that is potentially suitable for the initialization of superconducting qubits. Our dev… ▽ More Superconducting microwave circuits show great potential for practical quantum technological applications such as quantum information processing. However, fast and on-demand initialization of the quantum degrees of freedom in these devices remains a challenge. Here, we experimentally implement a tunable heat sink that is potentially suitable for the initialization of superconducting qubits. Our device consists of two coupled resonators. The first resonator has a high quality factor and a fixed frequency whereas the second resonator is designed to have a low quality factor and a tunable resonance frequency. We engineer the low quality factor using an on-chip resistor and the frequency tunability using a superconducting quantum interference device. When the two resonators are in resonance, the photons in the high-quality resonator can be efficiently dissipated. We show that the corresponding loaded quality factor can be tuned from above $10^5$ down to a few thousand at 10 GHz in good quantitative agreement with our theoretical model. △ Less

Submitted 29 December, 2017; originally announced December 2017.

Quantum Gates for Propagating Microwave Photons

Authors: Roope Kokkoniemi, Tuomas Ollikainen, Russell E. Lake, Sakari Saarenpää, Kuan Yen Tan, Janne I. Kokkala, Ceren B. Dağ, Joonas Govenius, Mikko Möttönen

Abstract: We report a generic scheme to implement transmission-type quantum gates for propagating microwave photons, based on a sequence of lumped-element components on transmission lines. By choosing three equidistant superconducting quantum interference devices (SQUIDs) as the components on a single transmission line, we experimentally implement a magnetic-flux-tunable phase shifter and demonstrate that i… ▽ More We report a generic scheme to implement transmission-type quantum gates for propagating microwave photons, based on a sequence of lumped-element components on transmission lines. By choosing three equidistant superconducting quantum interference devices (SQUIDs) as the components on a single transmission line, we experimentally implement a magnetic-flux-tunable phase shifter and demonstrate that it produces a broad range of phase shifts and full transmission within the experimental uncertainty. Together with previously demonstrated beam splitters, these phase shifters can be utilized to implement arbitrary single-qubit gates. Furthermore, we theoretically show that replacing the SQUIDs by superconducting qubits, the phase shifter can be made strongly nonlinear, thus introducing deterministic photon--photon interactions. These results critically complement the previous demonstrations of on-demand single-photon sources and detectors, and hence pave the way for an all-microwave quantum computer based on propagating photons. △ Less

Submitted 7 March, 2017; originally announced March 2017.

Cryogenic microwave source based on nanoscale tunnel junctions

Authors: Shumpei Masuda, Kuan Y. Tan, Matti Partanen, Russell E. Lake, Joonas Govenius, Matti Silveri, Hermann Grabert, Mikko Möttönen

Abstract: We experimentally realize an incoherent microwave source driven by voltage-controlled quantum tunneling of electrons through nanoscale normal-metal--insulator--superconductor junctions coupled to a resonator. We observe the direct conversion of the electronic energy into microwave photons by measuring the power spectrum of the microwave radiation emitted from the resonator. The demonstrated total… ▽ More We experimentally realize an incoherent microwave source driven by voltage-controlled quantum tunneling of electrons through nanoscale normal-metal--insulator--superconductor junctions coupled to a resonator. We observe the direct conversion of the electronic energy into microwave photons by measuring the power spectrum of the microwave radiation emitted from the resonator. The demonstrated total output power exceeds that of 2.5-K thermal radiation although the photon and electron reservoirs are at subkelvin temperatures. Measurements of the output power quantitatively agree with a theoretical model in a wide range of the bias voltages providing information on the electrically-controlled photon creation. The developed photon source is fully compatible with low-temperature electronics and offers convenient in-situ electrical control of the photon emission rate with a predetermined frequency, without relying on intrinsic voltage fluctuations of heated normal-metal components nor suffering from unwanted dissipation in room temperature cables. In addition to its potential applications in microwave photonics, our results provide complementary verification of the working principles of the recently discovered quantum-circuit refrigerator. △ Less

Submitted 20 December, 2016; originally announced December 2016.

Microwave Admittance of Gold-Palladium Nanowires with Proximity-Induced Superconductivity

Authors: Russell E. Lake, Joonas Govenius, Roope Kokkoniemi, Kuan Yen Tan, Matti Partanen, Pauli Virtanen, Mikko Möttönen

Abstract: We report quantitative electrical admittance measurements of diffusive superconductor--normal-metal--superconductor (SNS) junctions at gigahertz frequencies and millikelvin temperatures. The gold-palladium-based SNS junctions are arranged into a chain of superconducting quantum interference devices. The chain is coupled strongly to a multimode microwave resonator with a mode spacing of approximate… ▽ More We report quantitative electrical admittance measurements of diffusive superconductor--normal-metal--superconductor (SNS) junctions at gigahertz frequencies and millikelvin temperatures. The gold-palladium-based SNS junctions are arranged into a chain of superconducting quantum interference devices. The chain is coupled strongly to a multimode microwave resonator with a mode spacing of approximately 0.6 GHz. By measuring the resonance frequencies and quality factors of the resonator modes, we extract the dissipative and reactive parts of the admittance of the chain. We compare the phase and temperature dependence of the admittance near 1 GHz to theory based on the time-dependent Usadel equations. This comparison allows us to identify important discrepancies between theory and experiment that are not resolved by including inelastic scattering or elastic spin-flip scattering in the theory. △ Less

Submitted 9 March, 2017; v1 submitted 29 July, 2016; originally announced July 2016.

