Showing 1–37 of 37 results for author: Good, J

First high peak and average power single-pass THz FEL based on high brightness photoinjector

Authors: M. Krasilnikov, Z. Aboulbanine, G. Adhikari, N. Aftab, A. Asoyan, P. Boonpornprasert, H. Davtyan, G. Georgiev, J. Good, A. Grebinyk, M. Gross, A. Hoffmann, E. Kongmon, X. -K. Li, A. Lueangaramwong, D. Melkumyan, S. Mohanty, R. Niemczyk, A. Oppelt, H. Qian, C. Richard, F. Stephan, G. Vashchenko, T. Weilbach, X. Zhang , et al. (9 additional authors not shown)

Abstract: Advanced experiments using THz pump and X-ray probe pulses at modern free-electron lasers (FELs) like the European X-ray FEL require a frequency-tunable, high-power, narrow-band THz source maintaining the repetition rate and pulse structure of the X-ray pulses. This paper reports the first results from a THz source, that is based on a single-pass high-gain THz FEL operating with a central waveleng… ▽ More Advanced experiments using THz pump and X-ray probe pulses at modern free-electron lasers (FELs) like the European X-ray FEL require a frequency-tunable, high-power, narrow-band THz source maintaining the repetition rate and pulse structure of the X-ray pulses. This paper reports the first results from a THz source, that is based on a single-pass high-gain THz FEL operating with a central wavelength of 100 micrometers. The THz FEL prototype is currently in operation at the Photo Injector Test facility at DESY in Zeuthen (PITZ) and uses the same type of electron source as the European XFEL photo injector. A self-amplified spontaneous emission (SASE) FEL was envisioned as the main mechanism for generating the THz pulses. Although the THz FEL at PITZ is supposed to use the same mechanism as at X-ray facilities, it cannot be considered as a simple scaling of the radiation wavelength because there is a large difference in the number of electrons per radiation wavelength, which is five orders of magnitude higher for the THz case. The bunching factor arising from the electron beam current profile contributes strongly to the initial spontaneous emission starting the FEL process. Proof-of-principle experiments were done at PITZ using an LCLS-I undulator to generate the first high-power, high-repetition-rate single-pass THz FEL radiation. Electron bunches with a beam energy of ~17 MeV and a bunch charge of up to several nC are used to generate THz pulses with a pulse energy of several tens of microjoules. For example, for an electron beam with a charge of ~2.4 nC, more than 100 microjoules were generated at a central wavelength of 100 micrometers. The narrowband spectrum was also demonstrated by spectral measurements. These proof-of-principle experiments pave the way for a tunable, high-repetition-rate THz source providing pulses with energies in the millijoule range. △ Less

Submitted 29 May, 2024; originally announced May 2024.

Comments: (unpublished) for submission to PRAB

Exploring Loss Design Techniques For Decision Tree Robustness To Label Noise

Authors: Lukasz Sztukiewicz, Jack Henry Good, Artur Dubrawski

Abstract: In the real world, data is often noisy, affecting not only the quality of features but also the accuracy of labels. Current research on mitigating label errors stems primarily from advances in deep learning, and a gap exists in exploring interpretable models, particularly those rooted in decision trees. In this study, we investigate whether ideas from deep learning loss design can be applied to im… ▽ More In the real world, data is often noisy, affecting not only the quality of features but also the accuracy of labels. Current research on mitigating label errors stems primarily from advances in deep learning, and a gap exists in exploring interpretable models, particularly those rooted in decision trees. In this study, we investigate whether ideas from deep learning loss design can be applied to improve the robustness of decision trees. In particular, we show that loss correction and symmetric losses, both standard approaches, are not effective. We argue that other directions need to be explored to improve the robustness of decision trees to label noise. △ Less

Submitted 27 May, 2024; originally announced May 2024.

The Observers' Data Access Portal at the Keck Observatory Archive

Authors: T. Oluyide, M. S. Lynn, T. Coda, G. B. Berriman, M. Brown, L. Fuhrman, C. Gelino, J. Good, J. Hayashi, C. -H. Lee, J. Mader, M. A. Swain

Abstract: For all active instruments, the Keck Observatory Archive (KOA) now ingests raw data from the Keck Telescopes within 1 minute of acquisition, quick-look reduced data within 5 minutes of creation, and science ready reduced data for four instruments as they are created by their automated pipelines. On August 1, 2023, KOA released the Observers Data Access Portal (ODAP), which enables observers at the… ▽ More For all active instruments, the Keck Observatory Archive (KOA) now ingests raw data from the Keck Telescopes within 1 minute of acquisition, quick-look reduced data within 5 minutes of creation, and science ready reduced data for four instruments as they are created by their automated pipelines. On August 1, 2023, KOA released the Observers Data Access Portal (ODAP), which enables observers at the telescope and their collaborators anywhere in the world to securely monitor and download science, calibration, and quick-look data as they are ingested into the archive. The portal is built using Python Socket IO.WebSockets that ensure metadata appear in the portal as the data themselves are ingested. The portal itself is a dynamic web interface built with React. It enables users to view and customize metadata fields, filter metadata according to data type, and download data as they are ingested or in bulk through wget scripts. Observers have used the ODAP since its release and have provided feedback that will guide future releases. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Comments: 4 pages, 2 figs, ADASS 2024 proceedings

Processing All-Sky Images At Scale On The Amazon Cloud: A HiPS Example

Authors: G. Bruce Berriman, John C. Good

Abstract: We report here on a project that has developed a practical approach to processing all-sky image collections on cloud platforms, using as an exemplar application the creation of three-color Hierarchical Progressive Survey (HiPS) maps of the 2MASS data set with the Montage Image Mosaic Engine on Amazon Web Services. We will emphasize issues that must be considered by scientists wishing to use cloud… ▽ More We report here on a project that has developed a practical approach to processing all-sky image collections on cloud platforms, using as an exemplar application the creation of three-color Hierarchical Progressive Survey (HiPS) maps of the 2MASS data set with the Montage Image Mosaic Engine on Amazon Web Services. We will emphasize issues that must be considered by scientists wishing to use cloud platforms to perform such parallel processing, so providing a guide for scientists wishing to exploit cloud platforms for similar large-scale processing. A HiPS map is based on the HEALPix sky-tiling scheme. Progressive zooming of a HiPS map reveals an image sampled at ever smaller or larger spatial scales that are defined by the HEALPix standard. Briefly, the approach used by Montage involves creating a base mosaic at the lowest required HEALPix level, usually chosen to match as closely as possible the spatial sampling of the input images, then cutting out the HiPS cells in PNG format from this mosaic. The process is repeated at successive HEALPix levels to create a nested collection of FITS files, from which PNG files are created that are shown in HiPS viewers. Stretching FITS files to produce PNGs is based on an image histogram. For composite regions (up and including the whole sky), the histograms for each tile can be combined to create a composite histogram for the region. Using this single histogram for each of the individual FITS files means all the PNGs are on the same brightness scale and displaying them side by side in a HiPS viewer produces a continuous uniform map across the entire sky. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Comments: 4 pages, 1 figure, ADASS 2024 proceedings

Coordinated Replay Sample Selection for Continual Federated Learning

Authors: Jack Good, Jimit Majmudar, Christophe Dupuy, Jixuan Wang, Charith Peris, Clement Chung, Richard Zemel, Rahul Gupta

Abstract: Continual Federated Learning (CFL) combines Federated Learning (FL), the decentralized learning of a central model on a number of client devices that may not communicate their data, and Continual Learning (CL), the learning of a model from a continual stream of data without kee** the entire history. In CL, the main challenge is \textit{forgetting} what was learned from past data. While replay-ba… ▽ More Continual Federated Learning (CFL) combines Federated Learning (FL), the decentralized learning of a central model on a number of client devices that may not communicate their data, and Continual Learning (CL), the learning of a model from a continual stream of data without kee** the entire history. In CL, the main challenge is \textit{forgetting} what was learned from past data. While replay-based algorithms that keep a small pool of past training data are effective to reduce forgetting, only simple replay sample selection strategies have been applied to CFL in prior work, and no previous work has explored coordination among clients for better sample selection. To bridge this gap, we adapt a replay sample selection objective based on loss gradient diversity to CFL and propose a new relaxation-based selection of samples to optimize the objective. Next, we propose a practical algorithm to coordinate gradient-based replay sample selection across clients without communicating private data. We benchmark our coordinated and uncoordinated replay sample selection algorithms against random sampling-based baselines with language models trained on a large scale de-identified real-world text dataset. We show that gradient-based sample selection methods both boost performance and reduce forgetting compared to random sampling methods, with our coordination method showing gains early in the low replay size regime (when the budget for storing past data is small). △ Less

Submitted 23 October, 2023; originally announced October 2023.