Comments: 8 pages, 6 figures

Journal ref: Adv. Electron. Mater. 2017, 1600227

Quantum Circuit Refrigerator

Authors: Kuan Yen Tan, Matti Partanen, Russell E. Lake, Joonas Govenius, Shumpei Masuda, Mikko Möttönen

Abstract: Quantum technology promises revolutionizing applications in information processing, communications, sensing, and modelling. However, efficient on-demand cooling of the functional quantum degrees of freedom remains a major challenge in many solid-state implementations, such as superconducting circuits. Here, we demonstrate direct cooling of a superconducting resonator mode using voltage-controllabl… ▽ More Quantum technology promises revolutionizing applications in information processing, communications, sensing, and modelling. However, efficient on-demand cooling of the functional quantum degrees of freedom remains a major challenge in many solid-state implementations, such as superconducting circuits. Here, we demonstrate direct cooling of a superconducting resonator mode using voltage-controllable quantum tunneling of electrons in a nanoscale refrigerator. This result is revealed by a decreased electron temperature at a resonator-coupled probe resistor, even when the electrons in the refrigerator itself are at an elevated temperature. Our conclusions are verified by control experiments and by a good quantitative agreement between a detailed theoretical model and the direct experimental observations in a broad range of operation voltages and phonon bath temperatures. In the future, the introduced refrigerator can be integrated with different quantum electric devices, potentially enhancing their performance. For the superconducting quantum computer, for example, it may provide an efficient way of initializing the quantum bits. △ Less

Submitted 17 March, 2017; v1 submitted 15 June, 2016; originally announced June 2016.

Comments: 26 pages, 9 figures

Journal ref: Nature Communications 8, 15189 (2017)

Detection of zeptojoule microwave pulses using electrothermal feedback in proximity-induced Josephson junctions

Authors: J. Govenius, R. E. Lake, K. Y. Tan, M. Möttönen

Abstract: We experimentally investigate and utilize electrothermal feedback in a microwave nanobolometer based on a normal-metal ($\mbox{Au}_{x}\mbox{Pd}_{1-x}$) nanowire with proximity-induced superconductivity. The feedback couples the temperature and the electrical degrees of freedom in the nanowire, which both absorbs the incoming microwave radiation, and transduces the temperature change into a radio-f… ▽ More We experimentally investigate and utilize electrothermal feedback in a microwave nanobolometer based on a normal-metal ($\mbox{Au}_{x}\mbox{Pd}_{1-x}$) nanowire with proximity-induced superconductivity. The feedback couples the temperature and the electrical degrees of freedom in the nanowire, which both absorbs the incoming microwave radiation, and transduces the temperature change into a radio-frequency electrical signal. We tune the feedback in situ and access both positive and negative feedback regimes with rich nonlinear dynamics. In particular, strong positive feedback leads to the emergence of two metastable electron temperature states in the millikelvin range. We use these states for efficient threshold detection of coherent 8.4 GHz microwave pulses containing approximately 200 photons on average, corresponding to $1.1 \mbox{ zJ} \approx 7.0 \mbox{ meV}$ of energy. △ Less

Submitted 14 June, 2016; v1 submitted 22 December, 2015; originally announced December 2015.

Journal ref: Phys. Rev. Lett. 117, 030802 (2016)

Observation of quantum-limited heat conduction over macroscopic distances

Authors: Matti Partanen, Kuan Yen Tan, Joonas Govenius, Russell E. Lake, Miika K. Mäkelä, Tuomo Tanttu, Mikko Möttönen