Comments: 7 pages, 6 figures, accepted to EMNLP (industry track)

Analysis of photoinjector transverse phase space in action and phase coordinates

Authors: Houjun Qian, Mikhail Krasilnikov, Zakaria Aboulbanine, Gowri Adhikari, Namra Aftab, Prach Boonpornpras, Georgi Georgiev, James Good, Matthias Gross, Christian Koschitzki, Xiangkun Li, Osip Lishilin, Anusorn Lueangaramwong, Raffael Niemczyk, Anne Oppelt, Guan Shu, Frank Stephan, Grygorii Vashchenko, Tobias Weilbach

Abstract: Photoinjectors are the main high brightness electron sources for X-ray free electron lasers (XFEL). Photoinjector emittance reduction is one of the key knobs for improving XFEL lasing, so precise emittance measurement is critical. It's well known that rms emittance is very sensitive to low intensity tails of particle distributions in the phase space, whose measurement depend on the signal to noise… ▽ More Photoinjectors are the main high brightness electron sources for X-ray free electron lasers (XFEL). Photoinjector emittance reduction is one of the key knobs for improving XFEL lasing, so precise emittance measurement is critical. It's well known that rms emittance is very sensitive to low intensity tails of particle distributions in the phase space, whose measurement depend on the signal to noise ratio (SNR) and image processing procedures. Such sensitivities make the interpretations of beam transverse brightness challenging, leading to different emittance definitions to reduce the impact of tail particles. In this paper, transverse phase space is analyzed in action and phase coordinates for both analytical models and experiments, which give a more intuitive way to calculate the beam core brightness. △ Less

Submitted 18 February, 2022; originally announced February 2022.

Slice energy spread measurement in the low energy photoinjector

Authors: Houjun Qian, Mikhail Krasilnikov, Anusorn Lueangaramwong, Xiangkun Li, Osip Lishilin, Zakaria Aboulbanine, Gowri Adhikari, Namra Aftab, Prach Boonpornprasert, Georgi Georgiev, James Good, Matthias Gross, Christian Koschitzki, Raffael Niemczyk, Anne Oppelt, Guan Shu, Frank Stephan, Grygorii Vashchenko, Tobias Weilbach

Abstract: Slice energy spread is one of the key parameters in free electron laser optimizations, but its accurate measurement is not straightforward. Two recent studies from high energy ($>$100 MeV) photoinjectors at SwissFEL and European XFEL have reported much higher slice energy spread than expected at their XFEL working points (200 - 250 pC). In this paper, a new method for measuring slice energy spread… ▽ More Slice energy spread is one of the key parameters in free electron laser optimizations, but its accurate measurement is not straightforward. Two recent studies from high energy ($>$100 MeV) photoinjectors at SwissFEL and European XFEL have reported much higher slice energy spread than expected at their XFEL working points (200 - 250 pC). In this paper, a new method for measuring slice energy spread at a lower beam energy ($\sim$20 MeV) is proposed and demonstrated at the PhotoInjector Test facility at DESY Zeuthen (PITZ), and the results for 250 pC and 500 pC are much lower than those measured at high energy injectors. △ Less

Submitted 31 January, 2022; originally announced January 2022.

Astronomical Image Processing at Scale With Pegasus and Montage

Authors: G. Bruce Berriman, John C. Good, Ewa Deelman, Ryan Tanaka, Karan Vahi

Abstract: Image processing at scale is a powerful tool for creating new data sets and integrating them with existing data sets and performing analysis and quality assurance investigations. Workflow managers offer advantages in this type of processing, which involves multiple data access and processing steps. Generally, they enable automation of the workflow by locating data and resources, recovery from fail… ▽ More Image processing at scale is a powerful tool for creating new data sets and integrating them with existing data sets and performing analysis and quality assurance investigations. Workflow managers offer advantages in this type of processing, which involves multiple data access and processing steps. Generally, they enable automation of the workflow by locating data and resources, recovery from failures, and monitoring of performance. In this focus demo we demonstrate how the Pegasus Workflow Manager Python API manages image processing to create mosaics with the Montage Image Mosaic engine. Since 2001, Pegasus has been developed and maintained at USC/ISI. Montage was in fact one of the first applications used to design Pegasus and optimize its performance. Pegasus has since found application in many areas of science. LIGO exploited it in making discoveries of black holes. The Vera C. Rubin Observatory used it to compare the cost and performance of processing images on cloud platforms. While these are examples of projects at large scale, small team investigations on local clusters of machines can benefit from Pegasus as well. △ Less

Submitted 22 November, 2021; originally announced November 2021.

Comments: 4 pages, 1 figure, Proceedings of ADASS XXXI

The HETDEX Instrumentation: Hobby-Eberly Telescope Wide Field Upgrade and VIRUS

Authors: Gary J. Hill, Hanshin Lee, Phillip J. MacQueen, Andreas Kelz, Niv Drory, Brian L. Vattiat, John M. Good, Jason Ramsey, Herman Kriel, Trent Peterson, D. L. DePoy, Karl Gebhardt, J. L. Marshall, Sarah E. Tuttle, Svend M. Bauer, Taylor S. Chonis, Maximilian H. Fabricius, Cynthia Froning, Marco Haeuser, Briana L. Indahl, Thomas Jahn, Martin Landriau, Ron Leck, Francesco Montesano, Travis Prochaska , et al. (24 additional authors not shown)

Abstract: The Hobby-Eberly Telescope (HET) Dark Energy Experiment (HETDEX) is undertaking a blind wide-field low-resolution spectroscopic survey of 540 square degrees of sky to identify and derive redshifts for a million Lyman-alpha emitting galaxies (LAEs) in the redshift range 1.9 < z < 3.5. The ultimate goal is to measure the expansion rate of the Universe at this epoch, to sharply constrain cosmological… ▽ More The Hobby-Eberly Telescope (HET) Dark Energy Experiment (HETDEX) is undertaking a blind wide-field low-resolution spectroscopic survey of 540 square degrees of sky to identify and derive redshifts for a million Lyman-alpha emitting galaxies (LAEs) in the redshift range 1.9 < z < 3.5. The ultimate goal is to measure the expansion rate of the Universe at this epoch, to sharply constrain cosmological parameters and thus the nature of dark energy. A major multi-year wide field upgrade (WFU) of the HET was completed in 2016 that substantially increased the field of view to 22 arcminutes diameter and the pupil to 10 meters, by replacing the optical corrector, tracker, and prime focus instrument package and by develo** a new telescope control system. The new, wide-field HET now feeds the Visible Integral-field Replicable Unit Spectrograph (VIRUS), a new low-resolution integral field spectrograph (LRS2), and the Habitable Zone Planet Finder (HPF), a precision near-infrared radial velocity spectrograph. VIRUS consists of 156 identical spectrographs fed by almost 35,000 fibers in 78 integral field units arrayed at the focus of the upgraded HET. VIRUS operates in a bandpass of 3500-5500 Angstroms with resolving power R~800. VIRUS is the first example of large scale replication applied to instrumentation in optical astronomy to achieve spectroscopic surveys of very large areas of sky. This paper presents technical details of the HET WFU and VIRUS, as flowed-down from the HETDEX science requirements, along with experience from commissioning this major telescope upgrade and the innovative instrumentation suite for HETDEX. △ Less

Submitted 7 December, 2021; v1 submitted 7 October, 2021; originally announced October 2021.

Comments: 65 pages, 25 figures, published in the Astronomical Journal; replaced with final published version

Journal ref: AJ 162 298 (2021)

Creating High Quality All-Sky Visualizations of Astronomy Image Data Sets: HiPS and Montage

Authors: G. Bruce Berriman, John C. Good, Vandana Desai, Steven L. Groom

Abstract: We describe a case study to use the Montage image mosaic engine to create maps of the ALLWISE image data set in the Hierarchical Progressive Survey (HiPS) sky-tesselation scheme. Our approach demonstrates that Montage reveals the science content of infrared images in greater detail than has hitherto been possible in HiPS maps. The approach exploits two unique (to our knowledge) characteristics of… ▽ More We describe a case study to use the Montage image mosaic engine to create maps of the ALLWISE image data set in the Hierarchical Progressive Survey (HiPS) sky-tesselation scheme. Our approach demonstrates that Montage reveals the science content of infrared images in greater detail than has hitherto been possible in HiPS maps. The approach exploits two unique (to our knowledge) characteristics of the Montage image mosaic engine: background modeling to rectify the time variable image backgrounds to common levels; and an adaptive image stretch to present images for visualization. The creation of the maps is supported by the development of four new tools that when fully tested will become part of the Montage distribution. The compute intensive part of the processing lies in the reprojection of the images, and we show how we optimized the processing for efficient creation of mosaics that are used in turn to create maps in the HiPS tiling scheme. We plan to apply our methodology to infrared image data sets such a those delivered by Spitzer, 2MASS, IRAS and Planck. △ Less

Submitted 28 January, 2020; originally announced January 2020.

Comments: 4 pages, 2 figures. Submitted to the Proceedings of ADASS2019, Groningen, NL. (Oct 6-10. 2019)

Image Processing in Python With Montage

Authors: John Good, G. Bruce Berriman

Abstract: The Montage image mosaic engine has found wide applicability in astronomy research, integration into processing environments, and is an examplar application for the development of advanced cyber-infrastructure. It is written in C to provide performance and portability. Linking C/C++ libraries to the Python kernel at run time as binary extensions allows them to run under Python at compiled speeds a… ▽ More The Montage image mosaic engine has found wide applicability in astronomy research, integration into processing environments, and is an examplar application for the development of advanced cyber-infrastructure. It is written in C to provide performance and portability. Linking C/C++ libraries to the Python kernel at run time as binary extensions allows them to run under Python at compiled speeds and enables users to take advantage of all the functionality in Python. We have built Python binary extensions of the 59 ANSI-C modules that make up version 5 of the Montage toolkit. This has involved a turning the code into a C library, with driver code fully separated to reproduce the calling sequence of the command-line tools; and then adding Python and C linkage code with the Cython library, which acts as a bridge between general C libraries and the Python interface. We will demonstrate how to use these Python binary extensions to perform image processing, including reprojecting and resampling images, rectifying background emission to a common level, creation of image mosaics that preserve the calibration and astrometric fidelity of the input images, creating visualizations with an adaptive stretch algorithm, processing HEALPix images, and analyzing and managing image metadata. △ Less

Submitted 26 August, 2019; originally announced August 2019.

Comments: 4 pages, 1 figure. Submitted to Proceedings of ADASS XXVIII

Passive Ballistic Microbunching of Non-Ultrarelativistic Electron Bunches using Electromagnetic Wakefields in Dielectric-Lined Waveguides

Authors: Francois Lemery, Philippe Piot, Gayane Amatuni, Prach Boonpornprasert, Ye Lining Chen, James David Good, Bagrat Grigoryan, Matthias Gross, Mikhail Krasilnikov, Osip Lishilin, Gregor Loisch, Anne Oppelt, Sebastian Philipp, Houjun Qian, Yves Renier, Frank Stephan, Igor Zagorodnov

Abstract: Temporally-modulated electron beams have a wide array of applications ranging from the generation of coherently-enhanced electromagnetic radiation to the resonant excitation of electromagnetic wakefields in advanced-accelerator concepts. Likewise producing low-energy ultrashort microbunches could be useful for ultra-fast electron diffraction and new accelerator-based light-source concepts. In this… ▽ More Temporally-modulated electron beams have a wide array of applications ranging from the generation of coherently-enhanced electromagnetic radiation to the resonant excitation of electromagnetic wakefields in advanced-accelerator concepts. Likewise producing low-energy ultrashort microbunches could be useful for ultra-fast electron diffraction and new accelerator-based light-source concepts. In this Letter we propose and experimentally demonstrate a passive microbunching technique capable of forming a picosecond bunch train at $\sim 6$~MeV. The method relies on the excitation of electromagnetic wakefields as the beam propagates through a dielectric-lined waveguide. Owing to the non-ultrarelativistic nature of the beam, the induced energy modulation eventually converts into a density modulation as the beam travels in a following free-space drift. The modulated beam is further accelerated to $\sim20$~MeV while preserving the imparted density modulation. △ Less

Submitted 25 June, 2018; originally announced June 2018.

Journal ref: Phys. Rev. Lett. 122, 044801 (2019)

A Study of the Efficiency of Spatial Indexing Methods Applied to Large Astronomical Databases

Authors: G. B. Berriman, J. C. Good, B. Shiao, T. Donaldson

Abstract: We report the results of a study to compare the performance of two common database indexing methods, HTM and HEALPix, on Solaris and Windows database servers installed with PostgreSQL, and a Windows Server installed with MS SQL Server. The indexing was applied to the 2MASS All-Sky Catalog and to the Hubble Source Catalog, which approximate the diversity of catalogs common in astronomy. On each ser… ▽ More We report the results of a study to compare the performance of two common database indexing methods, HTM and HEALPix, on Solaris and Windows database servers installed with PostgreSQL, and a Windows Server installed with MS SQL Server. The indexing was applied to the 2MASS All-Sky Catalog and to the Hubble Source Catalog, which approximate the diversity of catalogs common in astronomy. On each server, the study compared indexing performance by submitting 1 million queries at each index level with random sky positions and random cone search radius, which was computed on a logarithmic scale between 1 arcsec and 1 degree, and measuring the time to complete the query and write the output. These simulated queries, intended to model realistic use patterns, were run in a uniform way on many combinations of indexing method and indexing depth. The query times in all simulations are strongly I/O-bound and are linear with number of records returned for large numbers of sources. There are, however, considerable differences between simulations, which reveal that hardware I/O throughput is a more important factor in managing the performance of a DBMS than the choice of indexing scheme. The choice of index itself is relatively unimportant: for comparable index levels, the performance is consistent within the scatter of the timings. At small index levels (large cells; e.g. level 4; cell size 3.7 deg), there is large scatter in the timings because of wide variations in the number of sources found in the cells. At larger index levels, performance improves and scatter decreases, but the improvement at level 8 (14 arcmin) and higher is masked to some extent in the timing scatter caused by the range of query sizes. At very high levels (20; 0.0004 arsec), the granularity of the cells becomes so high that a large number of extraneous empty cells begin to degrade performance. △ Less

Submitted 22 June, 2018; originally announced June 2018.

Comments: 4 pages, 4 figures. Submitted for publication in the Proceedings of ADASS XXVII, Santiago, Chile (2017)

Sustaining the Montage Image Mosaic Engine Since 2002

Authors: G. Bruce Berriman, John C. Good

Abstract: This paper describes how we have sustained the Montage image mosaic engine (http://montage.ipac.caltech.edu) first released in 2002, to support the ever-growing scale and complexity of modern data sets. The key to its longevity has been its design as a toolkit written in ANSI-C, with each tool performing one distinct task, for easy integration into scripts, pipelines and workflows. The same code b… ▽ More This paper describes how we have sustained the Montage image mosaic engine (http://montage.ipac.caltech.edu) first released in 2002, to support the ever-growing scale and complexity of modern data sets. The key to its longevity has been its design as a toolkit written in ANSI-C, with each tool performing one distinct task, for easy integration into scripts, pipelines and workflows. The same code base now supports Windows, JavaScript and Python by taking advantage of recent advances in compilers. The design has led to applicability of Montage far beyond what was anticipated when Montage was first built, such as supporting observation planning for the JWST. Moreover, Montage is highly scalable and is in wide use within the IT community to develop advanced, fault-tolerant cyber-infrastructure, such as job schedulers for grids, workflow orchestration, and restructuring techniques for processing complex workflows and pipelines. △ Less

Submitted 11 June, 2018; originally announced June 2018.