Abstract: The emerging quantum technological apparatuses [1,2], such as the quantum computer [3-5], call for extreme performance in thermal engineering at the nanoscale [6]. Importantly, quantum mechanics sets a fundamental upper limit for the flow of information and heat, which is quantified by the quantum of thermal conductance [7,8]. The physics of this kind of quantum-limited heat conduction has been ex… ▽ More The emerging quantum technological apparatuses [1,2], such as the quantum computer [3-5], call for extreme performance in thermal engineering at the nanoscale [6]. Importantly, quantum mechanics sets a fundamental upper limit for the flow of information and heat, which is quantified by the quantum of thermal conductance [7,8]. The physics of this kind of quantum-limited heat conduction has been experimentally studied for lattice vibrations, or phonons [9], for electromagnetic interactions [10], and for electrons [11]. However, the short distance between the heat-exchanging bodies in the previous experiments hinders the applicability of these systems in quantum technology. Here, we present experimental observations of quantum-limited heat conduction over macroscopic distances extending to a metre. We achieved this striking improvement of four orders of magnitude in the distance by utilizing microwave photons travelling in superconducting transmission lines. Thus it seems that quantum-limited heat conduction has no fundamental restriction in its distance. This work lays the foundation for the integration of normal-metal components into superconducting transmission lines, and hence provides an important tool for circuit quantum electrodynamics [12-14], which is the basis of the emerging superconducting quantum computer [15]. In particular, our results demonstrate that cooling of nanoelectronic devices can be carried out remotely with the help of a far-away engineered heat sink. In addition, quantum-limited heat conduction plays an important role in the contemporary studies of thermodynamics such as fluctuation relations and Maxwell's demon [16,17]. Here, the long distance provided by our results may, for example, lead to an ultimate efficiency of mesoscopic heat engines with promising practical applications [18]. △ Less

Submitted 14 October, 2015; originally announced October 2015.

Comments: 10 pages, 6 figures

Parity measurement of remote qubits using dispersive coupling and photodetection

Authors: J. Govenius, Y. Matsuzaki, I. G. Savenko, M. Möttönen

Abstract: Parity measurement is a key step in many entanglement generation and quantum error correction schemes. We propose a protocol for non-destructive parity measurement of two remote qubits, i.e., macroscopically separated qubits with no direct interaction. The qubits are instead dispersively coupled to separate resonators that radiate to shared photodetectors. The scheme is deterministic in the sense… ▽ More Parity measurement is a key step in many entanglement generation and quantum error correction schemes. We propose a protocol for non-destructive parity measurement of two remote qubits, i.e., macroscopically separated qubits with no direct interaction. The qubits are instead dispersively coupled to separate resonators that radiate to shared photodetectors. The scheme is deterministic in the sense that there is no fundamental bound on the success probability. Compared to previous proposals, our protocol addresses the scenario where number resolving photodetectors are available but the qubit-resonator coupling is time-independent and only dispersive. △ Less

Submitted 7 October, 2015; v1 submitted 28 May, 2015; originally announced May 2015.

Journal ref: Phys. Rev. A 92, 042305 (2015)

Microwave nanobolometer based on proximity Josephson junctions

Authors: J. Govenius, R. E. Lake, K. Y. Tan, V. Pietilä, J. K. Julin, I. J. Maasilta, P. Virtanen, M. Möttönen

Abstract: We introduce a microwave bolometer aimed at high-quantum-efficiency detection of wave packet energy within the framework of circuit quantum electrodynamics, the ultimate goal being single microwave photon detection. We measure the differential thermal conductance between the detector and its heat bath, obtaining values as low as 5 fW/K at 50 mK. This is one tenth of the thermal conductance quantum… ▽ More We introduce a microwave bolometer aimed at high-quantum-efficiency detection of wave packet energy within the framework of circuit quantum electrodynamics, the ultimate goal being single microwave photon detection. We measure the differential thermal conductance between the detector and its heat bath, obtaining values as low as 5 fW/K at 50 mK. This is one tenth of the thermal conductance quantum and corresponds to a theoretical lower bound on noise-equivalent-power of order $10^{-20}$ $W/\sqrt{\mbox{Hz}}$ at 50 mK. By measuring the differential thermal conductance of the same bolometer design in qualitatively different environments and materials, we determine that electron--photon coupling dominates the thermalization of our nanobolometer. △ Less

Submitted 30 July, 2014; v1 submitted 26 March, 2014; originally announced March 2014.

Journal ref: Phys. Rev. B 90, 064505 (2014)

Observation of Entanglement Between Itinerant Microwave Photons and a Superconducting Qubit

Authors: C. Eichler, C. Lang, J. M. Fink, J. Govenius, S. Filipp, A. Wallraff

Abstract: A localized qubit entangled with a propagating quantum field is well suited to study non-local aspects of quantum mechanics and may also provide a channel to communicate between spatially separated nodes in a quantum network. Here, we report the on demand generation and characterization of Bell-type entangled states between a superconducting qubit and propagating microwave fields composed of zero,… ▽ More A localized qubit entangled with a propagating quantum field is well suited to study non-local aspects of quantum mechanics and may also provide a channel to communicate between spatially separated nodes in a quantum network. Here, we report the on demand generation and characterization of Bell-type entangled states between a superconducting qubit and propagating microwave fields composed of zero, one and two-photon Fock states. Using low noise linear amplification and efficient data acquisition we extract all relevant correlations between the qubit and the photon states and demonstrate entanglement with high fidelity. △ Less

Submitted 3 September, 2012; originally announced September 2012.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. Lett. 109, 240501 (2012)