Comments: 12 pages, 8 figures. Software and Cyberinfrastructure for Astronomy V (Conference 10707), SPIE SPIE Astronomical Telescopes + Instrumentation, Austin TX. June 10-15, 2018

The KELT Follow-Up Network and Transit False Positive Catalog: Pre-vetted False Positives for TESS

Authors: Karen A. Collins, Kevin I. Collins, Joshua Pepper, Jonathan Labadie-Bartz, Keivan Stassun, B. Scott Gaudi, Daniel Bayliss, Joao Bento, Knicole D. Colón, Dax Feliz, David James, Marshall C. Johnson, Rudolf B. Kuhn, Michael B. Lund, Matthew T. Penny, Joseph E. Rodriguez, Robert J. Siverd, Daniel J. Stevens, Xinyu Yao, George Zhou, Mundra Akshay, Giulio F. Aldi, Cliff Ashcraft, Supachai Awiphan, Özgür Baştürk , et al. (86 additional authors not shown)

Abstract: The Kilodegree Extremely Little Telescope (KELT) project has been conducting a photometric survey for transiting planets orbiting bright stars for over ten years. The KELT images have a pixel scale of ~23"/pixel---very similar to that of NASA's Transiting Exoplanet Survey Satellite (TESS)---as well as a large point spread function, and the KELT reduction pipeline uses a weighted photometric apertu… ▽ More The Kilodegree Extremely Little Telescope (KELT) project has been conducting a photometric survey for transiting planets orbiting bright stars for over ten years. The KELT images have a pixel scale of ~23"/pixel---very similar to that of NASA's Transiting Exoplanet Survey Satellite (TESS)---as well as a large point spread function, and the KELT reduction pipeline uses a weighted photometric aperture with radius 3'. At this angular scale, multiple stars are typically blended in the photometric apertures. In order to identify false positives and confirm transiting exoplanets, we have assembled a follow-up network (KELT-FUN) to conduct imaging with higher spatial resolution, cadence, and photometric precision than the KELT telescopes, as well as spectroscopic observations of the candidate host stars. The KELT-FUN team has followed-up over 1,600 planet candidates since 2011, resulting in more than 20 planet discoveries. Excluding ~450 false alarms of non-astrophysical origin (i.e., instrumental noise or systematics), we present an all-sky catalog of the 1,128 bright stars (6<V<10) that show transit-like features in the KELT light curves, but which were subsequently determined to be astrophysical false positives (FPs) after photometric and/or spectroscopic follow-up observations. The KELT-FUN team continues to pursue KELT and other planet candidates and will eventually follow up certain classes of TESS candidates. The KELT FP catalog will help minimize the duplication of follow-up observations by current and future transit surveys such as TESS. △ Less

Submitted 19 September, 2018; v1 submitted 5 March, 2018; originally announced March 2018.

Comments: Accepted for publication in AJ, 21 pages, 12 figures, 7 tables

The Application of the Montage Image Mosaic Engine To The Visualization Of Astronomical Images

Authors: G. Bruce Berriman, J. C. Good

Abstract: The Montage Image Mosaic Engine was designed as a scalable toolkit, written in C for performance and portability across *nix platforms, that assembles FITS images into mosaics. The code is freely available and has been widely used in the astronomy and IT communities for research, product generation and for develo** next-generation cyber-infrastructure. Recently, it has begun to finding applicabi… ▽ More The Montage Image Mosaic Engine was designed as a scalable toolkit, written in C for performance and portability across *nix platforms, that assembles FITS images into mosaics. The code is freely available and has been widely used in the astronomy and IT communities for research, product generation and for develo** next-generation cyber-infrastructure. Recently, it has begun to finding applicability in the field of visualization. This has come about because the toolkit design allows easy integration into scalable systems that process data for subsequent visualization in a browser or client. And it includes a visualization tool suitable for automation and for integration into Python: mViewer creates, with a single command, complex multi-color images overlaid with coordinate displays, labels, and observation footprints, and includes an adaptive image histogram equalization method that preserves the structure of a stretched image over its dynamic range. The Montage toolkit contains functionality originally developed to support the creation and management of mosaics but which also offers value to visualization: a background rectification algorithm that reveals the faint structure in an image; and tools for creating cutout and down-sampled versions of large images. Version 5 of Montage offers support for visualizing data written in HEALPix sky-tessellation scheme, and functionality for processing and organizing images to comply with the TOAST sky-tessellation scheme required for consumption by the World Wide Telescope (WWT). Four online tutorials enable readers to reproduce and extend all the visualizations presented in this paper. △ Less

Submitted 8 February, 2017; originally announced February 2017.

Comments: 16 pages, 9 figures; accepted for publication in the PASP Special Focus Issue: Techniques and Methods for Astrophysical Data Visualization

Interpolation and Commutant Lifting with Weights

Authors: Jennifer R Good

Abstract: Our two principle goals are generalizations of the commutant lifting theorem and the Nevanlinna-Pick interpolation theorem to the context of Hardy algebras built from $W^*$-correspondences endowed with a sequence of weights. These theorems generalize theorems of Muhly and Solel from 1998 and 2004, respectively, which were proved in settings without weights. Of special interest is the fact that com… ▽ More Our two principle goals are generalizations of the commutant lifting theorem and the Nevanlinna-Pick interpolation theorem to the context of Hardy algebras built from $W^*$-correspondences endowed with a sequence of weights. These theorems generalize theorems of Muhly and Solel from 1998 and 2004, respectively, which were proved in settings without weights. Of special interest is the fact that commutant lifting in our setting is a consequence of Parrott's Lemma; it is inspired by work of Arias. △ Less

Submitted 16 August, 2016; originally announced August 2016.

Comments: 48 pages

MSC Class: 46L07; 46L08; 47L30; 47L55

The Next Generation of the Montage Image Mosaic Toolkit

Authors: G. Bruce Berriman, J. C. Good, B. Rusholme, T. Robitaille

Abstract: The scientific computing landscape has evolved dramatically in the past few years, with new schemes for organizing and storing data that reflect the growth in size and complexity of astronomical data sets. In response to this changing landscape, we are, over the next two years, deploying the next generation of the Montage toolkit ([ascl:1010.036]). The first release (October 2015) supports multi-d… ▽ More The scientific computing landscape has evolved dramatically in the past few years, with new schemes for organizing and storing data that reflect the growth in size and complexity of astronomical data sets. In response to this changing landscape, we are, over the next two years, deploying the next generation of the Montage toolkit ([ascl:1010.036]). The first release (October 2015) supports multi-dimensional data sets ("data cubes"), and insertion of XMP/AVM tags that allows images to "drop-in" to the WWT. The same release offers a beta-version of web-based interactive visualization of images; this includes wrappers for visualization in Python. Subsequent releases will support HEALPix (now standard in cosmic background experiments); incorporation of Montage into package managers (which enable automated management of software builds), and support for a library that will enable Montage to be called directly from Python. This next generation toolkit will inherit the architectural benefits of the current engine - component based tools, ANSI-C portability across Unix platforms and scalability for distributed processing. With the expanded functionality under development, Montage can be viewed not simply as a mosaic engine, but as a scalable, portable toolkit for managing, organizing and processing images. △ Less

Submitted 8 August, 2016; originally announced August 2016.

Comments: 4 pages, ADASS XXV, Sydney, Australia

A case study in adaptable and reusable infrastructure at the Keck Observatory Archive: VO interfaces, moving targets, and more

Authors: G. Bruce Berriman, Richard W. Cohen, Andrew Colson, Christopher R. Gelino, John C. Good, Mihseh Kong, Anastasia C. Laity, Jeffrey A. Mader, Melanie A. Swain, Hien D. Tran, Shin-Ywan Wang

Abstract: This paper describes how the Keck Observatory Archive (KOA) is extending open source software components to develop new services. In August 2015, KOA deployed a program interface to discover public data from all instruments equipped with an imaging mode. The interface complies with version 2 of the Simple Imaging Access Protocol (SIAP), under development by the International Virtual Observatory Al… ▽ More This paper describes how the Keck Observatory Archive (KOA) is extending open source software components to develop new services. In August 2015, KOA deployed a program interface to discover public data from all instruments equipped with an imaging mode. The interface complies with version 2 of the Simple Imaging Access Protocol (SIAP), under development by the International Virtual Observatory Alliance (IVOA), which defines a standard mechanism for discovering images through spatial queries. The heart of the KOA service is an R-tree-based, database-indexing mechanism prototyped by the Virtual Astronomical Observatory (VAO) and further developed by the Montage Image Mosaic project, designed to provide fast access to large imaging data sets as a first step in creating wide-area image mosaics. The KOA service uses the results of the spatial R-tree search to create an SQLite data database for further relational filtering. The service uses a JSON configuration file to describe the association between instrument parameters and the service query parameters, and to make it applicable beyond the Keck instruments. The R-tree program was itself extended to support temporal (in addition to spatial) indexing, in response to requests from the planetary science community for a search engine to discover observations of Solar System objects. With this 3D-indexing scheme, the service performs very fast time and spatial matches between the target ephemerides, obtained from the JPL SPICE service. Our experiments indicate these matches can be more than 100 times faster than when separating temporal and spatial searches. Images of the tracks of the moving targets, overlaid with the image footprints, are computed with a new command-line visualization tool, mViewer, released with the Montage distribution. The service is currently in test and will be released in Fall 2016. △ Less

Submitted 8 August, 2016; originally announced August 2016.

Comments: 16 pages, 8 figures, 5 tables. SPIE Astronomical Telescopes and Instrumentation, Software and Cyberinfrastructure for Astronomy

Studies on charge production from Cs2Te photocathodes in the PITZ L-band normal conducting radio frequency photo injector

Authors: C. Hernandez-Garcia, M. Kraslinikov, G. Asova, M. Bakr, P. Boonpornprasert, J. Good, M. Gross, H. Huck, I. Isaev, D. Kalantaryan, M. Khojoyan, G. Kourkafas, O. Lishilin, D. Malyutin, D. Melkumyan, A. Oppelt, M. Otevrel, G. Pathak, Y. Renier, T. Rublack, F. Stephan, G. Vashchenko, Q. Zhao

Abstract: This paper discusses the behavior of electron bunch charge produced in an L-band normal conducting radio frequency cavity (RF gun) from Cs2Te photocathodes illuminated with ps-long UV laser pulses when the laser transverse distribution consists of a flat-top core with Gaussian-like decaying halo. The produced charge shows a linear dependence at low laser pulse energies as expected in the quantum e… ▽ More This paper discusses the behavior of electron bunch charge produced in an L-band normal conducting radio frequency cavity (RF gun) from Cs2Te photocathodes illuminated with ps-long UV laser pulses when the laser transverse distribution consists of a flat-top core with Gaussian-like decaying halo. The produced charge shows a linear dependence at low laser pulse energies as expected in the quantum efficiency limited emission regime, while its dependence on laser pulse energy is observed to be much weaker for higher values, due to space charge limited emission. However, direct plug-in of experimental parameters into the space charge tracking code ASTRA yields lower output charge in the space charge limited regime compared to measured values. The rate of increase of the produced charge at high laser pulse energies close to the space charge limited emission regime seems to be proportional to the amount of halo present in the radial laser profile since the charge from the core has saturated already. By utilizing core + halo particle distributions based on measured radial laser profiles, ASTRA simulations and semi-analytical emission models reproduce the behavior of the measured charge for a wide range of RF gun and laser operational parameters within the measurement uncertainties. △ Less

Submitted 1 July, 2016; originally announced July 2016.

Comments: 15 pages, 16 figures, 2 tables

Significant problems in FITS limit its use in modern astronomical research

Authors: Brian Thomas, Tim Jenness, Frossie Economou, Perry Greenfield, Paul Hirst, David S. Berry, Erik Bray, Norman Gray, Demitri Muna James Turner, Miguel de Val-Borro, Juande Santander Vela, David Shupe, John Good, G. Bruce Berriman

Abstract: The Flexible Image Transport System (FITS) standard has been a great boon to astronomy, allowing observatories, scientists and the public to exchange astronomical information easily. The FITS standard is, however, showing its age. Developed in the late 1970s the FITS authors made a number of implementation choices for the format that, while common at the time, are now seen to limit its utility wit… ▽ More The Flexible Image Transport System (FITS) standard has been a great boon to astronomy, allowing observatories, scientists and the public to exchange astronomical information easily. The FITS standard is, however, showing its age. Developed in the late 1970s the FITS authors made a number of implementation choices for the format that, while common at the time, are now seen to limit its utility with modern data. The authors of the FITS standard could not appreciate the challenges which we would be facing today in astronomical computing. Difficulties we now face include, but are not limited to, having to address the need to handle an expanded range of specialized data product types (data models), being more conducive to the networked exchange and storage of data, handling very large datasets and the need to capture significantly more complex metadata and data relationships. There are members of the community today who find some (or all) of these limitations unworkable, and have decided to move ahead with storing data in other formats. This reaction should be taken as a wakeup call to the FITS community to make changes in the FITS standard, or to see its usage fall. In this paper we detail some selected important problems which exist within the FITS standard today. It is not our intention to prescribe specific remedies to these issues; rather, we hope to call attention of the FITS and greater astronomical computing communities to these issues in the hopes that it will spur action to address them. △ Less

Submitted 20 February, 2015; originally announced February 2015.

Comments: Astronomical Data Analysis Software and Systems XXIII. Proceedings of a meeting held 29 September - 3 October 2013 at Waikoloa Beach Marriott, Hawaii, USA. Edited by N. Manset and P. Forshay ASP conference series, vol. 485, 2014, p.351

Learning from FITS: Limitations in use in modern astronomical research

Authors: Brian Thomas, Tim Jenness, Frossie Economou, Perry Greenfield, Paul Hirst, David S. Berry, Erik Bray, Norman Gray, Demitri Muna, James Turner, Miguel de Val-Borro, Juande Santander-Vela, David Shupe, John Good, G. Bruce Berriman, Slava Kitaeff, Jonathan Fay, Omar Laurino, Anastasia Alexov, Walter Landry, Joe Masters, Adam Brazier, Reinhold Schaaf, Kevin Edwards, Russell O. Redman , et al. (13 additional authors not shown)

Abstract: The Flexible Image Transport System (FITS) standard has been a great boon to astronomy, allowing observatories, scientists and the public to exchange astronomical information easily. The FITS standard, however, is showing its age. Developed in the late 1970s, the FITS authors made a number of implementation choices that, while common at the time, are now seen to limit its utility with modern data.… ▽ More The Flexible Image Transport System (FITS) standard has been a great boon to astronomy, allowing observatories, scientists and the public to exchange astronomical information easily. The FITS standard, however, is showing its age. Developed in the late 1970s, the FITS authors made a number of implementation choices that, while common at the time, are now seen to limit its utility with modern data. The authors of the FITS standard could not anticipate the challenges which we are facing today in astronomical computing. Difficulties we now face include, but are not limited to, addressing the need to handle an expanded range of specialized data product types (data models), being more conducive to the networked exchange and storage of data, handling very large datasets, and capturing significantly more complex metadata and data relationships. There are members of the community today who find some or all of these limitations unworkable, and have decided to move ahead with storing data in other formats. If this fragmentation continues, we risk abandoning the advantages of broad interoperability, and ready archivability, that the FITS format provides for astronomy. In this paper we detail some selected important problems which exist within the FITS standard today. These problems may provide insight into deeper underlying issues which reside in the format and we provide a discussion of some lessons learned. It is not our intention here to prescribe specific remedies to these issues; rather, it is to call attention of the FITS and greater astronomical computing communities to these problems in the hope that it will spur action to address them. △ Less

Submitted 10 February, 2015; v1 submitted 3 February, 2015; originally announced February 2015.

Creating A Galactic Plane Atlas With Amazon Web Services

Authors: G. Bruce Berriman, Ewa Deelman, John Good, Gideon Juve, Jamie Kinney, Ann Merrihew, Mats Rynge

Abstract: This paper describes by example how astronomers can use cloud-computing resources offered by Amazon Web Services (AWS) to create new datasets at scale. We have created from existing surveys an atlas of the Galactic Plane at 16 wavelengths from 1 μm to 24 μm with pixels co-registered at spatial sampling of 1 arcsec. We explain how open source tools support management and operation of a virtual clus… ▽ More This paper describes by example how astronomers can use cloud-computing resources offered by Amazon Web Services (AWS) to create new datasets at scale. We have created from existing surveys an atlas of the Galactic Plane at 16 wavelengths from 1 μm to 24 μm with pixels co-registered at spatial sampling of 1 arcsec. We explain how open source tools support management and operation of a virtual cluster on AWS platforms to process data at scale, and describe the technical issues that users will need to consider, such as optimization of resources, resource costs, and management of virtual machine instances. △ Less

Submitted 23 December, 2013; originally announced December 2013.

Comments: 7 pages, 1 table, 2 figures. Submitted to IEEE Special Edition on Computing in Astronomy

The NASA Exoplanet Archive: Data and Tools for Exoplanet Research

Authors: R. L. Akeson, X. Chen, D. Ciardi, M. Crane, J. Good, M. Harbut, E. Jackson, S. R. Kane, A. C. Laity, S. Leifer, M. Lynn, D. L. McElroy, M. Papin, P. Plavchan, S. V. Ramirez, R. Rey, K. von Braun, M. Wittman, M. Abajian, B. Ali, C. Beichman, A. Beekley, G. B. Berriman, S. Berukoff, G. Bryden , et al. (10 additional authors not shown)

Abstract: We describe the contents and functionality of the NASA Exoplanet Archive, a database and tool set funded by NASA to support astronomers in the exoplanet community. The current content of the database includes interactive tables containing properties of all published exoplanets, Kepler planet candidates, threshold-crossing events, data validation reports and target stellar parameters, light curves… ▽ More We describe the contents and functionality of the NASA Exoplanet Archive, a database and tool set funded by NASA to support astronomers in the exoplanet community. The current content of the database includes interactive tables containing properties of all published exoplanets, Kepler planet candidates, threshold-crossing events, data validation reports and target stellar parameters, light curves from the Kepler and CoRoT missions and from several ground-based surveys, and spectra and radial velocity measurements from the literature. Tools provided to work with these data include a transit ephemeris predictor, both for single planets and for observing locations, light curve viewing and normalization utilities, and a periodogram and phased light curve service. The archive can be accessed at http://exoplanetarchive.ipac.caltech.edu. △ Less

Submitted 10 July, 2013; originally announced July 2013.

Comments: Accepted for publication in the Publications of the Astronomical Society of the Pacific, 4 figures

The Influence of Motion and Stress on Optical Fibers

Authors: Jeremy D. Murphy, Gary J. Hill, Phillip J. MacQueen, Trey Taylor, Ian Soukup, Walter Moreira, Mark E. Cornell, John Good, Seth Anderson, Lindsay Fuller, Hanshin Lee, Andreas Kelz, Marc Rafal, Tom Rafferty, Sarah Tuttle, Brian Vattiat

Abstract: We report on extensive testing carried out on the optical fibers for the VIRUS instrument. The primary result of this work explores how 10+ years of simulated wear on a VIRUS fiber bundle affects both transmission and focal ratio degradation (FRD) of the optical fibers. During the accelerated lifetime tests we continuously monitored the fibers for signs of FRD. We find that transient FRD events we… ▽ More We report on extensive testing carried out on the optical fibers for the VIRUS instrument. The primary result of this work explores how 10+ years of simulated wear on a VIRUS fiber bundle affects both transmission and focal ratio degradation (FRD) of the optical fibers. During the accelerated lifetime tests we continuously monitored the fibers for signs of FRD. We find that transient FRD events were common during the portions of the tests when motion was at telescope slew rates, but dropped to negligible levels during rates of motion typical for science observation. Tests of fiber transmission and FRD conducted both before and after the lifetime tests reveal that while transmission values do not change over the 10+ years of simulated wear, a clear increase in FRD is seen in all 18 fibers tested. This increase in FRD is likely due to microfractures that develop over time from repeated flexure of the fiber bundle, and stands in contrast to the transient FRD events that stem from localized stress and subsequent modal diffusion of light within the fibers. There was no measurable wavelength dependence on the increase in FRD over 350 nm to 600 nm. We also report on bend radius tests conducted on individual fibers and find the 266 microns VIRUS fibers to be immune to bending-induced FRD at bend radii of R > 10cm. Below this bend radius FRD increases slightly with decreasing radius. Lastly, we give details of a degradation seen in the fiber bundle currently deployed on the Mitchell Spectrograph (formally VIRUS-P) at McDonald Observatory. The degradation is shown to be caused by a localized shear in a select number of optical fibers that leads to an explosive form of FRD. In a few fibers, the overall transmission loss through the instrument can exceed 80%. △ Less

Submitted 1 May, 2013; originally announced May 2013.

Comments: 19 pages, 22 figures

Journal ref: 2012SPIE.8446E..5FM

Connecting the time domain community with the Virtual Astronomical Observatory

Authors: Matthew J. Graham, S. G. Djorgovski, Ciro Donalek, Andrew J. Drake, Ashish A. Mahabal, Raymond L. Plante, Jeffrey Kantor, John C. Good

Abstract: The time domain has been identified as one of the most important areas of astronomical research for the next decade. The Virtual Observatory is in the vanguard with dedicated tools and services that enable and facilitate the discovery, dissemination and analysis of time domain data. These range in scope from rapid notifications of time-critical astronomical transients to annotating long-term varia… ▽ More The time domain has been identified as one of the most important areas of astronomical research for the next decade. The Virtual Observatory is in the vanguard with dedicated tools and services that enable and facilitate the discovery, dissemination and analysis of time domain data. These range in scope from rapid notifications of time-critical astronomical transients to annotating long-term variables with the latest modeling results. In this paper, we will review the prior art in these areas and focus on the capabilities that the VAO is bringing to bear in support of time domain science. In particular, we will focus on the issues involved with the heterogeneous collections of (ancillary) data associated with astronomical transients, and the time series characterization and classification tools required by the next generation of sky surveys, such as LSST and SKA. △ Less

Submitted 18 June, 2012; originally announced June 2012.

Comments: Submitted to Proceedings of SPIE Observatory Operations: Strategies, Processes and Systems IV, Amsterdam, 2012 July 2-6

The NStED Periodogram Service and Interface for Public CoRoT Data

Authors: K. von Braun, M. Abajian, A. Beekley, G. B. Berriman, G. Bryden, B. Chan, D. R. Ciardi, J. Good, M. Harbut, S. R. Kane, A. Laity, C. Lau, M. Lynn, D. McElroy, P. Plavchan, M. Regelson, R. Rey, S. V. Ramirez, J. Stauffer, A. Zhang

Abstract: As part of the NASA-CNES agreement, the NASA Star and Exoplanet Database (NStED) serves as the official US portal for the public CoRoT data products. NStED is a general purpose archive with the aim of providing support for NASA's planet finding and characterization goals. Consequently, the NASA Exoplanet Science Institute (NExScI) developed, and NStED adapted, a periodogram service for CoRoT data… ▽ More As part of the NASA-CNES agreement, the NASA Star and Exoplanet Database (NStED) serves as the official US portal for the public CoRoT data products. NStED is a general purpose archive with the aim of providing support for NASA's planet finding and characterization goals. Consequently, the NASA Exoplanet Science Institute (NExScI) developed, and NStED adapted, a periodogram service for CoRoT data to determine periods of variability phenomena and create phased photometric light curves. Through the NStED periodogram interface, the user may choose three different period detection algorithms to use on any photometric time series product, or even upload and analyze their own data. Additionally, the NStED periodogram is remotely accessed by the CoRoT archive as part of its interface. NStED is available at {\bf http://nsted.ipac.caltech.edu}. △ Less

Submitted 11 July, 2011; originally announced July 2011.

Comments: 2 pages, 1 figure. To appear in "Transiting Planets, Vibrating Stars, and Their Connection", Conference Proceedings of the 2nd CoRoT Symposium, Eds: A. Baglin, M. Deleuil, E. Michel, C. Moutou

Montage: a grid portal and software toolkit for science-grade astronomical image mosaicking

Authors: Joseph C. Jacob, Daniel S. Katz, G. Bruce Berriman, John Good, Anastasia C. Laity, Ewa Deelman, Carl Kesselman, Gurmeet Singh, Mei-Hui Su, Thomas A. Prince, Roy Williams

Abstract: Montage is a portable software toolkit for constructing custom, science-grade mosaics by composing multiple astronomical images. The mosaics constructed by Montage preserve the astrometry (position) and photometry (intensity) of the sources in the input images. The mosaic to be constructed is specified by the user in terms of a set of parameters, including dataset and wavelength to be used, locati… ▽ More Montage is a portable software toolkit for constructing custom, science-grade mosaics by composing multiple astronomical images. The mosaics constructed by Montage preserve the astrometry (position) and photometry (intensity) of the sources in the input images. The mosaic to be constructed is specified by the user in terms of a set of parameters, including dataset and wavelength to be used, location and size on the sky, coordinate system and projection, and spatial sampling rate. Many astronomical datasets are massive, and are stored in distributed archives that are, in most cases, remote with respect to the available computational resources. Montage can be run on both single- and multi-processor computers, including clusters and grids. Standard grid tools are used to run Montage in the case where the data or computers used to construct a mosaic are located remotely on the Internet. This paper describes the architecture, algorithms, and usage of Montage as both a software toolkit and as a grid portal. Timing results are provided to show how Montage performance scales with number of processors on a cluster computer. In addition, we compare the performance of two methods of running Montage in parallel on a grid. △ Less

Submitted 24 May, 2010; originally announced May 2010.

Comments: 16 pages, 11 figures

Journal ref: Int. J. Computational Science and Engineering. 2009

The LAEX and NASA portals for CoRoT public data

Authors: E. Solano, K. von Braun, A. Velasco, D. R. Ciardi, R. Gutierrez, D. L. McElroy, M. Lopez, M. Abajian, M. Garcia, B. Ali, L. M. Sarro, G. B. Berriman, G. Bryden, B. Chan, J. Good, S. R. Kane, A. C. Laity, C. Lau, A. N. Payne, P. Plavchan, S. Ramirez, M. Schmitz, J. R. Stauffer, P. L. Wyatt, A. Zhang

Abstract: * Aims. We describe here the main functionalities of the LAEX (Laboratorio de Astrofisica Estelar y Exoplanetas/Laboratory for Stellar Astrophysics and Exoplanets) and NASA portals for CoRoT Public Data. The CoRoT archive at LAEX was opened to the community in January 2009 and is managed in the framework of the Spanish Virtual Observatory. NStED (NASA Star and Exoplanet Database) serves as the C… ▽ More * Aims. We describe here the main functionalities of the LAEX (Laboratorio de Astrofisica Estelar y Exoplanetas/Laboratory for Stellar Astrophysics and Exoplanets) and NASA portals for CoRoT Public Data. The CoRoT archive at LAEX was opened to the community in January 2009 and is managed in the framework of the Spanish Virtual Observatory. NStED (NASA Star and Exoplanet Database) serves as the CoRoT portal for the US astronomical community. NStED is a general purpose stellar and exoplanet archive with the aim of providing support for NASA planet finding and characterisation goals, and the planning and support of NASA and other space missions. CoRoT data at LAEX and NStED can be accessed at http://sdc.laeff.inta.es/corotfa/ and http://nsted.ipac.caltech.edu,respectively. * Methods. Based on considerable experience with astronomical archives, the aforementioned archives are designed with the aim of delivering science-quality data in a simple and efficient way. * Results. LAEX and NStED not only provide access to CoRoT Public Data but furthermore serve a variety of observed and calculated astrophysical data. In particular, NStED provides scientifically validated information on stellar and planetary data related to the search for and characterization of extrasolar planets, and LAEX makes any information from Virtual Observatory services available to the astronomical community. △ Less

Submitted 20 July, 2009; originally announced July 2009.

Comments: Accepted for publication in Astronomy & Astrophysics

The NASA/IPAC/NExScI Star and Exoplanet Database

Authors: G. B. Berriman, B. Ali, R. Baker, K. von Braun, N-M. Chiu, D. R. Ciardi, J. Good, S. R. Kane, M. Kong, A. C. Laity, D. L. McElroy, S. Monkewitz, A. N. Payne, S. Ramirez, M. Schmitz, J. S. Stauffer, P. L. Wyatt

Abstract: The NASA/IPAC/NExScI Star and Exoplanet Database (NStED) is a general purpose stellar archive which supports NASA planet-finding and planet-characterization goals, stellar astrophysics, and the planning of NASA and other space missions. There are two principal components of NStED: a database of 140,000 nearby stars and exoplanet-hosting stars, and an archive dedicated to high precision photometr… ▽ More The NASA/IPAC/NExScI Star and Exoplanet Database (NStED) is a general purpose stellar archive which supports NASA planet-finding and planet-characterization goals, stellar astrophysics, and the planning of NASA and other space missions. There are two principal components of NStED: a database of 140,000 nearby stars and exoplanet-hosting stars, and an archive dedicated to high precision photometric surveys for transiting exoplanets (NStED-ETSS). We present summaries of these components. The NStED stellar database currently serves published parameters for 140,000 stars. These parameters include coordinates, multiplicity, proper motion, parallax, spectral type, multiband photometry, radial velocity, metallicity, chromospheric and coronal activity index, rotation velocity/period, infrared excess. NStED-ETSS currently serves data from the TrES survey of the Kepler field as well as dedicated photometric surveys of four stellar clusters. NStED-ETSS aims to serve both the surveys and the broader astronomical community by archiving these data and making them available in a homogeneous format. △ Less

Submitted 13 March, 2009; originally announced March 2009.

Comments: 4 pages, AIP style

Journal ref: COOL STARS, STELLAR SYSTEMS AND THE SUN: Proceedings of the 15th Cambridge Workshop on Cool Stars, Stellar Systems and the Sun. AIP Conference Proceedings, Volume 1094, pp. 421-424 (2009)

The NStED Stellar and Exoplanet Hosting Star Service

Authors: S. Ramirez, B. Ali, R. Baker, G. B. Berriman, K. von Braun, N-M. Chiu, D. R. Ciardi, J. Good, S. R. Kane, A. C. Laity, D. L. McElroy, S. Monkewitz, A. N. Payne, M. Schmitz, J. R. Stauffer, P. L. Wyatt, A. Zhang

Abstract: The NASA Star and Exoplanet Database (NStED) is a general purpose stellar archive with the aim of providing support for NASA's planet finding and characterization goals, stellar astrophysics, and the planning of NASA and other space missions. There are two principal components of NStED: a database of (currently) 140,000 nearby stars and exoplanet-hosting stars, and an archive dedicated to high p… ▽ More The NASA Star and Exoplanet Database (NStED) is a general purpose stellar archive with the aim of providing support for NASA's planet finding and characterization goals, stellar astrophysics, and the planning of NASA and other space missions. There are two principal components of NStED: a database of (currently) 140,000 nearby stars and exoplanet-hosting stars, and an archive dedicated to high precision photometric surveys for transiting exoplanets. We present a summary of the NStED stellar database, functionality, tools, and user interface. NStED currently serves the following kinds of data for 140,000 stars (where available): coordinates, multiplicity, proper motion, parallax, spectral type, multiband photometry, radial velocity, metallicity, chromospheric and coronal activity index, and rotation velocity/period. Furthermore, the following derived quantities are given wherever possible: distance, effective temperature, mass, radius, luminosity, space motions, and physical/angular dimensions of habitable zone. Queries to NStED can be made using constraints on any combination of the above parameters. In addition, NStED provides tools to derive specific inferred quantities for the stars in the database, cross-referenced with available extra-solar planetary data for those host stars. NStED can be accessed at http://nsted.ipac.caltech.edu △ Less

Submitted 27 June, 2008; originally announced June 2008.

Comments: To appear in the Proceedings of the 253rd IAU Symposium: "Transiting Planets", May 2008, Cambridge, MA. 4 pages, 4 figures

The NStED Exoplanet Transit Survey Service

Authors: K. von Braun, M. Abajian, B. Ali, R. Baker, G. B. Berriman, N-M. Chiu, D. R. Ciardi, J. Good, S. R. Kane, A. C. Laity, D. L. McElroy, S. Monkewitz, A. N. Payne, S. Ramirez, M. Schmitz, J. R. Stauffer, P. L. Wyatt, A. Zhang

Abstract: The NASA Star and Exoplanet Database (NStED) is a general purpose stellar archive with the aim of providing support for NASA's planet finding and characterization goals, stellar astrophysics, and the planning of NASA and other space missions. There are two principal components of NStED: a database of (currently) 140,000 nearby stars and exoplanet-hosting stars, and an archive dedicated to high-p… ▽ More The NASA Star and Exoplanet Database (NStED) is a general purpose stellar archive with the aim of providing support for NASA's planet finding and characterization goals, stellar astrophysics, and the planning of NASA and other space missions. There are two principal components of NStED: a database of (currently) 140,000 nearby stars and exoplanet-hosting stars, and an archive dedicated to high-precision photometric surveys for transiting exoplanets. We present a summary of the latter component: the NStED Exoplanet Transit Survey Service (NStED-ETSS), along with its content, functionality, tools, and user interface. NStED-ETSS currently serves data from the TrES Survey of the Kepler Field as well as dedicated photometric surveys of four stellar clusters. <CA>NStED-ETSS aims to serve both the surveys and the broader astronomical community by archiving these data and making them available in a homogeneous format. Examples of usability of ETSS include investigation of any time-variable phenomena in data sets not studied by the original survey team, application of different techniques or algorithms for planet transit detections, combination of data from different surveys for given objects, statistical studies, etc. NStED-ETSS can be accessed at \tt{http://nsted.ipac.caltech.edu} △ Less

Submitted 24 June, 2008; originally announced June 2008.

Comments: To appear in the Proceedings of the 253rd IAU Symposium: "Transiting Planets", May 2008, Cambridge, MA. 4 pages, 2 figures

Unveiling the Boxy Bulge and Bar of the Andromeda Spiral Galaxy

Authors: Rachael L. Beaton, Steven R. Majewski, Puragra Guhathakurta, Michael F. Skrutskie, Roc M. Cutri, John Good, Richard J. Patterson, E. Athanassoula, Martin Bureau

Abstract: A new, 2.8 deg^2 J,H,K_s infrared survey from the 2MASS 6x program across the extent of the optical disk of the Andromeda (M31) galaxy provides a clear view of the M31 center almost completely unfettered by dust extinction, and reveals a high contrast bulge with extremely boxy isophotes dominating the NIR light to a semi-major axis of ~700''(2.6 kpc). The inner bulge (<~50'') is relatively circu… ▽ More A new, 2.8 deg^2 J,H,K_s infrared survey from the 2MASS 6x program across the extent of the optical disk of the Andromeda (M31) galaxy provides a clear view of the M31 center almost completely unfettered by dust extinction, and reveals a high contrast bulge with extremely boxy isophotes dominating the NIR light to a semi-major axis of ~700''(2.6 kpc). The inner bulge (<~50'') is relatively circular, but shows some isophotal twisting. Beyond this, the ellipticity and boxiness of the bulge increase with radius -- achieving a boxiness that rivals that of any other known disk galaxy observed in the near infrared -- and the position angle is constant at ~50 deg, which is about 10 deg higher than the position angle of the M31 disk. Boxy bulges in highly inclined disks have been shown to be the vertical structure of bars, and self-consistent, N-body modeling specific to the NIR images presented here can reproduce the observed NIR M31 features with a combination of a classical bulge and a boxy bulge/bar. Beyond the boxy bulge region and nearly along the 40 deg position angle of the disk a narrow ridge of infrared flux, which can be identified with the thin part of the bar, more or less symmetrically extends into the inner disk at semi-major axis radii of 700'' to 1200'' or more. Little variation in the morphology or relative brightnesses of these various M31 structures is seen across the NIR bands (i.e., no color gradients are seen). These new data verify that M31 is a barred spiral galaxy like the Milky Way. △ Less

Submitted 9 May, 2006; originally announced May 2006.

Comments: Suibmitted to Astrophysical Journal Letters

The First HET Planet: A Companion to HD 37605

Authors: W. D. Cochran, M. Endl, B. McArthur, D. B. Paulson, V. V. Smith, P. J. MacQueen, R. G. Tull, J. Good, J. Booth, M. Shetrone, B. Roman, S. Odewahn, F. Deglman, M. Graver, M. Soukup, M. L. Villarreal Jr

Abstract: We report the first detection of a planetary-mass companion to a star using the High Resolution Spectrograph (HRS) of the Hobby-Eberly Telescope (HET). The HET-HRS now gives routine radial velocity precision of 2-3 m/s for high SNR observations of quiescent stars. The planetary-mass companion to the metal-rich K0V star HD37605 has an orbital period of 54.23 days, an orbital eccentricity of 0.737… ▽ More We report the first detection of a planetary-mass companion to a star using the High Resolution Spectrograph (HRS) of the Hobby-Eberly Telescope (HET). The HET-HRS now gives routine radial velocity precision of 2-3 m/s for high SNR observations of quiescent stars. The planetary-mass companion to the metal-rich K0V star HD37605 has an orbital period of 54.23 days, an orbital eccentricity of 0.737, and a minimum mass of 2.84 Jupiter masses. The queue-scheduled operation of the Hobby-Eberly Telescope enabled us to discovery of this relatively short-period planet with a total observation time span of just two orbital periods. The ability of queue-scheduled large-aperture telescopes to respond quickly to interesting and important results demonstrates the power of this new approach in searching for extra-solar planets as well as in other ares of research requiring rapid response time critical observations. △ Less

Submitted 7 July, 2004; originally announced July 2004.

Comments: 4 Pages, 2 figures. Accepted in Astrophysical Journal Letters, http://austral.as.utexas.edu/planets/hd37605/hd37605.html

Journal ref: Astrophys.J. 611 (2004) L133-L136

The Digital Sky Project: Prototy** Virtual Observatory Technologies

Authors: R. J Brunner, T. Prince, J. Good, T. Handley, C. Lonsdale, S. G. Djorgovski

Abstract: Astronomy is entering a new era as multiple, large area, digital sky surveys are in production. The resulting datasets are truly remarkable in their own right; however, a revolutionary step arises in the aggregation of complimentary multi-wavelength surveys (i.e., the cross-identification of a billion sources). The federation of these large datasets is already underway, and is producing a major… ▽ More Astronomy is entering a new era as multiple, large area, digital sky surveys are in production. The resulting datasets are truly remarkable in their own right; however, a revolutionary step arises in the aggregation of complimentary multi-wavelength surveys (i.e., the cross-identification of a billion sources). The federation of these large datasets is already underway, and is producing a major paradigm shift as Astronomy has suddenly become an immensely data-rich field. This new paradigm will enable quantitatively and qualitatively new science, from statistical studies of our Galaxy and the large-scale structure in the universe, to discoveries of rare, unusual, or even completely new types of astronomical objects and phenomena. Federating and then exploring these large datasets, however, is an extremely challenging task. The Digital Sky project was initiated with this task in mind and is working to develop the techniques and technologies necessary to solve the problems inherent in federating these large databases, as well as the mining of the resultant aggregate data. △ Less

Submitted 10 November, 2000; originally announced November 2000.

Comments: 8 pages, 3 Figures, uses newpasp.sty (included). To be published in the proceedings of the conference "Virtual Observatories of the Future," editors R.J. Brunner, S.G. Djorgovski, and Alex S. Szalay

Effects of Large CP-violating Soft Phases on Supersymmetric Electroweak Baryogenesis

Authors: M. Brhlik, G. J. Good, G. L. Kane

Abstract: We revisit the results of recent electroweak baryogenesis calculations and include all allowed large CP-violating supersymmetric phases. If the phases are large, the resulting baryon asymmetry can be considerably larger than the observed value $n_B/s \sim 4 \times 10^{-11}$. Much of the asymmetry must therefore be washed out, and we argue that the upper bound on the light Higgs mass is larger th… ▽ More We revisit the results of recent electroweak baryogenesis calculations and include all allowed large CP-violating supersymmetric phases. If the phases are large, the resulting baryon asymmetry can be considerably larger than the observed value $n_B/s \sim 4 \times 10^{-11}$. Much of the asymmetry must therefore be washed out, and we argue that the upper bound on the light Higgs mass is larger than the value reported in previous work. △ Less

Submitted 4 November, 1999; originally announced November 1999.

Comments: 15 pages, 3 figures

Report number: UM-TH-99-09

Journal ref: Phys.Rev.D63:035002,2001

Electric Dipole Moments Do Not Require the CP-violating Phases of Supersymmetry To Be Small

Authors: Michal Brhlik, Gerald J. Good, G. L. Kane

Abstract: We report the first fully general numerical calculation of the neutron and electron dipole moments, including the seven significant phases. We find that there are major regions in the parameter space where none of the phases are required to be small, contrary to the conventional wisdom. The electric dipole moments (EDM's) do provide useful constraints, allowing other regions of parameter space t… ▽ More We report the first fully general numerical calculation of the neutron and electron dipole moments, including the seven significant phases. We find that there are major regions in the parameter space where none of the phases are required to be small, contrary to the conventional wisdom. The electric dipole moments (EDM's) do provide useful constraints, allowing other regions of parameter space to be carved away. We keep all superpartner masses light so agreement with experimental limits arises purely from interesting relations among soft breaking parameters. △ Less

Submitted 2 November, 1998; v1 submitted 22 October, 1998; originally announced October 1998.

Comments: 23 pages, 7 figures; 2 references added

Report number: UM-TH-98-16

Journal ref: Phys. Rev. D 59, 115004 (1999)